Home/Catalog/HUAWEI-WLAN-AP-MIB

HUAWEI-WLAN-AP-MIB

AI MIB Summary

The HUAWEI-WLAN-AP-MIB module enables monitoring and management of Huawei Wireless LAN Access Points via SNMP, specifically tracking configuration consistency and generating traps for discrepancies between the AP's configured parameters and its actual operational state.

V1.31, add hwApConfigInconsistWithActualTrap trap node.
Main OID:
hwWlanAp.1.3.6.1.4.1.2011.6.139.13
407
Objects
Active
Status
4
Dependencies

Imported Objects

HUAWEI-WLAN-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

407 total
Object Name
hwWlanApV1.31, add hwApConfigInconsistWithActualTrap trap node.
MODULE-IDENTITY
.1.3.6.1.4.1.2011.6.139.13
hwWlanApTrapInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.1
hwWlanApTrap
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.1.1
hwApFaultTrapThe object indicates an AP communication fault alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.1
hwApNormalTrapThis object indicates an AP communication fault clear alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.2
hwApPingResultTrapThis object indicates an AP ping result alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.3
hwApConfigCommitTrapThis object indicates that the configuration of an AP is successfully committed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.4
hwUnAuthorizedApRecordExistTrapThis object indicates that unauthorized AP alarms exist.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.5
hwUnAuthorizedApRecordClearTrapThis object indicates that unauthorized AP alarms are cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.6
hwApCpuOverloadTrapThis object indicates that the CPU usage of an AP exceeds the upper threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.7
hwApCpuOverloadRestoreTrapThis object indicates that an AP's CPU usage restores to the allowed range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.8
hwApMemoryOverloadTrapThis object indicates that the memory usage of an AP exceeds the upper threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.9
hwApMemoryOverloadRestoreTrapThis object indicates that the memory usage of an AP restores to the allowed range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.10
hwApStaFullTrapThis object indicates that new STAs cannot associate with an AP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.11
hwApStaFullRecoverTrapThis object indicates that new STAs can associate with an AP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.12
hwAcDevicesSwitchTrapThis object that an active/standby AC switchover occurs.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.13
hwDyingGaspTrapThis object indicates a dying gasp alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.14
hwApFaultTrapFatDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.15
hwApNormalTrapFatDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.16
hwApTemperatureTooLowTrapThis object indicates that the temperature is too low.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.17
hwApTemperatureTooLowRestoreTrapThis object indicates that the temperature restores to the normal range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.18
hwApTemperatureTooHighTrapThis object indicates that the temperature is too high.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.19
hwApTemperatureTooHighRestoreTrapThis object indicates that the temperature restores to the normal range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.20
hwApOpticalRxPowerTooHighTrapThis object indicates that the receive power of an AP's optical module is too high.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.21
hwApOpticalRxPowerTooHighRestoreTrapThis object indicates that the receive power of an AP's optical module restores to the normal range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.22
hwApOpticalRxPowerTooLowTrapThis object indicates that the receive power of an AP's optical module is too low.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.23
hwApOpticalRxPowerTooLowRestoreTrapThis object indicates that the receive power of an AP's optical module restores to the normal range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.24
hwApOpticalTemperatureTooHighTrapThis object indicates that the temperature of an AP's optical module is too high.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.25
hwApOpticalTemperatureTooHighRestoreTrapThis object indicates that the temperature of an AP's optical module restores to the normal range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.26
hwApOpticalTemperatureTooLowTrapThis object indicates that the temperature of an AP's optical module is too low.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.27
hwApOpticalTemperatureTooLowRestoreTrapThis object indicates that the temperature of an AP's optical module restores to the normal range.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.28
hwApNotSupportCountryCodeTrapThis object indicates that the country code is not supported.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.29
hwApColdBootTrapThis object indicates a cold restart alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.30
hwApColdBootRestoreTrapThis object indicates a cold restart clear alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.31
hwApHotBootTrapThis object indicates a hot restart alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.32
hwApHotBootRestoreTrapThis object indicates a hot restart clear alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.33
hwApCRCTooHighTrapThis object indicates a CRC error alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.34
hwApCRCTooHighRestoreTrapThis object indicates that CRC error alarms are cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.35
hwApConflictApNameTrapThis object indicates an alarm of AP name conflict.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.36
hwApLicenseTrapThis object indicates an AP license resource exhaustion alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.37
hwApFmeaIICFaultTrapThis object indicates an FMEA IIC fault alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.38
hwApFmeaIICFaultRestoreTrapThis object indicates that the FMEA IIC fault alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.39
hwApFmeaPHYFaultTrapThis object indicates an FMEA PHY fault alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.40
hwApFmeaPHYFaultRestoreTrapThis object indicates that the FMEA PHY fault alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.41
hwApFmeaFaultTrapThis object indicates an FMEA fault alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.42
hwApFmeaFaultRestoreTrapThis object indicates that the FMEA fault alarm is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.43
hwApOpticalInsertTrapThis object indicates an alarm that is generated when an optical module is installed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.44
