HUAWEI-XPON-MIB
AI MIB Summary
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
The MIB module defines MIB objects which provides GPON and EPON management NMS interfaces.
Main OID:
hwXponDeviceMIB.1.3.6.1.4.1.2011.6.128
1548
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
1548 total| Object Name |
|---|
hwXponDeviceMIBThe MIB module defines MIB objects which provides GPON and EPON management NMS interfaces. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.128 |
hwXponDeviceObjectMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1 |
hwXponDeviceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1.1 |
hwXponDeviceGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1.1.1 |
hwXponDeviceAutoFindOntAgeThe aging time of the auto-found ONT, which can be 0s (indicating that the ONT will not aging) or a value from 100s to 300s.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.1.1 |
hwXponDeviceAutoFindIntervalIndicates the SN request interval, ranging from 1(s) to 10(s).rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.1.2 |
hwXponDeviceModeCfgSwitchThis object is used to change XPON management mode.
When xpon mode is changed from profile mode to distributing mode and there are xpon data or xpon board information in system,
the system will automatically save data and reboot,and will cause all configuration of XPON lost.
When the mode is changed from distributing mode to profile mode, the system will automatically save data and reboot. The operation
can not cause the configuration of XPON lost.
Options:
1. distributingmode(1) - XPON distributing mode
2. profilemode(2) - XPON profile moderw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.1.3 |
hwGponDeviceMulticastGemportIdThe special GEM port ID is used for the multicast service, ranging from 4000 to 4095.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.1.21 |
hwGponDeviceBaseGemportIdThe base GEM port is used when the board's car-mode is port-cos, ranging from 128 to 3872.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.1.22 |
hwGponDeviceMinimumBandwidthThe scalar is used to configure the minimum bandwidth of the T-CONTs in the system,
ranging from 384 to 1024.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.1.23 |
hwXponDeviceAutoDetectRogueOntNewThis object is used to open or close the switch of rogue ONT automatic detection.
Options:
1.on(1) - Open the switch of rogue ONT automatic detection
2.off(2) - Close the switch of rogue ONT automatic detection
The default value is off(2).rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.1.24 |
hwGponDeviceDbaBandwidthTypeThis object is used to select the type of bandwidth.
Options:
1.gpon(1) - Indicates that the type of bandwidth is GPON
2.ethernet(2) - Indicates that the type of bandwidth is ETH
The default value is gpon(1).rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.1.25 |
hwGponDeviceDbaAssignmentModeThis object is used to select the DBA assignment mode.
Options:
1.maxbandwidthusage(1) - Indicates that the usage of bandwidth is maximum
2.minloopdelay(2) - Indicates that the loop delay is minimum
3.manual(3) - Indicates that the DBA assignment mode is manual,this value can not set nowrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.1.26 |
hwEponDeviceCtcOuiIdThis object is used to set the Organizationally Unique Identifier.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.1.41 |
hwEponDeviceChangePasswordIntervalTimeThe interval time of ONT's password renew, ranging from 1(s) to 254(s).rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.1.42 |
hwXponDeviceControlObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1.1.2 |
hwGponDeviceOltControlInfoTableThe control table of the GPON OLT. The index of this table is ifIndex. SEQUENCE OF HwGponDeviceOltControlInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.21 |
hwGponDeviceOltControlInfoEntryThe control table of the GPON OLT. The index of this entry is ifIndex. HwGponDeviceOltControlInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.21.1 |
hwGponDeviceOltControlNearestThis is the fiber distance between the OLT and the nearest ONT.
For GPON, the fiber distance between the OLT and the nearest ONT
is 0 km to 40 km while the maximum fiber distance between the farthest
and the nearest ONTs is 20 km.
For XG-PON, the fiber distance between the OLT and the nearest ONT
is 0 km to 60 km while the maximum fiber distance between the farthest
and the nearest ONTs is 40 km.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.1 |
hwGponDeviceOltControlFarthestThis is the fiber distance between the OLT and the farthest ONT.
For GPON, the fiber distance between the OLT and the nearest ONT
is 0 km to 60 km while the maximum fiber distance between the farthest
and the nearest ONTs is 20 km.
For XG-PON, the fiber distance between the OLT and the nearest ONT
is 0 km to 100 km while the maximum fiber distance between the farthest
and the nearest ONTs is 40 km.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.2 |
hwGponDeviceOltControlDnFecEnabledThis object indicates the downstream FEC switch.
Options:
1. enable(1) - Enable the downstream FEC switch
2. disable(2) - Disable the downstream FEC switch
3. invalid(-1) - Indicates that the query fails or no information is detected
For GPON, the default value is disable(2).
For XG-PON, the default value is enable(1).rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.3 |
hwGponDeviceOltControlAutofindOntEnableThis object indicates the ONT auto find switch.
Options:
1. enable(1) - Enable the ONT auto find switch
2. disable(2) - Disable the ONT auto find switch
3. invalid(-1) - Indicates that the query fails or no information is detected
The default value is disable(2).rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.4 |
hwGponDeviceOltControlChangePasswordAgeThis object indicates the ONT password update period.
