Juniper-PIM-MIB
The enterprise MIB module for management of PIM routers.
Main OID:
juniPimMIB.1.3.6.1.4.1.4874.2.2.43
151
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
151 total| Object Name |
|---|
juniPimMIBThe enterprise MIB module for management of PIM routers. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.43 |
juniPimMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.1 |
juniPimTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.1.0 |
juniPimGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.1.1 |
juniPimNumHelloRcvdTotal number of Hellos received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.1 |
juniPimNumJoinPruneRcvdTotal number of JoinPrunes received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.2 |
juniPimNumAssertRcvdTotal number of Asserts received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.3 |
juniPimNumGraftRcvdTotal number of Grafts received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.4 |
juniPimNumGraftAckRcvdTotal number of Graft Acks received by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.5 |
juniPimNumHelloSentTotal number of Hellos sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.6 |
juniPimNumJoinPruneSentTotal number of JoinPrunes sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.7 |
juniPimNumAssertSentTotal number of Asserts sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.8 |
juniPimNumGraftSentTotal number of Grafts sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.9 |
juniPimNumGraftAckSentTotal number of Graft Acks sent by PIM on this router.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.10 |
juniPimInterfaceTableThe (conceptual) table listing enterprise specific information on a subset of the rows of the pimInterfaceTable defined in the standard PIM MIB. SEQUENCE OF JuniPimInterfaceEntry .1.3.6.1.4.1.4874.2.2.43.1.1.11 |
juniPimInterfaceEntryAn entry (conceptual row) in the juniPimInterfaceTable. There is one entry per entry in the pimInterfaceTable. JuniPimInterfaceEntry .1.3.6.1.4.1.4874.2.2.43.1.1.11.1 |
juniPimIntfNumHelloRcvdTotal number of Hellos received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.1 |
juniPimIntfNumJoinPruneRcvdTotal number of JoinPrunes received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.2 |
juniPimIntfNumAssertRcvdTotal number of Asserts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.3 |
juniPimIntfNumGraftRcvdTotal number of Grafts received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.4 |
juniPimIntfNumGraftAckRcvdTotal number of Graft Acks received by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.5 |
juniPimIntfNumHelloSentTotal number of Hellos sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.6 |
juniPimIntfNumJoinPruneSentTotal number of JoinPrunes sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.7 |
juniPimIntfNumAssertSentTotal number of Asserts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.8 |
juniPimIntfNumGraftSentTotal number of Grafts sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.9 |
juniPimIntfNumGraftAckSentTotal number of Graft Acks sent by PIM on this interface. It can only be cleared to 0 when doing set. Setting this also sets counters for other types of packets to 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.10 |
juniPimIntfVersionThe version of PIM running on this interface.ro INTEGER .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.11 |
juniPimIntfNumNbrsNumber of PIM neighbors detected on this interface.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.11.1.12 |
juniPimMRouteTableThe (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> states. SEQUENCE OF JuniPimMRouteEntry .1.3.6.1.4.1.4874.2.2.43.1.1.12 |
juniPimMRouteEntryAn entry (conceptual row) in the juniPimMRouteTable. JuniPimMRouteEntry .1.3.6.1.4.1.4874.2.2.43.1.1.12.1 |
juniPimMRouteGroupThe group address. Specified as 224.0.0.0 for <*, *, RP> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.1 |
juniPimMRouteSourceThe source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.2 |
juniPimMRouteSourceMaskThe source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.3 |
juniPimMRouteRPAddressThe RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.4 |
juniPimMRouteUpstreamAssertTimerThe time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.5 |
juniPimMRouteAssertMetricThe metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.6 |
juniPimMRouteAssertPrefThe preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.7 |
juniPimMRouteAssertRPTBitThe value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.8 |
juniPimMRouteBitsThis object describes whether the entry is on shared tree (RPT) or shortest path tree (SPT).ro Bits .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.9 |
