Home/Catalog/HUAWEI-PORT-MIB

HUAWEI-PORT-MIB

AI MIB Summary

The HUAWEI-PORT-MIB module provides vendor-specific management interfaces for monitoring and configuring Layer 2/3 port statistics, operational states, and error counters on Huawei data communication devices. It enables granular visibility into interface performance metrics such as throughput, packet drops, and link status within the hwDataComm MIB hierarchy.

The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB
Main OID:
hwPortMIB.1.3.6.1.4.1.2011.5.25.157
844
Objects
Active
Status
7
Dependencies

Imported Objects

P-BRIDGE-MIB
IF-MIB
HUAWEI-IMA-MIB
SNMPv2-SMI
SNMPv2-TC
HUAWEI-MIB
SNMPv2-CONF

Objects

844 total
Object Name
hwPortMIBThe private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB
MODULE-IDENTITY
.1.3.6.1.4.1.2011.5.25.157
hwPortMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1
hwEthernet
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.1
hwEthernetTableIndicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces.
SEQUENCE OF HwEthernetEntry
.1.3.6.1.4.1.2011.5.25.157.1.1.1
hwEthernetEntryIndicates the physical attributes of the Ethernet interface. This table lists the physical attributes of various Ethernet interfaces.
HwEthernetEntry
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1
hwEthernetIfIndexInterface index(es) of port(s) present on the device .
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1
hwEthernetLoopbackThe local loopback of an Ethernet interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default, stopLoopback is used.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11
hwEthernetPortTypeIndicates the type of the Ethernet interface: an optical interface or an electrical interface.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12
hwEthernetSpeedSetIndicates the speed of the Ethernet interface. This parameter takes effect only on some Ethernet electrical interfaces rather than optical interfaces. The parameter can be 10 M, 100 M, 1000 M, 10000 M,40000 M,20000 M,2500 M,5000 M.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13
hwEthernetDuplexIndicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14
hwEthernetNegotiationIndicates the auto-negotiation mode of the Ethernet electrical interface. By default, auto-negotiation is enabled. The three objects, hwEthernetSpeedSet, hwEthernetDuplex, and hwEthernetNegotiation are associated with each other. If the auto-negotiation of hwEthernetNegotiation is enabled, the values of hwEthernetSpeedSet and hwEthernetDuplex are auto-negotiated. If hwEthernetSpeedSet is set to a certain value, hwEthernetDuplex is modified to the default value full, and hwEthernetNegotiation is automatically changed to disable. If the auto-negotiation of hwEthernetNegotiation is enabled, hwEthernetDuplex cannot be set.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15
hwEthernetPortTypeOperateIndicates the link type of the Ethernet interface. The type can be optical link or electrical link. This parameter takes effect only on specific Ethernet interfaces.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16
hwEthernetClockIndicates the mode of the clock. The mode can be master or slave. By default, the mode of a clock is slave. This parameter takes effect only on the WAN board.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20
hwEthernetFlagJ0ModeBefore the 10 GE WAN board processes packets, the overhead byte must be configured on the interface. The overhead byte for the SDH frame, j0: Set section trace byte The default value is j016ByteMode(2):hwEthernetFlagJ0Trace:NetEnginerw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21
hwEthernetFlagJ0Valuej01ByteMode Value. When hwEthernetFlagJ0Mode is set to j01ByteMode, this parameter takes effect.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22
hwEthernetFlagJ0TraceSet section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwEthernetFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23
hwEthernetFlagJ1ModeIndicates the overhead byte of the SDH frame. j1:sets path trace byte. The default value is j116ByteMode(2) hwEthernetFlagJ1Trace NetEngine.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24
hwEthernetFlagJ1Valuej11ByteMode Value. When hwEthernetFlagJ1Mode is set to j11ByteMode, this parameter takes effect.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25
hwEthernetFlagJ1TraceSet path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwEthernetFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwEthernetFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26
hwEthernetFlagC2ValueIndicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27
hwEthernetUpHoldTimeIndicates the response time to the event that the port turns Up. The units of hwEthernetUpHoldTime is millisecond.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31
hwEthernetDownHoldTimeIndicates the response time to the event that the port turns Down. The units of hwEthernetDownHoldTime is millisecond.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32
hwEthernetSubinterfaceStatisticEnableEnable the statistical function of the sub-interface.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33
hwEthernetFlowControlSet flow control of this port.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34
hwEthernetOfflineSet Line protocol state to down of this port.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35
hwEthernetSetTransferModeSet transfer mode of this port.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36
hwEthernetJumboframeMaxLengthSet the jumboframe max length of this port.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37
hwEthernetComboTypecombo mode of this port.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38
hwEthernetPortModeIndicates combo mode of this port.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39
hwEthernetNegotiationModeSet negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40
hwPos
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.2
hwPosTableIndicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface.
SEQUENCE OF HwPosEntry
.1.3.6.1.4.1.2011.5.25.157.1.2.1
hwPosEntryIndicates the physical attributes of the POS interface. This table lists the physical attributes of the POS interface.
HwPosEntry
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1
hwPosIfIndexInterface index(es) of port(s) present on the device .
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.1
hwPosLinkProtocolIndicates the link layer protocol of the POS interface. By default, on a POS interface, PPP serves as the link layer protocol.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.11
hwPosFrameFormatIndicates the frame type of the POS interface. By default, the frame type of the POS interface is SDH. This variable identifies whether a SONET or a SDH signal is used across this interface.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.12
hwPosLoopbackThe local loopback of a POS interface is used to test the interface itself. If an interface works in a normal situation, disable the local loopback. By default, stopLoopback is used.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.13
hwPosScrambleIndicates the scramble function of payload. By default, the scramble function of payload is enabled.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.14
hwPosClockIndicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.15
hwPosCrcVerifyCodeIndicates the length of the CRC verity code. The default value is 32.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.16
hwPosFlagJ0ModeIndicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwPosFlagJ0Trace:NetEngine.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.21
hwPosFlagJ0ValueIndicates the value of j01ByteMode. When hwPosFlagJ0Mode is set to j01ByteMode, hwPosFlagJ0Value takes effect.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.22
hwPosFlagJ0TraceSet section trace byte. When hwPosFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwPosFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace byte. When hwPosFlagJ0Mode is set to j064ByteOrNullMode, the value of this variable is up to 64 characters trace byte.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.23
hwPosFlagJ1ModeIndicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwPosFlagJ1Trace:NetEngine.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.24
hwPosFlagJ1ValueIndicates the value of j11ByteMode. When hwPosFlagJ1Mode is set to j11ByteMode, hwPosFlagJ1Value takes effect.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.25
hwPosFlagJ1TraceSet path trace byte. When hwPosFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwPosFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte. When hwPosFlagJ1Mode is set to j164ByteOrNullMode, this variable is up to 64 characters trace byte.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.26
hwPosFlagC2ValueIndicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 0x02.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.27
hwCpos
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.3
hwCposTableIndicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface.
SEQUENCE OF HwCposEntry
.1.3.6.1.4.1.2011.5.25.157.1.3.1
hwCposEntryIndicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface.
HwCposEntry
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1
hwCposIfIndexInterface index(es) of port(s) present on the device .
