L2TV1-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
171
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
171 total| Object Name |
|---|
ibmIROCroutingl2t OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7 |
RFC-1215 Unknown .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7 |
l2tTunnelStartThis TRAP is generated when a Layer-2 Tunnel
is created. TRAP-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.0.1 |
l2tTunnelStopThis TRAP is generated when a Layer-2 Tunnel
ends. TRAP-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.0.2 |
l2tAuthFailTunnelThis TRAP is generated when a Layer-2 Tunnel
is NOT created due to an authentication failure. TRAP-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.0.3 |
l2tAuthFailUserThis TRAP is generated when a Session for a
Layer-2 Tunnel is NOT created due to an
authentication failure. TRAP-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.0.4 |
l2tScalar OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1 |
l2tScalarConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1 |
l2tAdminStateThis object defines the administrative state of
the L2T protocol stack.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.1 |
l2tAuthenticateIncomingTunnelSetupRequestsDefines whether the L2T protocol stack will REQUIRE the
CHAP-like authentication mechanism to be present in all
tunnel setup requests.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.2 |
l2tTunnelDataFlowControlThis object determines whether or not L2T is
to use flow control on the tunneled data packets.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.3 |
l2tControlRecvPacketWindowThis object defines the Control Channel receive window
size which is transmitted to the L2T peers.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.4 |
l2tDataRecvPacketWindowThis object defines the Data Channel receive window
size which is transmitted to the L2T peers.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.5 |
l2tHelloTimerThis object defines the length of the inactivity timer
in seconds which causes the L2T stack to transmit a
keep-alive packet (known as a Hello packet).ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.6 |
l2tControlRetransmissionsThis object defines the number of retransmissions
which the L2T stack will attempt before assuming that
the peer is no longer reachable. The default value for
this object is zero (0) which results in the L2T stack
not doing retransmissions.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.7 |
l2tSecurityExtensionsThis object defines whether the L2T protocol stack will
require the L2T Security for all incoming tunnel setup
requests.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.8 |
l2tHistoryWindowSizeThe window size of the L2T Tunnel History Table
(l2tHistTunnelTable) and the L2T Session History Table
(l2tHistSessTable).
When retrieved by an SNMP GET or GET-NEXT request, this
number specifies the maximum number of entries which
will be maintained in each of these tables.
When modified by an SNMP SET request, the device will
set the value of this object as close as possible to
the requested value based on implementation and
available resources.rw INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.9 |
l2tAuthFailWindowSizeThe window size of the L2T Tunnel Authentication Failure Table
(l2tAuthFailTunnelTable) and the L2T User Authentication Failure
Table (l2tAuthFailUserTable).
When retrieved by an SNMP GET or GET-NEXT request, this
number specifies the maximum number of entries which
will be maintained in each of these tables.
When modified by an SNMP SET request, the device will
set the value of this object as close as possible to
the requested value based on implementation and
available resources.rw INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.1.10 |
l2tScalarStat OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.2 |
l2tMibVersionThe level of the IBM L2T MIB.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.2.1 |
l2tProtocolVersionThis object describes the protocol version and revision
of the L2T protocol stack. The first octet contains the
protocol version. The second octet contains the protocol
revision.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.2.2 |
l2tNumActiveTunnelsThis object returns the number of L2T tunnels
that are mandatory active.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.2.3 |
l2tStatsNumActiveSessionsThis object returns the number of L2T sessions
that are mandatory active.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.1.2.4 |
l2tStats OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2 |
l2tTunnelStatsTableThe L2T tunnel status and statistics table. SEQUENCE OF L2tTunnelStatsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1 |
l2tTunnelStatsEntryAn L2T tunnel interface stats entry. L2tTunnelStatsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1 |
l2tTunnelLocalTunnelControlIdThis object contains the local tunnel Identifier.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.1 |
l2tTunnelPeerTunnelControlIdThis object contains the remote tunnel Identifier.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.2 |
l2tTunnelControlStateThis field contains the mandatory state of
the control tunnel.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.3 |
l2tTunnelLocalInitConnectionThis object indicates whether the tunnel was
generated locally or not. When this object
returns a value of true(1) the tunnel was
locally generated.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.4 |
l2tTunnelLocalRecvPktWindowThis object contains the local receive window size.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.5 |
l2tTunnelRemoteRecvPktWindowThis object contains the remote receive window size.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.6 |
l2tTunnelCtlTunnelFlwCtlTimeoutsThis object contains the number of timeouts due to
flow control.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.7 |
l2tTunnelRemoteHostNameThis object contains the host name of the L2T peer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.8 |
l2tTunnelNextSendSeqThis object contains the next send sequence number for
the control channel.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.9 |
l2tTunnelNextRecvSeqThis object contains the next receive sequence number
for the control channel.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.10 |
l2tTunnelRemoteVendorNameThis object identifies the vendor name of the
peer's L2T implementation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.11 |
l2tTunnelRemoteFirmwareRevisionThis object contains the L2T peer's firmware
revision number.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.12 |
l2tTunnelRemoteProtocolVersionThis object describes the protocol version and revision
of the L2T protocol stack. The first octet contains the
