SUN-ILOM-CONTROL-MIB
SUN-ILOM-CONTROL-MIB.mib Version 3.0 Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. This MIB controls all Sun Integrated Lights Out Management devices.
Main OID:
ilomCtrlMIB.1.3.6.1.4.1.42.2.175.102
349
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
349 total| Object Name |
|---|
sun OBJECT IDENTIFIER .1.3.6.1.4.1.42 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.42.2 |
ilom OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175 |
ilomCtrlMIBSUN-ILOM-CONTROL-MIB.mib Version 3.0 Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. This MIB controls all Sun Integrated Lights Out Management devices. MODULE-IDENTITY .1.3.6.1.4.1.42.2.175.102 |
ilomCtrlClients OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1 |
ilomCtrlNtp OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.1 |
ilomCtrlDeviceNTPServerOneIPThe IP address of the first NTP server used by the device. This property is ignored if NTP is not enabled.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.1.1 |
ilomCtrlDeviceNTPServerTwoIPThe IP address of the second NTP server used by the device. This property is ignored if NTP is not enabled.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.1.2 |
ilomCtrlLdap OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.2 |
ilomCtrlLdapEnabledSpecifies whether or not the LDAP client is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.2.1 |
ilomCtrlLdapServerIPThe IP address of the LDAP server used as a name service for user accounts.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.2.2 |
ilomCtrlLdapPortNumberSpecifies the port number for the LDAP client.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.2.3 |
ilomCtrlLdapBindDnThe distinguished name (DN) for the read-only proxy user used to bind to the LDAP server. Example: cn=proxyuser,ou=people,dc=sun,dc=comrw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.2.4 |
ilomCtrlLdapBindPasswordThe password of a read-only proxy user which is used to bind to the LDAP server. This property is essentially write-only. The write-only access level is no longer supported as of SNMPv2. This property must return a null value when read.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.2.5 |
ilomCtrlLdapSearchBaseA search base in the LDAP database below which to find users. Example: ou=people,dc=sun,dc=comrw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.2.6 |
ilomCtrlLdapDefaultRoleSpecifies the role that a user authenticated via LDAP should have. ***NOTE: this object is deprecated and replaced by ilomCtrlLdapDefaultRoles.rwdeprecated ILOMCtrlUserRole .1.3.6.1.4.1.42.2.175.102.1.2.7 |
ilomCtrlLdapDefaultRolesSpecifies the role that a user authenticated via LDAP should have. This property supports the legacy roles of 'Administrator' or 'Operator', or any of the individual role ID combinations of 'a', 'u', 'c', 'r', 'o' and 's' (like 'aucro') where a-admin, u-user, c-console, r-reset, s-service and o-readOnly.rw ILOMCtrlUserRoles .1.3.6.1.4.1.42.2.175.102.1.2.8 |
ilomCtrlRadius OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.3 |
ilomCtrlRadiusEnabledSpecifies whether or not the RADIUS client is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.3.1 |
ilomCtrlRadiusServerIPThe IP address of the RADIUS server used as a name service for user accounts.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.3.2 |
ilomCtrlRadiusPortNumberSpecifies the port number for the RADIUS client.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.3.3 |
ilomCtrlRadiusSecretThe shared secret encryption key that is used to encypt traffic between the RADIUS client and server.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.3.4 |
ilomCtrlRadiusDefaultRoleSpecifies the role that a user authenticated via RADIUS should have. ***NOTE: this object is deprecated and replaced by ILOMCtrlUserRoles.rwdeprecated ILOMCtrlUserRole .1.3.6.1.4.1.42.2.175.102.1.3.5 |
ilomCtrlRadiusDefaultRolesSpecifies the role that a user authenticated via RADIUS should have. This property supports the legacy roles of 'Administrator' or 'Operator', or any of the individual role ID combinations of 'a', 'u', 'c', 'r', 'o' and 's' (like 'aucro') where a-admin, u-user, c-console, r-reset, s-service and o-readOnly.rw ILOMCtrlUserRoles .1.3.6.1.4.1.42.2.175.102.1.3.6 |
ilomCtrlRemoteSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.4 |
ilomCtrlRemoteSyslogDest1The IP address of the first remote syslog destination (log host).rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.4.1 |
ilomCtrlRemoteSyslogDest2The IP address of the second remote syslog destination (log host).rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.4.2 |
ilomCtrlActiveDirectory OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.5 |
ilomCtrlActiveDirectoryEnabledSpecifies whether or not the Active Directory client is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.1 |
ilomCtrlActiveDirectoryIPThe IP address of the Active Directory server used as a name service for user accounts.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.5.2 |
ilomCtrlActiveDirectoryPortNumberSpecifies the port number for the Active Directory client. Specifying 0 as the port means auto-select while specifying 1-65535 configures the actual port.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.3 |
ilomCtrlActiveDirectoryDefaultRoleSpecifies the role that a user authenticated via Active Directory should have. Setting this property to 'Administrator' or 'Operator' will cause the Active Directory client to ignore the schema stored on the AD server. Setting this to 'none' clears the value and indicates that the native Active Directory schema should be used. ***NOTE: this object is deprecated and replaced with ilomCtrlActiveDirectoryDefaultRoles.rwdeprecated ILOMCtrlUserRole .1.3.6.1.4.1.42.2.175.102.1.5.4 |
ilomCtrlActiveDirectoryCertFileURIThis is the URI of a certificate file needed when Strict Cert Mode is enabled. Setting the URI causes the tranfer of the file, making the certificate available immediately for certificate authentication.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.5.5 |
ilomCtrlActiveDirectoryTimeoutSpecifies the number of seconds to wait before timing out if the Active Directory Server is not responding.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.6 |
ilomCtrlActiveDirectoryStrictCertEnabledSpecifies whether or not the Strict Cert Mode is enabled for the Active Directory Client. If enabled, the Active Directory certificate must be uploaded to the SP so that certificate validation can be performed when communicating with the Active Directory server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.7 |
ilomCtrlActiveDirectoryCertFileStatusA string indicating the status of the certificate file. This is useful in determining whether a certificate file is present or not.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.8 |
ilomCtrlActiveDirUserDomainTableThis table is used to configure domain information required for configuring the Active Directory client. SEQUENCE OF ILOMCtrlActiveDirUserDomainEntry .1.3.6.1.4.1.42.2.175.102.1.5.9 |
ilomCtrlActiveDirUserDomainEntryAn entry for an Active Directory user domain. ILOMCtrlActiveDirUserDomainEntry .1.3.6.1.4.1.42.2.175.102.1.5.9.1 |
ilomCtrlActiveDirUserDomainIdAn integer identifier of the Active Directory domain. Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.9.1.1 |
ilomCtrlActiveDirUserDomainThis string should match exactly with an authentication domain on the Active Directory server. This string should contain a substitution string '<USERNAME>' which will be replaced with the user's login name during authentication. Either the principle or distinguished name format is allowed.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.5.9.1.2 |
ilomCtrlActiveDirAdminGroupsTableThis table is used to configure admin group information required for configuring the Active Directory client. SEQUENCE OF ILOMCtrlActiveDirAdminGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.5.10 |
ilomCtrlActiveDirAdminGroupsEntryAn entry for an Active Directory admin group. ILOMCtrlActiveDirAdminGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.5.10.1 |
ilomCtrlActiveDirAdminGroupIdAn integer identifier of the Active Directory admin group entry. Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.10.1.1 |
ilomCtrlActiveDirAdminGroupNameThis string should contain a distinguished name that exactly matches one of the group names on the ActiveDirectory server. Any user belonging to one of these groups in this table will be assigned the ILOM role of Administrator.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.5.10.1.2 |
