MIB Catalog

The MIB module for management of IP Multicast, including multicast routing, data forwarding, and data reception. Huawei Technologies Co.,Ltd . Supplementary information may

The MIB contains objects of module IPPOOL.

Description.

The MIB contains objects of module IP-Session interface.

The MIB module for entities implementing the IPv6 protocol.

This file describes the huawei mib implementation of ISDN

The HUAWEI PRIVATE MIB contains objects belonging to processes of the IS-IS protocol existing on the system. It defines the model used to represent data that exists elsewhere in the

The private ISIS MIB contains objects to manage the ISIS routing protocol private objects in pure IP environment.

This file is an extension of ISOLATE-MIB.

Keychain is a centralized application that provides authentication functionality to all applications that require them. It also provides dynamic change of authentic

The HUAWEI-KOMPELLA-MIB contains objects to manage KOMPELLA.

information of layer2 interface and information of hybrid port and information of trunk port

This is the layer 2 mac-address management. It contains the layer 2 mac-address forwarding information currently operating on this device. And also contains t

The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to indicate their interest in receiving mu

L2TP extended property used by Huawei Technologies Co., Ltd.

The L2Vlan MIB module is defined to manage several layer two function of Huawei Technologies co.,Ltd.

The HUAWEI-L2VPN-MIB contains objects to manage global Attributes of L2VPN.

The HUAWEI-L2VPN-OAM-MIB contains objects to manage OAM TRAP.

The HUAWEI-L2VPN-PW-APS-MIB contains objects to manage PW APS.

The HUAWEI-L3VLAN-MIB contains objects to manage level 3 vlan. Through the MIB,you can get the detail information of each vlan,such as VLANID,encapsulated typ

The HUAWEI-L3VPN-EXT-MIB contains objects to statistic L3VPN's traffic.

This mib module defines the Link Aggregation Control Protocol (LACP) MIB objects. LACP is the control protocol for implementing the link aggregation in the IEEE 802.3ad standard.

LACP extend MIB.

This file is an LDT-MIB. It provides such functions of globally enabling or disabling the LDT function, enabling the global alarm, clearing statistics on ports and configuring

This module manages huawei's Lawful interception feature.

The MIB is used for defining Huawei's ACCESS management common MIB objects.

HUAWEI-LINE-MIB is used to configure and query attributes of connections through management interfaces by users, such as the maximum number of Telnet connections an

This file is an extension of LLDP-MIB. It provides such functions of globally enabling or disabling the LLDP protocol, enabling the global alarm, clearing statistics on ports

Huawei load and backup mib.

The LoopDetect MIB module is defined to indicate loop-detect function of Huawei Technologies co.,Ltd.

HUAWEI lsp quality detect funcion.

The latest baseline.

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

Module node for qos and acl.

MIB module

MIB module

MIB module

MIB module

Please provide the descritpion.

Huawei ma5200 device mib.

The HUAWEI-MA5200-MIB contains objects of MA5200

This MIB describes objects used for mac-authentication,including configuring mac-authentication.

V1.00 The MAC-IP address bind mib is for all datacomm product.

This MIB describes objects used for MACsec.

The HUAWEI-MASTERKEY-MIB contains objects to manage the system master key. such as set and clear master key, query master key configuration and modify information. Thi

Description.

This MIB describes mDNS objects used for mDNS relay configuration.

This mib module defines the memory information. NMS can query memory utilization statistics from device by the mib.

This MIB describes objects used for Mff,including configuring mff,cofiguring network port and server's IP address, collecting user and gateway information.

Mac flapping management MIB.

The MG MIB module is defined to manage the configuration about Monitor-group.

The MIB module for MGMD Management. Huawei Technologies Co.,Ltd . Supplementary information may be available at: http://www.huawei.com

Huawei common OID MIB definition.

The HUAWEI-MINM-MIB contains objects to Manage configuration for MINM feature.

MIB description of mirror.

The MIB object implements the management of the CLI and NE users.

The HUAWEI-MODULE-INFO-MIB contains objects to describe the module information.Such as module BOM description string.

MIB module

The HUAWEI-MP-MIB provides read access to MP(Multilink PPP) link status information. The information available through this MIB includes: the father channel, the bundled son

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and

This MIB is used for defining the HUAWEI private extended Multiprotocol Label Switching (MPLS) MIB object. All MIB objects are used to describe private

The MIB is used for configuring and querying the range of MPLS label and MPLS default ttl.