hwApOpticalRemoveTrapThis object indicates an alarm generated due to installation of an optical module is cleared.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.45
hwApReceivedInvalidArpNewTrapThis object indicates that invalid ARP packets are received.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.46
hwApVersionMismatchTrapThis object indicates that the AP version and the AC version do not match.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.47
hwRadioUploadRemoteCaptureFileTrapThis object indicates the alarm on the remote capture result upload result.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.48
hwMPJoinedOnEthernetTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.49
hwMPJoinedOnEthernetRestoreTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.50
hwMPPJoinedOnAirTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.51
hwMPPJoinedOnAirRestoreTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.52
hwApOpticalTxPowerTooHighTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.53
hwApOpticalTxPowerTooHighRestoreTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.54
hwApOpticalTxPowerTooLowTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.55
hwApOpticalTxPowerTooLowRestoreTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.56
hwApOnLineNumExceedCardSpecTrapThis object indicates the number of online APs on the card has exceeded the maximum value.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.57
hwApFanInvalidTrapThis object indicates a complete failure of a fan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.58
hwApFanInvalidRestoreTrapThis object indicates that the complete failure of a fan has been rectified.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.59
hwApStorageDevRemoveTrapThis object indicates that the storage card is removed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.60
hwApStorageDevInsertTrapThis object indicates that the storage card is installed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.61
hwApPoePowerOffTrapThis object indicates that a port is powered off.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.62
hwApPoePowerOnTrapThis object indicates that a port is powered on.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.63
hwApPoePdConnectedTrapThis object indicates that a port detects a PD connected to it.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.64
hwApPoePdDisconnectedTrapThis object indicates that a port detects disconnection of the attached PD.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.65
hwApPoePdClassOvercurrentTrapThis object indicates that a port detects a PD whose current exceeds the threshold of the corresponding class.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.66
hwApPoePdPriorityDifferentTrapThis object indicates that the priority configured on a port is different from the PD priority.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.67
hwApPoePowerOverUtilizationThresholdTrapThis object indicates that the load power of a PoE slot exceeds the upper limit.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.68
hwApPoePowerOverUtilizationThresholdRestoreTrapThis object indicates that the load power of a PoE slot has fallen below the upper limit.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.69
hwApSTPAutoShutdownTrapThis object indicates that STP detected a loop and shut down the port based on configuration.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.70
hwApSTPAutoShutdownRestoreTrapThis object indicates that the shutdown port has recovered.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.71
hwApOpticalInvalidTrapThis object indicates that the optical transceiver does not work normally.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.72
hwApOpticalInvalidRestoreTrapThis object indicates that the optical transceiver has restored.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.73
hwApVapStaFullTrapThis object indicates that new STAs cannot associate with an VAP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.74
hwVapStaFullRecoverTrapThis object indicates that new STAs can associate with an VAP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.75
hwWlanBLELowPowerTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.76
hwWlanBLELowPowerRestoreTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.77
hwWlanBLEOfflineTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.78
hwWlanBLEOfflineRestoreTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.79
hwWlanBLEFaultyTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.80
hwWlanBLEFaultyRestoreTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.81
hwAPIoTCardInsertTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.82
hwAPIoTCardRemoveTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.83
hwAPIoTServerStartFailTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.84
hwAPIoTServerStartFailResumeTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.85
hwWlanApSubFirmwareMismatchTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.86
hwApSpecificConfigChangedTrapDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.87
hwApConfigInconsistWithActualTrapThis alarm is generated when a the AP config is inconsistent with the actual attribute.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.6.139.13.1.1.88
hwWlanApTrapObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.1.2
hwWlanApActualTypeDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.1
hwWlanApCpuOccupancyRateDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.2
hwWlanApMemoryOccupancyRateDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.3
hwWlanApPermitStaNumDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.4
hwWlanStaAuthFailCauseDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.5
hwWlanAcSystemSwitchTypeDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.6
hwWlanApOpticalRxPowerDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.7
hwWlanApOpticalTemperatureDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.8
hwWlanApCfgCountryCodeDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.9
hwWlanApArpAttackSrcMacDescription.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.1.2.10
hwWlanApArpAttackDstMacDescription.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.1.2.11
hwWlanApArpAttackSrcIPDescription.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.1.2.12
hwWlanApArpCfgRateThresholdDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.13
hwWlanApArpActualRateDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.14
hwWlanApNotifyRadioIdDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.15
hwWlanApNotifyOrRestoreTemperatureDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.16
hwWlanOccurTimeDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.17
hwWlanApBootNotifyNameDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.18
hwWlanApFaultTimesDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.19
hwWlanApUnAuthorizedApRecordNumberDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.20
hwWlanCrcErrActualCRC error alarm threshold value.The unit is 1/10000.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.1.2.21
hwWlanCrcThresholdDescription.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.1.2.22
hwWlanApNotifyWlanIdDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.23
hwWlanApLicenseInfoDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.24
hwWlanCrcPortTypeDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.25
hwWlanCrcPortIDDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.26
hwWlanApArpAttackDropNumDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.27
hwWlanApFaultIDThis object indicates an FMEA fault alarm.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.28
hwWlanApIfIndexDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.29
hwWlanApFaultInfoDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.30
hwWlanApSoftWareVersionDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.31
hwRadioUploadRemoteCaptureResultDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.32
hwWlanApRadioIDDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.33
hwWlanApCpuOverloadDescInfoDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.34
hwWlanApOpticalTxPowerDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.35
hwWlanSlotNumDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.36
hwApPoePdPriorityThis object identifies the PD priority.The default value is low.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.1.2.37
hwApPoePortPriorityThis object identifies the priority of an interface.The default value is low.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.1.2.38
hwApPoeCurConsumPowerThis object identifies the current consuming power.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.39
hwApPoeConsumPowerThresholdThis object identifies the threshold of consuming power.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.40
hwApFanIndexThis object identifies the id of fan.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.41
hwApEntityPhysicalNameThis object identifies the phisical name of entity name.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.42
hwApStorageIndexThis object identifies the id of Storage.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.43
hwApStorageNameThis object identifies the name of Storage.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.44
hwWlanApOpticalFaultIDThis object identifies the error corde of the optical transceiver fault.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.45
hwWlanApWlanIDThis object identifies the Wlan Id of the Vap that has the max number of stations.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.1.2.46
hwWlanBLEMacAddrDescription.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.1.2.47
hwWlanApUdpDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.48
hwSubFirmwareNameDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.49
hwSubFirmwareDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.50
hwRealVersionDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.51
hwExpectVersionDescription.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.52
hwWlanApIotCardIdDescription.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.1.2.53
hwPowerOffReasonThis object identifies the reason of power off.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.54
hwApSpecificChangeConfigThis object identifies the config of change.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.55
hwApSpecificChangeReasonThis object identifies the reason of change config.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.56
hwApInconsisitConfigThis object identifies the inconsistent config.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.57
hwApConfigInconsisitReasonThis object identifies the reason of inconsistent config.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.1.2.58
hwWlanApTypeObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.2
hwWlanApTypeTableThis table is used to query attributes based on AP types and restart APs based on AP types.
SEQUENCE OF HwWlanApTypeEntry
.1.3.6.1.4.1.2011.6.139.13.2.1
hwWlanApTypeEntryThe index of this table is hwWlanApType.
HwWlanApTypeEntry
.1.3.6.1.4.1.2011.6.139.13.2.1.1
hwWlanApTypeThis object indicates the AP type name. It is the index of the table.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.2.1.1.1
hwWlanApTypeDescThis object indicates description of an AP type.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.2.1.1.2
hwWlanApTypeWiredPortNumThis object indicates the number of wired ports on APs of a certain type.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.2.1.1.3
hwWlanApTypeRadioNumThis object indicates the number of radios on APs of a certain type.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.2.1.1.4
hwWlanApTypeMaxStaNumThis object indicates the maximum number of access STAs on an AP of a certain type.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.2.1.1.5
hwWlanApTypeResetThis object indicates that APs are restarted based on the AP type.rw
Integer32
.1.3.6.1.4.1.2011.6.139.13.2.1.1.6
hwWlanApTypeRadioTableThis table is used to query radio-related attributes of APs of a certain type.
SEQUENCE OF HwWlanApTypeRadioEntry
.1.3.6.1.4.1.2011.6.139.13.2.2
hwWlanApTypeRadioEntryThe indexes of this table are hwWlanApType and hwWlanApTypeRadioIndex.
HwWlanApTypeRadioEntry
.1.3.6.1.4.1.2011.6.139.13.2.2.1
hwWlanApTypeRadioIndexThis object indicates the radio index of APs of a certain type.
Integer32
.1.3.6.1.4.1.2011.6.139.13.2.2.1.1
hwWlanApTypeRadioTypeThis object indicates the radio type of APs of a certain type.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.2.2.1.2
hwWlanRadioMaxSpatialStreamsNumThis object indicates the maximum number of spatial streams of an AP radio.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.2.2.1.3
hwWlanApTypeRadioAntennaGainThis object indicates that the antenna gain is configured according to the radio ID.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.2.2.1.4
hwWlanApTypeRadioMaxVAPNumDescription.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.2.2.1.5
hwWlanApTypeWiredPortTableThis table is used to query wired interface attributes of APs of a certain type.
SEQUENCE OF HwWlanApTypeWiredPortEntry
.1.3.6.1.4.1.2011.6.139.13.2.3
hwWlanApTypeWiredPortEntryThe indexes of this table are hwWlanApType and hwWlanApTypeWiredPortIndex.
HwWlanApTypeWiredPortEntry
.1.3.6.1.4.1.2011.6.139.13.2.3.1
hwWlanApTypeWiredPortIndexThis object indicates the index of an AP's wired interface. Numbering rule: port-index = port-type * 100 + port-number. For example, the indexes of a wall plate AP's GE0, eth0, and eth1 are 200 (2 * 100 + 0 = 200), 100 (1 * 100 + 0 = 100), and 101 (1 * 100 + 1 = 101) respectively.
