LCOS-SX-MIB
AI MIB Summary
The LCOS-SX-MIB module provides SNMP management definitions for Brocade (now Broadcom) LCOS SX switches, enabling the monitoring of Layer 2 Ethernet switch metrics including port status, traffic counters, error statistics, and spanning tree states.
Management information base definitions
Main OID:
lcosSX.1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14
2448
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
2448 total| Object Name |
|---|
lcosSXManagement information base definitions MODULE-IDENTITY .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14 |
lcsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1 |
lcsSystemInformation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1 |
lcsSystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1 |
lcsSystemInfoModelNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.2 |
lcsSystemInfoSystemDescriptro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.3 |
lcsSystemInfoLocationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.4 |
lcsSystemInfoContactrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.5 |
lcsSystemInfoSystemNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.6 |
lcsSystemInfoSystemDatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.7 |
lcsSystemInfoSystemUptimero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.8 |
lcsSystemInfoBootloaderVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.9 |
lcsSystemInfoFirmwareVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.10 |
lcsSystemInfoHardwareVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.11 |
lcsSystemInfoMechanicalVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.12 |
lcsSystemInfoSeriesNumberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.13 |
lcsSystemInfoHostMACAddressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.14 |
lcsSystemInfoMemoryTotal Memory in RAM(MB)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.15 |
lcsSystemInfoFlashro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.16 |
lcsSystemInfoFanSpeedFan Speedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.17 |
lcsSystemInfoTemperature1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.22 |
lcsSystemInfoTemperature2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.23 |
lcsSystemInfoCPULoadCPU Utilization.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.24 |
lcsSystemInfoProductionDateProduction Date.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.33 |
lcsSystemInfoTemperature3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.34 |
lcsSystemInfoPhysicalPortsNumber of physical Portsro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.200 |
lcsSystemInfoTemperatureSensor1Temperature sensor 1 in degrees Celsiusro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.201 |
lcsSystemInfoTemperatureSensor2Temperature sensor 2 in degrees Celsiusro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.202 |
lcsSystemInfoTemperatureSensor3Temperature sensor 3 in degrees Celsiusro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.203 |
lcsSystemInfoFreeMemoryFree memory in RAM(MB)ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.1.204 |
lcsPowerInformation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2 |
lcsPowerInfoDetectedPSUAIs the power supply unit present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.2 |
lcsPowerInfoDetectedPSUBIs the power supply unit present.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.3 |
lcsPowerInfoPSUStatusAThe status of power supply unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.4 |
lcsPowerInfoPSUStatusBThe status of power supply unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.5 |
lcsPowerInfoFANSpeedAThe fan speed of power supply unit.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.6 |
lcsPowerInfoFANSpeedBThe fan speed of power supply unit.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.7 |
lcsPowerInfoTemperatureAThe temperature of power supply unit.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.8 |
lcsPowerInfoTemperatureBThe temperature of power supply unit.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.9 |
lcsPowerInfoOperatingModeThe operating mode of power supply unit.
0:Boost
1:Redundantrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.1.2.10 |
lcsSystemTimeConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2 |
lcsSystemTime OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2 |
lcsSystemTimeZone OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.1 |
lcsSystemTimeZoneConfGet/Set the NTP Time Zone.
The value range is between -7200 and 7201 (minutes).
0 : None.
-7200 : (GMT-12:00).
-6600 : (GMT-11:00).
-6000 : (GMT-10:00).
-5400 : (GMT-09:00).
-4800 : (GMT-08:00)Pacific Time.
-4801 : (GMT-08:00)Tijuana, Baja California.
-4200 : (GMT-07:00)Arizona.
-4201 : (GMT-07:00)Chihuahua, La Paz, Mazatlan - New.
-4202 : (GMT-07:00)Chihuahua, La Paz, Mazatlan - Old.
-4203 : (GMT-07:00)Mountain Time.
-3600 : (GMT-06:00)Central America.
-3601 : (GMT-06:00)Central Time.
-3602 : (GMT-06:00)Guadalajara, Mexico City, Monterrey - New.
-3603 : (GMT-06:00)Guadalajara, Mexico City, Monterrey - Old.
-3604 : (GMT-06:00)Saskatchewan.
-3000 : (GMT-05:00)Bogota, Lima, Quito, Rio Branco.
-3001 : (GMT-05:00)Eastern Time.
-3002 : (GMT-05:00)Indiana.
-2700 : (GMT-04:30).
-2400 : (GMT-04:00)Atlantic Time.
-2401 : (GMT-04:00)La Paz.
-2402 : (GMT-04:00)Manaus.
-2403 : (GMT-04:00)Santiago.
-2100 : (GMT-03:30).
-1800 : (GMT-03:00)Brasilia.
-1801 : (GMT-03:00)Buenos Aires.
-1802 : (GMT-03:00)Georgetown.
-1803 : (GMT-03:00)Greenland.
-1804 : (GMT-03:00)Montevideo.
-1805 : (GMT-02:00).
-600 : (GMT-01:00)Azores.
-601 : (GMT-01:00)Cape Verde Is.
1 : (GMT) Casablanca.
2 : (GMT) Greenwich Mean Time.
3 : (GMT) Monrovia, Reykjavik.
600 : (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna.
601 : (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague.
602 : (GMT+01:00) Brussels, Copenhagen, Madrid, Paris.
603 : (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb.
604 : (GMT+01:00) West Central Africa.
1200 : (GMT+02:00) Amman.
1201 : (GMT+02:00) Athens, Bucharest, Istanbul.
1202 : (GMT+02:00) Beirut.
1203 : (GMT+02:00) Cairo.
1204 : (GMT+02:00) Harare, Pretoria.
1205 : (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius.
1206 : (GMT+02:00) Jerusalem.
1207 : (GMT+02:00) Minsk.
1208 : (GMT+02:00) Windhoek.
1800 : (GMT+03:00) Baghdad.
1801 : (GMT+03:00) Kuwait, Riyadh.
1802 : (GMT+03:00) Moscow, St. Petersburg, Volgograd.
1803 : (GMT+03:00) Nairobi.
1804 : (GMT+03:00) Tbilisi.
2100 : (GMT+03:30) Tehran.
2400 : (GMT+04:00) Abu Dhabi, Muscat.
2401 : (GMT+04:00) Baku.
2402 : (GMT+04:00) Caucasus Standard Time.
2403 : (GMT+04:00) Port Louis.
2404 : (GMT+04:00) Yerevan.
2700 : (GMT+04:30) Kabul.
3000 : (GMT+05:00) Ekaterinburg.
3001 : (GMT+05:00) Islamabad, Karachi.
3002 : (GMT+05:00) Tashkent.
3300 : (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi.
3301 : (GMT+05:30) Sri Jayawardenepura.
3455 : (GMT+05:45) Kathmandu.
3600 : (GMT+06:00) Almaty, Novosibirsk.
3601 : (GMT+06:00) Astana, Dhaka.
3600 : (GMT+06:30) Yangon (Rangoon).
4200 : (GMT+07:00) Bangkok, Hanoi, Jakarta.
4201 : (GMT+07:00) Krasnoyarsk.
4800 : (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi.
4801 : (GMT+08:00) Irkutsk, Ulaan Bataar.
4802 : (GMT+08:00) Kuala Lumpur, Singapore.
4803 : (GMT+08:00) Perth.
4804 : (GMT+08:00) Taipei.
5400 : (GMT+09:00) Osaka, Sapporo, Tokyo.
5401 : (GMT+09:00) Seoul.
5402 : (GMT+09:00) Yakutsk.
5700 : (GMT+09:30) Adelaide.
5701 : (GMT+09:30) Darwin.
6000 : (GMT+10:00) Brisbane.
6001 : (GMT+10:00) Canberra, Melbourne, Sydney.
6002 : (GMT+10:00) Guam, Port Moresby.
6003 : (GMT+10:00) Hobart.
6004 : (GMT+10:00) Vladivostok.
6600 : (GMT+11:00) Magadan, Solomon Is., New Caledonia.
7200 : (GMT+12:00) Auckland, Wellington.
7201 : (GMT+12:00) Fiji, Kamchatka, Marshall Is.rw Integer32(-7200..7201) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.1.1 |
lcsSystemTimeZoneAcronymAcronym - User can set the acronym of the time zone.
This is a User configurable acronym to identify the time zone.
Range : 0 - 16 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.1.2 |
lcsSystemTimeDaylightSaving OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2 |
lcsSystemTimeDaylightSavingModeThe system Daylight Savings Mode.
disable(0) : Disable.
recurring(1) : Recurring
- configure the Daylight Saving Time duration
to repeat the configuration every year.
nonRecurring(2): Non-Recurring - configure the Daylight Saving Time
duration for single time configuration.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.1 |
lcsSystemTimeDaylightSavingStartWeekStart time Week. Use in Recurring Mode.
Range : first,2,3,4,last.
Default : first.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.2 |
lcsSystemTimeDaylightSavingStartDayStart time Day. Use in Recurring Mode.rw DayOfWeek .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.3 |
lcsSystemTimeDaylightSavingStartMonthStart time Month.rw Month .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.4 |
lcsSystemTimeDaylightSavingStartDateStart time Date. Use in Non-Recurring Mode.
Range : 1 - 31.
Default : 1.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.5 |
lcsSystemTimeDaylightSavingStartYearStart time Year. Use in Non-Recurring Mode.
Range : 2000 - 2097.
Default : 2000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.6 |
lcsSystemTimeDaylightSavingStartHoursStart time Hours.
Range : 0 - 23.
Default : 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.7 |
lcsSystemTimeDaylightSavingStartMinutesStart time Minutes.
Range : 0 - 59.
Default : 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.8 |
lcsSystemTimeDaylightSavingEndWeekEnd time Week. Use in Recurring Mode.
Range : first,2,3,4,last.
Default : first.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.9 |
lcsSystemTimeDaylightSavingEndDayEnd time Day. Use in Recurring Mode.rw DayOfWeek .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.10 |
lcsSystemTimeDaylightSavingEndMonthEnd time Month.rw Month .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.11 |
lcsSystemTimeDaylightSavingEndDateEnd time Date. Use in Non-Recurring Mode.
Range : 1 - 31.
Default : 1.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.12 |
lcsSystemTimeDaylightSavingEndYearEnd time Year. Use in Non-Recurring Mode.
Range : 2000 - 2097.
Default : 2000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.13 |
lcsSystemTimeDaylightSavingEndHoursEnd time Hours.
Range : 0 - 23.
Default : 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.14 |
lcsSystemTimeDaylightSavingEndMinutesEnd time Minutes.
Range : 0 - 59.
Default : 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.15 |
lcsSystemTimeDaylightSavingOffsetOffset - the number of minutes to add during Daylight Saving Time.
Range : 1 - 1440(Minutes).
Default : 1.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.2.16 |
lcsSystemTimeConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.3 |
lcsSystemTimeConfigurationClockSource0:Use Local Settings.
1:Use NTP Server.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.3.1 |
lcsSystemTimeConfigurationSystemDateSystem date. Default format:yyyy-mm-dd.
When ClockSource is Use Local Settings, you can set this field.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.3.2 |
lcsSystemTimeConfigurationDateFormatThe date format of the system.
0:yyyy-mm-dd
1:mm-dd-yyyy
2:dd-mm-yyyyrw Integer32 (0|1|2) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.3.3 |
lcsSystemTimeConfigurationTimeFormatThe time format of the system.
0:24-hr, format:hh:mm:ss
1:12-hr, format:hh:mm:ss am/pmrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.3.4 |
lcsSystemTimeConfigurationSystemTimeSystem date.
24-hr, format:hh:mm:ss
12-hr, format:hh:mm:ss am/pm
When ClockSource is Use Local Settings, you can set this field.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.2.2.3.5 |
lcsSystemAccount OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3 |
lcsSystemAccountUsers OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1 |
lcsUserConfigTableThe User Config Table. SEQUENCE OF LCSUserConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1 |
lcsUserConfigEntryThe User Config Entry. LCSUserConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1.1 |
lcsUserConfigIndexThe user Config Index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1.1.1 |
lcsUserConfigUserNameA string identifying the user name for the entry.
string length: 1-31.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1.1.2 |
lcsUserConfigPasswordThe password of the user.
string length: 0-128.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1.1.3 |
lcsUserConfigPrivilegeLevelThe privilege level of the user.If the privilege level
value is 15, it can access all groups.range: 1-15.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1.1.4 |
lcsUserConfigRowStatusThis object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this
table may be modified while the value of the corresponding
instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1.1.5 |
lcsPrivilegeLevelConfigTableThe Privilege Level Config Table. SEQUENCE OF LCSPrivilegeLevelConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.2 |
lcsPrivilegeLevelConfigEntryThe Privilege Level Config Entry. LCSPrivilegeLevelConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.2.1 |
lcsPrivilegeLevelIndexThe Privilege Level Index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.2.1.1 |
lcsPrivilegeLevelGroupNameThe name identifying the privilege group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.2.1.2 |
lcsPrivilegeLevelConfigReadOnlyThe privilege level of configuration read-only.If the
privilege level value is 15,it can access all groups.
range: 1-15.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.2.1.3 |
lcsPrivilegeLevelConfigReadWriteThe privilege level of configuration/execute read/write.
If the privilege level value is 15,it can access all groups.
range: 1-15.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.2.1.4 |
lcsPrivilegeLevelStatusReadOnlyThe privilege level of status/statistics read-only.
If the privilege level value is 15,it can access all groups.
range: 1-15.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.2.1.5 |
lcsPrivilegeLevelStatusReadWriteThe privilege level of status/statistics read-write.
If the privilege level value is 15,it can access all groups.
range: 1-15.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.2.1.6 |
lcsSystemAccountSuperUserPasswordEncrypted admin passwordrw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1500 |
lcsSystemAccountSuperUserPasswordUnhashedAdmin password
This object will return an empty string even if a password is set.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1501 |
lcsSystemAccountEnforcePasswordRulesEnforce the password policies or not.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.3.1.1502 |
lcsIP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4 |
lcsIPConfigurationBasic OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.1 |
lcsIPConfigIPv4DHCPClientEnableIPv4 DHCP Client Enabled
0: Disable
1: Enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.1.1 |
lcsIPConfigIPv4AddressIPv4 Address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.1.2 |
lcsIPConfigSubnetMaskIPv4 SubnetMask.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.1.3 |
lcsIPConfigGatewayIPv4 Gateway.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.1.4 |
lcsIPConfigDNSServerDNS Server Source.
0: No DNS configuration is applied
1: DNS configuration is manually set
2: DNS configuration is derived from DHCPv4
3: DNS configuration is derived from DHCPv4 on specific VLAN.
4. DNS configuration is derived from DHCPv6.
5. DNS configuration is derived from DHCPv6 on specific VLAN.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.1.5 |
lcsIPConfigDNSServerValueDNS IPv4 Address or VLAN value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.1.6 |
lcsIPConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2 |
lcsModeIP Configuration Mode.
default:0
0: Host
1: Routerrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.2 |
lcsDNSServerSource1DNS Server Source.
0: No DNS configuration is applied
1: DNS configuration is manually set
2: DNS configuration is derived from DHCPv4
3: DNS configuration is derived from DHCPv4 on specific VLAN.
4. DNS configuration is derived from DHCPv6.
5. DNS configuration is derived from DHCPv6 on specific VLAN.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.3 |
lcsDNSServerSource2DNS Server Source.
0: No DNS configuration is applied
1: DNS configuration is manually set
2: DNS configuration is derived from DHCPv4
3: DNS configuration is derived from DHCPv4 on specific VLAN.
4. DNS configuration is derived from DHCPv6.
5. DNS configuration is derived from DHCPv6 on specific VLAN.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.4 |
lcsDNSServerSource3DNS Server Source.
0: No DNS configuration is applied
1: DNS configuration is manually set
2: DNS configuration is derived from DHCPv4
3: DNS configuration is derived from DHCPv4 on specific VLAN.
4: DNS configuration is derived from DHCPv6.
5: DNS configuration is derived from DHCPv6 on specific VLAN.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.5 |
lcsDNSServerSource4DNS Server Source.
0: No DNS configuration is applied
1: DNS configuration is manually set
2: DNS configuration is derived from DHCPv4
3: DNS configuration is derived from DHCPv4 on specific VLAN.
4: DNS configuration is derived from DHCPv6.
5: DNS configuration is derived from DHCPv6 on specific VLAN.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.6 |
lcsDNSServerValue1DNS IPv4/IPv6 Address or VLAN value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.7 |
lcsDNSServerValue2DNS IPv4/IPv6 Address or VLAN value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.8 |
lcsDNSServerValue3DNS IPv4/IPv6 Address or VLAN value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.9 |
lcsDNSServerValue4DNS IPv4/IPv6 Address or VLAN value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.10 |
lcsDNSProxyDNS Proxy enable/disable.
default:0
0: disable
1: enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.2.11 |
lcsIPInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3 |
lcsIPInterfacesTableA table of IP interface for switch. SEQUENCE OF LCSIPInterfacesEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1 |
lcsIPInterfacesEntryAn entry in the lcsIPInterfacesTable. LCSIPInterfacesEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1 |
lcsIPInterfacesIndexinterface table index Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.1 |
lcsIPInterfacesVLANVLAN ID for interface, range: 1-4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.2 |
lcsIPInterfacesIPv4DHCPIPv4 DHCP Setting for interface.
default:0
0: disable
1: enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.3 |
lcsIPInterfacesIPv4DHCPFallbackIPv4 DHCP fallbcak. range: 1-4294967295 seconds.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.4 |
lcsIPInterfacesIPv4DHCPCurrentLeaseIPv4 DHCP Current Lease Address for interface.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.5 |
lcsIPInterfacesIPv4AddressIPv4 address for interface.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.6 |
lcsIPInterfacesIPv4MaskIPv4 mask for interface.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.7 |
lcsIPInterfacesIPv6DHCPIPv6 DHCP Setting for interface.
default:0
0: disable
1: enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.8 |
lcsIPInterfacesIPv6RapidCommitEnable the DHCPv6 Rapid-Commit option.
default:0
0: disable
1: enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.9 |
lcsIPInterfacesIPv6CurrentLeaseIPv6 DHCP Current Lease Address for interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.10 |
lcsIPInterfacesIPv6AddressIPv6 address for interface.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.11 |
lcsIPInterfacesIPv6MaskIPv6 mask for interface.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.12 |
lcsIPInterfacesRowStatusThis object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this
table may be modified while the value of the corresponding
instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.3.1.1.13 |
lcsIPRoutes OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4 |
lcsIPRoutesTableIP routes table for switch. SEQUENCE OF LCSIPRoutesEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4.1 |
lcsIPRoutesEntryEntry in the lcsIPRoutesTable. LCSIPRoutesEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4.1.1 |
lcsIPRoutesIndexroutes table index Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4.1.1.2 |
lcsIPRoutesNetworkIPv4/IPv6 Network address.
Please don't set IPRoutesNetwork to IPv6 and then Set IPRoutesGateway to IPv4, vice versa.
Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry.
If Set IPRoutesNetwork, please also set IPRoutesMaskLength, IPRoutesGateway, IPRoutesNextHopVLAN.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4.1.1.3 |
lcsIPRoutesMaskLengthIPv4/IPv6 mask length.
Please set IPRoutesNetwork first.
Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4.1.1.4 |
lcsIPRoutesGatewayIPv4/IPv6 Gateway.
Please set IPRoutesNetwork first.
Please don't set IPRoutesNetwork to IPv6 and then Set IPRoutesGateway to IPv4, vice versa.
Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4.1.1.5 |
lcsIPRoutesNextHopVLANNext Hop VLAN ID, range: 1-4094.
Please set IPRoutesNetwork first.
This entry only work when 1.network address is IPv6, 2.Gateway is link-local, 3.Interface of specific VLAN ID is IPv6.
Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4.1.1.6 |
lcsIPRoutesRowStatusThis object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this
table may be modified while the value of the corresponding
instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.4.1.1.7 |
lcsIPStatusInterface OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.8 |
lcsIPStatusInterfaceTableThe system IP Status table to show all IP interfaces. SEQUENCE OF LCSIPStatusInterfaceEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.8.1 |
lcsIPStatusInterfaceEntryAn entry in the IP Status Table. LCSIPStatusInterfaceEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.8.1.1 |
lcsIPStatusInterfaceIndexThe entry of table to show all IP interfaces. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.8.1.1.1 |
lcsIPStatusInterfaceNameThe name of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.8.1.1.2 |
lcsIPStatusInterfaceTypeThe address type of the entry. This may be LINK or IPv4.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.8.1.1.3 |
lcsIPStatusInterfaceAddressThe current address of the interface (of the given type).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.8.1.1.4 |
lcsIPStatusInterfaceStatusThe status flags of the interface (and/or address).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.8.1.1.5 |
lcsIPStatusRoute OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.9 |
lcsIPStatusRouteTableThe IP Status Route table show all routing entries. SEQUENCE OF LCSIPStatusRouteEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.9.1 |
lcsIPStatusRouteEntryan entry in the IP Status route table. LCSIPStatusRouteEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.9.1.1 |
lcsIPStatusRouteIndexThe entry of table to show all routing entries. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.9.1.1.1 |
lcsIPStatusRouteNetworkThe destination IP network or host address of this route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.9.1.1.2 |
lcsIPStatusRouteGatewayThe gateway address of this route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.9.1.1.3 |
lcsIPStatusRouteAddressThe route address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.9.1.1.4 |
lcsIPStatusNeighborCache OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.10 |
lcsIPStatusNeighborCacheTableThe Ip Status Neighbor Cache Table. SEQUENCE OF LCSIPStatusNeighborCacheEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.10.1 |
lcsIPStatusNeighborCacheEntryAn entry in the Ip Status Neighbor Cache Table. LCSIPStatusNeighborCacheEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.10.1.1 |
lcsIPStatusNeighborCacheIndexThe index for the Ip Status Neighbor Cache Table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.10.1.1.1 |
lcsIPStatusNeighborCacheIPAddressThe IP address of the entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.10.1.1.2 |
lcsIPStatusNeighborCacheLinkAddressThe Link (MAC) address for which a binding to the
IP address given exist.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.10.1.1.3 |
lcsIPStatusDNSServer OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.11 |
lcsIPStatusDNSServerTypeThe configuration type of DNS server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.11.1 |
lcsIPStatusDNSServerIPAddressThe IP address of the DNS server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.11.2 |
lcsIPStatusDNSServerInterfaceThe name of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.4.11.3 |
lcsSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5 |
lcsSyslogConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.1 |
lcsSystemLogServerModeThe System log server mode admin state.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.1.1 |
lcsSystemLogServerAddressThe Host address of syslog server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.1.2 |
lcsSystemLogServerPortsyslog service port number.
range : 1-65535, default : 514.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.1.4 |
lcsSystemLogIncludeHostnamedefault: 0
0: disable
1: enablerw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.1.150 |
lcsSysLogInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2 |
lcsSystemLogInfoLevelThe Level input field is used to filter the display system log entries.
0: Emergency.
1: Alert.
2: Critical.
3: Error.
4: Warning.
5: Notice.
6: Information.
7: Debug.
8: All.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.1 |
lcsSystemLogInfoClearLevelThe Clear Level input field is used to specify which
system log entries will be cleared.
default: 8 (All).
0: Emergency.
1: Alert.
2: Critical.
3: Error.
4: Warning.
5: Notice.
6: Information.
7: Debug.
8: All.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.2 |
lcsSystemLogInfoClearCmdCommand to clear the syslog.
noAction(0) : do nothing (read only).
activate(1) : Clear Syslog.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.3 |
lcsSystemLogDetailedInfoTableThe system detailed Log Info table. SEQUENCE OF LCSSystemLogDetailedInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.4 |
lcsSystemLogDetailedInfoEntryAn entry in the system detailed Log Info table. LCSSystemLogDetailedInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.4.1 |
lcsSystemLogDetailedSwitchIndexThe switch index for the system detailed Log Info table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.4.1.1 |
lcsSystemLogDetailedInfoIDThe index for the system detailed Log Info table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.4.1.2 |
lcsSystemLogDetailedInfoLevelThe Info Level.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.4.1.3 |
lcsSystemLogDetailedInfoTimeThe timero DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.4.1.4 |
lcsSystemLogDetailedInfoMessageThe message of this entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.5.2.4.1.5 |
lcsSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6 |
lcsSnmpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.1 |
lcsSnmpSystemModeSNMP mode operation.
default : 1, 0: disable, 1: enable.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.1.1 |
lcsSnmpSystemReadCommunityIndicates the community read access string to permit access to SNMP agent.
The allowed string length is 0 to 255.
The field is applicable only when SNMP version is SNMPv1 or SNMPv2c.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.1.3 |
lcsSnmpSystemWriteCommunityIndicates the community write access string to permit access to SNMP agent.
The allowed string length is 0 to 255.
The field is applicable only when SNMP version is SNMPv1 or SNMPv2c.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.1.4 |
lcsSnmpSystemWriteCommunityModeSNMP write community mode operation.
default : 1, 0: disable, 1: enable.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.1.6 |
lcsSnmpSystemReadCommunityModeSNMP read community mode operation.
default : 1, 0: disable, 1: enable.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.1.7 |
lcsTrapDestinationConfTableA list of trap host entry. The numbers of entries are given by the value of TrapHostConfNumber. SEQUENCE OF LCSTrapDestinationConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3 |
lcsTrapDestinationConfEntryThis is the entry information for trap host. LCSTrapDestinationConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1 |
lcsTrapDestinationConfIndexIndex of tarp destination configurations. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.1 |
lcsTrapDestinationConfTrapConfigNameIndicates which trap Configuration's name for configuring.
The allowed string length is 0 to 255, and the allowed content is
ASCII characters from 33 to 126.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.2 |
lcsTrapDestinationConfTrapModeIndicates the SNMP mode operation. Possible modes are:
2: Enable TCP SNMP mode operation.
1: Enable UDP SNMP mode operation.
0: Disable SNMP mode operation.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.3 |
lcsTrapDestinationConfTrapVersion0: snmpv1
1: snmpv2c
3: snmpv3.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.4 |
lcsTrapDestinationConfTrapCommunityIndicates the community access string when sending SNMP trap packet.
The allowed string length is 0 to 255, and the allowed content is
ASCII characters from 33 to 126.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.5 |
lcsTrapDestinationConfTrapDestinationAddresIndicates the SNMP trap destination address.
It allow a valid IP address in dotted decimal notation ('x.y.z.w').
And it also allow a valid hostname.
A valid hostname is a string drawn from the alphabet (A-Za-z), digits (0-9),
dot (.), dash (-). Spaces are not allowed, the first character must be an alpha character,
and the first and last characters must not be a dot or a dash.
Indicates the SNMP trap destination IPv6 address.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits
with a colon separating each field (:).
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax
that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros;
but it can appear only once.
It can also represent a legally valid IPv4 address.
For example, '::192.1.2.34'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.6 |
lcsTrapDestinationConfTrapDestinationPortIndicates the SNMP trap destination port.
SNMP Agent will send SNMP message via this port,
the port range is 1~65535.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.7 |
lcsTrapDestinationConfTrapSecurityEngineIDIndicates the SNMP trap security engine ID.
SNMPv3 sends traps and informs using USM for authentication and privacy.
A unique engine ID for these traps and informs is needed.
When Trap Probe Security Engine ID is enabled, the ID will be probed automatically.
Otherwise, the ID specified in this field is used.
The string must contain an even number(in hexadecimal format) with
number of digits between 10 and 64, but all-zeros and all-'F's are not allowed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.12 |
lcsTrapDestinationConfTrapSecurityNameIndicates the SNMP trap security name.
SNMPv3 traps and informs using USM for authentication and privacy.
A unique security name is needed when traps and informs are enabled.
This name from user name of user configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.13 |
lcsTrapDestinationConfTrapRowStatusThis object indicates the status of this entry, and is
used to create(5)/delete(6) entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.3.1.14 |
lcsSNMPCommunityConfTableA list of snmp community configuration entry. SEQUENCE OF LCSSNMPCommunityConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.5 |
lcsSNMPCommunityConfEntryThis is the entry information for snmp community configuration. LCSSNMPCommunityConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.5.1 |
lcsSNMPCommunityConfIndexCommunity configuration index.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.5.1.1 |
lcsSNMPCommunityConfSNMPv3CommunityIndicates the community access string to permit access to SNMPv3 agent.
The allowed string length is 1 to 32, and the allowed content is
ASCII characters from 33 to 126.
The community string will be treated as security name and map a SNMPv1
or SNMPv2c community string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.5.1.2 |
lcsSNMPCommunityConfSNMPv3SourceIPIndicates the SNMP access source address.
A particular range of source addresses can be used to restrict source subnet
when combined with source mask.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.5.1.3 |
lcsSNMPCommunityConfSNMPv3SourceMaskIndicates the SNMP access source address mask.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.5.1.4 |
lcsSNMPCommunityConfSNMPv3RowStatusThis object indicates the status of this entry, and is
used to create(5)/delete(6) entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.5.1.5 |
lcsSNMPv3UserConfTableA list of snmpv3 user configuration entry. SEQUENCE OF LCSSNMPv3UserConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6 |
lcsSNMPv3UserConfEntryThis is the entry information for snmpv3 user configuration. LCSSNMPv3UserConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1 |
lcsSNMPv3UserConfIndexUser configuration index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.1 |
lcsSNMPv3UserConfEngineIDAn octet string identifying the engine ID that this entry should belong to.
The string must contain an even number(in hexadecimal format) with
number of digits between 10 and 64, but all-zeros and all-'F's are not allowed.
The SNMPv3 architecture uses the User-based Security Model (USM)
for message security and the View-based Access Control Model (VACM) for access control.
For the USM entry, the usmUserEngineID and usmUserName are the entry's keys.
In a simple agent, usmUserEngineID is always that agent's own snmpEngineID value.
The value can also take the value of the snmpEngineID of a remote SNMP engine with
which this user can communicate. In other words, if user engine ID equal system engine ID
then it is local user; otherwise it's remote user.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.2 |
lcsSNMPv3UserConfUserNameA string identifying the user name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed contents are
ASCII characters from 33 to 126.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.3 |
lcsSNMPv3UserConfSecurityLevelSNMPv3 USM security level.rw SNMPv3SecurityLevel .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.4 |
lcsSNMPv3UserConfAuthenticationProtocolSNMPv3 USM authentication protocol.rw SNMPv3AuthenticationProtocol .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.5 |
lcsSNMPv3UserConfAuthenticationPasswordA string identifying the authentication password phrase.
The allowed string length is 8 to 128, and the allowed contents are
ASCII characters from 33 to 126.
Does only read '*****' instead of the password or localized key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.6 |
lcsSNMPv3UserConfPrivacyProtocolSNMPv3 USM privacy protocol.rw SNMPv3PrivacyProtocol .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.7 |
lcsSNMPv3UserConfPrivacyPasswordA string identifying the privacy password phrase.
The allowed string length is 8 to 128, and the allowed contents are
ASCII characters from 33 to 126.
Does only read '*****' instead of the password or localized key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.8 |
lcsSNMPv3UserConfRowStatusThis object indicates the status of this entry, and is
used to create(5)/delete(6) entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.6.1.9 |
lcsSNMPv3GroupConfTableA list of snmpv3 group configuration entry. SEQUENCE OF LCSSNMPv3GroupConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.7 |
lcsSNMPv3GroupConfEntryThis is the entry information for snmpv3 group configuration. LCSSNMPv3GroupConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.7.1 |
lcsSNMPv3GroupConfIndexGroup configuration index.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.7.1.1 |
lcsSNMPv3GroupConfSecurityModel1:v1
2:v2c
3:usmrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.7.1.2 |
lcsSNMPv3GroupConfSecurityNameA string identifying the security name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is
ASCII characters from 33 to 126.
This name is from the Community of Community configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.7.1.3 |
lcsSNMPv3GroupConfGroupNameA string identifying the group name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is
ASCII characters from 33 to 126.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.7.1.4 |
lcsSNMPv3GroupConfRowStatusThis object indicates the status of this entry, and is
used to create(5)/delete(6) entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.7.1.5 |
lcsSNMPv3ViewsConfTableA list of snmpv3 view configuration entry. SEQUENCE OF LCSSNMPv3ViewsConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.8 |
lcsSNMPv3ViewsConfEntryThis is the entry information for snmpv3 view configuration. LCSSNMPv3ViewsConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.8.1 |
lcsSNMPv3ViewsConfIndexview configuration index.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.8.1.1 |
lcsSNMPv3ViewsConfViewNameA string identifying the view name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is
ASCII characters from 33 to 126.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.8.1.2 |
lcsSNMPv3ViewsConfViewType0:included
1:excludedrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.8.1.3 |
lcsSNMPv3ViewsConfOIDSubtreeThe OID defining the root of the subtree to add to the named view.
The allowed OID length is 1 to 128. The allowed string content is
digital number or asterisk(*)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.8.1.4 |
lcsSNMPv3ViewsConfRowStatusThis object indicates the status of this entry, and is
used to create(5)/delete(6) entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.8.1.5 |
lcsSNMPv3AccessConfTableA list of snmpv3 access configuration entry. SEQUENCE OF LCSSNMPv3AccessConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9 |
lcsSNMPv3AccessConfEntryThis is the entry information for snmpv3 access configuration. LCSSNMPv3AccessConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9.1 |
lcsSNMPv3AccessConfIndexAccess configuration indexrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9.1.1 |
lcsSNMPv3AccessConfGroupNameGroup name from Group configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9.1.2 |
lcsSNMPv3AccessConfSecurityModel0:any
1:v1
2:v2c
3:usmrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9.1.3 |
lcsSNMPv3AccessConfSecurityLevelSNMPv3 USM security level.rw SNMPv3SecurityLevel .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9.1.4 |
lcsSNMPv3AccessConfReadViewNameRead View Name from View configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9.1.5 |
lcsSNMPv3AccessConfWriteViewNameWrite View Name from View configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9.1.6 |
lcsSNMPv3AccessConfRowStatusThis object indicates the status of this entry, and is
used to create(5)/delete(6) entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.6.9.1.7 |
lcsDHCPServer OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9 |
lcsDHCPServerConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7 |
lcsDHCPServerConfigTable SEQUENCE OF LCSDHCPServerConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1 |
lcsDHCPServerConfigEntry LCSDHCPServerConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1 |
lcsDHCPServerConfigIndextable index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1.1 |
lcsDHCPServerConfigInterfaceVLANThe VLAN in which DHCP server is enabled or disabled.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1.2 |
lcsDHCPServerConfigInterfaceModeIndicate the operation mode per VLAN.
0:disable
1:enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1.3 |
lcsDHCPServerConfigInterfaceStartIPEndIPPlease set SubnetMask first.