protocol version. The second octet contains the protocol
revision.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.13 |
l2tTunnelActiveSessionsThis object contains the total number of
sessions in use for this tunnel.ro Gauge .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.14 |
l2tTunnelPrevSessionsThe total number of previously actively sessions
which used this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.15 |
l2tTunnelUpTimeThe length of time the tunnel has been active in
hundredths of seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.16 |
l2tTunnelTypeThe type of Layer-2 Tunnel. Possible values are:
1 = Layer-2 Tunnel Protocol Tunnel,
2 = Layer-2 Forwarding Tunnel,
3 = Point-to-Point Tunnel Protocol Tunnel.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.17 |
l2tTunnelInOctetsThe number of octets received by this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.18 |
l2tTunnelInPktsThe number of packets received by this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.19 |
l2tTunnelInDiscardsThe number of packets which were discarded during
receive processing.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.20 |
l2tTunnelOutOctetsThe number of octets sent by this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.21 |
l2tTunnelOutPktsThe number of packets sent by this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.22 |
l2tTunnelOutDiscardsThe number of packets which were discarded during
send processing.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.23 |
l2tTunnelStatusThe status of the MIB table row. This object
can be used to bring the tunnel down by setting
value of this object to destroy(2).
This object cannot be used to create a MIB table row.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.1.1.24 |
l2tSessionStatsTableThe L2T session status and statistics table. SEQUENCE OF L2tSessionStatsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2 |
l2tSessionStatsEntryAn L2T session interface stats entry. L2tSessionStatsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1 |
l2tSessionLocalControlTunnelIdThis object contains the control Channel Tunnel
identifier for this session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.1 |
l2tSessionLocalCallIdThis object contains the local call identifier
for the session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.2 |
l2tSessionRemoteCallIdThis object contains the remote call identifier
for the session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.3 |
l2tSessionPeerNameThis object identifies the peer session name on this
interface. This is typically the login name of the
remote user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.4 |
l2tSessionLineStateThis object contains the current state of the
session.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.5 |
l2tSessionCallDeviceNumberThe internal interface number used for the session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.6 |
l2tSessionCallSerialNumberThis object contains the serial number that applies
to the session.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.7 |
l2tSessionConnectBpsThis object returns the baud rate which this session
was established at.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.8 |
l2tSessionCallBearerTypeThis object returns the bearer type that applies to
this session.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.9 |
l2tSessionFramingTypeThis object returns the framing type used for this
session.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.10 |
l2tSessionLocalRecvPacketWindowThis object returns the local receive window size for
this session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.11 |
l2tSessionRemoteRecvPacketWindowThis object returns the remote receive window size for
this session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.12 |
l2tSessionDataRecvOctetsThe number of octets received on the data tunnel for
this session. This value is accumulated BEFORE
determining whether or not the packet should be
uncompressed.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.13 |
l2tSessionDataRecvDecompOctetsThe number of uncompressed octets received on the
data tunnel for this session. This value is
accumulated AFTER the packet is uncompressed.
If compression is not in use, this value will
match the value of l2tSessionDataRecvOctets.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.14 |
l2tSessionDataRecvPacketsThe number packets received on the data tunnel for
this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.15 |
l2tSessionDataRecvDiscardsThe number packets which were discarded during
the data tunnels receive processing for this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.16 |
l2tSessionDataSendOctetsThe number of octets sent on the data tunnel for
this session. This value is accumulated AFTER
the packet was compressed. If compression is
not in use, this value will match the value
of l2tSessionDataRecvUncompOctets.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.17 |
l2tSessionDataSendUncompOctetsThe number of uncompressed octets sent on the
data tunnel for this session. This value is
is accumulated BEFORE determining whether or
not the packet should be compressed.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.18 |
l2tSessionDataSendPacketsThe number packets sent on the data tunnel for
this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.19 |
l2tSessionDataSendDiscardsThe number packets which were discarded during
the data tunnels send processing for this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.20 |
l2tSessionDataFlowControlTimeoutsThis object returns the total number of flow
control time-outs seen on the data Tunnel for
this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.21 |
l2tSessionNextSendSeqThis object contains the next send sequence number for
for this session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.22 |
l2tSessionNextRecvSeqThis object contains the next receive sequence number
for this session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.23 |
l2tSessionRemotePPDThis object contains the Packet Processing Delay
for the session.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.24 |
l2tSessionAuthMethodThis object contains the proxy authentication method
employed by the LAC for the session.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.25 |
l2tSessionEncryptDecryptThis object reflects whether or not the encryption and
and decryption is being performed for the session.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.26 |
l2tSessionUpTimeThe length of time the session has been active in
hundredths of seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.27 |
l2tSessionStatusThe status of the MIB table row. This object
can be used to bring the session down by setting
value of this object to destroy(2).
