Juniper-PPP-CONF
The agent capabilities definitions for the point-to-point protocol (PPP) component of the SNMP agent in the Juniper E-series family of products.
Main OID:
juniPppAgent.1.3.6.1.4.1.4874.5.2.32
23
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
juniPppAgentThe agent capabilities definitions for the point-to-point protocol (PPP) component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.32 |
juniPppAgentV1The MIBs supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when the multilink capabilities were separated out.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.1 |
juniPppGeneralAgentThe registration group of agent capabilities for the general functionality of the PPP application which provides management support for basic (non-multi-link) PPP interfaces via SNMP. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.32.2 |
juniPppGeneralAgentV1The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new LCP and IP objects were added to the Juniper-PPP-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.2.1 |
juniPppGeneralAgentV2The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new LCP objects were added to the Juniper-PPP-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.2.2 |
juniPppGeneralAgentV3The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when IPv6 support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.2.3 |
juniPppGeneralAgentV4The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.2.4 |
juniPppGeneralAgentV5The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.2.5 |
juniPppGeneralAgentV6The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.2.6 |
juniPppGeneralAgentV7The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.2.7 |
juniPppGeneralAgentV8The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe.These capabilities became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.2.8 |
juniPppGeneralAgentV9The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.32.2.9 |
juniPppMultiLinkAgentThe registration group of agent capabilities for the multi-link functionality of the PPP application which provides management support for multi-link PPP interfaces via SNMP. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.32.3 |
juniPppMultiLinkAgentV1The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.1 |
juniPppMultiLinkAgentV2The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIBobsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.2 |
juniPppMultiLinkAgentV3The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIBobsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.3 |
juniPppMultiLinkAgentV4The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when IPv6 support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.4 |
juniPppMultiLinkAgentV5The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.5 |
juniPppMultiLinkAgentV6The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.6 |
juniPppMultiLinkAgentV7The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.7 |
juniPppMultiLinkAgentV8The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.8 |
juniPppMultiLinkAgentV9The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.32.3.9 |
juniPppMultiLinkAgentV10The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.32.3.10 |
More MIBs from Unisphere
Browse all UnisphereMIBs →Juniper-BGP-MIB
SNMP MIB module
673 objects→
Unisphere-Data-BGP-MIB
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
466 objects→
Juniper-RADIUS-CLIENT-MIB
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
397 objects→
Juniper-UNI-ATM-MIB
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
380 objects→
Juniper-AAA-MIB
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
362 objects→
Juniper-POLICY-MIB
SNMP MIB module
348 objects→