SUN-PLATFORM-MIB
AI MIB Summary
The SUN-PLATFORM-MIB extends the ENTITY-MIB to expose Sun Microsystems hardware inventory, revision levels, and containment hierarchies via the `entPhysicalTable` and specific subclass tables like `sunPlatCircuitPackTable`. This module enables SNMP-based discovery and monitoring of physical components such as circuit packs, blades, and chassis units by mapping ITU-T M.3100 and CIM v2.5 managed object attributes to standard SNMP metrics.
SUN-PLATFORM-MIB.mib Version 1.19 Copyright 2003, by Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. The SUN-PLATFORM-MIB provides extensions to the ENTITY-MIB (RFC2737) where each entity modelled in the system is represented by means of extensions to the entPhysicalTable. Certain of the attributes in the entPhysicalTable are applicable to the model presented by the SUN-PLATFORM-MIB and are explained below: The entries in the entPhysicalTable have the following significance with respect to the SUN-PLATFORM-MIB model: entPhysicalIndex containment, M.3100, fig. 2, index for table extensions. entPhysicalContainedIn containment, M.3100, fig. 2 entPhysicalClass Used to select applicable table extensions, Managed Object Class, M.3100, Table 1 entPhysicalHardwareRev version, M.3100, sec. 5.71 entPhysicalFirmwareRev version, M.3100, sec. 5.71 entPhysicalSoftwareRev version, M.3100, sec. 5.71 entPhysicalMfgName vendorName, M.3100, sec. 5.70 entPhysicalAlias userLabel, M.3100, sec. 5.69 Part of this MIB module is an SNMP version of the Generic Network Information Model (NIM) presented in ITU-T M.3100. This information is further extended by attributes derived from the CIM v2.5 Schema. The containment hierarchy is modelled using the ENTITY-MIB (RFC2737) where each entity modelled in the system is represented by means of extensions to the entPhysicalTable. Where an entity is an instance of a managed object class which is sub-classed from another, the attributes of each class are modelled in a separate table extension. For example for an entity with an entPhysicalClass of module(9), which corresponds to a Circuit Pack, sub-classed from Equipment, an entry will exist in the sunPlatEquipmentTable, with additional attributes in the sunPlatCircuitPackTable. References are made to the following recommendations/revisions: ITU-T M.3100 (07/95) CCITT X.721 (1992 E) CCITT X.731 (1992 E) (01/92) CCITT X.733 (1992 E) CCITT X.734 (1992 E) CCITT X.735 (1992 E) (09/92) CIM Schema: Version 2.5
Main OID:
sunPlatMIB.1.3.6.1.4.1.42.2.70.101
197
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
197 total| Object Name |
|---|
sun OBJECT IDENTIFIER .1.3.6.1.4.1.42 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.42.2 |
sunFire OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70 |
sunPlatMIBSUN-PLATFORM-MIB.mib Version 1.19 Copyright 2003, by Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. The SUN-PLATFORM-MIB provides extensions to the ENTITY-MIB (RFC2737) where each entity modelled in the system is represented by means of extensions to the entPhysicalTable. Certain of the attributes in the entPhysicalTable are applicable to the model presented by the SUN-PLATFORM-MIB and are explained below: The entries in the entPhysicalTable have the following significance with respect to the SUN-PLATFORM-MIB model: entPhysicalIndex containment, M.3100, fig. 2, index for table extensions. entPhysicalContainedIn containment, M.3100, fig. 2 entPhysicalClass Used to select applicable table extensions, Managed Object Class, M.3100, Table 1 entPhysicalHardwareRev version, M.3100, sec. 5.71 entPhysicalFirmwareRev version, M.3100, sec. 5.71 entPhysicalSoftwareRev version, M.3100, sec. 5.71 entPhysicalMfgName vendorName, M.3100, sec. 5.70 entPhysicalAlias userLabel, M.3100, sec. 5.69 Part of this MIB module is an SNMP version of the Generic Network Information Model (NIM) presented in ITU-T M.3100. This information is further extended by attributes derived from the CIM v2.5 Schema. The containment hierarchy is modelled using the ENTITY-MIB (RFC2737) where each entity modelled in the system is represented by means of extensions to the entPhysicalTable. Where an entity is an instance of a managed object class which is sub-classed from another, the attributes of each class are modelled in a separate table extension. For example for an entity with an entPhysicalClass of module(9), which corresponds to a Circuit Pack, sub-classed from Equipment, an entry will exist in the sunPlatEquipmentTable, with additional attributes in the sunPlatCircuitPackTable. References are made to the following recommendations/revisions: ITU-T M.3100 (07/95) CCITT X.721 (1992 E) CCITT X.731 (1992 E) (01/92) CCITT X.733 (1992 E) CCITT X.734 (1992 E) CCITT X.735 (1992 E) (09/92) CIM Schema: Version 2.5 MODULE-IDENTITY .1.3.6.1.4.1.42.2.70.101 |
sunPlatMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.1 |
sunPlatMIBPhysicalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.1.1 |
sunPlatStartTimeThe time at which the agent was last started; in other words, the time at which sysUpTime was zero.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.1.1 |
sunPlatEquipmentTableThe NIM Equipment table. This table augments the entPhysicalTable to provide the attributes defined for equipment under M.3100, sec. 3.2.2. Additional packages may be supported using further table extensions. The sunPlatEquipmentTable is valid for entPhysicalClass values of chassis(3), backplane(4), container(5), powerSupply(6), fan(7), sensor(8), module(9), and other(1). SEQUENCE OF SunPlatEquipmentEntry .1.3.6.1.4.1.42.2.70.101.1.1.2 |