This object cannot be used to create a MIB table row.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.2.2.1.28 |
l2tUdp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3 |
l2tUdpConfigTableThe L2T session configuration table. SEQUENCE OF L2tUdpConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.1 |
l2tUdpConfigEntryAn L2T session interface configuration entry. L2tUdpConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.1.1 |
l2tUdpPeerAddressThis object is used to configure the remote tunnel
endpoints IP address.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.1.1.1 |
l2tUdpPeerPortThis object is used to configure the remote tunnel
endpoints UDP port.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.1.1.2 |
l2tUdpStatsTableThe L2T session configuration table. SEQUENCE OF L2tUdpStatsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.2 |
l2tUdpStatsEntryAn L2T session interface configuration entry. L2tUdpStatsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.2.1 |
l2tUdpPeerIpAddressThe peer IP Address of the tunnel.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.2.1.1 |
l2tUdpLocalIpAddressThe local IP Address of the tunnel.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.2.1.2 |
l2tUdpSrcPortThe peer port of tunnel.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.2.1.3 |
l2tUdpDstPortThe local port of tunnel.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.3.2.1.4 |
l2tAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4 |
l2tAuthStats OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.1 |
l2tAuthTunnelSuccessesThe number of successful tunnel authentications performed.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.1.1 |
l2tAuthTunnelFailuresThe number of tunnel authentications which failed.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.1.2 |
l2tAuthUserSuccessesThe number of successful user authentications performed.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.1.3 |
l2tAuthUserFailuresThe number of user authentications which failed.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.1.4 |
l2tAuthFailures OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2 |
l2tAuthFailTunnelTableThe L2T tunnel authentication failure table. SEQUENCE OF L2tAuthFailTunnelEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.1 |
l2tAuthFailTunnelEntryAn L2T tunnel authentication failure entry. L2tAuthFailTunnelEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.1.1 |
l2tAuthFailTunnelIndexThe index of the tunnel authentication failure
table. The value of the index is a number which
begins at one and is incremented with each tunnel
authentication failure. It will wrap at 65535.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.1.1.1 |
l2tAuthFailTunnelHostNameThe host name used on the failed tunnel
authentication attempt.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.1.1.2 |
l2tAuthFailTunnelIpAddressThe IP address associated with the failed
tunnel authentication attempt.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.1.1.3 |
l2tAuthFailTunnelTimeThe time of the failure in hundredths of seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.1.1.4 |
l2tAuthFailUserTableThe L2T user authentication failure table. SEQUENCE OF L2tAuthFailUserEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.2 |
l2tAuthFailUserEntryAn L2T user authentication failure entry. L2tAuthFailUserEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.2.1 |
l2tAuthFailUserIndexThe index of the user authentication failure
table. The value of the index is a number which
begins at one and is incremented with each user
authentication failure. It will wrap at 65535.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.2.1.1 |
l2tAuthFailUserIdThe user name used on the failed
authentication attempt.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.2.1.2 |
l2tAuthFailUserTimeThe time of the failure in hundredths of seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.4.2.2.1.3 |
l2tHistory OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5 |
l2tHistTunnelTableThe L2T tunnel history table. SEQUENCE OF L2tHistTunnelEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1 |
l2tHistTunnelEntryAn L2T tunnel history entry. L2tHistTunnelEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1 |
l2tHistTunnelIndexThe index of the tunnel history table.