Start IP and End IP. Format: x.x.x.x-x.x.x.xrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1.4 |
lcsDHCPServerConfigInterfaceLeaseTimeThe lease time in second.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1.6 |
lcsDHCPServerConfigInterfaceSubnetMaskConfigure subnet mask of the DHCP address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1.7 |
lcsDHCPServerConfigInterfaceDefaultRouterConfigure the destination IP network or host address of the default route.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1.8 |
lcsDHCPServerConfigInterfaceDNSServerConfigure the default DNS server.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.7.1.1.9 |
lcsDHCPServerStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8 |
lcsDHCPServerStatusTable SEQUENCE OF LCSDHCPServerStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1 |
lcsDHCPServerStatusEntry LCSDHCPServerStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1 |
lcsDHCPServerStatusIndextable index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.1 |
lcsDHCPServerStatusInterfaceVLANThe VLAN in which DHCP server is enabled or disabled.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.2 |
lcsDHCPServerStatusInterfaceTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.3 |
lcsDHCPServerStatusInterfaceStartIPStart IPro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.4 |
lcsDHCPServerStatusInterfaceEndIPEnd IPro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.5 |
lcsDHCPServerStatusInterfaceLeaseTimeThe lease time in second.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.6 |
lcsDHCPServerStatusInterfaceSubnetMaskConfigure subnet mask of the DHCP address.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.7 |
lcsDHCPServerStatusInterfaceDefaultRouterConfigure the destination IP network or host address of the default route.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.8 |
lcsDHCPServerStatusInterfaceDNSServerConfigure the default DNS server.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.9.8.1.1.9 |
lcsVLANConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10 |
lcsVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2 |
lcsVlanExistingVLANsThis field shows the VLANs that are created on the switch.
More VLANs may be created by using a
list syntax where the individual elements are separated by commas.
Ranges are specified with a
dash separating the lower and upper bound.
The following example will create VLANs 1, 10, 11, 12
, 13, 200, and 300: 1,10-13,200,300.
default: 1.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.1 |
lcsVlanEthertypeforCustomSPortsThis field specifies the ethertype/TPID (specified in hexadecimal)
used for Custom S-ports. The
setting is in force for all ports whose Port Type
is set to S-Custom-Port.
range: 0600-ffff,
default: 88a8.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.2 |
lcsVlanTableConfigure Vlan ports Configuration mode.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSVlanEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3 |
lcsVlanEntryThe Vlan entry. LCSVlanEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1 |
lcsVlanModeThe port mode determines the fundamental
behavior of the port in question.
A port can be in one of three modes as described below.
0: access,
1: trunk,
2: hybrid.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1.2 |
lcsVlanPortVLANDetermines the port's VLAN ID (a.k.a. PVID).
range: 1-4094,
default: 1.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1.3 |
lcsVlanPortTypePorts in hybrid mode allow for changing the port type,
that is, whether a frame's VLAN tag is
used to classify the frame on ingress to a particular VLAN,
and if so, which TPID it reacts on.
Likewise, on egress, the Port Type determines the
TPID of the tag, if a tag is required.
0: unaware,
1: c-Port,
2: s-Port,
3: s-Custom-Port.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1.4 |
lcsVlanIngressFilteringHybrid ports allow for changing ingress filtering.
Access and Trunk ports always have ingress
filtering enabled.If ingress filtering is enabled,
frames classified to
a VLAN that the port is not a member of get discarded.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1.5 |
lcsVlanIngressAcceptanceHybrid ports allow for changing the type of frames that are
accepted on ingress.
0: Tagged and Untagged,
1: Tagged Only,
2: Untagged Only.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1.7 |
lcsVlanEgressTaggingPorts in Trunk and Hybrid mode may control the
tagging of frames on egress.
0: Untag Port VLAN,
1: Tag All,
2: Untag All.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1.8 |
lcsVlanAllowedVLANsPorts in Trunk and Hybrid mode may control which
VLANs they are allowed to become members of.
Access ports can only be member of one VLAN, the Access VLAN.
range: 1~4094.
'-': Allowed VLANs is empty.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1.9 |
lcsVlanForbiddenVLANsA port may be configured to never be member of one or
more VLANs. This is particularly useful
when dynamic VLAN protocols like MVRP and GVRP
must be prevented from dynamically adding ports
to VLANs.
range: 1~4094.
'-': Forbidden VLANs is empty.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.3.1.10 |
lcsVlanStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6 |
lcsVLANMembershipStatusTableVlan membership Status table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSVLANMembershipStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.1 |
lcsVLANMembershipStatusEntryVlan membership Status entry. LCSVLANMembershipStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.1.1 |
lcsVLANMembershipVlanIDVLAN ID for which the Port members are displayed. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.1.1.2 |
lcsVLANMembershipStatusportIsNotInVlan(0): A port is nothing in a VLAN.
portIncludedInVlan(1): A port is included in a VLAN.
portInForbiddenPortList(2): A port is in the forbidden port list.
portInForbiddenPortListAndVlan(3):
A port is in the forbidden port list and at the same
time attempted included in the VLAN.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.1.1.3 |
lcsVLANPortStatusTableThe vlan port status table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSVLANPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2 |
lcsVLANPortStatusEntryThe vlan port status entry. LCSVLANPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2.1 |
lcsVLANPortStatusPortTypeShows the port type (Unaware, C-Port, S-Port,
S-Custom-Port.) that a given user wants to configure on
the port.The field is empty if not overridden by the selected user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2.1.2 |
lcsVLANPortStatusIngressFilteringShows whether a given user wants ingress filtering enabled or not.ro AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2.1.3 |
lcsVLANPortStatusFrameTypeShows the acceptable frame types (All, Taged,
Untagged) that a given user wants to configure on the port.
The field is empty if not overridden by the selected user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2.1.4 |
lcsVLANPortStatusPortVLANIDShows the Port VLAN ID (PVID) that a given user
wants the port to have.
The field is 0 if not overridden by the selected user.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2.1.5 |
lcsVLANPortStatusTxTagShows the Tx Tag requirements (Tag All, Tag PVID,
Tag UVID, Untag All, Untag PVID, Untag UVID)
that a given user has on a port.The field is empty
if not overridden by the selected user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2.1.6 |
lcsVLANPortStatusUntaggedVLANIDIf Tx Tag is overridden by the selected user and is
set to Tag or Untag UVID, then this field will show
the VLAN ID the user wants to tag or untag on egress.
The field is 0 if not overridden by the selected
user.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2.1.7 |
lcsVLANPortStatusConflictsTwo users may have conflicting requirements to a port's
configuration. For instance, one user may require
all frames to be tagged on egress while another requires
all frames to be untagged on egress.Since both
users cannot win, this gives rise to a conflict,
which is solved in a prioritized way. The Administrator
has the least priority. Other software modules are
prioritized according to their position in the drop-down
list: The higher in the list, the higher priority.
If conflicts exist, it will be displayed as 'Yes'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.6.2.1.8 |
lcsMacBaesdVlanMembershipConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.7 |
lcsMacBaesdVlanMembershipConfigTableMac-Based VLAN Membership table SEQUENCE OF LCSMacBaesdVlanMembershipConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.7.1 |
lcsMacBaesdVlanMembershipConfigEntryMac-Based VLAN Membership table. LCSMacBaesdVlanMembershipConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.7.1.1 |
lcsMacBaesdVlanMembershipConfigIndexMac-Based VLAN membership index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.7.1.1.1 |
lcsMacBaesdVlanMembershipConfigMACAddressMAC address: xx-xx-xx-xx-xx-xx.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.7.1.1.2 |
lcsMacBaesdVlanMembershipConfigVLANIDVLAN IDrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.7.1.1.3 |
lcsMacBaesdVlanMembershipConfigPortMembers0:remove or exclude the port from the mapping
1:include a port in the mappingrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.7.1.1.4 |
lcsMacBaesdVlanMembershipConfigRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.7.1.1.5 |
lcsMacBaesdVlanMembershipStatusUserMAC-based VLAN Membership Status Userrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.8 |
lcsMacBaesdVlanMembershipStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.9 |
lcsMacBaesdVlanMembershipStatusTableMac-Based VLAN Membership table SEQUENCE OF LCSMacBaesdVlanMembershipStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.9.1 |
lcsMacBaesdVlanMembershipStatusEntryMac-Based VLAN Membership table. LCSMacBaesdVlanMembershipStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.9.1.1 |
lcsMacBaesdVlanMembershipStatusIndexMac-Based VLAN membership index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.9.1.1.1 |
lcsMacBaesdVlanMembershipStatusMACAddressMAC address: xx-xx-xx-xx-xx-xx.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.9.1.1.2 |
lcsMacBaesdVlanMembershipStatusVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.9.1.1.3 |
lcsMacBaesdVlanMembershipStatusPortMembers0:remove or exclude the port from the mapping
1:include a port in the mappingro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.9.1.1.4 |
lcsProtocolbasedVLANConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10 |
lcsProtocolbasedVLANConfigTableProtocol-based VLAN Config table SEQUENCE OF LCSProtocolbasedVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1 |
lcsProtocolbasedVLANConfigEntryProtocol-based VLAN Config table LCSProtocolbasedVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1 |
lcsProtocolbasedVLANConfigIndexProtocol-based VLAN Config index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.1 |
lcsProtocolbasedVLANConfigFrameTypeFrame Type.
1:Ethernet
2:LLC
3:SNAPrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.2 |
lcsProtocolbasedVLANConfigValueEthernetEtypeEthernet Etype.
Valid values for etype range between 0x0600 and 0xffffrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.3 |
lcsProtocolbasedVLANConfigValueSNAPOUISNAP OUI.
Format:xx-xx-xxrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.4 |
lcsProtocolbasedVLANConfigValueSNAPPIDSNAP PID
Ranging between 0x00 and 0xff.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.5 |
lcsProtocolbasedVLANConfigValueLLCDSAPLLC DSAP.
Range: 0x00-0xffrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.6 |
lcsProtocolbasedVLANConfigValueLLCSSAPLLC SSAP.
Range: 0x00-0xffrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.7 |
lcsProtocolbasedVLANConfigGroupNameGroup Name
16-character long string, unique for every entry, which consists of a combination of alphabets (a-z or A-Z) and integers(0-9).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.8 |
lcsProtocolbasedVLANConfigRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.1.1.9 |
lcsGroupNameToVLANMappingConfigTableGroup Name To VLAN Mapping Config table SEQUENCE OF LCSGroupNameToVLANMappingConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.2 |
lcsGroupNameToVLANMappingConfigEntryGroup Name To VLAN Mapping Config table. LCSGroupNameToVLANMappingConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.2.1 |
lcsGroupNameToVLANMappingConfigIndexGroup Name To VLAN Mapping Config index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.2.1.1 |
lcsGroupNameToVLANMappingConfigGroupNameGroup Name
16-character long string, unique for every entry, which consists of a combination of alphabets (a-z or A-Z) and integers(0-9).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.2.1.2 |
lcsGroupNameToVLANMappingConfigVLANIDVLAN IDrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.2.1.3 |
lcsGroupNameToVLANMappingConfigPortMembers0:remove or exclude the port from the mapping
1:include a port in the mappingrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.2.1.4 |
lcsGroupNameToVLANMappingConfigRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.10.2.1.5 |
lcsIPSubnetBasedVLANConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11 |
lcsIPSubnetBasedVLANConfigTableIP Subnet Based VLAN Config table SEQUENCE OF LCSIPSubnetBasedVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11.1 |
lcsIPSubnetBasedVLANConfigEntryIP Subnet Based VLAN Config table. LCSIPSubnetBasedVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11.1.1 |
lcsIPSubnetBasedVLANConfigIndexIP Subnet Based VLAN Config index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11.1.1.1 |
lcsIPSubnetBasedVLANConfigIPAddressThe subnet's IP addressrw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11.1.1.2 |
lcsIPSubnetBasedVLANConfigMaskLengthThe subnet's mask length.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11.1.1.3 |
lcsIPSubnetBasedVLANConfigVLANIDVLAN IDrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11.1.1.4 |
lcsIPSubnetBasedVLANConfigPortMembers0:remove or exclude the port from the mapping
1:include a port in the mappingrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11.1.1.5 |
lcsIPSubnetBasedVLANConfigRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.11.1.1.6 |
lcsVLANNameConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.12 |
lcsVLANNameConfigTableVLAN Name Config table SEQUENCE OF LCSVLANNameConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.12.1 |
lcsVLANNameConfigEntryVLAN Name Config table. LCSVLANNameConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.12.1.1 |
lcsVLANNameConfigIndexVLAN Name Config index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.12.1.1.1 |
lcsVLANNameConfigVLANNameVLAN Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.10.2.12.1.1.2 |
lcsNTPConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.12 |
lcsNTPConfigModeThe system NTP Mode.
useLocal(0) : Use Local Settings,
useNTP(1) : Use NTP Server.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.12.1 |
lcsNTPConfigTimeSyncIntervalTime-Sync Interval.
Valid values are restricted to 5,10,15,30,60,120 minutes.rw Integer32 (5|10|15|30|60|120) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.12.3 |
lcsNTPConfigServerAddress1Provide the IPv4 or IPv6 address of a NTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.12.4 |
lcsNTPConfigServerAddress2Provide the IPv4 or IPv6 address of a NTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.12.5 |
lcsNTPConfigServerAddress3Provide the IPv4 or IPv6 address of a NTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.12.6 |
lcsNTPConfigServerAddress4Provide the IPv4 or IPv6 address of a NTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.12.7 |
lcsNTPConfigServerAddress5Provide the IPv4 or IPv6 address of a NTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.1.12.8 |
lcsConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2 |
lcsPort OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1 |
lcsPortConfigurationTableShow port configurations. SEQUENCE OF LCSPortConfigurationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1 |
lcsPortConfigurationEntry LCSPortConfigurationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1 |
lcsPortConfPortport, range : 1 - port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.1 |
lcsPortConfDescriptionInterface specific description.
Up to 47 characters describing this interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.2 |
lcsPortConfLinkThe current link state.ro DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.3 |
lcsPortConfSpeedStatusThe current link speed of the port.ro DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.4 |
lcsPortConfSpeedMode0: disable state,
1: auto,
2: 10 Half,
3: 10 Full,
4: 100 Half,
5: 100 Full,
6: 1G full,
7: SFP_Auto_AMS,
8: 100FX_AMS,
9: 1000X_AMS,
10: 100-FX,
11: 1000-X,
12: 10G Full,
13: Auto (2.5G/1G),
14: Auto (2.5G/100M),
15: Auto (2.5G),
16: Auto (1G/100M),
17: Auto (1G),
18: Auto (100M),
19: 2.5G Full.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.5 |
lcsPortConfFlowControlRxStatus0: disable
1: enable
2: not support.ro Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.6 |
lcsPortConfFlowControlTxStatus0: disable
1: enable
2: not support.ro Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.7 |
lcsPortConfFlowControlModedefault: 0,
0: disable
1: enable
2: not support.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.8 |
lcsPortConfMaximumFrameSizedefault: 10240 , range : 1518 - 10240rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.1.1.9 |
lcsPortTrafficStatisticsTable SEQUENCE OF LCSPortTrafficStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2 |
lcsPortTrafficStatisticsEntry LCSPortTrafficStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1 |
lcsPortTrafficStatisticsPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.1 |
lcsPortTrafficStatisticsClearrw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.2 |
lcsPortTrafficRxPacketsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.3 |
lcsPortTrafficRxOctetsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.4 |
lcsPortTrafficRxUnicastro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.5 |
lcsPortTrafficRxMulticastro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.6 |
lcsPortTrafficRxBroadcastro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.7 |
lcsPortTrafficRxPausero Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.8 |
lcsPortTrafficRx64Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.9 |
lcsPortTrafficRx65to127Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.10 |
lcsPortTrafficRx128to255Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.11 |
lcsPortTrafficRx256to511Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.12 |
lcsPortTrafficRx512to1023Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.13 |
lcsPortTrafficRx1024to1526Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.14 |
lcsPortTrafficRxExceecd1527Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.15 |
lcsPortTrafficRxQ0ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.16 |
lcsPortTrafficRxQ1ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.17 |
lcsPortTrafficRxQ2ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.18 |
lcsPortTrafficRxQ3ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.19 |
lcsPortTrafficRxQ4ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.20 |
lcsPortTrafficRxQ5ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.21 |
lcsPortTrafficRxQ6ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.22 |
lcsPortTrafficRxQ7ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.23 |
lcsPortTrafficRxDropsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.24 |
lcsPortTrafficRxCRCorAlignmentro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.25 |
lcsPortTrafficRxUndersizero Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.26 |
lcsPortTrafficRxOversizero Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.27 |
lcsPortTrafficRxFragmentsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.28 |
lcsPortTrafficRxJabberro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.29 |
lcsPortTrafficRxFilteredro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.30 |
lcsPortTrafficTxPacketsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.31 |
lcsPortTrafficTxOctetsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.32 |
lcsPortTrafficTxUnicastro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.33 |
lcsPortTrafficTxMulticastro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.34 |
lcsPortTrafficTxBroadcastro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.35 |
lcsPortTrafficTxPausero Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.36 |
lcsPortTrafficTx64Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.37 |
lcsPortTrafficTx65to127Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.38 |
lcsPortTrafficTx128to255Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.39 |
lcsPortTrafficTx256to511Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.40 |
lcsPortTrafficTx512to1023Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.41 |
lcsPortTrafficTx1024to1526Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.42 |
lcsPortTrafficTxExceecd1527Bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.43 |
lcsPortTrafficTxQ0ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.44 |
lcsPortTrafficTxQ1ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.45 |
lcsPortTrafficTxQ2ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.46 |
lcsPortTrafficTxQ3ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.47 |
lcsPortTrafficTxQ4ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.48 |
lcsPortTrafficTxQ5ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.49 |
lcsPortTrafficTxQ6ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.50 |
lcsPortTrafficTxQ7ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.51 |
lcsPortTrafficTxDropsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.52 |
lcsPortTrafficTxLateOrExcCollro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.2.1.53 |
lcsPortQoSStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3 |
lcsPortQoSStatisticsCleardefault: 0
0: none
1: clearro Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.1 |
lcsPortQoSStatisticsTable SEQUENCE OF LCSPortQoSStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2 |
lcsPortQoSStatisticsEntry LCSPortQoSStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1 |
lcsPortQoSStatisticsPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.1 |
lcsPortQoSQ0Rxro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.2 |
lcsPortQoSQ0Txro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.3 |
lcsPortQoSQ1Rxro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.4 |
lcsPortQoSQ1Txro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.5 |
lcsPortQoSQ2Rxro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.6 |
lcsPortQoSQ2Txro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.7 |
lcsPortQoSQ3Rxro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.8 |
lcsPortQoSQ3Txro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.9 |
lcsPortQoSQ4Rxro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.10 |
lcsPortQoSQ4Txro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.11 |
lcsPortQoSQ5Rxro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.12 |
lcsPortQoSQ5Txro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.13 |
lcsPortQoSQ6Rxro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.14 |
lcsPortQoSQ6Txro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.15 |
lcsPortQoSQ7Rxro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.16 |
lcsPortQoSQ7Txro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.3.2.1.17 |
lcsSFPInfoTable SEQUENCE OF LCSSFPInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4 |
lcsSFPInfoEntry LCSSFPInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1 |
lcsSFPInfoIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.1 |
lcsSFPInfoPortro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.2 |
lcsSFPConnectorTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.3 |
lcsSFPFiberTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.4 |
lcsSFPTxCentralWavelengthro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.5 |
lcsSFPBaudRatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.6 |
lcsSFPVendorOUIro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.7 |
lcsSFPVendorNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.8 |
lcsSFPVendorPNro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.9 |
lcsSFPVendorRevro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.10 |
lcsSFPVendorSNro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.11 |
lcsSFPDateCodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.12 |
lcsSFPTemperaturero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.13 |
lcsSFPVccro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.14 |
lcsSFPMon1Biasro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.15 |
lcsSFPMon2TxPWRro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.16 |
lcsSFPMon3RxPWRro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1.4.1.17 |
lcsVoiceVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2 |
lcsVoiceVLANConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1 |
lcsVoiceVLANModeVoice VLAN mode operation.
default: 0,
0: disable
1: enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.1 |
lcsVoiceVLANVLANIdVoice VLAN ID.
default: 1000,
range : 1-4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.2 |
lcsVoiceVLANAgingTimeVoice VLAN secure learning aging time.
default: 86400,
range : 10 - 10000000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.3 |
lcsVoiceVLANTrafficClassVoice VLAN traffic class, all traffic on the Voice VLAN
will apply this class, available value is from 0(Low)
to 7(High).
default: 7.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.4 |
lcsVoiceVLANPortTableShow Voice Vlan configuration. SEQUENCE OF LCSVoiceVLANPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.5 |
lcsVoiceVLANPortEntry LCSVoiceVLANPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.5.1 |
lcsVoiceVLANPortport, range : 1 - port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.5.1.1 |
lcsVoiceVLANPortModeVoice VLAN port mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members automatically.)
2: Forced (Force join to Voice VLAN.)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.5.1.2 |
lcsVoiceVLANPortSecurityVoice VLAN port security mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: enable ( Enable Voice VLAN security mode. When the function is
enabled, all non-telephone MAC address in Voice VLAN
will be blocked 10 seconds.)rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.5.1.3 |
lcsVoiceVLANPortDiscoveryProtocolVoice VLAN port discovery protocol.
default: 0
0: OUI (Detect telephony device by OUI address.)
1: LLDP (Detect telephony device by LLDP.)
2: Both (Both OUI and LLDP.)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.1.5.1.4 |
lcsVoiceVLANOUI OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.2 |
lcsVoiceVLANOUICreatedefault: 0
0 : None (read only)
1 : Create an OUI entryrw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.2.1 |
lcsVoiceVLANOUITableCreate Voice VLAN OUI entry. Modify OUI table will
restart auto detect OUI process. SEQUENCE OF LCSVoiceVLANOUIEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.2.2 |
lcsVoiceVLANOUIEntry LCSVoiceVLANOUIEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.2.2.1 |
lcsVoiceVLANOUIIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.2.2.1.1 |
lcsVoiceVLANTelephonyOUIOUI address, format : 0a 1b 2crw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.2.2.1.2 |
lcsVoiceVLANDescriptionUp to 32 characters describing OUI address.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.2.2.1.3 |
lcsVoiceVLANOUIRowStatusThis object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this table
may be modified while the value of the corresponding instance
of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.2.2.2.1.4 |
lcsGVRP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4 |
lcsGVRPConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1 |
lcsGVRPModedefault: 0,
0: disable,
1: enable.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.1 |
lcsGVRPMaxVlanNumber of simultaniously VLANs that GVRP can control.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.2 |
lcsGVRPJoinTimejoin-time in units of centi seconds. Range is 1-20. Default is 20.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.3 |
lcsGVRPLeaveTimeleave-time in units of centi seconds. Range is 60-300. Default is 60.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.4 |
lcsGVRPLeaveAllTimeleave-all-time in units of centi seconds Range is 1000-5000. Default is 1000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.5 |
lcsGVRPConfTable SEQUENCE OF LCSGVRPConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.6 |
lcsGVRPConfEntry LCSGVRPConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.6.1 |
lcsGVRPConfPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.6.1.1 |
lcsGVRPConfPortModedefault: 0
1: enable
0: disablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.4.1.6.1.2 |
lcsMirroring OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.6 |
lcsMonitorSessionMonitor session.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.6.1 |
lcsPortToMirrorOndefault: 0
0: disable,
range : 1 - port number.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.6.2 |
lcsMirrorTable SEQUENCE OF LCSMirrorEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.6.3 |
lcsMirrorEntry LCSMirrorEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.6.3.1 |
lcsMirrorPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.6.3.1.1 |
lcsMirrorModedefault: 0
0: disable
1: rx only
2: tx only
3: enable
Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignoredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.6.3.1.2 |
lcsTrapEventSeverity OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7 |
lcsTrapEventSeverityTable SEQUENCE OF LCSTrapEventSeverityEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7.1 |
lcsTrapEventSeverityEntry LCSTrapEventSeverityEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7.1.1 |
lcsTrapEventSeverityIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7.1.1.1 |
lcsTrapEventSeverityGroupNameGroup Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7.1.1.2 |
lcsTrapEventSeverityLevel0:Emergency
1:Alert
2:Critical
3:Error
4:Warning
5:Notice
6:Information
7:Debugrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7.1.1.3 |
lcsTrapEventSeveritySyslog0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7.1.1.4 |
lcsTrapEventSeverityTrap0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7.1.1.5 |
lcsTrapEventSeveritySMTP0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.7.1.1.6 |
lcsSMTP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8 |
lcsSMTPMailServerUp to 47 characters describing email server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.1 |
lcsSMTPUserNameUp to 47 characters describing user name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.2 |
lcsSMTPPasswordUp to 47 characters describing password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.3 |
lcsSMTPSenderUp to 47 characters describing sender.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.5 |
lcsSMTPReturnPathUp to 47 characters describing return path.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.6 |
lcsSMTPEmailAddress1Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.7 |
lcsSMTPEmailAddress2Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.8 |
lcsSMTPEmailAddress3Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.9 |
lcsSMTPEmailAddress4Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.10 |
lcsSMTPEmailAddress5Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.11 |
lcsSMTPEmailAddress6Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.8.12 |
lcsACLConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9 |
lcsACL OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1 |
lcsACLPortConfTableThe ACL Port Conf Table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSACLPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1 |
lcsACLPortConfEntryThe ACL Port Conf Entry. LCSACLPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1 |
lcsACLPortConfPolicyIDThe policy to apply to this port.
default: 0, range : 0 - 127.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.2 |
lcsACLPortConfActionWhether forwarding is permitted ('Permit') or denied ('Deny').
default: 1,
0: Deny,
1: Permit.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.3 |
lcsACLPortConfRateLimiterIDThe rate limiter to apply on this port.
0: Disable,
range : 0 - 16.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.4 |
lcsACLPortConfPortRedirectPort frames are redirected on.
0: Disable,
range : 0 - end port number.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.5 |
lcsACLPortConfMirrorThe mirror operation of this port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.6 |
lcsACLPortConfLoggingSpecify the logging operation of this port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.7 |
lcsACLPortConfShutdownSpecify the port shut down operation of this port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.8 |
lcsACLPortConfStateSpecify the port state of this port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.9 |
lcsACLPortConfCounterCounts the number of frames that match this ACE.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.1.1.10 |
lcsACLRateLimiterTableThe ACL Rate Limiter Table. SEQUENCE OF LCSACLRateLimiterEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.2 |
lcsACLRateLimiterEntryThe ACL Rate Limiter Entry. LCSACLRateLimiterEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.2.1 |
lcsACLRateLimiterIDRate Limiter ID.
range : 1-16 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.2.1.1 |
lcsACLRateLimiterRatedefault: 1,
range :
<0-500000> 10pps,The valid rate is 0, 10, 20, 30,
..., 5000000 in pps.
<0-400000> 25kbps,The valid rate is 0, 25, 50, 75,...,
10000000 in kbps.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.2.1.2 |
lcsACLRateLimiterUnitSpecify the rate unit.
0: 10pps, 1: 25kbps.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.2.1.3 |
lcsACLStatusTableACL ACE Status entry. SEQUENCE OF LCSACLStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4 |
lcsACLStatusEntryThe ACL Status Entry. LCSACLStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1 |
lcsACLStatusIndexThe ACL status index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.1 |
lcsACLStatusUserIndicates the ACL user.
S : Static,
IPMG : IP Management,
IPSG : IP Source Guard,
IPMC : IPMC,
ARPI : Arp Inspection,
UPnP : UPnP,
DHCP : DHCP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.2 |
lcsACLStatusIDACE ID.
range : 1 - 256.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.3 |
lcsACLStatusIngressPortIndicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.4 |
lcsACLStatusFrameTypeIndicates the frame type of the ACE.
Any: The ACE will match any frame type.
EType: The ACE will match Ethernet Type frames.
Note that an Ethernet Type based ACE will not get matched
by IP and ARP frames.
ARP: The ACE will match ARP/RARP frames.
IPv4: The ACE will match all IPv4 frames.
IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol.
IPv4/UDP: The ACE will match IPv4 frames with UDP protocol.
IPv4/TCP: The ACE will match IPv4 frames with TCP protocol.
IPv4/Other: The ACE will match IPv4 frames, which are not
ICMP/UDP/TCP.
IPv6: The ACE will match all IPv6 standard frames.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.5 |
lcsACLStatusActionIndicates the forwarding action of the ACE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.6 |
lcsACLStatusRateLimiterIndicates the rate limiter number of the ACE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.7 |
lcsACLStatusPortRedirectIndicates the port redirect operation of the ACE.
Frames matching the ACE are redirected to the port number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.8 |
lcsACLStatusMirrorSpecify the mirror operation of this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.9 |
lcsACLStatusCPUForward packet that matched the specific ACE to CPU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.10 |
lcsACLStatusCPUOnceForward first packet that matched the specific ACE to CPU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.11 |
lcsACLStatusCounterThe counter indicates the number of times the ACE was hit
by a frame.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.12 |
lcsACLStatusConflictIndicates the hardware status of the specific ACE.
The specific ACE is not applied to the hardware due to
hardware limitations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.4.1.13 |
lcsAclConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.200 |
lcsAclCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.200.1 |
lcsAclGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.1.200.2 |
lcsACLACE OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3 |
lcsACLACEClearClear all ACE counters.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.1 |
lcsACLACETableCreate ACL ACE entry. SEQUENCE OF LCSACLACEEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2 |
lcsACLACEEntryThe ACLACE Table. LCSACLACEEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1 |
lcsACLACEIndexThe index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.1 |
lcsACLACEIDIf the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.2 |
lcsACLACENextIDIf the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.3 |
lcsACLACEIngressPortIndicates the ingress port of the ACE. Possible values are:
0: All,The ACE will match all ingress port.
Port n: The ACE will match a specific ingress port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.5 |
lcsACLACEPortPolicyNumberpolicy value.
range : 0 - 127.
0: Any.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.6 |
lcsACLACEPortPolicyBitmaskWhen 'Specific' is selected for the policy filter,
you can enter a specific policy bitmask.
range : 0 - 127, 0: no data.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.7 |
lcsACLACEFrameTypeSelect the frame type for this ACE.
When change the type Related oid will set default.
0: any,
1: etype,
2: arp,
3: ipv4,
4: ipv6.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.8 |
lcsACLACEAction0: Deny
1: Permit
2: Filterrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.9 |
lcsACLACEFilterPortWhen 'Action' is 'Filter' can set.
0: Disable,
Port n: The ACE applies to this port number, where n is
the number of the switch port.
range: 0 - Port number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.10 |
lcsACLACEDenyPortRedirectFrames that hit the ACE are redirected to the port
number specified here.Disabled,indicates that the port
redirect operation is disabled.
When 'Action' is 'Deny' can set.
0: disabled,
Port no: The ACE applies to this port number, where n is
the number of the switch port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.11 |
lcsACLACERateLimiterdefault: 0,
0: Disable
range : 0 - 16rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.12 |
lcsACLACEMirrordefault: 0,
0: disable - Frames matching the ACE are not mirrored.
1: enable - Frames matching the ACE are mirrored.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.13 |
lcsACLACELoggingdefault: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the
system log.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.14 |
lcsACLACEShutdowndefault: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port
will be disabled.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.15 |
lcsACLACECounterThe counter indicates the number of times the ACE was
hit by a frame.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.16 |
lcsACLACEVLAN8021QTaggedSpecify whether frames can hit the action according to
the 802.1Q tagged.
default: 2,
0: disable - Untagged frame only.
1: enable - Tagged frame only.
2: Any - Any value is allowed.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.17 |
lcsACLACEVLANVIDSpecify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.18 |
lcsACLACEVLANTagPrioritySpecify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled.
range: 0-14
0:0
1:1
2:2
3:3
4:4
5:5
6:6
7:7
8:0-1
9:2-3
10:4-5
11:6-7
12:0-3
13:4-7
14:Anyrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.19 |
lcsACLACESMACConfigure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this
source MAC address value. xx-xx-xx-xx-xx-xx.
Any: Don't care.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.20 |
lcsACLACEDMACTypeDMAC Type.
default: 0,
0: Any - Don't care.
1: Multicast - Frame must be multicast.
2: Broadcast - Frame must be broadcast.
3: Unicast - Frame must be unicast.
4: mac address.
5: no data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.21 |
lcsACLACEDMACConfigure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this
destination MAC address value. xx-xx-xx-xx-xx-xx.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.22 |
lcsACLACEEtherType0: Any
range : 0, or 1536(0x0600) - 65535(0xffff) but excluding 0x0800(IPv4) 0x0806(ARP) and
0x86DD(IPv6).
-1: No data.rw Integer32(-1..65535) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.23 |
lcsACLACEArpOpCodeConfigure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.24 |
lcsACLACEArpFlagsRequestReplySpecify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP flag set.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.25 |
lcsACLACEArpFlagsArpSMacSpecify whether frames can hit the action according to their
sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.26 |
lcsACLACEArpFlagsRarpDmacSpecify whether frames can hit the action according to
their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1: RARP frames where THA is equal to the DMAC address.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.27 |
lcsACLACEArpFlagsLengthSpecify whether frames can hit the action according to
their ARP/RARP hardware address length (HLN) and protocol
address length (PLN) settings.
default: 2,
0: ARP/RARP frames where the HLN is not equal to
Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04).
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06)
and the (PLN) is equal to IPv4(0x04).
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.28 |
lcsACLACEArpFlagsIpSpecify whether frames can hit the action according to
their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(1).
1: ARP/RARP frames where the HLD is equal to Ethernet(1).
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.29 |
lcsACLACEArpFlagsEthernetSpecify whether frames can hit the action
according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x800).
1: ARP/RARP frames where the PRO is equal to IP(0x800).
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.30 |
lcsACLACESIPTypeConfigure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: Network.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.31 |
lcsACLACESIPIPAddressA frame that hits this ACE matches this source IP address
value.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.32 |
lcsACLACESIPIPMaskSpecific sender IP mask in dotted decimal notation.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.33 |
lcsACLACEDIPTypeConfigure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: Network.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.34 |
lcsACLACEDIPIPAddressA frame that hits this ACE matches this destination IP
address value.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.35 |
lcsACLACEDIPIPMaskSpecific sender IP mask in dotted decimal notation.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.36 |
lcsACLACEIPProtocolSpecify the IP protocol filter for this ACE.
default: 0,
0: Any,
1: ICMP,
2: UDP,
3: TCP,
4: Other,
5: no data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.37 |
lcsACLACEIPProtocolValueConfigure IP protocol value for this ACE when IP Protocol
is 'other'.
default: 256,
256: No data.
range : 0 - 256rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.38 |
lcsACLACEIPFlagsTTLSpecify the Time-to-Live settings for this ACE.
default: 0,
0: zero,
1: Non-Zero
2: Any,,
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.39 |
lcsACLACEIPFlagsFragmentSpecify the fragment offset settings for this ACE.
default: 2,
0: No,
1: Yes,
2: Any,
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.40 |
lcsACLACEIPFlagsOptionsSpecify the options flag setting for this ACE.
default: 2,
0: No,
1: Yes,
2: Any,
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.41 |
lcsACLACEICMPTypeConfigure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.42 |
lcsACLACEICMPCodeConfigure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 257.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.43 |
lcsACLACESourcePortConfigure Source UDP/TCP port range for this ACE.
default: any,
specific: 0~65535,
range : 0 - 65535.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.44 |
lcsACLACEDestPortConfigure Destination UDP/TCP port range for this ACE.
default: any,
specific: 0~65535,
range : 0 - 65535.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.45 |
lcsACLACETCPFlagsFinConfigure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.46 |
lcsACLACETCPFlagsSynConfigure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.47 |
lcsACLACETCPFlagsRstConfigure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.48 |
lcsACLACETCPFlagsPshConfigure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.49 |
lcsACLACETCPFlagsAckConfigure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.50 |
lcsACLACETCPFlagsUrgConfigure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.51 |
lcsACLACEIPv6SIPAddressWhen 'Specific' is selected for the source IPv6 filter,
you can enter a specific SIPv6 address.