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.1
hwCposClockIndicates whether the clock is in master mode or slave mode. By default, the clock is in slave mode.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.11
hwCposIfTypeIndicates the interface type.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.12
hwCposFrameFormatIndicates the frame type of the CPOS interface. By default, the frame type of the CPOS interface is SDH.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.13
hwCposMultiplexIndicates the multiplex mode of the AUG. By default, the multiplex mode of the AUG is au-4.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.14
hwCposLoopbackIndicates the loopback function of the CPOS interface. By default, the loopback function is disabled.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.15
hwCposFlagJ0ModeIndicates the overhead byte of the SDH frame. j0: sets section trace byte. The default value is j016ByteMode(2);hwCposFlagJ0Trace NetEngine.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.21
hwCposFlagJ0Valuej01ByteMode Value . When hwCposFlagJ0Mode is set to j01ByteMode, hwCposFlagJ0Value takes effect.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.22
hwCposFlagJ0TraceSet section trace byte. When hwCposFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwCposFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When hwCposFlagJ0Mode is set to j064ByteOrNullMode, this variable is up to 64 characters trace byte.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.23
hwCposFlagJ1ModeIndicates the overhead byte of the SDH frame. j1: sets path trace byte. The default value is j116ByteMode(2);hwCposFlagJ1Trace NetEngine.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.24
hwCposFlagJ1ValueIndicates the value of j11ByteMode. When hwCposFlagJ1Mode is set to j11ByteMode, hwCposFlagJ1Value takes effect.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.25
hwCposFlagJ1TraceSet path trace byte. When hwCposFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwCposFlagJ1Mode is set to j116ByteMode, this variable is a string up to 15 characters trace byte. When hwCposFlagJ1Mode is set to j164ByteOrNullMode, this variable is a string up to 64 characters trace byte.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.26
hwCposFlagC2ValueIndicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16).rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.27
hwCposB1SdAlarmThresholdThe threshold of B1 threshold crossing alarm.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.28
hwCposB1ExcAlarmThresholdThe threshold of B1 threshold crossing alarm.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.29
hwCposB2SdAlarmThresholdThe threshold of B2 threshold crossing alarm.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.30
hwCposB2ExcAlarmThresholdThe threshold of B2 threshold crossing alarm.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.31
hwCposB3SdAlarmThresholdThe threshold of B3 threshold crossing alarm.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.32
hwCposB3ExcAlarmThresholdThe threshold of B3 threshold crossing alarm.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.33
hwCposLpBipSdAlarmThresholdThe threshold of BIP2 threshold crossing alarm.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.34
hwCposLpBipExcAlarmThresholdThe threshold of BIP2 threshold crossing alarm.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.35
hwCposHighPathNumberIndicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16).ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.36
hwCposLowPathNumberIndicates the overhead byte of the SDH frame. c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16).ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.37
hwCposMappingModeIndicates the mapping mode of cpos port, default if h-mode(1).rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.38
hwCposRxJ0ModeIndicates the received J0 mode.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.39
hwCposRxJ1ModeIndicates the received J1 mode.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.40
hwCposRxJ0ValueIndicates the received J0 value of 1-byte mode.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.41
hwCposRxJ1ValueIndicates the received J1 value of 1-byte mode.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.42
hwCposRxJ0TraceIndicates the received J0 characters of 16-byte or 64-byte mode.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.43
hwCposRxJ1TraceIndicates the received J1 characters of 16-byte or 64-byte mode.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.44
hwCposVc4FlagThe value of this object identifies whether a VC4 channel can be created on the CPOS interface. 0 indicates that no VC4 channel can be created on the CPOS interface. 1 indicates that a VC4 channel can be created but has not been created on the CPOS interface. 2 indicates that a VC4 channel can be created and has been created on the CPOS interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.45
hwPortPhysicalHpIndexIndicates the higher order path number.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.2
hwPortPhysicalLpIndexIndicates the low order path number.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.3
hwCposLpTableDescription.
SEQUENCE OF HwCposLpEntry
.1.3.6.1.4.1.2011.5.25.157.1.3.4
hwCposLpEntryDescription.
HwCposLpEntry
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1
hwCposLpIfIndexDescription.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.1
hwCposLpIdDescription.
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.2
hwCposFlagJ2ModeDescription.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.3
hwCposFlagJ2ValueDescription.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.4
hwCposFlagJ2TraceDescription.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.5
hwCposRxJ2ModeIndicates the received J2 mode.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.6
hwCposRxJ2ValueIndicates the received J2 value of 1-byte mode.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.7
hwCposRxJ2TraceIndicates the received J2 characters of 16-byte or 64-byte mode.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.8
hwDs0ChannelBundle
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.4
hwDs0ChannelBundleTableThis table is used to bundle timeslots of CE1/CT1 interfaces.
SEQUENCE OF HwDs0ChannelBundleEntry
.1.3.6.1.4.1.2011.5.25.157.1.4.1
hwDs0ChannelBundleEntryThis table is used to bundle timeslots of CE1/CT1 interfaces.
HwDs0ChannelBundleEntry
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1
hwDs0ChannelBundleParentIfIndexIndicates the index of the parent interface.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.1
hwDs0ChannelBundleDs1ChannelIdIndicates the channel ID.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.2
hwDs0ChannelBundleIdIndicates the index number of the channel set.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.3
hwDs0ChannelBundleIfIndexIndicates the index of the serial interface formed by the timeslot binding.rw
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.11
hwDs0ChannelBundleTimeSlotsIndicates the number of the range of the timeslot to be bound. The value is an integer ranging from 0 to 31. Multiple timeslots are separated by ','. The range of timeslot is expressed by using '-'. For E1 card mode: If the timeslots are '0-31', it means unframed format, If the timeslots are '0-30', it means framed format, For T1 card mode: If the timeslots are '0-23', it means unframed format, If the timeslots are '0-22', it means framed format, and hwDs0ChannelBundleDs1ChannelId and hwDs0ChannelBundleId should be zero.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.12
hwDs0ChannelBundleSpeedConfigures the mode to configure the timeslots. If the parameter 56 k is selected, the timeslots are bound in the mode of N x 56 kbit/s. If the parameter 64 k is selected, the timeslots are bound in the mode of N x 64 kbit/s. If the parameter 150336 k is selected, the interface is used for remarking the CEP interface. The default value is 64kbit/s.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.13
hwDs0ChannelBundleTimeSlot0Indicates the timeslot0 to be bound or a single channel. The ture value indicates it will be create TDM channel.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.14
hwDs0ChannelBundleIsMasterPWIndicates if the pw configed on this port is master pw.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.15
hwDs0ChannelBundleMasterPWStatusIndicates the status of master pw.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.16
hwDs0ChannelBundlePortNamePort name.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.17
hwDs0ChannelBundleRowStatusThis variable is used to create or delete an object.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.51
hwDs1
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.5
hwDs1TableThis table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces.
SEQUENCE OF HwDs1Entry
.1.3.6.1.4.1.2011.5.25.157.1.5.1
hwDs1EntryThis table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces.
HwDs1Entry
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1
hwDs1ParentIfIndexIndicates the index of the parent interface.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.1
hwDs1ChannelIdIndicates the channel ID.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.2
hwDs1IfIndexIndicates the interface index.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.3
hwDs1ChannelTypeIndicates the interface type. The type can be E1/CE1 or T1/CT1.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.11
hwDs1IfTypeIndicates the interface tyep. e3: is multiplexed by CE3 interfaces. t3: is multiplexed by CT3 interfaces. cpos: is multiplexed by CPOS interfaces. atm: is multiplexed by ATM interfaces. none: indicates the physical interface. default:nonerw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.12
hwDs1ChannelizedIndicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.13
hwDs1CodeTypeIndicates the code type of the interface. ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bipolar with 8-Zero Substitution. none: is not supportedrw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14
hwDs1ClockIndicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.15
hwDs1FrameFormatIndicates the frame format of the interface. crc4: indicates that the frame format is CRC4. no-crc4: indicates that the frame format is no-CRC4. sf: indicates that the frame format is Super Frame. esf: indicates that the frame format is Extended Super Frame. By default, the frame format of an E1 interface is no-crc4. By default, the frame format of a T1 interface is esf.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16
hwDs1CableThe cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.17
hwDs1LoopbackEnable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.18
hwDs1ClockRecoveryDomainIndicates the clock recovery domain of the interface.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.19
hwDs1PWClockDomainIndicates the clock recovery domain of the interface.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.20
hwDs1WorkModeIndicates the clock recovery domain of the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.21
hwDs1EsAlarmTriggerThresholdThe trigger threshold of code violation count threshold crossing alarm of E1 line side .rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.22
hwDs1EsAlarmResumeThresholdThe resume threshold of code violation count threshold crossing alarm of E1 line side .rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.23
hwDs1RowStatusThis variable is used to create or delete an object.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.51
hwDs1LboThe lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 timesrw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.52
hwDs1CableLengthThe cableLength of T1 port. Unit: feet.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.53
hwDs3
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.6
hwDs3TableThis table lists all E3/CE3 interfaces or all T3/CT3 interfaces.
SEQUENCE OF HwDs3Entry
.1.3.6.1.4.1.2011.5.25.157.1.6.1
hwDs3EntryThis table lists all E3/CE3 interfaces or all T3/CT3 interfaces.
HwDs3Entry
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1
hwDs3ParentIfIndexIndicates the index of the parent interface.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.1
hwDs3ChannelIdIndicates the index of the parent interface.
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.2
hwDs3IfIndexIndicates the interface index.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.3
hwDs3ChannelTypeIndicates the interface type. The type can be E3/CE3 or T3/CT3.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.11
hwDs3IfTypeIndicates the parent interface type of the interface. cpos: is multiplexed by CPOS interfaces. none: indicates the interface is a physical interface. The default is none.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.12
hwDs3ChannelizedIndicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.13
hwDs3ClockIndicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.14
hwDs3FrameFormatIndicates the frame format of the interface.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.15
hwDs3ScrambleIndicates the scramble function of the interface. true: enables the scramble function. false: disables the scramble function. The default is false.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.16
hwDs3CableThe cable command takes effect only if the E3 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.17
hwDs3NationalBitIndicates the national bit of the E3/CE3 interface. n0: indicates the national bit is 0 and the interface supports only the communication within a country. n1: indicates the national bit is 1 and the interface supports the international communication.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.18
hwDs3LoopbackEnable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cell: enables the local cell loopback. The local cell loopback is used to test the local physical chip.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.19
hwDs3CreateSerialCreate serial interface from Ds3 interface. True create serial interface. False destroy serial interface.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.20
hwDs3RowStatusThis variable is used to create or delete an object.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.51
hwBundleSerial
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.7
hwBundleSerialTableIndicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface.