The value of the index is a number which
begins at one and is incremented with each tunnel
that ends. The value of this object will wrap at 65535.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.1 |
l2tHistTunnelTunnelIndexThe value which was used as the tunnel stats table
index.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.2 |
l2tHistTunnelRemoteHostNameThe remote host name which was used for this
previous tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.3 |
l2tHistTunnelRemoteIpAddressThe remote IP address which was used for this
previous tunnel.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.4 |
l2tHistTunnelRemotePortThe remote UDP port which was used for this
previous tunnel.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.5 |
l2tHistTunnelLocalIpAddressThe local IP address which was used for this
previous tunnel.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.6 |
l2tHistTunnelLocalPortThe local UDP port which was used for this
previous tunnel.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.7 |
l2tHistTunnelUpTimeThe length of time the tunnel was active in
hundredths of seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.8 |
l2tHistTunnelTotalSessionsThe total number of sessions which used this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.9 |
l2tHistTunnelTypeThe type of Layer-2 Tunnel. Possible values are
1 = Layer-2 Tunnel Protocol Tunnel,
2 = Layer-2 Forwarding Tunnel,
3 = Point-to-Point Tunnel Protocol Tunnel.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.10 |
l2tHistTunnelInOctetsThe number of octets received by this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.11 |
l2tHistTunnelInPktsThe number of packets received by this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.12 |
l2tHistTunnelInDiscardsThe number of packets which were discarded during
receive processing.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.13 |
l2tHistTunnelOutOctetsThe number of octets sent by this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.14 |
l2tHistTunnelOutPktsThe number of packets sent by this tunnel.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.15 |
l2tHistTunnelOutDiscardsThe number of packets which were discarded during
send processing.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.1.1.16 |
l2tHistSessTableThe L2T session history table. SEQUENCE OF L2tHistSessEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2 |
l2tHistSessEntryAn L2T session history entry. L2tHistSessEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1 |
l2tHistSessIndexThe index of the session history table.
The value of the index is a number which
begins at one and is incremented with each tunnel
that ends. The value of this object will wrap at 65535.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.1 |
l2tHistSessTunnelIndexThe value which was used as the tunnel stats table
index.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.2 |
l2tHistSessLocalCallIdThe value which was used as the session stats table
index.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.3 |
l2tHistSessRemoteIpAddressThe remote IP address which was used for this
session.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.4 |
l2tHistSessLocalIpAddressThe local IP address which was used for this
session.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.5 |
l2tHistSessUpTimeThe length of time the session was been active in
hundredths of seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.6 |
l2tHistSessDataRecvOctetsThe number of octets received on the data tunnel for
this session. This value was accumulated BEFORE
determining whether or not the packet should be
uncompressed.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.7 |
l2tHistSessDataRecvPacketsThe number packets received on the data tunnel for
this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.8 |
l2tHistSessDataRecvDiscardsThe number packets which were discarded during
the data tunnels receive processing for this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.9 |
l2tHistSessDataSendOctetsThe number of octets sent on the data tunnel for
this session. This value is accumulated AFTER
the packet was compressed.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.10 |
l2tHistSessDataSendPacketsThe number packets sent on the data tunnel for
this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.11 |
l2tHistSessDataSendDiscardsThe number packets which were discarded during
the data tunnels send processing for this session.ro Counter .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.12 |
l2tHistSessAuthMethodThis object contains the proxy authentication method
which was employed by the LAC for the session.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.13 |
l2tHistSessEncryptDecryptThis object reflects whether or not the encryption and
and decryption is being performed for the session.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.5.2.1.14 |
l2tHosts OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.6 |
l2tHostTableThe L2T host table. SEQUENCE OF L2tHostEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.6.1 |
l2tHostEntryAn L2T host entry. L2tHostEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.6.1.1 |
l2tHostIndexThe index of the host table.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.6.1.1.1 |
l2tHostNameThe host name which may used for a Layer-2 tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.6.1.1.2 |
l2tHostIpAddressThe IP Address associated with the host name.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.6.1.1.3 |
l2tHostTunnelStatusThe current tunnel status of the host.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.6.1.1.4 |
l2tTests OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7 |
l2tTunnelConnectTestTableThe L2T tunnel connectivity test table. SEQUENCE OF L2tTunnelConnectTestEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.1 |
l2tTunnelConnectTestEntryAn L2T tunnel connectivity test entry. L2tTunnelConnectTestEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.1.1 |
l2tTunnelConnectTestIndexThe index of the tunnel connectivity test table.
The value of the index is a number which was used
during row creation.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.1.1.1 |
l2tTunnelConnectTestHostNameThe host name used to establish a Layer-2 tunnel.
This object is used to trigger a connectivity test
to a specific host. A new test is triggered by
SETTING this object using a non-existent index
and SETTING l2tTunnelConnectTestStatus to createAndGo.
