Juniper-MPLS-CONF
Imported Objects
Objects
7 total| Object Name |
|---|
juniMplsAgentThe agent capabilities definitions for the MultiProtocol Label Switching (MPLS) component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.51 |
juniMplsAgentV1The MIB supported by the SNMP agent for the MPLS application in JUNOSe. These capabilities became obsolete when new RowStatus objects were added to the tables in juniMplsMinorLayerConfGroup and juniMplsTunnelProfileConfGroup.obsolete Unknown .1.3.6.1.4.1.4874.5.2.51.1 |
juniMplsAgentV2The MIB supported by the SNMP agent for the MPLS application in JUNOSe. These capabilities became obsolete when the IP TTL Propagate object was added to the MPLS scalar group.obsolete Unknown .1.3.6.1.4.1.4874.5.2.51.2 |
juniMplsAgentV3The MIB supported by the SNMP agent for the MPLS application in JUNOSe. These capabilities became obsolete when some of the objects in that MIB became obsolete.obsolete Unknown .1.3.6.1.4.1.4874.5.2.51.3 |
juniMplsAgentV4The MIB supported by the SNMP agent for the MPLS application in JUNOSe. These capabilities became obsolete when the MPLS-LSR-STD-MIB support is added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.51.4 |
juniMplsAgentV5The MIB supported by the SNMP agent for the MPLS application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.51.5 |
juniMplsAgentV6The MIB supported by the SNMP agent for the MPLS application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.51.6 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module