SEQUENCE OF HwBundleSerialEntry
.1.3.6.1.4.1.2011.5.25.157.1.7.1
hwBundleSerialEntryIndicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface.
HwBundleSerialEntry
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1
hwBundleSerialIfIndexInterface index(es) of serial(s) present on the device .
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.1
hwBundleSerialLinkProtocolThe link-protocol of interface. The serial(s) always use PPP as its link-protocol for default.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.11
hwBundleSerialTimerHoldIndicates the interval for sending Keepalive packets from the serial interface to the peer. The default is 10 seconds.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.12
hwBundleSerialLoopbacktrue: enables the loopback on the serial interface. false: disables the loopback on the serial interface. By default, the loopback on the serial interface is disabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.13
hwBundleSerialCrcVerifyCodeIndicates the length of the CRC verify code. The default is 32.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.14
hwPhysicalPort
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.8
hwPhysicalPortTableIndicates the attribute of the physical port.
SEQUENCE OF HwPhysicalPortEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.1
hwPhysicalPortEntryIndicates the attribute of the physical port.
HwPhysicalPortEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1
hwPhysicalPortIfIndexInterface index(es) of physical port(s) present on the device .ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1
hwPhysicalPortDelayTimeIndicates the port tx enabling delay time. The units of hwPhysicalPortDelayTime is millisecond. The default value is 0 ms.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2
hwPhysicalPortDelayRemainTimeIndicates the remnant time of enabling port-tx. The units of hwPhysicalPortDelayTime is millisecond.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3
hwPhysicalPortNameIndicates the physical port name.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4
hwPhysicalPortInChassisIndicates the physical port in chassis.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5
hwPhysicalPortInSlotIndicates the SlotID.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6
hwPhysicalPortInCardIndicates the CardID.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7
hwPhysicalPortInPortIndicates the PortID.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8
hwPhysicalAutoShutLaserEnableIndicates enable or disable the laser auto shut . Default is disable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9
hwPhysicalAutoShutLaserOpenIntervalIndicates the open interval of laser auto shut . The default value is 200 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut.rw
Integer32 (100..300 | 2147483647)
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10
hwPhysicalAutoShutLaserCloseIntervalIndicates the close interval of laser auto shut . The default value is 6000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut.rw
Integer32 (200..30000 | 2147483647)
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11
hwPhysicalAutoShutLaserLongOpenIntervalIndicates the long open interval of laser auto shut . The default value is 9000 (unit: 10 ms). The value 2147483647 means that the interface doesn't support laser auto shut.rw
Integer32 (200..30000 | 2147483647)
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12
hwPhysicalLoopbackTypeThe current state of loopbackType in port.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13
hwPhysicalShutLaserTurn on or turn off the laser.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14
hwPhysicalLaserStatusThe current status of the laser.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15
hwPhysicalPortHoldUpIndicates enable or disable the interface to remain Up , the default value is disable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16
hwPhysicalPortAlarmInverseEnableConfig port alarm inverse enable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17
hwPhysicalPortInVsIdVsId.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.18
hwPhysicalPortAlarmNameIndicates the physical port alarm name.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.19
hwSDHRsMsPerfCurrentTableIndicates the performance stat of the Regenerator Section.
SEQUENCE OF HwSDHRsMsPerfCurrentEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.2
hwSDHRsMsPerfCurrentEntryIndicates the performance stat of the Regenerator Section.
HwSDHRsMsPerfCurrentEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1
hwSDHRsMsPerfCurrentIfIndexInterface index(es) of port(s) present on the device .
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.1
hwSDHRsMsPerfCurrentDataIndexData index(es) of port(s) present on the device .
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.2
hwSDHRsPerfCurrentBBERegenerator Section Background Block Error.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.3
hwSDHRsPerfCurrentESRegenerator Section Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.4
hwSDHRsPerfCurrentSESRegenerator Section Severely Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.5
hwSDHRsPerfCurrentUASRegenerator section unavailable second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.6
hwSDHMsPerfCurrentBBEMultiplex Section Background Block Error.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.7
hwSDHMsPerfCurrentESMultiplex Section Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.8
hwSDHMsPerfCurrentSESMultiplex Section Severely Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.9
hwSDHMsPerfCurrentUASMultiplex Section Unavaliable Seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.10
hwSDHMsPerfCurrentFEBBEMultiplex Section Far end Background Block Error.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.11
hwSDHMsPerfCurrentFEESMultiplex Section Far end Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.12
hwSDHMsPerfCurrentFESESMultiplex Section Far end Severely Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.13
hwSDHMsPerfCurrentFEUASMultiplex Section Far end Unavaliable Seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.14
hwSDHHpPerfCurrentTableIndicates the performance stat of the Higher order Path.
SEQUENCE OF HwSDHHpPerfCurrentEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.3
hwSDHHpPerfCurrentEntryIndicates the performance stat of the Higher order Path.
HwSDHHpPerfCurrentEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1
hwSDHHpPerfCurrentIfIndexInterface index(es) of port(s) present on the device .ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.1
hwSDHHpPerfCurrentHpIndexHigher order Path index(es) of port(s) present on the device .
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.2
hwSDHHpPerfCurrentDataIndexData index(es) of port(s) present on the device .
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.3
hwSDHHpPerfCurrentBBEMultiplex Section Far end Unavaliable Seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.4
hwSDHHpPerfCurrentESHigher order Path Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.5
hwSDHHpPerfCurrentSESHigher order Path Severely Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.6
hwSDHHpPerfCurrentUASHigher order Path Unavaliable Seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.7
hwSDHHpPerfCurrentFEBBEHigher order Path Far end Background Block Error.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.8
hwSDHHpPerfCurrentFEESHigher order Path Far end Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.9
hwSDHHpPerfCurrentFESESHigher order Path Far end Severely Errored Second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.10
hwSDHHpPerfCurrentFEUASHigher order Path Far end Unavaliable Seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.11
hwSDHLpPerfCurrentTableIndicates the performance stat of the Low order Path.
SEQUENCE OF HwSDHLpPerfCurrentEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.4
hwSDHLpPerfCurrentEntryIndicates the performance stat of the Low order Path.
HwSDHLpPerfCurrentEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1
hwSDHLpPerfCurrentIfIndexInterface index(es) of port(s) present on the device .ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.1
hwSDHLpPerfCurrentHpIndexHigher order Path index(es) of port(s) present on the device .
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.2
hwSDHLpPerfCurrentLpIndexLow order Path index(es) of port(s) present on the device .
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.3
hwSDHLpPerfCurrentDataIndexData index(es) of port(s) present on the device .
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.4
hwSDHLpPerfCurrentBBELow order Path Background Block Error.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.5
hwSDHLpPerfCurrentESLow order Path errored seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.6
hwSDHLpPerfCurrentSESLow order Path severely errored seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.7
hwSDHLpPerfCurrentUASLow order Path Unavailable second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.8
hwSDHLpPerfCurrentFEBBELow order Path Far-end Background Block Error.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.9
hwSDHLpPerfCurrentFEESLow order Path Far-end errored seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.10
hwSDHLpPerfCurrentFESESLow order Path Far-end severely errored seconds.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.11
hwSDHLpPerfCurrentFEUASLow order Path Far-end Unavailable second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.12
hwPDHPerfCurrentTableIndicates the performance stat of the E1 line side.
SEQUENCE OF HwPDHPerfCurrentEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.5
hwPDHPerfCurrentEntryIndicates the performance stat of the E1 line side.
HwPDHPerfCurrentEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1
hwPDHPerfCurrentIfIndexInterface index(es) of port(s) present on the device.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.1
hwPDHPerfCurrentDataIndexData index(es) of port(s) present on the device.
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.2
hwPDHPerfCurrentBBELow order Path Background Block Error.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.3
hwPDHPerfCurrentESE1 line side code violation errored second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.4
hwPDHPerfCurrentSESE1 line side code violation severely errored second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.5
hwPDHPerfCurrentUASE1 line side code violation loss-of-signal second.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.6
hwPDHPerfCurrentLCVE1 line side code violation count.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.7
hwEthPortStatTableIndicates the stat of the ethernet interface.
SEQUENCE OF HwEthPortStatEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.6
hwEthPortStatEntryIndicates the stat of the ethernet interface.