ilomCtrlActiveDirOperatorGroupsTableThis table is used to configure operator group information required for configuring the Active Directory client. SEQUENCE OF ILOMCtrlActiveDirOperatorGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.5.11 |
ilomCtrlActiveDirOperatorGroupsEntryAn entry for an Active Directory operator group. ILOMCtrlActiveDirOperatorGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.5.11.1 |
ilomCtrlActiveDirOperatorGroupIdAn integer identifier of the Active Directory operator group entry. Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.11.1.1 |
ilomCtrlActiveDirOperatorGroupNameThis string should contain a distinguished name that exactly matches one of the group names on the ActiveDirectory server. Any user belonging to one of these groups in this table will be assigned the ILOM role of Operator.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.5.11.1.2 |
ilomCtrlActiveDirAlternateServerTableThis table is used to view and configure alternate server information for the Active Directory client. SEQUENCE OF ILOMCtrlActiveDirAlternateServerEntry .1.3.6.1.4.1.42.2.175.102.1.5.12 |
ilomCtrlActiveDirAlternateServerEntryAn entry for an Active Directory alternate server. ILOMCtrlActiveDirAlternateServerEntry .1.3.6.1.4.1.42.2.175.102.1.5.12.1 |
ilomCtrlActiveDirAlternateServerIdAn integer identifier of the Active Directory alternate server table. Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.12.1.1 |
ilomCtrlActiveDirAlternateServerIpThe IP address of the Active Directory alternate server used as a name service for user accounts.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.5.12.1.2 |
ilomCtrlActiveDirAlternateServerPortSpecifies the port number for the Active Directory alternate server. Specifying 0 as the port indicates that auto-select will use the well known port number. Specifying 1-65535 is used to explicitly set the port number.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.12.1.3 |
ilomCtrlActiveDirAlternateServerCertStatusA string indicating the status of the certificate file. This is useful in determining whether a certificate file is present or not.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.4 |
ilomCtrlActiveDirAlternateServerCertURIThis is the URI of a certificate file needed when Strict Cert Mode is enabled. Setting the URI causes the tranfer of the file, making the certificate available immediately for certificate authentication. Additionally, either 'remove' or 'restore' are supported for direct certificate manipulation.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.5 |
ilomCtrlActiveDirAlternateServerCertClearA variable that will clear the certificate info associated with the server when it is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.6 |
ilomCtrlActiveDirAlternateServerCertVersionA string indicating the certificate version of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.7 |
ilomCtrlActiveDirAlternateServerCertSerialNoA string showing the serial number of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.8 |
ilomCtrlActiveDirAlternateServerCertIssuerA string showing the issuer of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.9 |
ilomCtrlActiveDirAlternateServerCertSubjectA string showing the subject of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.10 |
ilomCtrlActiveDirAlternateServerCertValidBeginA string showing the valid start date of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.11 |
ilomCtrlActiveDirAlternateServerCertValidEndA string showing the valid end date of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.12.1.12 |
ilomCtrlActiveDirectoryLogDetailControls the amount of messages sent to the event log. The high priority has the least number of messages going to the log, while the lowest priority 'trace' has the most messages logged. When this object is set to 'none', no messages are logged.rw Enumeration .1.3.6.1.4.1.42.2.175.102.1.5.13 |
ilomCtrlActiveDirectoryDefaultRolesSpecifies the role that a user authenticated via Active Directory should have. Setting this property to legacy roles of 'Administrator' or 'Operator', or any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's' will cause the Active Directory client to ignore the schema stored on the AD server. Setting this to 'none' clears the value and indicates that the native Active Directory schema should be used. The role IDs can be joined together 'aucros' where a-admin, u-user, c-console, r-reset, s-service and o-readOnly.rw ILOMCtrlUserRoles .1.3.6.1.4.1.42.2.175.102.1.5.14 |
ilomCtrlActiveDirCustomGroupsTableThis table is used to configure custom group information required for configuring the Active Directory client. SEQUENCE OF ILOMCtrlActiveDirCustomGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.5.15 |
ilomCtrlActiveDirCustomGroupsEntryAn entry for an Active Directory custom group. ILOMCtrlActiveDirCustomGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.5.15.1 |
ilomCtrlActiveDirCustomGroupIdAn integer identifier of the Active Directory custom group entry. Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.15.1.1 |
ilomCtrlActiveDirCustomGroupNameThis string should contain a distinguished name that exactly matches one of the group names on the ActiveDirectory server. Any user belonging to one of these groups in this table will be assigned the ILOM role based on the entry's configuration for roles.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.5.15.1.2 |
ilomCtrlActiveDirCustomGroupRolesSpecifies the role that a user authenticated via Active Directory should have. Setting this property to legacy roles of 'Administrator' or 'Operator', or any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's' will cause the Active Directory client to ignore the schema stored on the AD server. Setting this to 'none' clears the value and indicates that the native Active Directory schema should be used. The role IDs can be joined together 'aucros' where a-admin, u-user, c-console, r-reset, s-service and o-readOnly.rw ILOMCtrlUserRoles .1.3.6.1.4.1.42.2.175.102.1.5.15.1.3 |
ilomCtrlActiveDirectoryCertClearA variable that will clear the certificate info associated with the server when it is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.16 |
ilomCtrlActiveDirectoryCertVersionA string indicating the certificate version of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.17 |
ilomCtrlActiveDirectoryCertSerialNoA string showing the serial number of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.18 |
ilomCtrlActiveDirectoryCertIssuerA string showing the issuer of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.19 |
ilomCtrlActiveDirectoryCertSubjectA string showing the subject of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.20 |
ilomCtrlActiveDirectoryCertValidBeginA string showing the valid start date of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.21 |
ilomCtrlActiveDirectoryCertValidEndA string showing the valid end date of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.22 |
ilomCtrlActiveDirDnsLocatorEnabledSpecifies whether or not the Active Directory DNS Locator functionality is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.23 |
ilomCtrlActiveDirDnsLocatorQueryTableThis table is used to configure DNS Locator search queries used to locate the Active Directory server. SEQUENCE OF ILOMCtrlActiveDirDnsLocatorQueryEntry .1.3.6.1.4.1.42.2.175.102.1.5.24 |
ilomCtrlActiveDirDnsLocatorQueryEntryAn entry for an Active Directory DNS Locator search query. ILOMCtrlActiveDirDnsLocatorQueryEntry .1.3.6.1.4.1.42.2.175.102.1.5.24.1 |
ilomCtrlActiveDirDnsLocatorQueryIdAn integer identifier of the Active Directory DNS Locator Query entry. Integer32 .1.3.6.1.4.1.42.2.175.102.1.5.24.1.1 |
ilomCtrlActiveDirDnsLocatorQueryServiceThis string should contain the service name that will be used to perform the DNS query. The name may contain '<DOMAIN>' as a substitution marker, being replaced by the domain information associated for the user at the time of authentication. Also, the optional '<PORT: >' (ie <PORT:636> for standard LDAP/SSL port 636) can be used to override any learned port information if necessary.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.5.24.1.2 |
ilomCtrlActiveDirExpSearchEnabledSpecifies whether or not the Active Directory expanded search query functionality is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.25 |
ilomCtrlActiveDirStrictCredentialErrorEnabledSpecifies whether or not user credential errors for Active Directory cause the user credentials to be completely errored out, or if the credential validation is attempted using any alternate server. When the parameter is true, the first user credential violation takes effect, but when the mode is false, the same user credentionals can be presented to other servers for authentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.5.26 |
