HUAWEI-WLAN-CONFIGURATION-MIB
AI MIB Summary
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
V1.77, Add nodes of hwAPPortLinkProfileEEESwitch and Broadcast suppression.
Main OID:
hwWlanConfig.1.3.6.1.4.1.2011.6.139.11
1280
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
1280 total| Object Name |
|---|
hwWlanConfigV1.77, Add nodes of hwAPPortLinkProfileEEESwitch and Broadcast suppression. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.139.11 |
hwWlanConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1 |
hwWlanGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.1 |
hwWlanGlobalApUsernameThis object indicates user names for Telnet-based login to APs.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.1.1 |
hwWlanGlobalApPasswordThis object indicates passwords for Telnet-based login to APs.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.1.2 |
hwWlanUsernamePasswordApMacThis object indicates query and setting of MAC addresses of clients logging in to APs.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.1.3 |
hwWlanGlobalApLldpSwitchThis object indicates the status of the global LLDP function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.4 |
hwWlanGlobalIpv6EnableThis object indicates the status of the global IPv6 function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.5 |
hwWlanStationIpv6EnableThis object indicates the status of the IPv6 function of users. The default value is 1 . 1: disable 2: enable.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.6 |
hwWlanApDataCollectionIntervalThis object indicates the period of caching AP performance. The default value is 15. It is expressed in minutes.rw Integer32 (5..60 | 255) .1.3.6.1.4.1.2011.6.139.11.1.1.7 |
hwTestRtCollectOnoffThis object indicates the status of the real-time collection switch.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.1.8 |
hwTestApNormalCollectCycleThis object indicates the regular period of an AC collecting AP performance data.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.1.9 |
hwTestApRtCollectCycleThis object indicates the real-time period of an AC collecting AP performance data.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.1.10 |
hwWlanConfigCommitAllDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.1.11 |
hwWlanProtect OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.1.12 |
hwWlanProtectIpAddressThis object indicates the IP address of the standby AC.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.1.12.1 |
hwWlanProtectIPv6AddressThis object indicates setting of the IPv6 address of the standby AC.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.1.12.2 |
hwWlanProtectPriorityThis object indicates the AC priority that determines whether the AC can be selected as the active AC. The default value is 0.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.1.12.3 |
hwWlanProtectSwitchThis object indicates the status of the hot backup function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.12.4 |
hwWlanProtectRestoreSwitchThis object indicates the status of the switchback function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.12.5 |
hwUndoWlanProtectIpAddressThis object indicates whether to restore the default setting of the IP address of the standby AC.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.1.12.6 |
hwUndoWlanProtectPriorityThis object indicates whether to restore the default setting of the priority of the standby AC.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.1.12.7 |
hwWlanBackupHsbConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.1.13 |
hwWlanCfgHsbServiceTypeThis object indicates the HSB type. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.13.1 |
hwWlanCfgHsbGroupIdThis object indicates the HSB group ID. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.1.13.2 |
hwWlanCfgHsbTunnelIdThis object indicates the ID of the HSB channel. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.1.13.3 |
hwWlanCommitTableDescription. SEQUENCE OF HwWlanCommitEntry .1.3.6.1.4.1.2011.6.139.11.1.1.14 |
hwWlanCommitEntryDescription. HwWlanCommitEntry .1.3.6.1.4.1.2011.6.139.11.1.1.14.1 |
hwWlanCommitApMacDescription. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.1.14.1.1 |
hwWlanConfigCommitDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.1.14.1.2 |
hwWlanReportStaInfoThis object indicates the switch of recording user information in the log. 1:disable 2:enable.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.15 |
hwWlanBLELowPowerWarningThresholdDescription.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.1.16 |
hwWlanBLEMonitorListTableDescription. SEQUENCE OF HwWlanBLEMonitorListEntry .1.3.6.1.4.1.2011.6.139.11.1.1.17 |
hwWlanBLEMonitorListEntryDescription. HwWlanBLEMonitorListEntry .1.3.6.1.4.1.2011.6.139.11.1.1.17.1 |
hwWlanBLEMonitoringListMacDescription. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.1.17.1.1 |
hwWlanBLEMonitoringListRowStatueDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.1.17.1.2 |
hwWlanApPwdPolicyConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.1.18 |
hwApPwdPolicyEnableAp password policy,the default is disablerw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.18.1 |
hwApPwdPolicyExpireSet the days of password expire,the default is 90rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.1.18.2 |
hwApPwdPolicyHistoryRecordNumThe number of password history record,the default is 5rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.1.18.3 |
hwApPwdPolicyAlertBeforeThe days of password before-expire,the default is 30rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.1.18.4 |
hwApPwdPolicyAlertOriginalSet password original-alert,the default is enablerw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.18.5 |
hwApPwdSetTimeGet the password set timero OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.1.18.6 |
hwApPwdIsExpiredQuery password is expired or notro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.18.7 |
hwApPwdIsOrginalQuery password is original or notro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.18.8 |
hwWlanReportStaAssocInfoThis object indicates the switch of recording user online and offline information in the log. 1:disable 2:enable.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.1.19 |
hwWlanGlobalLocationSourceIPAddressThis object indicates the global source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.1.20 |
hwWlanGlobalLocationSourceIPv6AddressThis object indicates the global source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.1.21 |
hwApAuthObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.2 |
hwWlanApAuthModeThis object indicates the AP authentication mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.2.1 |
hwWlanApMacWhitelistTableThis table is used to add and delete AP MAC addresses in the white lists. SEQUENCE OF HwWlanApMacWhitelistEntry .1.3.6.1.4.1.2011.6.139.11.1.2.2 |
hwWlanApMacWhitelistEntryThe index of this table is hwWlanApMacWhitelistMacAddr. HwWlanApMacWhitelistEntry .1.3.6.1.4.1.2011.6.139.11.1.2.2.1 |
hwWlanApMacWhitelistMacAddrThis object indicates the MAC address of an AP. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.2.2.1.1 |
hwWlanApMacWhitelistRowStatusThis object indicates the row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.2.2.1.2 |
hwWlanApSnWhitelistTableThis table is used to add and delete AP sequence numbers in the white lists of AP sequence numbers. SEQUENCE OF HwWlanApSnWhitelistEntry .1.3.6.1.4.1.2011.6.139.11.1.2.3 |
hwWlanApSnWhitelistEntryThe index of this table is hwWlanApSnWhitelistSn. HwWlanApSnWhitelistEntry .1.3.6.1.4.1.2011.6.139.11.1.2.3.1 |
hwWlanApSnWhitelistSnDescription. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.2.3.1.1 |
hwWlanApSnWhitelistRowStatusIndicate the row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.2.3.1.2 |
hwWlanApMacBlacklistTableThis table describes the AP MAC blacklist.This table is used to add an AP's MAC address to the blacklist or delete an AP's MAC address from the blacklist. SEQUENCE OF HwWlanApMacBlacklistEntry .1.3.6.1.4.1.2011.6.139.11.1.2.4 |
hwWlanApMacBlacklistEntryThe index of this table is hwWlanApMacBlacklistMacAddr. HwWlanApMacBlacklistEntry .1.3.6.1.4.1.2011.6.139.11.1.2.4.1 |
hwWlanApMacBlacklistMacAddrThis object indicates the MAC address of an AP. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.2.4.1.1 |
hwWlanApMacBlacklistRowStatusThis object indicates the row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.2.4.1.2 |
hwAPGroupTableThis table is used to create or delete AP groups and bind or unbind the AP system profile, 2G radio profile, and domain profile. SEQUENCE OF HwAPGroupEntry .1.3.6.1.4.1.2011.6.139.11.1.3 |
hwAPGroupEntryThe index of this table is hwAPGroupName. HwAPGroupEntry .1.3.6.1.4.1.2011.6.139.11.1.3.1 |
hwAPGroupNameThis object indicates the AP group name. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.3.1.1 |
hwAPGrpAPSystemProfileThis object indicates the system profile to which AP groups are bound. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.3.1.2 |
hwAPGrpDomainProfileThis object indicates the domain profile to which AP groups are bound. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.3.1.4 |
hwAPGrpRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.3.1.5 |
hwAPGrpWidsProfileThis object indicates the bound WIDS profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.3.1.6 |
hwAPGrpBleProfileThis object indicates the bound BLE profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.3.1.7 |
hwAPGroupWiredPortTableThis table is the AP wired port profile table.This table is used to bind a wired port profile to an AP group or unbind a wired port profile from an AP group. SEQUENCE OF HwAPGroupWiredPortEntry .1.3.6.1.4.1.2011.6.139.11.1.4 |
hwAPGroupWiredPortEntryIndexes of this table are hwAPGroupName, hwAPGrpWPInterfaceType, and hwAPGrpWPInterfaceNum. HwAPGroupWiredPortEntry .1.3.6.1.4.1.2011.6.139.11.1.4.1 |
hwAPGrpWPInterfaceTypeThis object indicates the interface type. It is the index of the table. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.4.1.1 |
hwAPGrpWPInterfaceNumThis object indicates the interface index. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.4.1.2 |
hwAPGrpWPProfileThis object indicates the bound wired port profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.4.1.3 |
hwAPGrpWPRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEAN.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.4.1.4 |
hwAPGroupRadioTableThis table is used to bind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile to an AP group or unbind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile from an AP group.. SEQUENCE OF HwAPGroupRadioEntry .1.3.6.1.4.1.2011.6.139.11.1.5 |
hwAPGroupRadioEntryIndexes of this table are hwAPGroupName and hwAPGrpRadioId. HwAPGroupRadioEntry .1.3.6.1.4.1.2011.6.139.11.1.5.1 |
hwAPGrpRadioIdThis object indicates the radio ID. It is the index of the table. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.5.1.1 |
hwAPGrpRadio5gProfileThis object indicates the bound 5G radio profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.5.1.2 |
hwAPGrpMeshProfileThis object indicates the bound Mesh profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.5.1.3 |
hwAPGrpWdsProfileThis object indicates the bound WDS profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.5.1.4 |
hwAPGrpLocationProfileThis object indicates the bound location profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.5.1.6 |
hwAPGrpRadioRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.5.1.8 |
hwAPGrpRadio2gProfileThis object indicates the 2G radio profile to which AP groups are bound. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.5.1.9 |
hwAPGrpMeshWhitelistProfileThis object indicates the bound whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.5.1.10 |
hwAPGrpWdsWhitelistProfileThis object indicates the bound whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.5.1.11 |
hwAPGrpRadioSwitchThis object indicates the name of a 2G radio profile. It is the index of the table.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.5.1.12 |
hwAPGrpRadioChannelThis object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.5.1.13 |
hwAPGrpRadioBandwidthThis object indicate a bandwidth. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.5.1.14 |
hwAPGrpRadioEirpThis object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.5.1.15 |
hwAPGrpRadioAntennaGainThis object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.rw Unsigned32 (0..30 | 255) .1.3.6.1.4.1.2011.6.139.11.1.5.1.16 |
hwAPGrpRadioCoverageDistanceThis object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.5.1.17 |
hwAPGrpRadioWorkModeThis object indicates the radio working mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.5.1.18 |
hwAPGrpRadioFrequencyThis object indicates the setting of the frequency band for radio 0. The default value is 1. 1: frequency2G, 2: frequency5G.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.5.1.19 |
hwAPGrpSpectrumAnalysisSwitchThis object indicates the status of the spectrum analysis function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.5.1.20 |
hwAPGrpWidsDeviceDetectSwitchThis object indicates the status of the device detection function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.5.1.21 |
hwAPGrpWidsAttackDetectEnBmpThis object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.5.1.22 |
hwAPGrpWidsRogueContainSwitchThis object indicates the status of the device detection function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.5.1.23 |
hwAPGrpRadioSecondChannelThis object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.5.1.24 |
hwAPGroupVapTableThis table is used to create VAPs in an AP group. SEQUENCE OF HwAPGroupVapEntry .1.3.6.1.4.1.2011.6.139.11.1.6 |
hwAPGroupVapEntryIndexes of this table are hwAPGroupName, hwAPGrpRadioId, and hwAPGrpWlanId. HwAPGroupVapEntry .1.3.6.1.4.1.2011.6.139.11.1.6.1 |
hwAPGrpWlanIdThis object indicates the WLAN ID. It is the index of the table. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.6.1.1 |
hwAPGrpVapProfileThis object indicates the bound VAP profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.6.1.2 |
hwAPGrpVapRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.6.1.3 |
hwAPSpecificTableThis table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it. SEQUENCE OF HwAPSpecificEntry .1.3.6.1.4.1.2011.6.139.11.1.7 |
hwAPSpecificEntryThe index of this table is hwAPSpApMac. HwAPSpecificEntry .1.3.6.1.4.1.2011.6.139.11.1.7.1 |
hwAPSpAPSystemProfileThis object indicates the system profile bound to the AP specific profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.2 |
hwAPSpDomainProfileThis object indicates the domain profile bound to the AP specific profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.4 |
hwAPSpRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.7.1.5 |
hwAPSpApMacThis object indicates the MAC address of an AP. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.7.1.6 |
hwAPSpApIdThis object indicates the AP ID.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.7.1.7 |
hwAPSpApTypeInfoThis object indicates the domain profile bound to the AP specific profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.8 |
hwAPSpWidsProfileThis object indicates the bound WIDS profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.9 |
hwAPSpBleProfileThis object indicates the bound BLE profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.10 |
hwAPSpLongitudeThis object indicates the longitude.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.11 |
hwAPSpLatitudeThis object indicates the latitude.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.12 |
hwAPSpApAddressModeThis object indicates the IP address allocation mode.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.7.1.13 |
hwAPSpApIPv4AddressThis object indicates the AP's IPv4 address.
hwAPSpApIPv4Address takes effect if hwAPSpApAddressMode is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.7.1.14 |
hwAPSpApIPv4MaskThis object indicates the AP's IPv4 mask.
hwAPSpApIPv4Mask takes effect if hwAPSpApAddressMode is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.7.1.15 |
hwAPSpApIPv4GatewayThis object indicates the AP's IPv4 gateway.
hwAPSpApIPv4Gateway takes effect if hwAPSpApAddressMode is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.7.1.16 |
hwAPSpApIPv6AddressThis object indicates the AP's IPv6 address.
hwAPSpApIPv6Address takes effect if hwAPSpApAddressMode is set to static.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.17 |
hwAPSpApIPv6PrefixLenThis object indicates the length of the IPv6 address prefix.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.7.1.18 |
hwAPSpApIPv6GatewayThis object indicates the AP's IPv6 gateway.
hwAPSpApIPv6Gateway takes effect if hwAPSpApAddressMode is set to static.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.19 |
hwAPSpIPv4ACListThis object indicates the AC IPv4 address list.
NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.20 |
hwAPSpIPv6ACListThis object indicates the AC IPv6 address list.
NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.21 |
hwAPSpGroupNameDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.22 |
hwAPSpApNameDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.7.1.23 |
hwAPSpecificWiredPortTableThis table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile.. SEQUENCE OF HwAPSpecificWiredPortEntry .1.3.6.1.4.1.2011.6.139.11.1.8 |
hwAPSpecificWiredPortEntryIndexes of this table are hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum and hwAPSpApMac. HwAPSpecificWiredPortEntry .1.3.6.1.4.1.2011.6.139.11.1.8.1 |
hwAPSpWPInterfaceTypeThis object indicates the interface type. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.8.1.1 |
hwAPSpWPInterfaceNumThis object indicates the interface index. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.8.1.2 |
hwAPSpWPProfileThis object indicates the bound wired port profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.8.1.3 |
hwAPSpWPRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.8.1.4 |
hwAPSpWPApIdThis object indicates the AP ID.ro Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.8.1.5 |
hwAPSpecificRadioTableThis table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile. SEQUENCE OF HwAPSpecificRadioEntry .1.3.6.1.4.1.2011.6.139.11.1.9 |
hwAPSpecificRadioEntryIndexes of this table are hwAPSpecificName and hwAPSpRadio. HwAPSpecificRadioEntry .1.3.6.1.4.1.2011.6.139.11.1.9.1 |
hwAPSpRadioThis object indicates the radio ID. It is the index of the table. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.9.1.1 |
hwAPSp5gRadioProfileThis object indicates the bound 5G radio profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.9.1.2 |
hwAPSpMeshProfileThis object indicates the bound Mesh profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.9.1.3 |
hwAPSpWdsProfileThis object indicates the bound WDS profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.9.1.4 |
hwAPSpLocationProfileThis object indicates the bound location profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.9.1.6 |
hwAPSpRadioRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.9.1.8 |
hwAPSpRadio2gProfileThis object indicates the system profile to which AP groups are bound. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.9.1.9 |
hwAPSpMeshWhitelistProfileThis object indicates the bound whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.9.1.10 |
hwAPSpWdsWhitelistProfileThis object indicates the bound whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.9.1.11 |
hwAPSpRadioSwitchThis object indicates the name of a 2G radio profile. It is the index of the table.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.9.1.12 |
hwAPSpRadioChannelThis object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.9.1.13 |
hwAPSpRadioBandwidthThis object indicate a bandwidth. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.9.1.14 |
hwAPSpRadioEirpThis object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.rw Unsigned32 (1..127 | 255) .1.3.6.1.4.1.2011.6.139.11.1.9.1.15 |
hwAPSpRadioAntennaGainThis object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.rw Unsigned32 (0..30 | 255) .1.3.6.1.4.1.2011.6.139.11.1.9.1.16 |
hwAPSpRadioCoverageDistanceThis object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.rw Unsigned32 (1..400 | 65535) .1.3.6.1.4.1.2011.6.139.11.1.9.1.17 |
hwAPSpRadioWorkModeThis object indicates the radio working mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.9.1.18 |
hwAPSpRadioFrequencyThis object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.9.1.19 |
hwAPSpSpectrumAnalysisSwitchThis object indicates the status of the spectrum analysis function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.9.1.20 |
hwAPSpWidsDeviceDetectSwitchThis object indicates the status of the device detection function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.9.1.21 |
hwAPSpWidsAttackDetectEnBmpThis object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.9.1.22 |
hwAPSpWidsRogueContainSwitchThis object indicates the status of the device detection function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.9.1.23 |
hwAPSpRadioApIdThis object indicates the AP ID.ro Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.9.1.24 |
hwAPSpRadioSecondChannelThis object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.9.1.25 |
hwAPSpecificVapTableThis table is used to create VAPs in an AP specific profile. SEQUENCE OF HwAPSpecificVapEntry .1.3.6.1.4.1.2011.6.139.11.1.10 |
hwAPSpecificVapEntryIndexes of this table are hwAPSpWlan, hwAPSpRadio, and hwAPSpApMac. HwAPSpecificVapEntry .1.3.6.1.4.1.2011.6.139.11.1.10.1 |
hwAPSpWlanThis object indicates the WLAN ID. It is the index of the table. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.10.1.1 |
hwAPSpVapProfileThis object indicates the bound VAP profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.10.1.2 |
hwAPSpVapRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.10.1.3 |
hwAPSpVapApIdThis object indicates the AP ID.ro Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.10.1.4 |
hwRegulatoryDomainProfileTableThis table is used to configure country codes, calibration channels, and calibration channel bandwidths. SEQUENCE OF HwRegulatoryDomainProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.11 |
hwRegulatoryDomainProfileEntryThe index of this table is hwRegulatoryDomainProfileName. HwRegulatoryDomainProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.11.1 |
hwRegulatoryDomainProfileNameThis object indicates the name of a regulatory domain profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.11.1.1 |
hwCountryCodeThis object indicates the country code. Its value range is subject to the country code table. The default value is CN.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.11.1.2 |
hwDcaChannel5GBandwidthThis object indicates the calibration bandwidth on the 5 GHz frequency band. The default value is 1 ? 1: bw20 MHz ? 2: bw40 MHz ? 3: bw80 MHz.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.11.1.3 |
hwDcaChannel5GChannelSetThis object indicates the calibration channel set on the 5 GHz frequency band.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.11.1.4 |
hwDcaChannel2GChannelSetThis object indicates the calibration channel set on the 2 GHz frequency band.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.11.1.5 |
hwRegulatoryDomainProfilRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.11.1.6 |
hwWlanWideBandEnableThis object indicates wide band status. The default value is disable.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.11.1.7 |
hwApSystemProfileTableThis table is used to create or delete an AP system profile and configure AP attributes. SEQUENCE OF HwApSystemProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.12 |
hwApSystemProfileEntryThe index of this table is hwApSystemProfName. HwApSystemProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.12.1 |
hwApSystemProfNameThis object indicates the name of an AP system profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.12.1.1 |
hwApProfStatIntervalDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.3 |
hwApProfSampleTimeThis object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.4 |
hwApProfLedSwitchThis object indicates whether to enable the AP's LED indicator. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.5 |
hwApProfMaxStaNumThis object indicates the maximum number of access users on an AP. The default value is 128.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.6 |
hwApProfMtuThis object indicates the MTU of an AP interface. The default value is 1500.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.7 |
hwApProfMeshRoleThis object indicates a Mesh role. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.8 |
hwApProfTemporaryManagementThis object indicates the status of the AP-based offline VAP switch. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.9 |
hwApProfManagementVlanThis object indicates the management VLAN for APs. The default value is 1.rw Unsigned32 (1..4094|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.12.1.10 |
hwApProfHighTempThresholdThis object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with different AP types. For details, see AP device information.rw Unsigned32 (20..110|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.12.1.11 |
hwApProfLowTempThresholdThis object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP.rw Integer32 (-70..10|65535) .1.3.6.1.4.1.2011.6.139.11.1.12.1.12 |
hwApProfOpHRxPowerThresholdThis object indicates the high power threshold of an optical module. The default value is 1000.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.13 |
hwApProfOpLRxPowerThresholdThis object indicates the low power threshold of an optical module. The default value is 50.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.14 |
hwApProfOpHTempThresholdThis object indicates the high temperature threshold of an optical module. The default value is 70.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.15 |
hwApProfOpLTempThresholdThis object indicates the low temperature threshold of an optical module. The default value is -5.rw Integer32 (-40..-5) .1.3.6.1.4.1.2011.6.139.11.1.12.1.16 |
hwApProfMemoryUsageThresholdThis object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.17 |
hwApProfCpuUsageThresholdThis object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.18 |
hwApProfTelnetSwitchThis object indicates whether to enable Telnet. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.19 |
hwApProfSTelnetSwitchThis object indicates whether to enable SSH. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.20 |
hwApProfConsoleSwitchThis object indicates whether to enable the console. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.21 |
hwApProfLogRecordLevelThis object indicates the log backup level. The default value is 7.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.22 |
hwApProfLogServerIpThis object indicates the IP address of the log server.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.12.1.23 |
hwApProfLogServerIpv6This object indicates the IPv6 address of the log server.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.12.1.24 |
hwApProfAlarmRestrictionSwitchThis object indicates the status of the alarm suppression switch. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.25 |
hwApProfAlarmRestrictionPeriodThis object indicates the alarm suppression period. The default value is 60 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.26 |
hwApProfKeepServiceSwitchThis object indicates whether to enable the offline service retaining function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.27 |
hwApProfProtectPriorityThis object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.rw Unsigned32 (0..7|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.12.1.28 |
hwApProfProtectACIpThis object indicates the IP address of the standby AC.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.12.1.29 |
hwApProfProtectACIpv6This object indicates the IPv6 address of the standby AC.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.12.1.30 |
hwApProfEapStartModeThis object indicates the EAP Start packet conversion mode. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.31 |
hwApProfEapStartTransformThis object indicates the EAP Start packet conversion mode. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.32 |
hwApProfEapStartUnicastMacThis object indicates that EAP Start packets are converted to those with specific MAC addresses.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.12.1.33 |
hwApProfEapResponseModeThis object indicates the EAP Response packet conversion mode. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.34 |
hwApProfEapResponseTransformThis object indicates the EAP Response packet conversion mode. The default value is 4.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.35 |
hwApProfEapResponseUnicastMacThis object indicates that EAP Response packets are converted to those with specific MAC addresses.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.12.1.36 |
hwApProfLldpRestartDelayThis object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.37 |
hwApProfLldpAdminStatusThis object indicates the operation mode of LLDP. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.38 |
hwApProfLldpRetransDelayThis object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.39 |
hwApProfLldpRetransHoldMultiplierThis object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.40 |
hwApProfLldpIntervalThis object indicates the interval at which LLDP packets are sent. The default value is 30 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.41 |
hwApProfLldpReportIntervalThis object indicates the interval at which LLDP packets are reported. The default value is 30 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.42 |
hwApProfStaAccessModeThis object indicates the access mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.43 |
hwApProfStaAccessModeProfileThis object indicates blacklist and whitelist profiles.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.12.1.44 |
hwApProfRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.12.1.45 |
hwApProfSFTPSwitchThis object indicates whether to enable the SFTP. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.46 |
hwApProfDynamicBlackListAgingTimeThis object indicates the aging time of the dynamic blacklist entries. The default value is 600.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.47 |
hwApProfAntennaOutputModeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.48 |
hwApProfMppActiveReselectionSwitchThis object indicates of mpp active reselection.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.49 |
hwApProfSpectrumServerIPAddressThis object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.12.1.50 |
hwApProfSpectrumServerIPv6AddressThis object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.12.1.51 |
hwApProfSpectrumServerPortThis object indicates the port of the spectrum analysis server. The default value is 32181.rw Unsigned32 (0 | 5000..65535) .1.3.6.1.4.1.2011.6.139.11.1.12.1.52 |
hwApProfSpectrumViaACSwitchThis object indicates the status of the spectrum analysis function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.53 |
hwApProfSpectrumViaACPortThis object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 6412.rw Unsigned32 (0 | 5000..65535) .1.3.6.1.4.1.2011.6.139.11.1.12.1.54 |
hwApProfSpectrumNonWifiDeviceAgingTimeThis object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.55 |
hwApProfPoeMaxPowerThis object indicates the maximum output power of the AP.The default value is 380000.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.56 |
hwApProfPoePowerReservedThis object indicates the percentage of reserved PoE power to the available PoE power.The default value is 0.rw Unsigned32 (0..100 | 255) .1.3.6.1.4.1.2011.6.139.11.1.12.1.57 |
hwApProfPoePowerThresholdThis object indicates the alarm threshold of PoE power consumption percentage.The default value is 100.rw Unsigned32 (0..100 | 255) .1.3.6.1.4.1.2011.6.139.11.1.12.1.58 |
hwApProfPoeAfInrushSwitchThis object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.59 |
hwApProfPoeHighInrushSwitchThis object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.60 |
hwApProfPrimaryLinkIPv4This object indicates the IP address of the primary AC.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.12.1.61 |
hwApProfPrimaryLinkIPv6This object indicates the IPv6 address of the primary AC.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.12.1.62 |
hwApProfBackupLinkIPv4This object indicates the IP address of the backup AC.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.12.1.63 |
hwApProfBackupLinkIPv6This object indicates the IPv6 address of the backup AC.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.12.1.64 |
hwApProfLedOffTimeRangeThis object indicates whether to make a configured Led off time range effective.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.12.1.65 |
hwApProfUsbSwitchThis object indicates whether to enable the USB. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.66 |
hwApProfBroadcastSuppressionArpEnableThis object indicates whether to enable the arp broadcast suppression.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.67 |
hwApProfBroadcastSuppressionArpThresholdThis object indicates the threshold of arp broadcast suppression. The default value is 256.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.68 |
hwApProfBroadcastSuppressionIgmpEnableThis object indicates whether to enable the igmp broadcast suppression.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.69 |
hwApProfBroadcastSuppressionIgmpThresholdThis object indicates the threshold of igmp broadcast suppression. The default value is 256.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.70 |
hwApProfBroadcastSuppressionNdEnableThis object indicates whether to enable the nd broadcast suppression.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.71 |
hwApProfBroadcastSuppressionNdThresholdThis object indicates the threshold of nd broadcast suppression. The default value is 256.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.72 |
hwApProfBroadcastSuppressionOtherEnableThis object indicates whether to enable the other broadcast suppression.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.73 |
hwApProfBroadcastSuppressionOtherThresholdThis object indicates the threshold of other broadcast suppression. The default value is 256.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.12.1.74 |
hwApProfBroadcastSuppressionAllEnableThis object indicates whether to enable all the broadcast suppression.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.12.1.75 |
hwAPWiredPortProfileTableThis table is used to create or delete an AP wired port link profile and modify or query attributes. SEQUENCE OF HwAPWiredPortProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.13 |
hwAPWiredPortProfileEntryThe index of this table is hwAPWiredPortProfileName. HwAPWiredPortProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.13.1 |
hwAPWiredPortProfileNameThis object indicates the name of an AP wired port link profile. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.13.1.1 |
hwAPWiredPortPortLinkProfileNameThis object indicates the bound AP wired port link profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.13.1.2 |
hwAPWiredPortProfilePortDescThis object indicates the description of an interface.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.13.1.3 |
hwAPWiredPortProfilePortEthTrunkIDThis object indicates the ID of a Trunk. 0 is valid and 0xFFFFFFFF is invalid. The default value is 0xFFFFFFFF.rw Unsigned32 (0 | 255) .1.3.6.1.4.1.2011.6.139.11.1.13.1.4 |
hwAPWiredPortProfilePortSTPSwitchThis object indicates whether to enable STP on wired ports. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.5 |
hwAPWiredPortProfilePortModeThis object indicates the mode of the wired port. For FE ports of plate APs, the default value is 2. For other ports, the default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.6 |
hwAPWiredPortProfilePortVlanPvidThis object indicates the PVID of a port. The default value is 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.13.1.7 |
hwAPWiredPortProfilePortVlanTaggedThis object indicates whether to tag ports with VLAN IDs. The default value is 0.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.13.1.8 |
hwAPWiredPortProfilePortVlanUntaggedThis object indicates whether to untag VLAN IDS from ports. The default value is 1.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.13.1.9 |
hwAPWiredPortProfileUserIsolateThis object indicates the status of the user isolation function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.10 |
hwAPWiredPortProfileDhcpTrustThis object indicates whether a port is configured as a DHCP trusted port. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.11 |
hwAPWiredPortProfileNdTrustThis object indicates whether a port is configured as a ND trusted port. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.12 |
hwAPWiredPortProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.13.1.13 |
hwAPWiredPortProfileLearnAddressThis object indicates whether to enable address learning.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.14 |
hwAPWiredPortProfileIpBindCheckThis object indicates whether to enable IP packet checking against the binding table.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.15 |
hwAPWiredPortProfileArpBindCheckThis object indicates whether to enable ARP packet checking against the binding table.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.16 |
hwAPWiredPortProfileSTPAutoShutdownThis object indicates whether to enable STP-triggered port shutdown.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.17 |
hwAPWiredPortProfileSTPAutoShutdownRecoveryTimeThis object indicates the automatic port recovery time after an STP-triggered shutdown.The default value is 600.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.13.1.18 |
hwAPWiredPortProfileTrafficOptimizeSuppressionBcThis object indicates the rate limit for broadcast storm suppression.The default value is 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.13.1.19 |
hwAPWiredPortProfileTrafficOptimizeSuppressionUcThis object indicates the rate limit for unknown unicast storm suppression.The default value is 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.13.1.20 |
hwAPWiredPortProfileTrafficOptimizeSuppressionMcThis object indicates the rate limit for multicast storm suppression.The default value is 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.13.1.21 |
hwAPWiredPortProfileIGMPSnoopingThis object indicates whether to enable IGMP-snooping.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.13.1.22 |
hwAPWiredPortProfileTrafficFilterTableThis table is used to configure ACL-based packet filtering in an AP wired port profile. SEQUENCE OF HwAPWiredPortProfileTrafficFilterEntry .1.3.6.1.4.1.2011.6.139.11.1.14 |
hwAPWiredPortProfileTrafficFilterEntryIndexes of this table are hwAPWiredPortProfileName. HwAPWiredPortProfileTrafficFilterEntry .1.3.6.1.4.1.2011.6.139.11.1.14.1 |
hwAPWiredPortProfileTrafficFilterDirectionThis object indicates the direction of the ACL-based packet filtering. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.14.1.1 |
hwAPWiredPortProfileTrafficFilterTypeThis object indicates the type of the ACL-based packet filtering. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.14.1.2 |
hwAPWiredPortProfileTrafficFilterAclIDThis object indicates ACL rules for packet filtering.rw Integer32 (3000..3031|4000..4031) .1.3.6.1.4.1.2011.6.139.11.1.14.1.3 |
hwAPWiredPortProfileTrafficFilterRowStatusThis object indicates packet filtering rules configured on the wired interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.14.1.4 |
hwAPPortLinkProfileTableThis table is used to create or delete an AP wired port link profile and configure parameters. SEQUENCE OF HwAPPortLinkProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.15 |
hwAPPortLinkProfileEntryThe index of this table is hwAPPortLinkProfileName. HwAPPortLinkProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.15.1 |
hwAPPortLinkProfileNameThis object indicates the name of an AP wired port link profile. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.15.1.1 |
hwAPPortLinkProfileLldpEnableThis object indicates the status of the LLDP function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.15.1.2 |
hwAPPortLinkProfileLldpTlvTypeThis object indicates the types of TLVs that can be advertised from an AP's wired port. The default value is all(0x11) ? 0: invalid ? bit0: management-address ? bit1: port-description ? bit2: system-capability ? bit3: system-description ? bit4: system-name.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.15.1.3 |
hwAPPortLinkProfileCrcAlarmEnableThis object indicates the status of the CRC error alarm function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.15.1.4 |
hwAPPortLinkProfileCrcAlarmThresholdThis object indicates a CRC error alarm threshold. The default value is 50. It is expressed in percentage.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.15.1.5 |
hwAPPortLinkProfileCrcAlarmResumeThresholdThis object indicates a CRC error alarm clearing threshold. The default value is 20. It is expressed in percentage.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.15.1.6 |
hwAPPortLinkProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE:notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.15.1.7 |
hwAPPortLinkProfilePoeSwitchThis object indicates whether to enable the PoE function on the interface.The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.15.1.8 |
hwAPPortLinkProfilePoePriorityThis object indicates the power priority of PoE interfaces.The default value is 3.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.15.1.9 |
hwAPPortLinkProfilePoeForcePowerSwitchThis object indicates whether to enable forcible PoE power supply on an interface.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.15.1.10 |
hwAPPortLinkProfilePoeLegacySwitchThis object indicates whether to enable the PSE to check compatibility of the connected PDs.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.15.1.11 |
hwAPPortLinkProfilePoeOffTimeRangeThis object indicates whether to make a configured PoE power-off time range effective on interfaces.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.15.1.12 |
hwAPPortLinkProfileAdminStatusThis object indicates whether to enable port shutdown.The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.15.1.13 |
hwAPPortLinkProfileEEESwitchThis object indicates whether to enable the EEE function on the interface.The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.15.1.14 |
hw2gRadioProfileTableThis table is used to configure 2.4 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan and RRM profiles. SEQUENCE OF Hw2gRadioProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.16 |
hw2gRadioProfileEntryThe index of this table is hw2gRadioProfileName. Hw2gRadioProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.16.1 |
hw2gRadioProfileNameThis object indicates the name of a 2G radio profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.16.1.1 |
hw2gRadioBeaconIntervalThis object indicates a Beacon interval. The default value is 100. It is expressed in ms.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.6 |
