HUAWEI-IMA-MIB
AI MIB Summary
The HUAWEI-IMA-MIB enables configuration and monitoring of Inverse Multiplexing for ATM (IMA) interfaces on Huawei network equipment, managing IMA group parameters, member link states, and synchronization status to aggregate multiple T1/E1 circuits into a single logical high-bandwidth ATM pipe.
The MIB is mainly used to configure Inverse Multiplexing for ATM (IMA) interfaces.
Main OID:
hwImaMIB.1.3.6.1.4.1.2011.5.25.176
71
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
hwImaMIBThe MIB is mainly used to configure Inverse Multiplexing
for ATM (IMA) interfaces. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.176 |
HUAWEI-MIBThe MIB is mainly used to configure Inverse Multiplexing
for ATM (IMA) interfaces. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176 |
hwImaMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.176.1 |
hwImaGroupTableThe IMA Group Configuration table. SEQUENCE OF HWImaGroupEntry .1.3.6.1.4.1.2011.5.25.176.1.1 |
hwImaGroupEntryAn entry in the IMA Group table. HWImaGroupEntry .1.3.6.1.4.1.2011.5.25.176.1.1.1 |
hwImaGroupIfIndexThis object identifies the logical interface number ('ifIndex')
assigned to this IMA group, and is used to identify corresponding
rows in the Interfaces MIB.
Note that re-initialization of the management agent may cause
a client's 'hwImaGroupIfIndex' to change.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.176.1.1.1.1 |
hwImaGroupNeStateThe current operational state of the near-end IMA Group State
Machine.ro ImaGroupState .1.3.6.1.4.1.2011.5.25.176.1.1.1.2 |
hwImaGroupFeStateThe current operational state of the far-end IMA Group State
Machine.ro ImaGroupState .1.3.6.1.4.1.2011.5.25.176.1.1.1.3 |
hwImaGroupSymmetrySymmetry of the IMA group.ro ImaGroupSymmetry .1.3.6.1.4.1.2011.5.25.176.1.1.1.4 |
hwImaGroupMinNumTxLinksMinimum number of transmit links required to be Active for
the IMA group to be in the Operational state.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.5 |
hwImaGroupMinNumRxLinksMinimum number of receive links required to be Active for
the IMA group to be in the Operational state.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.6 |
hwImaGroupTxTimingRefLinkThe ifIndex of the transmit timing reference link to be
used by the near-end for IMA data cell clock recovery from
the ATM layer. The distinguished value of zero may be used
if no link has been configured in the IMA group, or if the
transmit timing reference link has not yet been selected.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.176.1.1.1.7 |
hwImaGroupRxTimingRefLinkThe ifIndex of the receive timing reference link to be
used by near-end for IMA data cell clock recovery toward
the ATM layer. The distinguished value of zero may be used
if no link has been configured in the IMA group, or if the
receive timing reference link has not yet been detected.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.176.1.1.1.8 |
hwImaGroupTxImaIdThe IMA ID currently in use by the near-end IMA function.ro Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.9 |
hwImaGroupRxImaIdThe IMA ID currently in use by the far-end IMA function.ro Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.10 |
hwImaGroupTxFrameLengthThe frame length to be used by the IMA group in the transmit
direction. Can only be set when the IMA group is startup.rw ImaFrameLength .1.3.6.1.4.1.2011.5.25.176.1.1.1.11 |
hwImaGroupRxFrameLengthValue of IMA frame length as received from remote IMA function.ro ImaFrameLength .1.3.6.1.4.1.2011.5.25.176.1.1.1.12 |
hwImaGroupDiffDelayMaxThe maximum number of milliseconds of differential delay among
the links that will be tolerated on this interface.rw MilliSeconds .1.3.6.1.4.1.2011.5.25.176.1.1.1.13 |
hwImaGroupAlphaValueThis indicates the 'alpha' value used to specify the number
of consecutive invalid ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state.ro Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.14 |
hwImaGroupBetaValueThis indicates the 'beta' value used to specify the number
of consecutive errored ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state.ro Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.15 |
hwImaGroupGammaValueThis indicates the 'gamma' value used to specify the number
of consecutive valid ICP cells to be detected before moving
to the IMA Sync state from the IMA PreSync state.ro Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.16 |
hwImaGroupNumTxActLinksThe number of links which are configured to transmit and are
currently Active in this IMA group.ro Gauge32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.17 |
hwImaGroupNumRxActLinksThe number of links which are configured to receive and are
currently Active in this IMA group.ro Gauge32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.18 |
hwImaGroupTxOamLabelValueIMA OAM Label value transmitted by the NE IMA unit.ro Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.19 |
hwImaGroupRxOamLabelValueIMA OAM Label value transmitted by the FE IMA unit. The value 0
likely means that the IMA unit has not received an OAM Label
from the FE IMA unit at this time.ro Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.20 |
hwImaGroupFirstLinkIfIndexThis object identifies the first link of this IMA Group.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.176.1.1.1.21 |
hwImaGroupNameThe name of interface ImaGroup.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.176.1.1.1.22 |
hwImaGroupTxClockThe clock mode to be used by the IMA group in the transmit direction.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.23 |
hwImaGroupRxClockMode of IMA clock as received from remote IMA function.ro Integer32 .1.3.6.1.4.1.2011.5.25.176.1.1.1.24 |