0 means no update, range: 0 or 5~1440 minutes.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.5 |
hwGponDeviceOltControlDesptThis object indicates the description of GPON port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.6 |
hwGponDeviceOltControlLeftBandWidthThis object indicates the untapped bandwidth of the port.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.7 |
hwGponDeviceOltControlMinBandwidthThis object indicates the minimum bandwidth of T-CONTs in the OLT port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.8 |
hwGponDeviceOltControlLaserSwitchThis object indicates the laser switch of the GPON port.
Options:
1. on(1) - Open the laser switch of the GPON port
2. off(2) - Close the laser switch of the GPON port
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.9 |
hwGponDeviceOltControlStatusThis object indicates the GPON port status in the OLT.
Options:
1. up(1) - Indicates that the GPON port is normal
2. down(2) - Indicates that the GPON port is faultro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.10 |
hwGponDeviceOltControlManualDetectRogueOntThis object indicates the switch of the rogue ONT manual detection.
Options:
1. startup(1) - Start up the switch of the rogue ONT manual detection
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.11 |
hwGponDeviceOltControlIlegalIncurRogueOntExtThis object is used to query whether there are Illegal incursionary rogue ONTs under port.
Options:
1. inexistent(0) - Indicates that there are not Illegal incursionary rogue ONTs under port
2. existent(1) - Indicates that there are Illegal incursionary rogue ONTs under port
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.12 |
hwGponDeviceOltControlOpticModuleStatusThis object indicates the optical module status on GPON port.
Options:
1. online(1) - Indicates that the optical module is online
2. offline(2) - Indicates that the optical module is offline
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.13 |
hwGponDeviceOltControlAvailableBandWidthThis object indicates the available bandwidth of the port.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.14 |
hwGponDeviceOltObjectOpticAlarmProfileNameThis object indicates the name of the optical alarm profile that is bound to the port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.15 |
hwGponDeviceOltControlOntNumThis object indicates the number of ONTs that are added to the port.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.16 |
hwGponDeviceOltLastUpTimeThis object indicates the time when the port last went online.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.17 |
hwGponDeviceOltLastDownTimeThis object indicates the time when the port last went offline.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.18 |
hwGponDeviceOltLastDownCauseThis object indicates the reason why the port last went offline.
Options:
1. los(1) - Loss of signal
2. opticModuleAbsence(2) - The optic module is absence
3. opticModuleFault(3) - The optic module is fault
4. opticPortClosed(4) - The optic port is closed
5. otherCause(-1) - Other causero Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.19 |
hwGponDeviceOltControlTcontNumCombinedThe number of the combined T-CONTs.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.20 |
hwGponDeviceOltControlTcontNumInCardThe number of T-CONTs in the card.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.21 |
hwGponDeviceOltControlEnergySavingFlagEnergy saving state of the GPON port.
Options:
1. yes (1) - The GPON port is in energy saving state
2. no (2) - The GPON port is not in energy saving statero Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.22 |
hwGponDeviceOltControlManualCheckRogueOntThis object indicates the switch of the rogue ONT manual check.
Options:
1. startup(1) - Start up the switch of the rogue ONT manual checked
2. invalid(-1) - Indicates that the query fails or no information is checkedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.23 |
hwGponDeviceOltControlPortResetThis parameter is used to reset the port.
Options:
1. reset(1) - Indicates that the port resets
2. invalid(-1) - Indicates that the query fails or no information is checkedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.24 |
hwGponOltOpticsModuleInfoTableThis table is used to query the information about the optical transceiver.
The index of this table is ifIndex. SEQUENCE OF HwGponOltOpticsModuleInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.22 |
hwGponOltOpticsModuleInfoEntryThis table is used to query the information about the optical transceiver.
The index of this entry is ifIndex. HwGponOltOpticsModuleInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.22.1 |
hwGponOltOpticsModuleInfoIdentifierThis object indicates the type of serial transceiver.
Options:
1. unknown(1) - Unknown or unspecified
2. gbic(2) - GBIC
3. solderedToMotherboard(3) - Module soldered to motherboard
4. sfp(4) - SFP or SFP Plus
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.1 |
hwGponOltOpticsModuleInfoExtIDThis object indicates the extended identifier of type of serial transceiver.
Options:
1. notSpecifiedOrNotCompliant(1) - Not specified or not compliant with a defined MOD_DEF
2. moddef1(2) - GBIC is compliant with MOD_DEF 1
3. moddef2(3) - GBIC is compliant with MOD_DEF 2
4. moddef3(4) - GBIC is compliant with MOD_DEF 3
5. byTwowireOnly(5) - GBIC/SFP function is defined by two-wire interface ID only
6. moddef5(6) - GBIC is compliant with MOD_DEF 5
7. moddef6(7) - GBIC is compliant with MOD_DEF 6
8. moddef7(8) - GBIC is compliant with MOD_DEF 7
9. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.2 |
hwGponOltOpticsModuleInfoConnectorThis object indicates the code for connector type.