hw2gRadioGuardIntervalModeThis object indicates the GI mode. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.10 |
hw2gRadioShortPreambleThis object indicates the preamble mode. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.11 |
hw2gRadioFragmentationThresholdThis object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.12 |
hw2gRadioHtAmpduSwitchThis object indicates the status of the aggregation function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.13 |
hw2gRadioHtAmpduMaxLengthExponentThis object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes ? 1: 16383 bytes ? 2: 32767 bytes ? 3: 65535 bytes.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.14 |
hw2gRadioDot11bgBasicRateThis object indicates the basic rate set of the 802.11bg protocol. The default value is 3 ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.15 |
hw2gRadioDot11bgSupportRateThis object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFFF ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s ? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.16 |
hw2gRadioMulticastRateThis object indicates the multicast rate. The default value is 0x2F ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.17 |
hw2gRadioWmmMandatorySwitchThis object indicates the status of the mandatory WMM matching function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.18 |
hw2gRadioApEDCAVoiceECWmaxThis object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.19 |
hw2gRadioApEDCAVoiceECWminThis object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.20 |
hw2gRadioApEDCAVoiceAIFSNThis object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.21 |
hw2gRadioApEDCAVoiceTXOPLimitThis object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.22 |
hw2gRadioApEDCAVoiceAckPolicyThis object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.23 |
hw2gRadioApEDCAVideoECWmaxThis object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.24 |
hw2gRadioApEDCAVideoECWminThis object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.25 |
hw2gRadioApEDCAVideoAIFSNThis object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.26 |
hw2gRadioApEDCAVideoTXOPLimitThis object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.27 |
hw2gRadioApEDCAVideoAckPolicyThis object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.28 |
hw2gRadioApEDCABEECWmaxThis object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.29 |
hw2gRadioApEDCABEECWminThis object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.30 |
hw2gRadioApEDCABEAIFSNThis object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.31 |
hw2gRadioApEDCABETXOPLimitThis object indicates the EDCA parameter TXOPLimit for BE services on APs. It indicates the transmission opportunity limit. The default value is 0. The unit is 32 us.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.32 |
hw2gRadioApEDCABEAckPolicyThis object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.33 |
hw2gRadioApEDCABKECWmaxThis object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.34 |
hw2gRadioApEDCABKECWminThis object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.35 |
hw2gRadioApEDCABKAIFSNThis object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.36 |
hw2gRadioApEDCABKTXOPLimitThis object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.37 |
hw2gRadioApEDCABKAckPolicyThis object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.38 |
hw2gRadioWmmSwitchThis object indicates the status of the WMM function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.39 |
hw2gRadioRtsCtsThresholdThis object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 2347. It is expressed in bytes.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.40 |
hw2gRadioRtsCtsModeThis object indicates the RTS-CTS mode set for the specified radio profile. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.41 |
hw2gRadioPowerAutoAdjustSwitchThis object indicates the status of the user-by-user power control function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.42 |
hw2gRadioBeamformingSwitchThis object indicates the status of the beamforming function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.43 |
hw2gRadioWifiLightThis object indicates information reflected by the blinking frequency of the Wireless LED on an AP.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.44 |
hw2gRadioChannelSwitchAnnouncementSwitchThis object indicates the status of the channel switchover announcement function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.45 |
hw2gRadioChannelSwitchModeThis object indicates the channel switch announcement mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.46 |
hw2gRadioAutoOffServiceSwitchThis object indicates the status of the scheduled radio disabling function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.47 |
hw2gRadioAutoOffServiceStartTimeThis object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.16.1.48 |
hw2gRadioAutoOffServiceEndTimeThis object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.16.1.49 |
hw2gRadioInterferenceDetectSwitchThis object indicates the status of the user-by-user power control function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.50 |
hw2gRadioInterferenceIntraFrequencyThresholdThis object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.51 |
hw2gRadioInterferenceAdjacentFrequencyThresholdThis object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.52 |
hw2gRadioInterferenceStationThresholdThis object indicates the alarm threshold for station interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC.The default value is 32.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.53 |
hw2gRadioRrmProfileThis object indicates the bound RRM profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.16.1.54 |
hw2gRadioAirScanProfileThis object indicates the bound air scan profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.16.1.55 |
hw2gRadioProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.16.1.56 |
hw2gRadioProfileUtmostPowerSwitchThis object indicates the switch for the function of sending packets at maximum power.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.57 |
hw2gRadioProfileRadioTypeThis object indicates the type of radio. The default value is 9.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.59 |
hw2gRadioProfileSmartAntennaEnableDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.16.1.60 |
hw2gRadioProfileTxChainNumDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.61 |
hw2gRadioProfileRxChainNumDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.16.1.62 |
hw2gRadioProfileAutoOffTimeRangeThis object indicates the time range for disabling the radio.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.16.1.63 |
hw5gRadioProfileTableThis table is used to configure 5 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan profiles and RRM profiles. SEQUENCE OF Hw5gRadioProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.17 |
hw5gRadioProfileEntryThe index of this table is hw5gRadioProfileName. Hw5gRadioProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.17.1 |
hw5gRadioProfileNameThis object indicates the name of a 5G radio profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.17.1.1 |
hw5gRadioBeaconIntervalThis object indicates a Beacon interval. The default value is 100. It is expressed in ms.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.6 |
hw5gRadioGuardIntervalModeThis object indicates the GI mode. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.10 |
hw5gRadioShortPreambleThis object indicates whether the short preamble is enabled. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.11 |
hw5gRadioFragmentationThresholdThis object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.12 |
hw5gRadioHtAmpduSwitchThis object indicates the status of the aggregation function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.13 |
hw5gRadioHtAmpduMaxLengthExponentThis object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes ? 3: 65535 bytes.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.14 |
hw5gRadioVhtAmpduMaxLengthExponentThis object indicates the maximum length of frames converged by an MPDU. The default value is 7 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes? 3: 65535 bytes? 4: 131071 bytes? 5: 262143 bytes? 6: 524287 bytes? 7: 1048575 bytes.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.15 |
hw5gRadioVhtAmsduSwitchThis object indicates the status of the A-MSDU aggregation function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.16 |
hw5gRadioVhtAmsduMaxFrameNumThis object indicates the maximum number of sub-frames that can be aggregated into an A-MSDU. The default value is 2.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.17 |
hw5gRadioDot11aBasicRateThis object indicates the basic rate set of the 802.11bg protocol. The default value is 0x148 (6 Mbit/s/12 Mbit/s/24 Mbit/s) ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.18 |
hw5gRadioDot11aSupportRateThis object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFD8 (6 Mbit/s/9 Mbit/s/12 Mbit/s/18 Mbit/s/24 Mbit/s/36 Mbit/s/48 Mbit/s/54 Mbit/s).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.19 |
hw5gRadioMulticastRateThis object indicates the multicast rate. The default value is 0x8(6M).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.20 |
hw5gRadioVhtNssMapMaxMcsThis object indicates the maximum MCS value for 802.11ac radios. The number of spatial flows is 4 and the maximum MCS value is 7-9. The format is x?x?x?x. The default value is 9?9?9?9.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.17.1.21 |
hw5gRadioWmmMandatorySwitchThis object indicates the status of the mandatory WMM matching function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.22 |
hw5gRadioApEDCAVoiceECWmaxThis object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.23 |
hw5gRadioApEDCAVoiceECWminThis object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.24 |
hw5gRadioApEDCAVoiceAIFSNThis object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.25 |
hw5gRadioApEDCAVoiceTXOPLimitThis object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.26 |
hw5gRadioApEDCAVoiceAckPolicyThis object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.27 |
hw5gRadioApEDCAVideoECWmaxThis object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.28 |
hw5gRadioApEDCAVideoECWminThis object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.29 |
hw5gRadioApEDCAVideoAIFSNThis object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.30 |
hw5gRadioApEDCAVideoTXOPLimitThis object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.31 |
hw5gRadioApEDCAVideoAckPolicyThis object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.32 |
hw5gRadioApEDCABEECWmaxThis object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.33 |
hw5gRadioApEDCABEECWminThis object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.34 |
hw5gRadioApEDCABEAIFSNThis object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.35 |
hw5gRadioApEDCABETXOPLimitThis object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BE services on APs. The default value is 0. The unit is 32 us.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.36 |
hw5gRadioApEDCABEAckPolicyThis object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.37 |
hw5gRadioApEDCABKECWmaxThis object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.38 |
hw5gRadioApEDCABKECWminThis object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.39 |
hw5gRadioApEDCABKAIFSNThis object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7..rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.40 |
hw5gRadioApEDCABKTXOPLimitThis object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.41 |
hw5gRadioApEDCABKAckPolicyThis object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.42 |
hw5gRadioWmmSwitchThis object indicates the status of the WMM function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.43 |
hw5gRadioRtsCtsThresholdThis object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 2347 bytes.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.44 |
hw5gRadioRtsCtsModeThis object indicates the RTS-CTS mode set for the specified radio profile. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.45 |
hw5gRadioPowerAutoAdjustSwitchThis object indicates the status of the user-by-user power control function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.46 |
hw5gRadioBeamformingSwitchThis object indicates the status of the beamforming function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.47 |
hw5gRadioWifiLightThis object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1 NOTE ? If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.? If WDS is enabled on an AP, the the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.? For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.? For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.? For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.? If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.48 |
hw5gRadioChannelSwitchAnnouncementSwitchThis object indicates the status of the channel switchover announcement function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.49 |
hw5gRadioChannelSwitchModeThis object indicates the channel switch announcement mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.50 |
hw5gRadioAutoOffServiceSwitchThis object indicates the status of the scheduled radio disabling function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.51 |
hw5gRadioAutoOffServiceStartTimeThis object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59..rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.17.1.52 |
hw5gRadioAutoOffServiceEndTimeThis object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss. NOTE? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.17.1.53 |
hw5gRadioInterferenceDetectSwitchThis object indicates the status of the user-by-user power control function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.54 |
hw5gRadioInterferenceIntraFrequencyThresholdThis object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.55 |
hw5gRadioInterferenceAdjacentFrequencyThresholdThis object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.56 |
hw5gRadioInterferenceStationThresholdThis object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC. The default value is 32.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.57 |
hw5gRadioRrmProfileThis object indicates the bound RRM profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.17.1.58 |
hw5gRadioAirScanProfileThis object indicates the bound air scan profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.17.1.59 |
hw5gRadioProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.17.1.60 |
hw5gRadioProfileUtmostPowerSwitchThis object indicates the switch for the function of sending packets at maximum power.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.61 |
hw5gRadioProfileRadioTypeThis object indicates the type of radio. The default value is 14.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.63 |
hw5gRadioProfileSmartAntennaEnableDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.64 |
hw5gRadioProfileMuMIMOEnableDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.17.1.65 |
hw5gRadioProfileTxChainNumDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.66 |
hw5gRadioProfileRxChainNumDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.17.1.67 |
hw5gRadioProfileAutoOffTimeRangeThis object indicates the time range for disabling the radio.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.17.1.68 |
hwRrmProfileTableThis table is used to configure radio resource management parameters, including parameters related to band steering, dynamic load balancing, smart roaming, and UAC. SEQUENCE OF HwRrmProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.18 |
hwRrmProfileEntryThe index of this table is hwRrmProfileName. HwRrmProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.18.1 |
hwRrmProfileNameThis object indicates the name of the RRM profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.18.1.1 |
hwRrmAutoChannelSelectSwitchThis object indicates the status of the automatic channel selection function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.2 |
hwRrmAutoTxPowerSelectSwitchThis object indicates the status of the automatic power selection function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.3 |
hwRrmErrRateThresholdThis object indicate the error packet threshold triggering the automatic channel or power selection function. The default value is 50. It is expressed in percentage.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.4 |
hwRrmAirtimeFairSchduleSwitchThis object indicates the status of the airtime scheduling function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.5 |
hwRrmDynamicEdcaSwitchThis object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.6 |
hwRrmUacLimitClientSnrSwitchThis object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.7 |
hwRrmUacClientSnrThresholdThis object indicates the SNR threshold for rejecting access from terminals. The default value is 15. It is expressed in dB.rw Unsigned32 (5..75|255) .1.3.6.1.4.1.2011.6.139.11.1.18.1.8 |
hwRrmUacPolicySwitchThis object indicates the status of the UAC policy function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.9 |
hwRrmUacPolicyTypeThis object indicates the UAC policy. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.10 |
hwRrmUacClientNumAccessThresholdDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.11 |
hwRrmUacClientNumRoamThresholdDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.12 |
hwRrmUacReachThresholdHideSsidSwitchThis object indicates the status of the function of hiding the SSID when the value of UAC reaches the specified threshold. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.13 |
hwRrmBandSteerDenyThresholdThis object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 2.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.14 |
hwRrmBandSteerLbClientThresholdThis object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 10..rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.15 |
hwRrmBandSteerLbGapThresholdDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.16 |
hwRrmBandSteerClientBandsExpireThis object indicates the load difference percentage for triggering inter-band load balancing. The default value is 20.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.17 |
hwRrmLoadBalanceSwitchThis object indicates the status of the load balancing group function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.18 |
hwRrmLoadBalanceClientThresholdThis object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.19 |
hwRrmLoadBalanceGapThresholdThis object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 10.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.20 |
hwRrmLoadBalanceDenyThresholdThis object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.21 |
hwRrmSmartRoamCheckTypeThis object indicates whether STA active roaming is triggered by rate check or SNR check.The values are as follows:? 1: checkSnr? 2: checkRate? 3: checkAll.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.22 |
hwRrmSmartRoamSwitchThis object indicates the status of the smart roaming function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.18.1.23 |
hwRrmSmartRoamSnrThresholdThis object indicates the SNR threshold for triggering the smart roaming function. The default value is 20 dB.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.24 |
hwRrmSmartRoamRateThresholdThis object indicates the rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The default value is 0. It is expressed in percentage.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.25 |
hwRrmSmartRoamSnrHighLevelMarginThis object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15. It is expressed in dB.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.26 |
hwRrmSmartRoamSnrLowLevelMarginThis object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 6. It is expressed in dB.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.27 |
hwRrmSmartRoamSnrCheckIntervalThis object indicates the terminal SNR detection interval for smart roaming. The default value is 3. It is expressed in s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.28 |
hwRrmSmartRoamUnableRoamExpireTimeThis object indicates the aging time of records that terminals are unable to roam. The default value is 240. It is expressed in minutes.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.29 |
hwRrmProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.18.1.30 |
hwRrmUacChannelUtiAccessThresholdDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.31 |
hwRrmUacChannelUtiRoamThresholdDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.32 |
hwRrmSmartRoamQuickKickoffRateThrSmart roam quick-kickoff rate thresholdrw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.33 |
hwRrmSmartRoamQuickKickoffSnrThrSmart roam quick-kickoff SNR thresholdrw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.18.1.34 |
hwAirScanProfileTableThis table is used to configure air scan intervals, duration, and scan channel sets. SEQUENCE OF HwAirScanProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.19 |
hwAirScanProfileEntryThe index of this table is hwAirScanProfileName. HwAirScanProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.19.1 |
hwAirScanProfileNameThis object indicates the name of an air scan profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.19.1.1 |
hwAirScanPeriodThis object indicates the air scan period. The default value is 60. It is expressed in ms.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.19.1.2 |
hwAirScanIntervalThis object indicates the scan interval. The default value is 600. The unit is 0.1s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.19.1.3 |
hwAirScanChannelSetThis object indicates the scan channel set. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.19.1.4 |
hwAirScanProfilRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.19.1.5 |
hwAirScanVoiceAwareThis object indicates the voice aware set. The default value is enable.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.19.1.6 |
hwAirScanVideoAwareThis object indicates the video aware set. The default value is enable.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.19.1.7 |
hwAirScanSwitchThis object indicates the scan switch status. The default value is enable.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.19.1.8 |
hwVapProfileTableThis table is used to configure and query VAP profile parameters. SEQUENCE OF HwVapProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.20 |
hwVapProfileEntryThe index of this table is hwVapProfileName. HwVapProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.20.1 |
hwVapProfileNameThis object indicates the name of a VAP profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.1 |
hwVapForwardModeThis object indicates the service forwarding mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.2 |
hwVapTunnelForwardProtocolThis object indicates the format of packets forwarded by tunnel. The default value is 0xF.? bit0: dot1x? bit1: http? bit2: wapi? bit3: mdns.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.20.1.3 |
hwVapServiceSwitchThis object indicates the status of the VAP service function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.4 |
hwVapAutoOffStartTimeThis object indicates the start time of VAP profile. The format is HH:MM:SS.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.5 |
hwVapAutoOffEndTimeThis object indicates the end time of VAP profile. The format is HH:MM:SS.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.6 |
hwVapTemporaryManagementSwitchIf this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personnel can access it to identify faults (the security mode is the non-authentication security mode and the SSID will be hidden). The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.7 |
hwVapServiceVlanThis object indicates the service VLAN for the VAP. The default value is 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.20.1.8 |
hwVapVlanPoolThis object indicates the VLAN pool to which the VAP is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.9 |
hwVapTypeThis object indicates the VAP type. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.10 |
hwVapStaAccessModeThis object indicates the access mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.11 |
hwVapStaAccessModePorfileThis object indicates blacklist and whitelist profiles.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.12 |
hwVapRoamHomeAgentThis object indicates the tunnel endpoint for inter-Layer 3 roaming. The default value is 1..rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.13 |
hwVapRoamVlanMobilityGroupThis object indicates the VLAN group for roaming. For the same VLAN, if the VAP is in different VLAN groups for roaming, the roaming is also inter-Layer 3 roaming. The default value is 1..rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.20.1.14 |
hwVapRoamLayer3SwitchThis object indicates the status of the Layer 3 roaming function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.15 |
hwVapBandSteerSwitchThis object indicates the status of the band steering function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.16 |
hwVapLearnIpv4AddressThis object indicates the status of the IPv4 address learning function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.17 |
hwVapLearnIpv6AddressThis object indicates the status of the IPv6 address learning function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.18 |
hwVapLearnIpv4AddressStrictThis object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.19 |
hwVapIpBindCheckThis object indicates the status of the IP binding relationship check function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.20 |
hwVapArpBindCheckThis object indicates the status of the ARP binding relationship check function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.21 |
hwVapOptinon82InsertSwitchThis object indicates the status of the function of appending the Option 82 field to DHCP messages. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.22 |
hwVapOptinon82InsertRidFormatThis object indicates the mode to append the Option 82 field to DHCP messages. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.23 |
hwVapDhcpTrustPortThis object indicates the status of the radio interface DHCP trust function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.24 |