ilomCtrlSMTP OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.6 |
ilomCtrlSMTPEnabledSpecifies whether or not the SMTP client is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.6.1 |
ilomCtrlSMTPServerIPThe IP address of the SMTP server used as a name service for user accounts.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.6.2 |
ilomCtrlSMTPPortNumberSpecifies the port number for the SMTP client.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.6.3 |
ilomCtrlSMTPCustomSenderAn optional format to identify the sender or the 'from' address. Customizing this string allows the user to specify the exact contents (up to 80 chars) of the 'from' field in the email message. Either one of the substitution strings '<IPADDRESS>' or '<HOSTNAME>' can be used as needed. e.g., ilom-sp@sp1302.dev.sun.com, sun-ilom@[<IPADDRESS>], or ilom-alert@<HOSTNAME>.abc.com. By default, this parameter is an empty string. The 'from' field is formatted by either: 1) alert-rule custom-sender, 2) smtp custom-sender, or 3) the standard ILOM originator.rw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.1.6.4 |
ilomCtrlLdapSsl OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.7 |
ilomCtrlLdapSslGlobalObj OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.7.1 |
ilomCtrlLdapSslEnabledSpecifies whether or not the LDAP/SSL client is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.1 |
ilomCtrlLdapSslIPThe IP address of the LDAP/SSL server used as a directory service for user accounts.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.7.1.2 |
ilomCtrlLdapSslPortNumberSpecifies the port number for the LDAP/SSL client. Specifying 0 as the port means auto-select while specifying 1-65535 configures the actual port value.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.7.1.3 |
ilomCtrlLdapSslDefaultRoleSpecifies the role that a user authenticated via LDAP/SSL should have. Setting this property to 'Administrator' or 'Operator' will cause the LDAP/SSL client to ignore the schema stored on the server. The user will be granted the corresponding access level. Setting this to an empty string, or 'none' clears the value and indicates that the native LDAP/SSL schema should be used.rw ILOMCtrlUserRole .1.3.6.1.4.1.42.2.175.102.1.7.1.4 |
ilomCtrlLdapSslCertFileURIThe tftp URI of the LDAP/SSL server's certificate file that should be uploaded in order to perform certificate validation. Setting the URI causes the tranfer of the specified file, making the certificate available immediately for certificate authentication. The server certificate file is needed when Strict Cert Mode is enabled. Additionally, either 'remove' or 'restore' are supported for direct certificate manipulation.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.7.1.5 |
ilomCtrlLdapSslTimeoutSpecifies the number of seconds to wait before timing out if the LDAP/SSL Server is not responding.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.7.1.6 |
ilomCtrlLdapSslStrictCertEnabledSpecifies whether or not the Strict Cert Mode is enabled for the LDAP/SSL Client. If enabled, the LDAP/SSL server's certificate must be uploaded to the SP so that certificate validation can be performed when communicating with the LDAP/SSL server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.7 |
ilomCtrlLdapSslCertFileStatusA string indicating the status of the certificate file. This is useful in determining whether a certificate file is present or not.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.8 |
ilomCtrlLdapSslLogDetailControls the amount of messages sent to the event log. The high priority has the least number of messages going to the log, while the lowest priority 'trace' has the most messages logged. When this object is set to 'none', no messages are logged.rw Enumeration .1.3.6.1.4.1.42.2.175.102.1.7.1.9 |
ilomCtrlLdapSslDefaultRolesSpecifies the role that a user authenticated via LDAP/SSL should have. Setting this property to legacy roles of 'Administrator' or 'Operator', or any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's' will cause the LDAP/SSL client to ignore the schema stored on the LDAP server. Setting this to 'none' clears the value and indicates that the native LDAP/SSL schema should be used. The role IDs can be joined together 'aucros' where a-admin, u-user, c-console, r-reset, s-service and o-readOnly.rw ILOMCtrlUserRoles .1.3.6.1.4.1.42.2.175.102.1.7.1.10 |
ilomCtrlLdapSslCertFileClearA variable that will clear the certificate info associated with the server when it is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.11 |
ilomCtrlLdapSslCertFileVersionA string indicating the certificate version of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.12 |
ilomCtrlLdapSslCertFileSerialNoA string showing the serial number of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.13 |
ilomCtrlLdapSslCertFileIssuerA string showing the issuer of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.14 |
ilomCtrlLdapSslCertFileSubjectA string showing the subject of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.15 |
ilomCtrlLdapSslCertFileValidBeginA string showing the valid start date of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.16 |
ilomCtrlLdapSslCertFileValidEndA string showing the valid end date of the certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.17 |
ilomCtrlLdapSslOptUsrMappingEnabledSpecifies whether or not the optional UserMapping feature is enabled. When this feature is enabled, a typical Manager style ldap bind is done first using the specified credentials for the bindDn and bindPw. Then, the user's login name is used as part of the search/filter criteria defined in the attribute-info to obtain the user's official Distinguished Name.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.1.18 |
ilomCtrlLdapSslOptUsrMappingAttrInfoThe attribute information used to lookup the user login name to the user's Distinguished Name (DN). Typically, it looks very much like a standard LDAP query or filter. The <USERNAME> prefix will be replaced with the login name as part of the query eg: (&(objectclass=person)(uid=<USERNAME>)).rw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.1.7.1.19 |
ilomCtrlLdapSslOptUsrMappingBindDnThe Distinguished Name used for the manager style ldap bind so that user lookups can be done.rw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.1.7.1.20 |
ilomCtrlLdapSslOptUsrMappingBindPwThe password string used for the manager style ldap bind.rw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.1.7.1.21 |
ilomCtrlLdapSslOptUsrMappingSearchBaseThe search based used to attempt the user name look up as defined in the attribute information above.rw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.1.7.1.22 |
ilomCtrlLdapSslUserDomainTableThis table is used to configure domain information required for configuring the LDAP/SSL client. SEQUENCE OF ILOMCtrlLdapSslUserDomainEntry .1.3.6.1.4.1.42.2.175.102.1.7.2 |
ilomCtrlLdapSslUserDomainEntryAn entry for an LDAP/SSL user domain. ILOMCtrlLdapSslUserDomainEntry .1.3.6.1.4.1.42.2.175.102.1.7.2.1 |
ilomCtrlLdapSslUserDomainIdAn integer identifier of the LDAP/SSL domain. Integer32 .1.3.6.1.4.1.42.2.175.102.1.7.2.1.1 |
ilomCtrlLdapSslUserDomainThis string should match exactly with an authentication domain on the LDAP/SSL server. This string should contain a substitution string '<USERNAME>' which will be replaced with the user's login name during authentication. Either the principle or distinguished name format is allowed.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.7.2.1.2 |
ilomCtrlLdapSslAdminGroupsTableThis table is used to configure Admin Group information required for configuring the LDAP/SSL client. SEQUENCE OF ILOMCtrlLdapSslAdminGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.7.3 |
ilomCtrlLdapSslAdminGroupsEntryAn entry for an LDAP/SSL Admin Group. ILOMCtrlLdapSslAdminGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.7.3.1 |
ilomCtrlLdapSslAdminGroupIdAn integer identifier of the LDAP/SSL AdminGroup entry. Integer32 .1.3.6.1.4.1.42.2.175.102.1.7.3.1.1 |
ilomCtrlLdapSslAdminGroupNameThis string should contain a distinguished name that exactly matches one of the group names on the LDAP/SSL server. Any user belonging to one of these groups in this table will be assigned the ILOM role of Administrator.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.7.3.1.2 |