Integer32
.1.3.6.1.4.1.2011.6.139.13.2.3.1.1
hwWlanApTypeWiredPortTypeThis object indicates the type of an AP's wired interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.2.3.1.2
hwWlanApTypeWiredPortNameThis object indicates the name of a wired interface on APs of a certain type, for example, ethernet 0, ethernet 1, gigabit-ethernet 0, and eth-trunk 0.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.2.3.1.3
hwWlanApObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.3
hwWlanApPing
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.3.1
hwWlanApPingApMacThis object specifies the MAC address in an AP ping operation. If the AP ID and MAC address are specified concurrently, the AP is pinged based on the MAC address.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.1.1
hwWlanApPingAddressThis object indicates the domain name or IP address of the destination host.rw
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.1.2
hwWlanApPingCountThis object indicates the number of times ICMP ECHO-REQUEST packets are sent.Default value: 4.rw
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.3
hwWlanApPingPacketSizeThis object indicates the length of an ECHO-REQUE.rw
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.4
hwWlanApPingWaitTimeThis object indicates the time to wait before sending the next ICMP Request packet.Unit: ms Default value: 2000.rw
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.5
hwWlanApPingTimeOutThis object indicates the timeout period for an ECHO-RESPONSE after an ECHO-REQUEST is sent.Unit: ms Default value: 2000.rw
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.6
hwWlanApPingResultSuccessCountThis object indicates the number of successful AP ping operations. Only the result of the latest AP ping operation is kept.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.7
hwWlanApPingResultFailureCountThis object indicates the number of AP ping operation failures. Only the result of the latest AP ping operation is kept.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.8
hwWlanApPingResultAveResponseTimeThis object indicates the average response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.9
hwWlanApPingResultMinResponseTimeThis object indicates the minimum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.10
hwWlanApPingResultMaxResponseTimeThis object indicates the maximum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.1.11
hwWlanApPingResultFlagThis object indicates the result of the AP ping operation.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.1.12
hwWlanUnauthedApRecordTableThis table describes rogue AP records. Rogue APs are those whose MAC addresses and SNs are not in the whitelist and not confirmed after being discovered by the AC.
SEQUENCE OF HwWlanUnauthedApRecordEntry
.1.3.6.1.4.1.2011.6.139.13.3.2
hwWlanUnauthedApRecordEntryThe index of this table is hwWlanUnauthedApRecordIndex.
HwWlanUnauthedApRecordEntry
.1.3.6.1.4.1.2011.6.139.13.3.2.1
hwWlanUnauthedApRecordIndexThis object indicates the index of a rogue AP record.
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.2.1.1
hwWlanUnauthedApTypeThis object indicates the type of a rogue AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.2.1.2
hwWlanUnauthedApMacAddressThis object indicates the type of a rogue AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.2.1.3
hwWlanUnauthedApSnThis object indicates the SN of a rogue AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.2.1.4
hwWlanUnauthedApIpAddressThis object indicates the IP address of a rogue AP.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.2.1.5
hwWlanUnauthedApRecordTimeThis object indicates the time when a rogue AP is recorded.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.2.1.6
hwWlanApTableThis table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.
SEQUENCE OF HwWlanApEntry
.1.3.6.1.4.1.2011.6.139.13.3.3
hwWlanApEntryThe index of this table is hwWlanApMac.
HwWlanApEntry
.1.3.6.1.4.1.2011.6.139.13.3.3.1
hwWlanApMacThis object indicates the MAC address of an AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.3.1.1
hwWlanApSnThis object indicates the sequence number (SN) of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.2
hwWlanApTypeInfoThis object indicates the AP type.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.3
hwWlanApNameThis object indicates the AP name.rw
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.4
hwWlanApGroupThis object indicates the group to which an AP belongs.rw
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.5
hwWlanApRunStateThis object indicates the AP state.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.3.1.6
hwWlanApSoftwareVersionThis object indicates the AP software version.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.7
hwWlanApHardwareVersionThis object indicates the AP hardware version.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.8
hwWlanApCpuTypeThis object indicates the CPU type of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.9
hwWlanApCpufrequencyThis object indicates the CPU frequency of an AP.Unit: MHz.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.10
hwWlanApMemoryTypeThis object indicates the memory type of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.11
hwWlanApDomainThis object indicates the AP domain.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.12
hwWlanApIpAddressThis object indicates the IP address of an AP.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.3.1.13
hwWlanApIpNetMaskThis object indicates the IP address mask of an AP.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.3.1.14
hwWlanApGatewayIpThis object indicates the gateway IP address of an AP.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.3.1.15
hwWlanApMemorySizeThis object indicates the memory size of an AP.Unit: MB.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.16
hwWlanApFlashSizeThis object indicates the flash memory size of an AP.Unit: MB.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.17
hwWlanApRunTimeThis object indicates the running time of an AP.Unit: tick.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.18
hwWlanApAdminOperThis object indicates administrative status of an AP.rw
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.3.1.19
hwWlanApDNSThis object indicates the AP DNS.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.3.1.20
hwWlanApOnlineTimeThis object indicates online duration of an AP.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.21
hwWlanApSysSoftwareDescThis object indicates system software description of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.22
hwWlanApSysHardtwareDescThis object indicates system hardware description of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.23
hwWlanApSysManufactureThis object indicates the manufacturer of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.24
hwWlanApSysSoftwareNameThis object indicates software name of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.25
hwWlanApSysSoftwareVendorThis object indicates the manufacturer of the AP software.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.26
hwWlanApBomCodeThis object indicates the BOM code.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.27
hwWlanApIpv6AddressThis object indicates the IPv6 address.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.28
hwWlanApIpv6NetMaskThis object indicates the IPv6 address mask.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.29