juniPimMRouteRPAddrInUseThe RP Address being used for the <S, G>RPT/<*, G>/<*, *, RP> entries. Set to 0.0.0.0 for <S, G> entries on shortest path tree.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.10 |
juniPimMRouteUpstreamNbrThe address of upstream neighbor being used for the entry. Its set to 0.0.0.0 if the router is directly attached to source on one of its interface.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.11 |
juniPimMRouteIifAddrThe address of incoming interface for this entry.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.12 |
juniPimMRouteIsWaitingToSwitchToSPTThis object describes whether the entry is still waiting to switch completely to shortest path tree in case of <S, G> entries. It waits to do this till it receives first packet from incoming interface towards shortest path tree.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.13 |
juniPimMRouteEntryExpiryTimerThe time after which the entry timer expires for this entry. Set to 0 if entry timer is not active.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.14 |
juniPimMRouteSenderDRAddrThe address of the designated router on the sender's subnet in case of <S, G> entries. The sender designated router register encapsulates data to RP. Set to 0.0.0.0 for <*, G> and <*, *, RP> entries.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.15 |
juniPimMRouteRouteAddrThe address of the route being used to do RPF check for this entry. It is set to 0.0.0.0 (with juniPimMRouteRouteMask set to 255.255.255.255) if there is no route available.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.16 |
juniPimMRouteRouteMaskThe mask of the route being used to do RPF check for this entry. It is set to 255.255.255.255 (with juniPimMRouteRoute set to 0.0.0.0) if there is no route available.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.17 |
juniPimMRouteGRPAddrThe address of the group-to-RP mapping being used to get the RP for this entry. It is set to 0.0.0.0 (with juniPimMRouteGRPMask set to 0.0.0.0) if there is no group-to-RP mapping available or if entry is <*, *, RP>.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.18 |
juniPimMRouteGRPMaskThe mask of the group-to-RP mapping being used to get the RP for this entry. It is set to 255.255.255.255 (with juniPimMRouteGRPAddr set to 0.0.0.0) if there is no group-to-RP mapping available or if entry is <*, *, RP>.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.19 |
juniPimMRouteOtherProtoOifJoinTypeAllThis object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving all data. This will be particularly true for dense mode protocols which would want all data (<*, *>) from PIM sparse mode protocol.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.20 |
juniPimMRouteOtherProtoOifJoinTypeGThis object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a given group. This will be particularly true for IGMP which would want data for a given group (<*, G>) from PIM protocol.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.21 |
juniPimMRouteOtherProtoOifJoinTypeSGThis object indicates if some other multicast protocol is also interested in receiving data for this entry as a result of its interest in receiving data for a given <source, group>. This will be particularly true for IGMPv3 which would want data for a given <source, group (<S, G>) from PIM sparse-mode protocol.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.22 |
juniPimMRoutePimTypeThis object indicates if the owner of this entry is Sparse mode or Dense mode PIM. Owner is usually determined by the protocol running on the incoming interface of the entry. In case sparse-dense mode PIM is running on the incoming interface, sparse-mode is the owner if RP for the group is known, else dense mode is the owner.ro JuniPimType .1.3.6.1.4.1.4874.2.2.43.1.1.12.1.23 |
juniPimMRouteNextHopTableThe (conceptual) table listing PIM multicast routing information describing its <*, *, RP>/ <*, G>/ <S, G> outgoing interfaces. SEQUENCE OF JuniPimMRouteNextHopEntry .1.3.6.1.4.1.4874.2.2.43.1.1.13 |
juniPimMRouteNextHopEntryAn entry (conceptual row) in the juniPimMRouteNextHopTable. JuniPimMRouteNextHopEntry .1.3.6.1.4.1.4874.2.2.43.1.1.13.1 |
juniPimMRouteNextHopGroupAddrThe group address. Specified as 224.0.0.0 for <*, *, RP> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.2 |
juniPimMRouteNextHopSrcAddrThe source address. Specified as 0.0.0.0 for <*, *, RP> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.3 |
juniPimMRouteNextHopSrcMaskThe source address mask. Specified as 255.255.255.255 for <S, G> entries and 0.0.0.0 for <*, *, RP> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.4 |