ilomCtrlLdapSslOperatorGroupsTableThis table is used to configure Operator Group information required for configuring the LDAP/SSL client. SEQUENCE OF ILOMCtrlLdapSslOperatorGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.7.4 |
ilomCtrlLdapSslOperatorGroupsEntryAn entry for an LDAP/SSL Operator Group. ILOMCtrlLdapSslOperatorGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.7.4.1 |
ilomCtrlLdapSslOperatorGroupIdAn integer identifier of the LDAP/SSL Operator Group entry. Integer32 .1.3.6.1.4.1.42.2.175.102.1.7.4.1.1 |
ilomCtrlLdapSslOperatorGroupNameThis string should contain a distinguished name that exactly matches one of the group names on the LDAP/SSL server. Any user belonging to one of these groups in this table will be assigned the ILOM role of Operator.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.7.4.1.2 |
ilomCtrlLdapSslAlternateServerTableThis table is used to view and configure alternate server information for the LDAP/SSL client. SEQUENCE OF ILOMCtrlLdapSslAlternateServerEntry .1.3.6.1.4.1.42.2.175.102.1.7.5 |
ilomCtrlLdapSslAlternateServerEntryAn entry for an LDAP/SSL alternate server table. ILOMCtrlLdapSslAlternateServerEntry .1.3.6.1.4.1.42.2.175.102.1.7.5.1 |
ilomCtrlLdapSslAlternateServerIdAn integer identifier of the LDAP/SSL alternate server table. Integer32 .1.3.6.1.4.1.42.2.175.102.1.7.5.1.1 |
ilomCtrlLdapSslAlternateServerIpThe IP address of the LDAP/SSL alternate server used as directory server for user accounts.rw IpAddress .1.3.6.1.4.1.42.2.175.102.1.7.5.1.2 |
ilomCtrlLdapSslAlternateServerPortSpecifies the port number for the LDAP/SSL alternate server. Specifying 0 as the port indicates that auto-select will use the well known port number. Specifying 1-65535 is used to explicitly set the port number.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.7.5.1.3 |
ilomCtrlLdapSslAlternateServerCertStatusA string indicating the status of the certificate file. This is useful in determining whether a certificate file is present or not.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.4 |
ilomCtrlLdapSslAlternateServerCertURIThis is the URI of a certificate file needed when Strict Cert Mode is enabled. Setting the URI causes the tranfer of the file, making the certificate available immediately for certificate authentication. Additionally, either 'remove' or 'restore' are supported for direct certificate manipulation.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.5 |
ilomCtrlLdapSslAlternateServerCertClearA variable that will clear the certificate info associated with the server when it is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.6 |
ilomCtrlLdapSslAlternateServerCertVersionA string indicating the certificate version of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.7 |
ilomCtrlLdapSslAlternateServerCertSerialNoA string showing the serial number of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.8 |
ilomCtrlLdapSslAlternateServerCertIssuerA string showing the issuer of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.9 |
ilomCtrlLdapSslAlternateServerCertSubjectA string showing the subject of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.10 |
ilomCtrlLdapSslAlternateServerCertValidBeginA string showing the valid start date of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.11 |
ilomCtrlLdapSslAlternateServerCertValidEndA string showing the valid end date of the alternate server certificate file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.7.5.1.12 |
ilomCtrlLdapSslCustomGroupsTableThis table is used to configure custom group information required for configuring the LDAP/SSL client. SEQUENCE OF ILOMCtrlLdapSslCustomGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.7.6 |
ilomCtrlLdapSslCustomGroupsEntryAn entry for an LDAP/SSLcustom group. ILOMCtrlLdapSslCustomGroupsEntry .1.3.6.1.4.1.42.2.175.102.1.7.6.1 |
ilomCtrlLdapSslCustomGroupIdAn integer identifier of the LDAP/SSL custom group entry. Integer32 .1.3.6.1.4.1.42.2.175.102.1.7.6.1.1 |
ilomCtrlLdapSslCustomGroupNameThis string should contain a distinguished name that exactly matches one of the group names on the LDAP/SSL server. Any user belonging to one of these groups in this table will be assigned the ILOM role based on the entry's configuration for roles.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.7.6.1.2 |
ilomCtrlLdapSslCustomGroupRolesSpecifies the role that a user authenticated via LDAP/SSL should have. Setting this property to legacy roles of 'Administrator' or 'Operator', or any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's' will cause the LDAP/SSL client to ignore the schema stored on the LDAP/SSL server. Setting this to 'none' clears the value and indicates that the native LDAP/SSL schema should be used. The role IDs can be joined together 'aucros' where a-admin, u-user, c-console, r-reset, s-service and o-readOnly.rw ILOMCtrlUserRoles .1.3.6.1.4.1.42.2.175.102.1.7.6.1.3 |
ilomCtrlDNS OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.1.8 |
ilomCtrlDNSNameServersSpecifies the nameserver for DNS.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.8.1 |
ilomCtrlDNSSearchPathSpecifies the searchpath for DNS.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.1.8.2 |
ilomCtrlDNSdhcpAutoDnsSpecifies whether or not DHCP autodns is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.1.8.3 |
ilomCtrlDNSTimeoutSpecifies the number of seconds to wait before timing out if the server does not respond.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.8.4 |
ilomCtrlDNSRetriesSpecifies the number of times a request is attempted again, after a timeout.rw Integer32 .1.3.6.1.4.1.42.2.175.102.1.8.5 |
ilomCtrlServices OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.2 |
ilomCtrlHttp OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.2.1 |
ilomCtrlHttpEnabledSpecifies whether or not the embedded web server should be running and listening on the HTTP port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.2.1.1 |
ilomCtrlHttpPortNumberSpecifies the port number that the embedded web server should listen to for HTTP requests.rw Integer32 .1.3.6.1.4.1.42.2.175.102.2.1.2 |
ilomCtrlHttpSecureRedirectSpecifies whether or not the embedded web server should redirect HTTP connections to HTTPS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.2.1.3 |
ilomCtrlHttps OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.2.2 |
ilomCtrlHttpsEnabledSpecifies whether or not the embedded web server should be running and listening on the HTTPS port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.2.2.1 |
ilomCtrlHttpsPortNumberSpecifies the port number that the embedded web server should listen to for HTTPS requests.rw Integer32 .1.3.6.1.4.1.42.2.175.102.2.2.2 |
ilomCtrlSsh OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.2.3 |
ilomCtrlSshRsaKeyFingerprintThe fingerprint of the RSA key used for the SSH protocol.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.2.3.1 |
ilomCtrlSshRsaKeyLengthThe length of the RSA key used for the SSH protocol.ro Integer32 .1.3.6.1.4.1.42.2.175.102.2.3.2 |
ilomCtrlSshDsaKeyFingerprintThe fingerprint of the DSA key used for the SSH protocol.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.2.3.3 |
ilomCtrlSshDsaKeyLengthThe length of the DSA key used for the SSH protocol.ro Integer32 .1.3.6.1.4.1.42.2.175.102.2.3.4 |
ilomCtrlSshGenerateNewKeyActionThis property is used to initiate a new public key generation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.2.3.5 |
ilomCtrlSshGenerateNewKeyTypeSSH new key type. The possible type are rsa(2), dsa(3).rw ILOMCtrlSshKeyGenType .1.3.6.1.4.1.42.2.175.102.2.3.6 |
ilomCtrlSshRestartSshdActionThis property is used to initiate sshd restart.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.2.3.7 |
ilomCtrlSshEnabledSpeicfies whether or not the SSHD is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.2.3.8 |
ilomCtrlSingleSignon OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.2.4 |
ilomCtrlSingleSignonEnabledSpecified whether single sign-on authentication should be enabled on the device. Single sign-on allows tokens to be passed around so that it is not necessary to re-enter passwords between different applications. This would allow single sign-on between the SC web interface and the SP web interface, between the SC command-line interface and the SP command-line interface, and between the SC and SP interfaces and the Java Remote Console application.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.2.4.1 |
ilomCtrlNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.3 |
ilomCtrlNetworkTableA table listing all targets whose networks can be controlled. SEQUENCE OF ILOMCtrlNetworkEntry .1.3.6.1.4.1.42.2.175.102.3.1 |