sunPlatEquipmentEntryAn entry in the NIM Equipment table. Each entry of this table represents a piece of equipment within the network element of the type specified by entPhysicalClass. SunPlatEquipmentEntry .1.3.6.1.4.1.42.2.70.101.1.1.2.1 |
sunPlatEquipmentAdministrativeStateAn enumerated value which describes the Administrative State of the managed object as defined in X.731, sec. 8.1.1.3.rw SunPlatAdministrativeState .1.3.6.1.4.1.42.2.70.101.1.1.2.1.1 |
sunPlatEquipmentOperationalStateAn enumerated value which describes the Operational State of the managed object as defined in X.731, sec. 8.1.1.1.ro SunPlatOperationalState .1.3.6.1.4.1.42.2.70.101.1.1.2.1.2 |
sunPlatEquipmentAlarmStatusThe value of this object identifies the Alarm Status of the managed object as defined in M.3100, sec. 5.8.ro SunPlatAlarmStatus .1.3.6.1.4.1.42.2.70.101.1.1.2.1.3 |
sunPlatEquipmentUnknownStatusThis attribute identifies whether or not the state of the entity is known as defined as Unknown Status in X.731, sec. 8.1.2.6.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.1.2.1.4 |
sunPlatEquipmentLocationNameThe specific or general location of the component as defined as Location Name in M.3100, sec. 5.37.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.1.2.1.5 |
sunPlatEquipmentHolderTableThe NIM Equipment-Holder table. This table augments the entPhysicalTable to provide the attributes defined for equipmentHolder under M.3100, sec. 3.2.3. It is valid for an entPhysicalClass of container(5). SEQUENCE OF SunPlatEquipmentHolderEntry .1.3.6.1.4.1.42.2.70.101.1.1.3 |
sunPlatEquipmentHolderEntryAn entry in the NIM Equipment-Holder table. Each entry of this table represents a component within the network element that accepts a replaceable Circuit Pack. SunPlatEquipmentHolderEntry .1.3.6.1.4.1.42.2.70.101.1.1.3.1 |
sunPlatEquipmentHolderTypeThe type of the component as defined in M.3100, sec. 5.26.ro SunPlatEquipmentHolderType .1.3.6.1.4.1.42.2.70.101.1.1.3.1.1 |
sunPlatEquipmentHolderAcceptableTypesThe types of Circuit Pack that can be supported by the slot, separated by newline characters as defined in M.3100, sec. 5.2.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.1.3.1.2 |
sunPlatEquipmentHolderStatusThis attributes identifies whether or not a Circuit Pack is present in the slot as defined in M.3100, sec. 5.32.ro SunPlatEquipmentHolderStatus .1.3.6.1.4.1.42.2.70.101.1.1.3.1.3 |
sunPlatEquipmentHolderPoweredThe current power management state of the equipment holder.rw SunPlatEquipmentHolderPower .1.3.6.1.4.1.42.2.70.101.1.1.3.1.4 |
sunPlatCircuitPackTableThe NIM Circuit-Pack table. This table augments the entPhysicalTable to provide the attributes defined for circuitPack under M.3100, sec. 3.2.1. It is valid for an entPhysicalClass of module(9). SEQUENCE OF SunPlatCircuitPackEntry .1.3.6.1.4.1.42.2.70.101.1.1.4 |
sunPlatCircuitPackEntryAn entry in the NIM Circuit-Pack table. Each entry of this table represents a piece of equipment within the network element that is inserted into and removed from an Equipment-Holder. SunPlatCircuitPackEntry .1.3.6.1.4.1.42.2.70.101.1.1.4.1 |
sunPlatCircuitPackTypeThe type of this circuit pack as defined in M.3100, sec. 5.13.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.1.4.1.1 |
sunPlatCircuitPackAvailabilityStatusThe availability status attribute as defined in X.731, sec. 8.1.2.3.ro SunPlatCircuitPackAvailabilityStatus .1.3.6.1.4.1.42.2.70.101.1.1.4.1.2 |
sunPlatCircuitPackReplaceableThe CIM_PhysicalPackage.Replaceable property as defined by the CIM_Physical Schema.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.1.4.1.3 |
sunPlatCircuitPackHotSwappableThe CIM_PhysicalPackage.HotSwappable property as defined by the CIM_Physical Schema.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.1.4.1.4 |
sunPlatPhysicalTableThe Sun Platform Physical Class Table extension. This table is used to define the physical class of the entity if it is classified as other(1). The sunPlatPhysicalTable is valid for the entPhysicalClass value of other(1). SEQUENCE OF SunPlatPhysicalEntry .1.3.6.1.4.1.42.2.70.101.1.1.5 |
sunPlatPhysicalEntryAn entry in the Sun Platform Physical Class Table extension. Each entry of this table represents a piece of equipment with an entPhysicalClass of other(1). SunPlatPhysicalEntry .1.3.6.1.4.1.42.2.70.101.1.1.5.1 |
sunPlatPhysicalClassAn enumeration of possible physical classes where entPhysicalClass is specified as other(1).ro SunPlatPhysicalClass .1.3.6.1.4.1.42.2.70.101.1.1.5.1.1 |
sunPlatSensorTableThe Sun Platform Sensor Table extension. This table augments the entPhysicalTable to provide the attributes common to all sensors. The sunPlatSensorTable is valid for the entPhysicalClass value of sensor(8). SEQUENCE OF SunPlatSensorEntry .1.3.6.1.4.1.42.2.70.101.1.1.6 |
sunPlatSensorEntryAn entry in the Sun Platform Sensor Table extension. Each entry of this table represents a piece of equipment with an entPhysicalClass of sensor(8). SunPlatSensorEntry .1.3.6.1.4.1.42.2.70.101.1.1.6.1 |
sunPlatSensorClassAn enumeration of possible sensor classes where entPhysicalClass is specified as sensor(8).ro SunPlatSensorClass .1.3.6.1.4.1.42.2.70.101.1.1.6.1.1 |
sunPlatSensorTypeAn enumeration of possible sensor types where entPhysicalClass is specified as sensor(8).ro SunPlatSensorType .1.3.6.1.4.1.42.2.70.101.1.1.6.1.2 |
sunPlatSensorLatencyWhere the sensor is polled this value represents the update interval for this sensor measured in mS. Where the sensor is event driven rather than polled, this value should represent the maximum expected latency in processing that event.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.42.2.70.101.1.1.6.1.3 |
