Juniper-PPP-PROFILE-MIB
The Point-to-Point Protocol (PPP) Profile MIB for the Juniper Netowrks enterprise. This MIB provides configuration parameters that extend the tables found in the Juniper-PROFILE-MIB to support profiles for PPP interfaces.
Main OID:
juniPppProfileMIB.1.3.6.1.4.1.4874.2.2.45
68
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
juniPppProfileMIBThe Point-to-Point Protocol (PPP) Profile MIB for the Juniper Netowrks enterprise. This MIB provides configuration parameters that extend the tables found in the Juniper-PROFILE-MIB to support profiles for PPP interfaces. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.45 |
juniPppProfileObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.45.1 |
juniPppProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.45.1.1 |
juniPppProfileTableThis table contains profiles for configuring PPP interfaces. Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB. SEQUENCE OF JuniPppProfileEntry .1.3.6.1.4.1.4874.2.2.45.1.1.1 |
juniPppProfileEntryA profile describing configuration of a PPP interface. JuniPppProfileEntry .1.3.6.1.4.1.4874.2.2.45.1.1.1.1 |
juniPppProfileIdThe integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the Juniper-PROFILE-MIB.juniProfileNameTable. Unsigned32 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.1 |
juniPppProfileSetMapA bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring JuniSetMap.rw JuniSetMap (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.2 |
juniPppProfileLcpMagicNumberIf true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification.rw Enumeration .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3 |
juniPppProfileLcpKeepaliveKeepalive interval in seconds. A value of zero disables keepalive. Keepalive is performed using LCP Echo.rw Integer32 (0|30..64800) UNITS "seconds" .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4 |
juniPppProfileLcpAuthenticationSpecifies the type(s) of authentication, if any, to be negotiated with the peer: none No authentication is negotiated. pap PAP negotiation only. chap CHAP negotiation only. papChap PAP negotiation is attempted first; if fails, attempt CHAP. chapPap CHAP negotiation is attempted first; if fails, attempt PAP. Setting this object to none will set the juniPppProfileAuthenticatorVirtualRouter object to an empty string. This object returns a none value on the get operation. New object juniPppProfileLcpAuthentication2 will reflect the configured values. Setting this object along with the juniPppProfileLcpAuthentication2 object will return an inconsistentValue error.rwdeprecated JuniPppAuthentication (Juniper-PPP-MIB) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.5 |
juniPppProfileIpPeerDnsPriorityWhen enabled, allows peer's DNS address to prevail in the event of a negotiation conflict; when disabled, the local PPP interface's DNS address prevails.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.6 |
juniPppProfileIpPeerWinsPriorityWhen enabled, allows peer's WINS address to prevail in the event of a negotiation conflict; when disabled, the local PPP interface's WINS address prevails.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.7 |
juniPppProfileLcpInitialMRUThe initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 1 then the local PPP entity will advertise an MRU value determined by its underlying media interface.rw Integer32 (1|64..65535) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8 |
juniPppProfilePacketLogWhen enabled, allows packet logging on dynamic PPP interfaces.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.9 |
juniPppProfileStateLogWhen enabled, allows state machine logging on dynamic PPP interfaces.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.10 |
juniPppProfileChapMinChallengeLengthMinimum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value greater than juniPppProfileChapMaxChallengeLength.rw Integer32 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.11 |
juniPppProfileChapMaxChallengeLengthMaximum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value less than juniPppLinkConfigChapMinChallengeLength.rw Integer32 .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.12 |
juniPppProfilePassiveModeWhen enabled, LCP state machine is forced into passive mode on lower layer UP message. It adds compatibility with slow and buggy clients.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13 |
juniPppProfileMlpppEnables the creation of dynamic multi-link PPP interfaces.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.14 |
juniPppProfileIpcpNetmaskEnables the negotiation of the IPCP option netmask (0x90) during IPCP negotiation.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.15 |
juniPppProfileAuthenticatorVirtualRouterThe name of the virtual router (Juniper-ROUTER-MIB.juniRouterName) to be used for authentication on the PPP interface. Setting this object statically binds the authenticating virtual router with the PPP interface. If this object is not explicitly set or it is set to null string, then this object is ignored and the virtual router used for authentication is determined by other means. On a Set operation, if the value of this object is not null and does not correspond to an existing virtual router, then an inconsistentValue error is returned. Setting this object to non null string returns inconsistentValue value error if juniPppProfileConfigAuthentication object is none or not configured.rw JuniName (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.16 |