ilomCtrlNetworkEntryAn entry for a target which can be reset. ILOMCtrlNetworkEntry .1.3.6.1.4.1.42.2.175.102.3.1.1 |
ilomCtrlNetworkTargetThis is the nomenclature name for a target which has a configurable network. On some systems, there are multiple targets which have networks. On a traditional, non-blade system, this table will contain only one row for the network configuration of the service processor, which has a nomenclature name of '/SP'. On blade systems, this table will contain multiple rows. There will be a row for '/SC' which allows for configuration of the system controller's network settings. In addition, there will be rows for each blade's service processor. For example, a blade's service processor nomenclature takes the form of '/CH/BL0/SP', '/CH/BL1/SP' and so on. This will allow for the configuration of the service processors from the system controller. In the case of redundant system controllers, the floating master IP addressed can be configured using a name of /MASTERSC. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.3.1.1.1 |
ilomCtrlNetworkMacAddressSpecifies the MAC address of the service processor or system controller.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.3.1.1.2 |
ilomCtrlNetworkIpDiscoverySpecifies whether the current target is configured to have static IP settings or whether these settings are retrieved dynamically from DHCP.ro ILOMCtrlNetworkIpDiscovery .1.3.6.1.4.1.42.2.175.102.3.1.1.3 |
ilomCtrlNetworkIpAddressIndicates the current IP address for the given target.ro IpAddress .1.3.6.1.4.1.42.2.175.102.3.1.1.4 |
ilomCtrlNetworkIpGatewayIndicates the current IP gateway for the given target.ro IpAddress .1.3.6.1.4.1.42.2.175.102.3.1.1.5 |
ilomCtrlNetworkIpNetmaskIndicates the current IP netmask for the given target.ro IpAddress .1.3.6.1.4.1.42.2.175.102.3.1.1.6 |
ilomCtrlNetworkPendingIpDiscoveryThis property is used to set the pending value for the mode of IP discovery for the given target. The possible values are static(1) or dynamic(2). Static values can be specified by setting the other pending properties in this table: ilomCtrlNetworkPendingIpAddress, ilomCtrlNetworkPendingIpGateway, and ilomCtrlNetworkPendingIpNetmask. If dynamic is specified, the other pending properties should not be set. This property does not take effect until the ilomCtrlNetworkCommitPending property is set to true for the given row.rw ILOMCtrlNetworkIpDiscovery .1.3.6.1.4.1.42.2.175.102.3.1.1.7 |
ilomCtrlNetworkPendingIpAddressThis property is used to set the pending IP address for the given target. This property does not take effect until the ilomCtrlNetworkCommitPending property is set to true for the given row.rw IpAddress .1.3.6.1.4.1.42.2.175.102.3.1.1.8 |
ilomCtrlNetworkPendingIpGatewayThis property is used to set the pending IP gateway for the given target. This property does not take effect until the ilomCtrlNetworkCommitPending property is set to true for the given row.rw IpAddress .1.3.6.1.4.1.42.2.175.102.3.1.1.9 |
ilomCtrlNetworkPendingIpNetmaskThis property is used to set the pending IP netmask for the given target. This property does not take effect until the ilomCtrlNetworkCommitPending property is set to true for the given row.rw IpAddress .1.3.6.1.4.1.42.2.175.102.3.1.1.10 |
ilomCtrlNetworkCommitPendingThis property is used to commit pending properties for the given row. Settings this property to true(1) will cause the network to be reconfigured according to the values specified in the other pending properties.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.3.1.1.11 |
ilomCtrlNetworkOutOfBandMacAddressSpecifies the MAC address of the out of band management interface (where applicable)ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.3.1.1.12 |
ilomCtrlNetworkSidebandMacAddressSpecifies the MAC address of the sideband management interface (where applicable)ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.3.1.1.13 |
ilomCtrlNetworkPendingManagementPortThis property is used to set the pending management port for the giventarget. This property does not take effect until the ilomCtrlNetworkCommitPending property is set to true for the given row.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.3.1.1.14 |
ilomCtrlNetworkManagementPortIndicates the current managment port for the given targetrw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.3.1.1.15 |
ilomCtrlNetworkDHCPServerAddrThe address of the DHCP server for this row.ro IpAddress .1.3.6.1.4.1.42.2.175.102.3.1.1.16 |
ilomCtrlNetworkStateSpecifies whether or not the row is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.3.1.1.17 |
ilomCtrlUsers OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.4 |
ilomCtrlLocalUserAuthTableThis table provides a listing of the current local users on a system along with their password state. ***NOTE: this table is deprecated and replaced with ilomCtrlLocalUserTable.deprecated SEQUENCE OF ILOMCtrlLocalUserAuthEntry .1.3.6.1.4.1.42.2.175.102.4.1 |
ilomCtrlLocalUserAuthEntryAn entry containing objects for a local user in the database. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserEntry.deprecated ILOMCtrlLocalUserAuthEntry .1.3.6.1.4.1.42.2.175.102.4.1.1 |
ilomCtrlLocalUserAuthUsernameThe username of a local user on the device. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserUsername.deprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.4.1.1.1 |
ilomCtrlLocalUserAuthPasswordThe password of a local user on the device. This property is essentially write-only. The write-only access level is no longer supported as of SNMPv2. This property must return a null value when read. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserPassword.rwdeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.4.1.1.2 |
ilomCtrlLocalUserAuthRoleSpecifies whether a user's password is assigned or unassigned. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserRoles.rwdeprecated ILOMCtrlUserRole .1.3.6.1.4.1.42.2.175.102.4.1.1.3 |
ilomCtrlLocalUserAuthRowStatusThis object is used to create a new row or to delete an existing row in the table. This property can be set to either createAndWait(5) or destroy(6), to create and remove a user respectively. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserRowStatus.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.4.1.1.4 |
ilomCtrlLocalUserAuthCLIModeAllows the CLI mode to be configured on a per-user basis. The CLI mode determines which shell the user will interact with. If the 'default' mode is select, the user will see the DMTF CLP after logging in via ssh or the console. If the 'alom' mode is selected, the user will see the ALOM CMT shell after logging in via ssh or the console. ***NOTE: this object is deprecated and replaced with ilomCtrlLocalUserCLIMode.rwdeprecated ILOMCtrlLocalUserAuthCLIMode .1.3.6.1.4.1.42.2.175.102.4.1.1.5 |
ilomCtrlLocalUserTableThis table provides a listing of the current local users on a system along with their password state. SEQUENCE OF ILOMCtrlLocalUserEntry .1.3.6.1.4.1.42.2.175.102.4.2 |
ilomCtrlLocalUserEntryAn entry containing objects for a local user in the database. ILOMCtrlLocalUserEntry .1.3.6.1.4.1.42.2.175.102.4.2.1 |
ilomCtrlLocalUserUsernameThe username of a local user on the device. ILOMCtrlLocalUserUsername .1.3.6.1.4.1.42.2.175.102.4.2.1.1 |
ilomCtrlLocalUserPasswordThe password of a local user on the device. This property is essentially write-only. The write-only access level is no longer supported as of SNMPv2. This property must return a null value when read.rw ILOMCtrlLocalUserPassword .1.3.6.1.4.1.42.2.175.102.4.2.1.2 |
ilomCtrlLocalUserRolesSpecifies the role that is associated with a user. The roles can be assigned for the legacy roles of 'Administrator' or 'Operator', or any of the individual role IDs of 'a', 'u', 'c', 'r', 'o' and 's'. The role IDs can be joined together 'aucros' where a-admin, u-user, c-console, r-reset, s-service and o-readOnly.rw ILOMCtrlUserRoles .1.3.6.1.4.1.42.2.175.102.4.2.1.3 |
ilomCtrlLocalUserRowStatusThis object is used to create a new row or to delete an existing row in the table. This property can be set to either createAndWait(5) or destroy(6), to create and remove a user respectively.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.4.2.1.4 |
ilomCtrlLocalUserCLIModeAllows the CLI mode to be configured on a per-user basis. The CLI mode determines which shell the user will interact with. If the 'default' mode is select, the user will see the DMTF CLP after logging in via ssh or the console. If the 'alom' mode is selected, the user will see the ALOM CMT shell after logging in via ssh or the console.rw ILOMCtrlLocalUserAuthCLIMode .1.3.6.1.4.1.42.2.175.102.4.2.1.5 |