HwEthPortStatEntry
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1
hwEthPortStatIfIndexInterface index(es) of port(s) present on the device.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.1
hwEthPortStatBadBytesIndicates the stat of badbytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.2
hwEthPortStatOutPut64BytesThe total number of packets (including bad packets) output that were 64 octets in length (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.3
hwEthPortStatOutPut65to127BytesThe total number of packets (including bad packets) output that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.4
hwEthPortStatOutPut128to255BytesThe total number of packets (including bad packets) output that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.5
hwEthPortStatOutPut256to511BytesThe total number of packets (including bad packets) output that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)..ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.6
hwEthPortStatOutPut512to1023BytesThe total number of packets (including bad packets) output that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.7
hwEthPortStatOutPut1024to1518BytesThe total number of packets (including bad packets) output that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.8
hwEthPortStatOutPut1519toMaxBytesThe total number of packets (including bad packets) output that were between 1519 and max length octets in length inclusive (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.9
hwPhysicalPortGlobleCfg
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.8.7
hwLoopBackAutoClearEnableset loopback autoclear status enable(1) disable(2).rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.8.7.1
hwLoopBackAutoClearPeriodset loopback autoclear period, unit minute,value range<1-2880> default<5 minute>.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.8.7.2
hwPortAlarmInverseEnableConfig globle alarm inverse enable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.8.7.3
hwDslGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.9
hwDslGroupTableIndicates the attributes of the dsl group.
SEQUENCE OF HwDslGroupEntry
.1.3.6.1.4.1.2011.5.25.157.1.9.1
hwDslGroupEntryAn entry in the dsl group table.
HwDslGroupEntry
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1
hwDslGroupIfIndexInterface index(es) of dsl group present on the device.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.1
hwDslGroupWorkModeThe dsl group of SHD4 card can work in efm or atm mode. Default is efm.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.2
hwDslGroupBisStateBis can be enabled or disabled in ATM mode of SHD4 card.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.3
hwDslGroupEncapeModeThe dsl group of AVD8 card can work in ETHoA-LLC mode or ETHoA-VCMUX mode. Default is ETHoA-LLC.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.4
hwDslGroupEnableTrigger the operation of binding dsl link(s) to the dsl group.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.5
hwDslGroupRowStatusAn object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.60
hwDslGroupBoundVeTableIndicates the attributes of the dsl group bound virtual-ethernet.
SEQUENCE OF HwDslGroupBoundVeEntry
.1.3.6.1.4.1.2011.5.25.157.1.9.2
hwDslGroupBoundVeEntryAn entry in the dsl group bound vitrual-ethernet table.
HwDslGroupBoundVeEntry
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1
hwDslGroupIfIndexOfBoundInterface index(es) of dsl group present on the device.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.1
hwVirtualEthernetIfIndexThe first virtual ethernet interface which the dsl group is bound to.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.2
hwDslGroupVpiVPI value of the 1st PVC pair.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.3
hwDslGroupVciVCI value of the 1st PVC pair.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.4
hwDslGroupPvcIdIdentifier for VPI/VCI Pair.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.5
hwBoundVeRowStatusAn object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified.rwobsolete
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.50
hwDslGroupBindVeTableIndicates the relation of the dsl group binding virtual-ethernet.
SEQUENCE OF HwDslGroupBindVeEntry
.1.3.6.1.4.1.2011.5.25.157.1.9.3
hwDslGroupBindVeEntryAn entry in the dsl group binding vitrual-ethernet table.
HwDslGroupBindVeEntry
.1.3.6.1.4.1.2011.5.25.157.1.9.3.1
hwDslGroupInterfaceIndexInterface index(es) of the dsl group present on the device.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.9.3.1.1
hwVirtualEthernetInterfaceIndexThe virtual ethernet interface index which the dsl group is bound to.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.9.3.1.2
hwBindVeRowStatusAn object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.9.3.1.50
hwDslGroupIma
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.10
hwDslGroupImaTableIndicates the attributes of the dsl ima group.
SEQUENCE OF HwDslGroupImaEntry
.1.3.6.1.4.1.2011.5.25.157.1.10.1
hwDslGroupImaEntryAn entry of the dsl ima group table.
HwDslGroupImaEntry
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1
hwDslGroupImaIfIndexInterface index(es) of dsl group present on the device.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.1
hwDslGroupImaVersionVersion of the ima group of SHD4I card. v0: ima protocol version 1.0; v1: ima protocol version 1.1.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.2
hwDslGroupImaFrameLenFrame length of the ima group of SHD4I card. If ima protocol version is 1.0, the frame length is only 128.rw
ImaFrameLength (HUAWEI-IMA-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.3
hwDslGroupImaResetima group reset for SHD4I card.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.4
hwDslGroupImaTxMinLinkNumMinimum active links number by TX direction.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.5
hwDslGroupImaRxMinLinkNumMinimum active links number by RX direction.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.6
hwDslGroupImaNeStateThe current state of the near-end ima group.ro
ImaGroupState (HUAWEI-IMA-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.7
hwDslGroupImaFeStateThe current state of the far-end ima group.ro
ImaGroupState (HUAWEI-IMA-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.8
hwDslGroupImaTxCellRateThe current cell rate of ima group by TX direction.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.9
hwDslGroupImaRxCellRateThe current cell rate of ima group by RX direction.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.10
hwDslGroupImaTxActLinkNumNumber of active links by TX direction.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.11
hwDslGroupImaRxActLinkNumNumber of active links by RX direction.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.12
hwDslGroupImaIfNameThe interface name of ima group.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.13
hwDslLinkTableIndicates the dsl link bound relation.
SEQUENCE OF HwDslLinkEntry
.1.3.6.1.4.1.2011.5.25.157.1.11.1
hwDslLinkEntryAn entry of the dsl link bound relation.
HwDslLinkEntry
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1
hwBoundDslGroupIfIndexInterface index of dsl group which the dsl link bound to.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1.1
hwDslLinkIfIndexInterface index of the dsl link device.rw
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1.2
hwDslLinkIfNameThe interface name of the dsl link.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1.4
hwBoundDslGroupIfNameInterface index of dsl group which the dsl link bound to.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1.5
hwDslLinkBoundRowStatusAn object that allows entries in this table to be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be rejected with an SNMP error (e.g., inconsistentValue). In order to perform a SET operation to any other attribute in this table the manager MUST set this object to notInService (2). After setting the object back to 'active' the implementation MAY tear down all the sessions that belong to this partition and recreate them, depending on what session attributes have been modified.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1.50
hwPWAlarm
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.12
hwPWAlarmTableIndicates the attributes of the PW alarm.
SEQUENCE OF HwPWAlarmEntry
.1.3.6.1.4.1.2011.5.25.157.1.12.1
hwPWAlarmEntryAn entry of the PW alarm relation.
HwPWAlarmEntry
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1
hwPWAlarmIfIndexInterface index of PW alarm group.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.1
hwPWCesVcIDVc ID of PW alarm group.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.2
hwPWCesVcTypeVc Type of PW alarm group.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.3
hwPeerIpAddrPeer IP Address of PW alarm group.ro
IpAddress
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.4
hwAlarmStatusAlarm status of PW alarm group.roobsolete
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.5
hwPWAlarmRMLEnableStatusPW control word RML of PW alarm group.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.6
hwLosAlarmTriggerThresholdTrigger Threshold of continuous loss packets of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.7
hwLosAlarmResumeThresholdResume Threshold of continuous loss packets of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.8
hwPWPortNamePW port name of PW alarm group.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.9
hwLosPktExcTriggerThresholdTrigger threshold of lost packets of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.10
hwLosPktExcResumeThresholdResume threshold of lost packets of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.11
hwMisorderPktExcTriggerThresholdTrigger threshold of packets lost due to the out-of-order condition of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.12
hwMisorderPktExcResumeThresholdResume threshold of packets lost due to the out-of-order condition of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.13
hwStrayPktExcTriggerThresholdTrigger threshold of misconnected packets of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.14
hwStrayPktExcResumeThresholdResume threshold of misconnected packets of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.15
hwMalPktExcTriggerThresholdTrigger threshold of malformed packets of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.16
hwMalPktExcResumeThresholdResume threshold of malformed packets of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.17
hwJtrUdrExcTriggerThresholdTrigger threshold of jitter buffer underflows of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.18
hwJtrUdrExcResumeThresholdResume threshold of jitter buffer underflows of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.19
hwJtrOvrExcTriggerThresholdTrigger threshold of jitter buffer overflows of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.20
hwJtrOvrExcResumeThresholdResume threshold of jitter buffer overflows of PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.21
hwAtmPWAlarmTableIndicates the attributes of the ATM PW alarm.
SEQUENCE OF HwAtmPWAlarmEntry
.1.3.6.1.4.1.2011.5.25.157.1.12.2
hwAtmPWAlarmEntryAn entry of the ATM PW alarm relation.
HwAtmPWAlarmEntry
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1
hwAtmPWAlarmIfIndexInterface index of ATM PW alarm group.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.1
hwAtmVcIDVc ID of ATM PW alarm group.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.2
hwAtmVcTypeVc Type of ATM PW alarm group.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.3
hwAtmPeerIpAddrPeer IP Address of ATM PW alarm group.ro
IpAddress
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.4
hwAtmPWPortNameATM PW port name of PW alarm group.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.5
hwAtmLosPktExcTriggerThresholdTrigger threshold of lost packets of ATM PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.6
hwAtmLosPktExcResumeThresholdResume threshold of lost packets of ATM PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.7
hwAtmMisorderPktExcTriggerThresholdTrigger threshold of packets lost due to the out-of-order condition of ATM PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.8
hwAtmMisorderPktExcResumeThresholdResume threshold of packets lost due to the out-of-order condition of ATM PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.9
hwAtmUnknownCellExcTriggerThresholdTrigger threshold of unknown cell of ATM PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.10
hwAtmUnknownCellExcResumeThresholdResume threshold of unknown cell of ATM PW alarm group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.11
hwSNMPTrapEn
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.13
hwSNMPTrapEnTableReserved nodes do not support this function temporarily.