The field only supported last 32 bits for IPv6 address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.52 |
lcsACLACEIPv6SIPBitmaskWhen 'Specific' is selected for the source IPv6 filter,
you can enter a specific SIPv6 mask.
The field only supported last 32 bits for IPv6 address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.53 |
lcsACLACEIPv6HopLimitSpecify the hop limit settings for this ACE.
default: 2,
0: Where the Hop Limit field is unset.
1: Where the Hop Limit field is set.
2: Any - Don't care,
3: No data.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.54 |
lcsACLACESMACMaskConfigure source MAC address mask for this ACE.
<mac-address>: A frame that hits this ACE matches this
source MAC address value. xx-xx-xx-xx-xx-xx.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.56 |
lcsACLACEDMACMaskConfigure destination MAC address mask for this ACE.
<mac-address>: A frame that hits this ACE matches this
destination MAC address value. xx-xx-xx-xx-xx-xx.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.57 |
lcsACLACERowStatusThis object indicates the status of this entry, and is
used to create/delete entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.9.3.2.1.58 |
lcsQosConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10 |
lcsQos OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1 |
lcsQosPortClassification OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1 |
lcsQosPortClassificationTableQoS Ingress Port Classification.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosPortClassificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1 |
lcsQosPortClassificationEntryThe Qos Port Classification Table. LCSQosPortClassificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1.1 |
lcsQosPortClassificationQoSClassControls the default QoS class, i.e., the QoS class for
frames not classified
in any way. There is a one to one mapping between
QoS class, queue and
priority. A QoS class of 0 (zero) has the lowest priority.
NOTe: If the QoS class has been dynamically changed, then
the actual QoS class
is shown in parentheses after the configured QoS class.
range: 0~7,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1.1.2 |
lcsQosPortClassificationDPlevelDP level for frames not classified in any way.
range: 0~3,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1.1.3 |
lcsQosPortClassificationPCPPriority Code Point. It is a 3-bit field storing
the priority level for the 802.1Q frame.
range: 0~7,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1.1.4 |
lcsQosPortClassificationDEIDrop Eligible Indicator. It is a 1-bit field in the VLAN.
range 0~1,
default: 0.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1.1.5 |
lcsQosPortClassificationPCPClassificationConfigure the classification mode for tagged frames.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1.1.6 |
lcsQosPortClassificationDSCPBasedClick to Enable DSCP Based QoS Ingress Port Classification.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1.1.7 |
lcsQosPortClassificationWredGroupControls the WRED group membership. Range:1-3.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.1.1.10 |
lcsQoSIngressPortTagClassificationTableShow QoS Ingress Port Tag Classification.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQoSIngressPortTagClassificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.2 |
lcsQoSIngressPortTagClassificationEntryQoS Ingress Port Tag Classification entry. LCSQoSIngressPortTagClassificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.2.1 |
lcsQoSIngressPortTagPCPrange: 1-8,
PCP0:1, PCP1:2... Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.2.1.2 |
lcsQoSIngressPortTagDEIIngress Port Tag dei,
DEI0:1, DEI1:2. Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.2.1.3 |
lcsQoSIngressPortTagQosClassrange: 0-7.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.2.1.4 |
lcsQoSIngressPortTagDPLevelrange: 0-3.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.1.2.1.5 |
lcsQosPortPolicing OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.2 |
lcsQosPortPolicingTableThe Policer settings.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosPortPolicingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.2.1 |
lcsQosPortPolicingEntryThe Policer setting entry. LCSQosPortPolicingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.2.1.1 |
lcsQosPortPolicingEnabledControls whether the policer is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.2.1.1.2 |
lcsQosPortPolicingRateControls the rate for the policer.
default: 500(kbps).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.2.1.1.3 |
lcsQosPortPolicingUnitControls the unit of measure for the policer rate.
0: kbps
1: Mbps
2: fps
3: kfpsrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.2.1.1.4 |
lcsQosPortPolicingFlowControlIf flow control is enabled and the port is in flow control mode,
then pause frames are sent instead of discarding frames.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.2.1.1.5 |
lcsQosEgressPortPCPRemarking OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6 |
lcsQosEgressPortPCPRemarkingTableThe basic Qos Egress Port PCP Remarking
Configuration settings.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosEgressPortPCPRemarkingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.1 |
lcsQosEgressPortPCPRemarkingEntryThe Qos Egress Port PCP Remarking Entry. LCSQosEgressPortPCPRemarkingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.1.1 |
lcsQosEgressPortPCPRemarkingModethe tag remarking mode for this port.
0:Keep, Use classified PCP/DEI values.
1:Specific, Use default PCP/DEI values.
2:Mapped, Use mapped versions of QoS class and DP level.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.1.1.2 |
lcsQosEgressPortPCPRemarkingSpecificTableThe basic Qos Egress Port PCP Remarking Specific
Configuration settings.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosEgressPortPCPRemarkingSpecificEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.2 |
lcsQosEgressPortPCPRemarkingSpecificEntryThe Qos Egress Port PCP Remarking Specific Entry. LCSQosEgressPortPCPRemarkingSpecificEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.2.1 |
lcsQosEgressPortPCPRemarkingSpecificPCPControls the specific PCP
Range : 0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.2.1.2 |
lcsQosEgressPortPCPRemarkingSpecificDEIcontrols the admin state of DEIrw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.2.1.3 |
lcsQosEgressPortPCPRemarkingMappedTableShow Qos Egress Port PCP Remarking Mapped.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosEgressPortPCPRemarkingMappedEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.4 |
lcsQosEgressPortPCPRemarkingMappedEntryThe Qos Egress Port PCP Remarking Mapped Entry. LCSQosEgressPortPCPRemarkingMappedEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.4.1 |
lcsQosEgressPortPCPRemarkingMappedQueuePriorityrange: 1-8,
QoS Class0: 1, QoS Class1: 2... Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.4.1.2 |
lcsQosEgressPortPCPRemarkingMappedDPLevelrange: 1-2,
DP Level0: 1, DP Level1: 2. Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.4.1.3 |
lcsQosEgressPortPCPRemarkingMappedPCPrange: 0-7.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.4.1.4 |
lcsQosEgressPortPCPRemarkingMappedDEIrange: 0-1.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.6.4.1.5 |
lcsQosPortDSCP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.7 |
lcsQosPortDSCPTableThe basic QoS Port DSCP Configuration settings.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosPortDSCPEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.7.1 |
lcsQosPortDSCPEntryThe Qos Port DSCP Entry. LCSQosPortDSCPEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.7.1.1 |
lcsQosPortDSCPIngressTranslateConfigure DSCP ingress translation mode.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.7.1.1.2 |
lcsQosPortDSCPIngressClassifyClassification for a port have 4 different values.
0: disable,
1: DSCP=0,
2: Selected,
3: All.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.7.1.1.3 |
lcsQosPortDSCPEgressRewriteConfigure the port egress rewriting mode.
0: Disable,1: Enable,2: Remap,range: 0-2rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.7.1.1.4 |
lcsQosDSCPBasedQoS OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.8 |
lcsQosDSCPBasedQoSTableconfigure the basic Qos DSCP-Based QoS Ingress Classification settings for all switches. SEQUENCE OF LCSQosDSCPBasedQoSEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.8.1 |
lcsQosDSCPBasedQoSEntryThe Qos DSCP Based QoS Entry. LCSQosDSCPBasedQoSEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.8.1.1 |
lcsQosDSCPBasedQoSListDSCP mapping table index(1-64). Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.8.1.1.1 |
lcsQosDSCPBasedQoSDSCPMaximum number of supported DSCP values are 64.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.8.1.1.2 |
lcsQosDSCPBasedQoSTrustControls whether a specific DSCP value is trusted. Only frames with
trusted DSCP values are mapped to a specific QoS class
and Drop Precedence
Level. Frames with untrusted DSCP values are
treated as a non-IP frame.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.8.1.1.3 |
lcsQosDSCPBasedQoSQueuePriorityQoS class.
range: 0-7,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.8.1.1.4 |
lcsQosDSCPBasedQoSDPLDrop Precedence Level.
range: 0-1,
default: 0.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.8.1.1.5 |
lcsQosDSCPTranslation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.9 |
lcsQosDSCPTranslationTableThe basic QoS DSCP Translation settings for all switches. SEQUENCE OF LCSQosDSCPTranslationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.9.1 |
lcsQosDSCPTranslationEntryThe Qos DSCP Translation Entry. LCSQosDSCPTranslationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.9.1.1 |
lcsQosDSCPTranslationListDSCP translation table index(1-64). Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.9.1.1.1 |
lcsQosDSCPTranslationDSCPBasedIdConfigure global ingress DSCP translation table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.9.1.1.2 |
lcsQosDSCPTranslationIngressTranslateDSCP at Ingress side can be translated to any of DSCP values.
range: 0-63,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.9.1.1.3 |
lcsQosDSCPTranslationIngressClassifyConfigure DSCP ingress classification.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.9.1.1.4 |
lcsQosDSCPTranslationEgressRemapSelect the DSCP value from select menu to which you want to remap.
range: 0-63,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.9.1.1.5 |
lcsQosDSCPClassification OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.10 |
lcsQosDSCPClassificationTableThe mapping of QoS class to DSCP value. SEQUENCE OF LCSQosDSCPClassificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.10.1 |
lcsQosDSCPClassificationEntryThe Qos DSCP Classification Entry. LCSQosDSCPClassificationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.10.1.1 |
lcsQosDSCPClassificationQoSClassThis page allows you to configure the mapping of QoS class
and Drop Precedence Level to DSCP value.
range: 1-8} Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.10.1.1.1 |
lcsQosDSCPClassificationDSCPDP0Select the classified DSCP value.
range: 0-63,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.10.1.1.2 |
lcsQosDSCPClassificationDSCPDP1Select the classified DSCP value.
range: 0-63,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.10.1.1.3 |
lcsQosDSCPClassificationDSCPDP2Select the classified DSCP value.
range: 0-63,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.10.1.1.4 |
lcsQosDSCPClassificationDSCPDP3Select the classified DSCP value.
range: 0-63,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.10.1.1.5 |
lcsQosControlList OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11 |
lcsQosQceTableCreate Qos QCE entry. SEQUENCE OF LCSQosQceEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1 |
lcsQosQceEntryQos Qce Entry. LCSQosQceEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1 |
lcsQosQceIndexthe index to this table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.1 |
lcsQosQceIDIf the QCE ID is specified and an entry with this QCE ID
already exists, the QCE will be modified. Otherwise, a
new QCE will be added.
range : 1 - 256.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.2 |
lcsQosQceListIf the QCE List is non zero, the QCE will be placed in the list.
If the QCE List is zero, the QCE will be placed last in the list.
range : 0 - 256.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.3 |
lcsQosQcePortMembersIndicates the ingress port of the QCE. Possible values are:
All: The QCE will match all ingress port.
Port: The QCE will match a specific ingress port.Format: 1,3-6.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.5 |
lcsQosQceTag'Any', 'Untagged' or 'Tagged' or 'C-Tag' or 'S-Tag'rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.6 |
lcsQosQceVIDValid value of VLAN ID can be any value in
'Specific 1~4094' or 'range 1-4094' or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.7 |
lcsQosPCPPriority Code Point: Valid value PCP are
specific(0, 1, 2, 3, 4, 5, 6, 7)
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.8 |
lcsQosDEIDrop Eligible Indicator: Valid value of DEI can be
any of values between 0, 1 or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.9 |
lcsQosSMACSource MAC address: xx-xx-xx-xx-xx-xx or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.10 |
lcsQosDMACTypeDestination MAC type: possible values are 'UC'(unicast),
'MC'(multicast), 'BC'(broadcast), 'SP'(Specific) or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.11 |
lcsQosDMACValuewhen QosDMACType is 'SP'(specific) can set mac address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.12 |
lcsQosQceInnerTagValue of Inner Tag field can be 'Any', 'Untagged' or 'Tagged' or
'C-tagged' or 'S-tagged'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.13 |
lcsQosQceInnerVIDValid value of Inner VLAN ID can be any value in
'Specific 1~4094' or 'range 1-4094' or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.14 |
lcsQosInnerPCPValid value Inner PCP are specific(0, 1, 2, 3, 4, 5, 6, 7)
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.15 |
lcsQosInnerDEIValid value of Inner DEI can be any of values between
0, 1 or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.16 |
lcsQosFrameTypeFrame Type can have any of the following values:
1: Any,
2: Ethernet,
3: LLC,
4: SNAP,
5: IPv4,
6: IPv6.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.17 |
lcsQosMacEtherTypeValid ethernet type can have a value within 0x600-0xFFFF or 'Any' ,
but excluding 0x800(IPv4) and 0x86DD(IPv6),
range: 0000-FFFF,
default: Any.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.18 |
lcsQosLLCSSAPAddrValid SSAP(Source Service Access Point) can vary from
0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.19 |
lcsQosLLCDSAPAddrValid DSAP(Destination Service Access Point) can
vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.20 |
lcsQosLLCControlValid Control field can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.21 |
lcsQosSNAPPIDValid PID(a.k.a ethernet type) can have value within
0x00-0xFFFF or 'Any',
range: 0000-FFFF,
default: Any.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.22 |
lcsQosIpv4ProtocolIP protocol number: (Other, TCP or UDP) or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.23 |
lcsQosIpv4ProtocolValueIpv4 Protocol is Other.
range: 0-255
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.24 |
lcsQosIpv4ProtocolUDPSPortSource TCP/UDP Port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.25 |
lcsQosIpv4ProtocolUDPDPortDestination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.26 |
lcsQosIpv4ProtocolTCPSPortSource TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.27 |
lcsQosIpv4ProtocolTCPDPortDestination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.28 |
lcsQosIpv4SourceIpSpecific Source IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
(x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.29 |
lcsQosIpv4SourceMaskSpecific Source IP address in mask format or value 0.0.0.0 is 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.30 |
lcsQosIpv4DestIpSpecific Destination IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
(x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.31 |
lcsQosIpv4DestMaskSpecific Destination IP address in mask format or value 0.0.0.0 is 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.32 |
lcsQosIpv4IPFragmentIPv4 frame fragmented option:
2: yes,
1: no,
0: any.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.33 |
lcsQosIpv4DSCPDiffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.34 |
lcsQosIpv6ProtocolIP protocol number: (Other, TCP or UDP) or 'Any'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.35 |
lcsQosIpv6ProtocolValuewhen IPv6 protocol is Other ,
range: 0-255.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.36 |
lcsQosIpv6ProtocolUDPSPortSource TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.37 |
lcsQosIpv6ProtocolUDPDPortDestination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.38 |
lcsQosIpv6ProtocolTCPSPortSource TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.39 |
lcsQosIpv6ProtocolTCPDPortDestination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.40 |
lcsQosIpv6SourceIpIPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.41 |
lcsQosIpv6SourceMaskIPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.42 |
lcsQosIpv6DestIpIPv6 destination address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.43 |
lcsQosIpv6DestMaskIPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.44 |
lcsQosIpv6DSCPDiffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the
range 0-63 including BE,
CS1-CS7, EF or AF11-AF43.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.45 |
lcsQosActionQueuePriorityQoS class: (0-7) or 8: Default.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.46 |
lcsQosActionDPLrange:0-4. 4: Defaultrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.47 |
lcsQosActionDSCPValid DSCP value can be (0-63, BE, CS1-CS7,
EF or AF11-AF43) or 64: Default.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.48 |
lcsQosActionPCPpcp: (0-7) or 8: Default.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.49 |
lcsQosActionDEIdei: (0-1) or 2: Default.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.50 |
lcsQosActionPolicyACL Policy number: (0-127) or 'empty'(128). Default: empty.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.51 |
lcsQosActionIngressMapIDClassify Ingress Map ID:
Range: 0-255
Default: -1rw Integer32(-1..255) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.52 |
lcsQosQceRowStatusThis object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this table
may be modified while the value of the corresponding instance
of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.11.1.1.53 |
lcsQosStormControl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.12 |
lcsQosStormControlTableThe basic QoS DSCP Translation settings for all switches. SEQUENCE OF LCSQosStormControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.12.1 |
lcsQosStormControlEntryThe Qos Storm Control Entry. LCSQosStormControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.12.1.1 |
lcsQosStormControlFrameTypeThe settings in a particular row apply to the frame type listed here.
1:Unicast,
2:Multicast,
3:Broadcast. Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.12.1.1.1 |
lcsQosStormControlEnabledEnable or disable the global storm policer for the given frame type.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.12.1.1.2 |
lcsQosStormControlRateControls the rate for the global storm policer.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.12.1.1.3 |
lcsQosStormControlUnitControls the unit of measure for the global storm policer rate as fps or kfps.
0: kbps
1: Mbps
2: fps
3: kfpsrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.12.1.1.4 |
lcsQosPortStormControl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13 |
lcsQosPortStormControlTableConfigure the storm control settings.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosPortStormControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1 |
lcsQosPortStormControlEntryThe Qos Port Storm Control Entry. LCSQosPortStormControlEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1 |
lcsQosPortStormControlUnicastEnabledControls whether the storm control is enabled on this
switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.2 |
lcsQosPortStormControlUnicastRateControls the rate for the storm control.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.3 |
lcsQosPortStormControlUnicastUnitControls the unit of measure for the storm control rate.
0: kbps
1: Mbps
2: fps
3: kfpsrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.4 |
lcsQosPortStormControlBroadcastEnabledControls whether the storm control is enabled on this
switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.5 |
lcsQosPortStormControlBroadcastRateControls the rate for the storm control.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.6 |
lcsQosPortStormControlBroadcastUnitControls the unit of measure for the storm control rate.
0: kbps
1: Mbps
2: fps
3: kfpsrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.7 |
lcsQosPortStormControlUnknownEnabledControls whether the storm control is enabled on this
switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.8 |
lcsQosPortStormControlUnknownRateControls the rate for the storm control.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.9 |
lcsQosPortStormControlUnknownUnitControls the unit of measure for the storm control rate.
0: kbps
1: Mbps
2: fps
3: kfpsrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.13.1.1.10 |
lcsQosWRED OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14 |
lcsQosWREDTableThe basic QoS DSCP Translation settings for all switches. SEQUENCE OF LCSQosWREDEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1 |
lcsQosWREDEntryThe Qos WRED Entry. LCSQosWREDEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1.1 |
lcsQosWREDGroupIndexThe group number for which the configuration
below applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1.1.1 |
lcsQosWREDQueueThe queue number (QoS class) for which the configuration
below applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1.1.2 |
lcsQosWREDDPLThe dpl number for which the configuration
below applies. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1.1.3 |
lcsQosWREDEnableControls whether RED is enabled for this queue.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1.1.4 |
lcsQosWREDMinThresholdControls the lower RED fill level threshold. If the queue filling
level is below this threshold, the drop probability is zero.
range:0-100%,
default: 0.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1.1.5 |
lcsQosWREDMaxThresholdControls the upper RED drop probability or fill level threshold
for frames marked with Drop Precedence Level 1 (yellow frames).
range:0-100%,
default: 50.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1.1.6 |
lcsQosWREDMaxUnitSelects the unit for Max.
0: Drop Probability,
1: Fill Level,
default: Drop Probability.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.14.1.1.7 |
lcsQosQCLStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15 |
lcsQosQCLStatusTableThe basic QoS DSCP Translation settings for all switches. SEQUENCE OF LCSQosQCLStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1 |
lcsQosQCLStatusEntryThe Qos QCL Status Entry. LCSQosQCLStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1 |
lcsQosQCLStatusListQCL table index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.1 |
lcsQosQCLStatusUserIndicates the QCL user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.2 |
lcsQosQCLStatusQCEIdIndicates the index of QCE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.3 |
lcsQosQCLStatusFrameTypeIndicates the type of frame to look for incomming frames.
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF)
are allowed.
LLC: Only (LLC) frames are allowed.
SNAP: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.4 |
lcsQosQCLStatusPortlistIndicates the list of ports configured with the QCE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.5 |
lcsQosQCLStatusActionQueuePriorityClassified QoS class; if a frame matches the
QCE it will be put in the queue.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.6 |
lcsQosQCLStatusActionDPLDrop Precedence Level; if a frame matches the QCE then
DP level will set to value displayed under DPL column.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.7 |
lcsQosQCLStatusActionDSCPIf a frame matches the QCE then DSCP will be
classified with the value
displayed under DSCP column.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.8 |
lcsQosQCLStatusActionPCPClassify PCP value.
Only support SERVAL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.9 |
lcsQosQCLStatusActionDELClassify DEI value.
Only support SERVAL.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.10 |
lcsQosQCLStatusActionPolicyClassify ACL Policy number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.11 |
lcsQosQCLStatusConflictDisplays Conflict status of QCL entries.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.12 |
lcsQosQCLStatusDMACDestination MAC address: Possible values are 'Unicast', 'Multicast', 'Broadcast' or 'Any'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.14 |
lcsQosQCLStatusSMACSource MAC address: xx-xx-xx-xx-xx-xx or 'Any'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.15 |
lcsQosQCLStatusTagValue of Tag field can be 'Untagged', 'Tagged', 'C-Tagged', 'S-Tagged' or 'Any'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.16 |
lcsQosQCLStatusVIDValid value of VLAN ID can be any value in the range 1-4094 or 'Any'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.17 |
lcsQosQCLStatusPCPValid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.18 |
lcsQosQCLStatusDEIValid value of DEI can be '0', '1' or 'Any'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.15.1.1.19 |
lcsQosPortShapers OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16 |
lcsQosPortShaperTableINDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosPortShaperEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1 |
lcsQosPortShaperEntryThe Qos Port Shaper Entry. LCSQosPortShaperEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1 |
lcsQosPortShaperQueue0EnableControls whether the queue shaper is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.3 |
lcsQosPortShaperQueue0RateControls whether the queue shaper rate.
default: 500(Kbps)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.4 |
lcsQosPortShaperQueue0UnitControls the unit of measure for the queue shaper rate as kbps or Mbps.
range:
0:kbs
1:Mbps
default: 0(kbps)rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.5 |
lcsQosPortShaperQueue1EnableControls whether the queue shaper is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.6 |
lcsQosPortShaperQueue1RateControls whether the queue shaper rate.
default: 500(Kbps)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.7 |
lcsQosPortShaperQueue1UnitControls the unit of measure for the queue shaper rate as kbps or Mbps.
range:
0:kbs
1:Mbps
default: 0(kbps)rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.8 |
lcsQosPortShaperQueue2EnableControls whether the queue shaper is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.9 |
lcsQosPortShaperQueue2RateControls whether the queue shaper rate.
default: 500(Kbps)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.10 |
lcsQosPortShaperQueue2UnitControls the unit of measure for the queue shaper rate as kbps or Mbps.
range:
0:kbs
1:Mbps
default: 0(kbps)rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.11 |
lcsQosPortShaperQueue3EnableControls whether the queue shaper is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.12 |
lcsQosPortShaperQueue3RateControls whether the queue shaper rate.
default: 500(Kbps)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.13 |
lcsQosPortShaperQueue3UnitControls the unit of measure for the queue shaper rate as kbps or Mbps.
range:
0:kbs
1:Mbps
default: 0(kbps)rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.14 |
lcsQosPortShaperQueue4EnableControls whether the queue shaper is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.15 |
lcsQosPortShaperQueue4RateControls whether the queue shaper rate.
default: 500(Kbps)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.16 |
lcsQosPortShaperQueue4UnitControls the unit of measure for the queue shaper rate as kbps or Mbps.
range:
0:kbs
1:Mbps
default: 0(kbps)rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.17 |
lcsQosPortShaperQueue5EnableControls whether the queue shaper is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.18 |
lcsQosPortShaperQueue5RateControls whether the queue shaper rate.
default: 500(Kbps)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.19 |
lcsQosPortShaperQueue5UnitControls the unit of measure for the queue shaper rate as kbps or Mbps.
range:
0:kbs
1:Mbps
default: 0(kbps)rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.20 |
lcsQosPortShaperQueue6EnableControls whether the queue shaper is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.21 |
lcsQosPortShaperQueue6RateControls whether the queue shaper rate.
default: 500(Kbps)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.22 |
lcsQosPortShaperQueue6UnitControls the unit of measure for the queue shaper rate as kbps or Mbps.
range:
0:kbs
1:Mbps
default: 0(kbps)rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.23 |
lcsQosPortShaperQueue7EnableControls whether the queue shaper is enabled on this switch port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.24 |
lcsQosPortShaperQueue7RateControls whether the queue shaper rate.
default: 500(Kbps)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.25 |
lcsQosPortShaperQueue7UnitControls the unit of measure for the queue shaper rate as kbps or Mbps.
range:
0:kbs
1:Mbps
default: 0(kbps)rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.26 |
lcsQosPortShaperEnableControls whether the port shaper is enabled.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.27 |
lcsQosPortShaperRateControls the rate for the port shaper.
default: 500 kbps.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.28 |
lcsQosPortShaperRateTypeThe rate type of the port shaper.
0:Line
1:Datarw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.16.1.1.29 |
lcsQosPortSchedulers OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17 |
lcsQosPortSchedulersTableINDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSQosPortSchedulersEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1 |
lcsQosPortSchedulersEntryThe Qos Port Shaper Entry. LCSQosPortSchedulersEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1 |
lcsQosPortSchedulersMode0:Strict Priority
8:Weightedrw Integer32(0|8) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.2 |
lcsQosPortSchedulersQ0WeightControls the weight for this queue. This value is restricted to 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.3 |
lcsQosPortSchedulersQ1WeightControls the weight for this queue. This value is restricted to 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.4 |
lcsQosPortSchedulersQ2WeightControls the weight for this queue. This value is restricted to 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.5 |
lcsQosPortSchedulersQ3WeightControls the weight for this queue. This value is restricted to 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.6 |
lcsQosPortSchedulersQ4WeightControls the weight for this queue. This value is restricted to 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.7 |
lcsQosPortSchedulersQ5WeightControls the weight for this queue. This value is restricted to 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.8 |
lcsQosPortSchedulersQ6WeightControls the weight for this queue. This value is restricted to 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.9 |
lcsQosPortSchedulersQ7WeightControls the weight for this queue. This value is restricted to 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.10.1.17.1.1.10 |
lcsLoopProtection OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12 |
lcsLoopProtectionConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1 |
lcsLoopProtectionGlobalEnableConfigure loop protection mode.
0: disable,
1: enable,
default: disable.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.1 |
lcsLoopProtectionTranmisstionTimeConfigure loop protection transmit interval.
default: 5,
range: 1-10.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.2 |
lcsLoopProtectionShutdownTimeConfigure loop protection shutdown time.
default: 180,
range: 0-604800.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.3 |
lcsLoopProtectionConfigurationTableShow Loop Protection configurations. SEQUENCE OF LCSLoopProtectionConfigurationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.4 |
lcsLoopProtectionConfigurationEntry LCSLoopProtectionConfigurationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.4.1 |
lcsLoopProtectionConfPortport, range : 1 - port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.4.1.1 |
lcsLoopProtectionConfEnableConfigure loop protection port mode.
0: disable,
1: enable,
default: enable.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.4.1.2 |
lcsLoopProtectionConfActionConfigure loop protection port action.
0: Shutdown port,
1: Shutdown port and Log,
2: Log Only,
default: Shutdown port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.4.1.3 |
lcsLoopProtectionConfTxmodeConfigure loop protection port transmit mode.
0: disable,
1: enable,
default: enable.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.4.1.4 |
lcsLoopProtectionConfActPortConfigure loop protection act port.
0: Recipient port,
1: Source port,
2: Both,
default: Recipient port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.1.4.1.101 |
lcsLoopProtectionStatusTableShow Loop Protection Status. SEQUENCE OF LCSLoopProtectionStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2 |
lcsLoopProtectionStatusEntry LCSLoopProtectionStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1 |
lcsLoopProtectionStatusPortport, range : 1 - port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1.1 |
lcsLoopProtectionStatusActionThe currently configured port action.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1.2 |
lcsLoopProtectionStatusTransmitThe currently configured port transmit mode.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1.3 |
lcsLoopProtectionStatusLoopsThe number of loops detected on this port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1.4 |
lcsLoopProtectionStatusStatusThe current loop protection status of the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1.5 |
lcsLoopProtectionStatusLoopWhether a loop is currently detected on the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1.6 |
lcsLoopProtectionStatusTimeLastLoopThe time of the last loop event detected.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1.7 |
lcsLoopProtectionStatusActPortThe currently configured act port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.12.2.1.101 |
lcsPoe OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13 |
lcsPoeStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1 |
lcsPoeStatusTableConfigure PoE Scheduling Table. SEQUENCE OF LCSPoeStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1 |
lcsPoeStatusEntry LCSPoeStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1 |
lcsPoeStatusLocalPortLocal port Index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1.1 |
lcsPoeStatusPDclassIndicates the QCL user.
0: Max. power 15.4 W,
1: Max. power 4.0 W,
2: Max. power 7.0 W,
3: Max. power 15.4 W,
4: Max. power 30.0 W.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1.2 |
lcsPoeStatusPowerRequestedThe Power Requested shows the requested amount of power the PD wants to be reserved.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1.3 |
lcsPoeStatusPowerAllocatedThe Power Allocated shows the amount of power the switch has allocated for the PD.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1.4 |
lcsPoeStatusPowerUsedThe Power Used shows how much power the PD currently is using.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1.5 |
lcsPoeStatusCurrentUsedThe Power Used shows how much current the PD currently is using.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1.6 |
lcsPoeStatusPriorityThe Priority shows the port's priority configured by the user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1.7 |
lcsPoeStatusPortStatusThe Port Status shows the port's status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.1.1.8 |
lcsPoeStatusTotalTableConfigure PoE Scheduling Total Table. SEQUENCE OF LCSPoeStatusTotalEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.2 |
lcsPoeStatusTotalEntry LCSPoeStatusTotalEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.2.1 |
lcsPoeStatusSwitchIndexSwitch Index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.2.1.1 |
lcsPoeStatusTotalPowerRequestedTotal Power Requested.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.2.1.2 |
lcsPoeStatusTotalPowerAllocatedTotal Power allocated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.2.1.3 |
lcsPoeStatusTotalPowerUsedTotal Power Used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.2.1.4 |
lcsPoeStatusTotalCurrentUsedTotal Current Used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.1.2.1.5 |
lcsPoePowerDelay OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.2 |
lcsPoePowerDelayTableConfigure PoE Power Delay mode. SEQUENCE OF LCSPoePowerDelayEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.2.1 |
lcsPoePowerDelayEntry LCSPoePowerDelayEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.2.1.1 |
lcsPoePowerDelayPortport, range : 1 - port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.2.1.1.1 |
lcsPoePowerDelayModeTurn on / off the power delay function,
0: disable,
1: enable,
default: disable.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.2.1.1.2 |
lcsPoePowerDelayTimeset Delay Time,
default: 0,
range: 0-300 sec.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.2.1.1.3 |
lcsPoeAutoCheck OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3 |
lcsPoeAutoCheckPingCheckconnection between PoE port and power device.
0: disable,
1: enable,
default: disable.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.1 |
lcsPoeAutoCheckTableConfigure PoE Auto check mode. SEQUENCE OF LCSPoeAutoCheckEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2 |
lcsPoeAutoCheckEntry LCSPoeAutoCheckEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1 |
lcsPoeAutoCheckPortport, range : 1 - port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.1 |
lcsPoeAutoCheckPingIPAddressIP Address the system should ping.
default: 0.0.0.0 .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.2 |
lcsPoeAutoCheckStartupTimeWhen PD has been start up, the Switch will wait Start up time to do PoE Auto Checking. default: 60, range: 30-600 sec.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.3 |
lcsPoeAutoCheckIntervalTimeDevice will send checking message to PD each interval time.
default: 30,
range: 10-120 sec.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.4 |
lcsPoeAutoCheckRetryTimeIt will retry to send detection again.
default: 3,
range: 1-5.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.5 |
lcsPoeAutoCheckFailureLogFailure loggings counter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.6 |
lcsPoeAutoCheckFailureActionIt will retry to send detection again,
0: Nothing,
1: Reboot Remote PD,
default: Nothing.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.7 |
lcsPoeAutoCheckRebootTimeWhen PD has been rebooted, the PoE port restored power after the specified time.
default: 15,
range: 3-120 sec.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.8 |
lcsPoeAutoCheckMaxRebootTimesWhen Failure Action is Reboot Remote PD, it limits times of Reboot.
default: 3,
range: 0-10. 0 means without reboot limits.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.3.2.1.10 |
lcsPoeScheduling OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.4 |
lcsPoeSchedulingProfileNumberSpecify the PoE Profile Number that want to configure. Range:1-16rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.4.1 |
lcsPoeSchedulingPorofileNameProfile Name. Maximum length:32.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.4.2 |
lcsPoeSchedulingTimeTableShow Poe Scheduling Time Config. SEQUENCE OF LCSPoeSchedulingTimeEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.4.3 |
lcsPoeSchedulingTimeEntry LCSPoeSchedulingTimeEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.4.3.1 |
lcsPoeSchedulingTimeWeekIndexWeek Index.
1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.4.3.1.1 |
lcsPoeSchedulingTimeStartTimeHourMinutePoE Scheduling Start Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.4.3.1.2 |
lcsPoeSchedulingTimeEndTimeHourMinutePoE Scheduling End Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.4.3.1.3 |
lcsPoeConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5 |
lcsPoeConfigurationPowerManagementModeThe power management mode for PoE port.
0: CLASS_RESERVED,
1: CLASS_CONSUMP,
2: ALLOCATED_RESERVED,
3: ALLOCATED_CONSUMP,
4: LLDPMED_RESERVED,
5: LLDPMED_CONSUMP,
default: CLASS_RESERVED.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.1 |
lcsPoeConfigurationLegacyPDDetectionThe capacitor detection mode.
0: Disable
1: Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.2 |
lcsPoeConfigurationTableConfigure PoE Configuration mode. SEQUENCE OF LCSPoeConfigurationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.4 |
lcsPoeConfigurationEntry LCSPoeConfigurationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.4.1 |
lcsPoeConfigurationSwitchswitch index, range : 1 - 16. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.4.1.1 |
lcsPoeConfigurationPoEFirmwareVersionPoE Firmware Version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.4.1.2 |
lcsPoeConfigurationPrimaryPowerSupplyIt must be defined what amount of power the primary and backup power sources
can deliver.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.4.1.3 |
lcsPoeConfigurationPortTableConfigure PoE Port Configuration mode. SEQUENCE OF LCSPoeConfigurationPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5 |
lcsPoeConfigurationPortEntry LCSPoeConfigurationPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1 |
lcsPoeConfigurationPortport, range : 1 - port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1.1 |
lcsPoeConfigurationPortPoEModeThe PoE Mode represents the PoE operating mode for the port.
0: Disable,
1: Enable,
2: 4-Pair 60W,
3: 4-Pair 90W,
4: 802.3bt,
default: Enable.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1.2 |
lcsPoeConfigurationPortPriorityThe Priority represents the ports priority. There are three levels of power priority named Low, High and Critical.