sunPlatBinarySensorTableThe Sun Platform BinarySensor Table extension. This table augments the sunPlatSensorTable to provide the attributes specific to binary sensors. The sunPlatBinarySensorTable is valid for the sunPlatSensorClass value of binary(1). SEQUENCE OF SunPlatBinarySensorEntry .1.3.6.1.4.1.42.2.70.101.1.1.7 |
sunPlatBinarySensorEntryAn entry in the Sun Platform BinarySensor Table extension. Each entry of this table represents a sensor with a sunPlatSensorClass value of binary(1). SunPlatBinarySensorEntry .1.3.6.1.4.1.42.2.70.101.1.1.7.1 |
sunPlatBinarySensorCurrentThe current state of the sensor.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.1.7.1.1 |
sunPlatBinarySensorExpectedThe expected state of the sensor. If there is no expected value then no value is returned for this attribute.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.1.7.1.2 |
sunPlatBinarySensorInterpretTrueThe interpretation to be applied to a sensor reading of true.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.1.7.1.3 |
sunPlatBinarySensorInterpretFalseThe interpretation to be applied to a sensor reading of false.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.1.7.1.4 |
sunPlatNumericSensorTableThe Sun Platform NumericSensor Table extension. This table augments the sunPlatSensorTable to provide the attributes specific to numeric sensors. The sunPlatNumericSensorTable is valid for the sunPlatSensorClass value of numeric(2). SEQUENCE OF SunPlatNumericSensorEntry .1.3.6.1.4.1.42.2.70.101.1.1.8 |
sunPlatNumericSensorEntryAn entry in the Sun Platform NumericSensor Table extension. Each entry of this table represents a sensor with a sunPlatSensorClass value of numeric(2). SunPlatNumericSensorEntry .1.3.6.1.4.1.42.2.70.101.1.1.8.1 |
sunPlatNumericSensorBaseUnitsThe base unit of the values returned by this Sensor, as per CIM_NumericSensor.BaseUnits. Physical values are represented in the units obtained by (sunPlatBaseUnits * 10 raised to the power of sunPlatExponent). For example, if sunPlatBaseUnits is volts(6) and sunPlatExponent is -6, then the units of the values returned are microVolts.ro SunPlatBaseUnits .1.3.6.1.4.1.42.2.70.101.1.1.8.1.1 |
sunPlatNumericSensorExponentThe exponent to be applied to the units returned by this sensor as for CIM_NumericSensor.UnitModifier.ro Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.2 |
sunPlatNumericSensorRateUnitsIf sunPlatRateUnits is set to a value other than none(1), then the units specified by sunPlatBaseUnits are further qualified as rate units. For example, if sunPlatBaseUnits is set to degC(3), and sunPlatRateUnits is set to perSecond(4), then the value represented has the units degC/Second. This is as defined for CIM_NumericSensor.RateUnitsro SunPlatRateUnits .1.3.6.1.4.1.42.2.70.101.1.1.8.1.3 |
sunPlatNumericSensorCurrentThe current state of the sensor as per CIM_NumericSensor.CurrentReading.ro Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.4 |
sunPlatNumericSensorNormalMinThe lowest expected value from this sensor as defined for CIM_NumericSensor.NormalMin. If there is no minimum value then no value is returned for this attribute.ro Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.5 |
sunPlatNumericSensorNormalMaxThe highest expected value from this sensor as defined for CIM_NumericSensor.NormalMax. If there is no maximum value then no value is returned for this attribute.ro Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.6 |
sunPlatNumericSensorAccuracyThe accuracy as defined for CIM_NumericSensor.Accuracy of this sensor expressed as a +/-% value in units of 100ths of a percent.ro SunPlatPercentage .1.3.6.1.4.1.42.2.70.101.1.1.8.1.7 |
sunPlatNumericSensorLowerThresholdNonCriticalThis attribute describes the lower threshold at which a NonCritical condition occurs as defined for CIM_NumericSensor.LowerThresholdNonCritical.rw Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.8 |
sunPlatNumericSensorUpperThresholdNonCriticalThis attribute describes the upper threshold at which a NonCritical condition occurs as defined for CIM_NumericSensor.UpperThresholdNonCritical.rw Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.9 |
sunPlatNumericSensorLowerThresholdCriticalThis attribute describes the lower threshold at which a Critical condition occurs as defined for CIM_NumericSensor.LowerThresholdCritical.rw Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.10 |
sunPlatNumericSensorUpperThresholdCriticalThis attribute describes the upper threshold at which a Critical condition occurs as defined for CIM_NumericSensor.UpperThresholdCritical.rw Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.11 |
sunPlatNumericSensorLowerThresholdFatalThis attribute describes the lower threshold at which a Fatal condition occurs as defined for CIM_NumericSensor.LowerThresholdFatal.rw Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.12 |
sunPlatNumericSensorUpperThresholdFatalThis attribute describes the upper threshold at which a Fatal condition occurs as defined for CIM_NumericSensor.UpperThresholdFatal.rw Integer32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.13 |
sunPlatNumericSensorHysteresisThis attribute describes the hysteresis around the thresholds as defined by CIM_NumericSensor.Hysteresis.ro Unsigned32 .1.3.6.1.4.1.42.2.70.101.1.1.8.1.14 |
sunPlatNumericSensorEnabledThresholdsThis attribute describes the enabled thresholds of this sensor as defined for CIM_NumericSensor.EnabledThresholds.rw SunPlatNumericSensorEnabledThresholds .1.3.6.1.4.1.42.2.70.101.1.1.8.1.15 |
sunPlatNumericSensorRestoreDefaultThresholdsWriting to this attribute resets the sensors thresholds to the default settings.rw SunPlatNumericSensorThresholdResetAction .1.3.6.1.4.1.42.2.70.101.1.1.8.1.16 |