hwVapNdTrustPortThis object indicates the status of the radio interface ND trust function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.25 |
hwVapSecurityProfileThe object indicates the security profile that is bound to the VAP. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.26 |
hwVapTrafficProfileThe object indicates the traffic profile that is bound to the VAP. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.27 |
hwVapSsidProfileThe object indicates the SSID profile that is bound to the VAP. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.28 |
hwVapAuthenticationProfileThe object indicates the authentication profile that is bound to the VAP. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.29 |
hwVapSacProfileThe object indicates the SAC profile that is bound to the VAP.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.30 |
hwVapProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.20.1.31 |
hwVapUserProfileThe object indicates the user profile that is bound to the VAP.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.32 |
hwVapHotspot2ProfileThe object indicates the Hotspot2.0 profile that is bound to the VAP.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.33 |
hwSoftgreProfileThe object indicates the Softgre profile that is bound to the VAP.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.34 |
hwVapOptinon82RidUserDefinedDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.35 |
hwVapOptinon82RidMacFormatDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.36 |
hwVapOptinon82InsertCidFormatDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.37 |
hwVapOptinon82CidUserDefinedDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.38 |
hwVapOptinon82CidMacFormatDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.39 |
hwVapUccProfileThe object indicates the UCC profile that is bound to the VAP.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.40 |
hwVapAntiAttackBroadcastFloodSwitchThis object indicates the status of the VAP anti-attack braoadcast flood function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.41 |
hwVapAntiAttackBroadcastFloodStaRateThresholdThis object indicates the anti-attack braoadcast flood sta-rate-threshold for the VAP. The default value is 10.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.20.1.42 |
hwVapAntiAttackBroadcastFloodBlacklistSwitchThis object indicates the status of the VAP anti-attack braoadcast flood blacklist function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.43 |
hwVapLearnIpv6AddressStrictThis object indicates the status of the strict address learning (only through the DHCPv6) function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.44 |
hwVapAntiAttackARPFloodSwitchThis object indicates the status of the VAP anti-attack ARP flood function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.45 |
hwVapAntiAttackARPFloodStaRateThresholdThis object indicates the anti-attack ARP flood sta-rate-threshold for the VAP. The default value is 5.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.20.1.46 |
hwVapAntiAttackARPFloodBlacklistSwitchThis object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.47 |
hwVapAntiAttackNDFloodSwitchThis object indicates the status of the VAP anti-attack ND flood function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.48 |
hwVapAntiAttackNDFloodStaRateThresholdThis object indicates the anti-attack ND flood sta-rate-threshold for the VAP. The default value is 16.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.20.1.49 |
hwVapAntiAttackNDFloodBlacklistSwitchThis object indicates the status of the VAP anti-attack ND flood blacklist function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.50 |
hwVapAntiAttackIGMPFloodSwitchThis object indicates the status of the VAP anti-attack IGMP flood function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.51 |
hwVapAntiAttackIGMPFloodStaRateThresholdThis object indicates the anti-attack IGMP flood sta-rate-threshold for the VAP. The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.20.1.52 |
hwVapAntiAttackIGMPFloodBlacklistSwitchThis object indicates the status of the VAP anti-attack IGMP flood blacklist function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.20.1.53 |
hwVapDefenceProfileThe object indicates the Defence profile that is bound to the VAP.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.54 |
hwVapTimeRangeThe object indicates the TimeRange .rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.55 |
hwVapPermitVlanListThis object indicates the PermitVlanList. The default value is 0.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.20.1.56 |
hwSsidProfileTableThis table is used to configure and query SSID profile parameters. SEQUENCE OF HwSsidProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.21 |
hwSsidProfileEntryThe index of this table is hwSsidProfileName. HwSsidProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.21.1 |
hwSsidProfileNameThis object indicates the name of a VAP profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.21.1.1 |
hwSsidTextThis object indicates the SSID character string. The default value is huawei-default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.21.1.2 |
hwSsidHideThis object indicates whether to enable SSID hiding. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.3 |
hwSsidAssocTimeoutThis object indicates the association timeout period of a user. The default value is 5 minutes.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.4 |
hwSsidMaxStaNumThe object indicates the number of access users on a VAP. The default value is 64.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.5 |
hwSsidLegacyStaSwitchThis object indicates whether to allow access from legacy terminals. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.6 |
hwSsidDtimIntervalThis object indicates the DTIM interval. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.7 |
hwSsidClientEdcaVoiceECWmaxThis object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VO queue on the station. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.8 |
hwSsidClientEdcaVoiceECWminThis object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VO queue on the station. The default value is 2.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.9 |
hwSsidClientEdcaVoiceAIFSNThis object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VO queue on the station. The default value is 2.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.10 |
hwSsidClientEdcaVoiceTXOPLimitThis object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VO queue on the station. The default value is 47.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.11 |
hwSsidClientEdcaVideoECWmaxThis object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VI queue on the station. The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.12 |
hwSsidClientEdcaVideoECWminThis object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VI queue on the station. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.13 |
hwSsidClientEdcaVideoAIFSNThis object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VI queue on the station. The default value is 2.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.14 |
hwSsidClientEdcaVideoTXOPLimitThis object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VI queue on the station. The default value is 94.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.15 |
hwSsidClientEdcaBeECWmaxThis object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BE queue on the station. The default value is 10.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.16 |
hwSsidClientEdcaBeECWminThis object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BE queue on the station. The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.17 |
hwSsidClientEdcaBeAIFSNThis object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BE queue on the station. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.18 |
hwSsidClientEdcaBeTXOPLimitThis object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BE queue on the station. The default value is 0.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.19 |
hwSsidClientEdcaBkECWmaxThis object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BK queue on the station. The default value is 10.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.20 |
hwSsidClientEdcaBkECWminThis object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BK queue on the station. The default value is 4.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.21 |
hwSsidClientEdcaBkAIFSNThis object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BK queue on the station. The default value is 7.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.22 |
hwSsidClientEdcaBkTXOPLimitThis object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BK queue on the station. The default value is 0.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.23 |
hwSsidInboundCarCirThis object indicates the inbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.24 |
hwSsidInboundCarPirThis object indicates the inbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.25 |
hwSsidInboundCarCbsThis object indicates the inbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.26 |
hwSsidInboundCarPbsThis object indicates the inbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.27 |
hwSsidOutboundCarCirThis object indicates the outbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.28 |
hwSsidOutboundCarPirThis object indicates the outbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.29 |
hwSsidOutboundCarCbsThis object indicates the outbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.30 |
hwSsidOutboundCarPbsThis object indicates the outbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.31 |
hwSsidProfileRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.21.1.32 |
hwSsidHideWhileReachMaxStaDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.33 |
hwSsidBeacon2gRateDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.34 |
hwSsidBeacon5gRateDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.35 |
hwSsidDenyBroadcastProbeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.36 |
hwSsidProbeResponseRetryDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.37 |
hwSsidUapsdDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.38 |
hwSsidActiveDullClientDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.39 |
hwSsidMuMIMOSwitchDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.40 |
hwSsidProfile80211rEnableThis object indicates the switch of 802.11r.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.41 |
hwSsidProfile80211rModeThis object indicates the mode of 802.11r.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.21.1.42 |
hwSsidProfile80211rReassociateTimeoutThis object indicates the reassociate timeout of 802.11r.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.21.1.43 |
hwSecurityProfileTableThis table is used to describe the information of a security profile. SEQUENCE OF HwSecurityProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.22 |
hwSecurityProfileEntryThe index of this table is hwSecurityProfileName. HwSecurityProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.22.1 |
hwSecurityProfileNameThis object indicates the name of a security profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.1 |
hwSecurityPolicyThis object indicates the air interface authentication policy. The default value is 8(open).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.22.1.2 |
hwSecurityWepEncryptThis object indicates the WEP encryption algorithm. The default value is 4369.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.3 |
hwSecurityWepPskModeThis object indicates that the WEP PSK mode is PassPhase or Hex. The default value is 4369.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.4 |
hwSecurityWepPsk1This object indicates the WEP PSK1.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.5 |
hwSecurityWepPsk2This object indicates the WEP PSK2.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.6 |
hwSecurityWepPsk3This object indicates the WEP PSK3.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.7 |
hwSecurityWepPsk4This object indicates the WEP PSK4.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.8 |
hwSecurityWepDefaultKeyIdThis object indicates the default key ID for WEP. The default value is 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.9 |
hwSecurityWpaEncryptThis object indicates the WPA/WPA2 encryption algorithm.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.22.1.10 |
hwSecurityWpaPskModeThis object indicates whether the WPA PSK mode is PassPhase or Hex.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.22.1.11 |
hwSecurityWpaPskThis object indicates the WPA/WPA2 PSK.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.12 |
hwSecurityWpaPtkUpdateSwitchThis object indicates the status of WPA PTK update function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.22.1.13 |
hwSecurityWpaPtkUpdateIntervalThis object indicates the WPA PTK update interval. The default value is 43200 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.14 |
hwSecurityWapiPskModeThis object indicates the WAPI PSK mode. The default value is 1. 1:pskPassphase 2:pskHex.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.22.1.15 |
hwSecurityWapiPskThis object indicates the WAPI PSK.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.16 |
hwSecurityWapiAsuIpAddressThis object indicates the IP address of the WAPI ASU.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.22.1.17 |
hwSecurityWapiIssuerCertFileNameThis object indicates the certificate file name of the WAPI issuer.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.18 |
hwSecurityWapiAsuCertFileNameThis object indicate the certificate file name of the WAPI ASU.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.19 |
hwSecurityWapiAcCertFileNameThis object indicate the certificate file name of the WAPI AC.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.20 |
hwSecurityWapiAcPrvKeyFileNameThis object indicates the private key file name of the WAPI AC.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.21 |
hwSecurityWapiIssuerPfxPasswordThis object indicates the WAPI issuer certificate key.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.22 |
hwSecurityWapiAsuPfxPasswordThis object indicates the WAPI ASU certificate key.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.23 |
hwSecurityWapiAcPfxPasswordThis object indicates the WAPI AC certificate key.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.24 |
hwSecurityWapiAcPrvKeyPasswordThis object indicates the key for reading the AC private key file.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.22.1.25 |
hwSecurityWapiCertRetransCountThis object indicates the number of retransmissions of WAPI certificate authentication packets. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.26 |
hwSecurityWapiBkThresholdThis object indicates the WAPI BK lifetime percentage. The default value is 70.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.27 |
hwSecurityWapiBkLifetimeThis object indicates the interval for updating the WAPI BK. The default value is 43200 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.28 |
hwSecurityWapiUskUpdateMethodThis object indicates the WAPI USK update mode. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.22.1.29 |
hwSecurityWapiMskUpdateMethodThis object indicates the WAPI MSK update mode. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.22.1.30 |
hwSecurityWapiUskUpdateIntervalThis object indicates the time-based interval for updating the WAPI USK. The default value is 86400 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.31 |
hwSecurityWapiUskUpdatePacketsThis object indicates the number of packets that will trigger WAPI USK update. The default value is 10.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.32 |
hwSecurityWapiUskRetansCountThis object indicates the maximum number of retransmissions of a WAPI USK negotiation packet. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.33 |
hwSecurityWapiMskUpdateIntervalThis object indicates the time-based interval for updating the WAPI MSK. The default value is 86400 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.34 |
hwSecurityWapiMskUpdatePacketsThis object indicates the number of packets that will trigger WAPI MSK update. The default value is 10.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.35 |
hwSecurityWapiMskRetansCountThis object indicates the maximum number of retransmissions of a WAPI MSK negotiation packet. The default value is 3.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.36 |
hwSecurityWapiSATimeoutThis object indicates the timeout period of a WAPI-based security association (SA). The default value is 60 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.37 |
hwSecurityPMFThis object indicates the status of the PMF function. The default value is 1.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.22.1.38 |
hwSecurityProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.22.1.39 |
hwAPTrafficProfileTableThis table is used to configure and query traffic profile parameters. SEQUENCE OF HwAPTrafficProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.23 |
hwAPTrafficProfileEntryThe index of this table is hwAPTrafficProfileName. HwAPTrafficProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.23.1 |
hwAPTrafficProfileNameThis object indicates the name of a traffic profile. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.23.1.1 |
hwAPTrafficProfilePriorityMapDnTrustModeThis object indicates the downstream service priority mapping mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.2 |
hwAPTrafficProfilePriorityDscpDnMap80211eThis object indicates the mapping relationship between 802.1p priorities of 802.3 packets and user priorities of 802.11 packets when data packets are sent to a downstream AP. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mapped data are separated by a comma.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.23.1.3 |
hwAPTrafficProfilePriority80211eUpMapDscpThis object indicates the tunnel priority mappings when data packets are sent from APs to an AC. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mapped data are separated by a comma.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.23.1.4 |
hwAPTrafficProfileUserIsolateThis object indicates the user isolation mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.5 |
hwAPTrafficProfileRateLimitClientUpThis object indicates the STA's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.23.1.6 |
hwAPTrafficProfileRateLimitClientDnThis object indicates the STA's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.23.1.7 |
hwAPTrafficProfileRateLimitVapUpThis object indicates the VAP's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.23.1.8 |
hwAPTrafficProfileRateLimitVapDnThis object indicates the VAP's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.23.1.9 |
hwAPTrafficProfileMldSnoopingThis object indicates the status of the MLD snooping function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.10 |
hwAPTrafficProfileIGMPSnoopingThis object indicates the status of the IGMP snooping function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.11 |
hwAPTrafficProfileIGMPSnoopingReportSuppressThis object indicates the status of the IGMP snooping report suppression function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.12 |
hwAPTrafficProfileMcToUcThis object indicates the status of the function of converting multicast to unicast. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.13 |
hwAPTrafficProfileOptimizeSuppressionBcThis object indicates the information about broadcast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.rw Unsigned32 (0..14881000|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.23.1.14 |
hwAPTrafficProfileOptimizeSuppressionUcThis object indicates the information about unknown unicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.rw Unsigned32 (0..14881000|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.23.1.15 |
hwAPTrafficProfileOptimizeSuppressionMcThis object indicates the information about multicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.rw Unsigned32 (0..14881000|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.23.1.16 |
hwAPTrafficProfileOptimizeTCPAdjustMSSThis object indicates the information about the automatic MSS adjustment. The default value is 0xFFFFFFFF, indicating that this function is not enabled.rw Unsigned32 (128..2048|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.23.1.17 |
hwAPTrafficProfileOptimizeProxyARPThis object indicates the status of the ARP proxy function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.18 |
hwAPTrafficProfileOptimizeProxyNDThis object indicates the status of the ND proxy function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.19 |
hwAPTrafficProfileOptimizeUcSendARPThis object indicates the status of the unicast ARP function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.20 |
hwAPTrafficProfileOptimizeUcSendNDThis object indicates the status of the unicast ND function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.21 |
hwAPTrafficProfileOptimizeUcSendDHCPThis object indicates the status of the unicast DHCP function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.22 |
hwAPTrafficProfileOptimizeBcMcDenyAllAfter this function is enabled, other multicast packets, except for proxy response packets and multicast packets converted to unicast packets, are discarded. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.23 |
hwAPTrafficProfileOptimizeStaBridgeForwardThis object indicates the status of the STA bridge forwarding function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.24 |
hwAPTrafficProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.23.1.25 |
hwAPTrafficProfilePriorityMapUpTrustModeThis object indicates the tunnel priority mapping mode.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.26 |
hwAPTrafficProfilePriorityDscpUpMapDscpThis object indicates the mapping relationship between DSCP and DSCP. DSCP values range from 0 to 63. Two mapped data are separated by a comma.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.23.1.27 |
hwAPTrafficProfileOptimizeBcMcMismatchActThis object indicates the status of the bcmc unicast send mismacth action function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.28 |
hwAPTrafficProfileMcToUcDynamicAdatptiveThis object indicates the status of the multicast to unicast dynamic adaptive function. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.23.1.29 |
hwAPTrafficProfileIGMPSnoopingMaxBandwidthThis object indicates the status of the IGMP snooping max bandwidth function. The invalid value is 0.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.23.1.30 |
hwAPTrafficProfileIGMPSnoopingMaxUserThis object indicates the status of the IGMP snooping max user function. The invalid value is 0.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.23.1.31 |
hwAPTrafficProfilePriorityDscpUpMap8021pThis object indicates the mapping relationship between DSCP and 802.1p. DSCP values range from 0 to 63. Two mapped data are separated by a comma.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.23.1.32 |
hwAPTrafficProfilePriority80211eUpMap8021pThis object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.23.1.33 |
hwAPTrafficProfilePriority8021pDnMap80211eThis object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.23.1.34 |
hwAPTrafficProfileFilterTableThis table is used to configure QoS filter information. SEQUENCE OF HwAPTrafficProfileFilterEntry .1.3.6.1.4.1.2011.6.139.11.1.24 |
hwAPTrafficProfileFilterEntryThe indexes of this table are hwAPTrafficProfileName, hwAPTrafficProfileFilterType, and hwAPTrafficProfileFilterDirection. HwAPTrafficProfileFilterEntry .1.3.6.1.4.1.2011.6.139.11.1.24.1 |
hwAPTrafficProfileFilterDirectionThis object indicates the ACL rule direction for packet filtering in a traffic profile. This parameter has no default value. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.24.1.1 |
hwAPTrafficProfileFilterTypeThis object indicates the ACL rule type for packet filtering in a traffic profile. This parameter has no default value. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.24.1.2 |
hwAPTrafficProfileFilterACLIDThis object indicates the ACL rule for packet filtering in a traffic profile.rw Integer32 (3000..3031 | 4000..4031 | 6000..6031) .1.3.6.1.4.1.2011.6.139.11.1.24.1.3 |
hwAPTrafficProfileFilterRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.24.1.4 |
hwWlanVlanPoolTableThis table is used to configure VLAN pools. SEQUENCE OF HwWlanVlanPoolEntry .1.3.6.1.4.1.2011.6.139.11.1.25 |
hwWlanVlanPoolEntryThe index of this table is hwVlanPoolName. HwWlanVlanPoolEntry .1.3.6.1.4.1.2011.6.139.11.1.25.1 |
hwVlanPoolNameThis object indicates the VLAN pool name. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.25.1.1 |
hwVlanPoolVlanlistThis object indicates the VLAN list.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.25.1.2 |
hwVlanPoolAssignMethodThis object indicates the VLAN pool allocation algorithm. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.25.1.3 |
hwVlanPoolRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.25.1.4 |
hwWlanStaWhitelistConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.26 |
hwWlanStaWhitelistProfileTableThis table is used to create STA whitelist profiles. SEQUENCE OF HwWlanStaWhitelistProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.26.1 |
hwWlanStaWhitelistProfileEntryThe index of this table is hwWlanStaWhitelistProfileName. HwWlanStaWhitelistProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.26.1.1 |
hwWlanStaWhitelistProfileNameThis object indicates the name of a STA whitelist profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.26.1.1.1 |
hwWlanStaWhitelistProfileRowStatusThis object indicates the row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.26.1.1.2 |
hwWlanStaWhitelistProfileConfigTableThis table is used to configure STA whitelist profiles. SEQUENCE OF HwWlanStaWhitelistProfileConfigEntry .1.3.6.1.4.1.2011.6.139.11.1.26.2 |
hwWlanStaWhitelistProfileConfigEntryThe indexes of this table are hwWlanStaWhitelistProfileName and hwWlanStaWhitelistStaMac. HwWlanStaWhitelistProfileConfigEntry .1.3.6.1.4.1.2011.6.139.11.1.26.2.1 |
