Juniper-Policy-Manager-CONF
AI MIB Summary
The Juniper-Policy-Manager-CONF MIB enables SNMP-based monitoring and configuration of the Policy Manager component on Juniper E-series routers, specifically exposing policy rule states, match counts, and action counters for traffic filtering and QoS enforcement.
The agent capabilities definitions for the Policy Manager component of the SNMP agent in the Juniper E-series family of products.
Main OID:
juniPolicyManagerAgent.1.3.6.1.4.1.4874.5.2.31
37
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
juniPolicyManagerAgentThe agent capabilities definitions for the Policy Manager component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.31 |
juniPolicyManagerBaseAgentThe basic Policy Manager component of the Policy Manager application. MIB support for each specific policy rule type can run as a subcomponent in addition to this base component. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.1 |
juniPolicyManagerBaseAgentV1The MIB groups supported by the SNMP agent for the base component of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.1.1 |
juniPolicyManagerBaseAgentV2The MIB groups supported by the SNMP agent for the base component of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added for client based policy sharing.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.1.2 |
juniPolicyManagerBaseAgentV3The MIB groups supported by the SNMP agent for the base component of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to allow consideration for ATM cell tax when calculating statistics and rate limiting.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.1.2 |
juniPolicyManagerBaseAgentV4The MIB groups supported by the SNMP agent for the base component of the Policy Manager application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.1.2 |
juniPolicyManagerRateLimitAgentThe rate limit policy management component of the Policy Manager application. MIB support for this specific policy rule type subcomponent can run independently of the other subcomponents but requires the base component. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.2 |
juniPolicyManagerRateLimitAgentV1The MIB group supported by the SNMP agent for the rate limit policy management subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added for new rate limit objects.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.2.1 |
juniPolicyManagerRateLimitAgentV2The MIB group supported by the SNMP agent for the rate limit policy management subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.2.2 |
juniPolicyManagerRateLimitAgentV3The MIB group supported by the SNMP agent for the rate limit policy management subcomponent of the Policy Manager application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.2.3 |
juniPolicyManagerTrafficShapeAgentThe traffic shape policy management component of the Policy Manager application. MIB support for this specific policy rule type subcomponent can run independently of the other subcomponents but requires the base component.obsolete OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.3 |
juniPolicyManagerTrafficShapeAgentV1The MIB group supported by the SNMP agent for the traffic shape policy management subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when the policy shaper capability was moved into the quality of service component.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.3.1 |
juniPolicyManagerLogRulesAgentThe log policy rules component of the Policy Manager application. MIB support for this specific policy rule type subcomponent requires the base component but can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.4 |
juniPolicyManagerLogRulesAgentV1The MIB group supported by the SNMP agent for the log policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.4.1 |
juniPolicyManagerLogRulesAgentV2The MIB group supported by the SNMP agent for the log policy rules subcomponent of the Policy Manager application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.4.2 |
juniPolicyManagerNextHopRulesAgentThe next-hop policy rules component of the Policy Manager application. MIB support for this specific policy rule type subcomponent can run independently of the other subcomponents but requires the base component. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.5 |
juniPolicyManagerNextHopRulesAgentV1The MIB group supported by the SNMP agent for the next-hop policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.5.1 |
juniPolicyManagerNextHopRulesAgentV2The MIB group supported by the SNMP agent for the next-hop policy rules subcomponent of the Policy Manager application in the JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.5.2 |
juniPolicyManagerFilterRulesAgentThe filter policy rules component of the Policy Manager application. MIB support for this specific policy rule type subcomponent requires the base component but can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.6 |
juniPolicyManagerFilterRulesAgentV1The MIB group supported by the SNMP agent for the filter policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.6.1 |
juniPolicyManagerFilterRulesAgentV2The MIB group supported by the SNMP agent for the filter policy rules subcomponent of the Policy Manager application in the JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.6.2 |
juniPolicyManagerNextInterfaceRulesAgentThe next-interface policy rules component of the Policy Manager application. MIB support for this specific policy rule type subcomponent requires the base component but can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.7 |
juniPolicyManagerNextInterfaceRulesAgentV1The MIB group supported by the SNMP agent for the next-interface policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.7.1 |
juniPolicyManagerNextInterfaceRulesAgentV2The MIB group supported by the SNMP agent for the next-interface policy rules subcomponent of the Policy Manager application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.7.2 |
juniPolicyManagerMarkingRulesAgentThe marking policy rules component of the Policy Manager application. MIB support for this specific policy rule type subcomponent requires the base component but can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.8 |
juniPolicyManagerMarkingRulesAgentV1The MIB group supported by the SNMP agent for the marking policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.8.1 |
juniPolicyManagerMarkingRulesAgentV2The MIB group supported by the SNMP agent for the marking policy rules subcomponent of the Policy Manager application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.8.2 |
juniPolicyManagerForwardRulesAgentThe forward policy rules component of the Policy Manager application. MIB support for this specific policy rule type subcomponent requires the base component but can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.9 |
juniPolicyManagerForwardRulesAgentV1The MIB group supported by the SNMP agent for the forward policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added for new forward rules objects.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.9.1 |
juniPolicyManagerForwardRulesAgentV2The MIB group supported by the SNMP agent for the forward policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.9.2 |
juniPolicyManagerForwardRulesAgentV3The MIB group supported by the SNMP agent for the forward policy rules subcomponent of the Policy Manager application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.9.3 |
juniPolicyManagerColorRulesAgentThe color policy rules component of the Policy Manager application. MIB support for this specific policy rule type subcomponent requires the base component but can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.10 |
juniPolicyManagerColorRulesAgentV1The MIB group supported by the SNMP agent for the color policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.10.1 |
juniPolicyManagerColorRulesAgentV2The MIB group supported by the SNMP agent for the color policy rules subcomponent of the Policy Manager application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.10.2 |
juniPolicyManagerTrafficClassRulesAgentThe traffic class policy rules component of the Policy Manager application. MIB support for this specific policy rule type subcomponent requires the base component but can run independently of the other subcomponents. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.31.11 |
juniPolicyManagerTrafficClassRulesAgentV1The MIB group supported by the SNMP agent for the traffic class policy rules subcomponent of the Policy Manager application in JUNOSe. These capabilities became obsolete when support was added to separate precedence from policy rule and apply it to classifier groups within a policy list.obsolete Unknown .1.3.6.1.4.1.4874.5.2.31.11.1 |
juniPolicyManagerTrafficClassRulesAgentV2The MIB group supported by the SNMP agent for the traffic class policy rules subcomponent of the Policy Manager application in the JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.31.11.2 |
More MIBs from Unisphere
Browse all UnisphereMIBs →Juniper-BGP-MIB
SNMP MIB module
673 objects→
Unisphere-Data-BGP-MIB
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
466 objects→
Juniper-RADIUS-CLIENT-MIB
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
397 objects→
Juniper-UNI-ATM-MIB
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
380 objects→
Juniper-AAA-MIB
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
362 objects→
Juniper-POLICY-MIB
SNMP MIB module
348 objects→