Options:
1. unknown(1) - Unknown
2. sc(2) - SC
3. copperConnector1(3) - Fibre Channel Style 1 copper connector
4. copperConnector2(4) - Fibre Channel Style 2 copper connector
5. bnctnc(5) - BNC/TNC
6. coaxialHeaders(6) - Fibre Channel coaxial headers
7. fiberJack(7) - FiberJack
8. lc(8) - LC
9. mtrj(9) - MT-RJ
10. mu(10) - MU
11. sg(11) - SG
12. opticalPigtail(12) - Optical pigtail
13. hssdcII(13) - HSSDC II
14. copperPigtail(14) - Copper Pigtail
15. mpoParallelOptic(15) - MPO Parallel Optic
16. rj45(16) - RJ45
17. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.3 |
hwGponOltOpticsModuleInfoEncodingThis object indicates the code for serial encoding algorithm.
Options:
1. unspecified(1) - Unspecified
2. encodingMethod8B10B(2) - 8B10B
3. encodingMethod4B5B(3) - 4B5B
4. nrz(4) - NRZ
5. manchester(5) - Manchester
6. sonetScrambled(6) - SONET Scrambled
7. encodingMethod64B66B(7) - 64B66B
8. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.4 |
hwGponOltOpticsModuleInfoBrNominalThis object indicates the nominal bit rate, units of 100 MBits/sec.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.5 |
hwGponOltOpticsModuleInfoLength9MicronkmThis object indicates the link length supported for 9/125 micron fiber, units of 1000 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.6 |
hwGponOltOpticsModuleInfoLength9MicronThis object indicates the link length supported for 9/125 micron fiber, units of 100 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.7 |
hwGponOltOpticsModuleInfoLength50MicronThis object indicates the link length supported for 50/125 micron fiber, units of 10 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.8 |
hwGponOltOpticsModuleInfoLength62Micron5This object indicates the link length supported for 62.5/125 micron fiber, units of 10 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.9 |
hwGponOltOpticsModuleInfoLengthCopperThis object indicates the link length supported for copper, units of meters.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.10 |
hwGponOltOpticsModuleInfoVendorNameThis object indicates the SFP vendor name (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.11 |
hwGponOltOpticsModuleInfoVendorOUIThis object indicates the SFP vendor IEEE company ID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.12 |
hwGponOltOpticsModuleInfoVendorPNThis object indicates the part number provided by SFP vendor (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.13 |
hwGponOltOpticsModuleInfoVendorRevThis object indicates the revision level for part number provided by vendor (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.14 |
hwGponOltOpticsModuleInfoWaveLengthThis object indicates the laser wavelength, units of nm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.15 |
hwGponOltOpticsModuleInfoCcBaseThis object indicates the check code for Base ID Fields.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.16 |
hwGponOltOpticsModuleInfoOptionsIndicates which optional transceiver signals are implemented.
bit Description of option
10 Cooled laser transmitter
9 Power Level 2 requirement
8 Linear Receiver Output
7-6 Reserved
5 RATE_SELECT
4 TX_DISABLE
3 TX_FAULT
2 LOS (signal inverted from standard definition)
1 LOS (signal as defined in SFP MSA)
0 Reservedro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.17 |
hwGponOltOpticsModuleInfoBrMaxThis object indicates the upper bit rate margin, units of %.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.18 |
hwGponOltOpticsModuleInfoBrMinThis object indicates the lower bit rate margin, units of %.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.19 |
hwGponOltOpticsModuleInfoVendorSNThis object indicates the serial number provided by vendor (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.20 |
hwGponOltOpticsModuleInfoDateCodeThis object indicates manufacturing date code of the vendor (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.21 |
hwGponOltOpticsModuleInfoDiagnosticMonitoringTypeIndicates which type of diagnostic monitoring is implemented.
bit Description of Diagnostic Monitoring Type
7 Reserved
6 Digital diagnostic monitoring
5 Internally Calibrated
4 Externally Calibrated
3 Received power measurement type:(0 = OMA, 1 = Average)
2 Address change required
1-0 Reservedro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.22 |
hwGponOltOpticsModuleInfoEnhancedOptionsIndicates which optional enhanced features are implemented.