SEQUENCE OF HwSNMPTrapEnEntry
.1.3.6.1.4.1.2011.5.25.157.1.13.1
hwSNMPTrapEnEntryReserved nodes do not support this function temporarily.
HwSNMPTrapEnEntry
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1
hwSNMPTrapEnIfIndexReserved nodes do not support this function temporarily.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.1
hwCesPWLopsEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.2
hwCesPWRemoteLosPktEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.3
hwCesPWOppositeRAIEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.4
hwCesPWOppositeAcfaultEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.5
hwCesPWLosPktEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.6
hwCesPWMisorderPktEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.7
hwCesPWStrayPktEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.8
hwCesPWMalPktEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.9
hwCesPWJtrUnrEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.10
hwCesPWJtrOvrEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.11
hwCesPWAllEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.12
hwPhysicalPortLosAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.13
hwPhysicalPortLofAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.14
hwRsOofAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.15
hwRsB1ExcAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.16
hwRsB1SdAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.17
hwRsJ0TimAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.18
hwMsRdiAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.19
hwMsB2ExcAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.20
hwMsAuLopAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.21
hwMsAisAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.22
hwMsB2SdAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.23
hwHpJ1TimAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.24
hwHpUneqAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.25
hwHpRdiAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.26
hwHpB3ExcAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.27
hwHpPlmAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.28
hwHpB3SdAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.29
hwHpAuAisAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.30
hwLpTuLopAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.31
hwHpTuLomAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.32
hwLpTimAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.33
hwLpUneqAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.34
hwLpRdiAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.35
hwLpBipExcAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.36
hwLpBipSdAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.37
hwLpPlmAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.38
hwLpTuAisAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.39
hwDs1EsExcAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.40
hwDs1RmfaAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.41
hwDs1LmfaAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.42
hwDs1AisAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.43
hwDs1RdiAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.44
hwRsLocAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.45
hwLpRfiAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.46
hwLpV5VcaisAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.47
hwVc12oofAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.48
hwVc12AlmE1RaiAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.49
hwVc12LfaAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.50
hwVc12UpE1AisAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.51
hwVc12DownE1AisAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.52
hwDs1DownE1AisAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.53
hwMsLpsUniBiMAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.54
hwMsK1K2MAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.55
hwMsK2MAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.56
hwVc12LmfaAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.57
hwSDHAllEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.58
hwLaserShutAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.59
hwLaserAutoShutAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.60
hwLaserAllEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.61
hwLoopbackAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.62
hwChannelLoopbackAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.63
hwLoopbackAllEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.64
hwAtmOcdAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.65
hwAtmLcdAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.66
hwAtmUhcsAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.67
hwAtmChcsAlarmEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.68
hwAtmPWLosPktEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.69
hwAtmPWMisorderPktEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.70
hwAtmPWUnknownCellEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.71
hwAtmAllEnReserved nodes do not support this function temporarily.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.72
hwPortAlarmThreshold
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.14
hwPortAlarmThresholdTableIndicates the port alarm threshold. This table lists the port alarm threshold of various interfaces.
SEQUENCE OF HwPortAlarmThresholdEntry
.1.3.6.1.4.1.2011.5.25.157.1.14.1
hwPortAlarmThresholdEntryIndicates the port alarm threshold. This table lists the threshold of various port alarm.
HwPortAlarmThresholdEntry
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1
hwPhysicalPortThrIfIndexInterface index(es) of physical port(s) present on the device.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1
hwPhysicalPortThrNameInterface name of physical port(s) present on the device.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2
hwPhysicalPortCrcErrorStatisticsCrc error statistics value.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.3
hwPhysicalPortCrcErrorHighThresholdCrc error alarm high threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.4
hwPhysicalPortCrcErrorLowThresholdCrc error alarm low threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.5
hwPhysicalPortCrcErrorIntervalCrc error alarm interval time(unit is second),default value is 10s.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.6
hwPhysicalPortSymbolErrorStatisticsSymbol error statistics value.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.7
hwPhysicalPortSymbolErrorHighThresholdSymbol error alarm high threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.8
hwPhysicalPortSymbolErrorLowThresholdSymbol error alarm low threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.9
hwPhysicalPortSymbolErrorIntervalSymbol error alarm interval time(unit is second),default value is 10s.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.10
hwPhysicalPortInputErrorStatisticsInput error statistics value.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.11
hwPhysicalPortInputErrorHighThresholdInput error alarm high threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.12
hwPhysicalPortInputErrorLowThresholdInput error alarm low threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.13
hwPhysicalPortInputErrorIntervalInput error alarm interval time(unit is second),default value is 10s.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.14
hwPhysicalPortOutputErrorStatisticsOutput error statistics value.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.15
hwPhysicalPortOutputErrorHighThresholdOutput error alarm high threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.16
hwPhysicalPortOutputErrorLowThresholdOutput error alarm low threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.17
hwPhysicalPortOutputErrorIntervalOutput error alarm interval time(unit is second),default value is 10s.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.18
hwPhysicalPortSdhErrorStatisticsSdh error statistics value.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.19
hwPhysicalPortSdhErrorHighThresholdSdh error alarm high threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.20
hwPhysicalPortSdhErrorLowThresholdSdh error alarm low threshold,default value is 3.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.21
hwPhysicalPortSdhErrorIntervalSdh error alarm interval time(unit is second),default value is 10s.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.22
hwPhysicalPortBIP8SDErrorThresholdBIP8-SD error alarm threshold,default value is 6.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.23
hwPhysicalPortCrcPerAlarmThresholdCoefficientThe coefficient value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.24
hwPhysicalPortCrcPerAlarmThresholdPowerThe power value of CRC-PER(Packet Error Ratio) alarm threshold. The range is 1 to 7.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.25
hwPhysicalPortCrcPerResumeThresholdCoefficientThe coefficient value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.26
hwPhysicalPortCrcPerResumeThresholdPowerThe power value of CRC-PER(Packet Error Ratio) resume threshold. The range is 1 to 7.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.27
hwPhysicalPortCrcPerTriggerLspEnable or disable the CRC-PER(Packet Error Ratio) result in switchover. The range is 0 to 2. The value 0 means switchover is disabled; 1 means only the lsp switchover is enabled; 2 means only the section switchover is enabled.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.28
hwPhysicalPortCrcPerCurrentValueStringThe current value of CRC-PER(Packet Error Ratio).ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.29
hwPhysicalPortCrcPerAlarmThresholdStringThe alarm threshold of CRC-PER(Packet Error Ratio).ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.30
hwPhysicalPortCrcPerResumeThresholdStringThe resume threshold of CRC-PER(Packet Error Ratio).ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.31
hwPhysicalPortCrcPerTriggerSectionThe trigger section of CRC-PER(Packet Error Ratio).rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.32
hwPhysicalPortAlarmTypeThresholdCoefficientThe value 0 means high-low packet error is enabled; 1 means CRC-PER(Packet Error Ratio) is enabled; 2 means CRC-BER(Bit Error Ratio) is enabled.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.33
hwPhysicalPortCrcSdAlarmThresholdCoefficientThe coefficient value of MAC_FCS_SD alarm threshold. The range is 1 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.34
hwPhysicalPortCrcSdAlarmThresholdPowerThe power value of MAC_FCS_SD alarm threshold. The range is 5 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.35
hwPhysicalPortCrcSdResumeThresholdCoefficientThe coefficient value of MAC_FCS_SD resume threshold. The range is 1 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.36
hwPhysicalPortCrcSdResumeThresholdPowerThe power value of MAC_FCS_SD resume threshold. The range is 5 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.37
hwPhysicalPortCrcExcAlarmThresholdCoefficientThe coefficient value of MAC_FCS_EXC alarm threshold. The range is 1 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.38
hwPhysicalPortCrcExcAlarmThresholdPowerThe power value of MAC_FCS_EXC alarm threshold. The range is 2 to 5.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.39
hwPhysicalPortCrcExcResumeThresholdCoefficientThe coefficient value of MAC_FCS_EXC resume threshold. The range is 1 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.40
hwPhysicalPortCrcExcResumeThresholdPowerThe power value of MAC_FCS_EXC resume threshold. The range is 2 to 5.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.41
hwPhysicalPortCrcSdAlarmThresholdStringThe alarm threshold of MAC_FCS_SD.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.42
hwPhysicalPortCrcSdResumeThresholdStringThe resume threshold of MAC_FCS_SD.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.43
hwPhysicalPortCrcExcAlarmThresholdStringThe alarm threshold of MAC_FCS_EXC.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.44
hwPhysicalPortCrcExcResumeThresholdStringThe resume threshold of MAC_FCS_EXC.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.45
hwPhysicalPortCrcPerAlarmCoefficientStatisticsThe coefficient value of CRC-PER(Packet Error Ratio) alarm statistics.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.46
hwPhysicalPortCrcPerAlarmPowerStatisticsThe power value of CRC-PER(Packet Error Ratio) alarm statistics.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.47
hwPhysicalPortCrcSdAlarmTriggerLspEnable or disable the SD alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.48
hwPhysicalPortCrcExcAlarmTriggerLspEnable or disable the EXC alarm result in switchover. The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.49
hwPhysicalPortCrcPerWarningThresholdCoefficientThe coefficient value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.50
hwPhysicalPortCrcPerWarningThresholdPowerThe power value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 7.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.51
hwPhysicalPortCrcPerWarningResumeThresholdCoefficientThe coefficient value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 9.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.52
hwPhysicalPortCrcPerWarningResumeThresholdPowerThe power value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 7.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.53
hwPhysicalPortCrcPerWarningThresholdStringThe warning threshold of CRC-PER(Packet Error Ratio).ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.54
hwPhysicalPortCrcPerWarningResumeThresholdStringThe warning resume threshold of CRC-PER(Packet Error Ratio).ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.55
hwPhysicalPortPreFecCoefficientStatisticsThe coefficient value of PRE-FEC bit-error-ratio statistics.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.56
hwPhysicalPortPreFecPowerStatisticsThe power value of PRE-FEC bit-error-ratio statistics.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.57
hwPortAlarmDownEnable
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.15
hwPortAlarmDownEnableTableEnalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm.
