Juniper-PPPoE-Profile-CONF
The Juniper-PPPoE-Profile-CONF MIB enables SNMP-based monitoring and management of PPPoE profile configurations on Juniper E-series routers, specifically tracking session parameters, authentication states, and interface bindings.
Imported Objects
Objects
7 total| Object Name |
|---|
juniPppoeProfileAgentThe agent capabilities definitions for the PPPoE Profile component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.34.4 |
juniPppoeProfileAgentV1The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe. These capabilities became obsolete when the duplicate MAC address indicator and AC-NAME were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.4.1 |
juniPppoeProfileAgentV2The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe. These capabilities became obsolete when support was added for PADI flag and packet trace.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.4.2 |
juniPppoeProfileAgentV3The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe. These capabilities became obsolete when service name table support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.4.3 |
juniPppoeProfileAgentV4The MIB supported by the SNMP agent for the PPPoE application in JUNOSe. These capabilities became obsolete when PADR remote-circuit-id field was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.4.4 |
juniPppoeProfileAgentV5The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.4.5 |
juniPppoeProfileAgentV6The MIB supported by the SNMP agent for the PPPoE Profile application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.34.4.6 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module