0: Low,
1: High,
2: Critical,
default: Low.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1.3 |
lcsPoeConfigurationPortMaximumPowerThe Maximum Power value contains a numerical value that indicates the maximum
power in watts that can be delivered to a remote device.
max: 30[W].rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1.4 |
lcsPoeConfigurationPortDetectionThe Detection represents the PoE capacitor detection for the port.
-1:Not support.
1:Legacy : Legacy capacitive detection only.
2:4-point : IEEE 802.3af 4-point detection only.
3:4-point-legacy : IEEE 802.3af 4-point detection followed by Legacy detection.
4:2-point : IEEE 802.3af 2-point detection only.
5:2-point-legacy : IEEE 802.3af 2-point detection followed by Legacy detection.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1.5 |
lcsPoeConfigurationPortPoEScheduleByProfileNameSpecify a valid PoE schedule profile by profile name. disabled: disable profile schedule.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1.7 |
lcsPoeConfigurationPortDelayModeTurn on off the power delay function.
0: Disable
1: Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1.8 |
lcsPoeConfigurationPortDelayTimeWhen rebooting, the PoE port will start to provide power to the PD when it out of delay time.
Range:0-300rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.5.5.1.9 |
lcsPoeChipsetRebootSchedule OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.6 |
lcsPoeChipsetRebootModePoE Chipset Reboot Mode
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.6.1 |
lcsPoeChipsetRebootTimeTableConfigure PoE Chipset Reboot Time. SEQUENCE OF LCSPoeChipsetRebootTimeEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.6.2 |
lcsPoeChipsetRebootTimeEntry LCSPoeChipsetRebootTimeEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.6.2.1 |
lcsPoeChipsetRebootWeekIndexPoE chipset reboot week index.
1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.6.2.1.1 |
lcsPoeChipsetRebootTimeHourPoE Chipset Reboot Time (Hour). Range: 0-23.
-1:disablerw Integer32 (-1..23) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.6.2.1.2 |
lcsPoeChipsetRebootTimeMinutePoE Chipset Reboot Time (Minute). Range:0,5,10,...,55.
-1:disablerw Integer32 (-1..55) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.13.6.2.1.3 |
lcsAAAMIB OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15 |
lcsAAA OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1 |
lcsRADIUS OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1 |
lcsRADIUSGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1 |
lcsRADIUSGlobalConfigTimeoutTimeout is the number of seconds, to wait for a reply
from a RADIUS server before retransmitting the request.
range: 1-1000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.1 |
lcsRADIUSGlobalConfigRetransmitRetransmit is the number of times,a RADIUS request is
retransmitted to a server that is not responding.If the
server has not responded after the last retransmit it is
considered to be dead.
range: 1-1000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.2 |
lcsRADIUSGlobalConfigDeadtimeThis will stop the switch from continually trying to
contact a server that it has already determined as dead.
range: 0-1440.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.3 |
lcsRADIUSGlobalConfigKeyThe secret key shared between the RADIUS server and
the switch.
On set sets the plain value as secret key, on get
only returns an encrypted value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.4 |
lcsRADIUSGlobalConfigNASIPv4The IPv4 address to be used as attribute 4 in RADIUS
Access-Request packets.
Setting 0.0.0.0 will disable this attribute.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.5 |
lcsRADIUSGlobalConfigNASIPv6The IPv6 address to be used as attribute 95 in RADIUS
Access-Request packets.
Leaving it blank will disable this attribute.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.6 |
lcsRADIUSGlobalConfigNASIdentifierThe identifier to be used as attribute 32 in RADIUS
Access-Request packets.
Leaving it blank will disable this attribute.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.7 |
lcsRADIUSGlobalConfigKeyHashedThe secret key shared between the RADIUS server and
the switch.
On set sets the value as encrypted secret key, on get
returns the encrypted value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.50 |
lcsRADIUSGlobalConfigKeyWriteThe secret key shared between the RADIUS server and
the switch.
On set sets the value as secret key, on get
always returns empty string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.51 |
lcsRADIUSMacformatTableThe RADIUS / NAS Mac Format Configuration Table. SEQUENCE OF LCSRADIUSMacformatEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.100 |
lcsRADIUSMacformatEntryThe RADIUS / NAS Mac Format Configuration Entry. LCSRADIUSMacformatEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.100.1 |
lcsRADIUSMacformatIndexThe Mac Format index.
1: Mac Format for the Called-Station Attribute
2: Mac Format for the Calling-Station Attribute
3: Mac Format for the Identity for Mac-Based Auth Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.100.1.1 |
lcsRADIUSMacformatGroupsizeThe Groupsize in which the Mac Address will be formatted.
1: x-x-x-x-x-x-x-x-x-x-x-x
2: xx-xx-xx-xx-xx-xx
4: xxxx-xxxx-xxxx
12: xxxxxxxxxxxxrw INTEGER(1|2|4|12) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.100.1.2 |
lcsRADIUSMacformatSeparatorThe Separator to use for separating the character groups.
0: Hypen (-)
1: Colon (:)
2: Dot (.)rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.100.1.3 |
lcsRADIUSMacformatCaseWhether to format the hex characters lowercase or uppercase.
0: Lowercase
1: Uppercaserw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.1.100.1.4 |
lcsRADIUSServerConfigTableThe RADIUS Server Configuration Table. SEQUENCE OF LCSRADIUSServerConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2 |
lcsRADIUSServerConfigEntryThe RADIUS Server Configuration Entry. LCSRADIUSServerConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1 |
lcsRADIUSServerConfServerNoThe RADIUS server number.
max: 5. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.1 |
lcsRADIUSServerConfHostnameThe IP address or hostname of the RADIUS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.2 |
lcsRADIUSServerConfAuthPortThe UDP port to use on the RADIUS server for
authentication.
range: 0-65535.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.3 |
lcsRADIUSServerConfAcctPortThe UDP port to use on the RADIUS server for accounting.
range: 0-65535.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.4 |
lcsRADIUSServerConfTimeoutThis optional setting overrides the global timeout value.
Setting to 0 will use the global timeout value.
range: 1-1000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.5 |
lcsRADIUSServerConfRetransmitThis optional setting overrides the global retransmit value.
Setting to 0 will use the global retransmit value.
range: 1-1000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.6 |
lcsRADIUSServerConfKeyThis optional setting overrides the global key. Leaving
it blank will use the global key.
On set sets the plain value as secret key, on get
only returns an encrypted value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.7 |
lcsRADIUSServerConfRowStatusThis object indicates the status of this entry, and is
used to create/delete entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.8 |
lcsRADIUSServerConfKeyHashedThis optional setting overrides the global key. Leaving
it blank will use the global key.
On set sets the value as encrypted secret key, on get
returns the encrypted value.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.50 |
lcsRADIUSServerConfKeyWriteThis optional setting overrides the global key. Leaving
it blank will use the global key.
On set sets the value as secret key, on get
always returns empty string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.2.1.51 |
lcsRADIUSDetailTableThe RADIUS Detail Table. SEQUENCE OF LCSRADIUSDetailEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3 |
lcsRADIUSDetailEntryThe RADIUS Detail Entry. LCSRADIUSDetailEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1 |
lcsRADIUSAuthIPAddressIP address and UDP port for the authentication
server in question.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.2 |
lcsRADIUSAuthStatusShows the state of the server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.3 |
lcsRADIUSAuthRoundTripTimeThe time interval (measured in milliseconds) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that matched it from the RADIUS
authentication server.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.4 |
lcsRADIUSAuthRxAccessAcceptThe number of RADIUS Access-Accept packets
(valid or invalid) received from the server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.5 |
lcsRADIUSAuthRxAccessRejectThe number of RADIUS Access-Reject packets
(valid or invalid) received from the server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.6 |
lcsRADIUSAuthRxAccessChallengeThe number of RADIUS Access-Challenge packets
(valid or invalid) received from the server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.7 |
lcsRADIUSAuthRxAccessResponseThe number of malformed RADIUS Access-Response
packets received from the server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.8 |
lcsRADIUSAuthRxBadAuthThe number of RADIUS Access-Response packets containing
invalid authenticators or Message Authenticator
attributes received from the server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.9 |
lcsRADIUSAuthRxUnknownTypeThe number of RADIUS packets that were received with
unknown types from the server on the authentication
port and dropped.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.10 |
lcsRADIUSAuthRxPacketsDroppedThe number of RADIUS packets that were received from
the server on the authentication port and dropped for
some other reason.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.11 |
lcsRADIUSAuthTxAccessRequestThe number of RADIUS Access-Request packets sent to
the server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.12 |
lcsRADIUSAuthTxAccessRetransmissionThe number of RADIUS Access-Request packets
retransmitted to the RADIUS authentication server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.13 |
lcsRADIUSAuthTxPendingRequestThe number of RADIUS Access-Request packets destined
for the server that have not yet timed out or received
a response.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.14 |
lcsRADIUSAuthTxTimeoutThe number of authentication timeouts to the server.
After a timeout, the client may retry to the same server,
send to a different server, or give up.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.15 |
lcsRADIUSAccountIPAddressIP address and UDP port for the authentication server
in question.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.16 |
lcsRADIUSAccountStatusShows the state of the server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.17 |
lcsRADIUSAccountRoundTripTimeThe time interval (measured in milliseconds) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that matched it from the RADIUS
authentication server.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.18 |
lcsRADIUSAccountRxResponsesThe number of RADIUS packets (valid or invalid)
received from the server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.19 |
lcsRADIUSAccountRxMalformedResponseThe number of malformed RADIUS packets received from
the server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.20 |
lcsRADIUSAccountRxBadAuthThe number of RADIUS packets containing invalid
authenticators received from the server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.21 |
lcsRADIUSAccountRxUnknownTypeThe number of RADIUS packets of unknown types that were
received from the server on the accounting port.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.22 |
lcsRADIUSAccountRxPacketsDropThe number of RADIUS packets that were received from
the server on the accounting port and dropped for some
other reason.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.23 |
lcsRADIUSAccountTxRequestThe number of RADIUS packets sent to the server.
This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.24 |
lcsRADIUSAccountTxRetransmissionThe number of RADIUS packets retransmitted to the RADIUS
accounting server.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.25 |
lcsRADIUSAccountTxPendingRequestThe number of RADIUS packets destined for the server
that have not yet timed out or received a response.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.26 |
lcsRADIUSAccountTxTimeoutThe number of accounting timeouts to the server.
After a timeout, the client may retry to the same
server, send to a different server, or give up.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.27 |
lcsRADIUSDetailClearCmdClears the counters for the selected server.ro ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.1.3.1.28 |
lcsTACACS OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2 |
lcsTACACSGlobalConfigTimeoutTimeout is the number of seconds,to wait for a reply
from a TACACS+ server before it is considered to be dead.
range: 1-1000 seconds,
default: 5 seconds.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.1 |
lcsTACACSGlobalConfigDeadtimeThe period during which the switch will not send new
requests to a server that has failed to respond to a
previous request. This will stop the switch from
continually trying to contact a server that it has
already determined as dead.
range: 0-1440 minutes,
default: 0 minutes.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.2 |
lcsTACACSGlobalConfigKeyThe secret key shared between the TACACS+ server and
the switch.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.3 |
lcsTACACSServerConfigTableThe TACACS Server configuration Table. SEQUENCE OF LCSTACACSServerConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.4 |
lcsTACACSServerConfigEntryThe TACACS Server configuration Entry. LCSTACACSServerConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.4.1 |
lcsTACACSServerConfigServerNoThe TACACS server number.
max: 5. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.4.1.1 |
lcsTACACSServerConfigHostnameThe IP address or hostname of the TACACS+ server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.4.1.2 |
lcsTACACSServerConfigPortThe TCP port to use on the TACACS+ server for
authentication.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.4.1.3 |
lcsTACACSServerConfigTimeoutThis optional setting overrides the global timeout
value. Leaving it blank will use the global timeout
value.
range: 1-1000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.4.1.4 |
lcsTACACSServerConfigKeyThis optional setting overrides the global key.
Leaving it blank will use the global key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.4.1.5 |
lcsTACACSServerConfigRowStatusThis object indicates the status of this entry, and is
used to create/delete entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.15.1.2.4.1.6 |
lcsNasMIB OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16 |
lcsNAS OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1 |
lcsNASConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1 |
lcsNASConfModeIndicates if NAS is globally enabled or disabled on
the switch.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.1 |
lcsNASConfReauthenticationEnabledIf enable, successfully authenticated supplicants/clients
are reauthenticated after the interval specified by the
Reauthentication Period.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.2 |
lcsNASConfReauthenticationPeriodDetermines the period, in seconds, after which a
connected client must be reauthenticated.
default: 3600 sec,
range: 1-3600 sec.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.3 |
lcsNASConfEAPOLTimeoutDetermines the time for retransmission of Request
Identity EAPOL frames.
default: 30 sec,
range: 1-65535 sec.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.4 |
lcsNASConfAgingPeriodWhen the NAS module uses the Port Security module to
secure MAC addresses, the Port Security module needs to
check for activity on the MAC address in question at regular
intervals and free resources if no activity is seen within
a given period of time.
default: 300 sec,
0: no support.
range: 0,10-1000000 sec.rw Integer32(0|10..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.5 |
lcsNASConfHoldTimeIf a client is denied access - either because the RADIUS
server denies the client access or because the RADIUS server
request times out - the client is put on hold in the
Unauthorized state.
default: 10 sec,
0: no support.
range: 0,10-1000000 sec.rw Integer32(0|10..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.6 |
lcsNASConfRADIUSQoSEnabledRADIUS-assigned QoS provides a means to centrally control
the traffic class to which traffic coming from a successfully
authenticated supplicant is assigned on the switch.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.7 |
lcsNASConfRADIUSVLANEnabledRADIUS-assigned VLAN provides a means to centrally control
the VLAN on which a successfully authenticated supplicant
is placed on the switch.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.8 |
lcsNASConfGuestVLANEnabledA Guest VLAN is a special VLAN - typically with limited
network access - on which 802.1X-unaware clients are placed
after a network administrator-defined timeout.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.9 |
lcsNASConfGuestVLANIDThis is the value that a port's Port VLAN ID is set to if
a port is moved into the Guest VLAN.
default: 1,
range: 1-4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.10 |
lcsNASConfMaxReauthCountThe number of times the switch transmits an EAPOL Request
Identity frame without response before considering entering
the Guest VLAN is adjusted with this setting.
default: 2,
range: 1-255.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.11 |
lcsNASConfAllowGuestVLANThe switch remembers if an EAPOL frame has been received
on the port for the life-time of the port.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.12 |
lcsNASPortConfTableThe NAS Port Configuration Table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSNASPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13 |
lcsNASPortConfEntryThe NAS Port Configuration Entry. LCSNASPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1 |
lcsNASPortConfAdminStateThis selection controls the port's authentication mode.
0: Force Authorized,
1: Force Unauthorized,
2: Port-based 802.1X,
3: Single 802.1X,
4: Multi 802.1X,
5: MAC-based Auth,
6: MAC-based Single Auth.
range: 0-6.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1.2 |
lcsNASPortConfRADIUSQoSEnabledWhen RADIUS-Assigned QoS is both globally enabled and
enabled on a given port, the switch reacts to QoS Class
information carried in the RADIUS Access-Accept packet
transmitted by the RADIUS server when a supplicant is
successfully authenticated.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1.3 |
lcsNASPortConfRADIUSVLANEnabledWhen RADIUS-Assigned VLAN is both globally enabled and
enabled for a given port, the switch reacts to VLAN ID
information carried in the RADIUS Access-Accept packet
transmitted by the RADIUS server when a supplicant is
successfully authenticated.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1.4 |
lcsNASPortConfGuestVLANEnabledWhen Guest VLAN is both globally enabled and enabled for
a given port, the switch considers moving the port into
the Guest VLAN according to the rules.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1.5 |
lcsNASPortConfPortStateThe current state of the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1.6 |
lcsNASPortConfReauthenticateCmdSchedules a reauthentication whenever the quiet-period of
the port runs out (EAPOL-based authentication). For
MAC-based authentication, reauthentication will be attempted
immediately.The button only has effect for successfully
authenticated clients on the port and will not cause the
clients to get temporarily unauthorized.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1.7 |
lcsNASPortConfReinitializeCmdForces a reinitialization of the clients on the port and
thereby a reauthentication immediately. The clients will
transfer to the unauthorized state while the
reauthentication is in progress.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1.8 |
lcsNASPortConfFallbackEnabledWhen Fallback is enabled, the switch will take over the supplicants role
after max reauthentication count is reached and tries to authenticate the
client on its behalf as described for MAC-based Auth.
Admin State supported : Single and Multi 802.1X.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.13.1.101 |
lcsNASConfMacBasedUseEAPThe switch can do the RADIUS authentication on behalf of the client in the
MAC-based Auth. port authentication mode. It can either present itself as a
normal 802.1X client to the RADIUS Server and use EAP, supporting only the
MD5-Challenge, or alternativly can use plain RADIUS with username / passwort
authentification without EAP if this setting is disabled.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.1.101 |
lcsNASStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2 |
lcsNASSwitchStatusTableThe NAS Switch Status Table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSNASSwitchStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.1 |
lcsNASSwitchStatusEntryThe NAS Switch Status Entry. LCSNASSwitchStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.1.1 |
lcsNASSwitchStatusAdminStateThe port's current administrative state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.1.1.2 |
lcsNASSwitchStatusPortStateThe current state of the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.1.1.3 |
lcsNASSwitchStatusLastSourceThe source MAC address carried in the most recently
received EAPOL frame for EAPOL-based authentication,
and the most recently received frame from a new client
for MAC-based authentication.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.1.1.4 |
lcsNASSwitchStatusLastIDThe user name (supplicant identity) carried in the most
recently received Response Identity EAPOL frame for
EAPOL-based authentication, and the source MAC address
from the most recently received frame from a new client
for MAC-based authentication.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.1.1.5 |
lcsNASSwitchStatusQoSClassQoS Class assigned to the port by the RADIUS server
if enabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.1.1.6 |
lcsNASSwitchStatusPortVLANIDThe VLAN ID that NAS has put the port in.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.1.1.7 |
lcsNASPortCounterTableThe NAS Port Counter Table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSNASPortCounterEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2 |
lcsNASPortCounterEntryThe NAS Port Counter Entry. LCSNASPortCounterEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1 |
lcsNASReceiveEAPOLTotalThe number of valid EAPOL frames of any type that have
been received by the switch.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.2 |
lcsNASReceiveEAPOLResponseIDThe number of valid EAPOL Response Identity frames that
have been received by the switch.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.3 |
lcsNASReceiveEAPOLResponsesThe number of valid EAPOL response frames (other than
Response Identity frames) that have been received by
the switch.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.4 |
lcsNASReceiveEAPOLStartThe number of EAPOL Start frames that have been received
by the switch.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.5 |
lcsNASReceiveEAPOLLogoffThe number of valid EAPOL Logoff frames that have been
received by the switch.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.6 |
lcsNASReceiveEAPOLInvalidTypeThe number of EAPOL frames that have been received by
the switch in which the frame type is not recognized.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.7 |
lcsNASReceiveEAPOLInvalidLengthThe number of EAPOL frames that have been received
by the switch in which the Packet Body Length field
is invalid.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.8 |
lcsNASTransmitEAPOLTotalThe number of EAPOL frames of any type that have been
transmitted by the switch.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.9 |
lcsNASTransmitEAPOLRequestIDThe number of EAPOL Request Identity frames that have
been transmitted by the switch.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.10 |
lcsNASTransmitEAPOLRequestsThe number of valid EAPOL Request frames (other than
Request Identity frames) that have been transmitted
by the switch.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.11 |
lcsNASPortReceiveBackendServerAccessChallenges802.1X-based: Counts the number of times that the switch
receives the first request from the backend server following
the first response from the supplicant. Indicates that the
backend server has communication with the switch.
MAC-based:Counts all Access Challenges received from the
backend server for this port (left-most table).
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.12 |
lcsNASPortReceiveBackendServerOtherRequests802.1X-based: Counts the number of times that the switch
sends an EAP Request packet following the first to the
supplicant. Indicates that the backend server chose an
EAP-method.
MAC-based: Not applicable.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.13 |
lcsNASPortReceiveBackendServerAuthSuccesses802.1X- and MAC-based: Counts the number of times that
the switch receives a success indication.Indicates that
the supplicant has successfully authenticated to
the backend server.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.14 |
lcsNASPortReceiveBackendServerAuthFailures802.1X- and MAC-based:Counts the number of times that the
switch receives a failure message.This indicates that the
supplicant has not authenticated to the backend
server.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.15 |
lcsNASPortTransmitBackendServerResponses802.1X-based:Counts the number of times that the switch
attempts to send a supplicant's first response packet to
the backend server. Indicates the switch attempted
communication with the backend server. Possible
retransmissions are not counted.
MAC-based: Counts all the backend server packets sent from
the switch towards the backend server for a given port
(left-most table). Possible retransmissions are not
counted.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.16 |
lcsNASSupplicantInfoMACThe MAC address of the last supplicant.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.17 |
lcsNASSupplicantInfoVlanIDThe VLAN ID on which the last frame from the last
supplicant was received.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.18 |
lcsNASSupplicantInfoVersion802.1X-based:The protocol version number carried in
the most recently received EAPOL frame.
MAC-based: Not applicable.
-1: no support.ro Integer32(-1..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.19 |
lcsNASSupplicantInfoIdentity802.1X-based:The user name (supplicant identity) carried
in the most recently received Response Identity EAPOL frame.
MAC-based: Not applicable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.20 |
lcsNASPortCounterClearCmdClear the counters for the selected port.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.16.1.2.2.1.21 |
lcsMACConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17 |
lcsMAC OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1 |
lcsMACDisableAutomaticAgingDisable the automatic aging of dynamic entries.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.1 |
lcsMACAgingTimeConfigure aging time by entering a value here in seconds.
range: 10-1000000 seconds.
-1: Automatic Aging is disable.rw Integer32 (-1 | 10..1000000) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.2 |
lcsMACLearningTableThe mac learning table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSMACLearningEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.3 |
lcsMACLearningEntryThe mac learning entry. LCSMACLearningEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.3.1 |
lcsMACTableLearningauto(0) : Learning is done automatically as soon as a
frame with unknown SMAC is received.
disable(1): Disable, No learning is done.
secure(2) : Secure, Only static MAC entries are learned,
all other frames are dropped.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.3.1.2 |
lcsLearningDisabledVLANsThe Learning Disabled VLANsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.4 |
lcsMACStaticConfigTableThe static Mac config table. SEQUENCE OF LCSMACStaticConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.5 |
lcsMACStaticConfigEntryThe static Mac config entry. LCSMACStaticConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.5.1 |
lcsMACStaticConfigSwitchIndexSwitch Index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.5.1.1 |
lcsMACStaticConfigIndexThe static entries in the MAC table are shown in this table.
The static MAC table can contain 64 entries. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.5.1.2 |
lcsMACStaticConfigVIDThe VLAN ID of the entry.
range: 1-4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.5.1.3 |
lcsMACStaticConfigMACaddressThe MAC address of the entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.5.1.4 |
lcsMACStaticConfigPortListCheckmarks indicate which ports are members of the entry.
Check or uncheck as needed to
modify the entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.5.1.5 |
lcsMACStaticConfigRowStatusThis object indicates the status of this entry,
and is used to create/delete entries. Any
object in an entry of this table may be modified
while the value of the corresponding instance
of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.17.1.5.1.6 |
lcsSpanningTree OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18 |
lcsBridgeSettings OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1 |
lcsSTPProtocolVersion0:STP
2:RSTP
3:MSTPrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.1 |
lcsBridgePriorityBridge Priority, range: 0-61440, multiple of 4096.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.2 |
lcsBridgeForwardDelayBridge Forward Delay, range: 4-30 seconds.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.3 |
lcsBridgeMaxAgeBridge MaxAge, range:6-40 seconds.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.4 |
lcsBridgeMaxHopsBridge Max Hops, range:6-40 hops.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.5 |
lcsBridgetxHoldCountBridge Transmit Hold Count,range: 1-10 bpdu's per second.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.6 |
lcsBridgeBPDUFilterBridge BPD UFilter
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.7 |
lcsBridgeBPDUGuardBridge BPDU Guard
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.8 |
lcsBridgeerrorRecoveryDelayBridge error Recovery Delay
range:30-86400 seconds
0:disablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.9 |
lcsBridgeHelloTimeThe interval between sending STP BPDU's. Valid values are in the range 1 to 10 seconds,
default:2 seconds.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.1.10 |
lcsMSTIMapping OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.2 |
lcsConfigNameConfiguration Name, identify the VLAN to MSTI mappingrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.2.1 |
lcsConfigRevisionConfiguration Revision. range:0-65535rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.2.2 |
lcsMSTIMappingVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.3 |
lcsConfigMstiName1The list of VLANs mapped to the MSTI1.
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.3.1 |
lcsConfigMstiName2The list of VLANs mapped to the MSTI2.
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.3.2 |
lcsConfigMstiName3The list of VLANs mapped to the MSTI3.
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.3.3 |
lcsConfigMstiName4The list of VLANs mapped to the MSTI4.
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.3.4 |
lcsConfigMstiName5The list of VLANs mapped to the MSTI5.
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.3.5 |
lcsConfigMstiName6The list of VLANs mapped to the MSTI6.
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.3.6 |
lcsConfigMstiName7The list of VLANs mapped to the MSTI7.
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.3.7 |
lcsMSTIPriorities OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4 |
lcsCSTIPriorityCSTI Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4.1 |
lcsMSTI1PriorityMSTI1 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4.2 |
lcsMSTI2PriorityMSTI2 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4.3 |
lcsMSTI3PriorityMSTI3 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4.4 |
lcsMSTI4PriorityMSTI4 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4.5 |
lcsMSTI5PriorityMSTI5 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4.6 |
lcsMSTI6PriorityMSTI6 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4.7 |
lcsMSTI7PriorityMSTI7 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.4.8 |
lcsCISTPorts OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5 |
lcsCISTAggregatedEnableCIST Port Enable. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.1 |
lcsCISTAggregatedPathCostCIST Port Path Cost. range: 0-200000000. 0 is Auto.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.2 |
lcsCISTAggregatedPortPriorityCIST Port Priority. range: 0-240, multiple of 16.rw Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.3 |
lcsCISTAggregatedAdminEdgeCIST Port Admin Edge. range: 0-1.
0:Non-Edge
1:Edge.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.4 |
lcsCISTAggregatedAutoEdgeCIST Port Auto Edge. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.5 |
lcsCISTAggregatedrestrictedRoleCIST Port restricted Role. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.6 |
lcsCISTAggregatedrestrictedTcnCIST Port restricted Tcn. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.7 |
lcsCISTAggregatedbpduGuardCIST Port bpdu Guard. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.8 |
lcsCISTAggregatedPointToPointCIST Port Point To Point. range: 0-2.
0:Forced True
1:Forced False.
2:Autorw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.9 |
lcsCISTPortsTableCIST port table. SEQUENCE OF LCSCISTPortsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10 |
lcsCISTPortsEntryAn entry in the CIST Ports Table. LCSCISTPortsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1 |
lcsCISTPortIndexCIST Port Index. range: 1-53. 53 is Aggregated Port Configuration. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.1 |
lcsCISTPortEnableCIST Port Enable. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.2 |
lcsCISTPortPathCostCIST Port Path Cost. range: 0-200000000. 0 is Auto.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.3 |
lcsCISTPortPortPriorityCIST Port Priority. range: 0-240, multiple of 16.rw Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.4 |
lcsCISTPortAdminEdgeCIST Port Admin Edge. range: 0-1.
0:Non-Edge
1:Edge.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.5 |
lcsCISTPortAutoEdgeCIST Port Auto Edge. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.6 |
lcsCISTPortrestrictedRoleCIST Port restricted Role. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.7 |
lcsCISTPortrestrictedTcnCIST Port restricted Tcn. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.8 |
lcsCISTPortbpduGuardCIST Port bpdu Guard. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.9 |
lcsCISTPortPointToPointCIST Port Point To Point. range: 0-2.
0:Forced True
1:Forced False.
2:Autorw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.10 |
lcsCISTPortRootGuardCIST Port root guard. range: 0-1.
0:disable
1:enable.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.5.10.1.11 |
lcsMSTIPorts OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6 |
lcsMSTIAggregatedPortsTableA table of MSTI ports. SEQUENCE OF LCSMSTIAggregatedPortsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.1 |
lcsMSTIAggregatedPortsEntryAn entry in the MSTI ports Table. LCSMSTIAggregatedPortsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.1.1 |
lcsMSTIAggregatedPortsMSTIndexMST index, range:1-7 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.1.1.1 |
lcsMSTIAggregatedPortsPathCostMST Path Cost. range: 0-200000000. 0 is Auto.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.1.1.3 |
lcsMSTIAggregatedPortsPortPriorityMST Port Priority. range: 0-240, multiple of 16.rw Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.1.1.4 |
lcsMSTIPortsTableA table of MSTI ports. SEQUENCE OF LCSMSTIPortsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.2 |
lcsMSTIPortsEntryAn entry in the MSTI ports Table. LCSMSTIPortsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.2.1 |
lcsMSTIPortsMSTIndexMST index, range:1-7 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.2.1.1 |
lcsMSTIPortsPortIndexPort index, range 1-53, 53 is Aggregated Ports Configuration. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.2.1.2 |
lcsMSTIPortsPathCostMST Path Cost. range: 0-200000000. 0 is Auto.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.2.1.3 |
lcsMSTIPortsPortPriorityMST Port Priority. range: 0-240, multiple of 16.rw Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.18.6.2.1.4 |
lcsPrivateVLANs OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19 |
lcsPVLANMembershipTableA table of Private VLAN Membership. SEQUENCE OF LCSPVLANMembershipEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.1 |
lcsPVLANMembershipEntryAn entry in the private VLAN table. LCSPVLANMembershipEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.1.1 |
lcsPVLANMembershipIndexPVLAN membership index. Range:1-28. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.1.1.1 |
lcsPVLANIDPVLAN ID. Range:1-28.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.1.1.2 |
lcsPVLANMembersPVLAN Members. Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1',
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.1.1.3 |
lcsPVLANRowStatusPVLAN Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.1.1.4 |
lcsPVLANPortIsolationTableA table of Private VLAN Port Isolation. SEQUENCE OF LCSPVLANPortIsolationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.2 |
lcsPVLANPortIsolationEntryAn entry in the private VLAN table. LCSPVLANPortIsolationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.2.1 |
lcsPVLANPortIsolationIndexPVLAN Port Isolation Index. Range:1-28. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.2.1.1 |
lcsPVLANPortIsolationPortMembersPVLAN Port Isolation Port Members enable/disable. Range:0-1.
1:Port Isolation enable on that port.
0:Port Isolation disable on that port.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.19.2.1.2 |
lcssFlow OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20 |
lcssFlowVersionUniquely identifies the version and implementation of this MIB. The version string must have the following structure: <MIB Version>;<Organization>;<Software Revision> where: <MIB Version> must be '1.3', the version of this MIB.
<Organization> the name of the organization responsible for the agent implementation. <Revision> the specific software build of this agent.
As an example, the string '1.3;InMon Corp.;2.1.1' indicates that this agent implements version '1.2' of the SFLOW MIB, that
it was developed by 'InMon Corp.' and that the software build is '2.1.1'.
The MIB Version will change with each revision of the SFLOW MIB.
Management entities must check the MIB Version and not attempt to manage agents with MIB Versions greater than that for which
they were designed.
Note: The sFlow Datagram Format has an independent version number which may change independently from <MIB Version>.
<MIB Version> applies to the structure and semantics of the SFLOW MIB only.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.1 |
lcssFlowAgentAddressTypeThe address type of the address associated with this agent. Only ipv4 and ipv6 types are supported. ipv4:1, ipv6:2.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.2 |
lcssFlowAgentAddressThe IP address associated with this agent. In the case of a multi-homed agent, this should be the loopback address of the
agent. The sFlowAgent address must provide SNMP connectivity to the agent. The address should be an invariant that does not
change as interfaces are reconfigured, enabled, disabled, added or removed. A manager should be able to use the
sFlowAgentAddress as a unique key that will identify this agent over extended periods of time so that a history can
be maintained.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.3 |
lcssFlowRcvrTableA table of the receivers of sFlow information. SEQUENCE OF LCSSFlowRcvrEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4 |
lcssFlowRcvrEntryAttributes of an sFlow Receiver. LCSSFlowRcvrEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1 |
lcssFlowRcvrIndexIndex into sFlowReceiverTable. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.1 |
lcssFlowRcvrOwnerThe entity making use of this sFlowRcvrTable entry. The empty string indicates that the entry is currently unclaimed.
An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed before trying to claim it.
The entry is claimed by setting the owner string. The entry must be claimed before any changes can be made to other sampler
objects.
In order to avoid a race condition, the entity taking control of the sampler must set both the owner and a value for
sFlowRcvrTimeout in the same SNMP set request.
When a management entity is finished using the sampler, it should set the value of sFlowRcvrOwner back to unclaimed.
The agent must restore all other entities this row to their default values when the owner is set to unclaimed. It must
also free all other resources associated with this sFlowRcvrTable entry.
This mechanism provides no enforcement and relies on the cooperation of management entities in order to ensure that
competition for a receiver entry is fairly resolved.rw OwnerString (RMON-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.2 |
lcssFlowRcvrTimeoutThe time (in seconds) remaining before the sampler is released and stops sampling. When set, the owner establishes control
for the specified period. When read, the remaining time in the interval is returned.
A management entity wanting to maintain control of the sampler is responsible for setting a new value before the old one
expires.
When the interval expires, the agent is responsible for restoring all other entities in this row to their default
values. It must also free all other resources associated with this sFlowRcvrTable entry.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.3 |
lcssFlowRcvrMaximumDatagramSizeThe maximum number of data bytes that can be sent in a single sample datagram. The manager should set this value to avoid fragmentation of the sFlow datagrams.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.4 |
lcssFlowRcvrAddressTypeThe type of sFlowRcvrCollectorAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.5 |
lcssFlowRcvrAddressThe IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.6 |
lcssFlowRcvrPortThe destination port for sFlow datagrams.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.7 |
lcssFlowRcvrDatagramVersionThe version of sFlow datagrams that should be sent.
When set to a value not support by the agent, the agent should adjust the value to the highest supported value less than the
requested value, or return an SNMP bad value error if no such value exists.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.8 |
lcssFlowRcvrModesFlow mode.
0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.4.1.9 |
lcssFlowFsTableA table of the flow samplers within a device. SEQUENCE OF LCSSFlowFsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.5 |
lcssFlowFsEntryAttributes of a flow sampler. LCSSFlowFsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.5.1 |
lcssFlowFsDataSourcesFlowDataSource for this flow sampler. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.5.1.1 |
lcssFlowFsInstanceThe sFlow instance for this flow sampler. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.5.1.2 |
lcssFlowFsReceiverThe SFlowReceiver for this flow sampler.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.5.1.3 |
lcssFlowFsPacketSamplingRateThe statistical sampling rate for packet sampling from this source.
Set to N to sample 1/Nth of the packets in the monitored flows. An agent should choose its own algorithm to introduce variance
into the sampling so that exactly every Nth packet is not counted. A sampling rate of 1 counts all packets. A sampling
rate of 0 disables sampling.