juniPimMRouteNextHopRPAddrThe RP address used for <*, *, RP>. Specified as 0.0.0.0 for <S, G> and <*, G> entries. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.5 |
juniPimMRouteNextHopIfIdThe interface index of the outgoing interface (next hop). Specified as 0 for register outgoing interface. Register outgoing interfaces are created by DR on the source subnet to send PIM register encapsulated data (as unicast) to RP. It is also used by PIM boundary routers (PMBRs) to register data to RP. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.6 |
juniPimMRouteNextHopAddressThis object takes following different values based on the type of next hop. It should be set to the address of RP in case the next hop interface is register interface i.e. juniPimMRouteNextHopIfId object is set to 0. It should be set to the address of neighbor in case the interface is an NBMA interface. In all other cases it should be set to the group address itself. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.7 |
juniPimMRouteNextHopPruneReasonThis object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing.ro Enumeration .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.8 |
juniPimMRouteNextHopJoinTypeSSRPThis object indicates whether or not the interface was added as a result of receiving <*, *, RP> join in case of <*, *, RP> entry OR inherited as outgoing interface from corresponding <*, *, RP> entry in case of <*, G> entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.9 |
juniPimMRouteNextHopJoinTypeGThis object indicates whether or not the interface was added as a result of receiving <*, G> join in case of <*, G> entry OR inherited as outgoing interface from corresponding <*, G> entry in case of <S, G> entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.10 |
juniPimMRouteNextHopJoinTypeSGThis object indicates whether or not the interface was added as a result of receiving <S, G> join in case of <S, G> entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.11 |
juniPimMRouteNextHopHasLGMThis object indicates whether or not the interface has local group membership (as indicated by IGMP) in case of <*, G> and <S, G> entries.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.12 |
juniPimMRouteNextHopHasOifAWThis object indicates whether or not this interface is the winner of assert for corresponding <*, G>/<S, G> entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.13 |
juniPimMRouteNextHopHasOifSendAssertThis object indicates whether or not this interface is going to send an assert at the end of assert suppression interval. Assert suppression is used to prevent a flood of assert to be generated in response to data or other asserts.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.14 |
juniPimMRouteNextHopHasOifRegisterThis object indicates whether or not this next hop is a register outgoing interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.15 |
juniPimMRouteNextHopHasOifBorderBitThis object is used to describe a register outgoing interface. It indicates whether or not the border bit is set in the register packet when the packet is sent over the register interface. For all other (non-register) interfaces its set to false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.16 |
juniPimMRouteNextHopHasOifNullEncapsBitThis object is used to describe a register outgoing interface. It indicates whether or not the NULL encapsulation bit is set (periodically) in the register packet when the packet is sent over the register interface. For all other (non-register) interfaces its set to false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.17 |
juniPimMRouteNextHopJoinEndTimerThis object indicates the time (in seconds) left when the join timer expires for the outgoing interface. Join timer for an outgoing interface of <S, G> entry indicates when the <S, G> join expires, for a <*, G> entry indicates when the <*, G> join expires and for a <*, *, RP> entry indicates when the <*, *, RP> join expires. Inherited joins (like <S, G> inheriting from <*, G> AND <*, G> inheriting from <*, *, RP>) expire when the corresponding parent join expires.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.18 |
juniPimMRouteNextHopAssertEndTimerThis object indicates the time (in seconds) left when the assert timer expires on this outgoing inteface.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.19 |
juniPimMRouteNextHopNextAssertTimerThis object indicates the duration (in seconds) left for which sending an assert has been suppressed on this outgoing interface.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.20 |
