L2PROTOCOL-TUNNEL-MIB
The structure of Layer 2 protocol tunneling for the proprietary enterprise.
Main OID:
swL2ProtocolTunnelMIB.1.3.6.1.4.1.171.12.93
12
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
12 total| Object Name |
|---|
swL2ProtocolTunnelMIBThe structure of Layer 2 protocol tunneling for the proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.12.93 |
swL2PTMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.93.1 |
swL2PTStateThis object indicates the global state of Layer 2 protocol tunneling.rw Enumeration .1.3.6.1.4.1.171.12.93.1.1 |
swL2PTPortTableA table that contains the Layer 2 protocol tunneling information of each port. SEQUENCE OF SwL2PTPortEntry .1.3.6.1.4.1.171.12.93.1.2 |
swL2PTPortEntryA list with the Layer 2 protocol tunneling information of each port. SwL2PTPortEntry .1.3.6.1.4.1.171.12.93.1.2.1 |
swL2PTPortIndexThis object indicates the port number. INTEGER .1.3.6.1.4.1.171.12.93.1.2.1.1 |
swL2PTPortTypeThis object indicates the Layer 2 protocol tunneling port type. The 'none' value indicates that the port is normal. Layer 2 protocol tunneling is disabled on this port. The 'uni' value indicates that the port is connected to the customer site. A Layer 2 PDU received on a UNI port can be tunneled to a remote customer site across the provider network. The 'nni' value indicates that the port is connected to the provider network. A Tunneled Layer 2 PDU received on an NNI port will be restored to its original format.rw Enumeration .1.3.6.1.4.1.171.12.93.1.2.1.2 |
swL2PTProtocolThis object indicates the tunneled protocols on this port. This object can only be applied on a UNI port. If the 'stp' BIT is set, the STP BPDU will be tunneled. If the 'gvrp' BIT is set, the GVRP PDU will be tunneled. If the 'mac-01-00-0C-CC-CC-CC' BIT is set, the PDU with the destination MAC address 01-00-0C-CC-CC-CC will be tunneled . If the 'mac-01-00-0C-CC-CC-CD' BIT is set, then the PDU with the destination MAC address 01-00-0C-CC-CC-CD will be tunneled.rw Bits .1.3.6.1.4.1.171.12.93.1.2.1.3 |
swL2PTThresholdTableThis table contains the protocol tunneling threshold of a UNI port. SEQUENCE OF SwL2PTThresholdEntry .1.3.6.1.4.1.171.12.93.1.3 |
swL2PTThresholdEntryA list with the Layer2 Protocol tunneling threshold. SwL2PTThresholdEntry .1.3.6.1.4.1.171.12.93.1.3.1 |
swL2PTProtocolIndexThis object indicates the tunneled protocol of the port. Enumeration .1.3.6.1.4.1.171.12.93.1.3.1.1 |
swL2PTDropThresholdThis object indicates the drop threshold for a given protocol on a UNI port. If the arrival rate of a tunneled protocol has reached its threshold, the received PDUs of this protocol will be dropped. The value 0 indicates there is no threshold for the protocol.rw INTEGER .1.3.6.1.4.1.171.12.93.1.3.1.2 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→