hwWlanStaWhitelistStaMacThis object indicates the whitelist. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.26.2.1.1 |
hwWlanStaWhitelistRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.26.2.1.2 |
hwWlanStaWhitelistStaMacDescriptionThis object indicates the description of the sta-mac.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.26.2.1.3 |
hwWlanStaBlacklistConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.27 |
hwWlanStaBlacklistProfileTableThis table is used to create STA blacklist profiles. SEQUENCE OF HwWlanStaBlacklistProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.27.1 |
hwWlanStaBlacklistProfileEntryThe index of this table is hwWlanStaBlacklistProfileName. HwWlanStaBlacklistProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.27.1.1 |
hwWlanStaBlacklistProfileNameThis object indicates the STA blacklist profile name. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.27.1.1.1 |
hwWlanStaBlacklistProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.27.1.1.2 |
hwWlanStaBlacklistProfileConfigTableThis table is used to configure STA blacklist profiles. SEQUENCE OF HwWlanStaBlacklistProfileConfigEntry .1.3.6.1.4.1.2011.6.139.11.1.27.2 |
hwWlanStaBlacklistProfileConfigEntryThe indexes of this table are hwWlanStaBlacklistProfileName and hwWlanStaBlacklistStaMac. HwWlanStaBlacklistProfileConfigEntry .1.3.6.1.4.1.2011.6.139.11.1.27.2.1 |
hwWlanStaBlacklistStaMacThis object indicates the blacklist. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.27.2.1.1 |
hwWlanStaBlacklistRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.27.2.1.2 |
hwWlanStaBlacklistStaMacDescriptionThis object indicates the description of the sta-mac.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.27.2.1.3 |
hwWidsProfileTableThis table is used to configure WIDS classify profiles, WIDS attack profiles, and WIDS contain profiles. SEQUENCE OF HwWidsProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.28 |
hwWidsProfileEntryThe index of this table is hwWidsProfileName. HwWidsProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.28.1 |
hwWidsProfileNameThis object indicates the name of a WIDS profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.28.1.1 |
hwWidsProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.28.1.5 |
hwWidsDeviceReportIntervalThis object indicates the device detection reporting interval. The default value is 300 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.6 |
hwWidsDeviceSyncIntervalThis object indicates the interval for APs to report all device information to an AC. The default value is 360 minutes.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.7 |
hwWidsSpoofProfileThis object indicates the name of a WIDS spoof profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.28.1.8 |
hwWidsWhitelistProfileThis object indicates the name of a WIDS confident profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.28.1.9 |
hwWidsBruteForceDetectIntervalThis object indicates the interval for brute force attack detection. The default value is 60. It is expressed in s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.10 |
hwWidsBruteForceDetectThresholdThis object indicates the threshold for the number of brute force attack attempts, namely, the threshold for the number of key negotiation failures within a detection period. If the number of brute-force attack attempts exceeds the threshold, the terminal initiates brute force attacks. The default value is 20.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.11 |
hwWidsBruteForceQuietTimeThis object indicates the quiet period for brute force attack alarm reporting. The default value is 600 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.12 |
hwWidsFloodDetectIntervalThis object indicates the flood attack detection interval. The default value is 60. It is expressed in s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.13 |
hwWidsFloodDetectThresholdThis object indicates the threshold for food attack detection. If the number of packets of the same type received within a detection period exceeds the threshold, flood attacks occur. The default value is 300.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.14 |
hwWidsFloodQuietTimeThis object indicates the quiet period for flood attack alarm reporting. The default value is 600 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.15 |
hwWidsWeakIvQuietTimeThis object indicates the quiet period for weak IV attack alarm reporting. The default value is 600 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.16 |
hwWidsSpoofQuietTimeThis object indicates the quiet period for spoofing attack alarm reporting. The default value is 600 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.17 |
hwWidsDynamicBlackListSwitchThis object indicates the status of the dynamic blacklist function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.28.1.18 |
hwWidsRogueContainModeBmpThis object indicates the bit map of rogue device countering types. The default value is 0.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.28.1.19 |
hwWidsStaWhitelistProfileThis object indicates the name of a sta whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.28.1.20 |
hwWidsSpoofProfileTableThis table is used to configure matching rules for spoof APs. SEQUENCE OF HwWidsSpoofProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.32 |
hwWidsSpoofProfileEntryThe indexes of this table are hwWidsSpoofProfileName and hwWidsSpoofSsidRegex. HwWidsSpoofProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.32.1 |
hwWidsSpoofProfileNameThis object indicates the name of a WIDS spoof profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.32.1.1 |
hwWidsSpoofSsidRegexThis object indicates the matching rules for spoofing SSIDs. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.32.1.2 |
hwWidsSpoofProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.32.1.3 |
hwWidsWhitelistProfileMacTableThis table is used to configure WIDS MAC whitelists. SEQUENCE OF HwWidsWhitelistProfileMacEntry .1.3.6.1.4.1.2011.6.139.11.1.33 |
hwWidsWhitelistProfileMacEntryThe index of this table is hwWidsWhitelistProfileName. HwWidsWhitelistProfileMacEntry .1.3.6.1.4.1.2011.6.139.11.1.33.1 |
hwWidsWhitelistProfileNameThis object indicates the name of a WIDS confident profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.33.1.1 |
hwWidsWhitelistProfileMacThis object indicates the MAC address whitelist. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.33.1.2 |
hwWidsWhitelistProfileMacRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.33.1.3 |
hwWidsWhitelistProfileOuiTableThis table is used to configure WIDS OUI whitelists. SEQUENCE OF HwWidsWhitelistProfileOuiEntry .1.3.6.1.4.1.2011.6.139.11.1.34 |
hwWidsWhitelistProfileOuiEntryThe index of this table is hwWidsWhitelistProfileOui. HwWidsWhitelistProfileOuiEntry .1.3.6.1.4.1.2011.6.139.11.1.34.1 |
hwWidsWhitelistProfileOuiThis object indicates the index of the OUI whitelist in the WIDS confident profile. Its format is XX-XX-XX. XX is a hexadecimal number. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.34.1.1 |
hwWidsWhitelistProfileOuiRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.34.1.2 |
hwWidsWhitelistProfileSsidTableThis table is used to configure WIDS SSID whitelists. SEQUENCE OF HwWidsWhitelistProfileSsidEntry .1.3.6.1.4.1.2011.6.139.11.1.35 |
hwWidsWhitelistProfileSsidEntryThe index of this table is hwWidsWhitelistProfileSsid. HwWidsWhitelistProfileSsidEntry .1.3.6.1.4.1.2011.6.139.11.1.35.1 |
hwWidsWhitelistProfileSsidThis object indicates the trusted SSIDs that are case-sensitive. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.35.1.1 |
hwWidsWhitelistProfileSsidRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.35.1.2 |
hwWlanMeshProfileTableThis table is used to configure and query Mesh profile parameters. SEQUENCE OF HwWlanMeshProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.36 |
hwWlanMeshProfileEntryThe index of this table is hwWlanMeshProfileName. HwWlanMeshProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.36.1 |
hwWlanMeshProfileNameThis object indicates the name of a mesh profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.36.1.1 |
hwWlanMeshIDThis object indicates the mesh ID. The value is a string of case-sensitive characters without question marks (and spaces. It cannot begin or end with double quotation marks. The default value is huaweimesh.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.36.1.2 |
hwWlanMeshDhcpTrustPortThis object indicates whether to enable the DHCP trusted port on an AP. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.36.1.3 |
hwWlanMeshLinkReportIntervalThis object indicates the interval for reporting mesh link information. The default value is 30 seconds.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.4 |
hwWlanMeshMaxLinkNumIn FWA mode, the maximum number of Mesh links supported is 32,otherwise, it is 8rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.5 |
hwWlanMeshRssiThresholdThis object indicates the valid RSSI threshold for a Mesh link route. The default value is -75 dBm.rw Integer32 (-90..-20) .1.3.6.1.4.1.2011.6.139.11.1.36.1.6 |
hwWlanMeshSecurityProfileNameThe object indicates the bound security profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.36.1.8 |
hwWlanMeshProfileHandoverProfileNameThe object indicates the bound handover profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.36.1.9 |
hwWlanMeshFwaSwitchThis object indicates the status of the FWA mode function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.36.1.10 |
hwWlanMeshFwaEdcaModeThis object indicates the EDCA mode in FWA mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.36.1.11 |
hwWlanMeshProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.36.1.12 |
hwWlanMeshClientEdcaVoiceECWmaxThis object indicates the exponent form of the maximum contention window (ECWmax) for AC_VO packets. ECWmin and ECWmax determine the average backoff time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.13 |
hwWlanMeshClientEdcaVoiceECWminThis object indicates the exponent form of the minimum contention window (ECWmin) for AC_VO packets. ECWmin and ECWmax determine the average backoff time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.14 |
hwWlanMeshClientEdcaVoiceAIFSNThis object indicates the AIFSN for AC_VO packets, which determines the channel idle time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.15 |
hwWlanMeshClientEdcaVoiceTXOPLimitThis object indicates the transmission opportunity limit (TXOPLimit) for AC_VO packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.16 |
hwWlanMeshClientEdcaVideoECWmaxThis object indicates the exponent form of the maximum contention window (ECWmax) for AC_VI packets. ECWmin and ECWmax determine the average backoff time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.17 |
hwWlanMeshClientEdcaVideoECWminThis object indicates the exponent form of the minimum contention window (ECWmin) for AC_VI packets. ECWmin and ECWmax determine the average backoff time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.18 |
hwWlanMeshClientEdcaVideoAIFSNThis object indicates the AIFSN for AC_VI packets, which determines the channel idle time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.19 |
hwWlanMeshClientEdcaVideoTXOPLimitThis object indicates the transmission opportunity limit (TXOPLimit) for AC_VI packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.20 |
hwWlanMeshClientEdcaBeECWmaxThis object indicates the exponent form of the maximum contention window (ECWmax) for AC_BE packets. ECWmin and ECWmax determine the average backoff time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.21 |
hwWlanMeshClientEdcaBeECWminThis object indicates the exponent form of the minimum contention window (ECWmin) for AC_BE packets. ECWmin and ECWmax determine the average backoff time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.22 |
hwWlanMeshClientEdcaBeAIFSNThis object indicates the AIFSN for AC_BE packets, which determines the channel idle time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.23 |
hwWlanMeshClientEdcaBeTXOPLimitThis object indicates the transmission opportunity limit (TXOPLimit) for AC_BE packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.24 |
hwWlanMeshClientEdcaBkECWmaxThis object indicates the exponent form of the maximum contention window (ECWmax) for AC_BK packets. ECWmin and ECWmax determine the average backoff time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.25 |
hwWlanMeshClientEdcaBkECWminThis object indicates the exponent form of the minimum contention window (ECWmin) for AC_BK packets. ECWmin and ECWmax determine the average backoff time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.26 |
hwWlanMeshClientEdcaBkAIFSNThis object indicates the AIFSN for AC_BK packets, which determines the channel idle time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.27 |
hwWlanMeshClientEdcaBkTXOPLimitThis object indicates the transmission opportunity limit (TXOPLimit) for AC_BK packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.28 |
hwWlanMeshNdTrustPortThis object indicates whether to enable the ND trusted port on an AP. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.36.1.29 |
hwWlanMeshLinkAgingTimeThis object indicates the mesh aging time.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.36.1.30 |
hwWlanMeshProfilePriorityMapTrustModeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.36.1.31 |
hwWlanMeshProfilePriorityDscpMap80211eDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.36.1.32 |
hwWlanMeshProfileClientModeSwitchThis object indicates the status of the Mesh client mode function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.36.1.33 |
hwWlanMeshProfileBeacon2gRateThis object indicates the mesh 2g beacon rate. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.36.1.34 |
hwWlanMeshProfileBeacon5gRateThis object indicates the mesh 5g beacon rate. The default value is 6.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.36.1.35 |
hwWlanMeshWhitelistProfileTableThis table describes the Mesh whitelist profile. SEQUENCE OF HwWlanMeshWhitelistProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.37 |
hwWlanMeshWhitelistProfileEntryThe index of this table is hwWlanMeshWhitelistProfileName. HwWlanMeshWhitelistProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.37.1 |
hwWlanMeshWhitelistProfileNameThis object indicates the name of a mesh profile. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.37.1.1 |
hwWlanMeshWhitelistProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.37.1.2 |
hwWlanMeshWhitelistProfileConfigTableThis table describes Mesh whitelists in the Mesh whitelist profile. SEQUENCE OF HwWlanMeshWhitelistProfileConfigEntry .1.3.6.1.4.1.2011.6.139.11.1.38 |
hwWlanMeshWhitelistProfileConfigEntryIndexes of this table are hwWlanMeshWhitelistProfileName and hwWlanMeshWhitelistPeerApMac. HwWlanMeshWhitelistProfileConfigEntry .1.3.6.1.4.1.2011.6.139.11.1.38.1 |
hwWlanMeshWhitelistPeerApMacThis object indicates the whitelist. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.38.1.1 |
hwWlanMeshWhitelistRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.38.1.2 |
hwWlanMeshHandoverProfileTableThis table is used to configure and query Mesh handover profile parameters. SEQUENCE OF HwWlanMeshHandoverProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.39 |
hwWlanMeshHandoverProfileEntryThe index of this table is hwWlanMeshHandoverProfileName. HwWlanMeshHandoverProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.39.1 |
hwWlanMeshHandoverProfileNameThis object indicates the name of a mesh profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.39.1.1 |
hwWlanMeshHOLinkProbeIntervalDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.2 |
hwWlanMeshHOMinRssiThresholdDescription.rw Integer32 (-90..-20) .1.3.6.1.4.1.2011.6.139.11.1.39.1.3 |
hwWlanMeshHOMaxRssiThresholdDescription.rw Integer32 (-90..0) .1.3.6.1.4.1.2011.6.139.11.1.39.1.4 |
hwWlanMeshHOLinkHoldPeriodDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.5 |
hwWlanMeshHORssiMarginDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.6 |
hwWlanMeshHOLocationBasedAlgorithmEnableDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.39.1.7 |
hwWlanMeshHOMovingDirectionDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.39.1.8 |
hwWlanMeshHOPNCriteriaObserveTimeDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.9 |
hwWlanMeshHOPNCriteriaQualifyTimeDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.10 |
hwWlanMeshUrgentHandoverLowRateThresholdDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.11 |
hwWlanMeshUrgentHandoverLowRatePeriodDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.12 |
hwWlanMeshUrgentHandoverPunishmentPeriodDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.13 |
hwWlanMeshUrgentHandoverPunishmentRssiDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.39.1.14 |
hwWlanMeshHandoverProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.39.1.15 |
hwWdsProfileTableThis table is used to configure and query WDS profile parameters. SEQUENCE OF HwWdsProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.40 |
hwWdsProfileEntryThe index of this table is hwWdsProfileName. HwWdsProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.40.1 |
hwWdsProfileNameThis object indicates the name of a WDS profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.40.1.1 |
hwWdsNameThis object indicates the WDS identifier. The value is a string of case-sensitive characters without question marks and spaces. It cannot begin or end with double quotation marks.
The default value is huaweiwds.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.40.1.2 |
hwWdsModeThis object indicates the mode of the WDS. The default value is 3.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.40.1.3 |
hwWdsDhcpTrustPortThis object indicates whether to enable the DHCP trusted port on an AP. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.40.1.4 |
hwWdsVlanTaggedThis object indicates the tagged VLAN in a bridge profile. It is used to add one or a group of VLANs to the WDS bridge profile in tagged mode. By default, no VLAN is configured in the WDS bridge profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.40.1.5 |
hwWdsSecurityProfileNameThe object indicates the bound security profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.40.1.6 |
hwWdsProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ROWSTATUS_NOTREADY: notReady ROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.40.1.8 |
hwWdsNdTrustPortThis object indicates whether to enable the ND trusted port on an AP. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.40.1.9 |
hwWdsProfilePriorityMapTrustModeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.40.1.10 |
hwWdsProfilePriorityDscpMap80211eDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.40.1.11 |
hwWdsMuMIMOSwitchDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.40.1.12 |
hwWdsProfileBeacon2gRateThis object indicates the wds 2g beacon rate. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.40.1.13 |
hwWdsProfileBeacon5gRateThis object indicates the wds 5g beacon rate. The default value is 6.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.40.1.14 |
hwWdsWhitelistProfileTableDescription. SEQUENCE OF HwWdsWhitelistProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.41 |
hwWdsWhitelistProfileEntryDescription. HwWdsWhitelistProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.41.1 |
hwWdsWhitelistProfileNameDescription. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.41.1.1 |
hwWdsWhitelistProfileRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.41.1.2 |
hwWdsWhitelistTableDescription. SEQUENCE OF HwWdsWhitelistEntry .1.3.6.1.4.1.2011.6.139.11.1.42 |
hwWdsWhitelistEntryDescription. HwWdsWhitelistEntry .1.3.6.1.4.1.2011.6.139.11.1.42.1 |
hwWdsWhitelistPeerApMacDescription. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.42.1.1 |
hwWdsWhitelistRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.42.1.2 |
hwLocationProfileTableThis table is used to configure terminal location and tag location. SEQUENCE OF HwLocationProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.43 |
hwLocationProfileEntryThe index of this table is hwLocationProfileName. HwLocationProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.43.1 |
hwLocationProfileNameThis object indicates the name of a location profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.43.1.1 |
hwLocationAeroscoutTagSwitchThis object indicates the status of the AeroScout tag location function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.43.1.2 |
hwLocationAeroscoutMuSwitchThis object indicates the status of the AeroScout MU location function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.43.1.3 |
hwLocationAeroscoutServerPortThis object indicates the port used by APs or ACs to report AeroScout location data to the AE server.rw Unsigned32 (0 | 1025..65535) .1.3.6.1.4.1.2011.6.139.11.1.43.1.4 |
hwLocationAeroscoutViaACSwitchThis object indicates whether AeroScout tag location data is reported to the AC. This parameter has no default value.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.43.1.5 |
hwLocationAeroscoutViaACPortThis object indicates that AeroScout location data is reported to the AC that forwards the data to the AE. A port is configured for the AP to report location data to the AC.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.43.1.6 |
hwLocationAeroscoutCompoundTimeThis object indicates the AerosScout location data compound time. The value 0 indicates that data is not compounded and the AP reports location data in real time. The default value is 65535 and the unit is 0.1s.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.43.1.7 |
hwLocationEkahauTagEnableThis object indicates the status of the Ekahau tag location function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.43.1.8 |
hwLocationEkahauServerIPAddressThis object indicates the IP address of the location server for Ekahau tag location.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.43.1.9 |
hwLocationEkahauServerIPv6AddressThis object indicates the IPv6 address of the location server for Ekahau tag location.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.43.1.10 |
hwLocationEkahauServerPortThis object indicates the port number of the location server for Ekahau tag location.rw Unsigned32 (0 | 1025..65535) .1.3.6.1.4.1.2011.6.139.11.1.43.1.11 |
hwLocationEkahauViaACEnableThis object indicates whether Ekahau tag location data is reported to the AC.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.43.1.12 |
hwLocationEkahauViaACPortThis object indicates that Ekahau location data is reported to the AC that forwards the data to the AE. A port is configured for the AP to report location data to the AC.rw Unsigned32 (0 | 1025..65535) .1.3.6.1.4.1.2011.6.139.11.1.43.1.13 |
hwLocationSourceIPAddressThis object indicates the source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.43.1.14 |
hwLocationSourceIPv6AddressThis object indicates the source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.43.1.15 |
hwLocationPrivateMuEnableThis object indicates the status of the Huawei proprietary terminal location function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.43.1.16 |
hwLocationPrivateServerIPAddressThis object indicates the IP address of the server for the Huawei proprietary location function.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.43.1.17 |
hwLocationPrivateServerIPv6AddressThis object indicates the IPv6 address of the server for the Huawei proprietary location function.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.43.1.18 |
hwLocationPrivateServerPortThis object indicates the port number of the server for the Huawei proprietary location function.rw Unsigned32 (0|5000..65535) .1.3.6.1.4.1.2011.6.139.11.1.43.1.19 |
hwLocationPrivateViaACEnableThis object indicates whether Huawei proprietary terminal location data is reported to the AC. The default value is 2.1: Enable2: Disablerw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.43.1.20 |
hwLocationPrivateViaACPortThis object indicates that Huawei proprietary terminal location data is reported to the AC that forwards the data to the location server. A port is configured for the AP to report location data to the AC.
The default destination IP address and port number to which the AP reports terminal location data is the AC's IP address and 6411 respectively.rw Unsigned32 (0|5000..65535) .1.3.6.1.4.1.2011.6.139.11.1.43.1.21 |
hwLocationPrivateReportFrequencyThis object indicates the interval for the AP to report location data in Huawei proprietary terminal location mode. The default value is 20000 ms.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.43.1.22 |
hwLocationProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefinedROWSTATUS_ACTIVE: activeROWSTATUS_NOTINSERVICE: notInServiceROWSTATUS_NOTREADY: notReadyROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.43.1.23 |
hwHotspot2ProfileTableThis table is used to configure and query Hotspot2.0 profile parameters. SEQUENCE OF HwHotspot2ProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.45 |
hwHotspot2ProfileEntryThe index of this table is hwHotspot2ProfileName. HwHotspot2ProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.45.1 |
hwHotspot2ProfileNameThis object indicates the name of a Hotspot2.0 profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.1 |
hwHotspot2NetworkTypeThis object indicates that the network type is an interworking information element. This configuration is mandatory. The AP adds this information to Beacon and Probe Response packets, which indicates network types, to assist users in discovering and selecting networks. The default value is 15.0: Private-network1: private-guest2: public-chargeable3: public-free4: personal-device5: emergency-service14: Test15: Wildcardrw Unsigned32 (0..1|2..3|4..5|14..15) .1.3.6.1.4.1.2011.6.139.11.1.45.1.2 |
hwHotspot2InternetAccessThis object indicates that the Internet attribute is an interworking information element. This configuration is mandatory. The AP adds this information to Beacon and Probe Response packets, which indicates whether users are allowed to access the Internet, to assist users in discovering and selecting networks. The default value is 2.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.45.1.3 |
hwHotspot2VenueGroupCodeFor details, see Table 7-25m-Venue Group codes and descriptions in the 802.11u protocol.
