The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.

466 objects→

Juniper-RADIUS-CLIENT-MIB

The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.

397 objects→

Juniper-UNI-ATM-MIB

The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.

380 objects→

Juniper-AAA-MIB

The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.

362 objects→

Juniper-POLICY-MIB

SNMP MIB module

348 objects→

Object Name	Syntax	OID
juniSlepMIBSThe Serial Line Encapulation Protocol (SLEP) MIB for the Juniper Networks enterprise. MODULE-IDENTITY `.1.3.6.1.4.1.4874.2.2.15`	MODULE-IDENTITY	`.1.3.6.1.4.1.4874.2.2.15`
juniSlepObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.4874.2.2.15.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4874.2.2.15.1`
juniSlepIfLayer OBJECT IDENTIFIER `.1.3.6.1.4.1.4874.2.2.15.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4874.2.2.15.1.1`
juniSlepNextIfIndexCoordinate ifIndex value allocation for entries in juniSlepIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro JuniNextIfIndex (Juniper-TC) `.1.3.6.1.4.1.4874.2.2.15.1.1.1`	JuniNextIfIndex (Juniper-TC)	`.1.3.6.1.4.1.4874.2.2.15.1.1.1`
juniSlepIfTableThe parameters for the SLEP service on this interface. SEQUENCE OF JuniSlepIfEntry `.1.3.6.1.4.1.4874.2.2.15.1.1.2`	SEQUENCE OF JuniSlepIfEntry	`.1.3.6.1.4.1.4874.2.2.15.1.1.2`
juniSlepIfEntryThe Parameters for a particular SLEP interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable. JuniSlepIfEntry `.1.3.6.1.4.1.4874.2.2.15.1.1.2.1`	JuniSlepIfEntry	`.1.3.6.1.4.1.4874.2.2.15.1.1.2.1`
juniSlepIfIndexThe ifIndex value of the corresponding ifEntry. InterfaceIndex (IF-MIB) `.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.1`	InterfaceIndex (IF-MIB)	`.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.1`
juniSlepKeepAliveTimerThe interface keep alive timer for this entry. The time in seconds that this entity will wait for sending a keep-alive-message to the remote SLEP entity, and the time in seconds that this entity will wait for the reception of a keep-alive-message from the remote SLEP entity.rw INTEGER `.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.2`	INTEGER	`.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.2`
juniSlepIfLowerIfIndexThe ifIndex of an interface over which this SLEP interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) `.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.3`	InterfaceIndexOrZero (IF-MIB)	`.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.3`
juniSlepIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniSlepIfRowStatus juniSlepIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniSlepIfIndex must have been determined previously, by reading juniSlepNextIfIndex. The interface identified by juniSlepIfLowerIfIndex must exist, and must be an interface type that permits layering of SLEP Interface above it. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) `.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.4`	RowStatus (SNMPv2-TC)	`.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.4`
juniSlepDownWhenLoopedThe down-when-looped control for this entry. This attribute determines if loop detection is enabled for the interface. If set to disable, loop detection is disabled for the interface.rw JuniEnable (Juniper-TC) `.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.5`	JuniEnable (Juniper-TC)	`.1.3.6.1.4.1.4874.2.2.15.1.1.2.1.5`
juniSlepIfStatisticsTableThe statistics for the SLEP service on this interface. SEQUENCE OF JuniSlepIfStatisticsEntry `.1.3.6.1.4.1.4874.2.2.15.1.1.3`	SEQUENCE OF JuniSlepIfStatisticsEntry	`.1.3.6.1.4.1.4874.2.2.15.1.1.3`
juniSlepIfStatisticsEntryThe statistics for a particular SLEP interface. JuniSlepIfStatisticsEntry `.1.3.6.1.4.1.4874.2.2.15.1.1.3.1`	JuniSlepIfStatisticsEntry	`.1.3.6.1.4.1.4874.2.2.15.1.1.3.1`
juniSlepIfStatsIndexThe ifIndex value of that identifies this entry. InterfaceIndex (IF-MIB) `.1.3.6.1.4.1.4874.2.2.15.1.1.3.1.1`	InterfaceIndex (IF-MIB)	`.1.3.6.1.4.1.4874.2.2.15.1.1.3.1.1`
juniSlepKeepAliveFailuresThe number of link drops due to keep-alive failures.ro Counter32 `.1.3.6.1.4.1.4874.2.2.15.1.1.3.1.2`	Counter32	`.1.3.6.1.4.1.4874.2.2.15.1.1.3.1.2`
juniSlepLinkStatusTooLongPacketsThe number of packets that were too long for this SLEP entity.ro Counter32 `.1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3`	Counter32	`.1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3`
juniSlepLinkStatusBadFCSsThe number of FCS's errors for this SLEP entity.ro Counter32 `.1.3.6.1.4.1.4874.2.2.15.1.1.3.1.4`	Counter32	`.1.3.6.1.4.1.4874.2.2.15.1.1.3.1.4`
juniSlepConformance OBJECT IDENTIFIER `.1.3.6.1.4.1.4874.2.2.15.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4874.2.2.15.4`
juniSlepCompliances OBJECT IDENTIFIER `.1.3.6.1.4.1.4874.2.2.15.4.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4874.2.2.15.4.1`
juniSlepComplianceObsolete compliance statement for entities which implement the Juniper SLEP MIB. This compliance statement became obsolete when the juniSlepDownWhenLooped object was added.obsolete Unknown `.1.3.6.1.4.1.4874.2.2.15.4.1.1`	Unknown	`.1.3.6.1.4.1.4874.2.2.15.4.1.1`
juniSlepCompliance2The compliance statement for entities which implement the Juniper SLEP MIB. Unknown `.1.3.6.1.4.1.4874.2.2.15.4.1.2`	Unknown	`.1.3.6.1.4.1.4874.2.2.15.4.1.2`
juniSlepGroups OBJECT IDENTIFIER `.1.3.6.1.4.1.4874.2.2.15.4.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4874.2.2.15.4.2`
juniSlepGroupObsolete collection of objects providing management of SLEP interfaces in a Juniper product. This group became obsolete when the juniSlepDownWhenLooped object was added.obsolete Unknown `.1.3.6.1.4.1.4874.2.2.15.4.2.1`	Unknown	`.1.3.6.1.4.1.4874.2.2.15.4.2.1`
juniSlepGroup2A collection of objects providing management of SLEP interfaces in a Juniper product. Unknown `.1.3.6.1.4.1.4874.2.2.15.4.2.2`	Unknown	`.1.3.6.1.4.1.4874.2.2.15.4.2.2`