hwWlanApGatewayIpv6This object indicates the IPv6 gateway.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.30
hwWlanApIpv6DNSThis object indicates the IPv6 DNS.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.31
hwWlanApProtectAcIPv6AddrThis object indicates the IPv6 address of the standby AC.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.32
hwWlanApBootCountTotalThis object indicates the total number of times an AP is restarted.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.33
hwWlanApBootCountPowerOffThis object indicates the number of times an AP is restarted due to a power failure.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.34
hwWlanApBootCountClearThis object clears the AP restart count.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.3.1.35
hwWlanApElectronicLabelThis object indicates the electronic label of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.36
hwWlanApWiredPortNumThis object indicates the total number of wired interfaces.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.37
hwWlanApWiredPortMtuThis object indicates the maximum transmit unit (MTU) of a wired interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.38
hwWlanApWiredPortMacThis object indicates the MAC address of a wired interface.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.3.1.39
hwWlanApMemoryUseRateThis object indicates the memory usage.Unit: %.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.40
hwWlanApCpuUseRateThis object indicates the CPU usage.Unit: %.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.41
hwWlanApFlashFreeSizeThis object indicates available space in the flash memory.Unit: KB.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.42
hwWlanApTemperatureThis object indicates the operating temperature.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.43
hwWlanApOnlineUserNumThis object indicates the number of online users.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.44
hwWlanApDualBandAssoc5gStaNumThis object indicates the number of dual-band terminals that access the 5 GHz radio.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.45
hwWlanApDualBandStaNumThis object indicates the number of STAs that support dual frequency bands.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.46
hwWlanApStaOnlineFailRatioThis object indicates STA online failure ratio on an AP.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.47
hwWlanApStaOfflineRatioThis object indicates STA offline ratio of an AP.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.48
hwWlanApStickyClientRatioThis object indicates the proportion of sticky STAs to all STAs.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.49
hwWlanApUpEthPortSpeedThis object indicates the rate of an upstream Ethernet interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.3.1.50
hwWlanApUpEthPortSpeedModeThis object indicates the rate mode of an upstream Ethernet interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.3.1.51
hwWlanApUpEthPortDuplexThis object indicates the duplex state of an upstream Ethernet interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.3.1.52
hwWlanApUpEthPortDuplexModeThis object indicates the duplex mode of an upstream Ethernet interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.3.1.53
hwWlanApUpPortSpeedThis object indicates the real-time rate of an upstream interface.Unit: Kbps.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.54
hwWlanAPUpPortPERThis object indicates the packet error rate of an upstream interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.55
hwWlanEthportUpRateThis object indicates the upstream rate of an Ethernet interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.56
hwWlanEthportDownRateThis object indicates the downstream rate of an Ethernet interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.57
hwWlanApAirportUpTrafficThis object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.58
hwWlanApAirportDwTrafficThis object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.59
hwWlanApEthportDwTrafficThis object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.60
hwWlanApEthportUpTrafficThis object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.61
hwWlanApUpPortRecvPacketsThis object indicates the total number of frames received on an upstream interface, which is extended to 64 bits.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.3.1.62
hwWlanApUpPortSendPacketsThis object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.3.1.63
hwWlanApRowstatusThis object indicates the row status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.3.1.64
hwWlanApUpPortRecvBytesThis object indicates the total number of bytes received on an upstream interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.3.1.65
hwWlanApUpPortSendBytesThis object indicates the total number of bytes sent on an upstream interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.3.1.66
hwWlanApIdAp ID.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.67
hwWlanCentralApIdThis object indicates the central AP ID.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.68
hwWlanCentralApMacThis object indicates the MAC address of an central AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.3.1.69
hwWlanCentralApNameThis object indicates the central AP name.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.70
hwWlanApSDCardSizeThis object indicates the SD card size of an AP.Unit: MB.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.3.1.71
hwWlanAPLongitudeThis object indicates the longitude of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.72
hwWlanAPLatitudeThis object indicates the latitude of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.3.1.73
hwWlanApWiredPortTableThis table describes AP wired interfaces and is used to query attributes of the wired interfaces.
SEQUENCE OF HwWlanApWiredPortEntry
.1.3.6.1.4.1.2011.6.139.13.3.4
hwWlanApWiredPortEntryThe index of this table is hwWlanApMac and hwWlanApWiredPortIndex.
HwWlanApWiredPortEntry
.1.3.6.1.4.1.2011.6.139.13.3.4.1
hwWlanApWiredPortIndexThis object indicates the index of an AP's wired interface.
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.4.1.1
hwWlanApWiredPortTypeThis object indicates the type of an AP's wired interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.4.1.2
hwWlanApWiredPortDescThis object indicates description of an AP's wired interface.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.4.1.3
hwWlanApWiredPortStateThis object indicates status of an AP's wired interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.4.1.4
hwWlanApWiredPortSpeedThis object indicates the rate of an AP's wired interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.4.1.5
hwWlanApMultiWiredPortDuplexThis object indicates the duplex state of an AP's wired interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.4.1.6
hwWlanApMultiWiredPortNegotiationThis object indicates the auto-negotiation mode of an AP's wired interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.4.1.7
hwWlanApMultiWiredPortModeThis object indicates the working mode of an AP's wired interface.Default value: null.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.4.1.8
hwWlanApWiredPortApIdThis object indicates the AP ID.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.4.1.9
hwWlanApWiredPortApNameThis object indicates the AP name.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.4.1.10
hwWlanApWiredPortStatTableThis table is used to query or clear statistics on AP wired interfaces.