The default value 0xFFFFFFFF indicates that no configuration is added.rw Unsigned32 (0..255|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.45.1.4 |
hwHotspot2VenueTypeCodeFor details, see Table 7-25n-Venue Type assignments in the 802.11u protocol.
The default value 0xFFFFFFFF indicates that no configuration is added.rw Unsigned32 (0..255|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.45.1.5 |
hwHotspot2HessidThis object indicates the HESSID of a hot spot network. The default value is null, indicating that no configuration is added.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.45.1.6 |
hwHotspot2IPv4AddressAvailThis object indicates available types of IPv4 addresses. 8 to 63 are reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Address type not available.1: Public IPv4 address available,2: Port-restricted IPv4 address available,3: Single NATed private IPv4 address available,4: Double NATed private IPv4 address available,5: Port-restricted IPv4 address and single NATed IPv4 address available,6: Port-restricted IPv4 address and double NATed IPv4 address available,7: Availability of the address type is not known,8 to 63: Reservedrw Unsigned32 (0..7|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.45.1.7 |
hwHotspot2IPv6AddressAvailThis object indicates available types of IPv4 addresses. 3 is reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Address type not available1: Address type available2: Availability of the address type not known3: Reservedrw Unsigned32 (0..2|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.45.1.8 |
hwHotspot2NetworkAuthenTypeThis object indicates the network authentication type. 4 to 255 are reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Acceptance of terms and conditions.1: On-line enrollment supported,2: http/https redirection,3: DNS redirection,4 to 255: Reservedrw Unsigned32 (0..3|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.45.1.9 |
hwHotspot2RedirectUrlThis object indicates the redirection URL.This parameter is optional when Network Authentication Type is set to acceptance.This parameter is mandatory when Network Authentication Type is set to http-https-redirection.This parameter is not configurable when Network Authentication Type is set to other values.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.10 |
hwHotspot2CarryP2PCrossConnectInfoThis object indicates whether hot spot networks allow P2P devices to set up cross connections. Currently, this function is not supported. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.45.1.11 |
hwHotspot2CellularNetworkProfileThis object indicates the bound cellular network profile. By default, no cellular network profile is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.12 |
hwHotspot2ConnectionCapabilityProfileThis object indicates the bound connection capability profile. By default, no connection capability profile is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.13 |
hwHotspot2OperatorNameProfileThis object indicates the bound operator name profile. By default, no operator name profile is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.14 |
hwHotspot2OperatingClassProfileThis object indicates the bound operating class profile. By default, no operating class profile is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.15 |
hwHotspot2OperatorDomainProfileThis object indicates the bound operator domain profile. By default, no operator domain profile is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.16 |
hwHotspot2NaiRealmProfileThis object indicates the bound NAI realm profile. By default, no NAI realm profile is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.17 |
hwHotspot2VenueNameProfileThis object indicates the bound venue name profile. By default, no venue name profile is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.18 |
hwHotspot2RoamingConsortiumProfileThis object indicates the bound roaming consortium profile. By default, no roaming consortium profile is bound.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.45.1.19 |
hwHotspot2ProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefinedROWSTATUS_ACTIVE: activeROWSTATUS_NOTINSERVICE: notInServiceROWSTATUS_NOTREADY: notReadyROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.45.1.20 |
hwCellularNetworkProfileTableThis table is used to configure and query cellular network profile parameters. SEQUENCE OF HwCellularNetworkProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.46 |
hwCellularNetworkProfileEntryThe index of this table is hwCellularNetworkProfileName. HwCellularNetworkProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.46.1 |
hwCellularNetworkProfileNameThis object indicates the name of a cellular network profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.46.1.1 |
hwCellularNetworkProfilePlmnIDListNOTE By default, no configuration is added.PLMNs are separated by question marks (?).A maximum of 32 PLMNs can be configured.A PLMN is a 5-digit or 6-digit numeric string.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.46.1.2 |
hwCellularNetworkProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.46.1.3 |
hwConnectionCapabilityProfileTableThis table is used to configure and query connection capability profile parameters. SEQUENCE OF HwConnectionCapabilityProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.47 |
hwConnectionCapabilityProfileEntryThe index of this table is hwConnectionCapabilityProfileName. HwConnectionCapabilityProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.47.1 |
hwConnectionCapabilityProfileNameThis object indicates the name of a connection capability profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.47.1.1 |
hwConnectionCapabilityEspThis object indicates whether ESP is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.2 |
hwConnectionCapabilityIcmpThis object indicates whether ICMP is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.3 |
hwConnectionCapabilityTcpFtpThis object indicates whether FTP(TCP) is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.4 |
hwConnectionCapabilityTcpHttpThis object indicates whether HTTP (port 80) is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.5 |
hwConnectionCapabilityTcpPptpVpnThis object indicates whether PPTP for VPN services (port 1723) is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.6 |
hwConnectionCapabilityTcpSshThis object indicates whether SSH is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.7 |
hwConnectionCapabilityTcpTlsVpnThis object indicates whether TLS VPN (port 443) is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.8 |
hwConnectionCapabilityTcpVoipThis object indicates whether VoIP (port 5060) is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.9 |
hwConnectionCapabilityUdpIke2Port4500This object indicates whether IKEv2 (port 4500) is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.10 |
hwConnectionCapabilityUdpIke2Port500This object indicates whether IKEv2 (port 500) is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.11 |
hwConnectionCapabilityUdpVoipThis object indicates whether VoIP (port 5060) is supported.
The default value is unknown(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.47.1.12 |
hwConnectionCapabilityProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.47.1.13 |
hwOperatorNameProfileTableThis table is used to configure and query operator name profile parameters. SEQUENCE OF HwOperatorNameProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.48 |
hwOperatorNameProfileEntryThe index of this table is hwOperatorNameProfileName. HwOperatorNameProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.48.1 |
hwOperatorNameProfileNameThis object indicates the name of an operator name profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.48.1.1 |
hwOperatorNameLanguageCodeListA value of LanguageCode indicates a language. It is a string of 2-3 characters.
chi/zho/zh indicates Chinese and eng/en indicates English.
NOTE By default, no configuration is added.Values of LanguageCode are separated by question marks (?).A maximum of 32 LanguageCode values can be configured.A LanguageCode value must match a FriendlyName value.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.48.1.2 |
hwOperatorFriendlyNameListNOTE By default, no configuration is added.A FriendlyName value is a string of 1-32 characters. FriendlyName values are separated by question marks (?).A maximum of 32 FriendlyName values can be configured.A LanguageCode value must match a FriendlyName value.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.48.1.3 |
hwOperatorNameProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.48.1.4 |
hwOperatorClassProfileTableThis table is used to configure operating class profile parameters. SEQUENCE OF HwOperatorClassProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.49 |
hwOperatorClassProfileEntryThe index of this table is hwOperatorClassProfileName. HwOperatorClassProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.49.1 |
hwOperatorClassProfileNameThis object indicates the name of an operating class profile profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.49.1.1 |
hwOperatorClassIndicationListNOTE By default, no configuration is added.A value of OperatorClassIndication is an integer that ranges from 1 to 255.A maximum of 32 OperatorClassIndication values can be configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.49.1.2 |
hwOperatorClassProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.49.1.3 |
hwOperatorDomainNameProfileTableThis table is used to configure and query operator domain profile parameters. SEQUENCE OF HwOperatorDomainNameProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.50 |
hwOperatorDomainNameProfileEntryThe index of this table is hwOperatorDomainNameProfileName. HwOperatorDomainNameProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.50.1 |
hwOperatorDomainNameProfileNameThis object indicates the name of an operating class profile profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.50.1.1 |
hwOperatorDomainNameListNOTE By default, no configuration is added.A DomainName value is a string of 1-64 characters in compliance with RFC1035.DomainName values are separated by question marks (?).A maximum of 32 DomainName values can be configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.50.1.2 |
hwOperatorDomainNameProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.50.1.3 |
hwNAIRealmProfileTableThis table is used to configure and query NAI realm profile parameters. SEQUENCE OF HwNAIRealmProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.51 |
hwNAIRealmProfileEntryIndexes of this table are hwNAIRealmProfileName, hwNAIRealmName, hwNAIRealmEapMethodType, and hwNAIRealmEapAuthenID. HwNAIRealmProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.51.1 |
hwNAIRealmProfileNameThis object indicates the name of a NAI realm profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.51.1.1 |
hwNAIRealmNameThis object indicates a network identifier. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.51.1.2 |
hwNAIRealmEapMethodTypeThis object indicates the authorization type.
The default value is 0xffffffff that indicates that the following four types are supported: EAP_AKA, EAP_SIM, EAP_TLS, and EAP_TTLS. Unsigned32 (0..255 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.51.1.3 |
hwNAIRealmEapAuthenIDThis object indicates the authorization ID.
The default value is 0xffffffff that indicates that all IDs within the value range are supported. Unsigned32 (0..255 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.51.1.4 |
hwNAIRealmEapAuthenParaThis object indicate authorization parameter.
The default value is 0xffffffff that indicates all parameters within the value range are supported.rw Unsigned32 (0..255 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.51.1.5 |
hwNAIRealmProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.51.1.6 |
hwVenueNameProfileTableThis table is used to configure and query venue name profile parameters. SEQUENCE OF HwVenueNameProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.52 |
hwVenueNameProfileEntryThe index of this table is hwVenueNameProfileName. HwVenueNameProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.52.1 |
hwVenueNameProfileNameThis object indicates the name of a venue name profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.52.1.1 |
hwVenueNameLanguageCodeListA value of LanguageCode indicates a language. It is a string of 2-3 characters.
For details about GUI value ranges, see ISO 639 on the Codes for the Representation of Names of Languages page. The path is http://www.loc.gov/standards/iso639-2/php/ code_list.php. chi/zho/zh indicates Chinese and eng/en indicates English.
NOTE By default, no configuration is added.Values of LanguageCode are separated by question marks (?).A maximum of 32 LanguageCode values can be configured.A LanguageCode value must match a VenueName value.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.52.1.2 |
hwVenueNameListIf the language-code is set to eng, the name is a string of characters. Rules are the same as those for SSIDs. When it is set to other values, the venue-name is set to a hexadecimal UTF-8 code because current WLANs support English only, for example, venue-name language-code ZHO name 025AB1472568.
NOTE By default, no configuration is added.A venue-name value cannot exceed 32 characters.venue-name values are separated by question marks (?).A LanguageCode value must match a VenueName value.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.52.1.3 |
hwVenueNameProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.52.1.4 |
hwRoamingConsortiumProfileTableThis table is used to configure and query roaming consortium profile parameters. SEQUENCE OF HwRoamingConsortiumProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.53 |
hwRoamingConsortiumProfileEntryThe index of this table is hwRoamingConsortiumProfileName. HwRoamingConsortiumProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.53.1 |
hwRoamingConsortiumProfileNameThis object indicates the name of a roaming consortium profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.53.1.1 |
hwRoamingConsortiumOIListThis object indicates the roaming consortium member.
The roaming consortium OI is a hexadecimal number in the format of HH-HH-HH or HH-HH-HH-HH-HH. The length of a roaming consortium OI is three to five bytes, for example, 12-34-56?12-34-58?34-45-67.
NOTE By default, no configuration is added.RoamingConsortiumOI values are separated by question marks (?).A maximum of 32 RoamingConsortiumOI values can be configured.A RoamingConsortiumOI value must match an OIInBeacon value.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.53.1.2 |
hwRoamingConsortiumOIInBeaconListThis object indicates whether a roaming consortium member carries the inbeacon tag, for example, YES?NO?NO.
NOTE By default, no configuration is added.A RoamingConsortiumOI value must match an OIInBeacon value.A maximum of three RoamingConsortiumOI values can be configured.in-beacon can be set to YES.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.53.1.3 |
hwRoamingConsortiumProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.53.1.4 |
hwSACProfileTableThis table is used to configure and query SAC profile parameters. SEQUENCE OF HwSACProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.54 |
hwSACProfileEntryThe index of this table is hwSACProfileName. HwSACProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.54.1 |
hwSACProfileNameThis object indicates the name of an SAC profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.54.1.1 |
hwSACProfUserStatThis object indicates whether the user statistics function is enabled in the SAC profile.
The default value is disable (1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.54.1.2 |
hwSACProfVapStatThis object indicates whether the VAP statistics function is enabled in the SAC profile.
The default value is disable (1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.54.1.3 |
hwSACProfRowStatusThis object indicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.54.1.4 |
hwSACProfileActionTableThis table describes SAC profile action configurations.This table is used to configure actions in an SAC profile. SEQUENCE OF HwSACProfileActionEntry .1.3.6.1.4.1.2011.6.139.11.1.55 |
hwSACProfileActionEntryIndexes of this table are hwSACProfileName and hwSACProfileActionIndex. HwSACProfileActionEntry .1.3.6.1.4.1.2011.6.139.11.1.55.1 |
hwSACProfileActionIndexThis object indicates the internal index of the action. It is the index of the table. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.55.1.1 |
hwSACProfileActProtocolTypeThis object indicates the protocol type.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.55.1.2 |
hwSACProfileActProtocolNameThis object indicates the protocol name.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.55.1.3 |
hwSACProfileActProtocolGrpNameThis object indicates the protocol group name.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.55.1.4 |
hwSACProfileActionTypeThis object indicates the action type.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.55.1.5 |
hwSACProfileActCarCirThis object indicates the CAR CIR value.rw Unsigned32 (64..10000000|4294967295) .1.3.6.1.4.1.2011.6.139.11.1.55.1.6 |
hwSACProfileActRemarkDscpValueThis object indicates the DSCP value.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.55.1.7 |
hwSACProfileActRemark8021pValueThis object indicates the 802.1p priority.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.55.1.8 |
hwSACProfileActionRowstatusThis object indicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.55.1.9 |
hwWlanAPProvision OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.56 |
hwWlanAPProvisionAddressModeThis object indicates the IPv4 address allocation mode.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.56.1 |
hwWlanAPProvisionIPv4AddressThis object indicates the AP's IPv4 address.
hwWlanAPProvisionIPv4Address takes effect if hwAPIPv4Method is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.56.2 |
hwWlanAPProvisionIPv4MaskThis object indicates the AP's IPv4 mask.
hwWlanAPProvisionIPv4Mask takes effect if hwAPIPv4Method is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.56.3 |
hwWlanAPProvisionIPv4GatewayThis object indicates the AP's IPv4 gateway.
hwWlanAPProvisionIPv4Gateway takes effect if hwAPIPv4Method is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.56.4 |
hwWlanAPProvisionIPv6AddressThis object indicates the AP's IPv6 address.
hwWlanAPProvisionIPv6Address takes effect if hwAPIPv6Method is set to static.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.56.5 |
hwWlanAPProvisionIPv6PrefixLenThis object indicates the length of the IPv6 address prefix.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.56.6 |
hwWlanAPProvisionIPv6GatewayThis object indicates the AP's IPv6 gateway.
hwWlanAPProvisionIPv6Gateway takes effect if hwAPIPv6Method is set to static.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.56.7 |
hwWlanAPProvisionGroupNameThis object indicates the group name.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.56.8 |
hwWlanAPProvisionNameThis object indicates the name of an AP.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.56.9 |
hwWlanAPProvisionIPv4ACListThis object indicates the AC IPv4 address list.
NOTE ACL rules are separated by question marks (?).A maximum of four ACL rules can be configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.56.10 |
hwWlanAPProvisionIPv6ACListThis object indicates the AC IPv6 address list.
NOTE ACL rules are separated by question marks (?).A maximum of four ACL rules can be configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.56.11 |
hwWlanAPProvisionCommitAPNameThis object indicates that the configuration is delivered based on AP names.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.56.12 |
hwWlanAPProvisionCommitAPMacThis object indicates that the configuration is delivered based on MAC addresses of APs.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.56.13 |
hwWlanAPProvisionCommitAPGroupThis object indicates that the configuration is delivered based on AP groups.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.56.14 |
hwWlanAPProvisionAPModeThis object indicates the AP mode.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.56.15 |
hwWlanAPProvisionCommitAPIdThis object indicates that the configuration is delivered based on AP ID.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.56.16 |
hwWlanAPProvisionCommitAllThis object indicates that the configuration is delivered to all APs.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.56.17 |
hwWlanRadioCalibrateManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.57 |
hwWlanRadioCalibrateModeThis object indicates the radio calibration mode.
The default value is auto(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.57.1 |
hwWlanRadioCalibrateScheduleTimeThis object indicates the scheduled radio calibration time.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.57.2 |
hwWlanRadioCalibrateManualStartupThis object indicates the manually triggered radio calibration. It is valid only when the radio calibration mode is manual.rw Integer32 (1) .1.3.6.1.4.1.2011.6.139.11.1.57.3 |
hwWlanRadioCalibrateAutoIntervalThis object indicates the automatic radio calibration interval.
It is expressed in minutes.
The default value is 1440.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.57.4 |
hwWlanRadioCalibratePolicyThis object indicates the radio calibration policy.bit0: rogue-ap bit1: nonWifi bit2: load
The default value is 0, indicating that this function is not enabled.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.57.5 |
hwWlanRadioCalibrateSensitivityThis object indicates the radio calibration sensitivity.
The default value is medium(2).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.57.6 |
hwWlanRadioCalibrateAutoStartTimeThis object indicates the start time of automatic radio calibration.
The default value is 00:00:00.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.57.7 |
hwWlanMobilityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.58 |
hwWlanMobilityManagement OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.58.1 |
hwWlanMasterControllerSwitchThis object indicates the status of the CUC function.
The default value is disable (1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.1.1 |
hwWlanConnectMasterControllerSwitchThis objection indicates the status of the connection between the AC and Master Controller. The establishment of connection between the AC and Master Controller requires the IP address of the Master Controller.