sunPlatDiscreteSensorTableThe Discrete Sensor Table. This table is valid for rows with an entPhysicalClass of sensor(8) and a sunPlatSensorClass of discrete(3). SEQUENCE OF SunPlatDiscreteSensorEntry .1.3.6.1.4.1.42.2.70.101.1.1.9 |
sunPlatDiscreteSensorEntryAn entry in the Discrete Sensor Table. Each entry in this table represents a discrete sensor with entPhysicalClass of sensor(8) and discrete(3). SunPlatDiscreteSensorEntry .1.3.6.1.4.1.42.2.70.101.1.1.9.1 |
sunPlatDiscreteSensorCurrentThe sunPlatDiscreteSensorStatesIndex of a row in the sunPlatDiscreteSensorStatesTable which corresponds to the current reading of the sensor.ro SunPlatIndex .1.3.6.1.4.1.42.2.70.101.1.1.9.1.1 |
sunPlatDiscreteSensorStatesTableThe Discrete Sensor States Table. This table describes the available states for a discrete sensor in the Discrete Sensor Table. This table is valid for an entPhysicalClass value of sensor(8) with a sunPlatSensorClass of discrete(3). SEQUENCE OF SunPlatDiscreteSensorStatesEntry .1.3.6.1.4.1.42.2.70.101.1.1.10 |
sunPlatDiscreteSensorStatesEntryAn entry in the Discrete Sensor States Table. Each entry in this table represents a possible sensor state for the corresponding sensor in the Discrete Sensor Table. The current state of the sensor is indicated by the value of sunPlatDiscreteSensorCurrent for the corresponding sunPlatDiscreteSensorTable entry. SunPlatDiscreteSensorStatesEntry .1.3.6.1.4.1.42.2.70.101.1.1.10.1 |
sunPlatDiscreteSensorStatesIndexA number identifying this sensor state. SunPlatIndex .1.3.6.1.4.1.42.2.70.101.1.1.10.1.1 |
sunPlatDiscreteSensorStatesInterpretationThis attribute describes the state represented by the corresponding row of this table.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.1.10.1.2 |
sunPlatDiscreteSensorStatesAcceptableThis attribute describes whether this value is acceptable as defined for CIM_DiscreteSensor.AcceptableValues.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.1.10.1.3 |
sunPlatFanTableThe Sun Platform Fan Table extension. This table augments the entPhysicalTable to provide the attributes common to all fans and cooling devices. The sunPlatFanTable is valid for the entPhysicalClass value of fan(7). SEQUENCE OF SunPlatFanEntry .1.3.6.1.4.1.42.2.70.101.1.1.11 |
sunPlatFanEntryAn entry in the Sun Platform Fan Table extension. Each entry of this table represents a piece of equipment with an entPhysicalClass of fan(7). SunPlatFanEntry .1.3.6.1.4.1.42.2.70.101.1.1.11.1 |
sunPlatFanClassThis attribute describes the class of the cooling device.ro SunPlatFanClass .1.3.6.1.4.1.42.2.70.101.1.1.11.1.1 |
sunPlatAlarmTableThe Sun Platform Alarm Table extension. This table augments the entPhysicalTable to provide indications of alarm states. The sunPlatAlarmTable is valid for the sunPlatPhysicalClass value of alarm(2). SEQUENCE OF SunPlatAlarmEntry .1.3.6.1.4.1.42.2.70.101.1.1.12 |
sunPlatAlarmEntryAn entry in the Sun Platform Alarm Table extension. Each entry of this table represents a piece of equipment with an sunPlatPhysicalClass of alarm(2). SunPlatAlarmEntry .1.3.6.1.4.1.42.2.70.101.1.1.12.1 |
sunPlatAlarmTypeThis indicates the type of alarm - i.e. the means by which the alarm condition is communicated.ro SunPlatAlarmType .1.3.6.1.4.1.42.2.70.101.1.1.12.1.1 |
sunPlatAlarmStateThis indicates the state of the alarm as defined for CIM_AlarmDevice.AlarmState.rw SunPlatAlarmState .1.3.6.1.4.1.42.2.70.101.1.1.12.1.2 |
sunPlatAlarmUrgencyThis attribute describes the urgency of the alarm as defined for CIM_AlarmDevice.Urgency.ro SunPlatAlarmUrgency .1.3.6.1.4.1.42.2.70.101.1.1.12.1.3 |
sunPlatWatchdogTableThe Sun Platform Watchdog Table extension. This table augments the entPhysicalTable to provide information about a watchdog timer. The sunPlatWatchdogTable is valid for the sunPlatPhysicalClass value of watchdog(3). SEQUENCE OF SunPlatWatchdogEntry .1.3.6.1.4.1.42.2.70.101.1.1.13 |
sunPlatWatchdogEntryAn entry in the Sun Platform Watchdog Table extension. Each entry of this table represents a piece of equipment with an sunPlatPhysicalClass of watchdog(3). SunPlatWatchdogEntry .1.3.6.1.4.1.42.2.70.101.1.1.13.1 |
sunPlatWatchdogTimeoutThis indicates the interval in mS after which the watchdog will timeout if not reset.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.42.2.70.101.1.1.13.1.1 |
sunPlatWatchdogActionThis indicates the action taken by the watchdog if it is not reset within the period specified by sunPlatWatchdogTimeout.ro SunPlatWatchdogAction .1.3.6.1.4.1.42.2.70.101.1.1.13.1.2 |
sunPlatWatchdogLastExpiredThe time at which the watchdog last expired, as defined by CIM_Watchdog.TimeOfLastExpiration.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.1.13.1.3 |
sunPlatWatchdogMonitoredEntityThe entity monitored by the watchdog, as defined by CIM_Watchdog.MonitoredEntityro SunPlatWatchdogMonitoredEntity .1.3.6.1.4.1.42.2.70.101.1.1.13.1.4 |
sunPlatPowerSupplyTableThe Power Supply Table extension. This table is valid for an entPhysicalClass of powerSupply(6). SEQUENCE OF SunPlatPowerSupplyEntry .1.3.6.1.4.1.42.2.70.101.1.1.14 |
sunPlatPowerSupplyEntryAn entry in the Power Supply Table extension. Each entry in this table represents a piece of equipment with an entPhysicalClass of powerSupply(6). SunPlatPowerSupplyEntry .1.3.6.1.4.1.42.2.70.101.1.1.14.1 |
sunPlatPowerSupplyClassThis attribute describes the class of the power supply.ro SunPlatPowerSupplyClass .1.3.6.1.4.1.42.2.70.101.1.1.14.1.1 |
sunPlatBatteryTableThe Battery Table extension. This table is valid for a sunPlatPowerSupplyClass of battery(3). SEQUENCE OF SunPlatBatteryEntry .1.3.6.1.4.1.42.2.70.101.1.1.15 |