SEQUENCE OF HwWlanApWiredPortStatEntry
.1.3.6.1.4.1.2011.6.139.13.3.5
hwWlanApWiredPortStatEntryThe indexes of this table are hwWlanApMac and hwWlanApWiredPortIndex.
HwWlanApWiredPortStatEntry
.1.3.6.1.4.1.2011.6.139.13.3.5.1
hwWlanApWiredPortStatClearThis object clears interface statistics.rw
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.5.1.1
hwWlanApWiredPortUpDwnTimesThis object indicates the number of times an AP's wired interface alternates between Up and Down.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.5.1.2
hwWlanApWiredPortInPktsThis object indicates the total number of frames received on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.3
hwWlanApWiredPortInUnicastPktsThis object indicates the number of unicast frames received on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.4
hwWlanApWiredPortInNonUnicastPktsThis object indicates the number of non-unicast frames received on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.5
hwWlanApWiredPortInBytesThis object indicates the number of bytes received on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.6
hwWlanApWiredPortInErrorPktsThis object indicates the number of error frames received on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.7
hwWlanApWiredPortInDiscardPktsThis object indicates the number of dropped frames received on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.8
hwWlanApWiredPortOutPktsThis object indicates the total number of frames sent on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.9
hwWlanApWiredPortOutUnicastPktsThis object indicates the number of unicast frames sent on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.10
hwWlanApWiredPortOutNonUnicastPktsThis object indicates the number of non-unicast frames sent on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.11
hwWlanApWiredPortOutBytesThis object indicates the number of bytes sent on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.12
hwWlanApWiredPortOutErrorsPktsThis object indicates the number of error packets sent on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.13
hwWlanApWiredPortOutDiscardPktsThis object indicates the number of dropped packets sent on an AP's wired interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.5.1.14
hwWlanApWiredPortLldpTableThis table is used to query LLDP neighbor information of a specified AP. No entry can be created, modified, or deleted in this table.
SEQUENCE OF HwWlanApWiredPortLldpEntry
.1.3.6.1.4.1.2011.6.139.13.3.6
hwWlanApWiredPortLldpEntryThe indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, and hwWlanApWiredPortLldpRemIndex.
HwWlanApWiredPortLldpEntry
.1.3.6.1.4.1.2011.6.139.13.3.6.1
hwWlanApWiredPortLldpRemLocalPortNumThis object indicates the local port number of the remote neighbor of the AP's wired interface.
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.6.1.1
hwWlanApWiredPortLldpRemIndexThis object indicates the index of the remote neighbor interface of the AP's wired interface.
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.6.1.2
hwWlanApWiredPortLldpRemChassisIdSubtypeThis object indicates the subtype of the remote neighbor of the AP's wired interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.6.1.3
hwWlanApWiredPortLldpRemChassisIdThis object indicates the subtype ID of the remote neighbor of the AP's wired interface.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.6.1.4
hwWlanApWiredPortLldpRemPortIdSubtypeThis object indicates the subtype of the remote neighbor interface of the AP's wired interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.6.1.5
hwWlanApWiredPortLldpRemPortIdThis object indicates the ID of the remote neighbor interface of the AP's wired interface.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.6.1.6
hwWlanApWiredPortLldpRemPortDescThis object indicates descriptions about the remote neighbor interface of the AP's wired interface.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.6.1.7
hwWlanApWiredPortLldpRemSysNameThis object indicates the system name of the remote neighbor of the AP's wired interface.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.6.1.8
hwWlanApWiredPortLldpRemSysDescThis object indicates system descriptions about the remote neighbor of the AP's wired interface.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.6.1.9
hwWlanApWiredPortLldpRemSysCapSupportedThis object indicates whether the remote neighbor of the AP's wired interface supports the system capability.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.6.1.10
hwWlanApWiredPortLldpRemSysCapEnabledThis object enables the system capability of the remote neighbor of the AP's wired interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.6.1.11
hwWlanApWiredPortLldpRemLocalApIdDescription.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.6.1.12
hwWlanApWiredPortLldpRemManAddrTableThis table is used to query management addresses of LLDP neighbors of a specified AP. No entry can be created, modified, or deleted in this table.
SEQUENCE OF HwWlanApWiredPortLldpRemManAddrEntry
.1.3.6.1.4.1.2011.6.139.13.3.7
hwWlanApWiredPortLldpRemManAddrEntryThe indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, hwWlanApWiredPortLldpRemIndex, hwWlanApWiredPortLldpRemManAddrSubtype, and hwWlanApWiredPortLldpRemManAddr.
HwWlanApWiredPortLldpRemManAddrEntry
.1.3.6.1.4.1.2011.6.139.13.3.7.1
hwWlanApWiredPortLldpRemManAddrSubtypeThis object indicates the This object indicates the remote management address subtype of the wired interface.
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.7.1.1
hwWlanApWiredPortLldpRemManAddrThis object indicates the remote management address of the wired interface.