The agent is permitted to have minimum and maximum allowable values for the sampling rate. A minimum rate lets the agent
designer set an upper bound on the overhead associated with sampling, and a maximum rate may be the result of hardware
restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the
sampling rate (again because of implementation considerations).
When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values
and has the closest achievable value.
When read, the agent must return the actual sampling rate it will be using (after the adjustments previously described). The
sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of
packets in the monitored flows.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.5.1.4 |
lcssFlowFsMaximumHeaderSizeThe maximum number of bytes that should be copied from a sampled packet. The agent may have an internal maximum and
minimum permissible sizes. If an attempt is made to set this value outside the permissible range then the agent should
adjust the value to the closest permissible value.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.5.1.5 |
lcssFlowFsTypeFlow Sample Type.
1:Rx
2:Tx
3:All.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.5.1.6 |
lcssFlowCpTableA table of the counter pollers within a device. SEQUENCE OF LCSSFlowCpEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.6 |
lcssFlowCpEntryAttributes of a counter poller. LCSSFlowCpEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.6.1 |
lcssFlowCpDataSourceIdentifies the source of the data for the counter poller. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.6.1.1 |
lcssFlowCpInstanceThe sFlowInstance for this counter poller. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.6.1.2 |
lcssFlowCpReceiverThe SFlowReciever associated with this counter poller.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.6.1.3 |
lcssFlowCpIntervalThe maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval
of 0 disables counter sampling.
The agent is permitted to have minimum and maximum allowable values for the counter polling interval. A minimum interval
lets the agent designer set an upper bound on the overhead associated with polling, and a maximum interval may be the
result of implementation restrictions (such as counter size). In addition not all values between the maximum and minimum may
be realizable as the sampling interval (again because of implementation considerations).
When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values
and has the closest achievable value.
When read, the agent must return the actual sampling interval it will be using (after the adjustments previously described).
The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number
of packets in the monitored flows.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.20.6.1.4 |
lcsLLDP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21 |
lcsLLDPConfTable SEQUENCE OF LCSLLDPConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1 |
lcsLLDPConfEntry LCSLLDPConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1 |
lcsLLDPIndexLLDP configuration index.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.1 |
lcsLLDPMode0:Disable
1:Tx only
2:Rx only
3:Enabledrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.2 |
lcsLLDPCDPAware0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.3 |
lcsLLDPTrap0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.4 |
lcsLLDPPortDescr0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.5 |
lcsLLDPSysName0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.6 |
lcsLLDPSysDescr0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.7 |
lcsLLDPSysCapa0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.8 |
lcsLLDPMgmtAddr0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.1.1.9 |
lcsLLDPMEDCoordinatesLocation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.2 |
lcsLLDPMEDLatitudeLatitude SHOULD be normalized to within 0-90 degrees with a maximum of 4 digits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.2.2 |
lcsLLDPMEDLatitudeDirection0:North
1:Southrw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.2.3 |
lcsLLDPMEDLongitudeLongitude SHOULD be normalized to within 0-180 degrees with a maximum of 4 digits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.2.4 |
lcsLLDPMEDLongitudeDirection0:East
1:Westrw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.2.5 |
lcsLLDPMEDAltitudeAltitude SHOULD be normalized to within -2097151.9 to 2097151.9 with a maximum of 1 digits.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.2.6 |
lcsLLDPMEDAltitudeType1:Meters
2:Floorsrw Integer32(1|2) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.2.7 |
lcsLLDPMEDMapDatumThe Map Datum is used for the coordinates given in these options:
1:WGS84
2:NAD83/NAVD88
3:NAD83/MLLWrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.2.8 |
lcsLLDPMEDCivicAddressLocation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4 |
lcsLLDPMEDCivicAddressLocationCountryCoderw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.2 |
lcsLLDPMEDCivicAddressLocationStateProvincerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.3 |
lcsLLDPMEDCivicAddressLocationCountyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.4 |
lcsLLDPMEDCivicAddressLocationCityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.5 |
lcsLLDPMEDCivicAddressLocationCityDistrictrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.6 |
lcsLLDPMEDCivicAddressLocationBlockNeighborhoodrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.7 |
lcsLLDPMEDCivicAddressLocationStreetrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.8 |
lcsLLDPMEDCivicAddressLocationLeadingStreetDirectionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.9 |
lcsLLDPMEDCivicAddressLocationTrailingStreetSuffixrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.10 |
lcsLLDPMEDCivicAddressLocationStreetSuffixrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.11 |
lcsLLDPMEDCivicAddressLocationHouseNorw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.12 |
lcsLLDPMEDCivicAddressLocationHouseNoSuffixrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.13 |
lcsLLDPMEDCivicAddressLocationLandmarkrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.14 |
lcsLLDPMEDCivicAddressLocationAdditionalLocationInforw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.15 |
lcsLLDPMEDCivicAddressLocationNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.16 |
lcsLLDPMEDCivicAddressLocationZipCoderw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.17 |
lcsLLDPMEDCivicAddressLocationBuildingrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.18 |
lcsLLDPMEDCivicAddressLocationApartmentrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.19 |
lcsLLDPMEDCivicAddressLocationFloorrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.20 |
lcsLLDPMEDCivicAddressLocationRoomNorw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.21 |
lcsLLDPMEDCivicAddressLocationPlaceTyperw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.22 |
lcsLLDPMEDCivicAddressLocationPostalCommunityNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.23 |
lcsLLDPMEDCivicAddressLocationPOBoxrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.24 |
lcsLLDPMEDCivicAddressLocationAdditionalCoderw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.4.25 |
lcsLLDPMEDPoliciesTable SEQUENCE OF LCSLLDPMEDPoliciesEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5 |
lcsLLDPMEDPoliciesEntry LCSLLDPMEDPoliciesEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1 |
lcsLLDPMEDPoliciesIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1.1 |
lcsLLDPMEDPoliciesPolicyIDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1.2 |
lcsLLDPMEDPoliciesApplicationType1:Voice
2:Voice Signalling
3:Guest Voice
4:Guest Voice Signalling
5:Softphone Voice
6:Video Conferencing
7:Streaming Video
8:Video Signallingrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1.3 |
lcsLLDPMEDPoliciesTag0:Untagged
1:Taggedrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1.4 |
lcsLLDPMEDPoliciesVLANIDRange:1-4094rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1.5 |
lcsLLDPMEDPoliciesL2PriorityRange:0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1.6 |
lcsLLDPMEDPoliciesDSCPRange:0-63rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1.7 |
lcsLLDPMEDPoliciesRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.5.1.8 |
lcsLLDPMEDPolicyPortConfTable SEQUENCE OF LCSLLDPMEDPolicyPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.6 |
lcsLLDPMEDPolicyPortConfEntry LCSLLDPMEDPolicyPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.6.1 |
lcsLLDPMEDPolicyPortConfPortIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.6.1.1 |
lcsLLDPMEDPolicyPortConf0:Disable
1:Enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.6.1.2 |
lcsLLDPMEDFastStartRepeatCountRange:1-10rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.7 |
lcsLLDPMEDEmergencyCallServicerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.21.8 |
lcsUDLD OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22 |
lcsUDLDPortConfigTable SEQUENCE OF LCSUDLDPortConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.1 |
lcsUDLDPortConfigEntry LCSUDLDPortConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.1.1 |
lcsUDLDPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.1.1.1 |
lcsUDLDPortModedefault: 0
0: disable
1: Normal
2: Aggressiverw Integer32 (0|1|2) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.1.1.2 |
lcsUDLDPortMessageIntervaldefault: 7, range: 7-90rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.1.1.3 |
lcsUDLDPortStatusTable SEQUENCE OF LCSUDLDPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.2 |
lcsUDLDPortStatusEntry LCSUDLDPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.2.1 |
lcsUDLDPortStatusPortPort index Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.2.1.1 |
lcsUDLDStatusAdminState0:disable
1:enablero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.2.1.2 |
lcsUDLDStatusDeviceIDLocalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.2.1.3 |
lcsUDLDStatusDeviceNameLocalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.2.1.4 |
lcsUDLDStatusBidirectionalStatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.2.1.5 |
lcsUDLDStatusPortSpecify port number for check neighbour statusrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.3 |
lcsUDLDPortNeighbourStatusTable SEQUENCE OF LCSUDLDPortNeighbourStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.4 |
lcsUDLDPortNeighbourStatusEntry LCSUDLDPortNeighbourStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.4.1 |
lcsUDLDNeighbourPortIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.4.1.1 |
lcsUDLDNeighbourStatusPortro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.4.1.2 |
lcsUDLDNeighbourStatusDeviceIdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.4.1.3 |
lcsUDLDNeighbourStatusLinkStatusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.4.1.4 |
lcsUDLDNeighbourStatusDeviceNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.22.4.1.5 |
lcsEPS OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23 |
lcsEPSTableA table of EPS. SEQUENCE OF LCSEPSEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1 |
lcsEPSEntry LCSEPSEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1 |
lcsEPSIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.1 |
lcsEpsIDEPS ID. Range:1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.2 |
lcsEpsDomainEPS Domain. Range:0.
0:Domain is Portrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.3 |
lcsEpsArchitectureEPS Architecture. Range:0-1.
0:Architecture is 1+1
1:Architecture is 1:1rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.4 |
lcsEpsWFlowThe working flow for the EPS.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.5 |
lcsEpsPFlowThe protecting flow for the EPSrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.6 |
lcsEpsWSFMEPThe working Signal Fail reporting MEP.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.7 |
lcsEpsPSFMEPThe protecting Signal Fail reporting MEP.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.8 |
lcsEpsAPSMEPThe APS PDU handling MEP.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.9 |
lcsEpsAlarmThere is an active alarm on the EPS.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.10 |
lcsEpsRowStatusEPS Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.1.1.11 |
lcsEpsConfigInstanceEpsIDSpecify EPS ID for table uesd.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.2 |
lcsEPSConfigInstanceEntry OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3 |
lcsEpsConfigInstanceProtectionTypeRange:0-1.
0:Unidirectional: EPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1.
1:Bidirectional: EPS in the two ends is selecting traffic from the same working/protecting flow. This requires APS enabled. This is mandatory for 1:1rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.2 |
lcsEpsConfigInstanceAPSRange:0-1.
0:disable
1:enable
The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.3 |
lcsEpsConfigInstanceRevertiveRange:0-1.
0:disable
1:enable
The revertive switching to working flow can be enabled/disabled.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.4 |
lcsEpsConfigInstanceWTRTimeThe Wait To Restore timing value to be used in revertive switching. Range is 1 to 720 seconds.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.5 |
lcsEpsConfigInstanceHoldOffTimeThe timing value to be used to make persistent check on Signal Fail before switching. This is in 100 ms. and the max value is 100 (10 sec).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.6 |
lcsEpsConfigInstanceCommand0:None
1:Clear
2:Lock Out
3:Forced switch
4:Manual switch P
5:Manual switch W
6:Exercise
7:Freeze
8:Lock Out Localrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.7 |
lcsEpsStatusProtectionStateEPS state according to State Transition Tables in G.8031.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.8 |
lcsEpsStatusWorkingFlowStateOK: State of working flow is ok
SF: State of working flow is Signal Fail
SD: State of working flow is Signal Degrade (for future use)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.9 |
lcsEpsStatusProtectingFlowStateOK: State of protecting flow is ok
SF: State of protecting flow is Signal Fail
SD: State of protecting flow is Signal Degrade (for future use)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.10 |
lcsEpsStatusTransmittedApsRequestThe transmitted APS according to State Transition Tables in G.8031.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.11 |
lcsEpsStatusTransmittedApsReSignalThe transmitted APS according to State Transition Tables in G.8031.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.12 |
lcsEpsStatusTransmittedApsBrSignalThe transmitted APS according to State Transition Tables in G.8031.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.13 |
lcsEpsStatusReceivedApsRequestThe received APS according to State Transition Tables in G.8031.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.14 |
lcsEpsStatusReceivedApsReSignalThe received APS according to State Transition Tables in G.8031.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.15 |
lcsEpsStatusReceivedApsBrSignalThe received APS according to State Transition Tables in G.8031.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.16 |
lcsEpsStatusArchitectureMismatchThe architecture indicated in the received APS does not match the locally configured.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.17 |
lcsEpsStatusAPSOnWorkingAPS is received on the working flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.18 |
lcsEpsStatusSwitchingIncompleteTraffic is not selected from the same flow instance in the two ends.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.19 |
lcsEpsStatusNoApsReceivedAPS PDU is not received from the other end.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.23.3.20 |
lcsERPS OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24 |
lcsERPSTableA table of ERPS. SEQUENCE OF LCSERPSEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1 |
lcsERPSEntry LCSERPSEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1 |
lcsErpsIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.1 |
lcsErpsIDERPS ID. Range:1-64.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.2 |
lcsErpsPort0This will create a Port 0 of the switch in the ring.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.3 |
lcsErpsPort1This will create Port 1 of the switch in the Ring.
As interconnected sub-ring will have only one ring port, Port 1 is configured as 0 for interconnected sub-ring.
0 in this field indicates that no Port 1 is associated with this instancerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.4 |
lcsErpsPort0APSMEPThe Port 0 APS PDU handling MEP.
Range: 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.5 |
lcsErpsPort1APSMEPThe Port 1 APS PDU handling MEP.
Range: 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.6 |
lcsErpsPort0SFMEPThe Port 0 Signal Fail reporting MEP.
Range: 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.7 |
lcsErpsPort1SFMEPThe Port 1 Signal Fail reporting MEP.
Range: 1-100.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.8 |
lcsErpsRingTypeType of Protecting ring. It can be either major ring or sub-ring.
0:Major
1:Subrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.9 |
lcsErpsInterconnectedNodeInterconnected Node indicates that the ring instance is interconnected.
0: not interconnected
1: interconnectedrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.10 |
lcsErpsVirtualChannel1: indicates it is a sub-ring with virtual channel.
0: indicates, sub-ring doesn't have virtual channel.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.11 |
lcsErpsMajorRingIDMajor ring group ID for the interconnected sub-ring.
Range:1-64rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.12 |
lcsErpsAlarmThere is an active alarm on the ERPS.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.13 |
lcsErpsRowStatusERPS Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.1.1.14 |
lcsErpsConfigInstanceErpsIDSpecify ERPS ID for ERPSConfigInstanceEntry and ErpsConfigInstanceVLANConfigTable uesd.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.2 |
lcsERPSConfigInstanceEntry OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3 |
lcsErpsConfigInstanceConfiguredDown: This ERPS is only created and has not yet been configured - is not active.
Up: This ERPS is configured - is active.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.2 |
lcsErpsConfigInstanceGuardTimeThe period of the guard timer can be configured in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms.
Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.3 |
lcsErpsConfigInstanceWTRTimeThe Wait To Restore timing value to be used in revertive switching.
The period of the WTR time can be configured by the operator in 1 minute steps between 5 and 12 minutes with a default value of 5 minutes.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.4 |
lcsErpsConfigInstanceHoldOffTimeThe timing value to be used to make persistent check on Signal Fail before switching.
The range of the hold off timer is 0 to 10 seconds in steps of 100 msrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.5 |
lcsErpsConfigInstanceVersionERPS Protocol Version - v1 or v2
1:v1
2:v2rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.6 |
lcsErpsConfigInstanceRevertive1:Revertive mode
0:Non-Revertive moderw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.7 |
lcsErpsConfigInstanceRPLRoleIt can be either RPL owner or RPL Neighbor.
0:None
1:RPL owner
2:RPL Neighbor
Please set RPLPort first.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.8 |
lcsErpsConfigInstanceRPLPortThis allows to select the east port or west port as the RPL block.
0:None
1:Port0
2:Port1
Please set RPLRole after specify RPLPort.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.9 |
lcsErpsConfigInstanceClearIf the owner has to be changed, then the clear check box allows to clear the RPL owner for that ERPS ring.
0: no clear
1: clearrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.10 |
lcsErpsConfigInstanceTopologyChange1: indicates that the topology changes in the sub-ring are propagated in the major ring.
0: indicates that the topology changes in the sub-ring are not propagated in the major ring.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.11 |
lcsErpsConfigInstanceCommand0:None
1:Manual Switch
2:Forced Switch
3:Clear
Please set InstancePort first.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.12 |
lcsErpsConfigInstancePort0:None
1:Port0
2:Port1
Please set InstanceCommand after specify InstancePort.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.13 |
lcsErpsStatusProtectionStateERPS state according to State Transition Tables in G.8032.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.14 |
lcsErpsStatusPort0OK: State of East port is ok
SF: State of East port is Signal Failro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.15 |
lcsErpsStatusPort1OK: State of West port is ok
SF: State of West port is Signal Failro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.16 |
lcsErpsStatusTransmitAPSThe transmitted APS according to State Transition Tables in G.8032.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.17 |
lcsErpsStatusPort0ReceiveAPSThe received APS on Port 0 according to State Transition Tables in G.8032.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.18 |
lcsErpsStatusPort1ReceiveAPSThe received APS on Port 1 according to State Transition Tables in G.8032.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.19 |
lcsErpsStatusWTRRemainingRemaining WTR timeout in milliseconds.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.20 |
lcsErpsStatusRPLUnblockedAPS is received on the working flow.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.21 |
lcsErpsStatusNoAPSReceivedRAPS PDU is not received from the other end.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.22 |
lcsErpsStatusPort0BlockStatusBlock status for Port 0 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.23 |
lcsErpsStatusPort1BlockStatusBlock status for Port 1 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.24 |
lcsErpsStatusFOPAlarmFailure of Protocol Defect(FOP) status:
FOP is not detected
FOP is detectedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.3.25 |
lcsErpsConfigInstanceVLANConfigTableA table of ERPS VLANConfig. SEQUENCE OF LCSErpsConfigInstanceVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.4 |
lcsErpsConfigInstanceVLANConfigEntry LCSErpsConfigInstanceVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.4.1 |
lcsErpsConfigInstanceVLANConfigIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.4.1.1 |
lcsErpsConfigInstanceVLANConfigVLANIDERPS VLAN Config ID. Range:1-4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.4.1.2 |
lcsErpsConfigInstanceVLANConfigRowStatusERPS VLAN Config Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.24.4.1.3 |
lcsVLANTranslation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25 |
lcsVLANTranslationPortTableA table of VLANTranslationPort. SEQUENCE OF LCSVLANTranslationPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.1 |
lcsVLANTranslationPortEntryAn entry in the VLANTranslationPort table. LCSVLANTranslationPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.1.1 |
lcsVLANTranslationPortIndexVLANTranslationPort index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.1.1.1 |
lcsVLANTranslationPortDefaultSet the switch port to use the default VLAN Translation Group.
1:set
0:not setrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.1.1.2 |
lcsVLANTranslationPortGroupIDThe VLAN Translation mappings are organized into Groups, identified by the Group ID.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.1.1.3 |
lcsVLANTranslationMappingTableA table of VLANTranslationMapping. SEQUENCE OF LCSVLANTranslationMappingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.2 |
lcsVLANTranslationMappingEntryAn entry in the VLANTranslationMapping table. LCSVLANTranslationMappingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.2.1 |
lcsVLANTranslationMappingIndexVLANTranslationMapping index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.2.1.1 |
lcsVLANTranslationMappingGroupIDThe VLAN Translation mappings are organized into Groups, identified by the Group ID.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.2.1.2 |
lcsVLANTranslationMappingVIDRange:1-4094rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.2.1.3 |
lcsVLANTranslationMappingTVIDRange:1-4094rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.2.1.4 |
lcsVLANTranslationMappingRowStatusVLANTranslationMapping Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.25.2.1.5 |
lcsMEP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26 |
lcsMEPTableA table of MEP. SEQUENCE OF LCSMEPEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1 |
lcsMEPEntryAn entry in the MEP table. LCSMEPEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1 |
lcsMEPIndexMEP Table index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.1 |
lcsMepInstancerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.2 |
lcsMepDomainrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.3 |
lcsMepModerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.4 |
lcsMepDirectionrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.5 |
lcsMepResidencePortrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.6 |
lcsMepLevelrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.7 |
lcsMepFlowInstancerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.8 |
lcsMepTaggedVIDrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.9 |
lcsMepEPSInstancero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.10 |
lcsMepThisMACro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.11 |
lcsMepAlarmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.12 |
lcsMepRowStatusMEP Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.1.1.13 |
lcsMepInstanceIDSpecify MEP Instance ID for the following item and table uesd.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.2 |
lcsMepInstanceConfEntry OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3 |
lcsMepInstanceConfLevelrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.2 |
lcsMepInstanceConfFormatrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.3 |
lcsMepInstanceConfDomainNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.4 |
lcsMepInstanceConfMEGidrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.5 |
lcsMepInstanceConfMEPidrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.6 |
lcsMepInstanceConfTaggedVIDrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.7 |
lcsMepInstanceConfSyslogrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.8 |
lcsMepInstanceConfcLevelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.9 |
lcsMepInstanceConfcMEGro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.10 |
lcsMepInstanceConfcMEPro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.11 |
lcsMepInstanceConfcAISro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.12 |
lcsMepInstanceConfcLCKro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.13 |
lcsMepInstanceConfcLoopro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.14 |
lcsMepInstanceConfcConfigro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.15 |
lcsMepInstanceConfcDEGro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.16 |
lcsMepInstanceConfcSSFro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.17 |
lcsMepInstanceConfaBLKro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.18 |
lcsMepInstanceConfaTSDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.19 |
lcsMepInstanceConfaTSFro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.3.20 |
lcsPeerMepConfTableA table of MEP. SEQUENCE OF LCSPeerMepConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4 |
lcsPeerMepConfEntry LCSPeerMepConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1 |
lcsPeerMepConfIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1.1 |
lcsPeerMepConfPeerMEPIDPeer MEP IDrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1.2 |
lcsPeerMepConfUnicastPeerMACrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1.3 |
lcsPeerMepConfcLOCrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1.4 |
lcsPeerMepConfcRDIrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1.5 |
lcsPeerMepConfcPeriodrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1.6 |
lcsPeerMepConfcPriorityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1.7 |
lcsPeerMepConfRowStatusPeer Mep Conf Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.4.1.8 |
lcsFunctionalConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5 |
lcsFunctionalConfContinuityCheckEnable0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.2 |
lcsFunctionalConfContinuityCheckPriorityrange:0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.3 |
lcsFunctionalConfContinuityCheckFrameRaterange:1-7
1: 300 f/sec
2: 100 f/sec
3: 10 f/sec
4: 1 f/sec
5: 6 f/min
6: 1 f/min
7: 6 f/hourrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.4 |
lcsFunctionalConfContinuityCheckTLV0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.5 |
lcsFunctionalConfAPSProtocolEnable0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.6 |
lcsFunctionalConfAPSProtocolPriorityrange:0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.7 |
lcsFunctionalConfAPSProtocolCast0: Unicast destination address
1: Multicast destination addressrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.8 |
lcsFunctionalConfAPSProtocolType1: Linear protection APS
2: Ring protection APSrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.9 |
lcsFunctionalConfAPSProtocolLastOctetrange:0-255rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.5.10 |
lcsTLVConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.6 |
lcsTLVConfOUIFirstrange:0-255rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.6.2 |
lcsTLVConfOUISecondrange:0-255rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.6.3 |
lcsTLVConfOUIThirdrange:0-255rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.6.4 |
lcsTLVConfSubTyperange:0-255rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.6.5 |
lcsTLVConfValuerange:0-255rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.6.6 |
lcsTLVConfStateTableTLV Conf State Table SEQUENCE OF LCSTLVConfStateEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7 |
lcsTLVConfStateEntryTLV Conf State Entry LCSTLVConfStateEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1 |
lcsTLVConfStateIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.1 |
lcsTLVConfStatePeerMEPIDPeer MEP IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.2 |
lcsTLVConfStateCCOrganizationSpecificOUIFirstThe last received first value in the OUI field.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.3 |
lcsTLVConfStateCCOrganizationSpecificOUISecondThe last received second value in the OS TLV OUI field.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.4 |
lcsTLVConfStateCCOrganizationSpecificOUIThirdThe last received third value in the OS TLV OUI field.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.5 |
lcsTLVConfStateCCOrganizationSpecificSubTypeThe last received value in the OS TLV Sub-Type field.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.6 |
lcsTLVConfStateCCOrganizationSpecificValueThe last received value in the OS TLV Value field.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.7 |
lcsTLVConfStateCCOrganizationSpecificLastRXOS TLV was received in the last received CCM PDU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.8 |
lcsTLVConfStateCCPortStatusValueThe last received value in the PS TLV Value field.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.9 |
lcsTLVConfStateCCPortStatusLastRXPS TLV was received in the last received CCM PDU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.10 |
lcsTLVConfStateCCInterfaceStatusValueThe last received value in the IS TLV Value field.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.11 |
lcsTLVConfStateCCInterfaceStatusLastRXIS TLV was received in the last received CCM PDU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.7.1.12 |
lcsLinkStateTracking0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.8 |
lcsFaultManagement OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9 |
lcsFaultMgmtLoopBackConfEnable0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.2 |
lcsFaultMgmtLoopBackConfDEI0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.3 |
lcsFaultMgmtLoopBackConfPriorityrange:0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.4 |
lcsFaultMgmtLoopBackConfCast0:Unicast destination address
1:Multicast destination addressrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.5 |
lcsFaultMgmtLoopBackConfPeerMEPThis is only used if the 'Unicast MAC' is configured to all zero.
The LBM unicast MAC will be taken from the 'Unicast Peer MAC' configuration of this peer.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.6 |
lcsFaultMgmtLoopBackConfUnicastMACThis is only used if NOT configured to all zero.
This will be used as the LBM PDU unicast MAC.
This is the only way to configure Loop Back to-wards a MIP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.7 |
lcsFaultMgmtLoopBackConfToSendThe number of LBM PDU to send in one loop test.
The value 0 indicate infinite transmission (test behaviour).
This is HW based LBM/LBR and Requires VOE.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.8 |
lcsFaultMgmtLoopBackConfSizeThe LBM frame size.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.9 |
lcsFaultMgmtLoopBackConfIntervalThe interval between transmitting LBM PDU.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.9.10 |
lcsFaultManagementState OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10 |
lcsFaultMgmtStateTransactionIDThe transaction id of the first LBM transmitted.
For each LBM transmitted the transaction id in the PDU is incremented.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10.1 |
lcsFaultMgmtStateTransmittedThe total number of LBM PDU transmitted.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10.2 |
lcsFaultMgmtStateTable SEQUENCE OF LCSFaultMgmtStateEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10.3 |
lcsFaultMgmtStateEntry LCSFaultMgmtStateEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10.3.1 |
lcsFaultMgmtStateIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10.3.1.1 |
lcsFaultMgmtStateReplyMACThe MAC of the replying MEP/MIP.
In case of multi-cast LBM, replies can be received from all peer MEP in the group.
This MAC is not shown in case of 'To Send' == 0.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10.3.1.2 |
lcsFaultMgmtStateReceivedThe total number of LBR PDU received from this 'Reply MAC'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10.3.1.3 |
lcsFaultMgmtStateOutOfOrderThe number of LBR PDU received from this 'Reply MAC' with incorrect 'Transaction ID'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.10.3.1.4 |
lcsFaultMgmtTestSignal OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11 |
lcsFaultMgmtTestSignalTxTest Signal based on transmitting TST PDU can be enabled/disabled.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.2 |
lcsFaultMgmtTestSignalRxTest Signal based on transmitting TST PDU can be enabled/disabled.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.3 |
lcsFaultMgmtTestSignalDEIThe DEI to be inserted as PCP bits in TAG (if any).
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.4 |
lcsFaultMgmtTestSignalPriorityThe priority to be inserted as PCP bits in TAG (if any).
Range:0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.5 |
lcsFaultMgmtTestSignalPeerMEPThe TST frame destination MAC will be taken from the 'Unicast Peer MAC' configuration of this peer.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.6 |
lcsFaultMgmtTestSignalRateThe TST frame transmission bit rate - in Mega bits pr. second.
Limit is 400 Mbps. This is the bit rate of a standard frame without any encapsulation.
If 1 Mbps rate is selected in a EVC MEP, the added tag will give a higher bitrate on the wire.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.7 |
lcsFaultMgmtTestSignalSizeThe TST frame size. This is entered as the wanted size (in bytes) of a un-tagged frame containing TST OAM PDU - including CRC (four bytes).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.8 |
lcsFaultMgmtTestSignalPatternThe 'empty' TST PDU has the size of 12 bytes.
In order to achieve the configured frame size a data TLV will be added with a pattern.
0:All Zero
1:All One
2:10101010rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.9 |
lcsFaultMgmtTestSignalSequenceNumber0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.11.10 |
lcsFaultMgmtTestSignalState OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.12 |
lcsFaultMgmtTestSignalStateTXFrameCountThe number of transmitted TST frames since last 'Clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.12.2 |
lcsFaultMgmtTestSignalStateRXFrameCountThe number of received TST frames since last 'Clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.12.3 |
lcsFaultMgmtTestSignalStateRXRateThe current received TST frame bit rate in Kbps.
This is calculated on a 1 s. basis, starting when first TST frame is received after 'Clear'.
The frame size used for this calculation is the first received after 'Clear'ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.12.4 |
lcsFaultMgmtTestSignalStateTestTimeThe number of seconds passed since first TST frame received after last 'Clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.12.5 |
lcsFaultMgmtTestSignalStateClearThis will clear all Test Signal State.
Transmission of TST frame will be restarted.
Calculation of 'Rx frame count', 'RX rate' and 'Test time' will be started when receiving first TST frame.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.12.6 |
lcsFaultMgmtClientConfigFlow OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13 |
lcsFaultMgmtClientConfigFlowTable SEQUENCE OF LCSFaultMgmtClientConfigFlowEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1 |
lcsFaultMgmtClientConfigFlowEntry LCSFaultMgmtClientConfigFlowEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1.1 |
lcsFaultMgmtClientConfigFlowIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1.1.1 |
lcsFaultMgmtClientConfigFlowDomainThe domain of the client layer flow.
Ranfew:0-6
0:Port
1:EVC
2:VLAN
3:MPLS_LINK
4:MPLS_TUNNEL
5:MPLS_PW
6:MPLS_LSPrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1.1.2 |
lcsFaultMgmtClientConfigFlowInstanceClient layer flow instance numbers.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1.1.3 |
lcsFaultMgmtClientConfigFlowLevelClient layer level - AIS and LCK PDU transmitted in this client layer flow will be on this level.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1.1.4 |
lcsFaultMgmtClientConfigFlowAISprioThe priority to be used when transmitting AIS in each client flow.
Priority resulting in highest possible PCP can be selected.
Range:0-7. 255 indicate highest possible is requestedrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1.1.5 |
lcsFaultMgmtClientConfigFlowLCKprioThe priority to be used when transmitting LCK in each client flow.
Priority resulting in highest possible PCP can be selected.
Range:0-7. 255 indicate highest possible is requestedrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1.1.6 |
lcsFaultMgmtClientConfigFlowRowStatusFaultMgmtClientConfigFlow Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.13.1.1.7 |
lcsFaultMgmtAISLOCK OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.14 |
lcsFaultMgmtAISEnableInsertion of AIS signal (AIS PDU transmission) in client layer flows, can be enable/disabled.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.14.2 |
lcsFaultMgmtAISFrameRateSelecting the frame rate of AIS PDU.
This is the inverse of transmission period as described in Y.1731.
1: 300 frames per second
2: 100 frames per second
3: 10 frames per second
4: 1 frames per second
5: 6 frames per minute
6: 1 frames per minute
7: 6 frames per hourrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.14.3 |
lcsFaultMgmtAISProtectionSelecting this means that the first 3 AIS PDU is transmitted as fast as possible - in case of using this for protection in the end point.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.14.4 |
lcsFaultMgmtLOCKEnableInsertion of LOCK signal (LCK PDU transmission) in client layer flows, can be enable/disabled.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.14.5 |
lcsFaultMgmtLOCKFrameRateSelecting the frame rate of LCK PDU. This is the inverse of transmission period as described in Y.1731.
1: 300 frames per second
2: 100 frames per second
3: 10 frames per second
4: 1 frames per second
5: 6 frames per minute
6: 1 frames per minute
7: 6 frames per hourrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.14.6 |
lcsPerformanceMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15 |
lcsDataSetEnableWhen enabled this MEP instance will contribute to the 'PM Data Set' gathered by the PM Session.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.2 |
lcsLossMeasurementEnableLoss Measurement based on transmitting/receiving CCM or LMM/LMR PDU can be enabled/disabled - see 'Ended'.
This is only valid with one Peer MEP configured.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.3 |
lcsLossMeasurementPriorityThe priority to be inserted as PCP bits in TAG (if any).
In case of enable of Continuity Check and Loss Measurement both implemented on SW based CCM, 'Priority' has to be the same.
range:0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.4 |
lcsLossMeasurementFrameRate1: 300 frames per second
2: 100 frames per second
3: 10 frames per second
4: 1 frames per second
5: 6 frames per minute
6: 1 frames per minute
7: 6 frames per hourrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.5 |
lcsLossMeasurementCast0: Unicast destination address
1: Multicast destination addressrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.6 |
lcsLossMeasurementEnded0: Single ended LM based on LMM/LMR or DM based on DMM/DMR
1: Dual ended LM based on CCM or DM based on 1DMrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.7 |
lcsLossMeasurementFLRIntervalThis is the interval in seconds where the Frame Loss Ratio is calculated.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.8 |
lcsLossMeasurementLossThresholdFar end loss threshold count is incremented if a loss measurement is above this threshold.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.9 |
lcsLossMeasurementStateTxro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.10 |
lcsLossMeasurementStateRxro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.11 |
lcsLossMeasurementStateNearEndLossCountThe accumulated near end frame loss count - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.12 |
lcsLossMeasurementStateFarEndLossCountThe accumulated far end frame loss count - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.13 |
lcsLossMeasurementStateNearEndLossRatioThe near end frame loss ratio calculated based on the near end frame loss count and far end frame transmitted - in the latest 'FLR Interval'.
The result is given in percent.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.14 |
lcsLossMeasurementStateFarEndLossRatioThe far end frame loss ratio calculated based on the far end frame loss count and near end frame transmitted - in the latest 'FLR Interval'.