juniPimMRouteNextHopAssertSrcAddressThis object indicates the source address which will be used in the assert packet to send an assert out for the entry on this outgoing interface. For <S, G> entries it is the address of the source S itself. For <*, G> entries it is the address of the source whose data was forwarded using this <*, G> and caused the assert situation to happen.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.21 |
juniPimMRouteNextHopRegisterSuppressionTimerThis object is used for register outgoing interfaces. It indicates the duration (in seconds) left for which sending a register packet has been suppressed on the register outgoing interface as a result of receiving register-stop from the RP.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.22 |
juniPimMRouteNextHopPimTypeThis object indicates whether the outgoing interface was contributed by sparse-mode or dense-mode PIM.ro JuniPimType .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.23 |
juniPimMRouteNextHopPruneTimeLeftThis object indicates the time (in seconds) left when the prune timer expires on an outgoing inteface. Its used for pruned outgoing interfaces contributed by dense-mode PIM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.24 |
juniPimMRouteNextHopsendingIpAddressThis object describes the source IP address used by this interface to send PIM packets out on this outgoing interface.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.13.1.25 |
juniPimRPSetTableThe (conceptual) table listing enterprise specific information on a subset of the rows of the pimRPSetTable defined in the standard PIM MIB. SEQUENCE OF JuniPimRPSetEntry .1.3.6.1.4.1.4874.2.2.43.1.1.14 |
juniPimRPSetEntryAn entry (conceptual row) in the juniPimRPSetTable. JuniPimRPSetEntry .1.3.6.1.4.1.4874.2.2.43.1.1.14.1 |
juniPimRPSetPriorityThis object describes the priority of the RP for this group-to-RP mapping.ro Integer32 (1..'FFFF'h) .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.1 |
juniPimRPSetTypeInfoThis object describes the mechanism by which this group to RP mapping has been learnt, i.e. whether its statically configured, AutoRP learnt or BSR learnt. It also indicates whether the mapping is positive or negative. Negative mappings force the groups in that range to fall into dense-mode category if sparse-dense mode is configured or no RP if its purely sparse mode configuration.ro Enumeration .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.2 |
juniPimRPSetAccessListNameThis object lists the name of the access list from which this group-to-RP mapping was picked up in case of statically configured RPs.ro OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.14.1.3 |
juniPimStaticRPConfTableThe (conceptual) table listing statically configured PIM RPs. SEQUENCE OF JuniPimStaticRPConfEntry .1.3.6.1.4.1.4874.2.2.43.1.1.15 |
juniPimStaticRPConfEntryAn entry (conceptual row) in the juniPimStaticRPConfTable. JuniPimStaticRPConfEntry .1.3.6.1.4.1.4874.2.2.43.1.1.15.1 |
juniPimStaticRPConfComponentIndexA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.1 |
juniPimStaticRPConfRPAddrIp address of the RP which for the group-to-RP mapping being configured. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.2 |
juniPimStaticRPConfAccessListNameName of the access list from which group-ranges are picked up for this group-ro-RP mapping. Every deny component in the list is added as negative group-ro-RP mapping. OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.3 |
juniPimStaticRPConfRowStatusThe status of this row, by which new entries may be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.4 |
juniPimStaticRPConfOverrideThe object indicates whether or not this statically configured group-to-RP mapping should override the group-to-RP mapping learnt via AutoRP for the component group-ranges in the access list. By default AutoRP learnt group-to-RP mappings are preferred over statically configured ones. While setting the rowStatus to create a static RP, this field should be assigned to true if the override property is desired.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.15.1.5 |
juniPimAutoRPConfTableThe (conceptual) table allowing AutoRP configuration of candidate RPs (advertisement agents). SEQUENCE OF JuniPimAutoRPConfEntry .1.3.6.1.4.1.4874.2.2.43.1.1.16 |
juniPimAutoRPConfEntryAn entry (conceptual row) in the juniPimAutoRPConfTable. JuniPimAutoRPConfEntry .1.3.6.1.4.1.4874.2.2.43.1.1.16.1 |
juniPimAutoRPConfComponentIndexA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.1 |
juniPimAutoRPConfCandRPAddrThe IP address of the candidate RP for this advertising agent configuration. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.2 |
juniPimAutoRPConfGroupAccessListNameThe access list name from which group ranges are picked up for advertising agent configuration. OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.3 |