bit Description of Enhanced Options
7 Alarm/warning flags
6 TX_DISABLE control and monitoring
5 TX_FAULT monitoring
4 RX_LOS monitoring
3 RATE_SELECT control and monitoring
2 Application Select control
1 Rate Select control
0 Reservedro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.23 |
hwGponOltOpticsModuleInfoSFF8472ComplianceIndicates which revision of SFF-8472 the transceiver complies
Options:
1. undefined(1) - Not included or undefined
2. includesRev93SFF8472(2) - Includes functionality described in Rev 9.3
3. includesRev95SFF8472(3) - Includes functionality described in Rev 9.5
4. includesRev102SFF8472(4) - Includes functionality described in Rev 10.2
5. includesRev104SFF8472(5) - Includes functionality described in Rev 10.4
6. includesRev110SFF8472(6) - Includes functionality described in Rev 11.0
7. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.24 |
hwGponOltOpticsModuleInfoCcExtThis object indicates the check code for the Extended ID Fields.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.25 |
hwGponOltOpticsModuleInfoVendorSpecificThis object indicates the vendor Specific EEPROM.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.26 |
hwGponOltOpticsModuleXponTypeThis object indicates the type of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. gpon(2) - GPON
3. epon(3) - EPON
4. epon10g(4) - 10G EPON
5. gpon10g(5) - 10G GPON
6. wdmpon(6) - WDM PON
7. hybridpon(7) - Hybrid PON
8. gponepon(8) - GPON/EPON
9. xgspon(9) - XGS-PON
10.gponandxgpon(10) - GPON+XG-PON
11.gponandxgspon(11) - GPON+XGS-PON
12.twdmpon(15) - TWDM-PON
13.invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.27 |
hwGponOltOpticsModuleXponSubTypeThis object indicates the sub type of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. classbplus(101) - CLASS B+
3. classcplus(102) - CLASS C+
4. classb(103) - CLASS B
5. classcplusplus(104) - CLASS C++
6. classcd(105) - CLASS D
7. px20(201) - PX20
8. px20plus(202) - PX20+
9. px20plusplus(203) - PX20++
10. pr30(301) - PR30
11.pr20(302) - PR20
12.prx30(303) - PRX30
13.prx20(304) - PRX20
14.prx40(305) - PRX40
15.pr40(306) - PR40
16.prx30e(307) - PRX30-E
17.prx40e(308) - PRX40-E
18.pr30plus(309) - PR30+
19.n2a(405) - N2a
20.n2b(406) - N2b
21.n1(407) - N1
22.e1(408) - E1
23.e2a(409) - E2a
24.e2b(410) - E2b
25.d1(411) - D1
26.d2(412) - D2
27.n2(413) - N2
28.e2(414) - E2
29.classbPlusAndPx20Plus(501) - GPON CLASS B+/EPON PX20+
30.classbAndPx20(502) - GPON CLASS B/EPON PX20
31.invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.28 |
hwGponOltOpticsModuleXponUsedTypeThis object indicates the application scenario of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. olt(2) - OLT
3. ont(3) - ONT
4. onu(4) - ONU
5. catvtriplex(5) - CATV TriPlex
6. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.29 |
hwGponOltOpticsModuleXponEncapsulationTypeThis object indicates the encapsulation information about the optical transceiver.
Options:
1. unknown(1) - Unknown
2. sff2x5(2) - SFF 2x5
3. sff2x10(3) - SFF 2x10
4. sfp(4) - SFP
5. xfp(5) - XFP
6. lxfp(6) - LXFP
7. bosaonboard(7) - BOSA ON BOARD
8. sfpplus(8) - SFP+
9. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.30 |
hwGponOltOpticsModuleInfoPartNumIndicate the part number of a optical module provided by Huawei.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.22.1.31 |
hwGponOltOpticsDdmInfoTableThis table is used to query the diagnostic information about the optical transceiver of the GPON port.
The index of this table is ifIndex. SEQUENCE OF HwGponOltOpticsDdmInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.23 |
hwGponOltOpticsDdmInfoEntryThis table is used to query the diagnostic information about the optical transceiver of the GPON port.
The index of this entry is ifIndex. HwGponOltOpticsDdmInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.23.1 |
hwGponOltOpticsDdmInfoTemperatureThis object indicates the optics temperature, units of C(centigrade).ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.23.1.1 |
hwGponOltOpticsDdmInfoSupplyVoltageThis object indicates the supply voltage, units of 0.01V.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.23.1.2 |
hwGponOltOpticsDdmInfoTxBiasCurrentThis object indicates the optics current, units of mA.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.23.1.3 |
hwGponOltOpticsDdmInfoTxPowerThis object indicates the optics send power, units of 0.01dBm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.23.1.4 |
hwGponOltOpticsDdmInfoRxPowerThis object indicates the optics received power, units of 0.01dBm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.23.1.5 |
hwEponOltXFPOpticsModuleInfoTableThis table is used to query the optics module informationof the 10G EPON port.
The index of this table is ifIndex. SEQUENCE OF HwEponOltXFPOpticsModuleInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.24 |
hwEponOltXFPOpticsModuleInfoEntryThis table is used to query the optics module informationof the 10G EPON port.
The index of this entry is ifIndex. HwEponOltXFPOpticsModuleInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.24.1 |
hwEponOltXFPOpticsModuleInfoIdentifierThis object indicates the type of serial transceiver.
Options:
1. unknown(0) - Unknown or unspecified
2. gbic(1) - GBIC
3. solderedToMotherboard(2) - Module soldered to motherboard
4. sfp(3) - SFP
5. pin300XBI(4) - PIN300XBI
6. xenpak(5) - XENPAK
7. xfp(6) - XFP
8. xff(7) - XFF
9. xfep(8) - XFEP
10. xpak(9) - XPAK
11. x2(10) - X2
12. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.1 |
hwEponOltXFPOpticsModuleInfoExtCLEICodeThis object indicates the extclei code.
Options:
1. nonExtCLEICode(0) - No CLEI code present in Table 02h
2. extCLEICode(1) - CLEI code present in Table 02h
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.2 |
hwEponOltXFPOpticsModuleInfoExtTXRefClockThis object indicates the txref clock.