The result is given in percent.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.15 |
lcsLossMeasurementStateClearSet of this check and save will clear the accumulated counters and restart ratio calculation.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.16 |
lcsLossMeasurementAvailabilityEnableEnable/disable of loss measurement availability.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.17 |
lcsLossMeasurementAvailabilityIntervalAvailability interval - number of measurements with same availability in order to change availability state.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.18 |
lcsLossMeasurementAvailabilityFLRThresholdAvailability frame loss ratio threshold in per mille.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.19 |
lcsLossMeasurementAvailabilityMaintenanceEnable/disable of loss measurement availability maintenance.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.20 |
lcsLossMeasurementAvailabilityStateNearAvailabilityCountNear end availability count.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.21 |
lcsLossMeasurementAvailabilityStateFarAvailabilityCountFar end availability count.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.22 |
lcsLossMeasurementAvailabilityStateNearUnavailabilityCountNear end unavailability count.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.23 |
lcsLossMeasurementAvailabilityStateFarUnavailabilityCountFar end unavailability count.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.24 |
lcsLossMeasurementAvailabilityStateNearStateNear end availability state.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.25 |
lcsLossMeasurementAvailabilityStateFarStateFar end availability state.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.26 |
lcsLossMeasurementHighLossIntervalEnableEnable/disable of loss measurement high loss interval.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.27 |
lcsLossMeasurementHighLossIntervalFLRThresholdHigh Loss Interval frame loss ratio threshold in per mille.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.28 |
lcsLossMeasurementHighLossIntervalConsecutiveIntervalHigh Loss Interval consecutive interval (number of measurements).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.29 |
lcsLossMeasurementHighLossIntervalStateNearCountNear end high loss interval count (number of measurements where availability state is available and FLR is above high loss interval FLR threshold.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.30 |
lcsLossMeasurementHighLossIntervalStateFarCountFar end high loss interval count (number of measurements where availability state is available and FLR is above high loss interval FLR threshold.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.31 |
lcsLossMeasurementHighLossIntervalStateNearConsecutiveCountNear end high loss interval consecutive count.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.32 |
lcsLossMeasurementHighLossIntervalStateFarConsecutiveCountFar end high loss interval consecutive count.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.33 |
lcsLossMeasurementSignalDegradeEnableEnable/disable of loss measurement signal degrade.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.34 |
lcsLossMeasurementSignalDegradeTXMinimumMinimum number of frames that must be transmitted in a measurement before frame loss ratio is tested against loss ratio threshold.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.35 |
lcsLossMeasurementSignalDegradeFLRThresholdSignal Degraded frame loss ratio threshold in per mille.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.36 |
lcsLossMeasurementSignalDegradeBadThresholdNumber of consecutive bad interval measurements required to set degrade state.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.37 |
lcsLossMeasurementSignalDegradeGoodThresholdNumber of consecutive good interval measurements required to clear degrade state.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.38 |
lcsDelayMeasurementEnableDelay Measurement based on transmitting 1DM/DMM PDU can be enabled/disabled.
Delay Measurement based on receiving and handling 1DM/DMR PDU is always enabled.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.39 |
lcsDelayMeasurementPriorityThe priority to be inserted as PCP bits in TAG (if any).
Range:0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.40 |
lcsDelayMeasurementCastSelection of 1DM/DMM PDU transmitted unicast or multicast.
The unicast MAC will be configured through 'Peer MEP'.
0: Unicast destination address
1: Multicast destination addressrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.41 |
lcsDelayMeasurementPeerMEPThis is only used if the 'Cast' is configured to Uni.
The 1DM/DMR unicast MAC will be taken from the 'Unicast Peer MAC' configuration of this peer.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.42 |
lcsDelayMeasurementEnded0:One-Way: One-Way Delay Measurement implemented on 1DM.
1:Two-Way: Two-Way Delay Measurement implemented on DMM/DMR.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.43 |
lcsDelayMeasurementTxMode0:Standardize: Y.1731 standardize way to transmit 1DM/DMR.
1:Proprietary: Vitesse proprietary way with follow-up packets to transmit 1DM/DMR.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.44 |
lcsDelayMeasurementCalcThis is only used if the 'Way' is configured to Two-way.
0:Round trip: The frame delay calculated by the transmitting and receiving timestamps of initiators.
Frame Delay = RxTimeb-TxTimeStampf
1:Flow: The frame delay calculated by the transmitting and receiving timestamps of initiators and remotes.
Frame Delay = (RxTimeb-TxTimeStampf)-(TxTimeStampb-RxTimeStampf)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.45 |
lcsDelayMeasurementGapThe gap between transmitting 1DM/DMM PDU in 10ms. The range is 10 to 65535.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.46 |
lcsDelayMeasurementCountThe number of last records to calculate. The range is 10 to 2000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.47 |
lcsDelayMeasurementUnitThe time resolution.
0:us
1:nsrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.48 |
lcsDelayMeasurementD2forD1Enable to use DMM/DMR packet to calculate one-way DM.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.49 |
lcsDelayMeasurementCounterOverflowActionThe action to counter when overflow happens.
0: Keep:When internal total delay counter overflow, DM is disabled automatically
1: Reset:When internal total delay counter overflow, counter is reset and DM continues runningrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.50 |
lcsDelayMeasurementStateOnewayTxThe accumulated transmit count - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.51 |
lcsDelayMeasurementStateOnewayRxThe accumulated receive count - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.52 |
lcsDelayMeasurementStateOnewayRxTimeoutThe accumulated receive timeout count for two-way only - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.53 |
lcsDelayMeasurementStateOnewayRxErrorThe accumulated receive error count - since last 'clear'.
This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.54 |
lcsDelayMeasurementStateOnewayAvDelayTotThe average total delay - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.55 |
lcsDelayMeasurementStateOnewayAvDelaylastNThe average delay of the last n packets - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.56 |
lcsDelayMeasurementStateOnewayDelayMinThe minimum delay - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.57 |
lcsDelayMeasurementStateOnewayDelayMaxThe maximum delay - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.58 |
lcsDelayMeasurementStateOnewayAvDelayVarTotThe average total delay variation - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.59 |
lcsDelayMeasurementStateOnewayAvDelayVarlastNThe average delay variation of the last n packets - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.60 |
lcsDelayMeasurementStateOnewayDelayVarMinThe minimum delay variation - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.61 |
lcsDelayMeasurementStateOnewayDelayVarMaxThe maximum delay variation - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.62 |
lcsDelayMeasurementStateOnewayOverflowThe number of counter overflow - since last 'clear'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.63 |
lcsDelayMeasurementStateFtoNTxThe accumulated transmit count - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.64 |
lcsDelayMeasurementStateFtoNRxThe accumulated receive count - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.65 |
lcsDelayMeasurementStateFtoNRxTimeoutThe accumulated receive timeout count for two-way only - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.66 |
lcsDelayMeasurementStateFtoNRxErrorThe accumulated receive error count - since last 'clear'.
This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.67 |
lcsDelayMeasurementStateFtoNAvDelayTotThe average total delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.68 |
lcsDelayMeasurementStateFtoNAvDelaylastNThe average delay of the last n packets - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.69 |
lcsDelayMeasurementStateFtoNDelayMinThe minimum delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.70 |
lcsDelayMeasurementStateFtoNDelayMaxThe maximum delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.71 |
lcsDelayMeasurementStateFtoNAvDelayVarTotThe average total delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.72 |
lcsDelayMeasurementStateFtoNAvDelayVarlastNThe average delay variation of the last n packets - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.73 |
lcsDelayMeasurementStateFtoNDelayVarMinThe minimum delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.74 |
lcsDelayMeasurementStateFtoNDelayVarMaxThe maximum delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.75 |
lcsDelayMeasurementStateFtoNOverflowThe number of counter overflow - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.76 |
lcsDelayMeasurementStateNtoFTxThe accumulated transmit count - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.77 |
lcsDelayMeasurementStateNtoFRxThe accumulated receive count - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.78 |
lcsDelayMeasurementStateNtoFRxTimeoutThe accumulated receive timeout count for two-way only - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.79 |
lcsDelayMeasurementStateNtoFRxErrorThe accumulated receive error count - since last 'clear'.
This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.80 |
lcsDelayMeasurementStateNtoFAvDelayTotThe average total delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.81 |
lcsDelayMeasurementStateNtoFAvDelaylastNThe average delay of the last n packets - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.82 |
lcsDelayMeasurementStateNtoFDelayMinThe minimum delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.83 |
lcsDelayMeasurementStateNtoFDelayMaxThe maximum delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.84 |
lcsDelayMeasurementStateNtoFAvDelayVarTotThe average total delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.85 |
lcsDelayMeasurementStateNtoFAvDelayVarlastNThe average delay variation of the last n packets - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.86 |
lcsDelayMeasurementStateNtoFDelayVarMinThe minimum delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.87 |
lcsDelayMeasurementStateNtoFDelayVarMaxThe maximum delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.88 |
lcsDelayMeasurementStateNtoFOverflowThe number of counter overflow - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.89 |
lcsDelayMeasurementStateTwowayTxThe accumulated transmit count - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.90 |
lcsDelayMeasurementStateTwowayRxThe accumulated receive count - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.91 |
lcsDelayMeasurementStateTwowayRxTimeoutThe accumulated receive timeout count for two-way only - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.92 |
lcsDelayMeasurementStateTwowayRxErrorThe accumulated receive error count - since last 'clear'.
This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.93 |
lcsDelayMeasurementStateTwowayAvDelayTotThe average total delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.94 |
lcsDelayMeasurementStateTwowayAvDelaylastNThe average delay of the last n packets - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.95 |
lcsDelayMeasurementStateTwowayDelayMinThe minimum delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.96 |
lcsDelayMeasurementStateTwowayDelayMaxThe maximum delay - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.97 |
lcsDelayMeasurementStateTwowayAvDelayVarTotThe average total delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.98 |
lcsDelayMeasurementStateTwowayAvDelayVarlastNThe average delay variation of the last n packets - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.99 |
lcsDelayMeasurementStateTwowayDelayVarMinThe minimum delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.100 |
lcsDelayMeasurementStateTwowayDelayVarMaxThe maximum delay variation - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.101 |
lcsDelayMeasurementStateTwowayOverflowThe number of counter overflow - since last 'clear'.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.102 |
lcsDelayMeasurementStateClearSet of this check and save will clear the accumulated counters.
1:clearrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.103 |
lcsDelayMeasurementBinsMeasurementBinsforFDConfigurable number of Frame Delay Measurement Bins per Measurement Interval.
range: 2-10rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.104 |
lcsDelayMeasurementBinsMeasurementBinsforIFDVConfigurable number of Inter-Frame Delay Variation Measurement Bins per Measurement Interval.
range: 2-10rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.105 |
lcsDelayMeasurementBinsMeasurementThresholdConfigurable the Measurement Threshold for each Measurement Bin.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.15.106 |
lcsPerformanceMonitorDelayMeasurementBinsforFDTable SEQUENCE OF LCSPerformanceMonitorDelayMeasurementBinsforFDEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.16 |
lcsPerformanceMonitorDelayMeasurementBinsforFDEntry LCSPerformanceMonitorDelayMeasurementBinsforFDEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.16.1 |
lcsPerformanceMonitorDelayMeasurementBinsforFDIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.16.1.1 |
lcsPerformanceMonitorDelayMeasurementBinsforFDOnewayro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.16.1.2 |
lcsPerformanceMonitorDelayMeasurementBinsforFDFtoNro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.16.1.3 |
lcsPerformanceMonitorDelayMeasurementBinsforFDNtoFro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.16.1.4 |
lcsPerformanceMonitorDelayMeasurementBinsforFDTwowayro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.16.1.5 |
lcsPerformanceMonitorDelayMeasurementBinsforIFDVTable SEQUENCE OF LCSPerformanceMonitorDelayMeasurementBinsforIFDVEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.17 |
lcsPerformanceMonitorDelayMeasurementBinsforIFDVEntry LCSPerformanceMonitorDelayMeasurementBinsforIFDVEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.17.1 |
lcsPerformanceMonitorDelayMeasurementBinsforIFDVIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.17.1.1 |
lcsPerformanceMonitorDelayMeasurementBinsforIFDVOnewayro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.17.1.2 |
lcsPerformanceMonitorDelayMeasurementBinsforIFDVFtoNro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.17.1.3 |
lcsPerformanceMonitorDelayMeasurementBinsforIFDVNtoFro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.17.1.4 |
lcsPerformanceMonitorDelayMeasurementBinsforIFDVTwowayro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.26.17.1.5 |
lcsPTP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28 |
lcsPTPExternalEnableThis Selection box will allow you to configure the External Clock output.
The following values are possible:
1. True : Enable the external clock output
0. False : Disable the external clock outputrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.1 |
lcsPTPAdjustMethodThis Selection box will allow you to configure the Frequency adjustment configuration.
0: LTC frequency : Select Local Time Counter (LTC) frequency control
1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE
2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW
3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.2 |
lcsPTPClockFrequencyThis will allow to set the Clock Frequency.
The possible range of values are 1 - 25000000 (1 - 25MHz)rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.3 |
lcsPTPClockConfTableA table of PTP Clock Conf. SEQUENCE OF LCSPTPClockConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.5 |
lcsPTPClockConfEntryAn entry in the PTP Clock Conf table. LCSPTPClockConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.5.1 |
lcsPTPClockConfIndexPTP Clock Conf index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.5.1.1 |
lcsPTPClockConfClockInstanceIndicates the Instance of a particular Clock Instance [0..3].rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.5.1.2 |
lcsPTPClockConfDeviceTypeIndicates the Type of the Clock Instance. There are five Device Types.
0: Inactive - passive clock instance
1: Ord-Bound - clock's Device Type is Ordinary-Boundary Clock.
2: P2p Transp - clock's Device Type is Peer to Peer Transparent Clock.
3: E2e Transp - clock's Device Type is End to End Transparent Clock.
4: Master Only - clock's Device Type is Master Only.
5: Slave Only - clock's Device Type is Slave Only.
6: Boundary Clock frontend clock instance, only 1-step, 1-way is supported.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.5.1.3 |
lcsPTPClockConfProfile0:No profile
1:1588
2:G8265.1
3:G8275.1rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.5.1.4 |
lcsPTPClockConfRowStatusPTP Clock Conf Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.5.1.5 |
lcsPTPClockInstanceSpecify the PTP clock instance for the following item used [0..3].rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.6 |
lcsPTPClockConfAndStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7 |
lcsPTPClockConfEntryClockInstancero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.2 |
lcsPTPClockConfEntryDeviceTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.3 |
lcsPTPClockConfEntryProfilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.4 |
lcsPTPClockConfEntryApplyProfileDefaults-1:n/a
0:normal state
1:apply profile defaultrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.5 |
lcsPTPClockConfEntryPTPTimeShows the actual PTP time with nanosecond resolution.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.6 |
lcsPTPClockConfEntryClockAdjustmentMethodShows the actual clock adjustment method. The method depends on the available hardware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.7 |
lcsPTPClockConfEntrySynchronizeToSystemClockActivate this button to synchronize the System Clock to PTP Time.
1:Synchronize to system clock.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.8 |
lcsPTPClockConfEntryClockCurrentDataSetstpRmSteps Removed : It is the number of PTP clocks traversed from the grandmaster to the local slave clock.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.9 |
lcsPTPClockConfEntryClockCurrentDataSetOffsetFromMasterTime difference between the master clock and the local slave clock, measured in ns.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.10 |
lcsPTPClockConfEntryClockCurrentDataSetMeanPathDelayThe mean propagation time for the link between the master and the local slave.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.11 |
lcsPTPClockConfEntryClockCurrentDataSetSlavePortShows which port is in slave mode. The value is 0 if no ports are in slave mode.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.12 |
lcsPTPClockConfEntryClockCurrentDataSetSlaveStateShows synchronization state of the slave.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.13 |
lcsPTPClockConfEntryClockCurrentDataSetHoldoverAfter the slave has been in Locked mode during the stabilization period,
this value shows the actual clock offset between the freerun and the actual holdover frequency,
the value is shown in parts pr billion (ppb).
During the stabilization period, the value is shown as N.A.
The stabilization period is 60 sec as default, it can be changed from the CLI interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.14 |
lcsPTPClockConfEntryClockParentDataSetParentPortIDClock identity for the parent clock, if the local clock is not a slave, the value is the clocks own id.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.15 |
lcsPTPClockConfEntryClockParentDataSetPortPort Id for the parent master portro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.16 |
lcsPTPClockConfEntryClockParentDataSetPStatParents Stats (always false).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.17 |
lcsPTPClockConfEntryClockParentDataSetVarIt is observed parent offset scaled log variancero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.18 |
lcsPTPClockConfEntryClockParentDataSetRateObserved Parent Clock Phase Change Rate. i.e. the slave clocks rate offset compared to the master.
(unit = ns per s).ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.19 |
lcsPTPClockConfEntryClockParentDataSetGrandMasterIDClock identity for the grand master clock, if the local clock is not a slave, the value is the clocks own id.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.20 |
lcsPTPClockConfEntryClockParentDataSetGrandMasterClockQualityThe clock quality announced by the grand master (See description of Clock Default DataSet:Clock Quality)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.21 |
lcsPTPClockConfEntryClockParentDataSetPri1Clock priority 1 announced by the grand masterro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.22 |
lcsPTPClockConfEntryClockParentDataSetPri2Clock priority 2 announced by the grand master.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.23 |
lcsPTPClockConfEntryClockDefaultDataSetClockIDAn internal instance id (0..3)ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.24 |
lcsPTPClockConfEntryClockDefaultDataSetDeviceTypeIndicates the Type of the Clock Instance. There are five Device Types.
1. Ord-Bound - Clock's Device Type is Ordinary-Boundary Clock.
2. P2p Transp - Clock's Device Type is Peer to Peer Transparent Clock.
3. E2e Transp - Clock's Device Type is End to End Transparent Clock.
4. Master Only - Clock's Device Type is Master Only.
5. Slave Only - Clock's Device Type is Slave Only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.25 |
lcsPTPClockConfEntryClockDefaultDataSet2StepFlagTrue if two-step Sync events and Pdelay_Resp events are used
0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.26 |
lcsPTPClockConfEntryClockDefaultDataSetPortsThe total number of physical ports in the nodero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.27 |
lcsPTPClockConfEntryClockDefaultDataSetClockIdentityIt shows unique clock identifierro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.28 |
lcsPTPClockConfEntryClockDefaultDataSetDomClock domain [0..127].rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.29 |
lcsPTPClockConfEntryClockDefaultDataSetClockQualityThe clock quality is determined by the system, and holds 3 parts: Clock Class, Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588.
The Clock Accuracy values are defined in IEEE1588 table 6 (Currently the clock Accuracy is set to 'Unknown' as default).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.30 |
lcsPTPClockConfEntryClockDefaultDataSetPri1Clock priority 1 [0..255] used by the BMC master select algorithm.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.31 |
lcsPTPClockConfEntryClockDefaultDataSetPri2Clock priority 2 [0..255] used by the BMC master select algorithm.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.32 |
lcsPTPClockConfEntryClockDefaultDataSetProtocol0:Ethernet
1:Ethernet Mixed
2:IP4Multi
3:IP4Mixed
4:IP4Uni
5:OAMrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.33 |
lcsPTPClockConfEntryClockDefaultDataSetOneWayIf true, one way measurements are used.
This parameter applies only to a slave.
In one-way mode no delay measurements are performed, i.e. this is applicable only if frequency synchronization is needed.
The master always responds to delay requests.
0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.34 |
lcsPTPClockConfEntryClockDefaultDataSetVLANTagEnableThe VLAN Tag Enable parameter is ignored, because the tagging is controlled by the VLAN configuration.
0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.35 |
lcsPTPClockConfEntryClockDefaultDataSetVIDTVLAN Identifier used for tagging the VLAN packets.
range:1-4094rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.36 |
lcsPTPClockConfEntryClockDefaultDataSetPCPPriority Code Point value used for PTP frames. range:0-7rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.37 |
lcsPTPClockConfEntryClockDefaultDataSetDSCPrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.38 |
lcsPTPClockConfEntryClockTimePropertiesDataSetUtcOffsetrange: 0-10000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.39 |
lcsPTPClockConfEntryClockTimePropertiesDataSetValid0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.40 |
lcsPTPClockConfEntryClockTimePropertiesDataSetLeap590:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.41 |
lcsPTPClockConfEntryClockTimePropertiesDataSetLeap610:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.42 |
lcsPTPClockConfEntryClockTimePropertiesDataSetTimeTrac0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.43 |
lcsPTPClockConfEntryClockTimePropertiesDataSetFreqTrac0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.44 |
lcsPTPClockConfEntryClockTimePropertiesDataSetPTPTimeScale0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.45 |
lcsPTPClockConfEntryClockTimePropertiesDataSetTimeSourcerange: 0-255rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.46 |
lcsPTPClockConfEntryFilterParametersFilterTypeShows the filter type used which can be either the basic filter or an advanced filter that can be configured to use only a fraction of the packets received
(i.e. the packets that have experienced the least latency).
0:BASICrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.47 |
lcsPTPClockConfEntryFilterParametersDelayFilterrange:0-6rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.48 |
lcsPTPClockConfEntryFilterParametersPeriodrange:1-10000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.49 |
lcsPTPClockConfEntryFilterParametersDistrange:1-10rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.50 |
lcsPTPClockConfEntryServoParametersDisplayIf true then Offset From Master, MeanPathDelay and clockAdjustment are logged on the debug terminal
0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.51 |
lcsPTPClockConfEntryServoParametersPEnableIf true the P part of the algorithm is included
0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.52 |
lcsPTPClockConfEntryServoParametersIEnableIf true the I part of the algorithm is included
0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.53 |
lcsPTPClockConfEntryServoParametersDEnableIf true the D part of the algorithm is included
0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.54 |
lcsPTPClockConfEntryServoParametersPConstantrange:0-1000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.55 |
lcsPTPClockConfEntryServoParametersIConstantrange:0-10000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.56 |
lcsPTPClockConfEntryServoParametersDConstantrange:0-1000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.7.57 |
lcsPTPClockPortDataSetConfTable SEQUENCE OF LCSPTPClockPortDataSetConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8 |
lcsPTPClockPortDataSetConfEntry LCSPTPClockPortDataSetConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1 |
lcsPTPClockPortDataSetConfPortIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.1 |
lcsPTPClockConfEntryPortConfEnable0:false
1:truerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.2 |
lcsPTPClockConfEntryPortConfStatDynamic member portState: Current state of the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.3 |
lcsPTPClockConfEntryPortConfMDRDynamic member log Min Delay Req Interval: The delay request interval announced by the master.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.4 |
lcsPTPClockConfEntryPortConfPeerMeanPathDelThe path delay measured by the port in P2P mode. In E2E mode this value is 0ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.5 |
lcsPTPClockConfEntryPortConfAnvThe interval for issuing announce messages in master state. Range is -3 to 4.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.6 |
lcsPTPClockConfEntryPortConfAToThe timeout for receiving announce messages on the port. Range is 1 to 10.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.7 |
lcsPTPClockConfEntryPortConfSyvThe interval for issuing sync messages in master. Range is -7 to 4.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.8 |
lcsPTPClockConfEntryPortConfDlmConfigurable member delayMechanism: The delay mechanism used for the port:
e2e End to end delay measurement
p2p Peer to peer delay measurement.
Can be defined per port in an Ordinary/Boundary clock.
In a transparent clock all ports use the same delay mechanism, determined by the clock type.
1:e2e
2:p2prw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.9 |
lcsPTPClockConfEntryPortConfMPRThe interval for issuing Delay_Req messages for the port in E2e mode. This value is announced from the master to the slave in an announce message. The value is reflected in the MDR field in the Slave
The interval for issuing Pdelay_Req messages for the port in P2P mode
Note: The interpretation of this parameter has changed from release 2.40. In earlier versions the value was interpreted relative to the Sync interval, this was a violation of the standard, so now the value is interpreted as an interval. I.e. MPR = 0 => 1 Delay_Req pr sec, independent of the Sync rate.
Range is -7 to 5.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.10 |
lcsPTPClockConfEntryPortConfDelayAsymmetryIf the transmission delay for a link in not symmetric, the asymmetry can be configured here, see IEEE 1588 Section 7.4.2 Communication path asymmetry
Range is -100000 to 100000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.11 |
lcsPTPClockConfEntryPortConfIngressLatencyIngress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2.
Range is -100000 to 100000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.12 |
lcsPTPClockConfEntryPortConfEgressLatencyEgress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2.
Range is -100000 to 100000.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.13 |
lcsPTPClockConfEntryPortConfVersionThe current implementation only supports PTP version 2ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.8.1.14 |
lcsPTPClockUnicastSlaveConfTable SEQUENCE OF LCSPTPClockUnicastSlaveConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.9 |
lcsPTPClockUnicastSlaveConfEntry LCSPTPClockUnicastSlaveConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.9.1 |
lcsPTPClockConfEntryUnicastSlaveConfIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.9.1.1 |
lcsPTPClockConfEntryUnicastSlaveConfDurationThe number of seconds a master is requested to send Announce/Sync messages.
The request is repeated from the slave each Duration/4 seconds.
range:10-1000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.9.1.2 |
lcsPTPClockConfEntryUnicastSlaveConfIPAddressIPv4 Address of the Master clockrw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.9.1.3 |
lcsPTPClockConfEntryUnicastSlaveConfGrantThe granted repetition period for the sync messagero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.9.1.4 |
lcsPTPClockConfEntryUnicastSlaveConfCommStateThe state of the communication with the master, possible values are:
IDLE : The entry is not in use.
INIT : Announce is sent to the master (Waiting for a response).
CONN : The master has responded.
SELL : The assigned master is selected as current master.
SYNC : The master is sending Sync messages.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.28.9.1.5 |
lcsETHLINKOAM OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29 |
lcsEthLinkOAMPortConfTable SEQUENCE OF LCSEthLinkOAMPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1 |
lcsEthLinkOAMPortConfEntry LCSEthLinkOAMPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1.1 |
lcsEthLinkOAMPortConfIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1.1.1 |
lcsEthLinkOAMPortConfOAMEnableControls whether Link OAM is enabled on this switch port.
Enabling Link OAM provides the network operators the ability to monitor the health of the network and
quickly determine the location of failing links or fault conditions.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1.1.2 |
lcsEthLinkOAMPortConfOAMModeConfigures the OAM Mode as Active or Passive. The default mode is Passive.
0:Passive mode
1:Active moderw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1.1.3 |
lcsEthLinkOAMPortConfLoopbackSupportControls whether the loopback support is enabled for the switch port.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1.1.4 |
lcsEthLinkOAMPortConfLinkMonitorSupportControls whether the Link Monitor support is enabled for the switch port.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1.1.5 |
lcsEthLinkOAMPortConfMIBRetrievalSupportControls whether the MIB Retrieval Support is enabled for the switch port.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1.1.6 |
lcsEthLinkOAMPortConfLoopbackOperationIf the Loopback support is enabled, enabling this field will start a loopback operation for the port.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.1.1.7 |
lcsEthLinkOAMPortDetailStatusTableEth Link OAM Port Detail Status table SEQUENCE OF LCSEthLinkOAMPortDetailStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2 |
lcsEthLinkOAMPortDetailStatusEntryEth Link OAM Port Detail Status entry LCSEthLinkOAMPortDetailStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1 |
lcsEthLinkOAMPortDetailStatusIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.1 |
lcsEthLinkOAMPortPDUPermissionThis field is available only for the Local DTE.
It displays the current permission rules set for the local DTE.
Possible values are Link fault, Receive only, Information exchange only, ANY.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.2 |
lcsEthLinkOAMPortDiscoveryStateDisplays the current state of the discovery process.
Possible states are Fault state, Active state, Passive state,
SEND_LOCAL_REMOTE_STATE, SEND_LOCAL_REMOTE_OK_STATE, SEND_ANY_STATE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.3 |
lcsEthLinkOAMPortPeerMACAddressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.4 |
lcsEthLinkOAMPortLocalModeThe Mode in which the Link OAM is operating, Active or Passive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.5 |
lcsEthLinkOAMPortLocalUnidirectionalOperationSupportThis feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.6 |
lcsEthLinkOAMPortLocalRemoteLoopbackSupportIf status is enabled, DTE is capable of OAM remote loopback mode.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.7 |
lcsEthLinkOAMPortLocalLinkMonitoringSupportIf status is enabled, DTE supports interpreting Link Events.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.8 |
lcsEthLinkOAMPortLocalMIBRetrievalSupportIf status ie enabled DTE supports sending Variable Response OAMPDUs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.9 |
lcsEthLinkOAMPortLocalMTUSizeIt represents the largest OAMPDU, in octets, supported by the DTE.
This value is compared to the remotes Maximum PDU Size and the smaller of the two is used.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.10 |
lcsEthLinkOAMPortLocalMultiplexerStateWhen in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer.
Incase of discarding, the device discards all the non-OAMPDU's.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.11 |
lcsEthLinkOAMPortLocalParserStateWhen in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer.
When in loopback, Device is looping back non-OAMPDUs to the lower sublayer.
When in discarding state, Device is discarding non-OAMPDUs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.12 |
lcsEthLinkOAMPortLocalOrganizationalUniqueIdentification24-bit Organizationally Unique Identifier of the vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.13 |
lcsEthLinkOAMPortLocalPDURevisionIt indicates the current revision of the Information TLV.
The value of this field shall start at zero and be incremented each time something in the Information TLV changes.
Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed
(an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed).ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.14 |
lcsEthLinkOAMPortPeerModeThe Mode in which the Link OAM is operating, Active or Passive.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.15 |
lcsEthLinkOAMPortPeerUnidirectionalOperationSupportThis feature is not available to be configured by the user.
The status of this configuration is retrieved from the PHY.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.16 |
lcsEthLinkOAMPortPeerRemoteLoopbackSupportIf status is enabled, DTE is capable of OAM remote loopback mode.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.17 |
lcsEthLinkOAMPortPeerLinkMonitoringSupportIf status is enabled, DTE supports interpreting Link Events.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.18 |
lcsEthLinkOAMPortPeerMIBRetrievalSupportIf status ie enabled DTE supports sending Variable Response OAMPDUs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.19 |
lcsEthLinkOAMPortPeerMTUSizeIt represents the largest OAMPDU, in octets, supported by the DTE.
This value is compared to the remotes Maximum PDU Size and the smaller of the two is used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.20 |
lcsEthLinkOAMPortPeerMultiplexerStateWhen in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer.
Incase of discarding, the device discards all the non-OAMPDU's.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.21 |
lcsEthLinkOAMPortPeerParserStateWhen in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer.
When in loopback, Device is looping back non-OAMPDUs to the lower sublayer.
When in discarding state, Device is discarding non-OAMPDUs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.22 |
lcsEthLinkOAMPortPeerOrganizationalUniqueIdentification24-bit Organizationally Unique Identifier of the vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.23 |
lcsEthLinkOAMPortPDURevisionIt indicates the current revision of the Information TLV.
The value of this field shall start at zero and be incremented each time something in the Information TLV changes.
Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed
(an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.2.1.24 |
lcsEthLinkOAMPortLinkEventConfTableEth Link OAM Port Link Event Conf Table SEQUENCE OF LCSEthLinkOAMPortLinkEventConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3 |
lcsEthLinkOAMPortLinkEventConfEntryEth Link OAM Port Link Event Conf Entry LCSEthLinkOAMPortLinkEventConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3.1 |
lcsPortLinkEventConfIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3.1.1 |
lcsPortLinkEventConfErrorFrameEventErrorWindowThe Errored Frame Event counts the number of errored frames detected during the specified period.
Represents the window period in the order of 1 sec for the observation of various link events.
range: 1-60rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3.1.2 |
lcsPortLinkEventConfErrorFrameEventErrorThresholdThe Errored Frame Event counts the number of errored frames detected during the specified period.
Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error.
range:0-0xffffffffrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3.1.3 |
lcsPortLinkEventConfSymbolPeriodErrorEventErrorWindowThe Errored Symbol Period Event counts the number of symbol errors that occurred during the specified period.
Represents the window period in the order of 1 sec for the observation of various link events.
range: 1-60rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3.1.4 |
lcsPortLinkEventConfSymbolPeriodErrorEventErrorThresholdThe Errored Symbol Period Event counts the number of symbol errors that occurred during the specified period.
Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error.
range:0-0xffffffffrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3.1.5 |
lcsPortLinkEventConfSecondsSummaryEventErrorWindowThe Errored Frame Seconds Summary Event TLV counts the number of errored frame seconds that occurred during the specified period.
Represents the window period in the order of 1 sec for the observation of various link events.
range: 10-900rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3.1.6 |
lcsPortLinkEventConfSecondsSummaryEventErrorThresholdThe Errored Frame Seconds Summary Event TLV counts the number of errored frame seconds that occurred during the specified period.
Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error.
range:0-0xffffrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.3.1.7 |
lcsEthLinkOAMPortDetailedStatisticsTableEth Link OAM Port Detailed Statistics Table SEQUENCE OF LCSEthLinkOAMPortDetailedStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4 |
lcsEthLinkOAMPortDetailedStatisticsEntryEth Link OAM Port Detailed Statistics Entry LCSEthLinkOAMPortDetailedStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1 |
lcsPortDetailedStatisticsIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.1 |
lcsPortDetailedStatisticsRxOAMInformationPDUsThe number of received and transmitted OAM Information PDU's.
Discontinuities of this counter can occur at re-initialization of the management system.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.2 |
lcsPortDetailedStatisticsRxUniqueErrorEventNotificationA count of the number of unique Event OAMPDUs received and transmitted on this interface.
Event Notifications may be sent in duplicate to increase the probability of successfully being received,
given the possibility that a frame may be lost in transit.
Duplicate Event Notification transmissions are counted by
Duplicate Event Notification counters for Tx and Rx respectively.
A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with
a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.3 |
lcsPortDetailedStatisticsRxDuplicateErrorEventNotificationA count of the number of duplicate Event OAMPDUs received and transmitted on this interface.
Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received,
given the possibility that a frame may be lost in transit.
A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with
a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.4 |
lcsPortDetailedStatisticsRxLoopbackControlA count of the number of Loopback Control OAMPDUs received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.5 |
lcsPortDetailedStatisticsRxVariableRequestA count of the number of Variable Request OAMPDUs received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.6 |
lcsPortDetailedStatisticsRxVariableResponseA count of the number of Variable Response OAMPDUs received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.7 |
lcsPortDetailedStatisticsRxOrgSpecificPDUsA count of the number of Organization Specific OAMPDUs transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.8 |
lcsPortDetailedStatisticsRxUnsupportedCodesA count of the number of OAMPDUs transmitted on this interface with an unsupported op-code.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.9 |
lcsPortDetailedStatisticsRxLinkFaultPDUsA count of the number of Link fault PDU's received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.10 |
lcsPortDetailedStatisticsRxDyingGaspA count of the number of Dying Gasp events received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.11 |
lcsPortDetailedStatisticsRxCriticalEventPDUsA count of the number of Critical event PDU's received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.12 |
lcsPortDetailedStatisticsTxOAMInformationPDUsThe number of received and transmitted OAM Information PDU's.
Discontinuities of this counter can occur at re-initialization of the management system.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.13 |
lcsPortDetailedStatisticsTxUniqueErrorEventNotificationA count of the number of unique Event OAMPDUs received and transmitted on this interface.
Event Notifications may be sent in duplicate to increase the probability of successfully being received,
given the possibility that a frame may be lost in transit.
Duplicate Event Notification transmissions are counted by
Duplicate Event Notification counters for Tx and Rx respectively.
A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with
a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.14 |
lcsPortDetailedStatisticsTxDuplicateErrorEventNotificationA count of the number of duplicate Event OAMPDUs received and transmitted on this interface.
Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received,
given the possibility that a frame may be lost in transit.
