Juniper-SONET-CONF
The Juniper-SONET-CONF MIB module defines agent capabilities for monitoring and managing SONET physical layer components, including interface status, signal integrity, and error counters, on Juniper E-series routers. It enables SNMP-based retrieval of configuration parameters and operational state data specific to Synchronous Optical Networking interfaces within the Juniper E-series platform.
Imported Objects
Objects
13 total| Object Name |
|---|
juniSonetAgentThe agent capabilities definitions for the SONET component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.40 |
juniSonetAgentV1The MIBs supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when support for the standard VT group was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.40.1 |
juniSonetAgentV2The MIBs supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when support for the proprietary path and VT groups were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.40.2 |
juniSonetAgentV3The MIBs supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when support for the RFC-2558 version of the SONET-MIB and far-end statistics were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.40.3 |
juniSonetAgentV4The MIBs supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when Virtual Tributary (VT) support was searated out into a separate capabilities statement.obsolete Unknown .1.3.6.1.4.1.4874.5.2.40.4 |
juniSonetBasicAgent OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.40.5 |
juniSonetBasicAgentV1The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when support was added for the Internet draft of the APS MIB.obsolete Unknown .1.3.6.1.4.1.4874.5.2.40.5.1 |
juniSonetBasicAgentV2The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when new medium and path controls were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.40.5.2 |
juniSonetBasicAgentV3The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe. These capabilities became obsolete when path event status and notification support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.40.5.3 |
juniSonetBasicAgentV4The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.40.5.4 |
juniSonetBasicAgentV5The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.40.5.5 |
juniSonetVTAgent OBJECT IDENTIFIER .1.3.6.1.4.1.4874.5.2.40.6 |
juniSonetVTAgentV1The MIB conformance groups supported by the SNMP agent for the SONET application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.40.6.1 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module