juniPimAutoRPConfRowStatusThe status of this row, by which new entries may be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.4 |
juniPimAutoRPConfTTLThe time-to-live value used while sending AutoRP advertisement out for this group-to-RP mappings created as a result of this configuration. This should be set along with juniPimAutoRPConfRowStatus while creating an AutoRP advertising agent to denote the TTL value to be used.rw Integer32 (1..'FFFF'h) .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.5 |
juniPimAutoRPConfAncmntIntvlThe time interval at which AutoRP advertisements are sent out for the group-to-RP mappings created as a result of this configuration. This should be set along with juniPimAutoRPConfRowStatus while creating an AutoRP advertising agent to denote the announcement interval to be used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.6 |
juniPimAutoRPConfifIdThe interface index of the interface for the candidate RP if an interface with that address exists else it is set to 0.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.16.1.7 |
juniPimAutoRPCandTableThe (conceptual) table listing AutoRP candidate RPS (advertising agents). SEQUENCE OF JuniPimAutoRPCandEntry .1.3.6.1.4.1.4874.2.2.43.1.1.17 |
juniPimAutoRPCandEntryAn entry (conceptual row) in the juniPimAutoRPCandTable. JuniPimAutoRPCandEntry .1.3.6.1.4.1.4874.2.2.43.1.1.17.1 |
juniPimAutoRPCandComponentIndexA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.1 |
juniPimAutoRPCandRPAddrThe IP address of the candidate RP for this group-to-RP mapping. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.2 |
juniPimAutoRPCandGroupAddrThe group address of the candidate RP for this group-to-RP mapping. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.3 |
juniPimAutoRPCandGroupMaskThe group mask of the candidate RP for this group-to-RP mapping. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.4 |
juniPimAutoRPCandRowStatusThe current status of this row.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.5 |
juniPimAutoRPCandAccessListNameThe name of the group list using which this AutoRP group-to-RP candidate RP mapping was configured.ro OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.6 |
juniPimAutoRPCandAutoRPTTLThe time-to-live value used while sending AutoRP advertisement out for this group-to-RP mapping.ro Integer32(1..'FFFF'h) .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.7 |
juniPimAutoRPCandAutoRPAncmntIntvlThe time interval at which AutoRP advertisements are sent out for this group-to-RP mapping.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.8 |
juniPimAutoRPCandIfIdThe interface index of the interface for this AutoRP group-to-RP candidate RP mapping if an interface for RP address exists else it is set to 0.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.17.1.9 |
juniPimComponentTableThe (conceptual) table listing each component (domain) in PIM. SEQUENCE OF JuniPimComponentEntry .1.3.6.1.4.1.4874.2.2.43.1.1.18 |
juniPimComponentEntryAn entry (conceptual row) in the juniPimComponentTable. JuniPimComponentEntry .1.3.6.1.4.1.4874.2.2.43.1.1.18.1 |
juniPimComponentIndexA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.1 |
juniPimComponentAutoRPMappingAgentRowStatusThe status of AutoRP mapping agent by which this router can be made an AutoRP mapping agent or removed from being an AutoRP mapping agent in this component.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.2 |
juniPimComponentConfiguredAutoRPMappingAgentIfIdThe interface index of the interface which mapping agent should use to send AutoRP mapping messages. If not specified, the interface with highest IP address in this domain is picked up for this purpose.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.3 |
juniPimComponentAutoRPMappingAgentIntervalThe time interval at which AutoRP mapping messages are sent out in this component. The default value is 60 seconds.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.4 |
juniPimComponentAutoRPMappingTTLThe time-to-live value used while sending AutoRP mapping messages out in this component.rw Integer32 (1..'FFFF'h) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.5 |
juniPimComponentAutoRPMappingAgentIntfAddrThe IP address of the interface which mapping agent is using to send AutoRP mapping messages.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.6 |
juniPimComponentAutoRPMappingAgentWinnerAddrThe IP address of the winner AutoRP mapping agent. There can be multiple mapping agents configured in a given PIM domain(component). The mapping agent with highest IP address is chosen as the winner and it continues to send AutoRP mapping messages. If the router itself is the winner, then this is set to 0.0.0.0.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.7 |