All rights reserved

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, I

This MIB is used for defining the HUAWEI private extended Transport Profile of Multiprotocol Label Switching (MPLS-TP) MIB object. All MIB objects are used to de

This MIB contains private managed object and notification trap definitions for MPLS LDP.

This MIB provides management of MPLS basic configurations. It is an extension of MPLS-LSR-STD-MIB.

The HUAWEI-MPLSOAM-MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost o

MIB module

The Mqe MIB module is defined to manage the configuration for FCC, RET, QoE.

The MIB module for management of PIM routers. Huawei Technologies co.,Ltd . Supplementary information may be available at: http://w

This module include the information about MSTP protocol in the bridge. The information can be read and some of them can be set.

V01_01 һƶ mta MIB:HUAWEI-MTA-MIB.mib V1.0 汾ɹMIB׼ίԱỷ MTA MIBС鸺ƶרУ tangrong 17270/huawei, liguanrong 26321/huawei, liaoshunquan 24705/huawei, wangxinran 19281/huawei, liuguoping 17

The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to indicate their interest in receiving mu

MIB module

MIB module

This MIB file defines the MIB objects of the neighbor automatic communication (NAC) protocol. This MIB file contains two tables and three trap nodes. The NAC modul

The MIB module for nap between host and netmanager.

V1.00 The NAT-EUDM mib is for Eudemon product.

The MIB contains objects of S9300 NAT features , referencing the RFC4004.

V1.00 The NAT mib is for all datacomm product..

Please provide the descritpion.

This file is used for NDB alarm.

This MIB contains objects to manage the NDEC device.

This defines the MIB for the Netconf Agent

The private mib file includes the general extent information of the device.hwDatacomm(25).htNetStream(110)

The MIB is used for defining HUAWEI NGADSL LINE MIB objects, which expand from RFC4706 ADSL2-LINE MIB.

This MIB provides mechanisms to monitor a NTP server.

This MIB is to provide TRAP support for NTP. hwNtpStateChangeTrap & hwNtpSysPeerChangeTrap are added to notify the NTP state change & system peer change information

The private mib file includes the general extent information of the device.hwDatacomm(25).hwNtpV3(234)

The MIB module for nvo3 management.

This MIB module provides certain configuration functions for the CPU overload control feature. The functions include the configuration of the mapping relation between the OLC queue a

This MIB contains private managed object and notification trap definitions for Openflow.

The HUAWEI-OSPFV2-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in the sy

The MIB module for OSPF version 3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC draft-ietf-ospf

V4.11 delete MIB nodes .

This mib is supplementary for RMON-MIB(rfc2819). It includes only one table. The mib defines two new objects. One is to set the alarm object by expression,

V1.00 The HUAWEI-SLOG-EUDM-MIB contains objects to manage the security log for firewall product.

MIB of Port Group Isolation module The HUAWEI-PGI-MIB is defined to configure and display the status of port group.

The Mib module for management of IP Multicast, including multicast routing, data forwarding, and data reception. Huawei Technologies co.,Ltd . Supplementary information may

The MIB module for management of PIM routers. Huawei Technologies co.,Ltd . Supplementary information may be available at: http://www.huawei.com

The HUAWEI-POE-MIB contains objects to manage POE.

The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB

The MIB contains objects of module PORTAL.

The PortBlock MIB module is defined to indicate port block function of Huawei Technologies co., Ltd.

The POS MIB module is used to manage POS-Access.

This MIB is used for defining Power Monitor management MIB objects.

This MIB is mainly used to configure PPP , PPP MRU negotiation, MP binding with Mp-Group, and PAP/Chap authentication .

MIB module

This mib is used for defining the IPMB Aiu Proctect MIB objects of the protection group and smart link monitor group.

The HUAWEI-PTP-MIB contains objects to manage PTP.

Pseudo Wire Emulation Edge-to-Edge (PWE3) is an end-to-end L2 service bearing technology, that belongs to L2 VPN in the P2P mode. The system implements the PWE3 architecture through

This MIB Module provides Textual Conventions and OBJECT-IDENTITY Objects to be used in networks implementing PW services.