HUAWEI-LswMix-MIB
Standard SNMP MIB module defining data structures for HUAWEI-LswMix-MIB.
Imported Objects
Objects
11 total| Object Name |
|---|
hwLswMix MODULE-IDENTITY .1.3.6.1.4.1.2011.2.23.1.17 |
hwLswLastSwitchDateThis object indicates the date of the most recent change to the mpu(Main Processing Unit).ro INTEGER .1.3.6.1.4.1.2011.2.23.1.17.1 |
hwLswLastSwitchTimeThis object indicates the time of the most recent change to the mpu.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.17.2 |
hwLswMpuSwitchsNumThis object indicates the total times of the mpu switched since the system start up.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.17.3 |
hwLswMpuSwitchSetting this object will immediately switch the standby mpu to master mpu. Read is not supported.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.17.4 |
hwLswXSlotTableThe source main table. SEQUENCE OF HwLswXSlotEntry .1.3.6.1.4.1.2011.2.23.1.17.5 |
hwLswXSlotEntryAn entry in the source main table. HwLswXSlotEntry .1.3.6.1.4.1.2011.2.23.1.17.5.1 |
hwLswMainCardBoardStatusThe value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state of lpu(Line Processing Unit)ro Enumeration .1.3.6.1.4.1.2011.2.23.1.17.5.1.1 |
hwLswCrossBarStatusThe value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.17.5.1.2 |
hwsMixTrapMib OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.23.1.17.10 |
hwSlaveSwitchOverAn hwSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.23.1.17.10.1 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.