KERNEL-READER-SUNMANAGEMENTCENTER-MIB
AI MIB Summary
The KERNEL-READER-SUNMANAGEMENTCENTER-MIB module retrieves kernel-level performance metrics from Sun Management Center agents, specifically monitoring CPU utilization, disk I/O, stream buffer states, virtual memory paging, and swapping rates to enable granular system resource analysis.
The kernel reader mib obtains information from the operating system about kernel based entities, including CPUs, disk drives, streams buffers, VM statistics, etc. This information is used to monitor and report on CPU usage, disk and network I/O, Paging and swapping rates, and so on.
Main OID:
kernelReader.1.3.6.1.4.1.42.2.12.2.2.12
293
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
293 total| Object Name |
|---|
sun OBJECT IDENTIFIER .1.3.6.1.4.1.42 |
prod OBJECT IDENTIFIER .1.3.6.1.4.1.42.2 |
sunsymon OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.12 |
agent OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.12.2 |
modules OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.12.2.2 |
kernelReaderThe kernel reader mib obtains information from the operating system about kernel based entities, including CPUs, disk drives, streams buffers, VM statistics, etc. This information is used to monitor and report on CPU usage, disk and network I/O, Paging and swapping rates, and so on. MODULE-IDENTITY .1.3.6.1.4.1.42.2.12.2.2.12 |
krUserGroupUser related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.1 |
krConsoleUserUser currently logged in on the console.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.1.1 |
krTotNumOfUsersNumber of unique users currently logged in.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.1.2 |
krTotNumOfSessionsNumber of currently active user sessions.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.1.3 |
krPrimaryUserThe login name of the primary user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.1.4 |
krLoadGroupLoad related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.2 |
krSystemLoadAvg1minLoad average of the system over the last 1 minute.ro DisplayString UNITS "Jobs" .1.3.6.1.4.1.42.2.12.2.2.12.2.1 |
krSystemLoadAvg5minLoad average of the system over the last 5 minutes.ro DisplayString UNITS "Jobs" .1.3.6.1.4.1.42.2.12.2.2.12.2.2 |
krSystemLoadAvg15minLoad average of the system over the last 15 minutes.ro DisplayString UNITS "Jobs" .1.3.6.1.4.1.42.2.12.2.2.12.2.3 |
krSystemUpTimeThe total time elapsed since the machine was last rebooted.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.2.4 |
krDisk OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.12.2.2.12.3 |
krDiskDetailGroupDisk detail related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.3.1 |
krDiskDetailTableTable of information about all the disks installed on the system. SEQUENCE OF KrDiskDetailEntry .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1 |
krDiskDetailEntryInformation about a disk installed on the system. KrDiskDetailEntry .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1 |
krDDDiskNameName of the disk (sd0, etc ...).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.1 |
krDiskAliasNameName of the disk alias (c0t0d0, etc).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.2 |
krDiskReadOpRateNumber of read operations per second on the disk.ro DisplayString UNITS "op/sec" .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.3 |
krDiskWriteOpRateNumber of write operations per second on the disk.ro DisplayString UNITS "op/sec" .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.4 |
krDiskOperationRateTotal number of read and write operations per second (read + write) on the disk.ro DisplayString UNITS "op/sec" .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.5 |
krDiskDataReadRateRate of data reads per second from this disk, in Kbytes per second.ro DisplayString UNITS "KB/sec" .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.6 |
krDiskDataWriteRateRate of data writes per second to this disk, in Kbytes per second.ro DisplayString UNITS "KB/secops" .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.7 |
krDiskDataTransferRateRate of data transfers per second to or from this disk, in Kbytes per second.ro DisplayString UNITS "KB/sec" .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.8 |
krDiskAvgWaitTransAverage number of transactions waiting.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.9 |
krDiskAvgRunTransAverage number of transactions running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.10 |
krDiskSrvcTimeGroupDisk load related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.3.2 |
krDiskSrvTableTable of performance related information for all the disks. SEQUENCE OF KrDiskSrvEntry .1.3.6.1.4.1.42.2.12.2.2.12.3.2.1 |
krDiskSrvEntryPerformance related information for one disk. KrDiskSrvEntry .1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1 |
krDSDiskNameName of the disk (sd0, etc ...).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.1 |
krDiskSrvcWaitPctTimePercentage of time there is a transaction waiting for service (wait queue length).ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.2 |
krDiskBusyPctTimePercentage of time the disk is busy (transaction running).ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.3 |
krDiskSrvcAvgWaitTimeThe average wait service time in msec for one disk transaction, either read or write.ro DisplayString UNITS "msec" .1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.4 |
krDiskSrvcAvgTransRunTimeThe average run service time in msec for one disk transaction, either read or write.ro DisplayString UNITS "msec" .1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.5 |