Options:
1. nonExtTXRefClock(0) - TX Ref Clock Input Not Required
2. extTXRefClock(1) - TX Ref Clock Input Required
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.3 |
hwEponOltXFPOpticsModuleInfoExtCDRFuncThis object indicates the CDR function.
Options:
1. nonExtCDRFunc(0) - Non-CDR version of XFP
2. extCDRFunc(1) - Module with CDR function
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.4 |
hwEponOltXFPOpticsModuleInfoExtPowerLevelThis object indicates the power level.
Options:
1. extPowerLevel1(0) - Power Level 1 Module (1.5 W max. power dissipation.)
2. extPowerLevel2(1) - Power Level 2 Module (2.5W Max)
3. extPowerLevel3(2) - Power Level 3 Module (3.5W max. power dissipation.)
4. extPowerLevel4(3) - Power Level 4 Module (>3.5W max. power dissipation.)
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.5 |
hwEponOltXFPOpticsModuleInfoConnectorThis object indicates the code for connector type.
Options:
1. unknown(1) - Unknown
2. sc(2) - SC
3. copperConnector1(3) - Fibre Channel Style 1 copper connector
4. copperConnector2(4) - Fibre Channel Style 2 copper connector
5. bnctnc(5) - BNC/TNC
6. coaxialHeaders(6) - Fibre Channel coaxial headers
7. fiberJack(7) - FiberJack
8. lc(8) - LC
9. mtrj(9) - MT-RJ
10. mu(10) - MU
11. sg(11) - SG
12. opticalPigtail(12) - Optical pigtail
13. hssdcII(13) - HSSDC II
14. copperPigtail(14) - Copper Pigtail
15. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.6 |
hwEponOltXFPOpticsModuleInfoEncodingRZThis object indicates the EncodingRZ.
Options:
1. nonEncodingRZ(0) - Encoding Don't Support RZ
2. encodingRZ(1) - Encoding Support RZ
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.7 |
hwEponOltXFPOpticsModuleInfoEncodingNRZThis object indicates the EncodingNRZ.
Options:
1. nonEncodingNRZ(0) - Encoding Don't Support NRZ
2. encodingNRZ(1) - Encoding Support NRZ
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.8 |
hwEponOltXFPOpticsModuleInfoEncoding8B10BThis object indicates the Encoding8B10B.
Options:
1. nonEncoding8B10B(0) - Encoding Don't Support 8B10B
2. encoding8B10B(1) - Encoding Support 8B10B
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.9 |
hwEponOltXFPOpticsModuleInfoEncoding64BThis object indicates the Encoding64B.
Options:
1. nonEncoding64B(0) - Encoding Don't Support 64B/66B
2. encoding64B(1) - Encoding Support 64B/66B
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.10 |
hwEponOltXFPOpticsModuleInfoBrMinMinimum bit rate, units of 100 MBits/s.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.11 |
hwEponOltXFPOpticsModuleInfoBrMaxMaximum bit rate, units of 100 MBits/s.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.12 |
hwEponOltXFPOpticsModuleInfoSupportLenSMFLink length supported for SMF fiber in km.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.13 |
hwEponOltXFPOpticsModuleInfoSupportLenE50umLink length supported for EBW 50/125 um fiber, units of 2 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.14 |
hwEponOltXFPOpticsModuleInfoSupportLen50umLink length supported for 50/125 um fiber, units of 1 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.15 |
hwEponOltXFPOpticsModuleInfoSupportLen62p5umLink length supported for 62.5/125 um fiber, units of 1 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.16 |
hwEponOltXFPOpticsModuleInfoSupportLenCopperLink length supported for copper, units of 1m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.17 |
hwEponOltXFPOpticsModuleInfoTransmitterSupportThis object indicates the transmitter support.
Options:
1. nonTunable(0) - Transmitter Not Support Tunable
2. tunable(1) - Transmitter Support Tunable
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.18 |
hwEponOltXFPOpticsModuleInfoDetectorThis object indicates the transmitter support.
Options:
1. pin(0) - PIN
2. apd(1) - APD
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.19 |
hwEponOltXFPOpticsModuleInfoWavelengthControlThis object indicates the wavelength control.
Options:
1. nonSupport(0) - Wavelength control NonSupport
2. support(1) - Wavelength control Support
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.20 |
hwEponOltXFPOpticsModuleInfoCooledTransmitterDeviceThis object indicates the cooled transmitter device.
Options:
1. nonSupport(0) - Cooled transmitter device NonSupport
2. support(1) - Cooled transmitter device Support
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.21 |
hwEponOltXFPOpticsModuleInfoTransmitterTechnologySupportThis object indicates the transmitter technology support.
Options:
1. vCSEL850(0) - vCSEL850
2. vCSEL1310(1) - vCSEL1310
3. vCSEL1550(2) - vCSEL1550
4. fP1310(3) - fP1310
5. dFB1310(4) - dFB1310
6. dFB1550(5) - dFB1550
7. eML1310(6) - eML1310
8. eML1550(7) - eML1550
9. cOPPER(8) - cOPPER
10. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.22 |
hwEponOltXFPOpticsModuleInfoVendorNameThis object indicates the XFP vendor name (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.23 |
hwEponOltXFPOpticsModuleInfoSupportXFIModeThis object indicates the XFI mode.