hwImaLinkTableThe IMA group Link Status and Configuration table. SEQUENCE OF HWImaLinkEntry .1.3.6.1.4.1.2011.5.25.176.1.2 |
hwImaLinkEntryAn entry in the IMA Group Link table. HWImaLinkEntry .1.3.6.1.4.1.2011.5.25.176.1.2.1 |
hwImaLinkIfIndexThis corresponds to the 'ifIndex' of the MIB-II interface
on which this link is established. This object also
corresponds to the logical number ('ifIndex') assigned to
this IMA link. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.176.1.2.1.1 |
hwImaLinkGroupIfIndexThis object identifies the logical interface number ('ifIndex')
assigned to this IMA group. The specified link will be bound to
this IMA group.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.176.1.2.1.2 |
hwImaLinkNeTxStateThe current state of the near-end transmit link.ro ImaLinkState .1.3.6.1.4.1.2011.5.25.176.1.2.1.3 |
hwImaLinkNeRxStateThe current state of the near-end receive link.ro ImaLinkState .1.3.6.1.4.1.2011.5.25.176.1.2.1.4 |
hwImaLinkFeTxStateThe current state of the far-end transmit link as reported
via ICP cells.ro ImaLinkState .1.3.6.1.4.1.2011.5.25.176.1.2.1.5 |
hwImaLinkFeRxStateThe current state of the far-end receive link as reported
via ICP cells.ro ImaLinkState .1.3.6.1.4.1.2011.5.25.176.1.2.1.6 |
hwImaLinkRowStatusThe hwImaLinkRowStatus object allows create, change, and delete
operations on hwImaLinkTable entries.
To create a new conceptual row (or instance) of the hwImaLinkTable,
hwImaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'.
A successful set of the imaLinkGroupIndex object must be performed
before the hwImaLinkRowStatus of a new conceptual row can be set to
'active'.
To change (modify) the imaLinkGroupIndex in an hwImaLinkTable entry,
the hwImaLinkRowStatus object must first be set to 'notInService'.
Only then can this object in the conceptual row be modified.
This is due to the fact that the imaLinkGroupIndex object provides
the association between a physical IMA link and the IMA group to
which it belongs, and setting the imaLinkGroupIndex object to a
different value has the effect of changing the association between
a physical IMA link and an IMA group. To place the link 'in group',
the hwImaLinkRowStatus object is set to 'active'. While the row is
not in 'active' state, both the Transmit and Receive IMA link state
machines are in the 'Not In Group' state.
To remove (delete) an hwImaLinkTable entry from this table, set
this object to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.176.1.2.1.51 |
hwImaLinkNameDescription.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.176.1.2.1.52 |
hwImaAlarmTableDescription. SEQUENCE OF HwImaAlarmEntry .1.3.6.1.4.1.2011.5.25.176.1.3 |
hwImaAlarmEntryDescription. HwImaAlarmEntry .1.3.6.1.4.1.2011.5.25.176.1.3.1 |
hwImaAlarmIfIndexDescription. Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.1 |
hwImaGroupNeDownEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.2 |
hwImaGroupFeDownEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.3 |
hwImaGroupTxClkMismatchEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.4 |
hwImaLinkLifEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.5 |
hwImaLinkLodsEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.6 |
hwImaLinkRfiEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.7 |
hwImaLinkFeTxUnusableEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.8 |
hwImaLinkFeRxUnusableEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.9 |
hwIMAAllEnDescription.rw Integer32 .1.3.6.1.4.1.2011.5.25.176.1.3.1.10 |
hwImaMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.176.2 |
hwImaMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.176.2.1 |
hwImaMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.176.2.2 |
hwImaNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.176.3 |
hwImaGroupNeDownAlarmDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.1 |
hwImaGroupNeDownAlarmResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.2 |
hwImaGroupFeDownAlarmDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.3 |
hwImaGroupFeDownAlarmResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.4 |
hwImaGroupTxClkMismatchDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.5 |
hwImaGroupTxClkMismatchResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.6 |
hwImaLinkLifAlarmDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.7 |
hwImaLinkLifAlarmResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.8 |
hwImaLinkLodsAlarmDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.9 |
hwImaLinkLodsAlarmResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.10 |
hwImaLinkRfiAlarmDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.11 |
hwImaLinkRfiAlarmResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.12 |
hwImaLinkFeTxUnusableAlarmDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.13 |
hwImaLinkFeTxUnusableAlarmResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.14 |
hwImaLinkFeRxUnusableAlarmDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.15 |
hwImaLinkFeRxUnusableAlarmResumeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.176.3.16 |
More MIBs from Huawei
Browse all HuaweiMIBs →HUAWEI-MIB
The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
3074 objects→
HUAWEI-SERVER-IBMC-MIB
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
2171 objects→
HUAWEI-XPON-MIB
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
1553 objects→
H3C-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1462 objects→
HUAWEI-WLAN-CONFIGURATION-MIB
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
1280 objects→
HUAWEI-XQoS-MIB
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.
1134 objects→