krDiskSrvcAvgTransTimeThe average service (run + wait) time in msec for one disk transaction, either read or write.ro DisplayString UNITS "msec" .1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.6 |
krFileSystem OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.12.2.2.12.4 |
krUFSFileSystemGroupUFS file system related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.4.1 |
krUFSFileTableTable of information about UFS file systems. SEQUENCE OF KrUFSFileEntry .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1 |
krUFSFileEntryInformation about a UFS file system. KrUFSFileEntry .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1 |
krUFSFileSystemIndexThe index for the file system in table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.1 |
krUFSFileSystemMountPointThe full pathname where the file system is mounted.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.2 |
krUFSFileSystemDiskNameThe name of the device (/dev/dsk/...).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.3 |
krUFSFileSystemSizeThe total size of the file system, in Kbytes.ro Integer32 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.4 |
krUFSFileSystemFreeSpaceAvailable disk space in the file system, in Kbytes.ro Integer32 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.5 |
krUFSFreeSpaceForNonSUAvailable disk space in file system for non-superusers, in Kbytes.ro Integer32 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.6 |
krUFSFileSystemPctUsedSpacePercentage of disk space used in the file system.ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.7 |
krUFSTotNumOfInodesThe total number of inodes in the file system.ro Integer32 UNITS "inodes" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.8 |
krUFSTotNumOfInodesAvailThe total number of inodes available in the file system.ro Integer32 UNITS "inodes" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.9 |
krUFSPctInodesUsedPercentage of inodes used in the file system.ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.10 |
krUFSFileSystemSize64The total size of the TeraByte file system, in Kbytes.ro Counter64 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.11 |
krUFSFileSystemFreeSpace64The total Free space in the TeraByte file system, in Kbytes.ro Counter64 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.12 |
krUFSFreeSpaceForNonSU64The total Available space for non-superusers in the TeraByte file system, in Kbytes.ro Counter64 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.13 |
krVXFSFileSystemGroupVXFS file system related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.4.2 |
krVXFSFileTableTable of information about VXFS file systems. SEQUENCE OF KrVXFSFileEntry .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1 |
krVXFSFileEntryInformation about a VXFS file system. KrVXFSFileEntry .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1 |
krVXFSFileSystemIndexThe index of the file system in the table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.1 |
krVXFSFileSystemMountPointThe full pathname where the file system is mounted.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.2 |
krVXFSFileSystemDiskNameThe name of the device (/dev/dsk/...).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.3 |
krVXFSFileSystemSizeThe total size of the file system, in Kbytes.ro Integer32 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.4 |
krVXFSFileSystemFreeSpaceAvailable disk space of the file system, in Kbytes.ro Integer32 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.5 |
krVXFSFreeSpaceForNonSUAvailable disk space in file system for non-superusers, in Kbytes.ro Integer32 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.6 |
krVXFSFileSystemPctUsedSpacePercentage of disk space used in the file system.ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.7 |
krVXFSTotNumOfInodesThe total number of inodes in the file system.ro Integer32 UNITS "inodes" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.8 |
krVXFSTotNumOfInodesAvailThe total number of inodes available in the file system.ro Integer32 UNITS "inodes" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.9 |
krVXFSPctInodesUsedPercentage of inodes used in the file system.ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.10 |
krVXFSFileSystemSize64Total disk space in TeraByte file system, in Kbytes.ro Counter64 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.11 |
krVXFSFileSystemFreeSpace64Total free space in TeraByte file system, in Kbytes.ro Counter64 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.12 |
krVXFSFreeSpaceForNonSU64Available disk space in TeraByte file system for non-superusers, in Kbytes.ro Counter64 UNITS "KB" .1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.13 |
krCPUDetail OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.12.2.2.12.5 |
krCPUUtilGroupCPU utilization related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.1 |
krCPUUtilTableTable of CPU utilization information for all CPUs. SEQUENCE OF KrCPUUtilEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1 |
krCPUUtilEntryCPU utilization information for one CPU. KrCPUUtilEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1 |
krCPUInstanceThe CPU number.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.1 |
krCPUDeltaThe delta of V1(value 1) and V2(value 2), where V1 and V2 are the cumulative CPU clock ticks taken at different times which is either when refresh interval reaches or when the mannual refresh is issued. V1 or V2 is the Sum of CPU_IdleTime, CPU_UserModeTime, CPU_KernelModeTime and CPU_WaitTime. If V1 is the previous value and V2 is the current value then krCPUDelta = V2 - V1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.2 |