SEQUENCE OF HwPortAlarmDownEnableEntry
.1.3.6.1.4.1.2011.5.25.157.1.15.1
hwPortAlarmDownEnableEntryEnalbe or disable the port alarm result in physics down. This table lists the enable status of various port alarm.
HwPortAlarmDownEnableEntry
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1
hwPhysicalPortDownIfIndexInterface index(es) of physical port(s) present on the device.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.1
hwPhysicalPortDownNameInterface name of physical port(s) present on the device.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.2
hwPhysicalPortCrcEnabledDownEnalbe or disable the crc error alarm result in physics down, and the default value is disable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.3
hwPhysicalPortSymbolEnabledDownEnalbe or disable the symbol error alarm result in physics down, and the default value is disable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.4
hwPhysicalPortInputEnabledDownEnalbe or disable the input error alarm result in physics down, and the default value is disable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.5
hwPhysicalPortOutputEnabledDownEnalbe or disable the output error alarm result in physics down, and the default value is disable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.6
hwPhysicalPortSdhEnabledDownEnalbe or disable the sdh error alarm result in physics down, and the default value is disable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.7
hwPhysicalPortBip8SdEnabledDownEnalbe or disable the BIP8-SD error alarm result in physics down, and the default value is disable.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.8
hwPortProtectGroupCfg
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.16
hwPortProtectGroupCfgTableThe table includes the information of the port protect group configuration information, and include the port group, working status of port etc.
SEQUENCE OF HwPortProtectGroupCfgEntry
.1.3.6.1.4.1.2011.5.25.157.1.16.1
hwPortProtectGroupCfgEntryThe table includes the information of the port protect group configuration information. The index of the table is hwPortProtectGroupId.
HwPortProtectGroupCfgEntry
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1
hwPortProtectGroupIdPort protect group index.
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.1
hwPortProtectMasterIfIndexThe master interface index of port protect group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.2
hwPortProtectMasterStatusWorking status of master port , include work, protect, down. work: the port in group is active. protect: master port is protect port. down: master port is inactive.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.3
hwPortProtectSlaveIfIndexThe slave interface index of port protect group.rw
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.4
hwPortProtectSlaveStatusWorking status of slave port , include work, protect, down. work: the port in group is active. protect: slave port is protect port. down: slave port is inactive.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.5
hwPortProtectRowStatusStatus of port protect group row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.6
hwPortLine
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.17
hwPortLineTableIndicates the link attributes of the interface. This table lists the link attributes of the interface.
SEQUENCE OF HwPortLineEntry
.1.3.6.1.4.1.2011.5.25.157.1.17.1
hwPortLineEntryIndicates the link attributes of the interface. This table lists the link attributes of the interface.
HwPortLineEntry
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1
hwPortLineIfIndexInterface index(es) of port(s) present on the device .
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.1
hwPortLineUpStreampboIndicates the upstream power back-off of the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.2
hwPortLineDownStreampboIndicates the downstream power back-off of the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.3
hwPortLineUpStreamLoopAttenIndicates the upstream loopback attenuation of the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.4
hwPortLineDownStreamLoopAttenIndicates the downstream loopback attenuation of the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.5
hwPortLineUpStreamSnrMarginIndicates the upstream SNR margin of the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.6
hwPortLineDownStreamSnrMarginIndicates the downstream SNR margin of the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.7
hwPortLineSpeedIndicates the negotiated rate of the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.8
hwPortIfStatistics
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.18
hwPortIfStatTableThis table lists the number of packets of the interface.
SEQUENCE OF HwPortIfStatEntry
.1.3.6.1.4.1.2011.5.25.157.1.18.1
hwPortIfStatEntryThis table lists the number of packets of the interface.
HwPortIfStatEntry
.1.3.6.1.4.1.2011.5.25.157.1.18.1.1
hwPortIfStatIfIndexInterface index(es) of port(s) present on the device .
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.18.1.1.1
hwPortIfStatIfInCrcPktsIndicates the number of packets which the CRC operates.ro
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.18.1.1.2
hwPortDescription
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.19
hwPortDescriptionTableThis table lists the description of interfaces.
SEQUENCE OF HwPortDescriptionEntry
.1.3.6.1.4.1.2011.5.25.157.1.19.1
hwPortDescriptionEntryThis table lists the description of interfaces.
HwPortDescriptionEntry
.1.3.6.1.4.1.2011.5.25.157.1.19.1.1
hwPortDescriptionIfIndexInterface index(es) of port(s) present on the device.
Integer32
.1.3.6.1.4.1.2011.5.25.157.1.19.1.1.1
hwPortDescriptionIfPortDescriptionIndicates the description of ports.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.19.1.1.2
hwPRBSTestInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.20
hwPRBSTestPortStatusTableThis table lists the capability and result of PRBS test.
SEQUENCE OF HwPRBSTestPortStatusEntry
.1.3.6.1.4.1.2011.5.25.157.1.20.1
hwPRBSTestPortStatusEntryThis table lists the capability and result of PRBS test.
HwPRBSTestPortStatusEntry
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1
hwPRBSTestPortStatusIfNameInterface name of port(s) present on the device.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.1
hwPRBSTestPortStatusSideIndicate PRBS test side.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.2
hwPRBSTestPortStatusSuportFlagWhether PRBS test supported.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.3
hwPRBSTestPortStatusPatternBitmapIndicate supported PRBS pattern by bitmap. bit 0 - 3 : PRBS15, PRBS20, PRBS23, QRSS, bit 4 - 7 : 0S, 1S, ALT-0-1, 1IN8, bit 8 - 11 : 3IN24, PRBS6, PRBS9, PRBS11, bit 12 : QRWro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.4
hwPRBSTestPortStatusErrInsertLevelIndicate the supported err-insert level. It's described by bitmap. From low to high, the different bit position indicates whether or not support 1, 1e-1, 1e-2, 1e-3, etc. e.g. 0x1FC (0b111111100): Range from 1e-2 to 1e-8 supported. 0xA (0b1010) : Only 1e-1 and 1e-3 supported.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.5
hwPRBSTestPortStatusSlotNumSlot ID of the testing phyicial port.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.6
hwPRBSTestPortStatusCardNumCard ID of the testing phyicial port.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.7
hwPRBSTestPortStatusPhyPortIfNameInterface Name of the testing phyicial port.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.8
hwPRBSTestPortStatusResultCountTotal count of PRBS test history result.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.9
hwPRBSTestPortStatusOngoingTestIndexIndicate the ongoing PRBS testing index of current interface.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.10
hwPRBSTestResultTableThis table lists PRBS test result info.
SEQUENCE OF HwPRBSTestResultEntry
.1.3.6.1.4.1.2011.5.25.157.1.20.2
hwPRBSTestResultEntryThis table lists PRBS test result info.
