Juniper-V35-MIB
The X.21/V.35 Server MIB for the Juniper Networks enterprise.
Main OID:
juniV35MIB.1.3.6.1.4.1.4874.2.2.59
17
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
juniV35MIBThe X.21/V.35 Server MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.59 |
juniV35Objects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.59.1 |
juniV35IfTableThis table contains entries for X.21/V.35 interfaces present in the system. This table provides an extension to the Juniper-HDLC-MIB.juniHdlcIfTable for HDLC interfaces that support X.21/V.35 signalling. SEQUENCE OF JuniV35IfEntry .1.3.6.1.4.1.4874.2.2.59.1.2 |
juniV35IfEntryEach entry describes the characteristics of an X.21/V.35 interface. JuniV35IfEntry .1.3.6.1.4.1.4874.2.2.59.1.2.1 |
juniV35IfIndexThe ifIndex of the X.21/V.35 interface. It has the same value as the juniHdlcIfIndex for the common interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.59.1.2.1.1 |
juniV35IfTypeRead only parameter of interface type X.21/V.35.ro Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.2 |
juniV35IfModeRead only parameter of interface mode of interface X.21/V.35 Data Terminating Equipment(DTE)/Data Communication Equipment(DCE).ro Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.3 |
juniV35IfClockRateThe clock rate setting in hertz for this X.21/V.35 interface. Only the following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64000, 128000, 1024000, 1536000, 2048000, 3072000, 4096000, 4915200, 6144000, and 8192000. If a value other than one of the predefined values is set, then the closest matching value is used. The clock rate parameter is only meaningful when the interface is in DCE mode. When the interface is in DTE mode, the value is simply ignored.rw Unsigned32 UNITS "hertz" .1.3.6.1.4.1.4874.2.2.59.1.2.1.4 |
juniV35IfNrzEncodingThe non-return-to-zero (NRZ) encoding for X.21/V.35 interface. Inverted encoding is provided with NRZI-encoding command, which is non-return-to-zero inverted (NRZI) encoding.rw Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.5 |
juniV35IfTxClockThere is an option of inverting the transmit clock signal for X.21/V.35 interface. Inverting the tranmit clock is used to compensate for skews between the clock and data when transmitting across long cables at fast data rates.rw Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.6 |
juniV35IfIgnoreDcdWhen in X.21/V.35 DTE mode we have the capability of ignoring the DCD signal in determining whether or not an interface is up.rw Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.7 |
juniV35IfLoopbackLoopback interface is configured (or not) for X.21/V.35 interfacerw Enumeration .1.3.6.1.4.1.4874.2.2.59.1.2.1.8 |
juniV35Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.59.4 |
juniV35Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.59.4.1 |
juniV35ComplianceThe compliance statement for entities that implement the Juniper X.21/V.35 MIB. Unknown .1.3.6.1.4.1.4874.2.2.59.4.1.1 |
juniV35Groups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.59.4.2 |
juniV35GroupA collection of objects providing management of X.21/V.35 interfaces in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.59.4.2.1 |