krCPUIdleTimeIdle CPU time in percentage of CPU delta. If V1 is the previous value of idle time and V2 is the current value of idle time then krCPUIdleTime = ( V2 - V1 ) * 100 / krCPUDelta .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.3 |
krCPUUserModeTimeTime spent by CPU in user mode in percentage of CPU delta. If V1 is the previous value of user mode time and V2 is the current value of user mode time then krCPUUserModeTime = ( V2 - V1 ) * 100 / krCPUDelta .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.4 |
krCPUKernelModeTimeTime spent by CPU in kernel mode in percentage of CPU delta. If V1 is the previous value of kernel mode time and V2 is the current value of kernel mode time then krCPUKernelModeTime = ( V2 - V1 ) * 100 / krCPUDelta .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.5 |
krCPUTotWaitTimeTotal CPU wait time in percentage of CPU delta. If V1 is the previous value of CPU wait time and V2 is the current value of CPU wait time then krCPUTotWaitTime = ( V2 - V1 ) * 100 / krCPUDelta .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.6 |
krCPUTotIOWaitTimeTotal CPU IO wait time in percentage of CPU delta. If V1 is the previous value of CPU IO wait time and V2 is the current value of CPU IO wait time then krCPUTotIOWaitTime = ( V2 - V1 ) * 100 / krCPUDelta .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.7 |
krCPUTotSwapWaitTimeTotal CPU swap wait time in percentage of CPU delta. If V1 is the previous value of CPU swap wait time and V2 is the current value of CPU swap wait time then krCPUTotSwapWaitTime = ( V2 - V1 ) * 100 / krCPUDelta .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.8 |
krCPUTotPIOWaitTimeTotal CPU peripheral IO wait time in percentage of CPU delta. If V1 is the previous value of CPU peripheral wait time and V2 is the current value of CPU peripheral wait time then krCPUTotPIOWaitTime = ( V2 - V1 ) * 100 / krCPUDelta .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.9 |
krCPUNumOfIdleThreadSchedThe rate of number of idle thread scheduled. If V1 and V2 is the number of idle threads scheduled found at time T1 and T2 respectively then krCPUNumOfIdleThreadSched = (V2 - V1)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.10 |
krCPUProcess OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.12.2.2.12.5.2 |
krCPUProcInStatesGroupStatistics related to numbers of processes in different states. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.2.1 |
krTotProcInRunQueueNumber of processes in run queue.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.2.1.1 |
krTotProcBlockedNumber of processes blocked for resources.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.2.1.2 |
krTotProcReadyInSwapNumber of processes runnable but swapped.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.2.1.3 |
krTotNumberOfCPUsTotal number Of CPUs.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.2.1.4 |
krCPUIOGroupCPU I/O related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.3 |
krCPUIOTableTable of CPU I/O information for all CPUs. SEQUENCE OF KrCPUIOEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1 |
krCPUIOEntryI/O related information for one CPU. KrCPUIOEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1 |
krIOCPUInstanceThe CPU number.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.1 |
krNumPhyBlocksReadThe rate of number of physical blocks read. Number of physical blocks read is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumPhyBlocksRead = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.2 |
krNumPhyBlocksWriteThe rate of number of physical blocks written (sync or async). Number of physical blocks written is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumPhyBlocksWrite = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.3 |
krNumLogBlocksReadThe rate of number of logical blocks read. Number of logical blocks read is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumLogBlocksRead = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.4 |
krNumLogBlocksWriteThe rate of number of logical blocks written. Number of logical blocks written is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumLogBlocksWrite = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.5 |
krNumRawIOReadsThe rate of cummulative number of raw I/O reads. Cummulative number of raw I/O reads is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumRawIOReads = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.6 |
krNumRawIOWritesThe rate of cummulative number of raw I/O writes. Cummulative number of raw I/O writes is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumRawIOWrites = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.7 |
krNumBytesReadThe rate of Number of bytes read by rdwr(). Number of bytes read by rdwr() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumBytesRead = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.8 |
krNumBytesWrittenThe rate of number of bytes written by rdwr(). Number of bytes written by rdwr() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumBytesWritten = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.9 |
krrcvintUNUSED.ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.10 |
krxmtintUNUSED.ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.11 |
krmdmintUNUSED.ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.12 |
krNumTermInputCharsThe rate of number of terminal input characters. Number of terminal input characters is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumTermInputChars = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.13 |
