Juniper-UNI-IF-MIB
Imported Objects
Objects
22 total| Object Name |
|---|
juniIfMIBThe Generic Interfaces MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.3 |
juniInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1 |
juniIf OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1 |
juniIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1.1 |
juniIfTableThis table contains a corresponding entry for each entry found in the standard Generic Interfaces MIB ifTable/ifXTable. The entries in this table contain supplementary generic interface characteristics. Entries in ifTable/ifXTable and in this table are created/deleted as a consequence of hardware detection, or of management configuration via standard or enterprise type-specific interface MIBs. SEQUENCE OF JuniIfEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.1 |
juniIfEntryAn entry representing an interface's enterprise-defined generic interface characteristics. JuniIfEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.1.1 |
juniIfTypeIdentifies the type of this interface.ro JuniIfType .1.3.6.1.4.1.4874.2.2.3.1.1.1.1.1.1 |
juniIfInvStackTableA table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'underneath' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs underneath the sub-layer with ifIndex value y, then this table contains: juniIfInvStackStatus.x.y = active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.x.0 = active ifStackStatus.0.x = active This table contains exactly the same number of rows as the ifStackTable, but the rows appear in a different order. SEQUENCE OF JuniIfInvStackEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.2 |
juniIfInvStackEntryInformation on a particular relationship between two sub-layers, specifying that one sub-layer runs underneath the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable. JuniIfInvStackEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.2.1 |
juniIfInvStackStatusThe status of the relationship between two sub-layers. An instance of this object exists for each instance of the ifStackStatus object, and vice versa. For example, if the variable ifStackStatus.H.L exists, then the variable juniIfInvStackStatus.L.H must also exist, and vice versa. In addition, the two variables always have the same value. However, unlike ifStackStatus, the juniIfInvStackStatus object is NOT write-able. A network management application wishing to change a relationship between sub-layers H and L cannot do so by modifying the value of juniIfInvStackStatus.L.H, but must instead modify the value of ifStackStatus.H.L. After the ifStackTable is modified, the change will be reflected in this table.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.3.1.1.1.2.1.1 |
juniIfCountTableThis table contains entries for each interface type's system wide interfaces counts. SEQUENCE OF JuniIfCountEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.3 |
juniIfCountEntryAn entry represents system wide total number of interfaces configured for the particular interface type. JuniIfCountEntry .1.3.6.1.4.1.4874.2.2.3.1.1.1.3.1 |
juniIfCountIfTypeIdentifies the type of this interface. JuniIfType .1.3.6.1.4.1.4874.2.2.3.1.1.1.3.1.1 |
juniIfCountNumberOfInterfacesRepresents system wide total number of interfaces configured for the particular interface type.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.3.1.1.1.3.1.2 |
juniIfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1.4 |
juniIfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1.4.1 |
juniIfComplianceObsolete compliance statement for entities which implement the Juniper Generic Interfaces MIB. Unknown .1.3.6.1.4.1.4874.2.2.3.1.1.4.1.1 |
juniIfCompliance1The compliance statement for entities which implement the Juniper Generic Interfaces MIB. Unknown .1.3.6.1.4.1.4874.2.2.3.1.1.4.1.2 |
juniIfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.3.1.1.4.2 |
juniIfGroupA collection of objects for managing generic interfaces in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.3.1.1.4.2.1 |
juniIfInvStackGroupA collection of objects providing inverted information on the layering of MIB-II interfaces. Unknown .1.3.6.1.4.1.4874.2.2.3.1.1.4.2.2 |
juniIfCountGroupA collection of objects providing interface information on the system wide count of number of interfaces per interface type. Unknown .1.3.6.1.4.1.4874.2.2.3.1.1.4.2.3 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module