A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with
a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.15 |
lcsPortDetailedStatisticsTxLoopbackControlA count of the number of Loopback Control OAMPDUs received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.16 |
lcsPortDetailedStatisticsTxVariableRequestA count of the number of Variable Request OAMPDUs received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.17 |
lcsPortDetailedStatisticsTxVariableResponseA count of the number of Variable Response OAMPDUs received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.18 |
lcsPortDetailedStatisticsTxOrgSpecificPDUsA count of the number of Organization Specific OAMPDUs transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.19 |
lcsPortDetailedStatisticsTxUnsupportedCodesA count of the number of OAMPDUs transmitted on this interface with an unsupported op-code.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.20 |
lcsPortDetailedStatisticsTxLinkFaultPDUsA count of the number of Link fault PDU's received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.21 |
lcsPortDetailedStatisticsTxDyingGaspA count of the number of Dying Gasp events received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.22 |
lcsPortDetailedStatisticsTxCriticalEventPDUsA count of the number of Critical event PDU's received and transmitted on this interface.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.23 |
lcsPortDetailedStatisticsClearClears the counters for the selected port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.4.1.24 |
lcsEthLinkOAMPortEventDetailedStatisticsTableEth Link OAM Port Event Detailed Statistics Table SEQUENCE OF LCSEthLinkOAMPortEventDetailedStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5 |
lcsEthLinkOAMPortEventDetailedStatisticsEntryEth Link OAM Port Event Detailed Statistics Entry LCSEthLinkOAMPortEventDetailedStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1 |
lcsDetailedStatisticsIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.1 |
lcsDetailedStatisticsLocalSequenceNumberThis two-octet field indicates the total number of events occurred at the remote end.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.2 |
lcsDetailedStatisticsLocalFrameErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.3 |
lcsDetailedStatisticsLocalFrameErrorEventWindowThis two-octet field indicates the duration of the period in terms of 100 ms intervals. 1)
The default value is one second. 2) The lower bound is one second. 3)
The upper bound is one minute.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.4 |
lcsDetailedStatisticsLocalFrameErrorEventThresholdThis four-octet field indicates the number of detected errored frames in the period is required
to be equal to or greater than in order for the event to be generated. 1)
The default value is one frame error. 2)
The lower bound is zero frame errors. 3)
The upper bound is unspecified.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.5 |
lcsDetailedStatisticsLocalFrameErrorsThis four-octet field indicates the number of detected errored frames in the period.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.6 |
lcsDetailedStatisticsLocalTotalFrameErrorsThis eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.7 |
lcsDetailedStatisticsLocalTotalFrameErrorEventsThis four-octet field indicates the number of Errored Frame Event TLVs that
have been generated since the OAM sublayer was reset.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.8 |
lcsDetailedStatisticsLocalFramePeriodErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.9 |
lcsDetailedStatisticsLocalFramePeriodErrorEventWindowThis four-octet field indicates the duration of period in terms of frames.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.10 |
lcsDetailedStatisticsLocalFramePeriodErrorEventThresholdThis four-octet field indicates the number of errored frames in the period is required
to be equal to or greater than in order for the event to be generated.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.11 |
lcsDetailedStatisticsLocalFramePeriodErrorsThis four-octet field indicates the number of frame errors in the period.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.12 |
lcsDetailedStatisticsLocalTotalFramePeriodErrorsThis eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.13 |
lcsDetailedStatisticsLocalTotalFramePeriodErrorEventsThis four-octet field indicates the number of Errored Frame Period Event TLVs
that have been generated since the OAM sublayer was reset.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.14 |
lcsDetailedStatisticsLocalSymbolPeriodErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.15 |
lcsDetailedStatisticsLocalSymbolPeriodErrorEventWindowThis eight-octet field indicates the number of symbols in the period.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.16 |
lcsDetailedStatisticsLocalSymbolPeriodErrorEventThresholdThis eight-octet field indicates the number of errored symbols in the period is required to
be equal to or greater than in order for the event to be generated.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.17 |
lcsDetailedStatisticsLocalSymbolPeriodErrorsThis eight-octet field indicates the number of symbol errors in the period.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.18 |
lcsDetailedStatisticsLocalSymbolFramePeriodErrorsThis eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.19 |
lcsDetailedStatisticsLocalSymbolFramePeriodErrorEventsThis four-octet field indicates the number of Errored Symbol Period Event TLVs that
have been generated since the OAM sublayer was reset.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.20 |
lcsDetailedStatisticsLocalEventSecondsSummaryTimeStampThis two-octet field indicates the time reference when the event was generated,
in terms of 100 ms intervals, encoded as a 16-bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.21 |
lcsDetailedStatisticsLocalEventSecondsSummaryWindowThis two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.22 |
lcsDetailedStatisticsLocalEventSecondsSummaryThresholdThis two-octet field indicates the number of errored frame seconds in the period is required
to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.23 |
lcsDetailedStatisticsLocalEventSecondsSummaryEventsThis two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.24 |
lcsDetailedStatisticsLocalEventSecondsSummaryErrorTotalThis four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.25 |
lcsDetailedStatisticsLocalEventSecondsSummaryEventTotalThis four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that
have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.26 |
lcsDetailedStatisticsRemoteFrameErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.27 |
lcsDetailedStatisticsRemoteFrameErrorEventWindowThis two-octet field indicates the duration of the period in terms of 100 ms intervals. 1)
The default value is one second. 2) The lower bound is one second. 3)
The upper bound is one minute.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.28 |
lcsDetailedStatisticsRemoteFrameErrorEventThresholdThis four-octet field indicates the number of detected errored frames in the period is required
to be equal to or greater than in order for the event to be generated. 1)
The default value is one frame error. 2)
The lower bound is zero frame errors. 3)
The upper bound is unspecified.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.29 |
lcsDetailedStatisticsRemoteFrameErrorsThis four-octet field indicates the number of detected errored frames in the period.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.30 |
lcsDetailedStatisticsRemoteTotalFrameErrorsThis eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.31 |
lcsDetailedStatisticsRemoteTotalFrameErrorEventsThis four-octet field indicates the number of Errored Frame Event TLVs that
have been generated since the OAM sublayer was reset.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.32 |
lcsDetailedStatisticsRemoteFramePeriodErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.33 |
lcsDetailedStatisticsRemoteFramePeriodErrorEventWindowThis four-octet field indicates the duration of period in terms of frames.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.34 |
lcsDetailedStatisticsRemoteFramePeriodErrorEventThresholdThis four-octet field indicates the number of errored frames in the period is required
to be equal to or greater than in order for the event to be generated.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.35 |
lcsDetailedStatisticsRemoteFramePeriodErrorsThis four-octet field indicates the number of frame errors in the period.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.36 |
lcsDetailedStatisticsRemoteTotalFramePeriodErrorsThis eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.37 |
lcsDetailedStatisticsRemoteTotalFramePeriodErrorEventsThis four-octet field indicates the number of Errored Frame Period Event TLVs
that have been generated since the OAM sublayer was reset.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.38 |
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.39 |
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventWindowThis eight-octet field indicates the number of symbols in the period.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.40 |
lcsDetailedStatisticsRemoteSymbolPeriodErrorEventThresholdThis eight-octet field indicates the number of errored symbols in the period is required to
be equal to or greater than in order for the event to be generated.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.41 |
lcsDetailedStatisticsRemoteSymbolPeriodErrorsThis eight-octet field indicates the number of symbol errors in the period.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.42 |
lcsDetailedStatisticsRemoteSymbolFramePeriodErrorsThis eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.43 |
lcsDetailedStatisticsRemoteSymbolFramePeriodErrorEventsThis four-octet field indicates the number of Errored Symbol Period Event TLVs that
have been generated since the OAM sublayer was reset.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.44 |
lcsDetailedStatisticsRemoteEventSecondsSummaryTimeStampThis two-octet field indicates the time reference when the event was generated,
in terms of 100 ms intervals, encoded as a 16-bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.45 |
lcsDetailedStatisticsRemoteEventSecondsSummaryWindowThis two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.46 |
lcsDetailedStatisticsRemoteEventSecondsSummaryThresholdThis two-octet field indicates the number of errored frame seconds in the period is required
to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.47 |
lcsDetailedStatisticsRemoteEventSecondsSummaryEventsThis two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.48 |
lcsDetailedStatisticsRemoteEventSecondsSummaryErrorTotalThis four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.49 |
lcsDetailedStatisticsRemoteEventSecondsSummaryEventTotalThis four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that
have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.29.5.1.50 |
lcsIPMC OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32 |
lcsIGMPSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1 |
lcsIGMPSnoopingBasicConfigSnoopingEnabledSnooping Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.2 |
lcsIGMPSnoopingBasicConfigUnregisteredIPMCv4FloodingEnabledUnregistered IPMCv4 Flooding Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.3 |
lcsIGMPSnoopingBasicConfigIGMPSSMRangeIGMP SSM Range
IPv4 multicast address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.4 |
lcsIGMPSnoopingBasicConfigIGMPSSMRangeLengthIGMP SSM Range prefix.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.5 |
lcsIGMPSnoopingBasicConfigLeaveProxyEnabledLeave Proxy Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.6 |
lcsIGMPSnoopingBasicConfigProxyEnabledProxy Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.7 |
lcsIGMPSnoopingPortRelatedTable SEQUENCE OF LCSIGMPSnoopingPortRelatedEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.8 |
lcsIGMPSnoopingPortRelatedEntry LCSIGMPSnoopingPortRelatedEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.8.1 |
lcsIGMPSnoopingPortRelatedPortIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.8.1.1 |
lcsIGMPSnoopingPortRouterPortRouter Port
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.8.1.2 |
lcsIGMPSnoopingPortFastLeaveFast Leave
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.8.1.3 |
lcsIGMPSnoopingPortThrottlingThrottling.
Range: 0:unlimited, 1-10rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.8.1.4 |
lcsIGMPSnoopingPortFilteringProfileFiltering Profilerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.8.1.5 |
lcsIGMPSnoopingVLANConfigTable SEQUENCE OF LCSIGMPSnoopingVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9 |
lcsIGMPSnoopingVLANConfigEntry LCSIGMPSnoopingVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1 |
lcsIGMPSnoopingVLANConfigIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.1 |
lcsIGMPSnoopingVLANConfigVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.2 |
lcsIGMPSnoopingVLANConfigSnoopingEnabledIGMP Snooping Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.3 |
lcsIGMPSnoopingVLANConfigQuerierElectionQuerier Election
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.4 |
lcsIGMPSnoopingVLANConfigQuerierAddressQuerier Addressrw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.5 |
lcsIGMPSnoopingVLANConfigCompatibilityCompatibility
0:IGMP-Auto
1:Forced IGMPv1
2:Forced IGMPv2
3:Forced IGMPv3rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.6 |
lcsIGMPSnoopingVLANConfigPRIPriority of Interface.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.7 |
lcsIGMPSnoopingVLANConfigRVRobustness Variable.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.8 |
lcsIGMPSnoopingVLANConfigQIQuery Interval.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.9 |
lcsIGMPSnoopingVLANConfigQRIQuery Response Interval.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.10 |
lcsIGMPSnoopingVLANConfigLLQILast Member Query Interval.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.11 |
lcsIGMPSnoopingVLANConfigURIUnsolicited Report Interval.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.9.1.12 |
lcsIGMPSnoopingStatusClearClears all Statistics counters.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.10 |
lcsIGMPSnoopingStatusTable SEQUENCE OF LCSIGMPSnoopingStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11 |
lcsIGMPSnoopingStatusEntry LCSIGMPSnoopingStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1 |
lcsIGMPSnoopingStatusIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.1 |
lcsIGMPSnoopingStatusVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.2 |
lcsIGMPSnoopingStatusQuerierVersionQuerier Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.3 |
lcsIGMPSnoopingStatusHostVersionHost Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.4 |
lcsIGMPSnoopingStatusQuerierStatusQuerier Status.
0:Init
1:Idle
2:Activero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.5 |
lcsIGMPSnoopingStatusQueriesTransmittedQueries Transmitted.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.6 |
lcsIGMPSnoopingStatusQueriesReceivedQueries Received.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.7 |
lcsIGMPSnoopingStatusV1ReportsReceivedV1 Reports Receivedro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.8 |
lcsIGMPSnoopingStatusV2ReportsReceivedV2 Reports Receivedro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.9 |
lcsIGMPSnoopingStatusV3ReportsReceivedV3 Reports Receivedro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.10 |
lcsIGMPSnoopingStatusV2LeavesReceivedV2 Leaves Receivedro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.11.1.11 |
lcsIGMPSnoopingStatusRouterPortTable SEQUENCE OF LCSIGMPSnoopingStatusRouterPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.12 |
lcsIGMPSnoopingStatusRouterPortEntry LCSIGMPSnoopingStatusRouterPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.12.1 |
lcsIGMPSnoopingStatusRouterPortIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.12.1.1 |
lcsIGMPSnoopingStatusRouterPortPortSwitch port number.
0:DISABLE
1:IDLE
2:ACTIVEro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.12.1.2 |
lcsIGMPSnoopingGroupInfoTable SEQUENCE OF LCSIGMPSnoopingGroupInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.13 |
lcsIGMPSnoopingGroupInfoEntry LCSIGMPSnoopingGroupInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.13.1 |
lcsIGMPSnoopingGroupInfoIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.13.1.1 |
lcsIGMPSnoopingGroupInfoVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.13.1.2 |
lcsIGMPSnoopingGroupInfoGroupsGroupsro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.13.1.3 |
lcsIGMPSnoopingGroupInfoPortMembersPort Membersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.13.1.4 |
lcsIGMPSFMInfoTable SEQUENCE OF LCSIGMPSFMInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14 |
lcsIGMPSFMInfoEntry LCSIGMPSFMInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1 |
lcsIGMPSFMInfoIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1.1 |
lcsIGMPSFMInfoVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1.2 |
lcsIGMPSFMInfoGroupGroupro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1.3 |
lcsIGMPSFMInfoPortPortro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1.4 |
lcsIGMPSFMInfoModeMode
0:Exclude.
1:Includero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1.5 |
lcsIGMPSFMInfoSourceAddressSource Addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1.6 |
lcsIGMPSFMInfoTypeType
0:Deny
1:Allowro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1.7 |
lcsIGMPSFMInfoHardwareFilterSwitchHardware Filter\Switch
0:No
1:Yesro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.1.14.1.8 |
lcsMLDSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2 |
lcsMLDSnoopingBasicConfigSnoopingEnabledSnooping Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.2 |
lcsMLDSnoopingBasicConfigUnregisteredIPMCv6FloodingEnabledUnregistered IPMCv6 Flooding Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.3 |
lcsMLDSnoopingBasicConfigMLDSSMRangeMLD SSM Range
IPv6 multicast address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.4 |
lcsMLDSnoopingBasicConfigMLDSSMRangeLengthMLD SSM Range prefix.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.5 |
lcsMLDSnoopingBasicConfigLeaveProxyEnabledLeave Proxy Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.6 |
lcsMLDSnoopingBasicConfigProxyEnabledProxy Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.7 |
lcsMLDSnoopingPortRelatedTable SEQUENCE OF LCSMLDSnoopingPortRelatedEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.8 |
lcsMLDSnoopingPortRelatedEntry LCSMLDSnoopingPortRelatedEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.8.1 |
lcsMLDSnoopingPortRelatedPortIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.8.1.1 |
lcsMLDSnoopingPortRouterPortRouter Port
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.8.1.2 |
lcsMLDSnoopingPortFastLeaveFast Leave
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.8.1.3 |
lcsMLDSnoopingPortThrottlingThrottling.
Range: 0:unlimited, 1-10rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.8.1.4 |
lcsMLDSnoopingPortFilteringProfileFiltering Profilerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.8.1.5 |
lcsMLDSnoopingVLANConfigTable SEQUENCE OF LCSMLDSnoopingVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9 |
lcsMLDSnoopingVLANConfigEntry LCSMLDSnoopingVLANConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1 |
lcsMLDSnoopingVLANConfigIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.1 |
lcsMLDSnoopingVLANConfigVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.2 |
lcsMLDSnoopingVLANConfigSnoopingEnabledIGMP Snooping Enabled
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.3 |
lcsMLDSnoopingVLANConfigQuerierElectionQuerier Election
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.4 |
lcsMLDSnoopingVLANConfigCompatibilityCompatibility
0:MLD-Auto
1:Forced MLDv1
2:Forced MLDv2rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.6 |
lcsMLDSnoopingVLANConfigPRIPriority of Interface.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.7 |
lcsMLDSnoopingVLANConfigRVRobustness Variable.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.8 |
lcsMLDSnoopingVLANConfigQIQuery Interval.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.9 |
lcsMLDSnoopingVLANConfigQRIQuery Response Interval.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.10 |
lcsMLDSnoopingVLANConfigLLQILast Member Query Interval.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.11 |
lcsMLDSnoopingVLANConfigURIUnsolicited Report Interval.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.9.1.12 |
lcsMLDSnoopingStatusClearClears all Statistics counters.rw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.10 |
lcsMLDSnoopingStatusTable SEQUENCE OF LCSMLDSnoopingStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11 |
lcsMLDSnoopingStatusEntry LCSMLDSnoopingStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1 |
lcsMLDSnoopingStatusIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.1 |
lcsMLDSnoopingStatusVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.2 |
lcsMLDSnoopingStatusQuerierVersionQuerier Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.3 |
lcsMLDSnoopingStatusHostVersionHost Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.4 |
lcsMLDSnoopingStatusQuerierStatusQuerier Status.
0:Init
1:Idle
2:Activero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.5 |
lcsMLDSnoopingStatusQueriesTransmittedQueries Transmitted.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.6 |
lcsMLDSnoopingStatusQueriesReceivedQueries Received.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.7 |
lcsMLDSnoopingStatusV1ReportsReceivedV1 Reports Receivedro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.8 |
lcsMLDSnoopingStatusV2ReportsReceivedV2 Reports Receivedro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.9 |
lcsMLDSnoopingStatusV1LeavesReceivedV1 Leaves Receivedro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.11.1.11 |
lcsMLDSnoopingStatusRouterPortTable SEQUENCE OF LCSMLDSnoopingStatusRouterPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.12 |
lcsMLDSnoopingStatusRouterPortEntry LCSMLDSnoopingStatusRouterPortEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.12.1 |
lcsMLDSnoopingStatusRouterPortIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.12.1.1 |
lcsMLDSnoopingStatusRouterPortPortSwitch port number.
0:DISABLE
1:IDLE
2:ACTIVEro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.12.1.2 |
lcsMLDSnoopingGroupInfoTable SEQUENCE OF LCSMLDSnoopingGroupInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.13 |
lcsMLDSnoopingGroupInfoEntry LCSMLDSnoopingGroupInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.13.1 |
lcsMLDSnoopingGroupInfoIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.13.1.1 |
lcsMLDSnoopingGroupInfoVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.13.1.2 |
lcsMLDSnoopingGroupInfoGroupsGroupsro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.13.1.3 |
lcsMLDSnoopingGroupInfoPortMembersPort Membersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.13.1.4 |
lcsMLDSFMInfoTable SEQUENCE OF LCSMLDSFMInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14 |
lcsMLDSFMInfoEntry LCSMLDSFMInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1 |
lcsMLDSFMInfoIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1.1 |
lcsMLDSFMInfoVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1.2 |
lcsMLDSFMInfoGroupGroupro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1.3 |
lcsMLDSFMInfoPortPortro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1.4 |
lcsMLDSFMInfoModeMode
0:Exclude.
1:Includero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1.5 |
lcsMLDSFMInfoSourceAddressSource Addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1.6 |
lcsMLDSFMInfoTypeType
0:Deny
1:Allowro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1.7 |
lcsMLDSFMInfoHardwareFilterSwitchHardware Filter\Switch
0:No
1:Yesro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.32.2.14.1.8 |
lcsMVR OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33 |
lcsMVRConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1 |
lcsMVRConfigMVRModeMVR Mode
0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.2 |
lcsVLANInterfaceSettingTableMVR Config table SEQUENCE OF LCSVLANInterfaceSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3 |
lcsVLANInterfaceSettingEntryMVR Config table LCSVLANInterfaceSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1 |
lcsVLANInterfaceSettingIndexMVR Config index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.1 |
lcsVLANInterfaceSettingMVRVIDMVR VLAN IDrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.2 |
lcsVLANInterfaceSettingMVRNameMVR Name. Length:0-16rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.3 |
lcsVLANInterfaceSettingIGMPAddressIPv4 IGMP Addressrw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.4 |
lcsVLANInterfaceSettingModeMode.
0:Dynamic
1:Compatiblerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.5 |
lcsVLANInterfaceSettingTaggingTagging.
0:Untagged
1:Taggedrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.6 |
lcsVLANInterfaceSettingPriorityPriorityrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.7 |
lcsVLANInterfaceSettingLLQILLQIrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.8 |
lcsVLANInterfaceSettingInterfaceChannelProfileInterface Channel Profile.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.9 |
lcsVLANInterfaceSettingRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.3.1.10 |
lcsMVRVIDIndexSet VIDIndex before use VLANInterfaceSettingPortRoleTable table.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.4 |
lcsVLANInterfaceSettingPortRoleTableVLAN Interface Setting Port Role table SEQUENCE OF LCSVLANInterfaceSettingPortRoleEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.5 |
lcsVLANInterfaceSettingPortRoleEntryVLAN Interface Setting Port Role table LCSVLANInterfaceSettingPortRoleEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.5.1 |
lcsVLANInterfaceSettingPortRoleIndexVLAN Interface Setting Port Role index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.5.1.1 |
lcsVLANInterfaceSettingPortRolePortPort Role.
0:Inactive
1:Source
2:Receiverrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.5.1.2 |
lcsImmediateLeaveSettingTableImmediate Leave Setting table SEQUENCE OF LCSImmediateLeaveSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.6 |
lcsImmediateLeaveSettingEntryImmediate Leave Setting table LCSImmediateLeaveSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.6.1 |
lcsImmediateLeaveSettingPortImmediate Leave Setting index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.6.1.1 |
lcsImmediateLeaveSettingImmediateLeaveImmediate Leave
0:Disable
1:Enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.1.6.1.2 |
lcsStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2 |
lcsMVRStatisticsClearStatistics Clear.
1:Clearrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.2 |
lcsMVRStatisticsTable SEQUENCE OF LCSMVRStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3 |
lcsMVRStatisticsEntry LCSMVRStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1 |
lcsMVRStatisticsIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1.1 |
lcsMVRStatisticsVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1.2 |
lcsMVRStatisticsIGMPMLDQueriesReceivedIGMP/MLD Queries Receivedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1.3 |
lcsMVRStatisticsIGMPMLDQueriesTransmittedIGMP/MLD Queries Transmittedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1.4 |
lcsMVRStatisticsIGMPv1JoinsReceivedIGMPv1 Joins Receivedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1.5 |
lcsMVRStatisticsIGMPv2MLDv1ReportsReceivedIGMPv2/MLDv1 Reports Receivedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1.6 |
lcsMVRStatisticsIGMPv3MLDv2ReportsReceivedIGMPv3/MLDv2 Reports Receivedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1.7 |
lcsMVRStatisticsIGMPv2MLDv1LeavesReceivedIGMPv2/MLDv1 Leaves Receivedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.2.3.1.8 |
lcsGroupInformation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.3 |
lcsMVRGroupInfoTable SEQUENCE OF LCSMVRGroupInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.3.1 |
lcsMVRGroupInfoEntry LCSMVRGroupInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.3.1.1 |
lcsMVRGroupInfoIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.3.1.1.1 |
lcsMVRGroupInfoVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.3.1.1.2 |
lcsMVRGroupInfoGroupsGroupsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.3.1.1.3 |
lcsMVRGroupInfoPortMembersPort Membersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.3.1.1.4 |
lcsMVRSFMInformation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4 |
lcsMVRSFMInfoTable SEQUENCE OF LCSMVRSFMInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2 |
lcsMVRSFMInfoEntry LCSMVRSFMInfoEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1 |
lcsMVRSFMInfoIndexIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1.1 |
lcsMVRSFMInfoVLANIDVLAN IDro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1.2 |
lcsMVRSFMInfoGroupGroupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1.3 |
lcsMVRSFMInfoPortPortro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1.4 |
lcsMVRSFMInfoModeMode
0:Exclude.
1:Includero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1.5 |
lcsMVRSFMInfoSourceAddressSource Addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1.6 |
lcsMVRSFMInfoTypeType
0:Deny
1:Allowro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1.7 |
lcsMVRSFMInfoHardwareFilterSwitchHardware Filter\Switch
0:No
1:Yesro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.33.4.2.1.8 |
lcsIPMCLIB OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34 |
lcsMulticastFilteringProfileModeMulticast Filtering Profile Mode.
0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.1 |
lcsMulticastFilteringProfileSettingTableMulticast Filtering Profile Setting table SEQUENCE OF LCSMulticastFilteringProfileSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.2 |
lcsMulticastFilteringProfileSettingEntryMulticast Filtering Profile Setting table. LCSMulticastFilteringProfileSettingEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.2.1 |
lcsMulticastFilteringProfileSettingIndexMulticast Filtering Profile Setting index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.2.1.1 |
lcsMulticastFilteringProfileSettingProfileNameProfile Name. Length:1-16rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.2.1.2 |
lcsMulticastFilteringProfileSettingProfileDescriptionProfile Description. Length:0-64rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.2.1.3 |
lcsMulticastFilteringProfileSettingRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.2.1.4 |
lcsMulticastFilteringProfileRuleSettingsProfileNameIndexSet this Profile Name value before use MulticastFilteringProfileRuleSettingsTable tablerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.3 |
lcsMulticastFilteringProfileRuleSettingsTableMulticast Filtering Profile Rule Setting table SEQUENCE OF LCSMulticastFilteringProfileRuleSettingsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4 |
lcsMulticastFilteringProfileRuleSettingsEntryMulticast Filtering Profile Rule Setting table. LCSMulticastFilteringProfileRuleSettingsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1 |
lcsMulticastFilteringProfileRuleSettingsTableIndexMulticast Filtering Profile Rule Setting index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1.1 |
lcsMulticastFilteringProfileRuleSettingsProfileNameProfile Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1.2 |
lcsMulticastFilteringProfileRuleSettingsIndexIndexro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1.3 |
lcsMulticastFilteringProfileRuleSettingsEntryNameEntry Name, Length: 1-16rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1.4 |
lcsMulticastFilteringProfileRuleSettingsAddressRangeAddress Rangero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1.5 |
lcsMulticastFilteringProfileRuleSettingsAction0:Deny
1:Permitrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1.6 |
lcsMulticastFilteringProfileRuleSettingsLog0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1.7 |
lcsMulticastFilteringProfileRuleSettingsRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.4.1.8 |
lcsMulticastFilteringProfileAddressConfigTableMulticast Filtering Profile Address Config table SEQUENCE OF LCSMulticastFilteringProfileAddressConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.5 |
lcsMulticastFilteringProfileAddressConfigEntryMulticast Filtering Profile Address Config table. LCSMulticastFilteringProfileAddressConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.5.1 |
lcsMulticastFilteringProfileAddressConfigTableIndexMulticast Filtering Profile Address Config index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.5.1.1 |
lcsMulticastFilteringProfileAddressConfigEntryNameEntry Name, Length: 1-16rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.5.1.2 |
lcsMulticastFilteringProfileAddressConfigStartAddressIPv4/IPv6 Multicast Group Addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.5.1.3 |
lcsMulticastFilteringProfileAddressConfigEndAddressIPv4/IPv6 Multicast Group Addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.5.1.4 |
lcsMulticastFilteringProfileAddressConfigRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.34.5.1.5 |
lcsEEE OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.35 |
lcsPortPowerSavings OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.35.1 |
lcsEnergyEfficientEthernetConfigTable SEQUENCE OF LCSEnergyEfficientEthernetConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.35.1.2 |
lcsEnergyEfficientEthernetConfigEntry LCSEnergyEfficientEthernetConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.35.1.2.1 |
lcsEnergyEfficientEthernetConfigPortIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.35.1.2.1.1 |
lcsEnergyEfficientEthernetConfigPortConfigControls whether EEE is enabled for this port.
0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.35.1.2.1.2 |
lcsAggregation OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36 |
lcsAggregationStatic OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1 |
lcsAggrSourceMACAddressSource MAC Addressrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.2 |
lcsAggrDestinationMACAddressDestination MAC Addressrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.3 |
lcsAggrIPAddressIP Addressrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.4 |
lcsAggrTCPUDPPortNumberTCP/UDP Port Numberrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.5 |
lcsAggrGroupConfigTable SEQUENCE OF LCSAggrGroupConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.6 |
lcsAggrGroupConfigEntry LCSAggrGroupConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.6.1 |
lcsAggrGroupConfigPortport index Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.6.1.1 |
lcsAggrGroupConfigGroupgroup index Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.6.1.2 |
lcsAggrGroupConfigAggregation Group Configurationrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.1.6.1.3 |
lcsLACPConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2 |
lcsLACPPortConfigTable SEQUENCE OF LCSLACPPortConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2.1 |
lcsLACPPortConfigEntry LCSLACPPortConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2.1.1 |
lcsLACPPortConfigPortport index Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2.1.1.1 |
lcsLACPPortConfigEnabledControls whether LACP is enabled on this switch port.
0:Disable
1:Enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2.1.1.2 |
lcsLACPPortConfigKeyThe Key value incurred by the port, range 1-Number of link aggregations.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2.1.1.3 |
lcsLACPPortConfigRoleThe Role shows the LACP activity status.
0:Passive
1:Activerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2.1.1.4 |
lcsLACPPortConfigTimeoutThe Timeout controls the period between BPDU transmissions.
0:Slow
1:Fastrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2.1.1.5 |
lcsLACPPortConfigPrioThe Prio controls the priority of the port.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.2.1.1.6 |
lcsLacpSystemStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3 |
lcsLacpSystemStatusTable SEQUENCE OF LCSLacpSystemStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1 |
lcsLacpSystemStatusEntry LCSLacpSystemStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1.1 |
lcsLacpSystemStatusIndexindex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1.1.1 |
lcsLacpSystemStatusAggrIDThe Aggregation ID associated with this aggregation instance.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1.1.2 |
lcsLacpSystemStatusPartnerSystemIDThe system ID (MAC address) of the aggregation partner.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1.1.3 |
lcsLacpSystemStatusPartnerKeyThe Key that the partner has assigned to this aggregation ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1.1.4 |
lcsLacpSystemStatusPartnerPrioThe priority that the partner has assigned to this aggregation ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1.1.5 |
lcsLacpSystemStatusLastChangedThe time since this aggregation changed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1.1.6 |
lcsLacpSystemStatusLocalPortsShows which ports are a part of this aggregation for this switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.3.1.1.7 |
lcsLACPInternalPortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4 |
lcsLACPInternalPortStatusTable SEQUENCE OF LCSLACPInternalPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1 |
lcsLACPInternalPortStatusEntry LCSLACPInternalPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1 |
lcsLACPInternalPortStatusIndexindex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.1 |
lcsLACPInternalPortStatusPortThe switch port number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.2 |
lcsLACPInternalPortStatusStateThe current port state:
Down: The port is not active.
Active: The port is in active state.
Standby: The port is in standby state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.3 |
lcsLACPInternalPortStatusKeyThe key assigned to this port. Only ports with the same key can aggregate together.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.4 |
lcsLACPInternalPortStatusPriorityThe priority assigned to this aggregation group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.5 |
lcsLACPInternalPortStatusActivityThe LACP mode of the group (Active or Passive).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.6 |
lcsLACPInternalPortStatusTimeoutThe timeout mode configured for the port (Fast or Slow).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.7 |
lcsLACPInternalPortStatusAggregationShow whether the system considers this link to be aggregateable. i.e., a potential candidate for aggregation.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.8 |
lcsLACPInternalPortStatusSynchronizationShow whether the system considers this link to be IN_SYNC.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.9 |
lcsLACPInternalPortStatusCollectingShow if collection of incoming frames on this link is enabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.10 |
lcsLACPInternalPortStatusDistributingShow if distribution of outgoing frames on this link is enabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.11 |
lcsLACPInternalPortStatusDefaultedShow if the Actor's Receive machine is using Defaulted operational Partner information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.12 |
lcsLACPInternalPortStatusExpiredShow if that the Actor's Receive machine is in the EXPIRED state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.4.1.1.13 |
lcsLACPNeighborPortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5 |
lcsLACPNeighborPortStatusTable SEQUENCE OF LCSLACPNeighborPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1 |
lcsLACPNeighborPortStatusEntry LCSLACPNeighborPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1 |
lcsLACPNeighborPortStatusIndexindex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.1 |
lcsLACPNeighborPortStatusPortThe switch port number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.2 |
lcsLACPNeighborPortStatusStateThe current port state:
Down: The port is not active.
Active: The port is in active state.
Standby: The port is in standby state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.3 |
lcsLACPNeighborPortStatusAggrIDThe aggregation group ID which the port is assigned to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.4 |
lcsLACPNeighborPortStatusPartnerKeyThe key assigned to this port by the partner.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.5 |
lcsLACPNeighborPortStatusPartnerPortThe partner port number associated with this link.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.6 |
lcsLACPNeighborPortStatusPartnerPortPrioThe priority assigned to this partner port .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.7 |
lcsLACPNeighborPortStatusActivityThe LACP mode of the group (Active or Passive).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.8 |
lcsLACPNeighborPortStatusTimeoutThe timeout mode configured for the partner port (Fast or Slow).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.9 |
lcsLACPNeighborPortStatusAggregationShow whether the partner considers this link to be aggregateable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.10 |
lcsLACPNeighborPortStatusSynchronizationShow whether the partner considers this link to be IN_SYNCro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.11 |
lcsLACPNeighborPortStatusCollectingShow if collection of incoming frames on this link is enabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.12 |
lcsLACPNeighborPortStatusDistributingShow if distribution of outgoing frames on this link is enabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.13 |
lcsLACPNeighborPortStatusDefaultedShow if the partners Receive machine is using Defaulted operational Partner information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.14 |
lcsLACPNeighborPortStatusExpiredShow if that the partners Receive machine is in the EXPIRED state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.5.1.1.15 |
lcsLACPStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6 |
lcsLACPStatusTable SEQUENCE OF LCSLACPStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1 |
lcsLACPStatusEntry LCSLACPStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1.1 |
lcsLACPStatusPortindex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1.1.1 |
lcsLACPStatusLACPYes: means that LACP is enabled and the port link is up.
No: means that LACP is not enabled or that the port link is down.