krNumCanModeCharsHandledThe rate of number of characters handled in canonical mode. Number of characters handled in canonical mode is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumCanModeCharsHandled = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.14 |
krNumTermOutCharsThe rate of number of terminal output characters. Number of terminal output characters is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumTermOutChars = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.15 |
krNumPhyBlocksAsyncWriteThe rate of number of asynchronous physical block writes. Number of physical block writes asynchronously is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumPhyBlocksAsyncWrite = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.16 |
krphysioUNUSED.ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.17 |
krCPUInterruptsGroupCPU interrupt related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.4 |
krCPUIntrTableTable of CPU Interrupts related information. SEQUENCE OF KrCPUIntrEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.4.1 |
krCPUIntrEntryCPU Interrupts related information for one CPU. KrCPUIntrEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1 |
krIntrCPUInstanceThe CPU number.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.1 |
krNumOfContextSwitchesThe rate of number of context switches. Number of context switches is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfContextSwitches = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.2 |
krNumberOfTrapsThe rate of number of traps. Number of traps is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumberOfTraps = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.3 |
krNumberOfDevInterruptsThe rate of number of device interrupts. Number of device interrupts is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumberOfDevInterrupts = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.4 |
krNumOfIntrThreadsThe rate of number of interrupts as threads. Number of interrupts as threads is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfIntrThreads = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.5 |
krNumOfInterruptsThe rate of number of interrupts locked, prempted, or released. Number of interrupts locked, prempted, or released is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfInterrupts = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.6 |
krCPUSyscallGroupSystem call related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.5 |
krCPUSysTableTable of system call related information for all CPUs. SEQUENCE OF KrCPUSysEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1 |
krCPUSysEntrySystem call related information for one CPU. KrCPUSysEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1 |
krSyscCPUInstanceThe CPU number.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.1 |
krNumOfSysCallsMadeThe rate of number of system calls made. Number of system calls made is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSysCallsMade = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.2 |
krNumOfSysReadsThe rate of number of system reads using read() and readv(). Number of reads using read() and readv() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSysReads = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.3 |
krNumOfSysWritesThe rate of number of system writes using write() and writev(). Number of writes using write() and writev() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSysWrites = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.4 |
krNumOfForksCalledThe rate of number of forks called. Number of forks called is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfForksCalled = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.5 |
krNumOfVForksCalledThe rate of number of vforks called. Number of vforks called is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfVForksCalled = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.6 |
krNumOfExecsCalledThe rate of number of execs called. Number of execs called is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfExecsCalled = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.7 |
krTotNumOfMessagesThe rate of sum of messages sent or received by msgrcv() and msgsnd(). Sum of messages sent or received by msgrcv() and msgsnd() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krTotNumOfMessages = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.8 |
krTotNumOfSemopsThe rate of number of semaphore operations using semop() call. Number of semaphore operations using semop() call is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krTotNumOfSemops = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.9 |
krNumOfPnameLookupThe rate of number of pathname lookup. Number of pathname lookup is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPnameLookup = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.10 |
krNumOfUfsigetcallsThe rate of number of ufs_iget() calls. Number of ufs_iget() calls is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfUfsigetcalls = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.11 |
krNumOfDirBlocksReadThe rate of number of directory blocks read. Number of directory blocks read is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfDirBlocksRead = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.12 |
krNumOfInodesTakenWAPThe rate of number of inodes taken with attached pages. Number of inodes taken with attached pages is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfInodesTakenWAP = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.13 |
krNumOfInodesTakenWNAPThe rate of number of inodes taken with no attached pages. Number of inodes taken with no attached pages is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfInodesTakenWNAP = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.14 |
