Juniper-PPPoE-CONF
Imported Objects
Objects
10 total| Object Name |
|---|
juniPppoeAgentThe agent capabilities definitions for the point-to-point protocol over Ethernet (PPPoE) component of the SNMP agent in JUNOSe family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.33 |
juniPppoeAgentV1The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when AC-NAME and duplicate MAC address indicator objects were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.1 |
juniPppoeAgentV2The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when PADI flag support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.2 |
juniPppoeAgentV3The MIB supported by the SNMP agent for the PPPoE application in the JUNOSe. These capabilities became obsolete when PADN counter support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.3 |
juniPppoeAgentV4The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when the invalid session counter was replaced by separate PADI and PADR invalid session counters, invalid length and invalid tag length counters and service name table support were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.4 |
juniPppoeAgentV5The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when PADR remote-circuit-id field was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.5 |
juniPppoeAgentV6The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when MTU configuration was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.6 |
juniPppoeAgentV7The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when lockout configuration was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.7 |
juniPppoeAgentV8The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when unknownAction option was added to PPPoE service name table.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.8 |
juniPppoeAgentV9The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.33.9 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module