For example to trigger a new connectivity test
when the table currently contains row 1 through 4,
one would send a SET as follows:
SNMP SET l2tTunnelConnectHostName.5 = Host-To-Test
l2tTunnelConnectTestStatus.5 = createAndGo
See l2tHostName for the possible host names which
may be specified.
Existing entries may NOT be modified.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.1.1.2 |
l2tTunnelConnectTestResultThe result of the tunnel connectivity test.
1 = test is in progress
2 = test ended successfully
3 = tunnel is already active
4 = host did not respond
5 = local authentication failure
6 = remote authentication failure.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.1.1.3 |
l2tTunnelConnectTestTypeThe type of Layer-2 Tunnel. Possible values are:
1 = Layer-2 Tunnel Protocol Tunnel
2 = Layer-2 Forwarding Tunnel
3 = Point-to-Point Tunnel Protocol Tunnel
99 = no tunnel created.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.1.1.4 |
l2tTunnelConnectTestStatusThe status of the test entry. Possible values are:
1 = active entry
4 = createAndGo
This object is used to trigger a connectivity test
to a specific host. A new test is triggered by
SETTING this object to createAndGo using a non-existent
index and SETTING l2tTunnelConnectTestHostName to a
specific host name. For example to trigger a new
connectivity test when the table currently contains
row 1 through 4, one would send a SET as follows:
SNMP SET l2tTunnelConnectHostName.5 = Host-To-Test
l2tTunnelConnectTestStatus.5 = createAndGo
See l2tHostName for the possible host names which
may be specified.
Existing entries may NOT be modified.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.1.1.5 |
l2tTunnelRspTimeTestTableThe L2T tunnel response time test table. SEQUENCE OF L2tTunnelRspTimeTestEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.2 |
l2tTunnelRspTimeTestEntryAn L2T tunnel response time test entry. L2tTunnelRspTimeTestEntry .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.2.1 |
l2tTunnelRspTimeTestIndexThe index of the tunnel connectivity test table.
The value of the index is a number which was used
during row creation.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.2.1.1 |
l2tTunnelRspTimeTestHostNameThe host name used to test the round-trip response
time of an existing Layer-2 Tunnel.
This object is used to trigger a response time test
of an existing Layer-2 to a specific host. A new test
is triggered by SETTING this object using a non-existent
index and SETTING l2tTunnelRspTimeTestStatus to createAndGo.
For example to trigger a new connectivity test
when the table currently contains row 1 through 4,
one would send a SET as follows:
SNMP SET l2tTunnelRspTimeHostName.5 = Host-To-Test
l2tTunnelRspTimeTestStatus.5 = createAndGo
See l2tHistTunnelRemoteHostName for the possible host
names which may be specified.
Existing entries may NOT be modified.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.2.1.2 |
l2tTunnelRspTimeTestResultThe result of the tunnel connectivity test.
1 = test is in progress
2 = test ended successfully
3 = host did not respond
4 = a tunnel to this host is NOT available.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.2.1.3 |
l2tTunnelRspTimeTestRtripTimeThe round time in milliseconds of response time test.ro INTEGER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.2.1.4 |
l2tTunnelRspTimeTestStatusThe status of the test entry. Possible values are:
1 = active entry
4 = createAndGo
This object is used to trigger a response time test
of an existing Layer-2 to a specific host. A new test
is triggered by SETTING this object using a non-existent
index to createAndGo and SETTING l2tTunnelRspTimeHostName
to a specific host. For example to trigger a new response
time test when the table currently contains row 1 through 4,
one would send a SET as follows:
SNMP SET l2tTunnelRspTimeHostName.5 = Host-To-Test
l2tTunnelRspTimeTestStatus.5 = createAndGo
See l2tHistTunnelRemoteHostName for the possible host
names which may be specified.
Existing entries may NOT be modified.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.7.2.1.5 |
l2tTrapCntl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.8 |
l2tTrapCntlTunnelStartThis object defines the administrative state of sending the L2T
Tunnel Start TRAPrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.8.1 |
l2tTrapCntlTunnelStopThis object defines the administrative state of sending the L2T
Tunnel Stop TRAPrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.8.2 |
l2tTrapCntlAuthFailTunnelThis object defines the administrative state of sending the L2T
Tunnel Authentication Failure TRAPrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.8.3 |
l2tTrapCntlAuthFailUserThis object defines the administrative state of sending the L2T
User Authentication Failure TRAPrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2.2.1.3.6.1.4.1.2.6.6.1.3.6.1.4.1.2.6.119.119.1.3.6.1.4.1.2.6.119.4.4.7.8.4 |