ilomCtrlSessions OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.5 |
ilomCtrlSessionsTableA table listing the current user sessions. SEQUENCE OF ILOMCtrlSessionsEntry .1.3.6.1.4.1.42.2.175.102.5.1 |
ilomCtrlSessionsEntryAn entry for a current session. ILOMCtrlSessionsEntry .1.3.6.1.4.1.42.2.175.102.5.1.1 |
ilomCtrlSessionsIdThe instance number of a given logged-in user. This property is necessary since the same user can be logged in multiple times. Integer32 .1.3.6.1.4.1.42.2.175.102.5.1.1.1 |
ilomCtrlSessionsUsernameThe username of the user associated with the session.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.5.1.1.2 |
ilomCtrlSessionsConnectionTypeThe type of connection that the given user is using to access the device.ro ILOMCtrlSessionsConnectionType .1.3.6.1.4.1.42.2.175.102.5.1.1.3 |
ilomCtrlSessionsLoginTimeThe date and time that the logged into the device.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.5.1.1.4 |
ilomCtrlFirmwareMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.6 |
ilomCtrlFirmwareMgmtVersionThe version of the current firmware image.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.6.1 |
ilomCtrlFirmwareBuildNumberThe build number of the current firmware image.ro Integer32 .1.3.6.1.4.1.42.2.175.102.6.2 |
ilomCtrlFirmwareBuildDateThe build date and time of the current firmware image.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.6.3 |
ilomCtrlFirmwareTFTPServerIPThe IP address of the TFTP server which will be used to download the the firmware image.rw IpAddress .1.3.6.1.4.1.42.2.175.102.6.4 |
ilomCtrlFirmwareTFTPFileNameThe relative path of the new firmware image file on the TFTP server.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.6.5 |
ilomCtrlFirmwarePreserveConfigThis property determines whether the previous configuration of the device should be preserved after a firmware update. The configuration data includes all users information, configuration of clients and services, and any logs. The default value of this property is true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.6.6 |
ilomCtrlFirmwareMgmtStatusThis property indicates the status of a firmware update. If a TFTP error occurred while attempting to upload a new firmware image, the value of this property will be tftpError(1). If the image was uploaded correctly but it did not pass verification, the value of this property will be imageVerificationFailed(2). Otherwise, the status will indicate that the update is inProgress(3) or is a success(4). A firmware update could take as long as 20 minutes. During this time, no other operations should be performed on the device. Upon success, the device will be reset.ro ILOMCtrlFirmwareUpdateStatus .1.3.6.1.4.1.42.2.175.102.6.7 |
ilomCtrlFirmwareMgmtActionThis property is used to initiate a firmware update using the values of the other firmware management properties as parameters. It can also clear the values of those parameters. To initiate a firmware update, set the value of this property to initate(2). To clear the values of the writeable firmware management properties, set this propery to clearProperties(1). Before initiating a firmware update, the ilomCtrlFirmwareTFTPServerIP, ilomCtrlFirmwareTFTPFileName, and ilomCtrlFirmwarePreserveConfig properties must be set. After intiating a firmware update, the ilomCtrlFirmwareMgmtStatus property can be used to determine if the operation was successful. This is effectively a write-only property.rw ILOMCtrlFirmwareUpdateAction .1.3.6.1.4.1.42.2.175.102.6.8 |
ilomCtrlFirmwareMgmtFilesystemVersionThe version of the current file system.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.6.9 |
ilomCtrlFirmwareDelayBIOSOn servers that support a BIOS, this property is used to postpone the BIOS upgrade until the next server poweroff. Setting this property to 'false' will cause the server to be forced off if a BIOS upgrade is necessary. The default value of this property is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.6.10 |
ilomCtrlLogs OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.7 |
ilomCtrlEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.7.1 |
ilomCtrlEventLogTableThis table provides a list of the current entries in the event log. SEQUENCE OF ILOMCtrlEventLogEntry .1.3.6.1.4.1.42.2.175.102.7.1.1 |
ilomCtrlEventLogEntryAn entry in the event logs table. ILOMCtrlEventLogEntry .1.3.6.1.4.1.42.2.175.102.7.1.1.1 |
ilomCtrlEventLogRecordIDThe record number for a given the event log entry. Unsigned32 .1.3.6.1.4.1.42.2.175.102.7.1.1.1.1 |
ilomCtrlEventLogTypeAn integer representing the type of event.ro ILOMCtrlEventLogType .1.3.6.1.4.1.42.2.175.102.7.1.1.1.2 |
ilomCtrlEventLogTimestampThe date and time that the event log entry was recorded.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.7.1.1.1.3 |
ilomCtrlEventLogClassAn integer representing the class of event.ro ILOMCtrlEventLogClass .1.3.6.1.4.1.42.2.175.102.7.1.1.1.4 |
ilomCtrlEventLogSeverityThe event severity corresponding to the given log entry.ro ILOMCtrlEventSeverity .1.3.6.1.4.1.42.2.175.102.7.1.1.1.5 |
ilomCtrlEventLogDescriptionA textual description of the event.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.7.1.1.1.6 |
ilomCtrlEventLogClearWhen set to 'true' clears the event log.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.7.1.2 |
ilomCtrlAlerts OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.8 |
ilomCtrlAlertsTableThis table is used to view and add alert rules. SEQUENCE OF ILOMCtrlAlertsEntry .1.3.6.1.4.1.42.2.175.102.8.1 |
ilomCtrlAlertsEntryAn entry containing objects for an alert rule. ILOMCtrlAlertsEntry .1.3.6.1.4.1.42.2.175.102.8.1.1 |
ilomCtrlAlertIDAn integer ID associated with a given alert rule. Integer32 .1.3.6.1.4.1.42.2.175.102.8.1.1.1 |
ilomCtrlAlertSeverityThis property specifies the mininum event severity which should trigger an alert, for a given class.rw ILOMCtrlEventSeverity .1.3.6.1.4.1.42.2.175.102.8.1.1.2 |
ilomCtrlAlertTypeThis property specifies the type of notification for a given alert. If the type is snmptrap(2) or ipmipet(3), the ilomCtrlAlertDestinationIP must be specified. If the type is email(1), the ilomCtrlAlertDestinationEmail must be specified.rw ILOMCtrlAlertType .1.3.6.1.4.1.42.2.175.102.8.1.1.3 |
ilomCtrlAlertDestinationIPThis property species the IP address to send alert notifications when the alert type is snmptrap(2), ipmipet(3), or remotesyslog(4).rw IpAddress .1.3.6.1.4.1.42.2.175.102.8.1.1.4 |
ilomCtrlAlertDestinationEmailThis property species the email address to send alert notifications when the alert type is email(1).rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.8.1.1.5 |
ilomCtrlAlertSNMPVersionThe version of SNMP trap that should be used for the given alert rule.rw ILOMCtrlAlertSNMPVersion .1.3.6.1.4.1.42.2.175.102.8.1.1.6 |
ilomCtrlAlertSNMPCommunityOrUsernameThis string specifies the community string to be used when the ilomCtrlAlertSNMPVersion property is set to 'v1' or 'v2c'. Alternatively, this string specifies the SNMP username to use when the ilomCtrlAlertSNMPVersion is set to 'v3'.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.8.1.1.7 |
ilomCtrlAlertDestinationPortDestination port for SNMP traps, 0 maps to the defaultrw Integer32 .1.3.6.1.4.1.42.2.175.102.8.1.1.8 |
ilomCtrlAlertEmailEventClassFilterA class name or 'all' to filter emailed alerts on.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.8.1.1.9 |
ilomCtrlAlertEmailEventTypeFilterA type name or 'all' to filter emailed alerts on.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.8.1.1.10 |
ilomCtrlAlertEmailCustomSenderAn optional format to identify the sender or the 'from' address. Customizing this string allows the user to specify the exact contents (up to 80 chars) of the 'from' field in the email message. Either one of the substitution strings '<IPADDRESS>' or '<HOSTNAME>' can be used as needed. By default, this parameter is an empty string, which results in the standard ILOM formatted originator for the alerts. e.g., ilom-sp@sp1302.dev.sun.com, sun-ilom@[<IPADDRESS>], or ilom-alert@<HOSTNAME>.abc.comrw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.8.1.1.11 |
ilomCtrlAlertEmailMessagePrefixAn optional string that can be added to the beginning of the message body. The prefix size can be up to 80 characters.rw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.8.1.1.12 |
ilomCtrlClock OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.9 |
ilomCtrlDateAndTimeThe date and time of the device.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.9.1 |
ilomCtrlNTPEnabledSpecifies whether or not Network Time Protocol is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.9.2 |