sunPlatBatteryEntryAn entry in the Battery Table extension. Each entry in this table represents a piece of equipment with a sunPlatPowerSupplyClass of battery(3). SunPlatBatteryEntry .1.3.6.1.4.1.42.2.70.101.1.1.15.1 |
sunPlatBatteryStatusThe current status of the battery as defined for CIM_Battery.BatteryStatus.ro SunPlatBatteryStatus .1.3.6.1.4.1.42.2.70.101.1.1.15.1.1 |
sunPlatMIBLogicalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.1.2 |
sunPlatLogicalTableAn extension to the entLogicalTable. This table is used to define the logical class of the entity. The sunPlatLogicalTable is valid for all entries in the entLogicalTable. SEQUENCE OF SunPlatLogicalEntry .1.3.6.1.4.1.42.2.70.101.1.2.1 |
sunPlatLogicalEntryAn entry in the sunPlatLogicalTable extension. SunPlatLogicalEntry .1.3.6.1.4.1.42.2.70.101.1.2.1.1 |
sunPlatLogicalClassThis attribute defines the logical class of the entry in the entLogicalTable.ro SunPlatLogicalClass .1.3.6.1.4.1.42.2.70.101.1.2.1.1.1 |
sunPlatLogicalStatusThis attribute describes the current status of the entry in the entLogicalTable as defined by CIM_ManagedSystemElement.Statusro SunPlatLogicalStatus .1.3.6.1.4.1.42.2.70.101.1.2.1.1.2 |
sunPlatUnitaryComputerSystemTableThe Platform Unitary Computer System Table Extension. This table extends the entLogicalTable to provide attributes common to instances of CIM_UnitaryComputerSystem. The sunPlatUnitaryComputerSystemTable is valid for those rows of the entLogicalTable with a SunPlatLogicalClass of computerSystem(2). SEQUENCE OF SunPlatUnitaryComputerSystemEntry .1.3.6.1.4.1.42.2.70.101.1.2.2 |
sunPlatUnitaryComputerSystemEntryAn entry in the Sun Platform Unitary Computer System Table extension. SunPlatUnitaryComputerSystemEntry .1.3.6.1.4.1.42.2.70.101.1.2.2.1 |
sunPlatUnitaryComputerSystemPowerStateThis attribute displays the computer systems current power state as defined by CIM_UnitaryComputerSystem.PowerState. When this attribute is written to the corresponding power state will be requested from the computer system as provided by the CIM_UnitaryComputerSystem.SetPowerState() method.rw SunPlatUnitaryComputerSystemPowerState .1.3.6.1.4.1.42.2.70.101.1.2.2.1.1 |
sunPlatUnitaryComputerSystemApplySettingsSetting this will cause the settings corresponding to the value to be applied to the instance of CIM_UnitaryComputerSystem represented by this row.rw SunPlatUnitaryComputerSystemApplicableSetting .1.3.6.1.4.1.42.2.70.101.1.2.2.1.2 |
sunPlatInitialLoadInfoTableThe Platform Unitary Computer System Initial Load Info Table extension. This table instruments the CIM_UnitaryComputerSystem.InitialLoadInfo[] property. The sunPlatInitialLoadInfoTable is valid for those rows of the entLogicalTable with a sunPlatLogicalClass of computerSystem(2). SEQUENCE OF SunPlatInitialLoadInfoEntry .1.3.6.1.4.1.42.2.70.101.1.2.3 |
sunPlatInitialLoadInfoEntryAn entry in the Sun Platform Unitary Computer System Table extension. SunPlatInitialLoadInfoEntry .1.3.6.1.4.1.42.2.70.101.1.2.3.1 |
sunPlatInitialLoadInfoIndexA number identifying an entry in the sunPlatInitialLoadInfoTable. SunPlatIndex .1.3.6.1.4.1.42.2.70.101.1.2.3.1.1 |
sunPlatInitialLoadInfoDescrThe name for the information presented in the sunPlatInitialLoadInfoValue for this row.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.2.3.1.2 |
sunPlatInitialLoadInfoCurrentValueThe current contents of an entry in the CIM_UnitaryComputerSystem.InitialLoadInfo[] array.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.2.3.1.3 |
sunPlatInitialLoadInfoDesiredValueThe desired contents of an entry in the CIM_UnitaryComputerSystem.InitialLoadInfo[] array. Setting sunPlatUnitaryComputerSystemApplySettings to a value of specifiedSettings(2) will cause these values to be applied.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.2.3.1.4 |
sunPlatMIBLogs OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.1.3 |
sunPlatLogTableThe NIM log table. It is used to maintain a currentProblemList for each managed object as per M.3100, sec. 5.22. The management system creates entries in this table to specify which types of traps, from which managed object, should be logged. Deleting an entry in this table deletes all entries in the corresponding log. There are separate logs for each notification type/managed object. SEQUENCE OF SunPlatLogEntry .1.3.6.1.4.1.42.2.70.101.1.3.1 |
sunPlatLogEntryInformation about a single trap log as defined in X.735 8.1.1. SunPlatLogEntry .1.3.6.1.4.1.42.2.70.101.1.3.1.1 |
sunPlatLogTypeThe type of notifications stored in this log. For currentProblemList alarm entries, the sunPlatLogType is set to the sunPlatLogRecordManagedObjectInstance OID value. OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.1.3.1.1.1 |
sunPlatLogAdministrativeStateThe management system uses this object to stop and start the operations of this object as per X.735, sec. 8.1.1.1.3.rw SunPlatLogAdministrativeState .1.3.6.1.4.1.42.2.70.101.1.3.1.1.2 |
sunPlatLogOperationalStateIndicates whether or not the log is capable of performing its normal operations as per X.735, sec. 8.1.1.1.4.ro SunPlatOperationalState .1.3.6.1.4.1.42.2.70.101.1.3.1.1.3 |
sunPlatLogFullStatusIf the log is full, this attribute is true.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.3.1.1.4 |
sunPlatLogCapacityThresholdIndicates the threshold, expressed in 100ths of a %, at which the log will generate a capacity alarm as per X.735, sec. 8.1.1.3.rw SunPlatPercentage .1.3.6.1.4.1.42.2.70.101.1.3.1.1.5 |
sunPlatLogRowStatusThis object is used to create a new row or to delete an existing row in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.3.1.1.6 |