krNumOfInodeTblOvrFlowThe rate of number of inode table overflows. Number of inode table overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfInodeTblOvrFlow = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.15 |
krNumOfFileTblOvrFlowThe rate of number of file table overflows. Number of file table overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfFileTblOvrFlow = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.16 |
krNumOfProcTblOvrFlowThe rate of number of proc table overflows. Number of proc table overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfProcTblOvrFlow = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.17 |
krCPUMiscGroupMiscellaneous statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.6 |
krCPUMiscTableTable of miscellaneous information about all CPUs. SEQUENCE OF KrCPUMiscEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1 |
krCPUMiscEntryMiscellaneous information for one CPU. KrCPUMiscEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1 |
krMiscCPUInstanceThe CPU number.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.1 |
krNumOfIvolCSwitchesThe rate of number of involuntary context switches. Number of involuntary context switches is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfIvolCSwitches = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.2 |
krNumOfThrCreateCallsThe rate of number of thread_create() calls. Number of thread_create() calls is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfThrCreateCalls = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.3 |
krNumOfCPUMigThe rate of number of CPU migrations by threads. Number of CPU migrations by threads is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfCPUMig = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.4 |
krNumOfxcallsThe rate of number of xcalls to other CPU. Number of xcalls to other CPU is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfxcalls = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.5 |
krNumOfFldMutxEntrsThe rate of number of failed mutex enters. Number of failed mutex enters is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfFldMutxEntrs = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.6 |
krNumOfRWReaderFailsThe rate of number of rw reader failures. Number of rw reader failures is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRWReaderFails = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.7 |
krNumOfRWWriterFailsThe rate of number of rw writer failures. Number of rw writer failures is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRWWriterFails = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.8 |
krNumOfModuleLoadsThe rate of number of times loadable modules loaded. Number of times loadable modules loaded is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfModuleLoads = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.9 |
krNumOfModuleUnloadsThe rate of number of times loadable modules unloaded. Number of times loadable modules unloaded is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfModuleUnloads = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.10 |
krNumOfRWLockTryThe rate of number of tries to acquire rw lock. Number of tries to acquire rw lock is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRWLockTry = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.11 |
krCPURegWindowGroupCPU register window related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.7 |
krCPURegTableTable of CPU register window related information for all CPUs. SEQUENCE OF KrCPURegEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.7.1 |
krCPURegEntryCPU register window related information for one CPU. KrCPURegEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1 |
krRWCPUInstanceThe CPU number.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.1 |
krNumOfRegWinUsrOvrFlowThe rate of number of register window user overflows. Number of register window user overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinUsrOvrFlow = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.2 |
krNumOfRegWinUsrUndrFlowThe rate of number of register window user underflows. Number of register window user underflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinUsrUndrFlow = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.3 |
krNumOfRegWinSysOvrFlowThe rate of number of register window system overflows. Number of register window system overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinSysOvrFlow = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.4 |
krNumOfRegWinSysUndrFlowThe rate of number of register window system underflows. Number of register window system underflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinSysUndrFlow = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.5 |
krNumOfRegWinSysUsrOvrFlowThe rate of number of register window system user overflows. Number of register window system user overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinSysUsrOvrFlow = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.6 |
krCPUPginfoGroupCPU page related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.8 |
krCPUPgTableTable of paging related information for all CPUs. SEQUENCE OF KrCPUPgEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1 |
krCPUPgEntryPaging related information for one CPU. KrCPUPgEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1 |
krPgCPUInstanceThe CPU number.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.1 |
