Juniper-TSM-MIB
The Juniper-TSM-MIB enables SNMP-based monitoring and management of Juniper Networks Tunnel Server Management (TSM) services, specifically tracking tunnel interface states, session establishment and termination counters, and resource utilization metrics for IPsec or GRE tunnel endpoints.
Imported Objects
Objects
26 total| Object Name |
|---|
juniTsmMIBThe Tunnel Server Management (TSM) MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.72 |
juniTsmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.72.1 |
juniTsmData OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.72.1.1 |
juniTsmLocationTypeDescribes the interpretation of JuniTsmLocationValue object values into platform-dependent interface location components, e.g., 'slot.port'.ro JuniTsmLocationType .1.3.6.1.4.1.4874.2.2.72.1.1.1 |
juniTsmPortTableThis table allows dynamic server ports to be configured and also provides information about static ports available in the system. This table represents all ports known to the system. The presence of a port in this table does not guarantee that a card with this port is present in the chassis. SEQUENCE OF JuniTsmPortEntry .1.3.6.1.4.1.4874.2.2.72.1.1.2 |
juniTsmPortEntryConfiguration data. JuniTsmPortEntry .1.3.6.1.4.1.4874.2.2.72.1.1.2.1 |
juniTsmPortLocationThe value of a port location. JuniTsmLocationValue .1.3.6.1.4.1.4874.2.2.72.1.1.2.1.1 |
juniTsmPortTypeThe port type: generalPurposeStatic - statically configured (always on) port, generalPurposeDynamic - dynamic port, which could be both configured with different maximum number of interfaces and unconfigured, securityStatic - static port equipped with encryption (IPSEC) hardware. securityDynamic - dynamic port with encryption (IPSEC) hardware, which could be both configured with different maximum number of interfaces and unconfigured.ro Enumeration .1.3.6.1.4.1.4874.2.2.72.1.1.2.1.2 |
juniTsmPortHwPresentThe port hardware is inserted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.72.1.1.2.1.3 |
juniTsmPortAvailableInterfacesMaximum number of interfaces available on the port.ro Integer32 .1.3.6.1.4.1.4874.2.2.72.1.1.2.1.4 |
juniTsmPortProvisionedInterfacesNumber of interfaces provisioned on the port. '-1' means all available interfaces. If port is static this value cannot be changed. If the number of provisioned interfaces is decreased it may require a lengthy 'draining' process to bring number of allocated interfaces into compliance.rw Integer32 (-1..16000) .1.3.6.1.4.1.4874.2.2.72.1.1.2.1.5 |
juniTsmAppRegistryTableThis table describes currently registered applications. SEQUENCE OF JuniTsmAppRegistryEntry .1.3.6.1.4.1.4874.2.2.72.1.1.3 |
juniTsmAppRegistryEntryApplication data. JuniTsmAppRegistryEntry .1.3.6.1.4.1.4874.2.2.72.1.1.3.1 |
juniTsmAppRegistryIndexA small integer identifying registered application. Once an application is registered, this integer will be associated with the application until the next reboot. Integer32 .1.3.6.1.4.1.4874.2.2.72.1.1.3.1.1 |
juniTsmAppRegistryIfTypeInterface type associated with the application.ro JuniIfType (Juniper-UNI-IF-MIB) .1.3.6.1.4.1.4874.2.2.72.1.1.3.1.2 |
juniTsmAppRegistryNameThe name of the application used by the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.72.1.1.3.1.3 |
juniTsmAppRegistryInterfaceLimitThe maximum number of interfaces per port this application supports. (The number of interfaces could be further limited by the port capacity.)ro Integer32 .1.3.6.1.4.1.4874.2.2.72.1.1.3.1.4 |
juniTsmApplicationTableThe entries in this table describe application load on tunnel servers. This table includes only applications which are actually being used. SEQUENCE OF JuniTsmApplicationEntry .1.3.6.1.4.1.4874.2.2.72.1.1.4 |
juniTsmApplicationEntryConfiguration data. JuniTsmApplicationEntry .1.3.6.1.4.1.4874.2.2.72.1.1.4.1 |
juniTsmApplicationMaxInterfacesMaximum number of interfaces available on the port for the application. Applications allocate interfaces from a common pool, so this is not the only limit of application level interfaces. This value could be greater than juniTsmPortProvisionedInterfaces when the port is draining interfaces.ro Integer32 .1.3.6.1.4.1.4874.2.2.72.1.1.4.1.1 |
juniTsmApplicationActiveInterfacesNumber of application interfaces in use on the port. This value could be greater than juniTsmPortProvisionedInterfaces when the port is draining interfaces.ro Gauge32 .1.3.6.1.4.1.4874.2.2.72.1.1.4.1.2 |
juniTsmMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.72.4 |
juniTsmMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.72.4.1 |
juniTsmComplianceThe compliance statement for TSM mib. Unknown .1.3.6.1.4.1.4874.2.2.72.4.1.1 |
juniTsmMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.72.4.2 |
juniTsmGroupA collection of objects providing management of TSM functionality in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.72.4.2.1 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module