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.7.1.2
hwWlanApWiredPortLldpRemManAddrIfSubtypeThis object indicates the interface subtype of the remote management address of the wired interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.7.1.3
hwWlanApWiredPortLldpRemManAddrIfIdThis object indicates the interface ID of the remote management address of the wired interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.7.1.4
hwWlanApWiredPortLldpRemManAddrOIDThis object indicates the remote management address OID of the wired interface.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.7.1.5
hwWlanApOnlineFailTableThis table is used to query or clear AP online failure records, including failure time and reason.
SEQUENCE OF HwWlanApOnlineFailEntry
.1.3.6.1.4.1.2011.6.139.13.3.8
hwWlanApOnlineFailEntryThe index of this table is hwWlanApOnlineFailMac.
HwWlanApOnlineFailEntry
.1.3.6.1.4.1.2011.6.139.13.3.8.1
hwWlanApOnlineFailMacThis object indicates the MAC address of the STA who fails to go online.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.8.1.1
hwWlanApOnlineFailTimeThis object indicates the latest time when the STA fails to go online.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.8.1.2
hwWlanApOnlineFailReasonThis object indicates the reason for the latest STA online failure.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.8.1.3
hwWlanApOnlineFailRowStatusThis object indicates that online failure records of STAs are deleted based on MAC addresses.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.8.1.4
hwWlanApOfflineTableThis table is used to query or clear AP offline records, including offline time and reason.
SEQUENCE OF HwWlanApOfflineEntry
.1.3.6.1.4.1.2011.6.139.13.3.9
hwWlanApOfflineEntryThe index of this table is hwWlanApOfflineMac.
HwWlanApOfflineEntry
.1.3.6.1.4.1.2011.6.139.13.3.9.1
hwWlanApOfflineMacThis object indicates the MAC address of an AP.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.9.1.1
hwWlanApOfflineTimeThis object indicates the AP offline time.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.9.1.2
hwWlanApOfflineReasonThis object indicates the AP offline reason.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.9.1.3
hwWlanApOfflineRowStatusThis object clears AP offline records.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.9.1.4
hwWlanIDIndexedApTableThis table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.
SEQUENCE OF HwWlanIDIndexedApEntry
.1.3.6.1.4.1.2011.6.139.13.3.10
hwWlanIDIndexedApEntryThe index of this table is hwWlanIDIndexedApId.
HwWlanIDIndexedApEntry
.1.3.6.1.4.1.2011.6.139.13.3.10.1
hwWlanIDIndexedApIdAp ID.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.1
hwWlanIDIndexedApMacThis object indicates the MAC address of an AP.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.10.1.2
hwWlanIDIndexedApSnThis object indicates the sequence number (SN) of an AP.rw
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.3
hwWlanIDIndexedApTypeInfoThis object indicates the AP type.rw
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.4
hwWlanIDIndexedApNameThis object indicates the AP name.rw
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.5
hwWlanIDIndexedApGroupThis object indicates the group to which an AP belongs.rw
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.6
hwWlanIDIndexedApRunStateThis object indicates the AP state.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.10.1.7
hwWlanIDIndexedApSoftwareVersionThis object indicates the AP software version.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.8
hwWlanIDIndexedApHardwareVersionThis object indicates the AP hardware version.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.9
hwWlanIDIndexedApCpuTypeThis object indicates the CPU type of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.10
hwWlanIDIndexedApCpufrequencyThis object indicates the CPU frequency of an AP.Unit: MHz.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.11
hwWlanIDIndexedApMemoryTypeThis object indicates the memory type of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.12
hwWlanIDIndexedApDomainThis object indicates the AP domain.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.13
hwWlanIDIndexedApIpAddressThis object indicates the IP address of an AP.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.10.1.14
hwWlanIDIndexedApIpNetMaskThis object indicates the IP address mask of an AP.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.10.1.15
hwWlanIDIndexedApGatewayIpThis object indicates the gateway IP address of an AP.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.10.1.16
hwWlanIDIndexedApMemorySizeThis object indicates the memory size of an AP.Unit: MB.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.17
hwWlanIDIndexedApFlashSizeThis object indicates the flash memory size of an AP.Unit: MB.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.18
hwWlanIDIndexedApRunTimeThis object indicates the running time of an AP.Unit: tick.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.19
hwWlanIDIndexedApAdminOperThis object indicates administrative status of an AP.rw
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.10.1.20
hwWlanIDIndexedApDNSThis object indicates the AP DNS.ro
IpAddress
.1.3.6.1.4.1.2011.6.139.13.3.10.1.21
hwWlanIDIndexedApOnlineTimeThis object indicates online duration of an AP.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.22
hwWlanIDIndexedApSysSoftwareDescThis object indicates system software description of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.23
hwWlanIDIndexedApSysHardtwareDescThis object indicates system hardware description of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.24
hwWlanIDIndexedApSysManufactureThis object indicates the manufacturer of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.25
hwWlanIDIndexedApSysSoftwareNameThis object indicates software name of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.26
hwWlanIDIndexedApSysSoftwareVendorThis object indicates the manufacturer of the AP software.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.27
hwWlanIDIndexedApBomCodeThis object indicates the BOM code.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.28
hwWlanIDIndexedApIpv6AddressThis object indicates the IPv6 address.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.29