ilomCtrlTimezoneThe configured timezone string.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.9.3 |
ilomCtrlSerial OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.10 |
ilomCtrlSerialInternalPortPresentIndicates whether the given device has an internal serial port that is configurable. The internal serial port is the connection between the host server and the service processor that allows the SP to access the host serial console.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.10.1 |
ilomCtrlSerialInternalPortBaudRateSpecifies the current baud rate setting for the internal serial port. This is only readable/settable if ilomCtrlSerialInternalPortPresent is true.rw ILOMCtrlBaudRate .1.3.6.1.4.1.42.2.175.102.10.2 |
ilomCtrlSerialExternalPortPresentIndicates whether the given device has an external serial port that is configurable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.10.3 |
ilomCtrlSerialExternalPortBaudRateSpecifies the current baud rate setting for the external serial port. This is only readable/settable if ilomCtrlSerialExternalPortPresent is true.rw ILOMCtrlBaudRate .1.3.6.1.4.1.42.2.175.102.10.4 |
ilomCtrlSerialExternalPortFlowControlSpecifies the current flowcontrol setting for the external serial port. This is only readable/settable if ilomCtrlSerialExternalPortPresent is true.ro ILOMCtrlFlowControl .1.3.6.1.4.1.42.2.175.102.10.5 |
ilomCtrlPowerReset OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.11 |
ilomCtrlPowerControl OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.11.1 |
ilomCtrlPowerTableA table listing all targets whose power can be controlled. SEQUENCE OF ILOMCtrlPowerEntry .1.3.6.1.4.1.42.2.175.102.11.1.1 |
ilomCtrlPowerEntryAn entry for a power-controllable target. ILOMCtrlPowerEntry .1.3.6.1.4.1.42.2.175.102.11.1.1.1 |
ilomCtrlPowerTargetThis is the nomenclature name for a target which supports power control. On some systems, there are multiple targets which support power control. On a traditional, non-blade system, this table will contain only one row. The nomenclature name for a traditional server is '/SYS'. On blade systems, this table will contain multiple rows. There will be a row for '/CH' which allows for power control of the entire chassis. In addition, there will be rows for each blade. Blade nomenclature takes the form of '/CH/BL0/SYS', '/CH/BL1/SYS', and so on. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.11.1.1.1.1 |
ilomCtrlPowerActionThe action to apply to the given power control target. The possible actions are powerOn(1), powerOff(2), powerCycle(3), and powerSoft(4). When this value is read, it returns a null value.rw ILOMCtrlPowerAction .1.3.6.1.4.1.42.2.175.102.11.1.1.1.2 |
ilomCtrlResetControl OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.11.2 |
ilomCtrlResetTableA table listing all targets which can be reset. SEQUENCE OF ILOMCtrlResetEntry .1.3.6.1.4.1.42.2.175.102.11.2.1 |
ilomCtrlResetEntryAn entry for a target which can be reset. ILOMCtrlResetEntry .1.3.6.1.4.1.42.2.175.102.11.2.1.1 |
ilomCtrlResetTargetThis is the nomenclature name for a target which supports reset capabilities. On some systems, there are multiple targets which support reset. On most systems, only system controllers and service processors support reset. On a traditional, non-blade system, this table will contain only one row, representing its service processor. The nomenclature name for a traditional server's service processor is '/SP'. On blade systems, this table will contain multiple rows. There will be a row for '/SC' which allows for reset of the system controller. In addition, there will be rows for each blade's service processor. For example, a blade's service processor nomenclature takes the form of '/CH/BL0/SP', '/CH/BL1/SP' and so on. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.11.2.1.1.1 |
ilomCtrlResetActionThe action to apply to the given reset control target. The possible actions are reset(1), which is a normal reset, resetNonMaskableInterrupt(2) which is a forced reset, and force(3) which is a forced reset for platforms that do not support NMI. When this value is read, it returns a null value.rw ILOMCtrlResetAction .1.3.6.1.4.1.42.2.175.102.11.2.1.1.2 |
ilomCtrlRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.12 |
ilomCtrlRedundancyStatusThis property indicates the status of the device in a redundant configuration. It may be active(2) or standby(3) when configured as a redundant pair or standAlone(4) if it does not have a peer. In addition, it may be in a state called initializing(1) if it is in a transitional state.ro ILOMCtrlRedundancyStatus .1.3.6.1.4.1.42.2.175.102.12.1 |
ilomCtrlRedundancyActionThis action is used to promote or demote this device from active or standy status.rw ILOMCtrlRedundancyAction .1.3.6.1.4.1.42.2.175.102.12.2 |
ilomCtrlRedundancyFRUNameFRU Name of the CMM on which this agent is running.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.12.3 |
ilomCtrlPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.13 |
ilomCtrlPolicyTableA table listing all policies that can be administered. SEQUENCE OF ILOMCtrlPolicyEntry .1.3.6.1.4.1.42.2.175.102.13.1 |
ilomCtrlPolicyEntryAn entry for a policy which can be enabled or disabled. ILOMCtrlPolicyEntry .1.3.6.1.4.1.42.2.175.102.13.1.1 |
ilomCtrlPolicyIdAn integer identifier of the policy. Integer32 .1.3.6.1.4.1.42.2.175.102.13.1.1.1 |
ilomCtrlPolicyShortStrA short description of the policy.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.13.1.1.2 |
ilomCtrlPolicyLongStrA verbose description of the policy.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.13.1.1.3 |
ilomCtrlPolicyEnabledIndicates the status of the policy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.13.1.1.4 |
ilomCtrlConfigMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.14 |
ilomCtrlResetToDefaultsActionThis property is used to initiate the action of restoring the configuration on the SP to the original factory default state.rw ILOMCtrlResetToDefaultsAction .1.3.6.1.4.1.42.2.175.102.14.1 |
ilomCtrlBackupAndRestore OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.14.2 |
ilomCtrlBackupAndRestoreTargetURIThis property is used to set target destination of configuration xml file during backup and restore. The syntax is {protocol}://[user:passwword]@]host[/][path/][file] for example tftp://10.8.136.154/remotedir/config_backup.xml currently, the supported protocols are: scp, tftp. for certain protocol which needs password field, please use ilomCtrlBackupAndRestoreProtocolPassword to set password.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.14.2.1 |
ilomCtrlBackupAndRestorePassphraseThis property is used to set passphrase for encrypt/decrypt sensitive data during backup and restore. For snmpget, it returns null as value.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.14.2.2 |
ilomCtrlBackupAndRestoreActionThis property is used to issue a action, either backup or restore.rw ILOMCtrlBackupAndRestoreAction .1.3.6.1.4.1.42.2.175.102.14.2.3 |
ilomCtrlBackupAndRestoreActionStatusThis property is used to monitor the current status of backup/restore.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.14.2.4 |
ilomCtrlSPARC OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.15 |
ilomCtrlSPARCDiags OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.15.1 |
ilomCtrlSPARCDiagsLevelIndicates the level of embedded diagnostics that should be run on the host during a boot. ***NOTE: this object is deprecated and replaced with these: ilomCtrlSPARCDiagsPowerOnLevel, ilomCtrlSPARCDiagsUserResetLevel, ilomCtrlSPARCDiagsErrorResetLevel While deprecated, this object will display advsettings(3), unless: - all 3 of the above are currently set to init(1), in which case this object will display min(1) - all 3 of the above are currently set to maximum(3), in which case this object will display max(2).rwdeprecated ILOMCtrlSPARCDiagsLevel .1.3.6.1.4.1.42.2.175.102.15.1.1 |
ilomCtrlSPARCDiagsTriggerIndicates the triggers of embedded diagnostics for the host.rw ILOMCtrlSPARCDiagsTrigger .1.3.6.1.4.1.42.2.175.102.15.1.2 |
ilomCtrlSPARCDiagsVerbosityIndicates the verbosity level of embedded diagnostics that should be run on the host during a boot. ***NOTE: this object is deprecated and replaced with these: ilomCtrlSPARCDiagsPowerOnVerbosity, ilomCtrlSPARCDiagsUserResetVerbosity, ilomCtrlSPARCDiagsErrorResetVerbosity. While deprecated, this object will display advsettings(3), unless: - all 3 of the above are currently set to minimum(1), in which case this object will display min(1) - all 3 of the above are currently set to maximum(3), in which case this object will display max(2).rwdeprecated ILOMCtrlSPARCDiagsVerbosity .1.3.6.1.4.1.42.2.175.102.15.1.3 |