Backup: means that the port could not join the aggregation group but will join if other port leaves. Meanwhile it's LACP status is disabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1.1.2 |
lcsLACPStatusKeyThe key assigned to this port. Only ports with the same key can aggregate together.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1.1.3 |
lcsLACPStatusAggrIDThe Aggregation ID assigned to this aggregation group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1.1.4 |
lcsLACPStatusPartnerSystemIDThe partner's System ID (MAC address).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1.1.5 |
lcsLACPStatusPartnerPortThe partner's port number connected to this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1.1.6 |
lcsLACPStatusPartnerPrioThe partner's port priority.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.36.6.1.1.7 |
lcsLMC OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500 |
lcsLMCOperatingLMC Operating Switch
0:Disable
1:Enable
2:Tryrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.1 |
lcsLMCConfigViaDHCPEnables LMC configuration via DHCP option 43
0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.2 |
lcsLMCDomainLMC Domain for example cloud.lancom.derw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.3 |
lcsLMCAutoRenewRenew DHCP lease early when connection to LMC is not possible
0:Disabled
1:Enabledrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.4 |
lcsLMCRolloutProjectIDLMC Project rollout information stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.5 |
lcsLMCRolloutLocationIDLMC Location rollout information stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.6 |
lcsLMCRolloutRoleLMC Role rollout information stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.7 |
lcsLMCZeroTouchSupportSupport for Zero Touch
0:No
1:Yesro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.50 |
lcsLMCPairingTokenPresentParing Token present
0:No
1:Yesro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.51 |
lcsLMCManagementStatus0:Unpaired
1:Paired
2:Disabled
3:DisabledByWLC
4:Operating
5:HTTPProtocolError
6:HTTPConnectionError
7:DNSError
8:MemoryError
9:NotYet
10:Redirect
11:AuthenticationError
12:Error
13:CertificateStorageError
14:PairedAndClaimed
15:CertificateError
16:DeactivatedNoActivationCodero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.53 |
lcsLMCControlStatus0:Unpaired
1:Paired
2:Disabled
3:DisabledByWLC
4:Operating
5:HTTPProtocolError
6:HTTPConnectionError
7:DNSError
8:MemoryError
9:NotYet
10:Redirect
11:AuthenticationError
12:Error
13:CertificateStorageError
14:PairedAndClaimed
15:CertificateError
16:DeactivatedNoActivationCodero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.54 |
lcsLMCMonitoringStatus0:Unpaired
1:Paired
2:Disabled
3:DisabledByWLC
4:Operating
5:HTTPProtocolError
6:HTTPConnectionError
7:DNSError
8:MemoryError
9:NotYet
10:Redirect
11:AuthenticationError
12:Error
13:CertificateStorageError
14:PairedAndClaimed
15:CertificateError
16:DeactivatedNoActivationCodero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.55 |
lcsLMCConfigModifiedConfiguration modified by LMC
0:No
1:Yesro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.57 |
lcsLMCDeviceIDDevice IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.58 |
lcsLMCStatusRTTHeartbeat round trip timero Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.100 |
lcsLMCTransportStatusTableTransport status SEQUENCE OF LCSLMCTransportStatusTableEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.101 |
lcsLMCTransportStatusTableEntryTransport number LCSLMCTransportStatusTableEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.101.1 |
lcsLMCTransportStatusTransportNumberIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.101.1.1 |
lcsLMCTransportStatusServiceNameService namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.101.1.2 |
lcsLMCTransportStatusHttpRequestsNumber of Http requestsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.101.1.3 |
lcsLMCTransportStatusHttpRequestsErrorsNumber of Http request errorsro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.101.1.4 |
lcsLMCTransportStatusTXBytesNumber of transmitted bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.101.1.5 |
lcsLMCTransportStatusRXBytesNumber of received bytesro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1500.101.1.7 |
lcsRolloutAgent OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501 |
lcsRolloutAgentOperatingRollout Agent Operating Switch
0:Disable
1:Enable
2:Only-Unconfiguredrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501.1 |
lcsRolloutAgentActiveRollout Agent Active
0:No
1:Yes
2:Deactivatedro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501.100 |
lcsRolloutAgentLastRequestStatusRollout Agent Last Request Status
0:NoError,
1:DnsError,
2:ProtocolError,
3:ConnectionError,
4:MissingOrInvalidConfigro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501.101 |
lcsRolloutAgentLastRequestTimestampRollout Agent Last Request Timestampro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501.102 |
lcsRolloutAgentActiveHeartbeatUrlActive Heartbeat Urlro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501.103 |
lcsRolloutAgentActiveProjectIdRollout Agent Active Project IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501.104 |
lcsRolloutAgentActiveLocationIdRollout Agent Active Location IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501.105 |
lcsRolloutAgentActiveTanRollout Agent Active TANro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.2.1501.106 |
lcsSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3 |
lcsIPSourceGuard OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1 |
lcsIPSourceGuardConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.1 |
lcsIPSourceGuardModeEnable the Global IP Source Guard or disable the
Global IP Source Guard.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.1.1 |
lcsIPSourceGuardDynamicToStaticCmdTranslate all dynamic entries to static entries.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.1.2 |
lcsIPSourceGuardPortConfigTableThe IP Source Guard Port Configuration Table.
INDEX for this table is ifIndex which is
equivalent to the panel port number. SEQUENCE OF LCSIPSourceGuardPortConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.1.3 |
lcsIPSourceGuardPortConfigEntryThe IP Source Guard Port Configuration Entry. LCSIPSourceGuardPortConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.1.3.1 |
lcsIPSourceGuardPortConfigModeSpecify IP Source Guard is enabled on which ports.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.1.3.1.2 |
lcsIPSourceGuardPortMaxDynamicClientsSpecify the maximum number of dynamic clients that can
be learned on given port.
default: 99
0~2: Max Dynamic clients
99:Unlimitedrw Integer32(0..2|99) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.1.3.1.3 |
lcsIPSourceGuardStaticTableThe IP Source Guard Static Table. SEQUENCE OF LCSIPSourceGuardStaticEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2 |
lcsIPSourceGuardStaticEntryThe IP Source Guard Static Entry. LCSIPSourceGuardStaticEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2.1 |
lcsIPSourceGuardStaticSwitchIndexSwitch Index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2.1.1 |
lcsIPSourceGuardStaticIndexThe entry of table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2.1.2 |
lcsIPSourceGuardStaticPortThe port number of table.
range: 1 - port number.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2.1.3 |
lcsIPSourceGuardStaticVLANIdVLAN ID, range: 1 - 4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2.1.4 |
lcsIPSourceGuardStaticIPAddressIP address allowed for doing IP source guard.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2.1.5 |
lcsIPSourceGuardStaticMACAddressAllowed Source MAC address, format: 0a 1b 2c 3d 4e 5f.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2.1.7 |
lcsIPSourceGuardStaticRowStatusThis object indicates the status of this entry, and is
used to create/delete entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.2.1.8 |
lcsIPSourceGuardDynamicTableThe IP Source Guard Dynamic Table. SEQUENCE OF LCSIPSourceGuardDynamicEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.3 |
lcsIPSourceGuardDynamicEntryThe IP Source Guard Dynamic Entry. LCSIPSourceGuardDynamicEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.3.1 |
lcsIPSourceGuardDynamicSwitchIndexSwitch Index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.3.1.1 |
lcsIPSourceGuardDynamicIndexThe entry of table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.3.1.2 |
lcsIPSourceGuardDynamicPortThe logical port for the settings.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.3.1.3 |
lcsIPSourceGuardDynamicVLANIdThe vlan id for the settings.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.3.1.4 |
lcsIPSourceGuardDynamicIPAddressAllowed Source IP address.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.3.1.5 |
lcsIPSourceGuardDynamicMACAddressAllowed Source MAC address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1.3.1.6 |
lcsARPInspection OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2 |
lcsARP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1 |
lcsARPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.1 |
lcsARPConfModeEnable the Global ARP Inspection or disable the Global
ARP Inspection.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.1.1 |
lcsARPPortConfTableThe ARP Port Configuration Table. SEQUENCE OF LCSARPPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.1.3 |
lcsARPPortConfEntryThe ARP Port Configuration Entry. LCSARPPortConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.1.3.1 |
lcsARPPortConfPortThe port number for which the configuration below applies.
range: 1 - port number. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.1.3.1.1 |
lcsARPPortConfModeSpecify ARP Inspection is enabled on which ports.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.1.3.1.2 |
lcsARPPortConfCheckVLANWhen the setting of 'Check VLAN' is disabled, the log
type of ARP Inspection will refer to the port setting.
And the setting of 'Check VLAN' is enabled, the log type
of ARP Inspection will refer to the VLAN setting.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.1.3.1.3 |
lcsARPPortConfLogTypeThe log type of ARP Inspection will refer to the
port setting.
0: none,
1: deny,
2: permit,
3: all,
range: 0-3.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.1.3.1.4 |
lcsARPVlanConfigTableThe ARP Vlan Configuration Table. SEQUENCE OF LCSARPVlanConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.2 |
lcsARPVlanConfigEntryThe ARP Vlan Configuration Entry. LCSARPVlanConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.2.1 |
lcsARPPortConfigIndexThe Index of Vlan config Table Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.2.1.1 |
lcsARPVlanConfigVlanSpecify ARP Inspection is enabled on which VLANs.
range: 1 - 4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.2.1.2 |
lcsARPVlanConfigLogTypeThe log type also can be configured on per VLAN setting.
0: none,
1: deny,
2: permit,
3: all,
range: 0-3.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.2.1.3 |
lcsARPVlanConfigRowStatusThis object indicates the status of this entry, and is
used to create/delete entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.2.1.4 |
lcsARPStaticTableThe ARP Static Table. SEQUENCE OF LCSARPStaticEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3 |
lcsARPStaticEntryThe ARP Static Entry. LCSARPStaticEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3.1 |
lcsARPStaticSwitchIndexSwitch Index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3.1.1 |
lcsARPStaticIndexThe entry of table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3.1.2 |
lcsARPStaticPortThe logical port for the settings.
range: 1 - port number.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3.1.3 |
lcsARPStaticVlanIDThe vlan id for the settings.
range: 1-4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3.1.4 |
lcsARPStaticMACAddressAllowed Source MAC address in ARP request packets.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3.1.5 |
lcsARPStaticIPAddressAllowed Source IP address in ARP request packets.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3.1.6 |
lcsARPStaticRowStatusThis object indicates the status of this entry, and is
used to create/delete entries. Any object in an entry of
this table may be modified while the value of the
corresponding instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.3.1.7 |
lcsARPDynamicTableThe ARP Dynamic Table. SEQUENCE OF LCSARPDynamicEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.4 |
lcsARPDynamicEntryThe ARP Dynamic Entry. LCSARPDynamicEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.4.1 |
lcsARPDynamicIndexThe entry of table. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.4.1.1 |
lcsARPDynamicPortSwitch Port Number for which the entries are displayed.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.4.1.2 |
lcsARPDynamicVLANIdVLAN-ID in which the ARP traffic is permitted.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.4.1.3 |
lcsARPDynamicMACAddressUser MAC address of the entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.4.1.4 |
lcsARPDynamicIPAddressUser IP address of the entry.ro IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.4.1.5 |
lcsARPDynamicToStaticCmdEnable the Global ARP Inspection or disable the Global
ARP Inspection.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.1.4.1.6 |
lcsARPConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.200 |
lcsARPCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.200.1 |
lcsARPGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.2.200.2 |
lcsDHCPSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3 |
lcsDHCPSnoopingConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.1 |
lcsDHCPSnoopingModedefault: 0
0: disable
1: enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.1.1 |
lcsDHCPSnoopingPortModeConfigurationTable SEQUENCE OF LCSDHCPSnoopingPortModeConfigurationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.1.2 |
lcsDHCPSnoopingPortModeConfigurationEntry LCSDHCPSnoopingPortModeConfigurationEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.1.2.1 |
lcsDHCPSnoopingPortModeConfigurationPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.1.2.1.1 |
lcsDHCPSnoopingPortModeConfigurationModedefault: 1
0: trust port mode
1: untrust port moderw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.1.2.1.2 |
lcsDHCPSnoopingStatisticsTable SEQUENCE OF LCSDHCPSnoopingStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2 |
lcsDHCPSnoopingStatisticsEntry LCSDHCPSnoopingStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1 |
lcsDHCPSnoopingStatisticsPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.1 |
lcsDHCPSnoopingStatisticsCleardefault: 0
0: none
1: clearrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.2 |
lcsDHCPSnoopingRxDiscoverro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.3 |
lcsDHCPSnoopingRxOfferro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.4 |
lcsDHCPSnoopingRxRequestro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.5 |
lcsDHCPSnoopingRxDeclinero Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.6 |
lcsDHCPSnoopingRxACKro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.7 |
lcsDHCPSnoopingRxNAKro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.8 |
lcsDHCPSnoopingRxReleasero Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.9 |
lcsDHCPSnoopingRxInformro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.10 |
lcsDHCPSnoopingRxLeaseQueryro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.11 |
lcsDHCPSnoopingRxLeaseUnassignedro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.12 |
lcsDHCPSnoopingRxLeaseUnknownro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.13 |
lcsDHCPSnoopingRxLeaseActivero Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.14 |
lcsDHCPSnoopingTxDiscoverro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.15 |
lcsDHCPSnoopingTxOfferro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.16 |
lcsDHCPSnoopingTxRequestro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.17 |
lcsDHCPSnoopingTxDeclinero Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.18 |
lcsDHCPSnoopingTxACKro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.19 |
lcsDHCPSnoopingTxNAKro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.20 |
lcsDHCPSnoopingTxReleasero Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.21 |
lcsDHCPSnoopingTxInformro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.22 |
lcsDHCPSnoopingTxLeaseQueryro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.23 |
lcsDHCPSnoopingTxLeaseUnassignedro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.24 |
lcsDHCPSnoopingTxLeaseUnknownro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.25 |
lcsDHCPSnoopingTxLeaseActivero Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.26 |
lcsDHCPSnoopingRxDiscardedChecksumErrorro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.27 |
lcsDHCPSnoopingRxDiscardedFromUntrustedro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.3.2.1.28 |
lcsDHCPRelay OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4 |
lcsDHCPRelayConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.1 |
lcsDHCPRelayModedefault: 0
0: disable
1: enable
We need at least one serverrw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.1.1 |
lcsDHCPRelayServerrw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.1.2 |
lcsDHCPRelayInformationModedefault: 0
0: disable
1: enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.1.3 |
lcsDHCPRelayInformationPolicydefault: 0
0: replace
1: keep
2: droprw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.1.4 |
lcsDHCPRelayStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2 |
lcsDHCPRelayServerStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1 |
lcsServerStatTransmitToServerro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1.1 |
lcsServerStatTransmitErrorro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1.2 |
lcsServerStatReceiveFromServerro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1.3 |
lcsServerStatReceiveMissingAgentOptionro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1.4 |
lcsServerStatReceiveMissingCircuitIDro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1.5 |
lcsServerStatReceiveMissingRemoteIDro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1.6 |
lcsServerStatReceiveBadCircuitIDro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1.7 |
lcsServerStatReceiveBadRemoteIDro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.1.8 |
lcsDHCPRelayClientStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.2 |
lcsClientStatTransmitToClientro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.2.1 |
lcsClientStatTransmitErrorro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.2.2 |
lcsClientStatReceivefromClientro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.2.3 |
lcsClientStatReceiveAgentOptionro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.2.4 |
lcsClientStatReplaceAgentOptionro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.2.5 |
lcsClientStatKeepAgentOptionro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.2.6 |
lcsClientStatDropAgentOptionro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.4.2.2.7 |
lcsPortSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5 |
lcsPortSecLimitCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1 |
lcsPortSecLimitCtrlSystemConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.1 |
lcsPortSecurityAgingdefault: 0
0: disable
1: enablerw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.1.1 |
lcsPortSecurityAgingPerioddefault: 3600, range: 10-10000000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.1.2 |
lcsPortSecurityHoldTimedefault: 300, range: 10-10000000rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.1.3 |
lcsPortSecLimitCtrlTable SEQUENCE OF LCSPortSecLimitCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2 |
lcsPortSecLimitCtrlEntry LCSPortSecLimitCtrlEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1 |
lcsPortSecLimitCtrlPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.1 |
lcsPortSecLimitCtrlPortModedefault: 0
0: disable
1: enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.2 |
lcsPortSecLimitCtrlPortLimitdefault: 4, range: 1-1024rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.3 |
lcsPortSecLimitCtrlPortViolationmModedefault: 0
0: Protect
1: Restrict
2: Shutdownrw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.4 |
lcsPortSecLimitCtrlPortViolationmLimitdefault: 4, range: 1-1024rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.5 |
lcsPortSecLimitCtrlPortStatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.6 |
lcsPortSecLimitCtrlPortReOpendefault: 0
0: none
1: reopenrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.7 |
lcsPortSecLimitCtrlPortStickydefault: 0
0: disable
1: enablerw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.8 |
lcsPortSecLimitCtrlPortCleardefault: 0
1: clearrw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.1.2.1.9 |
lcsPortSecSwitchStatusTable SEQUENCE OF LCSPortSecSwitchStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2 |
lcsPortSecSwitchStatusEntry LCSPortSecSwitchStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2.1 |
lcsPortSecSwitchStatusPort Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2.1.1 |
lcsPortSecSwitchStatusViolationmModeShows the configured Violation Mode of the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2.1.3 |
lcsPortSecSwitchStatusStateShows the current state of the port : Disabled, Ready, Limit Reached, Shutdown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2.1.4 |
lcsPortSecSwitchStatusMACCountCurrentro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2.1.5 |
lcsPortSecSwitchStatusMACCountViolatingro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2.1.6 |
lcsPortSecSwitchStatusMACCountLimitro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2.1.7 |
lcsPortSecSwitchStatusClearRemove all MAC addresses on all VLANs on this port.rw Integer32 (0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.2.1.8 |
lcsPortSecPortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3 |
lcsPortSecPortStatusPortport number
default: 1
range: 1 - port number.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.1 |
lcsPortSecPortStatusTable SEQUENCE OF LCSPortSecPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.2 |
lcsPortSecPortStatusEntry LCSPortSecPortStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.2.1 |
lcsPortSecPortStatusIndex Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.2.1.1 |
lcsPortSecPortStatusMACAddressMAC address that is seen on this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.2.1.2 |
lcsPortSecPortStatusVLANIdVLAN ID that is seen on this portro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.2.1.3 |
lcsPortSecPortStatusStateIndicates whether the corresponding MAC address is violating
(administrative user has configured the interface in Restrict mode and the MAC address is blocked),
blocked, or forwarding.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.2.1.4 |
lcsPortSecPortStatusAgeAndHoldro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.2.1.5 |
lcsPortSecPortStatusClearRemove particular MAC addresses from MAC table
1:clearrw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.5.3.2.1.6 |
lcsAccessManagement OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6 |
lcsAccessMgmtConf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1 |
lcsAccessMgmtConfModeIndicates the access management mode operation.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.1 |
lcsAccessMgmtConfTableThe Access Mgmt Conf Table. SEQUENCE OF LCSAccessMgmtConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2 |
lcsAccessMgmtConfEntryThe Access Mgmt Conf Entry LCSAccessMgmtConfEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1 |
lcsAccessMgmtIndexThe Access Management config index.
range : 1-16. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1.1 |
lcsAccessMgmtVlanIDThe VLAN ID for the access management entry.
range: 1-4094.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1.2 |
lcsAccessMgmtStartIpAddressThe start IP address for the access management
entry.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1.3 |
lcsAccessMgmtEndIpAddressThe end IP address for the access management
entry.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1.4 |
lcsAccessMgmtHttpHttpsIndicates that the host can access the switch from
HTTP/HTTPS interface if the host IP address matches the IP
address range provided in the entry.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1.5 |
lcsAccessMgmtSNMPIndicates that the host can access the switch from SNMP
interface if the host IP address matches the IP address
range provided in the entry.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1.6 |
lcsAccessMgmtTelnetSSHIndicates that the host can access the switch from
TELNET/SSH interface if the host IP address matches
the IP address range provided in the entry.rw AdminMode .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1.7 |
lcsAccessMgmtRowStatusThis object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this
table may be modified while the value of the corresponding
instance of this object is active(1).
createAndGo, notReady not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.1.2.1.8 |
lcsAccessMgmtStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.2 |
lcsAccessMgmtStatisticsClearClear all statistics.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.2.1 |
lcsAccessMgmtStatisticsTableThe Access Mgmt Statistics Table. SEQUENCE OF LCSAccessMgmtStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.2.2 |
lcsAccessMgmtStatisticsEntryThe Access Mgmt Statistics Entry. LCSAccessMgmtStatisticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.2.2.1 |
lcsAccessMgmtStatisticsInterfaceThe interface type through which the remote host can
access the switch.
1: HTTP,
2: HTTPs,
3: SNMP,
4: TELNET,
5: SSH Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.2.2.1.1 |
lcsAccessMgmtStatisticsReceivedPacketsNumber of received packets from the interface when
access management mode is enabled.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.2.2.1.2 |
lcsAccessMgmtStatisticsAllowedPacketsNumber of allowed packets from the interface when
access management mode is enabled.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.2.2.1.3 |
lcsAccessMgmtStatisticsDiscardedPacketsNumber of discarded packets from the interface when
access management mode is enabled.ro Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.6.2.2.1.4 |
lcsHTTPS OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.8 |
lcsHTTPSCertificateMaintain2: Upload
3: Generaterw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.8.4 |
lcsHTTPSCertificatePassPhraseEnter the pass phrase in this field if your uploading certificate is protected by a specific passphrase.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.8.5 |
lcsHTTPSCertificateUploaddefault: 0
0: TFTP
1: URLrw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.8.6 |
lcsHTTPSFileUploadFileURLTFTP: filename
URL: URLrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.8.7 |
lcsHTTPSFileUploadTFTPServerTFTP server IP addressrw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.8.8 |
lcsHTTPSApply1: apply the above https settingsrw Integer32(0|1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.8.9 |
lcsHTTPSCertificateStatusDisplay the current status of certificate on the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.8.10 |
lcsAuthMethod OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9 |
lcsAuthMethodConfigTableThe Auth Method Config Table. SEQUENCE OF LCSAuthMethodConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.1 |
lcsAuthMethodConfigEntryThe Auth Method Config Entry. LCSAuthMethodConfigEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.1.1 |
lcsAuthMethodConfigClient1: console.
2: telnet.
3: ssh.
4: http.
5: https. Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.1.1.1 |
lcsAuthMethodConfigMethod1Methods that involves remote servers are timed out if the
remote servers are offline.Each method is tried from left to
right and continues until a method either approves or
rejects a user.
0: no, Authentication is disabled and login is not possible.
1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch.
2: local, Use the local user database on the switch for
authentication.
3: radius, Use remote RADIUS server(s) for authentication.
4: tacacs+, Use remote TACACS+ server(s) for authentication.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.1.1.2 |
lcsAuthMethodConfigMethod2Methods that involves remote servers are timed out if the
remote servers are offline.Each method is tried from left to
right and continues until a method either approves or
rejects a user.
0: no, Authentication is disabled and login is not possible.
1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch.
2: local, Use the local user database on the switch for
authentication.
3: radius, Use remote RADIUS server(s) for authentication.
4: tacacs+, Use remote TACACS+ server(s) for authentication.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.1.1.3 |
lcsAuthMethodConfigMethod3Methods that involves remote servers are timed out if the
remote servers are offline.Each method is tried from left to
right and continues until a method either approves or
rejects a user.
0: no, Authentication is disabled and login is not possible.
1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch.
2: local, Use the local user database on the switch for
authentication.
3: radius, Use remote RADIUS server(s) for authentication.
4: tacacs+, Use remote TACACS+ server(s) for authentication.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.1.1.4 |
lcsAuthMethodConfigMethod4Methods that involves remote servers are timed out if the
remote servers are offline.Each method is tried from left to
right and continues until a method either approves or
rejects a user.
0: no, Authentication is disabled and login is not possible.
1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch.
2: local, Use the local user database on the switch for
authentication.
3: radius, Use remote RADIUS server(s) for authentication.
4: tacacs+, Use remote TACACS+ server(s) for authentication.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.1.1.5 |
lcsAuthMethodConfigServicePortThe network port number this client bound to provide service.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.1.1.6 |
lcsCommandAuthorizationMethodTableThe Command Authorized Method Config Table. SEQUENCE OF LCSCommandAuthorizationMethodEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.2 |
lcsCommandAuthorizationMethodEntryThe Command Authorized Method Config Entry. LCSCommandAuthorizationMethodEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.2.1 |
lcsCommandAuthorizationMethodClient1: console.
2: telnet.
3: ssh.
4: http.
5: https. Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.2.1.1 |
lcsCommandAuthorizationMethodMethodMethod can be set to one of the following values:
0:no: Command authorization is disabled.
User is granted access to CLI commands according to his privilege level.
4:tacacs: Use remote TACACS+ server(s) for command authorization.
If all remote servers are offline, the user is granted access to CLI commands
according to his privilege level.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.2.1.2 |
lcsCommandAuthorizationMethodCmdLvlAuthorize all commands with a privilege level higher than or equal to this level.
Valid values are in the range 0 to 15.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.2.1.3 |
lcsCommandAuthorizationMethodCfgCmdAlso authorize configuration commands.
0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.2.1.4 |
lcsAccountingMethodTableThe Accounting Method Config Table. SEQUENCE OF LCSAccountingMethodEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.3 |
lcsAccountingMethodEntryThe Accounting Method Config Entry. LCSAccountingMethodEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.3.1 |
lcsAccountingMethodClient1: console.
2: telnet.
3: ssh.
4: http.
5: https. Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.3.1.1 |
lcsAccountingMethodMethodMethod can be set to one of the following values:
0:no: Accounting is disabled.
4:tacacs: Use remote TACACS+ server(s) for accounting.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.3.1.2 |
lcsAccountingMethodCmdLvlEnable accounting of all commands with a privilege level higher than or equal to this level.
Valid values are in the range 0 to 15. Leave the field empty to disable command accounting.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.3.1.3 |
lcsAccountingMethodCfgCmdEnable exec (login) accounting.
0:Disable
1:Enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.9.3.1.4 |
lcsDot1xSupplicant OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500 |
lcsDot1xSupplicantSystemModeGlobal 802.1X Supplicant Enable / Disable Moderw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.1 |
lcsDot1xSupplicantSystemEapMethodsEAP Methods which will be support in communication with the EAP Authenticator.rw Bits .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.2 |
lcsDot1xSupplicantTableTable of all available supplicants and their configuration and status SEQUENCE OF LCSDot1xSupplicantEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3 |
lcsDot1xSupplicantEntryConfiguration and status for a supplicant LCSDot1xSupplicantEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1 |
lcsDot1xSupplicantIndexIndex of the supplicant, 1-5 Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.1 |
lcsDot1xSupplicantPortNumberPort on which the supplicant operates.
Port 0 is equivalent to lcsDot1xSupplicantConfigMode disable.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.2 |
lcsDot1xSupplicantConfigModeConfigured mode of the supplicantrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.3 |
lcsDot1xSupplicantConfigUsernameUsername the supplicant should use for authenticationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.4 |
lcsDot1xSupplicantConfigPasswordPassword the supplicant should use for authentication.
Only reads '********' for a set password and '' (empty)
for unset password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.5 |
lcsDot1xSupplicantStatusActiveOperating status of the supplicantro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.6 |
lcsDot1xSupplicantStatusAuthorizedAuthorized status of the supplicantro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.7 |
lcsDot1xSupplicantStatusLinkLink status of port of the supplicantro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.8 |
lcsDot1xSupplicantStatusLogoffIf the supplicant did logoff from the authenticatorro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.9 |
lcsDot1xSupplicantStatusStringLast status message of the supplicantro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.10 |
lcsDot1xSupplicantStatusResultResult from the supplicant, unknown if authentication was not yet completedro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.3.1.11 |
lcsDot1xSupplicantSystemMacModeUse the system mac or separate port mac during authenticationrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.3.1500.4 |
lcsMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4 |
lcsRestartDeviceCommand to restart the device.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.1 |
lcsFactoryDefaultsReset the configuration to Factory Defaults keep-ip.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.2 |
lcsSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.3 |
lcsSoftwareUsernameGet/Set the username for 'tftp' firmware upgrading.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.3.1 |
lcsSoftwarePasswordGet/Set the password for 'tftp' firmware upgrading.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.3.2 |
lcsSoftwareIpAddressGet/Set the firmware tftp server.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.3.3 |
lcsSoftwareFileNameGet/Set the path and filename for firmware upgrading.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.3.4 |
lcsSoftwareUpgradeCmdFirmware upgrade command.
noAction(0 )- do nothing (read only).
tftpUpgrade (1) - activate 'tftp' firmware upgraderw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.3.5 |
lcsSoftwareImageSelectionCmdActivate firmware image selection.
noAction(0) - do nothing - returned upon get.
activate(1) - activate firmware image selection.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.3.6 |
lcsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4 |
lcsSaveStartCmdThis copies running-config to startup-config,
thereby ensuring that the currently active
configuration will be used at the next reboot.rw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.1 |
lcsConfigUsernameGet/Set the username for 'tftp' 'upload config' or 'download config'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.2 |
lcsConfigPasswordGet/Set the password for 'tftp' 'upload config' or 'download config'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.3 |
lcsConfigIpAddressGet/Set the IP address for 'tftp' 'upload config'
or 'download config'.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.4 |
lcsConfigFilenameGet/Set the filename in switch for 'tftp'
'upload config' or 'download config'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.5 |
lcsConfigFileTableThe config file tabe. SEQUENCE OF LCSConfigFileEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.6 |
lcsConfigFileEntryan entry in the config file tabe. LCSConfigFileEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.6.1 |
lcsConfigFileIndexThe config file index. Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.6.1.1 |
lcsShowConfigFileNameShows the config file name. Without config filename:'NewConfig'
is temp file when 'activate download
config' can 'create new file' and 'change create filename'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.6.1.2 |
lcsActivateConfigCmdActivate config command.
noAction(0) : do nothing (read only).
activate(1) : activate the configrw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.6.1.3 |
lcsDeleteConfigCmdDelete config command.
noAction(0) : do nothing (read only).
activate(1) : delete the configrw ActivateCmd .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.6.1.4 |
lcsDownloadConfigCmdDownload config command.
noAction (0) - do nothing (read only).
tftpUpload (1) - activate 'tftp' config download.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.6.1.5 |
lcsUploadConfigCmdUpload config command.
noAction (0) - do nothing (read only).
tftpDownload (1) - activate 'tftp' config upload.
For merge/replace running-config:
1:merge
3:replacerw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.4.6.1.6 |
lcsDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5 |
lcsPingIpAddressThe destination IP Address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.1 |
lcsPingSizeSize of ICMP echo packet.
range : 60-1400, default : 64.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.2 |
lcsDoPingConfigDo ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway.rw Integer32(1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.3 |
lcsPingResultShow ping result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.4 |
lcsPing6IpAddressThe destination IPv6 Address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.5 |
lcsPing6SizeSize of ICMP echo packet.
range : 60-1400.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.6 |
lcsPing6EgressInterfaceThe VLAN ID (VID) of the specific egress IPv6 interface which ICMP packet goes.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.7 |
lcsDoPing6ConfigDo ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway.rw Integer32(1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.8 |
lcsPing6ResultShow ping result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.9 |
lcstracerouteIpAddressThe destination IP Address.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.10 |
lcstracerouteWaittimeSpecify wait time for waiting probe packets come back.
range : 1-60(sec), default : 5(sec).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.12 |
lcstracerouteMaxTTLSpecify max TTL.
range : 1-255, default : 30.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.13 |
lcstracerouteNqueriesSpecify number of probe packets.
range : 1-10, default : 3.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.14 |
lcsDotracerouteConfigDo traceroute-config.
Get this OID always return zero.
1 - ping. Uses the traceroute program to get
ip address of the middle gateway.rw Integer32(1) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.15 |
lcstracerouteResultShow traceroute result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.16 |
lcsCableDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.17 |
lcsCableDiagnosticsTestRun Cable Diagnostics.
port, range : 1 - port number.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.17.1 |
lcsCableDiagnosticsTable SEQUENCE OF LCSCableDiagnosticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.17.2 |
lcsCableDiagnosticsEntry LCSCableDiagnosticsEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.17.2.1 |
lcsCableDiagnosticsPortport index Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.17.2.1.1 |
lcsCableDiagnosticsLinkStatusThe status of the cable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.17.2.1.2 |
lcsCableDiagnosticsTestResultTest Result of the cable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.17.2.1.3 |
lcsCableDiagnosticsLengthThe length (in meters) of the cable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.5.17.2.1.4 |
lcsSwitchRebootSchedule OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.6 |
lcsSwitchRebootModeSwitch Reboot Mode.
0:disable
1:enablerw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.6.1 |
lcsSwitchRebootTimeTableConfigure the Switch reboot time. SEQUENCE OF LCSSwitchRebootTimeEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.6.2 |
lcsSwitchRebootTimeEntry LCSSwitchRebootTimeEntry .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.6.2.1 |
lcsSwitchRebootWeekIndexSwitch reboot week index.
1: Sun, 2: Mon, 3:Tue, 4: Wed, 5: Thu, 6: Fri, 7: Sat Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.6.2.1.1 |
lcsSwitchRebootTimeHourSwitch Reboot Time (Hour). Range: 0-23.
-1:disablerw Integer32 (-1..23) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.6.2.1.2 |
lcsSwitchRebootTimeMinuteSwitch Reboot Time (Minute). Range:0,5,10,...,55.
-1:disablerw Integer32 (-1..55) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.6.2.1.3 |
lcsiPerf OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7 |
lcsiPerfMethodThe measuring method of iPerf.
2:iPerf version 2
3:iPerf version 3rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7.2 |
lcsiPerfHostThe address of iPerf server.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7.3 |
lcsiPerfPortThe listen port of iPerf server. The default value is 5001 for iPerf, 5201 for iPerf3.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7.4 |
lcsiPerfTimeThe time in seconds to transmit for (default 10 secs).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7.5 |
lcsiPerfIntervalThe time in seconds between periodic bandwidth reports (default no periodic reports).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7.6 |
lcsiPerfTTLThe time-to-live, for multicast (default 1).rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7.7 |
lcsiPerfStartStart iPerf
1:Start.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7.8 |
lcsiPerfResultTest result of iPerfro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.4.7.9 |
lcsTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5 |
lcsTrapEvent OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1 |
lcsEmergencyThe severity level is Emergency. Emergency conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1.1 |
lcsAlertThe severity level is Alert. Alert conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1.2 |
lcsCriticalThe severity level is Critical. Critical conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1.3 |
lcsErrorThe severity level is Error. Error conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1.4 |
lcsWarningThe severity level is Warning. Warning conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1.5 |
lcsNoticeThe severity level is Notice. Notice conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1.6 |
lcsInformationalThe severity level is Informational. Informational conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1.7 |
lcsDebugThe severity level is Debug. Debug conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.1.8 |
lcsTrapVariable OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.2 |
lcsInformationTrap information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.2.1 |
lcsMacTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.100 |
lcsMacTrapEvent OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.100.1 |
lcsMacTrapAddNotificationEvent generated for a new learned mac address.
dot1qTpFdbAddress: The mac address.
dot1qFdbId: The VLAN ID.
dot1qTpFdbPort: The port the mac address was learned on. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.100.1.1 |
lcsMacTrapDelNotificationEvent generated for a deleted mac address.
dot1qTpFdbAddress: The mac address.
dot1qFdbId: The VLAN ID.
dot1qTpFdbPort: The port the mac address was known on. NOTIFICATION-TYPE .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.100.1.2 |
lcsMacTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.100.2 |
lcsMacTrapVarDelReasonThe textual reason for deletion of a mac address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.5.100.2.1 |
lcsProducts OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8 |
lcsProductsGS3126X OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3126 |
lcsProductsGS3126XP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3127 |
lcsProductsGS3128X OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3128 |
lcsProductsGS3128XP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3129 |
lcsProductsGS3152X OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3152 |
lcsProductsGS3152XP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3153 |
lcsProductsGS3152XSP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3154 |
lcsProductsGS3152P OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3155 |
lcsProductsGS3510XP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3510 |
lcsProductsGS3510X OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3511 |
lcsProductsGS3528XSP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3528 |
lcsProductsGS3528XP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3529 |
lcsProductsGS3528X OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3530 |
lcsProductsGS3528XUP OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.2356.2356.14.8.3531 |