hwWlanIDIndexedApIpv6NetMaskThis object indicates the IPv6 address mask.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.30
hwWlanIDIndexedApGatewayIpv6This object indicates the IPv6 gateway.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.31
hwWlanIDIndexedApIpv6DNSThis object indicates the IPv6 DNS.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.32
hwWlanIDIndexedApProtectAcIPv6AddrThis object indicates the IPv6 address of the standby AC.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.33
hwWlanIDIndexedApBootCountTotalThis object indicates the total number of times an AP is restarted.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.34
hwWlanIDIndexedApBootCountPowerOffThis object indicates the number of times an AP is restarted due to a power failure.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.35
hwWlanIDIndexedApBootCountClearThis object clears the AP restart count.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.10.1.36
hwWlanIDIndexedApElectronicLabelThis object indicates the electronic label of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.37
hwWlanIDIndexedApWiredPortNumThis object indicates the total number of wired interfaces.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.38
hwWlanIDIndexedApWiredPortMtuThis object indicates the maximum transmit unit (MTU) of a wired interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.39
hwWlanIDIndexedApWiredPortMacThis object indicates the MAC address of a wired interface.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.10.1.40
hwWlanIDIndexedApMemoryUseRateThis object indicates the memory usage.Unit: %.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.41
hwWlanIDIndexedApCpuUseRateThis object indicates the CPU usage.Unit: %.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.42
hwWlanIDIndexedApFlashFreeSizeThis object indicates available space in the flash memory.Unit: KB.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.43
hwWlanIDIndexedApTemperatureThis object indicates the operating temperature.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.44
hwWlanIDIndexedApOnlineUserNumThis object indicates the number of online users.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.45
hwWlanIDIndexedApDualBandAssoc5gStaNumThis object indicates the number of dual-band terminals that access the 5 GHz radio.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.46
hwWlanIDIndexedApDualBandStaNumThis object indicates the number of STAs that support dual frequency bands.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.47
hwWlanIDIndexedApStaOnlineFailRatioThis object indicates STA online failure ratio on an AP.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.48
hwWlanIDIndexedApStaOfflineRatioThis object indicates STA offline ratio of an AP.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.49
hwWlanIDIndexedApStickyClientRatioThis object indicates the proportion of sticky STAs to all STAs.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.50
hwWlanIDIndexedApUpEthPortSpeedThis object indicates the rate of an upstream Ethernet interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.10.1.51
hwWlanIDIndexedApUpEthPortSpeedModeThis object indicates the rate mode of an upstream Ethernet interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.10.1.52
hwWlanIDIndexedApUpEthPortDuplexThis object indicates the duplex state of an upstream Ethernet interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.10.1.53
hwWlanIDIndexedApUpEthPortDuplexModeThis object indicates the duplex mode of an upstream Ethernet interface.ro
Enumeration
.1.3.6.1.4.1.2011.6.139.13.3.10.1.54
hwWlanIDIndexedApUpPortSpeedThis object indicates the real-time rate of an upstream interface.Unit: Kbps.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.55
hwWlanIDIndexedAPUpPortPERThis object indicates the packet error rate of an upstream interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.56
hwWlanIDIndexedEthportUpRateThis object indicates the upstream rate of an Ethernet interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.57
hwWlanIDIndexedEthportDownRateThis object indicates the downstream rate of an Ethernet interface.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.58
hwWlanIDIndexedApAirportUpTrafficThis object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.59
hwWlanIDIndexedApAirportDwTrafficThis object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.60
hwWlanIDIndexedApEthportDwTrafficThis object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.61
hwWlanIDIndexedApEthportUpTrafficThis object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.62
hwWlanIDIndexedApUpPortRecvPacketsThis object indicates the total number of frames received on an upstream interface, which is extended to 64 bits.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.10.1.63
hwWlanIDIndexedApUpPortSendPacketsThis object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.10.1.64
hwWlanIDIndexedApUpPortRecvBytesThis object indicates the total number of bytes received on an upstream interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.10.1.65
hwWlanIDIndexedApUpPortSendBytesThis object indicates the total number of bytes sent on an upstream interface.ro
Counter64
.1.3.6.1.4.1.2011.6.139.13.3.10.1.66
hwWlanIDIndexedCentralApIdThis object indicates the central AP ID.ro
Unsigned32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.67
hwWlanIDIndexedCentralApMacThis object indicates the MAC address of an central AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.10.1.68
hwWlanIDIndexedCentralApNameThis object indicates the central AP name.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.69
hwWlanIDIndexedApRowstatusThis object indicates the row status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.6.139.13.3.10.1.70
hwWlanIDIndexedApSDCardSizeThis object indicates the SD card size of an AP.Unit: MB.ro
Integer32
.1.3.6.1.4.1.2011.6.139.13.3.10.1.71
hwWlanIDIndexedAPLongitudeThis object indicates the longitude of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.72
hwWlanIDIndexedAPLatitudeThis object indicates the latitude of an AP.ro
OCTET STRING
.1.3.6.1.4.1.2011.6.139.13.3.10.1.73
hwWlanAPConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.4
hwWlanAPCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.4.1
hwWlanAPObjectGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.6.139.13.4.2
HUAWEI-WLAN-AP-MIB - SNMP MIB Reference | MIBs Explorer