krNumOfPageReclaimsThe rate of number of page reclaims including pageout. Number of page reclaims including pageout is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPageReclaims = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.2 |
krNumOfFreeListPgReclaimsThe rate of number of page reclaims from free list. Number of page reclaims from free list is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfFreeListPgReclaims = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.3 |
krNumOfPageInsThe rate of number of pageins. Number of pageins is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPageIns = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.4 |
krNumOfPgsPagedInThe rate of number of pages paged in. Number of pages paged in is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPgsPagedIn = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.5 |
krNumOfPageOutsThe rate of number of pageouts. Number of pageouts is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPageOuts = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.6 |
krkrNumOfPgsPagedOutThe rate of number of pages paged out. Number of pages paged out is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krkrNumOfPgsPagedOut = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.7 |
krNumOfSwapInsThe rate of number of swapins. Number of swapins is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSwapIns = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.8 |
krNumOfPgsSwappedInThe rate of number of pages swapped in. Number of pages swapped in is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPgsSwappedIn = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.9 |
krNumOfSwapOutsThe rate of number of swapouts. Number of swapouts is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSwapOuts = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.10 |
krNumOfPgsSwappedOutThe rate of number of pages swapped out. Number of pages swapped out is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPgsSwappedOut = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.11 |
krNumOfZeroFilledPagesThe rate of number of pages zero filled on demand. Number of pages zero filled on demand is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfZeroFilledPages = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.12 |
krNumOfAutoFreedPagesThe rate of number of pages freed by daemon or auto. Number of pages freed by daemon or auto is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfAutoFreedPages = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.13 |
krNumberOfScanedPagesThe rate of number of pages examined by pageout daemons. Number of pages examined by pageout daemons is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumberOfScanedPages = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.14 |
krNumOfPDHandsRvlnThe rate of number of revolutions of the page daemon hands. Number of revolutions of the page daemon hands is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPDHandsRvln = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.15 |
krNumOfPagerRunThe rate of number of times pager was scheduled. Number of times pager was scheduled is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPagerRun = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.16 |
krCPUFaultsGroupCPU fault related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.9 |
krCPUFaultTableTable of CPU fault related information for all CPUs. SEQUENCE OF KrCPUFaultEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1 |
krCPUFaultEntryCPU fault related information for one CPU. KrCPUFaultEntry .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1 |
krFaultCPUInstanceThe CPU number.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.1 |
krNumOfMinorHatPageFaultsThe rate of number of minor page faults via hat_fault(). Number of minor page faults via hat_fault() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfMinorHatPageFaults = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.2 |
krNumOfMinorAsPageFaultsThe rate of number of minor page faults via as_fault(). Number of minor page faults via as_fault() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfMinorAsPageFaults = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.3 |
krNumOfMajorPageFaultsThe rate of number of major page faults. Number of major page faults is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfMajorPageFaults = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.4 |
krNumOfCopyOnWriteFaultsThe rate of number of copy-on-write faults. Number of copy-on-write faults is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfCopyOnWriteFaults = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.5 |
krNumOfProtectionFaultsThe rate of number of protection faults. Number of protection faults is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfProtectionFaults = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.6 |
krNumOfSWLockFaultsThe rate of number of faults due to software locking req. Number of faults is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSWLockFaults = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.7 |
krNumOfAsFaultsInKSpaceThe rate of number of as_faults() in kernel addr space. Number of as_faults() in kernel addr space is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfAsFaultsInKSpace = (Y - X)/(T2 - T1).ro Counter64 .1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.8 |
krOverAllCPUStatisticsCPU utilization statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.5.10 |
krOverAllCpuStatsUtilTotal CPU Utilization in Percentage.ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.5.10.1 |
krOverAllCpuStatsIdleIDLE time for CPU in Percentage.ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.5.10.2 |