sunPlatLogRecordTableThe NIM log record table. It is used to maintain a currentProblemList for each managed object as per M.3100, sec. 5.22. SEQUENCE OF SunPlatLogRecordEntry .1.3.6.1.4.1.42.2.70.101.1.3.2 |
sunPlatLogRecordEntryInformation about a single notification associated with a specific managed object. Entries in this table are created automatically but can be deleted by the management system. currentProblemList entries are augmented by the sunPlatLogRecordAdditionalEntry and sunPlatLogRecordAlarmEntry tables. They are automatically deleted when the associated alarm condition is cleared. Entries that represent object creation/deletion alarm log types are augmented by the sunPlatLogRecordAdditionalEntry table. Entries that represent alarm log types are also augmented by the sunPlatLogRecordAlarmEntry table. Entries that represent attribute/state change log types are augmented by the sunPlatLogRecordChangeEntry table. SunPlatLogRecordEntry .1.3.6.1.4.1.42.2.70.101.1.3.2.1 |
sunPlatLogRecordIdA unique number identifying this event as per X.735, sec. 8.1.2.2.1. Unsigned32 .1.3.6.1.4.1.42.2.70.101.1.3.2.1.1 |
sunPlatLogRecordLoggingTimeThe time at which this trap was logged as per X.735, sec. 8.1.2.2.2.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.3.2.1.2 |
sunPlatLogRecordManagedObjectInstanceThe object in the entPhysicalTable or entLogicalTable to which this entry applies as defined in X.721, sec. 10.7.4.13. By convention, this is the name of the first object in the row in the table referenced.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.3.2.1.3 |
sunPlatLogRecordRowStatusThis object is used to delete an existing row in the table. Note that the only value to which a management system can set this object is destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.3.2.1.4 |
sunPlatLogRecordCorrelatedNotificationsA comma-separated list of sunPlatLogRecordId values which identify the other events to which this event is correlated, as defined in X.721, sec 10.7.1.11ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.3.2.1.5 |
sunPlatLogRecordAdditionalTableThe NIM Trap Agent additional information table. This table is used to maintain a currentProblemList for each managed object as per M.3100, sec. 5.22. SEQUENCE OF SunPlatLogRecordAdditionalEntry .1.3.6.1.4.1.42.2.70.101.1.3.3 |
sunPlatLogRecordAdditionalEntryInformation text/OID providing further information relating to alarm and object creation/deletion log records. SunPlatLogRecordAdditionalEntry .1.3.6.1.4.1.42.2.70.101.1.3.3.1 |
sunPlatLogRecordAdditionalInfoAn optional OID of an object which provides additional information relevant to this notification as per X.733, sec. 8.1.2.14. This object is only present if it was included in the notification corresponding to this log entry.ro OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.1.3.3.1.1 |
sunPlatLogRecordAdditionalTextAn optional textual description which provides additional information relevant to this notification as per X.733, sec. 8.1.2.13. This object is only present if it was included in the notification corresponding to this log entry.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.3.3.1.2 |
sunPlatLogRecordAlarmTableThe NIM Trap Agent logged alarm trap table. This table is used to maintain a currentProblemList for each managed object as per M.3100, sec. 5.22. SEQUENCE OF SunPlatLogRecordAlarmEntry .1.3.6.1.4.1.42.2.70.101.1.3.4 |
sunPlatLogRecordAlarmEntryInformation about the alarm-specific attributes of a single trap in the log. SunPlatLogRecordAlarmEntry .1.3.6.1.4.1.42.2.70.101.1.3.4.1 |
sunPlatLogRecordAlarmPerceivedSeverityThe perceived severity of the alarm, as specified by the agent that generated it in accordance with X.733, sec. 8.1.2.3.ro SunPlatAlarmPerceivedSeverity .1.3.6.1.4.1.42.2.70.101.1.3.4.1.1 |
sunPlatLogRecordAlarmProbableCauseAn optional probable cause which provides additional information relevant to this notification as per ITU-T M.3100 sec. 10.2.ro SunPlatProbableCause .1.3.6.1.4.1.42.2.70.101.1.3.4.1.2 |
sunPlatLogRecordAlarmSpecificProblemAn optional textual description which provides additional information concerning the cause of this notification. If more than one specific problem is described in this object, the problem descriptions are separated by CR LF characters. This object is only present if it was included in the alarm trap corresponding to this log entry.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.3.4.1.3 |
sunPlatLogRecordAlarmRepairActionA list of recommended repair actions separated by CR LF sequences.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.1.3.4.1.4 |
sunPlatLogRecordChangeTableThe NIM Trap Agent logged change trap table. This table is used to maintain extra information for log records that represent attribute or state changes as per X.721, sec. 6.2. SEQUENCE OF SunPlatLogRecordChangeEntry .1.3.6.1.4.1.42.2.70.101.1.3.5 |
sunPlatLogRecordChangeEntryInformation about the attribute/state change specific attributes of a single trap in the log. Each of the fields will be present according to the type of the attribute changed. State changes will be indicated using the sunPlatLogRecordChangeNewInteger and sunPlatLogRecordChangeOldInteger objects. SunPlatLogRecordChangeEntry .1.3.6.1.4.1.42.2.70.101.1.3.5.1 |
sunPlatLogRecordChangeChangedOIDThe changed object's OBJECT IDENTIFIER value in an attribute/state change notification.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.1.3.5.1.1 |
sunPlatLogRecordChangeNewIntegerThe new INTEGER value in an attribute/state change notification.ro INTEGER .1.3.6.1.4.1.42.2.70.101.1.3.5.1.2 |
sunPlatLogRecordChangeOldIntegerThe old INTEGER value in an attribute/state change notification.ro INTEGER .1.3.6.1.4.1.42.2.70.101.1.3.5.1.3 |