The default value is disconnect(1).rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.1.2 |
hwWlanConnectMasterControllerIPv4AddrThis object indicates the IPv4 address of the CUC that needs to set up a link with the Master Controller.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.58.1.3 |
hwWlanConnectMasterControllerIPv6AddrThis object indicates the IPv6 address of the CUC that needs to set up a link with the Master Controller.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.58.1.4 |
hwWlanMobilityServerIPv4Description.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.58.1.5 |
hwWlanMobilityServerIPv6Description.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.58.1.6 |
hwWlanMobilityServerStateDescription.ro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.1.7 |
hwWlanMobilityServerSwitchDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.1.8 |
hwWlanMobilityAcTableDescription. SEQUENCE OF HwWlanMobilityAcEntry .1.3.6.1.4.1.2011.6.139.11.1.58.2 |
hwWlanMobilityAcEntryThe index of this table is hwWlanMemAcIndex. HwWlanMobilityAcEntry .1.3.6.1.4.1.2011.6.139.11.1.58.2.1 |
hwWlanMemAcIndexThis object indicates the AP ID. Integer32 .1.3.6.1.4.1.2011.6.139.11.1.58.2.1.1 |
hwWlanAcIPv4AddressThis object indicates the AC's IPv4 address.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.58.2.1.2 |
hwWlanAcIPv6AddressThis object indicates the AC's IPv6 address.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.58.2.1.3 |
hwWlanAcStateThis object indicates the state of connections to the AC.ro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.2.1.4 |
hwWlanAcRowStatusThis object indicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.58.2.1.5 |
hwWlanMobilityGroupTableDescription. SEQUENCE OF HwWlanMobilityGroupEntry .1.3.6.1.4.1.2011.6.139.11.1.58.3 |
hwWlanMobilityGroupEntryThe index of this table is hwWlanMobilityGroupName. HwWlanMobilityGroupEntry .1.3.6.1.4.1.2011.6.139.11.1.58.3.1 |
hwWlanMobilityGroupNameThis object indicates the mobility group name. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.58.3.1.1 |
hwWlanMobilityGroupRowStatusThis object indicates to add or delete mobility groups.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.58.3.1.2 |
hwWlanMobilityGroupMemberTableDescription. SEQUENCE OF HwWlanMobilityGroupMemberEntry .1.3.6.1.4.1.2011.6.139.11.1.58.4 |
hwWlanMobilityGroupMemberEntryIndexes of this table are hwWlanMobilityGroupName and hwWlanMobilityGroupMemberACIndex. HwWlanMobilityGroupMemberEntry .1.3.6.1.4.1.2011.6.139.11.1.58.4.1 |
hwWlanMobilityGroupMemberACIndexThis object indicates mobility group members (AC ID). Integer32 .1.3.6.1.4.1.2011.6.139.11.1.58.4.1.1 |
hwWlanMobilityGroupMemberRowStatusThis object indicates to add or delete mobility group members.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.58.4.1.2 |
hwWlanMobilityMemberIPv4TableDescription. SEQUENCE OF HwWlanMobilityMemberIPv4Entry .1.3.6.1.4.1.2011.6.139.11.1.58.5 |
hwWlanMobilityMemberIPv4EntryDescription. HwWlanMobilityMemberIPv4Entry .1.3.6.1.4.1.2011.6.139.11.1.58.5.1 |
hwWlanMobilityMemberIPv4AddrDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.58.5.1.1 |
hwWlanMobilityMemberIPv4DescriptionDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.58.5.1.2 |
hwWlanMobilityMemberIPv4StateDescription.ro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.5.1.3 |
hwWlanMobilityMemberIPv4RowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.58.5.1.4 |
hwWlanMobilityMemberIPv6TableDescription. SEQUENCE OF HwWlanMobilityMemberIPv6Entry .1.3.6.1.4.1.2011.6.139.11.1.58.6 |
hwWlanMobilityMemberIPv6EntryDescription. HwWlanMobilityMemberIPv6Entry .1.3.6.1.4.1.2011.6.139.11.1.58.6.1 |
hwWlanMobilityMemberIPv6AddrDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.58.6.1.1 |
hwWlanMobilityMemberIPv6DescriptionDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.58.6.1.2 |
hwWlanMobilityMemberIPv6StateDescription.ro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.6.1.3 |
hwWlanMobilityMemberIPv6RowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.58.6.1.4 |
hwWlanMobilityClientIPv4TableDescription. SEQUENCE OF HwWlanMobilityClientIPv4Entry .1.3.6.1.4.1.2011.6.139.11.1.58.7 |
hwWlanMobilityClientIPv4EntryDescription. HwWlanMobilityClientIPv4Entry .1.3.6.1.4.1.2011.6.139.11.1.58.7.1 |
hwWlanMobilityClientIPv4AddrDescription.ro IpAddress .1.3.6.1.4.1.2011.6.139.11.1.58.7.1.1 |
hwWlanMobilityClientIPv4StateDescription.ro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.7.1.2 |
hwWlanMobilityClientIPv6TableDescription. SEQUENCE OF HwWlanMobilityClientIPv6Entry .1.3.6.1.4.1.2011.6.139.11.1.58.8 |
hwWlanMobilityClientIPv6EntryDescription. HwWlanMobilityClientIPv6Entry .1.3.6.1.4.1.2011.6.139.11.1.58.8.1 |
hwWlanMobilityClientIPv6AddrDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.58.8.1.1 |
hwWlanMobilityClientIPv6StateDescription.ro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.58.8.1.2 |
hwWlanLanguageCodeTableIt is the language code table. It complies with ISO 639 and is used by hotspot networks to obtain language code information. SEQUENCE OF HwWlanLanguageCodeEntry .1.3.6.1.4.1.2011.6.139.11.1.59 |
hwWlanLanguageCodeEntryThe index of this table is hwWlanLanguageCode. HwWlanLanguageCodeEntry .1.3.6.1.4.1.2011.6.139.11.1.59.1 |
hwWlanLanguageCodeThis object indicates the language code. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.59.1.1 |
hwWlanLanguageCodeDescriptionThis object indicates the description of language codes.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.59.1.2 |
hwFatApConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.60 |
hwFatApGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.60.1 |
hwFatApCountryCodeDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.1.1 |
hwFatApMaxStaNumDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.1.2 |
hwFatApStaAccessModeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.1.3 |
hwFatApStaAccessModePorfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.1.4 |
hwFatApHighTempThresholdDescription.rw Unsigned32 (20..100|65535) .1.3.6.1.4.1.2011.6.139.11.1.60.1.5 |
hwFatApLowTempThresholdDescription.rw Integer32 (-70..10|65535) .1.3.6.1.4.1.2011.6.139.11.1.60.1.6 |
hwFatApDcaChannel5GBandwidthDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.1.7 |
hwFatApDcaChannel5GChannelSetDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.1.8 |
hwFatApDcaChannel2GChannelSetDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.1.9 |
hwFatApDynamicBlackAgingTimeDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.1.10 |
hwFatApAntennaOutputModeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.1.11 |
hwFatApRadioTableDescription. SEQUENCE OF HwFatApRadioEntry .1.3.6.1.4.1.2011.6.139.11.1.60.2 |
hwFatApRadioEntryDescription. HwFatApRadioEntry .1.3.6.1.4.1.2011.6.139.11.1.60.2.1 |
hwFatApRadioDescription. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.1 |
hwFatApRadio0FrequencyDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.2 |
hwFatApRadio2gProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.3 |
hwFatApRadio5gProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.4 |
hwFatApRadioMeshProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.5 |
hwFatApLocationProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.7 |
hwFatApRadioRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.8 |
hwFatApMeshWhitelistProfileThis object indicates the bound whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.9 |
hwFatApWdsWhitelistProfileThis object indicates the bound whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.10 |
hwFatApRadioSwitchThis object indicates the name of a 2G radio profile. It is the index of the table.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.11 |
hwFatApRadioChannelThis object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.12 |
hwFatApRadioBandwidthThis object indicate a bandwidth. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.13 |
hwFatApRadioEirpThis object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.14 |
hwFatApRadioAntennaGainThis object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.rw Unsigned32 (0..30 | 255) .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.15 |
hwFatApRadioCoverageDistanceThis object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.16 |
hwFatApRadioWorkModeThis object indicates the radio working mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.17 |
hwFatApWidsDeviceDetectSwitchThis object indicates the status of the device detection function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.18 |
hwFatApWidsAttackDetectEnBmpThis object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.19 |
hwFatApWidsRogueContainSwitchThis object indicates the status of the device detection function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.20 |
hwFatApRadioSecondChannelThis object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.2.1.21 |
hwFatApVapTableDescription. SEQUENCE OF HwFatApVapEntry .1.3.6.1.4.1.2011.6.139.11.1.60.3 |
hwFatApVapEntryDescription. HwFatApVapEntry .1.3.6.1.4.1.2011.6.139.11.1.60.3.1 |
hwFatApWlanIdDescription. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.3.1.1 |
hwFatApRadioIdDescription. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.60.3.1.2 |
hwFatApVapProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.60.3.1.3 |
hwFatApVapProfileRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.60.3.1.4 |
hwNAIRealmProfileListTableThis table describes the NAI realm profile. SEQUENCE OF HwNAIRealmProfileListEntry .1.3.6.1.4.1.2011.6.139.11.1.61 |
hwNAIRealmProfileListEntryThe index of this table is hwNAIRealmProfileListProfileName. HwNAIRealmProfileListEntry .1.3.6.1.4.1.2011.6.139.11.1.61.1 |
hwNAIRealmProfileListProfileNameThis object indicates the profile name. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.61.1.1 |
hwNAIRealmProfileListRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.61.1.2 |
hwWidsSpoofProfileListTableThis table is used to create or delete WIDS spoof SSID profiles. SEQUENCE OF HwWidsSpoofProfileListEntry .1.3.6.1.4.1.2011.6.139.11.1.62 |
hwWidsSpoofProfileListEntryThe index of this table is hwWidsSpoofProfileListProfileName. HwWidsSpoofProfileListEntry .1.3.6.1.4.1.2011.6.139.11.1.62.1 |
hwWidsSpoofProfileListProfileNameThis object indicates the name of a WIDS spoof SSID profile. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.62.1.1 |
hwWidsSpoofProfileListRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.62.1.2 |
hwWidsWhitelistProfileListTableThis table is used to create or delete WIDS confident profiles. SEQUENCE OF HwWidsWhitelistProfileListEntry .1.3.6.1.4.1.2011.6.139.11.1.63 |
hwWidsWhitelistProfileListEntryThe index of this table is hwWidsWhitelistProfileListProfileName. HwWidsWhitelistProfileListEntry .1.3.6.1.4.1.2011.6.139.11.1.63.1 |
hwWidsWhitelistProfileListProfileNameThis object indicates the name of a WIDS confident profile. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.63.1.1 |
hwWidsWhitelistProfileListRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.63.1.2 |
hwWlanLoadBalanceStaticGroupTableThis table records information about the static load balancing group. SEQUENCE OF HwWlanLoadBalanceStaticGroupEntry .1.3.6.1.4.1.2011.6.139.11.1.64 |
hwWlanLoadBalanceStaticGroupEntryThe index of this table is hwWlanLBGroupName. HwWlanLoadBalanceStaticGroupEntry .1.3.6.1.4.1.2011.6.139.11.1.64.1 |
hwWlanLBGroupNameThis object indicates the name of the static load balancing group. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.64.1.1 |
hwWlanLBGapThresholdThis object indicates the load difference threshold of a static load balancing group.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.64.1.2 |
hwWlanLBDenyThresholdThis object indicates the maximum number of times an AP rejects association requests of a STA in the static load balancing group.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.64.1.3 |
hwWlanLBStartThresholdThis object indicates the start threshold for load balancing in a static load balancing group.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.64.1.4 |
hwWlanLBGroupStatusThis object indicates the load balancing status in the static load balancing group.1: Load is not balanced.2: Load is balanced.ro Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.64.1.5 |
hwWlanLBGroupRowStatusThis object indicates the row status of this table, which can be createAndGo(4) or destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.64.1.6 |
hwWlanLoadBalanceStaticGroupMemberTableThis table records information about members in the static load balancing group. SEQUENCE OF HwWlanLoadBalanceStaticGroupMemberEntry .1.3.6.1.4.1.2011.6.139.11.1.65 |
hwWlanLoadBalanceStaticGroupMemberEntryThe indexes of this table are hwWlanLBGroupName, hwWlanApName, and hwWlanRadioID. HwWlanLoadBalanceStaticGroupMemberEntry .1.3.6.1.4.1.2011.6.139.11.1.65.1 |
hwWlanLBMemberRowStatusThis object indicates the row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.65.1.1 |
hwWlanCountryCodeTableDescription. SEQUENCE OF HwWlanCountryCodeEntry .1.3.6.1.4.1.2011.6.139.11.1.66 |
hwWlanCountryCodeEntryDescription. HwWlanCountryCodeEntry .1.3.6.1.4.1.2011.6.139.11.1.66.1 |
hwWlanCountryCodeDescription. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.1 |
hwWlanCountryCodeEngDescriptionDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.2 |
hwWlanCountryCodeAvailableChannelSet2gBW20Description.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.3 |
hwWlanCountryCodeAvailableChannelSet2gBW40PlusDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.4 |
hwWlanCountryCodeAvailableChannelSet2gBW40MinusDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.5 |
hwWlanCountryCodeAvailableChannelSet5gBW20Description.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.6 |
hwWlanCountryCodeAvailableChannelSet5gBW40PlusDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.7 |
hwWlanCountryCodeAvailableChannelSet5gBW40MinusDescription.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.8 |
hwWlanCountryCodeAvailableChannelSet5gBW80Description.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.9 |
hwWlanCountryCodeAvailableChannelSet5gBW160Description.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.66.1.10 |
hwUCCProfileTableThis table is used to configure and query UCC profile parameters. SEQUENCE OF HwUCCProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.67 |
hwUCCProfileEntryThe index of this table is hwUCCProfileName. HwUCCProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.67.1 |
hwUCCProfileNameThis object indicates the name of a UCC profile. It is the index of the table. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.67.1.1 |
hwUCCProfLyncVoice8021pThis object indicates the switch of lync-voice remark 8021p.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.67.1.2 |
hwUCCProfLyncVoice8021pValueThis object indicates the value of lync-voice remark 8021p.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.67.1.3 |
hwUCCProfLyncVoiceDscpThis object indicates the switch of lync-voice remark dscp.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.67.1.4 |
hwUCCProfLyncVoiceDscpValueThis object indicates the value of lync-voice remark dscp.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.67.1.5 |
hwUCCProfLyncVideo8021pThis object indicates the switch of lync-video remark 8021p.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.67.1.6 |
hwUCCProfLyncVideo8021pValueThis object indicates the value of lync-video remark 8021p.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.67.1.7 |
hwUCCProfLyncVideoDscpThis object indicates the switch of lync-video remark dscp.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.67.1.8 |
hwUCCProfLyncVideoDscpValueThis object indicates the value of lync-video remark dscp.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.67.1.9 |
hwUCCProfLyncShare8021pThis object indicates the switch of lync-destop-share remark 8021p.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.67.1.10 |
hwUCCProfLyncShare8021pValueThis object indicates the value of lync-destop-share remark 8021p.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.67.1.11 |
hwUCCProfLyncShareDscpThis object indicates the switch of lync-destop-share remark dscp.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.67.1.12 |
hwUCCProfLyncShareDscpValueThis object indicates the value of lync-destop-share remark dscp.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.67.1.13 |
hwUCCProfLyncFileTransfer8021pThis object indicates the switch of lync-file-transfer remark 8021p.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.67.1.14 |
hwUCCProfLyncFileTransfer8021pValueThis object indicates the value of lync-file-transfer remark 8021p.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.67.1.15 |
hwUCCProfLyncFileTransferDscpThis object indicates the switch of lync-file-transfer remark dscp.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.67.1.16 |
hwUCCProfLyncFileTransferDscpValueThis object indicates the value of lync-file-transfer remark dscp.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.67.1.17 |
hwUCCProfileRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.67.1.18 |
hwSoftgreProfileTableDescription. SEQUENCE OF HwSoftgreProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.68 |
hwSoftgreProfileEntryDescription. HwSoftgreProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.68.1 |
hwSoftgreProfileNameDescription. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.68.1.1 |
hwSoftgreDestinationIPAddressDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.68.1.2 |
hwSoftgreDestinationIPv6AddressDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.68.1.3 |
hwSoftgreKeepaliveFlagDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.68.1.4 |
hwSoftgreKeepalivePeriodDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.68.1.5 |
hwSoftgreKeepaliveRetryTimesDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.68.1.6 |
hwSoftgreProfileRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.68.1.7 |
hwWlanIDIndexedAPSpecificTableThis table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it. SEQUENCE OF HwWlanIDIndexedAPSpecificEntry .1.3.6.1.4.1.2011.6.139.11.1.69 |
hwWlanIDIndexedAPSpecificEntryThe index of this table is hwWlanIDIndexedAPSpApId. HwWlanIDIndexedAPSpecificEntry .1.3.6.1.4.1.2011.6.139.11.1.69.1 |
hwWlanIDIndexedAPSpApIdThis object indicates the AP ID. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.69.1.1 |
hwWlanIDIndexedAPSpAPSystemProfileThis object indicates the system profile bound to the AP specific profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.2 |
hwWlanIDIndexedAPSpDomainProfileThis object indicates the domain profile bound to the AP specific profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.3 |
hwWlanIDIndexedAPSpApMacThis object indicates the MAC address of an AP.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.69.1.4 |
hwWlanIDIndexedAPSpApTypeInfoThis object indicates the domain profile bound to the AP specific profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.5 |
hwWlanIDIndexedAPSpWidsProfileThis object indicates the bound WIDS profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.6 |
hwWlanIDIndexedAPSpRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.69.1.7 |
hwWlanIDIndexedAPSpBleProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.8 |
hwWlanIDIndexedAPSpLongitudeThis object indicates the longitude.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.9 |
hwWlanIDIndexedAPSpLatitudeThis object indicates the latitude.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.10 |
hwWlanIDIndexedSpApAddressModeThis object indicates the IP address allocation mode.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.69.1.11 |
hwWlanIDIndexedSpApIPv4AddressThis object indicates the AP's IPv4 address.
hwWlanIDIndexedSpApIPv4Address takes effect if hwWlanIDIndexedSpApAddressMode is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.69.1.12 |
hwWlanIDIndexedSpApIPv4MaskThis object indicates the AP's IPv4 mask.
hwWlanIDIndexedSpApIPv4Mask takes effect if hwWlanIDIndexedSpApAddressMode is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.69.1.13 |
hwWlanIDIndexedSpApIPv4GatewayThis object indicates the AP's IPv4 gateway.
hwWlanIDIndexedSpApIPv4Gateway takes effect if hwWlanIDIndexedSpApAddressMode is set to static.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.69.1.14 |
hwWlanIDIndexedSpApIPv6AddressThis object indicates the AP's IPv6 address.
hwWlanIDIndexedSpApIPv6Address takes effect if hwWlanIDIndexedSpApAddressMode is set to static.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.15 |
hwWlanIDIndexedSpApIPv6PrefixLenThis object indicates the length of the IPv6 address prefix.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.69.1.16 |
hwWlanIDIndexedSpApIPv6GatewayThis object indicates the AP's IPv6 gateway.
hwWlanIDIndexedSpApIPv6Gateway takes effect if hwWlanIDIndexedSpApAddressMode is set to static.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.17 |
hwWlanIDIndexedSpIPv4ACListThis object indicates the AC IPv4 address list.
NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.18 |
hwWlanIDIndexedSpIPv6ACListThis object indicates the AC IPv6 address list.
NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.19 |
hwWlanIDIndexedSpGroupNameDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.20 |
hwWlanIDIndexedSpApNameDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.69.1.21 |
hwIDIndexedAPSpecificWiredPortTableThis table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile.. SEQUENCE OF HwIDIndexedAPSpecificWiredPortEntry .1.3.6.1.4.1.2011.6.139.11.1.70 |
hwIDIndexedAPSpecificWiredPortEntryIndexes of this table are hwIDIndexedAPSpWPInterfaceType, hwIDIndexedAPSpWPInterfaceNum and hwWlanIDIndexedAPSpApId. HwIDIndexedAPSpecificWiredPortEntry .1.3.6.1.4.1.2011.6.139.11.1.70.1 |
hwIDIndexedAPSpWPInterfaceTypeThis object indicates the interface type. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.70.1.1 |
hwIDIndexedAPSpWPInterfaceNumThis object indicates the interface index. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.70.1.2 |
hwIDIndexedAPSpWPProfileThis object indicates the bound wired port profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.70.1.3 |
hwIDIndexedAPSpWPRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.70.1.4 |
hwIDIndexedAPSpecificRadioTableThis table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile. SEQUENCE OF HwIDIndexedAPSpecificRadioEntry .1.3.6.1.4.1.2011.6.139.11.1.71 |
hwIDIndexedAPSpecificRadioEntryIndexes of this table are hwIDIndexedAPSpRadio and hwWlanIDIndexedAPSpApId. HwIDIndexedAPSpecificRadioEntry .1.3.6.1.4.1.2011.6.139.11.1.71.1 |
hwIDIndexedAPSpRadioThis object indicates the radio ID. It is the index of the table. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.71.1.1 |
hwIDIndexedAPSp5gRadioProfileThis object indicates the bound 5G radio profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.71.1.2 |
hwIDIndexedAPSpMeshProfileThis object indicates the bound Mesh profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.71.1.3 |
hwIDIndexedAPSpWdsProfileThis object indicates the bound WDS profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.71.1.4 |
hwIDIndexedAPSpLocationProfileThis object indicates the bound location profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.71.1.5 |
hwIDIndexedAPSpRadio2gProfileThis object indicates the system profile to which AP groups are bound. The default value is default.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.71.1.6 |
hwIDIndexedAPSpMeshWhitelistProfileThis object indicates the bound whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.71.1.7 |
hwIDIndexedAPSpWdsWhitelistProfileThis object indicates the bound whitelist profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.71.1.8 |
hwIDIndexedAPSpRadioSwitchThis object indicates the name of a 2G radio profile. It is the index of the table.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.71.1.9 |
hwIDIndexedAPSpRadioChannelThis object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.71.1.10 |
hwIDIndexedAPSpRadioBandwidthThis object indicate a bandwidth. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.71.1.11 |
hwIDIndexedAPSpRadioEirpThis object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.rw Unsigned32 (1..127 | 255) .1.3.6.1.4.1.2011.6.139.11.1.71.1.12 |
hwIDIndexedAPSpRadioAntennaGainThis object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.rw Unsigned32 (0..30 | 255) .1.3.6.1.4.1.2011.6.139.11.1.71.1.13 |
hwIDIndexedAPSpRadioCoverageDistanceThis object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.rw Unsigned32 (1..400 | 65535) .1.3.6.1.4.1.2011.6.139.11.1.71.1.14 |
hwIDIndexedAPSpRadioWorkModeThis object indicates the radio working mode. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.71.1.15 |
hwIDIndexedAPSpRadioFrequencyThis object indicates the setting of the frequency band for radio 0. The default value is 1 ? 1: frequency2G ? 2: frequency5G.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.71.1.16 |
hwIDIndexedAPSpSpectrumAnalysisSwitchThis object indicates the status of the spectrum analysis function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.71.1.17 |
hwIDIndexedAPSpWidsDeviceDetectSwitchThis object indicates the status of the device detection function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.71.1.18 |
hwIDIndexedAPSpWidsAttackDetectEnBmpThis object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.71.1.19 |
hwIDIndexedAPSpWidsRogueContainSwitchThis object indicates the status of the device detection function. The default value is 1.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.71.1.20 |
hwIDIndexedAPSpRadioRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.71.1.21 |
hwIDIndexedAPSpRadioSecondChannelThis object indicates a second radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.71.1.22 |
hwIDIndexedAPSpecificVapTableThis table is used to create VAPs in an AP specific profile. SEQUENCE OF HwIDIndexedAPSpecificVapEntry .1.3.6.1.4.1.2011.6.139.11.1.72 |
hwIDIndexedAPSpecificVapEntryIndexes of this table are hwIDIndexedAPSpWlan, hwIDIndexedAPSpRadio, and hwWlanIDIndexedAPSpApId. HwIDIndexedAPSpecificVapEntry .1.3.6.1.4.1.2011.6.139.11.1.72.1 |
hwIDIndexedAPSpWlanThis object indicates the WLAN ID. It is the index of the table. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.72.1.1 |
hwIDIndexedAPSpVapProfileThis object indicates the bound VAP profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.72.1.2 |
hwIDIndexedAPSpVapRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.72.1.3 |
hwBleProfileTableDescription. SEQUENCE OF HwBleProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.73 |
hwBleProfileEntryDescription. HwBleProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.73.1 |
hwWlanBLEProfileNameDescription. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.73.1.1 |
hwWlanBLEBroadcasterEnableDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.73.1.2 |
hwWlanBLETxPowerDescription.rw Integer32 UNITS "dbm" .1.3.6.1.4.1.2011.6.139.11.1.73.1.3 |
hwWlanBLEBroadcastingUUIDThis object indicates the string type value of UUID field in the BLE broadcast frame.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.73.1.4 |
hwWlanBLEBroadcastingMajorThis object indicates the string type value of Major field in the BLE broadcast frame.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.73.1.5 |
hwWlanBLEBroadcastingMinorThis object indicates the string type value of Minor field in the BLE broadcast frame.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.73.1.6 |
hwWlanBLEBroadcastingReferenceRSSIDescription.rw Integer32 (-97..-50 | 0) UNITS "dbm" .1.3.6.1.4.1.2011.6.139.11.1.73.1.7 |
hwWlanBLEBroadcastingIntervalDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.73.1.8 |
hwWlanBLESnifferEnableDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.73.1.9 |
hwWlanBLEProfileRowStatusThis object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.73.1.10 |
hwWlanBLEBroadcastingUUIDHexThis object indicates the hex type value of UUID field in the BLE broadcast frame.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.73.1.11 |
hwWlanBLEBroadcastingMajorHexThis object indicates the hex type value of Major field in the BLE broadcast frame.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.73.1.12 |
hwWlanBLEBroadcastingMajorDecimalThis object indicates the decimal type value of Major field in the BLE broadcast frame. The default value is -1.rw Integer32 (-1 | 0..65535) .1.3.6.1.4.1.2011.6.139.11.1.73.1.13 |
hwWlanBLEBroadcastingMinorHexThis object indicates the hex type value of Minor field in the BLE broadcast frame.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.73.1.14 |
hwWlanBLEBroadcastingMinorDecimalThis object indicates the decimal type value of Minor field in the BLE broadcast frame. The default value is -1.rw Integer32 (-1 | 0..65535) .1.3.6.1.4.1.2011.6.139.11.1.73.1.15 |
hwAPGroupCardTableDescription. SEQUENCE OF HwAPGroupCardEntry .1.3.6.1.4.1.2011.6.139.11.1.74 |
hwAPGroupCardEntryDescription. HwAPGroupCardEntry .1.3.6.1.4.1.2011.6.139.11.1.74.1 |
hwAPGrpCardIndexDescription. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.74.1.1 |
hwAPGrpCardSerialProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.74.1.2 |
hwAPGrpCardProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.74.1.3 |
hwAPGrpCardNetUDPPortDescription.rw Unsigned32 (1025..55535 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.74.1.4 |
hwAPGrpIoTRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.74.1.5 |
hwAPGrpCardNetTCPPortDescription.rw Unsigned32 (1025..55535 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.74.1.6 |
hwAPSpecificCardTableDescription. SEQUENCE OF HwAPSpecificCardEntry .1.3.6.1.4.1.2011.6.139.11.1.75 |
hwAPSpecificCardEntryDescription. HwAPSpecificCardEntry .1.3.6.1.4.1.2011.6.139.11.1.75.1 |
hwAPSpIoTIndexDescription. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.75.1.1 |
hwAPSpIoTSerialProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.75.1.2 |
hwAPSpIoTProfileDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.75.1.3 |
hwAPSpIoTNetUDPPortDescription.rw Unsigned32 (1025..55535 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.75.1.4 |
hwAPSpIoTRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.75.1.5 |
hwAPSpIoTNetTCPPortDescription.rw Unsigned32 (1025..55535 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.75.1.6 |
hwIoTSerialProfileTableDescription. SEQUENCE OF HwIoTSerialProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.76 |
hwIoTSerialProfileEntryDescription. HwIoTSerialProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.76.1 |
hwIoTSerialProfileNameDescription. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.76.1.1 |
hwIoTSerialSpeedDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.76.1.2 |
hwIoTSerialParityDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.76.1.3 |
hwIoTSerialStopbitsDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.76.1.4 |
hwIoTSerialFrameFormatDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.76.1.5 |
hwIoTSerialFrameLengthDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.76.1.6 |
hwIoTSerialFrameStartDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.76.1.7 |
hwIoTSerialFrameStopDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.76.1.8 |
hwIoTSerialProfileRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.76.1.9 |
hwIoTProfileTableDescription. SEQUENCE OF HwIoTProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.77 |
hwIoTProfileEntryDescription. HwIoTProfileEntry .1.3.6.1.4.1.2011.6.139.11.1.77.1 |
hwIoTProfileNameDescription. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.77.1.1 |
hwIoTProfileConfigAgentPermitIpDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.77.1.2 |
hwIoTProfileConfigAgentPermitMaskLenDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.77.1.3 |
hwIoTProfileShareKeyDescription.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.77.1.4 |
hwIoTProfileRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.77.1.5 |
hwIoTProfileManagementServerTableDescription. SEQUENCE OF HwIoTProfileManagementServerEntry .1.3.6.1.4.1.2011.6.139.11.1.78 |
hwIoTProfileManagementServerEntryDescription. HwIoTProfileManagementServerEntry .1.3.6.1.4.1.2011.6.139.11.1.78.1 |
hwIoTProfileManagementServerIndexDescription. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.78.1.1 |
hwIoTProfileManagementServerIpDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.78.1.2 |
hwIoTProfileManagementServerPortDescription.rw Unsigned32 (1025..55535 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.78.1.3 |
hwIoTProfileManagementServerRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.78.1.4 |
hwVapAntiAttackUserDefFloodTableThis table describes SAC profile action configurations.This table is used to configure actions in an SAC profile. SEQUENCE OF HwVapAntiAttackUserDefFloodEntry .1.3.6.1.4.1.2011.6.139.11.1.79 |
hwVapAntiAttackUserDefFloodEntryIndexes of this table are hwVapAntiAttackDefFloodIndex and hwVapProfileName. HwVapAntiAttackUserDefFloodEntry .1.3.6.1.4.1.2011.6.139.11.1.79.1 |
hwVapAntiAttackDefFloodIndexThis object indicates the internal index of the action. It is the index of the table. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.79.1.1 |
hwVapAntiAttackDefFloodProtocolTypeThis object indicates the protocol type.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.79.1.2 |
hwVapAntiAttackDefFloodProtocolValueThis object indicates the protocol value.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.79.1.3 |
hwVapAntiAttackDefFloodStaRateThresholdThis object indicates the anti-attack user-defined flood sta-rate-threshold for the VAP.rw Unsigned32 (1..500 | 4294967295) .1.3.6.1.4.1.2011.6.139.11.1.79.1.4 |
hwVapAntiAttackDefFloodBlacklistSwitchThis object indicates the status of the VAP anti-attack user-defined flood blacklist function.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.79.1.5 |
hwVapAntiAttackDefFloodRowStatusThis object indicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.79.1.6 |
hwApProfIGMPSnoopingGroupTableDescription. SEQUENCE OF HwApProfIGMPSnoopingGroupEntry .1.3.6.1.4.1.2011.6.139.11.1.80 |
hwApProfIGMPSnoopingGroupEntryDescription. HwApProfIGMPSnoopingGroupEntry .1.3.6.1.4.1.2011.6.139.11.1.80.1 |
hwAPProfIGMPSnoopingGroupIndexDescription. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.80.1.1 |
hwAPProfIGMPSnoopingGroupStartGroupAddrDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.80.1.2 |
hwAPProfIGMPSnoopingGroupEndGroupAddrDescription.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.80.1.3 |
hwAPProfIGMPSnoopingGroupBandwidthDescription.rw Unsigned32 (4294967295 | 1..100000) .1.3.6.1.4.1.2011.6.139.11.1.80.1.4 |
hwAPProfIGMPSnoopingGroupRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.80.1.5 |
hwAPWiredPortProfileTrafficRemarkTableDescription. SEQUENCE OF HwAPWiredPortProfileTrafficRemarkEntry .1.3.6.1.4.1.2011.6.139.11.1.81 |
hwAPWiredPortProfileTrafficRemarkEntryDescription. HwAPWiredPortProfileTrafficRemarkEntry .1.3.6.1.4.1.2011.6.139.11.1.81.1 |
hwAPWiredPortProfileTrafficRemarkDirectionDescription. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.81.1.1 |
hwAPWiredPortProfileTrafficRemarkIPTypeDescription. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.81.1.2 |
hwAPWiredPortProfileTrafficRemarkACLIDDescription.rw Unsigned32 (3000..3031 | 4000..4031) .1.3.6.1.4.1.2011.6.139.11.1.81.1.3 |
hwAPWiredPortProfileTrafficRemarkTypeDescription.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.81.1.4 |
hwAPWiredPortProfileTrafficRemarkValueDescription.rw Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.81.1.5 |
hwAPWiredPortProfileTrafficRemarkRowStatusDescription.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.81.1.6 |
hwAPTrafficProfileRemarkTableDescription. SEQUENCE OF HwAPTrafficProfileRemarkEntry .1.3.6.1.4.1.2011.6.139.11.1.82 |
hwAPTrafficProfileRemarkEntryDescription. HwAPTrafficProfileRemarkEntry .1.3.6.1.4.1.2011.6.139.11.1.82.1 |
hwAPTrafficProfileRemarkDirectionThis object indicates the ACL rule direction for packet remarking in a traffic profile. This parameter has no default value. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.82.1.1 |
hwAPTrafficProfileRemarkIPTypeThis object indicates the ACL rule type for packet remarking in a traffic profile. This parameter has no default value. Enumeration .1.3.6.1.4.1.2011.6.139.11.1.82.1.2 |
hwAPTrafficProfileRemarkACLIDThis object indicates the ACL rule for packet remarking in a traffic profile.rw Integer32 (3000..3031 | 4000..4031 | 6000..6031) .1.3.6.1.4.1.2011.6.139.11.1.82.1.3 |
hwAPTrafficProfileRemarkTypeThis object indicates the ACL rule type for packet remarking in a traffic profile. This parameter has no default value.rw Enumeration .1.3.6.1.4.1.2011.6.139.11.1.82.1.4 |
hwAPTrafficProfileRemarkValueThis object indicates the ACL rule value for packet remarking in a traffic profile. This parameter has no default value.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.82.1.5 |
hwAPTrafficProfileRemarkRowStatusThis object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.82.1.6 |
hwWlanClusterConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.83 |
hwWlanClusterMasterConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.83.1 |
hwWlanClusterMasterIPv4AddressThis object indicates the IPv4 address of the master controller.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.83.1.1 |
hwWlanClusterMasterIPv6AddressThis object indicates the IPv6 address of the master controller.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.1.2 |
hwWlanClusterPskThis object indicates the psk of the master controller.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.1.3 |
hwWlanClusterRedundancyConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.83.2 |
hwWlanClusterRedundancyLocalIPv4AddressThis object indicates the IPv4 address of the local ac.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.83.2.1 |
hwWlanClusterRedundancyLocalIPv6AddressThis object indicates the IPv6 address of the local ac.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.2.2 |
hwWlanClusterRedundancyPeerIPv4AddressThis object indicates the IPv4 address of the peer ac.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.83.2.3 |
hwWlanClusterRedundancyPeerIPv6AddressThis object indicates the IPv6 address of the peer ac.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.2.4 |
hwWlanClusterRedundancyTrackVRRPIDThis object indicates the vrrp id.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.83.2.5 |
hwWlanClusterRedundancyTrackInterfaceThis object indicates the interface index.rw Integer32 .1.3.6.1.4.1.2011.6.139.11.1.83.2.6 |
hwWlanClusterRedundancyPskThis object indicates the psk of the redundancy ac.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.2.7 |
hwWlanClusterLocalIPv4TableThis table describes the configuration of the local controller. SEQUENCE OF HwWlanClusterLocalIPv4Entry .1.3.6.1.4.1.2011.6.139.11.1.83.3 |
hwWlanClusterLocalIPv4EntryThis table has no index. HwWlanClusterLocalIPv4Entry .1.3.6.1.4.1.2011.6.139.11.1.83.3.1 |
hwWlanClusterLocalIPv4AddressThis object indicates the IPv4 address of the local controller. IpAddress .1.3.6.1.4.1.2011.6.139.11.1.83.3.1.1 |
hwWlanClusterLocalIPv4PskThis object indicates the psk of the local controller.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.3.1.2 |
hwWlanClusterLocalIPv4RowStatusThis object indicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.83.3.1.3 |
hwWlanClusterLocalIPv6TableThis table describes the configuration of the local controller. SEQUENCE OF HwWlanClusterLocalIPv6Entry .1.3.6.1.4.1.2011.6.139.11.1.83.4 |
hwWlanClusterLocalIPv6EntryThis table has no index. HwWlanClusterLocalIPv6Entry .1.3.6.1.4.1.2011.6.139.11.1.83.4.1 |
hwWlanClusterLocalIPv6AddressThis object indicates the IPv6 address of the local controller. OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.4.1.1 |
hwWlanClusterLocalIPv6PskThis object indicates the psk of the local controller.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.4.1.2 |
hwWlanClusterLocalIPv6RowStatusThis object indicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.139.11.1.83.4.1.3 |
hwWlanClusterSynConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.1.83.5 |
hwWlanClusterSynIPv4AddressThis object indicates the Ipv4 address of the synchronize-configuration.rw IpAddress .1.3.6.1.4.1.2011.6.139.11.1.83.5.1 |
hwWlanClusterSynIPv6AddressThis object indicates the Ipv6 address of the synchronize-configuration.rw OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.5.2 |
hwWlanClusterACListInfoTableThis table describes the ac information. SEQUENCE OF HwWlanClusterACListInfoEntry .1.3.6.1.4.1.2011.6.139.11.1.83.6 |
hwWlanClusterACListInfoEntryThis table has no index. HwWlanClusterACListInfoEntry .1.3.6.1.4.1.2011.6.139.11.1.83.6.1 |
hwWlanClusterACIndexThis object indicates the index of hwWlanClusterACListInfo. Unsigned32 .1.3.6.1.4.1.2011.6.139.11.1.83.6.1.1 |
hwWlanClusterACIPv4This object indicates the ipv4 address of the ac.ro IpAddress .1.3.6.1.4.1.2011.6.139.11.1.83.6.1.2 |
hwWlanClusterACIPv6This object indicates the ipv6 address of the ac.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.6.1.3 |
hwWlanClusterACRoleThis object indicates the role of the ac.ro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.83.6.1.4 |
hwWlanClusterACTypeThis object indicates the type of the ac.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.6.1.5 |
hwWlanClusterACVersionThis object indicates the version of the ac.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.6.1.6 |
hwWlanClusterACStatusThis object indicates the status of the ac.ro Enumeration .1.3.6.1.4.1.2011.6.139.11.1.83.6.1.7 |
hwWlanClusterACLastSynTimeThis object indicates the last synchronize time of the ac.ro OCTET STRING .1.3.6.1.4.1.2011.6.139.11.1.83.6.1.8 |
hwWlanConfigConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.2 |
hwWlanConfigCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.2.1 |
hwWlanConfigObjectGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.139.11.2.2 |