krMemoryUsageGroupMemory usage related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.6 |
krTotPhyMemAvailTotal physical memory available, in Mbytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.42.2.12.2.2.12.6.1 |
krPhyMemInUseTotal physical memory in use, in Mbytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.42.2.12.2.2.12.6.2 |
krPctOfPhyMemInUseTotal percentage of physical memory in use.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.6.3 |
krFreePhyMemTotal amount of physical memory free, in Mbytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.42.2.12.2.2.12.6.4 |
krPctOfPhyMemFreeTotal percentage of physical memory free.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.6.5 |
krSwapDetailGroupSwap space detail related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.7 |
krTotSwapSpaceAvailTotal amount of swap space available, in Kbytes (total swap - reserved).ro Integer32 UNITS "Kilo Bytes" .1.3.6.1.4.1.42.2.12.2.2.12.7.1 |
krTotReservedSwapSpaceTotal amount of swap space reserved, in Kbytes.ro Integer32 UNITS "Kilo Bytes" .1.3.6.1.4.1.42.2.12.2.2.12.7.2 |
krTotAllocatedSwapSpaceTotal amount of swap space allocated, in Kbytes.ro Integer32 UNITS "Kilo Bytes" .1.3.6.1.4.1.42.2.12.2.2.12.7.3 |
krTotUsedSwapSpaceTotal amount of swap space used, in Kbytes.ro Unsigned32 UNITS "Kilo Bytes" .1.3.6.1.4.1.42.2.12.2.2.12.7.4 |
krTotSwapSpaceTotal amount of swap space.ro Integer32 UNITS "Kilo Bytes" .1.3.6.1.4.1.42.2.12.2.2.12.7.5 |
krTotPctOfSwapSpaceUsedTotal percentage of swap space used.ro DisplayString UNITS "%" .1.3.6.1.4.1.42.2.12.2.2.12.7.6 |
krStreamsDetail OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.12.2.2.12.8 |
krStreamHeadCacheGroupStream head cache related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.8.1 |
krStrHeadCacheNameThe name of the streams head cache maintained by kernel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.1.1 |
krStrHeadCacheCurrUsageCurrent usage (total - avail) of streams head cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.1.2 |
krStrHeadCacheSizeMaximum capacity of streams head cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.1.3 |
krTotSHCacheAllocationNumber of total cache allocatios in streams head cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.1.4 |
krTotSHAllocFailuresNumber of allocation failures in streams head cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.1.5 |
krStrHeadCachePctUsedPercentage of streams head cache used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.1.6 |
krQueueCacheGroupQueue cache related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.8.2 |
krQueueCacheNameThe name of the queue cache maintained by kernel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.2.1 |
krQueueCacheCurrUsageCurrent usage (total - avail) of queue cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.2.2 |
krQueueCacheSizeMaximum capacity of the queue cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.2.3 |
krTotQCacheAllocationNumber of total queue cache allocations.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.2.4 |
krTotQAllocFailuresNumber of allocation failures in queue cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.2.5 |
krQueueCachePctUsedPercentage of queue cache used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.2.6 |
krStreamsMsgGroupStream message related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.8.3 |
krStrMsgCacheNameThe name of the streams messages cache maintained by kernel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.3.1 |
krStrMsgCacheCurrUsageCurrent usage (total - avail) of streams messages cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.3.2 |
krStrMsgCacheSizeMaximum capacity of streams messages cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.3.3 |
krTotSMCacheAllocationNumber of total streams messages cache allocations.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.3.4 |
krTotSMAllocFailuresNumber of allocation failures in streams messages cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.3.5 |
krStrMsgCachePctUsedPercentage of streams messages cache used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.3.6 |
krLinkinfoCacheGroupLink info cache related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.8.4 |
krLinkinfoCacheNameThe name of the link information cache maintained by kernel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.4.1 |
krLinkinfoCacheCurrUsageCurrent usage (total - avail) of link information cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.4.2 |
krLinkinfoCacheSizeMaximum capacity of link information cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.4.3 |
krTotLICacheAllocationNumber of total allocations in link information cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.4.4 |
krTotLIAllocFailuresNumber of allocation failures in link information cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.4.5 |
krLinkinfoCachePctUsedPercentage of link information cache used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.4.6 |
krStreventCacheGroupStream event cache related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.8.5 |
krStrEventCacheNameThe name of the streams event cache maintained by kernel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.5.1 |
krStrEventCacheCurrUsageCurrent usage (total - avail) of streams event cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.5.2 |
krStrEventCacheSizeMaximum capacity of streams event cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.5.3 |
krTotSECacheAllocationNumber of total allocations in streams event cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.5.4 |