Options:
1. nonSupportXFIMode(0) - Don't Support XFI Loopback Mode
2. supportXFIMode(1) - XFI Loopback Mode Supported
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.24 |
hwEponOltXFPOpticsModuleInfoSupportLinesideModeThis object indicates the XFI mode.
Options:
1. nonSupportLinesideMode(0) - Don't Support Lineside Loopback Mode
2. supportLinesideMode(1) - Lineside Loopback Mode Supported
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.25 |
hwEponOltXFPOpticsModuleInfoMaxBitRateSupportedByCDRThis object indicates the max bit rate by CDR.
Options:
1. cDRNosupport(0) - CDR not support
2. maxBitRateSupportedByCDR11p1(1) - CDR support for 11.1 Gb/s
3. maxBitRateSupportedByCDR10p7(3) - CDR support for 10.7 Gb/s
4. maxBitRateSupportedByCDR10p5(7) - CDR support for 10.5 Gb/s
5. maxBitRateSupportedByCDR10p3(15) - CDR support for 10.3 Gb/s
6. maxBitRateSupportedByCDR9p95(31) - CDR support for 9.95 Gb/s
7. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.26 |
hwEponOltXFPOpticsModuleInfoVendorOUIThis object indicates the Vendor OUI.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.27 |
hwEponOltXFPOpticsModuleInfoVendorPNThis object indicates the Vendor PN.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.28 |
hwEponOltXFPOpticsModuleInfoVendorRevThis object indicates the Vendor rev.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.29 |
hwEponOltXFPOpticsModuleInfoF51This object indicates the Wavelength.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.30 |
hwEponOltXFPOpticsModuleInfoWaveToleranceThis object indicates the WaveTolerance.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.31 |
hwEponOltXFPOpticsModuleInfoMaxCaseTemperatureThis object indicates the Maximum Case Temperature in Degrees C.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.32 |
hwEponOltXFPOpticsModuleInfoCcbaseThis object indicates the Cc_base.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.33 |
hwEponOltXFPOpticsModuleInfoMaxDissipationThis object indicates the Maximum Power Dissipation.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.34 |
hwEponOltXFPOpticsModuleInfoMaxDissipationPowerDownModeThis object indicates the Maximum Total Power Dissipation in Power Down Mode.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.35 |
hwEponOltXFPOpticsModuleInfoMaximum5P0VSupplyThis object indicates the Maximum current required by +5V Supply.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.36 |
hwEponOltXFPOpticsModuleInfoMaximum3P3VSupplyThis object indicates the Maximum current required by +3.3V Supply.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.37 |
hwEponOltXFPOpticsModuleInfoMaximum1P8VSupplyThis object indicates the Maximum current required by +1.8V Supply.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.38 |
hwEponOltXFPOpticsModuleInfoMaximum5P2VSupplyThis object indicates the Maximum current required by -5.2V Supply.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.39 |
hwEponOltXFPOpticsModuleInfoVendorSNThis object indicates the Vendor SN.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.40 |
hwEponOltXFPOpticsModuleInfoDateCodeThis object indicates the Date code.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.41 |
hwEponOltXFPOpticsModuleInfoDiagnoMonitorPowerMeasureThis object indicates the Received power measurement type.
Options:
1. supportOMA(0) - OMA
2. supportAveragePower(1) - Average Power
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.42 |
hwEponOltXFPOpticsModuleInfoDiagnoMonitorTypeFECBERThis object indicates the Module Respond to FEC BER.
Options:
1. nonSupportBER(0) - No BER Support
2. supportBER(1) - BER Support
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.43 |
hwEponOltXFPOpticsModuleInfoEnhancedOptionsIndicates which optional enhanced features are implemented.
bit Description of Enhanced Options
7 Module Supports Optional VPS
6 Optional Soft TX_DISABLE implemented
5 Optional Soft P_down implemented
4 Supports VPS LV regulator mode
3 Supports VPS bypassed regulator Mode
2 Active FEC control functions implemented
1 Wavelength tunability implemented
0 Optional CMU Support Mode
invalid(-1) - Indicates that the query fails or no information is detectedro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.44 |
hwEponOltXFPOpticsModuleInfoAuxInputOneThis object indicates the optics Aux Input One.
Options:
1. auxInputType1(0) - Auxiliary monitoring not implemented
2. auxInputType2(1) - APD Bias Voltage
3. auxInputType3(2) - 1G Tx Bias Current
4. auxInputType4(3) - TEC Current (mA)
5. auxInputType5(4) - Laser Temperature
6. auxInputType6(5) - Laser Wavelength
7. auxInputType7(6) - +5V Supply Voltage
8. auxInputType8(7) - 1G Tx Power
9. auxInputType9(8) - +1.8V Supply Voltage
10. auxInputType10(9) - -5.2V Supply Voltage
11. auxInputType11(10) - +5V Supply Current
12. auxInputType14(13) - +3.3V Supply Current
13. auxInputType15(14) - +1.8V Supply Current
14. auxInputType16(15) - -5.2V Supply Current
15. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.45 |
hwEponOltXFPOpticsModuleInfoAuxInputTwoThis object indicates the optics Aux Input two.