ilomCtrlSPARCDiagsModeIndicates the modes for POST. POST will stop at the mode specified by this property.rw ILOMCtrlSPARCDiagsMode .1.3.6.1.4.1.42.2.175.102.15.1.4 |
ilomCtrlSPARCDiagsPowerOnLevelIndicates the level of embedded diagnostics that should be run on the host during a boot for the power-on-reset trigger.rw ILOMCtrlSPARCDiagsLevelAdv .1.3.6.1.4.1.42.2.175.102.15.1.5 |
ilomCtrlSPARCDiagsUserResetLevelIndicates the level of embedded diagnostics that should be run on the host during a boot for the user-reset trigger.rw ILOMCtrlSPARCDiagsLevelAdv .1.3.6.1.4.1.42.2.175.102.15.1.6 |
ilomCtrlSPARCDiagsErrorResetLevelIndicates the level of embedded diagnostics that should be run on the host during a boot for the error-reset trigger.rw ILOMCtrlSPARCDiagsLevelAdv .1.3.6.1.4.1.42.2.175.102.15.1.7 |
ilomCtrlSPARCDiagsPowerOnVerbosityIndicates the verbosity level of embedded diagnostics that should be run on the host during a boot for power-on-reset trigger.rw ILOMCtrlSPARCDiagsVerbosityAdv .1.3.6.1.4.1.42.2.175.102.15.1.8 |
ilomCtrlSPARCDiagsUserResetVerbosityIndicates the verbosity level of embedded diagnostics that should be run on the host during a boot for user-reset trigger.rw ILOMCtrlSPARCDiagsVerbosityAdv .1.3.6.1.4.1.42.2.175.102.15.1.9 |
ilomCtrlSPARCDiagsErrorResetVerbosityIndicates the verbosity level of embedded diagnostics that should be run on the host during a boot for error-reset trigger.rw ILOMCtrlSPARCDiagsVerbosityAdv .1.3.6.1.4.1.42.2.175.102.15.1.10 |
ilomCtrlSPARCDiagsStatusIndicates the progress of POST diagnostics on the host, expressed as a percentage.ro Integer32 .1.3.6.1.4.1.42.2.175.102.15.1.11 |
ilomCtrlSPARCDiagsActionAn action to take to control POST running on the host.rw ILOMCtrlSPARCDiagsAction .1.3.6.1.4.1.42.2.175.102.15.1.12 |
ilomCtrlSPARCDiagsHwChangeLevelIndicates the level of embedded diagnostics that should be run on the host during a boot for the hw-change trigger.rw ILOMCtrlSPARCDiagsLevelAdv .1.3.6.1.4.1.42.2.175.102.15.1.13 |
ilomCtrlSPARCDiagsHwChangeVerbosityIndicates the verbosity level of embedded diagnostics that should be run on the host during a boot for hw-change trigger.rw ILOMCtrlSPARCDiagsVerbosityAdv .1.3.6.1.4.1.42.2.175.102.15.1.14 |
ilomCtrlSPARCHostControl OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.15.2 |
ilomCtrlSPARCHostMACAddressDisplays the starting MAC address for the host.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.15.2.1 |
ilomCtrlSPARCHostOBPVersionDisplays the version string for OBP.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.15.2.3 |
ilomCtrlSPARCHostPOSTVersionDisplays the version string for POST.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.15.2.4 |
ilomCtrlSPARCHostAutoRunOnErrorThis option determines whether the host should continue to boot in the event of a non-fatal POST error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.15.2.6 |
ilomCtrlSPARCHostPOSTStatusA string that describes the status of POST. ***NOTE: OS Boot status is ilomCtrlSPARCHostOSBootStatus.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.15.2.7 |
ilomCtrlSPARCHostAutoRestartPolicyThis determines what action the SP should take when it discovers that the host is hung.rw ILOMCtrlSPARCHostAutoRestartPolicy .1.3.6.1.4.1.42.2.175.102.15.2.8 |
ilomCtrlSPARCHostOSBootStatusA string that describes the boot status of host OS.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.15.2.9 |
ilomCtrlSPARCHostBootTimeoutThis is the boot timer time out value.rw Integer32 .1.3.6.1.4.1.42.2.175.102.15.2.10 |
ilomCtrlSPARCHostBootRestartThis determines what action the SP should take when the boot timer expires.rw ILOMCtrlSPARCHostBootRestart .1.3.6.1.4.1.42.2.175.102.15.2.11 |
ilomCtrlSPARCHostMaxBootFailThis is the number of max boot failures allowed.rw Integer32 .1.3.6.1.4.1.42.2.175.102.15.2.12 |
ilomCtrlSPARCHostBootFailRecoveryThis determines what action the SP should take when the max boot failures are reached.rw ILOMCtrlSPARCHostBootFailRecovery .1.3.6.1.4.1.42.2.175.102.15.2.13 |
ilomCtrlSPARCHostHypervisorVersionDisplays the version string for Hypervisor.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.15.2.14 |
ilomCtrlSPARCHostSysFwVersionDisplays the version string for SysFw.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.15.2.15 |
ilomCtrlSPARCHostSendBreakActionSend Break Action to Hostrw ILOMCtrlSPARCHostSendBreakAction .1.3.6.1.4.1.42.2.175.102.15.2.16 |
ilomCtrlSPARCHostIoReconfigurePolicyThis determines the host IO reconfiguration policy to apply on next host power-on.rw ILOMCtrlSPARCHostIoReconfigurePolicy .1.3.6.1.4.1.42.2.175.102.15.2.17 |
ilomCtrlSPARCHostGMVersionDisplays the version string for Guest Manager.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.15.2.18 |
ilomCtrlSPARCBootMode OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.15.3 |
ilomCtrlSPARCBootModeStateConfigures the boot mode state for the host. Specifying 'normal' means that the host retains current NVRAM variable settings. Specifying 'resetNvram' means that all NVRAM settings will be reset to their default values.rw ILOMCtrlSPARCBootModeState .1.3.6.1.4.1.42.2.175.102.15.3.1 |
ilomCtrlSPARCBootModeScriptSpecifies the script to run when host boots.rw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.15.3.2 |
ilomCtrlSPARCBootModeExpiresDisplays the date and time for when the boot mode configuration should expire.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.102.15.3.3 |
ilomCtrlSPARCBootModeLDOMConfigThis string refers to the config name value that must either be 'default' or match a named LDOM configuration downloaded to the service processor using the LDOM Manager.rw SnmpAdminString .1.3.6.1.4.1.42.2.175.102.15.3.4 |
ilomCtrlSPARCKeySwitch OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.15.4 |
ilomCtrlSPARCKeySwitchStateSpecifies the current state of the virtual key switch.rw ILOMCtrlSPARCKeySwitchState .1.3.6.1.4.1.42.2.175.102.15.4.1 |
ilomCtrlIdentification OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.16 |
ilomCtrlSystemIdentifierThis string, which is often the host name of the server associated with ILOM, will be sent out in the varbind for all traps that ILOM generates.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.16.1 |
ilomCtrlHostNameThis string is the hostname for ILOM.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.16.2 |
ilomCtrlThd OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.17 |
ilomCtrlThdStateThe state of the THD daemon.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.17.1 |
ilomCtrlThdActionControl action for THD daemon, either suspend or resume.rw ILOMCtrlThdAction .1.3.6.1.4.1.42.2.175.102.17.2 |
ilomCtrlThdModulesTableA table listing the currently loaded THD modules. SEQUENCE OF ILOMCtrlThdModulesEntry .1.3.6.1.4.1.42.2.175.102.17.3 |
ilomCtrlThdModulesEntryAn entry for a currently loaded THD module. ILOMCtrlThdModulesEntry .1.3.6.1.4.1.42.2.175.102.17.3.1 |
ilomCtrlThdModuleNameThe name of the THD module. ILOMCtrlTargetIndex .1.3.6.1.4.1.42.2.175.102.17.3.1.1 |
ilomCtrlThdModuleDescThe description of the THD module.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.17.3.1.2 |
ilomCtrlThdModuleStateThe state of the THD module.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.17.3.1.3 |
ilomCtrlThdModuleActionThe control action for the THD module.rw ILOMCtrlThdAction .1.3.6.1.4.1.42.2.175.102.17.3.1.4 |
ilomCtrlThdInstanceTableA table listing instances of currently loaded THD modules. SEQUENCE OF ILOMCtrlThdInstanceEntry .1.3.6.1.4.1.42.2.175.102.17.4 |
ilomCtrlThdInstanceEntryAn entry for a currently loaded THD module. ILOMCtrlThdInstanceEntry .1.3.6.1.4.1.42.2.175.102.17.4.1 |
ilomCtrlThdModNameThe name of the THD class of the instance. ILOMCtrlModTargetIndex .1.3.6.1.4.1.42.2.175.102.17.4.1.1 |
ilomCtrlThdInstanceNameThe name of the instance. ILOMCtrlInstanceTargetIndex .1.3.6.1.4.1.42.2.175.102.17.4.1.2 |
ilomCtrlThdInstanceStateThe state of the instance.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.102.17.4.1.3 |
ilomCtrlThdInstanceActionThe control action for instance.rw ILOMCtrlThdAction .1.3.6.1.4.1.42.2.175.102.17.4.1.4 |
ilomCtrlConformances OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.18 |
ilomCtrlCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.18.1 |
ilomCtrlGroups OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.102.18.2 |
ilomCtrlDeprecatedObjectsGroupThe objects that have been deprecated.deprecated Unknown .1.3.6.1.4.1.42.2.175.102.18.2.1 |
ilomCtrlObjectsGroupThe group of current objects. Unknown .1.3.6.1.4.1.42.2.175.102.18.2.2 |