krTotSEAllocFailuresNumber of allocation failures in streams event cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.5.5 |
krStrEventCachePctUsedPercentage of streams event cache used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.5.6 |
krSyncqCacheGroupSync cache related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.8.6 |
krSyncCacheNameThe name of the syncq cache maintained by kernel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.6.1 |
krSyncCacheCurrUsageCurrent usage (total - avail) of syncq cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.6.2 |
krSyncCacheSizeMaximum capacity of syncq cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.6.3 |
krTotSyCacheAllocationNumber of total allocations in syncq cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.6.4 |
krTotSyAllocFailuresNumber of allocation failures in syncq cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.6.5 |
krSyncCachePctUsedPercentage of syncq cache used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.6.6 |
krQbandCacheGroupQband cache related statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.8.7 |
krQbandCacheNameThe name of the qband cache maintained by kernel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.7.1 |
krQbandCacheCurrUsageCurrent usage (total - avail) of qband cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.7.2 |
krQbandCacheSizeMaximum capacity of qband cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.7.3 |
krTotQBCacheAllocationNumber of total allocations in qband cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.7.4 |
krTotQBAllocFailuresNumber of allocation failures in qband cache.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.8.7.5 |
krQbandCachePctUsedPercentage of qband cache used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.8.7.6 |
krIOErrorStatsGroupIO error summary statistics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.9 |
krDeviceErrorTableThis table displays device error summary statistics. SEQUENCE OF KrDeviceErrorEntry .1.3.6.1.4.1.42.2.12.2.2.12.9.1 |
krDeviceErrorEntryError information for a particular device. KrDeviceErrorEntry .1.3.6.1.4.1.42.2.12.2.2.12.9.1.1 |
krDevDeviceThe name of the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.1 |
krDevSoftwareErrorsThe number of software errors.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.2 |
krDevHardwareErrorsThe number of hardware errors.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.3 |
krDevTransportErrorsThe number of transport errors.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.4 |
krDevTotalErrorsTotal number of errors for the device.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.5 |
krTapeErrorTableThis table displays tape device error summary statistics. SEQUENCE OF KrTapeErrorEntry .1.3.6.1.4.1.42.2.12.2.2.12.9.2 |
krTapeErrorEntryError information for a particular tape device. KrTapeErrorEntry .1.3.6.1.4.1.42.2.12.2.2.12.9.2.1 |
krTapeDeviceThe name of the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.1 |
krTapeSoftwareErrorsThe number of software errors.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.2 |
krTapeHardwareErrorsThe number of hardware errors.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.3 |
krTapeTransportErrorsThe number of transport errors.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.4 |
krTapeTotalErrorsThe total number of errors for the tape device.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.5 |
krKernelMemAllocGroupDetails kernel memory allocation (KMA) activities Unknown .1.3.6.1.4.1.42.2.12.2.2.12.10 |
krSmallPoolMemThe amount of memory in bytes KMA has for the small pool (The reserve from which small space requests are catered.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.10.1 |
krSmallPoolMemAllocatedThe number of bytes allocated to satisfy requests for small amounts of memory.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.10.2 |
krSmallPoolMemFailedThe number of requests for small amounts of memory that were not satisfied (failed).ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.10.3 |
krLargePoolMemThe amount of memory in bytes KMA has for the large pool (The reserve from which large space requests are catered.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.10.4 |
krLargePoolMemAllocatedThe number of bytes allocated to satisfy requests for large amounts of memory.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.10.5 |
krLargePoolMemFailedThe number of requests for large amounts of memory that were not satisfied (failed).ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.10.6 |
krOversizeMemThe amount of memory in bytes allocated for over-size requests.ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.10.7 |
krOversizeMemFailedThe number of oversize requests which could not be satisfied (failed)ro Integer32 .1.3.6.1.4.1.42.2.12.2.2.12.10.8 |
krZoneListDetails about Zone staticstics. Unknown .1.3.6.1.4.1.42.2.12.2.2.12.14 |
krZoneListTableMIB tree branch SEQUENCE OF KrZoneListEntry .1.3.6.1.4.1.42.2.12.2.2.12.14.1 |
krZoneListEntryMIB tree branch KrZoneListEntry .1.3.6.1.4.1.42.2.12.2.2.12.14.1.1 |
krZoneIdGives Zone Identification Number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.1 |
krZoneNameName of the zone.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.2 |
krStatusZone's Status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.3 |
krPathLogical PATH for the zone.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.4 |
krIpZone's IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.5 |
krAutobootAutoboot Status for the zone.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.6 |