HUAWEI-LSW-DEV-ADM-MIB
AI MIB Summary
HUAWEI-LSW-DEV-ADM-MIB provides management access to administrative parameters and operational states for Huawei S-series and CloudEngine series Layer 2/3 switches, specifically exposing device configuration, interface status, and system control variables via SNMP. This module enables network engineers to monitor and configure critical switch functions such as port administration, VLAN settings, and system resource allocation without requiring direct CLI access.
The latest baseline.
Main OID:
hwLswDeviceAdmin.1.3.6.1.4.1.2011.2.23.1.18
75
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
hwLswDeviceAdminThe latest baseline. MODULE-IDENTITY .1.3.6.1.4.1.2011.2.23.1.18 |
hwLswSystemPara OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.23.1.18.1 |
hwLswSysIpAddrSystem IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address.ro IpAddress .1.3.6.1.4.1.2011.2.23.1.18.1.1 |
hwLswSysIpMaskMask of the system IP address.ro IpAddress .1.3.6.1.4.1.2011.2.23.1.18.1.2 |
hwLswSysCpuRatioCPU usage of the system in accuracy of 1%, and the range of value is 1 to 100.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.1.3 |
hwLswSysVersionInformation of the system version.ro DisplayString .1.3.6.1.4.1.2011.2.23.1.18.1.4 |
hwLswSysTimeSystem time.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.18.1.5 |
hwLswSysUNMCastDropEnableEnable or disable discarding of unknown multicast packet.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.18.1.6 |
hwLswSysManagementVlanSystem management VLAN.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.18.1.7 |
hwLswSysVlanRangeSystem VLAN range, if set VLAN range, must bind mangement IP/Mask.rw DisplayString .1.3.6.1.4.1.2011.2.23.1.18.1.8 |
hwLswSysManagementIpAddrSystem IP address.rw IpAddress .1.3.6.1.4.1.2011.2.23.1.18.1.9 |
hwLswSysManagementIpMaskMask of the system IP address.rw IpAddress .1.3.6.1.4.1.2011.2.23.1.18.1.10 |
hwMacAddressCountPortSupportted MAC address number on port.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.1.11 |
hwMacAddressCountMachineSupportted MAC address number on machine.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.1.12 |
hwLswSysPhyMemoryThe memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.2011.2.23.1.18.1.13 |
hwLswSysMemoryThe memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.2011.2.23.1.18.1.14 |
hwLswSysMemoryUsedThe system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.2011.2.23.1.18.1.15 |
hwLswSysMemoryRatioThe percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hwLswSysMemoryUsed hwLswSysMemoryRatio = -------------------- hwLswSysMemory For the distributed device, it represents the memory used ratio on the master slot.ro Unsigned32 .1.3.6.1.4.1.2011.2.23.1.18.1.16 |
hwLswSysTemperatureThe temperature of system. For the distributed device, it represents the temperature on the master slot.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.1.17 |
hwLswSlotConf OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.23.1.18.4 |
hwLswFrameTableFrame information table. SEQUENCE OF HwLswFrameEntry .1.3.6.1.4.1.2011.2.23.1.18.4.2 |
hwLswFrameEntryFrame description table entry. HwLswFrameEntry .1.3.6.1.4.1.2011.2.23.1.18.4.2.1 |
hwLswFrameIndexThe unique index of frame.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.2.1.1 |
hwLswFrameTypeFrame type.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.2.1.2 |
hwLswFrameDescFrame description.rw DisplayString .1.3.6.1.4.1.2011.2.23.1.18.4.2.1.3 |
hwLswSlotNumberNumber of slots of the current frame.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.2.1.4 |
hwLswFrameAdminStatusThe Status of frame.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.2.1.5 |
hwLswSlotTableSlot description table. SEQUENCE OF HwLswSlotEntry .1.3.6.1.4.1.2011.2.23.1.18.4.3 |
hwLswSlotEntrySlot description table entry. HwLswSlotEntry .1.3.6.1.4.1.2011.2.23.1.18.4.3.1 |
hwLswSlotIndexSlot index. When the slot is empty, listed as vacant slot.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.1 |
hwLswSlotTypeSlot type. BOM number is recommended.ro HwLswTypeOfSlot .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.2 |
hwLswSlotDescSlot description.rw DisplayString .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.3 |
hwLswSlotCpuRatioCPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.4 |
hwLswSlotPcbVersionHardware version of the board.ro DisplayString .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.5 |
hwLswSlotSoftwareVersionSoftware version of the board.ro DisplayString .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.6 |