juniPppProfileAaaProfileThe name of the AAA profile to be used for authentication on the PPP interface. Setting this object statically binds the aaa profile with the PPP interface. If this object is not explicitly set or it is set to null string, then this object is ignored. On a Set operation, if the value of this object is not null and does not correspond to an existing AAA profile, then an inconsistentValue error is returned.rw JuniName (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.17 |
juniPppProfileInitiateIpIf enabled, PPP interface will initiate negotiation of IPCP; if disabled, PPP interface will rely on remote PPP client to initiate negotiation of IPCP.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.18 |
juniPppProfileInitiateIpv6If enabled, PPP interface will initiate negotiation of IPv6CP; if disabled, PPP interface will rely on remote PPP client to initiate negotiation of IPv6CP.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.19 |
juniPppProfileFragmentationEnables MLPPP fragmentation.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.20 |
juniPppProfileReassemblyEnables MLPPP reassembly.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.21 |
juniPppProfileMaxReceiveReconstructedUnitThe Maximum Received Reconstructed Unit (MRRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 1, then the MRRU is set to the local MRU value.rw Integer32 (1|64..65535) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.22 |
juniPppProfileFragmentSizeThe size of fragments transmitted by the local PPP entity. If the value of this variable is 1, then the fragment size is set to the link's MTU value.rw Integer32 (1|128..65535) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.23 |
juniPppProfileHashLinkSelectionEnables MLPPP hash-based link selection for non-best-effort data.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.24 |
juniPppProfileLcpAuthentication2A configuration variable comprised of nibbles i.e. 4 bits, such that a client can supply a list of 0 to 8 selections. The least significant nibble is the first value of the list, and the most significant nibble is the last value. The value in each field ranges from 0 to 15, however the first nibble with value 0 indicates the end of the list. Repetition of values is not allowed. Segregation of values is not allowed. Valid Values are: none - 0 pap - 1 chap - 2 eap - 3 Example valid encoding: 0x00000321 0x00000012 Not a valid encoding: 0x00000121 0x01002001 If authentication negotiation is not supported for this PPP interface, then any attempt to explicitly set this object will result in a notWritable error and it will be implicitly set to the DEFVAL on row creation. Setting this object to null will set juniPppProfileAuthenticatorVirtualRouter object to an empty string. Setting this object along with the juniPppProfileLcpAuthentication object will return an inconsistentValue error.rw JuniNibbleConfig (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.25 |
juniPppProfileIgnoreMagicNumberMismatchThe ignore magic number mismatch option of the PPP interface determines the action to be taken, when the peer has not negotiated any value yet sent null or invalid magic number in the LCP echo packets. The two actions that can be configured are: 1) Ignore the mismatch and retain connection 2) Disallow the mismatch and terminate connectionrw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.26 |
juniPppProfileIpcpPromptDnsOptionControl prompting of IPCP options to remote peer.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.27 |
juniPppProfileIpcpLockoutThe lockout option for IPCP determines whether IPCP can be negotiated when the interface is already running IPV6CP. On enabling this option, the negotiation will be blocked after the IPV6CP service is up and waited for 10 seconds for peer IPCP initiation. The address is restored to the pool after the 10 second timeout. Disabling this option will re enable simultaneous NCP negotiations that are configured.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.28 |
juniPppProfileMultilinkMulticlassEnables Multiclass Multilink PPP (MCML). Changing this object has an effect when the link is next restarted.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.29 |
juniPppProfileMultilinkMaxMultiClassesMaximum number of MCML classes to be negotiated. Changing this object has an effect when the link is next restarted.rw INTEGER .1.3.6.1.4.1.4874.2.2.45.1.1.1.1.30 |
juniPppProfileMulticlassTraffiClassTableThis table contains entries for MLPPP Multiclass to traffic class mapping of the profile present in the system. SEQUENCE OF JuniPppProfileMulticlassTrafficClassEntry .1.3.6.1.4.1.4874.2.2.45.1.1.2 |
juniPppProfileMulticlassTrafficClassEntryEach entry describes the MLPPP multiclass to traffic class mapping of profiles.Other characteristics like fragmentation and reassembly for a particular traffic class can be configured. JuniPppProfileMulticlassTrafficClassEntry .1.3.6.1.4.1.4874.2.2.45.1.1.2.1 |
juniPppProfileMulticlassIdThe index of the profile. When creating entries in this table, suitable values for this object are determined by reading juniPppProfileId. Unsigned32 .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.1 |
juniPppProfileMulticlassIndexThe multiclass index of a particular traffic class type. This can be configured only when MCMP is enabled in the profile. INTEGER .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.2 |