HwPRBSTestResultEntry
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1
hwPRBSTestResultIfNameInterface name of port(s) present on the device.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.1
hwPRBSTestResultTestIndexIndicate the PRBS test hisotry test index. 0 is invalid.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.2
hwPRBSTestResultPhyPortIfNameInterface Name of the testing phyicial port.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.3
hwPRBSTestResultSideIndicate PRBS test side.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.4
hwPRBSTestResultPatternIndicate PRBS pattern. Refer to hwPRBSTestPortStatusPatternBitmap, but single bit here.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.5
hwPRBSTestResultIntervalTimePeriod time of each interval, in second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.6
hwPRBSTestResultIntervalCountPRBS test interval repeat count.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.7
hwPRBSTestResultTestingIntervalIndexIndicate the ongoing testing interval index.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.8
hwPRBSTestResultStartTimeStart time of the test.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.9
hwPRBSTestResultStopTimeStop time of the test.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.10
hwPRBSTestResultProgressPrgress of the test. 100 means 100%.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.11
hwPRBSTestResultRemainTimeRemaining time of the test, in second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.12
hwPRBSTestResultErrInsertedWhether error-bit inserted of the testro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.13
hwPRBSTestResultTotalBitTotal-bit of the test.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.14
hwPRBSTestResultErrorBitError-bit of the test.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.15
hwPRBSTestResultBerCoeThe coefficient value of bit-error-ratio.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.16
hwPRBSTestResultBerPowThe power value of bit-error-ratio.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.17
hwPRBSTestResultLosLoss of sync second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.18
hwPRBSTestResultEsError second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.19
hwPRBSTestResultEfsError free second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.20
hwPRBSTestResultSesSeverely error second, comparing with 1E-3.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.21
hwPRBSTestResultUasUnavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.22
hwPRBSTestResultSegmentTimePeriod time of each segment, in second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.23
hwPRBSTestResultSegmentTotalCountSegment count of the whole PRBS test.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.24
hwPRBSTestResultTestingSegmentIndexIndicate the ongoing testing segment index.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.25
hwPRBSTestIntervalTableThis table lists PRBS test interval info.
SEQUENCE OF HwPRBSTestIntervalEntry
.1.3.6.1.4.1.2011.5.25.157.1.20.3
hwPRBSTestIntervalEntryThis table lists PRBS test interval info.
HwPRBSTestIntervalEntry
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1
hwPRBSTestIntervalIfNameInterface name of port(s) present on the device.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.1
hwPRBSTestIntervalTestIndexIndicate the PRBS test hisotry test index. 0 is invalid.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.2
hwPRBSTestIntervalIndexIndicate the interval index of a test. 0 is invalid.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.3
hwPRBSTestIntervalStartTimeStart time of the interval.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.4
hwPRBSTestIntervalStopTimeStop time of the intervalro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.5
hwPRBSTestIntervalProgressPrgress of the interval. 100 means 100%.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.6
hwPRBSTestIntervalRemainTimeRemaining time of the interval, in second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.7
hwPRBSTestIntervalErrInsertedWhether error-bit inserted of the intervalro
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.8
hwPRBSTestIntervalTotalBitTotal-bit of the interval.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.9
hwPRBSTestIntervalErrorBitError-bit of the interval.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.10
hwPRBSTestIntervalBerCoeThe coefficient value of bit-error-ratio.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.11
hwPRBSTestIntervalBerPowThe power value of bit-error-ratio.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.12
hwPRBSTestIntervalLosLoss of sync second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.13
hwPRBSTestIntervalEsError second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.14
hwPRBSTestIntervalEfsError free second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.15
hwPRBSTestIntervalSesSeverely error second, comparing with 1E-3.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.16
hwPRBSTestIntervalUasUnavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.17
hwPRBSTestSegmentTableThis table lists PRBS test segment info.
SEQUENCE OF HwPRBSTestSegmentEntry
.1.3.6.1.4.1.2011.5.25.157.1.20.4
hwPRBSTestSegmentEntryThis table lists PRBS test segment info.
HwPRBSTestSegmentEntry
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1
hwPRBSTestSegmentIfNameInterface name of port(s) present on the device.ro
OCTET STRING
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.1
hwPRBSTestSegmentTestIndexIndicate the PRBS test index. 0 is invalid.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.2
hwPRBSTestSegmentIndexIndicate the segment index of a test. 0 is invalid.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.3
hwPRBSTestSegmentStartTimeStart time of the interval.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.4
hwPRBSTestSegmentEndTimeStop time of the intervalro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.5
hwPRBSTestSegmentTotalBitTotal-bit of the segment.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.6
hwPRBSTestSegmentErrorBitError-bit of the segment.ro
Counter64
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.7
hwPRBSTestSegmentBerCoeThe coefficient value of bit-error-ratio.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.8
hwPRBSTestSegmentBerPowThe power value of bit-error-ratio.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.9
hwPRBSTestSegmentLosLoss of sync second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.10
hwPRBSTestSegmentEsError second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.11
hwPRBSTestSegmentEfsError free second.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.12
hwPRBSTestSegmentSesSeverely error second, comparing with 1E-3.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.13
hwPRBSTestSegmentUasUnavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.ro
Unsigned32
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.14
hwOtn
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.21
hwOtnTableIndicates the otn attributes of the WDM interface.
SEQUENCE OF HwOtnEntry
.1.3.6.1.4.1.2011.5.25.157.1.21.1
hwOtnEntryThis table lists the otn attributes of the WDM interface.
HwOtnEntry
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1
hwOtnIfIndexInterface index(es) of port(s) present on the device.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.1
hwOtnFecModeIndicates the Fec mode of the WDM interface. By default, the Fec mode is standard.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.2
hwLogicalPort
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.1.22
hwLogicalPortTableThis table lists the working status of the logical ports.
SEQUENCE OF HwLogicalPortEntry
.1.3.6.1.4.1.2011.5.25.157.1.22.1
hwLogicalPortEntryThis table lists the working status of the logical ports.
HwLogicalPortEntry
.1.3.6.1.4.1.2011.5.25.157.1.22.1.1
hwLogicalPortIfIndexInterface index(es) of the logical port(s) present on the device .
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.157.1.22.1.1.1
hwLogicalPortStatisticEnableIndicates the statistic enable status of the logical port(s) .rw
Enumeration
.1.3.6.1.4.1.2011.5.25.157.1.22.1.1.2
hwPortNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.2
hwPortACRMasterPWChangeCES-ACR master PW change notification,indicates master pw change or master pw status change,this may happen when a pw is deleted or the pw status change.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.1
hwDslImaGroupTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.2.2
hwDslImaGroupLEDownThe ima group local edge down notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.2.1
hwDslImaGroupLEUpThe ima group local edge up notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.2.2
hwDslImaGroupREDownThe ima group remote edge down notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.2.3
hwDslImaGroupREUpThe ima group remote edge up notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.2.4
hwDslImaLinkTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.2.3
hwDslImaLinkLifThe ima link lif notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.1
hwDslImaLinkLifResumeThe ima link lif resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.2
hwDslImaLinkLodsThe ima link lods notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.3
hwDslImaLinkLodsResumeThe ima link lods resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.4
hwDslImaLinkRfiThe ima link rfi notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.5
hwDslImaLinkRfiResumeThe ima link rfi resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.6
hwDslImaLinkReTxUnusableThe ima link remote tx unusable notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.7
hwDslImaLinkReTxUsableThe ima link remote tx usable notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.8
hwDslImaLinkReRxUnusableThe ima link remote rx unusable notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.9
hwDslImaLinkReRxUsableThe ima link remote tx usable notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.3.10
hwDslLinkTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.2.4
hwDslLinkFrameLostThe dsl link frame lost notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.4.1
hwDslLinkFrameResumeThe dsl link frame resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.4.2
hwDslLinkSignalLostThe dsl link signal lost notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.4.3
hwDslLinkSignalResumeThe dsl link signal resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.4.4
hwCesPwRemoteLosPktAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.5
hwCesPwRemoteLosPktAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.6
hwCesPwOppositeRaiIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.7
hwCesPwOppositeRaiResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.8
hwLosAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.9
hwLosAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.10
hwLofAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.11
hwLofAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.12
hwOofAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.13
hwOofAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.14
hwB1TcaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.15
hwB1TcaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.16
hwB2TcaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.17
hwB2TcaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.18
hwJ0TimAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.19
hwJ0TimAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.20
hwLrdiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.21
hwLrdiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.22
hwSfbereAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.23
hwSfbereAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.24
hwAuLopAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.25
hwAuLopAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.26
hwLaisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.27
hwLaisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.28
hwSdbereAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.29
hwSdbereAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.30
hwPtimAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.31
hwPtimAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.32
hwPuneqAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.33
hwPuneqAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.34
hwPrdiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.35
hwPrdiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.36
hwB3TcaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.37
hwB3TcaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.38
hwPplmAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.39
hwPplmAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.40
hwPaisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.41
hwPaisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.42
hwAuAisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.43
hwAuAisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.44
hwVlopAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.45
hwVlopAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.46
hwLomAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.47
hwLomAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.48
hwLpTimVc12AlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.49
hwLpTimVc12AlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.50
hwLpUneqVc12AlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.51
hwLpUneqVc12AlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.52
hwVrdiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.53
hwVrdiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.54
hwBip2TcaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.57
hwBip2TcaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.58
hwLpSlmVc12AlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.59
hwLpSlmVc12AlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.60
hwTuAisVc12AlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.61
hwTuAisVc12AlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.62
hwE1EsTcaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.63
hwE1EsTcaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.64
hwE1LmfaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.67
hwE1LmfaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.68
hwE1UpE1AisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.69
hwE1UpE1AisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.70
