Juniper-SUBSCRIBER-MIB
AI MIB Summary
The Juniper-SUBSCRIBER-MIB provides SNMP access to monitor and manage subscriber session states, authentication status, and bandwidth usage statistics on Juniper Networks broadband network gateways and edge routers. This module enables the tracking of active user sessions, session establishment failures, and per-subscriber resource utilization for policy enforcement and capacity planning.
The Subscriber MIB for the Juniper Networks enterprise.
Main OID:
juniSubscriberMIB.1.3.6.1.4.1.4874.2.2.49
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
juniSubscriberMIBThe Subscriber MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.49 |
juniSubscrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.1 |
juniSubscrLocal OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.1.1 |
juniSubscrLocalTablePermits local configuration associating a remote subscriber's identity with a local interface, for use in circumstances where the remote subscriber's identity cannot be queried directly (e.g. dynamic IPoA operation). SEQUENCE OF JuniSubscrLocalEntry .1.3.6.1.4.1.4874.2.2.49.1.1.1 |
juniSubscrLocalEntryLocal configuration associating a remote subscriber's identity with a local interface. JuniSubscrLocalEntry .1.3.6.1.4.1.4874.2.2.49.1.1.1.1 |
juniSubscrLocalIfIndexThe ifIndex of the interface to which this subscriber information applies. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.1 |
juniSubscrLocalEncapsThe incoming data encapsulation to which this subscriber information applies. An interface may have a unique subscriber identity configured for each incoming data encapsulation it supports. JuniSubscrEncaps .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.2 |
juniSubscrLocalControlWhen set to clear(1), causes the subscriber information in this entry to be cleared. When set to ok(0), there is no effect and subscriber information is unchanged. When read, always returns a value of ok(0). No other object in this entry can be set simultaneously, otherwise an InconsistentValue error is reported.rw Enumeration .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.3 |
juniSubscrLocalNamePrefixIf enabled, indicates whether the value of juniSubscrLocalName is a prefix rather than a full name.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.4 |
juniSubscrLocalNameThe subscriber's name. If juniSubscrLocalNamePrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber name. The full name is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber.rw DisplayString .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.5 |
juniSubscrLocalPasswordPrefixIf enabled, indicates whether the value of juniSubscrLocalPassword prefix rather than a full password.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.6 |
juniSubscrLocalPasswordThe subscriber's password. If juniSubscrLocalPasswordPrefix has the value 'enabled', the value of this object serves as the prefix of a full subscriber password. The full password is constructed by appending local geographic information (slot, port, etc.) that uniquely distinguishes the subscriber.rw DisplayString .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.7 |
juniSubscrLocalDomainThe subscriber's domain.rw DisplayString .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.8 |
juniSubscrLocalAuthenticationWhen enabled, the interface performs authentication with RADIUS server using the configured subscriber information and associated with the incoming data encapsulation (juniSubscriberLocalEncaps).rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.49.1.1.1.1.9 |
juniSubscriberMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.4 |
juniSubscriberMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.4.1 |
juniSubscriberComplianceObsolete compliance statement for systems supporting subscriber operation. This statement became obsolete when local authentication support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.49.4.1.1 |
juniSubscriberCompliance2The compliance statement for systems supporting subscriber operation. Unknown .1.3.6.1.4.1.4874.2.2.49.4.1.2 |
juniSubscriberMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.49.4.2 |
juniSubscriberLocalGroupObsolete basic collection of objects providing management of locally-configured subscriber identities in a Juniper product. This group became obsolete when local authentication support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.49.4.2.1 |
juniSubscriberLocalGroup2The basic collection of objects providing management of locally-configured subscriber identities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.49.4.2.2 |