juniPimComponentAutoRPMappingAgentWinnerLastHeardThe time (in seconds) that has past since an AutoRP mapping message was receieved from the winner AutoRP mapping agent. If the router itself is the winner, then this is set to 0.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.43.1.1.18.1.8 |
juniPimUnicastRouteTableThe (conceptual) table listing all the unicast routes currently in use by PIM for diong RPF checking. SEQUENCE OF JuniPimUnicastRouteEntry .1.3.6.1.4.1.4874.2.2.43.1.1.19 |
juniPimUnicastRouteEntryAn entry (conceptual row) in the juniPimUnicastRouteTable. JuniPimUnicastRouteEntry .1.3.6.1.4.1.4874.2.2.43.1.1.19.1 |
juniPimUnicastRouteEntryAddrThe address of route in use. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.1 |
juniPimUnicastRouteEntryMaskThe mask of route in use. IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.2 |
juniPimUnicastRouteEntryRpfNbrThe RPF neighbor (next-hop) to reach the route of this entry. It is set to 0.0.0.0 for directly connected routes.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.3 |
juniPimUnicastRouteEntryIifIdThe interface index (next-hop) to reach the route of this entry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.4 |
juniPimUnicastRouteEntryIifAddrThe interface address (next-hop) to reach the route of this entry.ro IpAddress .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.5 |
juniPimUnicastRouteEntryPrefThe preference of the route of this entry.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.6 |
juniPimUnicastRouteEntryMetricThe metric of the route of this entry.ro Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.7 |
juniPimUnicastRouteEntryPimTypeThis object indicates whether the route specified in this entry is being used by sparse-mode and/or dense-mode PIM.ro JuniPimType .1.3.6.1.4.1.4874.2.2.43.1.1.19.1.8 |
juniPimSPTThresholdTableThe (conceptual) table listing threshold values set for switching from shared tree to shortest path tree and vice versa for data forwarded by PIM sparse-mode. SEQUENCE OF JuniPimSPTThresholdEntry .1.3.6.1.4.1.4874.2.2.43.1.1.20 |
juniPimSPTThresholdEntryAn entry (conceptual row) in the juniPimSPTThresholdTable. JuniPimSPTThresholdEntry .1.3.6.1.4.1.4874.2.2.43.1.1.20.1 |
juniPimSPTThresholdAccessListNameThe name of the access list from which group ranges are picked up for setting SPT threshold in this entry. OCTET STRING .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.1 |
juniPimSPTThresholdRowStatusThe status of this row, by which new entries may be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.2 |
juniPimSPTThresholdKbpsThe value of SPT threshold in kilobits per second. Default value is 0.rw Integer32 .1.3.6.1.4.1.4874.2.2.43.1.1.20.1.3 |
juniPimConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.2 |
juniPimCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.2.1 |
juniPimComplianceThe compliance statement for entities which implement the Juniper PIM MIB. Unknown .1.3.6.1.4.1.4874.2.2.43.2.1.1 |
juniPimGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.43.2.2 |
juniPimGeneralGroupA collection of objects for managing general PIM capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.1 |
juniPimInterfaceGroupA collection of objects for managing PIM interface capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.2 |
juniPimMRouteConfGroupA collection of objects for managing PIM multicast route capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.3 |
juniPimMRouteNextHopGroupA collection of objects for managing PIM multicast route next hop capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.4 |
juniPimRPSetGroupA collection of objects for managing PIM RP-Set capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.5 |
juniPimStaticRPConfGroupA collection of objects for managing statically configured PIM RPs capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.6 |
juniPimAutoRPConfGroupA collection of objects for managing PIM AutoRP candidate advertisment agent RP capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.7 |
juniPimAutoRPCandGroupA collection of objects for managing PIM AutoRP candidate advertising agent RP capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.8 |
juniPimComponentGroupA collection of objects for managing PIM component (domain) capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.9 |
juniPimUnicastRouteGroupA collection of objects for managing PIM unicast route capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.10 |
juniPimSPTThresholdGroupA collection of objects for managing PIM shortest path tree threshold capabilities in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.43.2.2.11 |