juniPppProfileMulticlassTcNameThe traffic class index mapped to the MCMP multiclass index. This can be configured only when MCMP is enabled in the profile.rw JuniPppProfileMulticlassTcName .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.3 |
juniPppProfileMulticlassFragmentationEnable or disable fragmentation for a particular multiclass. This can be configured only when MCMP is enaled in the profile.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.4 |
juniPppProfileMulticlassReassemblyEnable or disable rassembly for a particular multiclass. This can be configured only when MCMP is enaled in the profile.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.45.1.1.2.1.5 |
juniPppProfileConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.45.4 |
juniPppProfileCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.45.4.1 |
juniPppProfileComplianceObsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when support was added for multi-link PPP interfaces.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.1 |
juniPppProfileCompliance2Obsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when support was added for negotiation of IPCP option netmask.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.2 |
juniPppProfileCompliance3Obsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when the juniPppProfileAuthenticatorVirtualRouter object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.3 |
juniPppProfileCompliance4Obsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when the juniPppProfileAaaProfile object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.4 |
juniPppProfileCompliance5Obsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when the juniPppProfileInitiateIp and juniPppProfileInitiateIpv6 objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.5 |
juniPppProfileCompliance6Obsolete compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when fragmentation and reassembly support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.6 |
juniPppProfileCompliance7The compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when object juniPppProfileHashLinkSelection was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.7 |
juniPppProfileCompliance8The compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when object juniPppProfileLcpAuthentication2 was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.8 |
juniPppProfileCompliance9The compliance statement for entities which implement the Juniper PPP Profile MIB. This statement became obsolete when object juniPppProfileIpcpDnsOption and juniPppProfileIpcpLockout was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.9 |
juniPppProfileCompliance10The compliance statement for entities which implement the Juniper PPP Profile MIB. Unknown .1.3.6.1.4.1.4874.2.2.45.4.1.10 |
juniPppProfileGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.45.4.2 |
juniPppProfileGroupObsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when support was added for MLPPP.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.1 |
juniPppProfileGroup2Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when support was added for negotiation of IPCP option netmask.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.2 |
juniPppProfileGroup3Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when the juniPppProfileAuthenticatorVirtualRouter object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.3 |
juniPppProfileGroup4Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when the juniPppProfileAaaProfile object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.4 |
juniPppProfileGroup5Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when the juniPppProfileInitiateIp and juniPppProfileInitiateIpv6 objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.5 |
juniPppProfileGroup6Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when support was added for fragmentation and reassembly.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.6 |
juniPppProfileGroup7Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when support was added for mlppp hash-based link selection.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.7 |
juniPppProfileGroup8Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when juniPppProfileLcpAuthentication2 was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.8 |
juniPppProfileGroup9Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when juniPppProfileIgnoreMagicNumberMismatch was addedobsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.9 |
juniPppProfileGroup10A collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This group became obsolete when juniPppProfileIpcpDnsOption and juniPppProfileIpcpLockout was addedobsolete Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.10 |
juniPppProfileGroup11Obsolete collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. This was obsoleted when the support for multiclass MLPPP was added. Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.11 |
juniPppProfileGroup12A collection of objects providing management of profile functionality for PPP interfaces in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.12 |
juniPppProfileMulticlassTrafficClassGroup1A collection of object providing management of multiclass MLPPP multiclass to traffic class mapping functionality in the PPP profile in a Juniper product. Unknown .1.3.6.1.4.1.4874.2.2.45.4.2.13 |