Options:
1. auxInputType1(0) - Auxiliary monitoring not implemented
2. auxInputType2(1) - APD Bias Voltage
3. auxInputType3(2) - 1G Tx Bias Current
4. auxInputType4(3) - TEC Current (mA)
5. auxInputType5(4) - Laser Temperature
6. auxInputType6(5) - Laser Wavelength
7. auxInputType7(6) - +5V Supply Voltage
8. auxInputType8(7) - 1G Tx Power
9. auxInputType9(8) - +1.8V Supply Voltage
10. auxInputType10(9) - -5.2V Supply Voltage
11. auxInputType11(10) - +5V Supply Current
12. auxInputType14(13) - +3.3V Supply Current
13. auxInputType15(14) - +1.8V Supply Current
14. auxInputType16(15) - -5.2V Supply Current
15. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.46 |
hwEponOltXFPOpticsModuleInfoCCEXTThis object indicates the CC_EXT .ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.47 |
hwEponOltXFPOpticsModuleInfoWavelengthFor2d5GThis object indicates the Wavelength for 2.5G.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.48 |
hwEponOltXFPOpticsModuleInfoWavelengthFor1d25GThis object indicates the Wavelength for 1.25G.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.49 |
hwEponOltXFPOpticsModuleInfoVendorSpecificThis object indicates the Vendor specific.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.50 |
hwEponOltXFPOpticsModuleXponTypeThis object indicates the module type.
Options:
1. unknown(1) - Unknown
2. gpon(2) - GPON
3. epon(3) - EPON
4. epon10g(4) - 10G EPON
5. gpon10g(5) - 10G GPON
6. wdmpon(6) - WDM PON
7. hybridpon(7) - Hybrid PON
8. gponepon(8) - GPON/EPON
9. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.51 |
hwEponOltXFPOpticsModuleXponSubTypeThis object indicates the sub module type.
Options:
1. unknown(1) - Unknown
2. classbplus(101) - CLASS B+
3. classcplus(102) - CLASS C+
4. classb(103) - CLASS B
5. classcplusplus(104) - CLASS C++
6. px20(201) - PX20
7. px20plus(202) - PX20+
8. px20plusplus(203) - PX20++
9. pr30(301) - PR30
10.pr20(302) - PR20
11.prx30(303) - PRX30
12.prx20(304) - PRX20
13.prx40(305) - PRX40
14.pr40(306) - PR40
15.prx30e(307) - PRX30E
16.prx40e(308) - PRX40E
17.pr30plus(309) - PR3PLUS
18.n2a(405) - N2a
19.n2b(406) - N2b
20.n1(407) - N1
21.e1(408) - E1
22.e2a(409) - E2a
23.e2b(410) - E2b
24.invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.52 |
hwEponOltXFPOpticsModuleXponUsedTypeThis object indicates the application scenario of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. olt(2) - OLT
3. ont(3) - ONT
4. onu(4) - ONU
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.53 |
hwEponOltXFPOpticsModuleXponEncapsulationTypeThis object indicates the encapsulation information about the optical transceiver.
Options:
1. unknown(1) - Unknown
2. sff2x5(2) - SFF 2x5
3. sff2x10(3) - SFF 2x10
4. sfp(4) - SFP
5. xfp(5) - XFP
6. lxfp(6) - LXFP
7. bosaonboard(7) - BOSA ON BOARD
8. sfpplus(8) - SFP+
9. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.54 |
hwEponOltXFPOpticsModuleXponTemperatureLevelThis object indicates the application scenario of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. commercial(2) - commercial
3. industry(3) - industry
4. expandtemperature(4) - expand temperature
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.55 |
hwEponOltXFPOpticsModuleXponOPMprecisionThis object indicates the OPM precision.
Options:
1. unknown(1) - Unknown
2. db3(2) - 3db
3. db1(3) - 1db
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.56 |
hwEponDeviceOltControlInfoTableThis table implements the control of the EPON port. The index of this table is ifIndex. SEQUENCE OF HwEponDeviceOltControlInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.31 |
hwEponDeviceOltControlInfoEntryThis table implements the control of the EPON port. The index of this entry is ifIndex. HwEponDeviceOltControlInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.31.1 |
hwEponDeviceOltControlfarthestThis object indicates the fiber distance between the OLT and the farthest ONT
EPON: 0-40 km
10 Gb/s EPON: 0-60 kmrw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.1 |
hwEponDeviceOltControlAutofindOntEnableThis object indicates the ONT auto find switch.
Options:
1. enable(1) - Enable the ONT auto find switch
2. disable(2) - Disable the ONT auto find switch
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.2 |
hwEponDeviceOltControlDesptThis object indicates the description of the EPON port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.3 |
hwEponDeviceOltControlLaserSwitchThis object indicates the laser switch of the EPON port.