sunPlatLogRecordChangeNewStringThe new OCTET-STRING value in an attribute change notification.ro OCTET STRING .1.3.6.1.4.1.42.2.70.101.1.3.5.1.4 |
sunPlatLogRecordChangeOldStringThe old OCTET-STRING value in an attribute change notification.ro OCTET STRING .1.3.6.1.4.1.42.2.70.101.1.3.5.1.5 |
sunPlatLogRecordChangeNewOIDThe new OBJECT IDENTIFIER value in an attribute change notification.ro OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.1.3.5.1.6 |
sunPlatLogRecordChangeOldOIDThe old OBJECT IDENTIFIER value in an attribute change notification.ro OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.1.3.5.1.7 |
sunPlatMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.2 |
sunPlatMIBTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.2.0 |
sunPlatObjectCreationIndicates that an object, indicated by sunPlatNotificationObject, has been created as defined in X.721, sec. 13.6. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.1 |
sunPlatObjectDeletionIndicates that an object, indicated by sunPlatNotificationObject, has been deleted as defined in X.721, sec. 13.7. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.2 |
sunPlatCommunicationsAlarmIndicates that a communication alarm has occurred as defined in X.721, sec. 13.2. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.3 |
sunPlatEnvironmentalAlarmIndicates that an environment alarm has occurred as defined in X.721, sec. 13.3. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.4 |
sunPlatEquipmentAlarmIndicates that an equipment alarm has occurred as defined in X.721, sec. 13.4. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.5 |
sunPlatProcessingErrorAlarmIndicates that a processing error alarm has occurred as defined in X.721, sec. 13.10. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.6 |
sunPlatStateChangeIndicates that a state change has occurred on the state attribute identified by sunPlatNotificationChangedOID. As states are enumerations of type INTEGER, the old and new states are passed in sunPlatNotificationOldInteger and sunPlatNotificationNewInteger respectively. This is as defined in X.721, sec. 13.14. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.7 |
sunPlatAttributeChangeIntegerIndicates that attribute identified by sunPlatNotificationChangedOID has changed from the value in sunPlatNotificationOldInteger to the value in sunPlatNotificationNewInteger. This is as defined in X.721, sec. 13.1. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.8 |
sunPlatAttributeChangeStringIndicates that attribute identified by sunPlatNotificationChangedOID has changed from the value in sunPlatNotificationOldString to the value in sunPlatNotificationNewString. This is as defined in X.721, sec. 13.1. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.9 |
sunPlatAttributeChangeOIDIndicates that attribute identified by sunPlatNotificationChangedOID has changed from the value in sunPlatNotificationOldOID to the value in sunPlatNotificationNewOID. This is as defined in X.721, sec. 13.1. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.10 |
sunPlatQualityOfServiceAlarmIndicates that a quality of service alarm has occurred as defined in X.721, sec 13.11. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.11 |
sunPlatIndeterminateAlarmIndicates that an alarm of an indeterminate type has occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.42.2.70.101.2.0.12 |
sunPlatMIBTrapData OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.2.1 |
sunPlatNotificationEventIdA unique ID for this notification.ro Integer32 .1.3.6.1.4.1.42.2.70.101.2.1.1 |
sunPlatNotificationTimeThe time that this notification was generated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.2.1.2 |
sunPlatNotificationObjectThe object in the entPhysicalTable or the entLogicalTable to which this notification applies. By convention, this is the name of the first object in the row in the table referenced.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.2.1.3 |
sunPlatNotificationPerceivedSeverityThe perceived severity of the alarm, as specified by the agent that generated it in accordance with X.733, sec. 8.1.2.3.ro SunPlatAlarmPerceivedSeverity .1.3.6.1.4.1.42.2.70.101.2.1.4 |
sunPlatNotificationProbableCauseAn optional probable cause which provides additional information relevant to this notification as per ITU-T M.3100 sec. 10.2.ro SunPlatProbableCause .1.3.6.1.4.1.42.2.70.101.2.1.5 |
sunPlatNotificationSpecificProblemAn optional textual description which provides additional information concerning the cause of this notification.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.2.1.6 |
sunPlatNotificationRepairActionA list of recommended repair actions separated by CR LF sequences.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.2.1.7 |
sunPlatNotificationAdditionalInfoAn optional OID of an object which provides additional information relevant to this notification.ro OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.2.1.8 |
sunPlatNotificationAdditionalTextAn optional textual description which provides additional information relevant to this notification.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.2.1.9 |
sunPlatNotificationChangedOIDThe changed object's OBJECT IDENTIFIER value in an attribute/state change notification.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.42.2.70.101.2.1.10 |
sunPlatNotificationNewIntegerThe new INTEGER value in an attribute/state change notification.ro INTEGER .1.3.6.1.4.1.42.2.70.101.2.1.11 |
sunPlatNotificationOldIntegerThe old INTEGER value in an attribute/state change notification.ro INTEGER .1.3.6.1.4.1.42.2.70.101.2.1.12 |