hwLswSubslotNumberNumber of the cards of the board.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.7 |
hwLswSlotAdminStatusSlot status.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.8 |
hwLswSlotOperStatusSlot operation status.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.9 |
hwLswSlotPhyMemoryThe memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.10 |
hwLswSlotMemoryThe memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.11 |
hwLswSlotMemoryUsedThe system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.12 |
hwLswSlotMemoryRatioThe percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform.ro Unsigned32 .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.13 |
hwLswSlotTemperatureThe temperature of system on the board.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.14 |
hwLswSubslotTableSubslot description table. SEQUENCE OF HwLswSubslotEntry .1.3.6.1.4.1.2011.2.23.1.18.4.4 |
hwLswSubslotEntrySubslot description table entry. HwLswSubslotEntry .1.3.6.1.4.1.2011.2.23.1.18.4.4.1 |
hwLswSubslotIndexSubslot index.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.4.1.1 |
hwLswSubslotTypeType of the pinch board in the subslot.ro HwLswTypeOfSlot .1.3.6.1.4.1.2011.2.23.1.18.4.4.1.2 |
hwLswSubslotPortNumNumber of physical ports in the pinch board.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.4.1.3 |
hwLswSubslotAdminStatusStatus of the pinch board in the subslot.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.4.1.4 |
hwLswSubslotFirstIfIndexThe value of ifIndex of the first physical port in the pinch board.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.4.1.5 |
hwLswPortTablePort configuration table. SEQUENCE OF HwLswPortEntry .1.3.6.1.4.1.2011.2.23.1.18.4.5 |
hwLswPortEntryPort configuration table entry. HwLswPortEntry .1.3.6.1.4.1.2011.2.23.1.18.4.5.1 |
hwLswPortIndexThe port number on the device. The first port number is 1, which is reserved if the port does not exist.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.5.1.1 |
hwLswPortTypeNormally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.5.1.2 |
hwLswPortIfindexThe value of ifIndex of the port.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.5.1.3 |
hwLswPortIsPluggedPort is plugged or not.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.5.1.4 |
hwLswPortLoopbackTablePort loopback test table. SEQUENCE OF HwLswPortLoopbackEntry .1.3.6.1.4.1.2011.2.23.1.18.4.6 |
hwLswPortLoopbackEntryPort loopback test table entry. HwLswPortLoopbackEntry .1.3.6.1.4.1.2011.2.23.1.18.4.6.1 |
hwLswPortLoopbackIsSupportThe loopback type can be supported by current port.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.6.1.1 |
hwLswPortLoopbackOperatePort loopback operate type. Read operation not supported.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.6.1.2 |
hwLswPortLoopbackResultLoopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.6.1.3 |
hwLswPortLoopbackAutoStopSupportWhether this port support NEED-MANNUL-NOLOOP mode or not.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.6.1.4 |
hwLswPortLoopbackRemoteResultThe remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.6.1.5 |
hwLswPortLoopbackLocalResultThe local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.6.1.6 |
hwLswPortLoopbackInternalResultThe internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.6.1.7 |
hwLswPortLoopbackExternalResultThe external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.18.4.6.1.8 |
hwLswFabricTableThis table contains the information of fabric. SEQUENCE OF HwLswFabricEntry .1.3.6.1.4.1.2011.2.23.1.18.4.7 |
hwLswFabricEntryAn entry in hwLswFabricTable. HwLswFabricEntry .1.3.6.1.4.1.2011.2.23.1.18.4.7.1 |
hwLswFabricChannelIndexThe channel number of fabric. Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.7.1.1 |
hwLswFabricUtilInIngress utilization of fabric.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.7.1.2 |
hwLswFabricUtilOutEgress utilization of fabric.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.7.1.3 |
hwLswFabricPeakInIngress peak of utilization for fabric.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.7.1.4 |
hwLswFabricPeakInTimeIngress peak time of utilization for fabric.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.18.4.7.1.5 |
hwLswFabricPeakOutEgress peak of utilization for fabric.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.18.4.7.1.6 |
hwLswFabricPeakOutTimeEgress peak time of utilization for fabric.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.18.4.7.1.7 |