hwE1AlmE1RaiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.71
hwE1AlmE1RaiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.72
hwCesPwOppositeAcFaultIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.73
hwCesPwOppositeAcFaultResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.74
hwCesLosPktExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.75
hwCesLosPktExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.76
hwCesMisorderPktExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.77
hwCesMisorderPktExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.78
hwCesStrayPktExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.79
hwCesStrayPktExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.80
hwCesMalPktExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.81
hwCesMalPktExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.82
hwCesJtrUdrExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.83
hwCesJtrUdrExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.84
hwCesJtrOvrExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.85
hwCesJtrOvrExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.86
hwRroolAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.87
hwRroolAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.88
hwVrfiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.89
hwVrfiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.90
hwV5VcaisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.91
hwV5VcaisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.92
hwCposE1AlmE1RaiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.95
hwCposE1AlmE1RaiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.96
hwCposE1LfaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.97
hwCposE1LfaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.98
hwCposE1UpE1AisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.99
hwCposE1UpE1AisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.100
hwCposE1DownE1AisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.101
hwCposE1DownE1AisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.102
hwE1DownE1AisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.103
hwE1DownE1AisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.104
hwCposE1LmfaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.111
hwCposE1LmfaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.112
hwLaserShutAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.113
hwLaserShutAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.114
hwLaserAutoShutAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.115
hwLaserAutoShutAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.116
hwLoopbackAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.117
hwLoopbackAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.118
hwOcdAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.119
hwOcdAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.120
hwLcdAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.121
hwLcdAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.122
hwUhcsAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.123
hwUhcsAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.124
hwChcsAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.125
hwChcsAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.126
hwChannelLoopbackAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.127
hwChannelLoopbackAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.128
hwCesLopsAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.129
hwCesLopsAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.130
hwAtmPwLosPktExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.131
hwAtmPwLosPktExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.132
hwAtmPwMisorderPktExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.133
hwAtmPwMisorderPktExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.134
hwAtmPwUnknownCellExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.135
hwAtmPwUnknownCellExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.136
hwInputErrorAlarmThe port input errors notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.153
hwInputErrorAlarmResumeThe port input errors resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.154
hwOutputErrorAlarmThe port output errors notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.155
hwOutputErrorAlarmResumeThe port output errors resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.156
hwPortAlarmTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.2.157
hwPhysicalPortCrcErrorPort Crc error alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.1
hwPhysicalPortCrcErrorResumePort Crc error alarm resume.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.2
hwPhysicalPortSymbolErrorPort Symbol error alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.3
hwPhysicalPortSymbolErrorResumePort Symbol error alarm resume.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.4
hwPhysicalPortSdhErrorPort Sdh error alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.5
hwPhysicalPortSdhErrorResumePort Sdh error alarm resume.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.6
hwPhysicalPortBip8SdErrorPort BIP8 Signal Degrade alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.7
hwPhysicalPortBip8SdErrorResumePort BIP8 Signal Degrade alarm resume.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.8
hwPhysicalPortCrcPacketErrorRatioPort CRC-PER(Packet Error Ratio) alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.9
hwPhysicalPortCrcPacketErrorRatioResumePort CRC-PER(Packet Error Ratio) alarm resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.10
hwPhysicalPortCrcSdPort MAC_FCS_SD alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.11
hwPhysicalPortCrcSdResumePort MAC_FCS_SD alarm resume.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.12
hwPhysicalPortCrcExcPort MAC_FCS_EXC alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.13
hwPhysicalPortCrcExcResumePort MAC_FCS_EXC alarm resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.14
hwPhysicalPortCrcPerWarningPort CRC-PER(Packet Error Ratio) warning notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.15
hwPhysicalPortCrcPerWarningResumePort CRC-PER(Packet Error Ratio) warning resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.16
hwPhysicalPortFlowSurge
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.2.157.17
hwInputBroadcastSurgeOccurInput broadcast surge occurred.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.17.1
hwInputBroadcastSurgeResumeInput broadcast surge resumed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.17.2
hwOutputBroadcastSurgeOccurOutput broadcast surge occurred.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.17.3
hwOutputBroadcastSurgeResumeOutput broadcast surge resumed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.157.17.4
hwLoopBackAutoClearNoticeset port undo loopback while set loopback autoclear enable when time out.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.160
hwChannelLoopBackAutoClearNoticeset channel undo loopback while set loopback autoclear enable when time out.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.161
hwHpJ1TiuAlarmTrace Identifier Unstable in the Higher order Path.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.162
hwHpJ1TiuAlarmResumeTrace Identifier Unstable in the Higher order Path alarm resume.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.163
hwPortAlarmInverseAutoRecoverPort alarm inverse auto recover.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.164
hwB1ExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.165
hwB1ExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.166
hwB3ExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.167
hwB3ExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.168
hwBip2ExcAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.169
hwBip2ExcAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.170
hwLicenseLimitAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.171
hwLicenseLimitAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.172
hwOpticalModuleIsNotAuthorizedOptical Module is not Authorized alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.173
hwOpticalModuleIsNotAuthorizedResumeOptical Module is not Authorized alarm resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.174
hwLocalFaultAlarmThe Local Fault alarm has occured. Local Fault indicates a fault detected on the receive data path between the remote and the local.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.175
hwLocalFaultAlarmResumeThe Local Fault alarm has resumed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.176
hwRemoteFaultAlarmThe Remote Fault alarm has occured. Remote Fault indicates a fault on the transmit path between the local and the remote.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.177
hwRemoteFaultAlarmResumeThe Remote Fault alarm has resumed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.178
hwCopperPolarityErrorThe copper polarity error alarm has occurred. Polarity errors have detected on receive twisted-pairs, please change a new one.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.179
hwCopperPolarityErrorResumeThe copper polarity error alarm has resumed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.180
hwLotuaisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.181
hwLotuaisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.182
hwLotulomAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.183
hwLotulomAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.184
hwLotusdberAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.185
hwLotusdberAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.186
hwLotusfberAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.187
hwLotusfberAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.188
hwLoduaisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.189
hwLoduaisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.190
hwLodulckAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.191
hwLodulckAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.192
hwLoduociAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.193
hwLoduociAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.194
hwLpmbdiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.195
hwLpmbdiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.196
hwLpmtimAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.197
hwLpmtimAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.198
hwLsmbdiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.199
hwLsmbdiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.200
hwLsmiaeAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.201
hwLsmiaeAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.202
hwLsmtimAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.203
hwLsmtimAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.204
hwNegotiationFailedAlarmAuto-negotiation failure alarm. Possible causes, including the local auto-negotiation configuration with the peer inconsistencies; the local ability is not compatible with the peer; the physical connection of the two sides is unstable. When the alarm occurs, the port can't be up.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.205
hwNegotiationFailedAlarmResumeAuto-negotiation failure alarm resume.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.206
hwEthHalfDuplexThe port works in the half-duplex mode.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.207
hwEthFullDuplexThe half-duplex mode alarm resume.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.208
hwPhysicalPortAutoDetectFailInterface auto adapter fail alarm notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.209
hwPhysicalPortAutoDetectSuccessInterface auto adapter fail alarm resume notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.210
hwNotSameBoardInTrunkNot same boards in Eth-trunk.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.211
hwOtnAlarm
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.2.212
hwOtuLomAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.1
hwOtuLomAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.2
hwOtuAisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.3
hwOtuAisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.4
hwOtuSdAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.5
hwOtuSdAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.6
hwOtuSfAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.7
hwOtuSfAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.8
hwSmBdiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.9
hwSmBdiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.10
hwSmIaeAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.11
hwSmIaeAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.12
hwSmTimAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.13
hwSmTimAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.14
hwOduAisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.15
hwOduAisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.16
hwOduLokAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.17
hwOduLokAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.18
hwOduOciAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.19
hwOduOciAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.20
hwPmBdiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.21
hwPmBdiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.22
hwPmTimAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.23
hwPmTimAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.24
hwPrefecTcaAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.25
hwPrefecTcaAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.212.26
hwE3UpE3AisAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.213
hwE3UpE3AisAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.214
hwE3AlmE3RaiAlarmIndicates the alarm is detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.215
hwE3AlmE3RaiAlarmResumeIndicates the alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.216
hwMultiServiceOnOneCardAlarmMultiple services be configured on the same chip of the card.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.217
hwMultiServiceOnOneCardAlarmResumeThere is no multiple services on the same chip of the card.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.157.2.218
hwPortConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.11
hwPortCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.11.1
hwPortGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.157.11.2
HUAWEI-PORT-MIB - SNMP MIB Reference | MIBs Explorer