sunPlatNotificationNewStringThe new OCTET-STRING value in an attribute change notification.ro OCTET STRING .1.3.6.1.4.1.42.2.70.101.2.1.13 |
sunPlatNotificationOldStringThe old OCTET-STRING value in an attribute change notification.ro OCTET STRING .1.3.6.1.4.1.42.2.70.101.2.1.14 |
sunPlatNotificationNewOIDThe new OBJECT IDENTIFIER value in an attribute change notification.ro OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.2.1.15 |
sunPlatNotificationOldOIDThe old OBJECT IDENTIFIER value in an attribute change notification.ro OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.2.1.16 |
sunPlatNotificationCorrelatedNotificationsA list of sunPlatNotificationEventIDs which are correlated to this notification, separated by commas.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.70.101.2.1.17 |
sunPlatMIBConformances OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.3 |
sunPlatMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.3.1 |
sunPlatComplianceThe compliance statement for SNMP entities which implement this MIB. Unknown .1.3.6.1.4.1.42.2.70.101.3.1.1 |
sunPlatMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.3.2 |
sunPlatMIBObjectGroups OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.3.2.1 |
sunPlatGeneralGroupThe collection of objects which are independent of the platform(s) being monitored. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.1 |
sunPlatEquipmentGroupThe collection of objects which are used to represent attributes of the NIM class of Equipment defined in M.3100, sec. 3.2.2. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.2 |
sunPlatEquipmentHolderGroupThe collection of objects which are used to represent attributes of platform components with an entPhysicalClass of container(5). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.3 |
sunPlatCircuitPackGroupThe collection of objects which are used to represent attributes of platform components with an entPhysicalClass of module(9). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.4 |
sunPlatPhysicalGroupThe collection of objects representing attributes of platform components with an entPhysicalClass value of other(1). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.5 |
sunPlatSensorGroupThe collection of objects representing attributes of platform components with an entPhysicalClass value of sensor(8). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.6 |
sunPlatBinarySensorGroupThe collection of objects representing attributes of sensors with a sunPlatSensorClass of binary(1). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.7 |
sunPlatNumericSensorGroupThe collection of objects representing attributes of sensors with a sunPlatSensorClass of numeric(2). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.8 |
sunPlatDiscreteSensorGroupThe collection of objects representing attributes of sensors with a sunPlatSensorClass of discrete(3). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.9 |
sunPlatFanGroupThe collection of objects representing attributes of platform components with an entPhysicalClass of fan(7). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.10 |
sunPlatAlarmGroupThe collection of objects representing attributes of platform components with a sunPlatPhysicalClass of alarm(2). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.11 |
sunPlatWatchdogGroupThe collection of objects representing attributes of platform components with a sunPlatPhysicalClass of watchdog(3). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.12 |
sunPlatPowerSupplyGroupThe collection of objects representing attributes of platform components with an entPhysicalClass of powerSupply(6). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.13 |
sunPlatBatteryGroupThe collection of objects representing attributes of power supplies with a sunPlatPowerSupplyClass of battery(3). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.14 |
sunPlatLogicalGroupThe collection of objects representing attributes of logical entities present in the entLogicalTable. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.15 |
sunPlatUnitaryComputerSystemGroupThe collection of objects representing attributes of logical entities with a sunPlatLogicalClass of computerSystem(2). Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.16 |
sunPlatLogGroupThe collection of objects representing attributes of logs and/or current problem lists. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.17 |
sunPlatLogRecordGroupThe collection of objects representing a log record or current problem. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.18 |
sunPlatLogRecordAdditionalGroupThe collection of objects providing additional information relating to a log record or current problem. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.19 |
sunPlatLogRecordAlarmGroupThe collection of objects providing information related to an alarm log record or current problem. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.20 |
sunPlatLogRecordChangeGroupThe collection of objects providing information related to an attribute change log record. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.21 |
sunPlatNotificationObjectGroupThe collection of objects used in notifications. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.1.22 |
sunPlatMIBNotifGroups OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.70.101.3.2.2 |
sunPlatNotificationsGroupThe collection of notifications used to indicate the addition or deletion of managed objects from the model, changes of managed object state, attribute changes and the raising of alarms. Unknown .1.3.6.1.4.1.42.2.70.101.3.2.2.1 |