Options:
1. on(1) - Open the laser switch of the EPON port
2. off(2) - Close the laser switch of the EPON port
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.4 |
hwEponDeviceOltControlStatusThis object indicates the EPON port status in the OLT:
Options:
1. up(1) - Indicates that the EPON port is normal
2. down(2) - Indicates that the EPON port is faultro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.5 |
hwEponDeviceOltControlUpStreamBandWidthThis object indicates the up-stream bandwidth of EPON port.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.6 |
hwEponDeviceOltControlDownStreamBandWidthThis object indicates the down-stream bandwidth of EPON port.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.7 |
hwEponDeviceOltControlOpticAlarmProfileNameThis object indicates the short delay switch status that is saved in the database of the OLT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.8 |
hwEponDeviceOltLowTimeLapseSwitchThis object is used to query the short delay switch status that is saved in the database of the OLT.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.9 |
hwEponDeviceOltEffectiveFlagThis object is the flag indicating whether the buffer function takes effect immediately.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.10 |
hwEponOltLowTimeLapseStatusThis object indicates the status of the EPON low time switch.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.11 |
hwEponDeviceOltControlOntNumThis object indictates the number of ONTs that are added to the port.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.12 |
hwEponDeviceOltControlVlanTagModeThis object indicates the configuration function of the VLAN tag mode of the PON port.
Options:
1. tagbasedont(1) - Tag-based-ont
2. tagbasedvlan(2) - Tag-based-vlan
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.13 |
hwEponDeviceOltLastUpTimeThis object indicates the time when the port last goes online.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.14 |
hwEponDeviceOltLastDownTimeThis object indicates the time when the port last goes offline.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.15 |
hwEponDeviceOltLastDownCauseThis object indicates the reason why the port last goes offline.
Options:
1. los(1) - Loss of signal
2. opticModuleAbsence(2) - The optic module is absence
3. opticModuleFault(3) - The optic module is fault
4. opticPortClosed(4) - The optic port is closed
5. otherCause(-1) - Other causero Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.16 |
hwEponDeviceOltControlLeftBandWidthThis object indicates the untapped bandwidth of 1G upstream ONT's port, unit Kbps.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.17 |
hwEponDeviceOltControlAvailableBandWidthThis object indicates the available bandwidth of 1G upstream ONT's port, unit Kbps.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.18 |
hwEponDeviceOltControlManualDetectRogueOntThis object indicates the switch of the rogue ONT manual detection.
Options:
1. startup(1) - Starts up the switch of the rogue ONT manual detection
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.19 |
hwEponDeviceOltRogueOntExistThis object is used to query whether there are Illegal incursionary rogue ONTs under port.
Options:
1. inexistent(0) - Indicates that there are not Illegal incursionary rogue ONTs under port
2. existent(1) - Indicates that there are Illegal incursionary rogue ONTs under portro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.20 |
hwEponDeviceOltLeftBandWidth10GUpstreamThis object indicates the untapped bandwidth of 10G upstream ONT's port, unit Kbps.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.21 |
hwEponDeviceOltAvailableBandWidth10GUpstreamThis object indicates the available bandwidth of 10G upstream ONT's port, unit Kbps.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.22 |
hwEponDeviceOltControlAlarmProfileNameThis object indicates the name of the alarm profile that is bound to the EPON port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.23 |
hwEponDeviceOltControlWarningProfileNameThis object indicates the name of the warning profile that is bound to the EPON port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.24 |
hwEponDeviceOltControlEnergySavingFlagEnergy saving state of the EPON port.
Options:
1. yes (1) - The EPON port is in energy saving state
2. no (2) - The EPON port is not in energy saving statero Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.25 |
hwEponDeviceOltControlManualCheckRogueOntThis object indicates the switch of the rogue ONT manual check.
Options:
1. startup(1) - Start up the switch of the rogue ONT manual checked
2. invalid(-1) - Indicates that the query fails or no information is checkedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.26 |
hwEponDeviceOltControlPortResetThis parameter is used to reset the port.
Options:
1. reset(1) - Indicates that the port resets
2. invalid(-1) - Indicates that the query fails or no information is checkedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.27 |
hwEponOltOpticsModuleInfoTableShow the optics module information. The index of this table is ifIndex. SEQUENCE OF HwEponOltOpticsModuleInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.32 |
hwEponOltOpticsModuleInfoEntryShow the optics module information. The index of this entry is ifIndex. HwEponOltOpticsModuleInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.32.1 |
hwEponOltOpticsModuleInfoIdentifierThis object indicates the type of serial transceiver.
Options:
1. unknown(1) - Unknown or unspecified
2. gbic(2) - GBIC
3. solderedToMotherboard(3) - Module soldered to motherboard
4. sfp(4) - SFP or SFP Plus
5. invalid (-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.1 |
hwEponOltOpticsModuleInfoExtIDThis object indicates the extended identifier of type of serial transceiver.
Options:
1. notSpecifiedOrNotCompliant(1) - Not specified or not compliant with a defined MOD_DEF
2. moddef1(2) - GBIC is compliant with MOD_DEF 1
3. moddef2(3) - GBIC is compliant with MOD_DEF 2
4. moddef3(4) - GBIC is compliant with MOD_DEF 3
5. byTwowireOnly(5) - GBIC/SFP function is defined by two-wire interface ID only
6. moddef5(6) - GBIC is compliant with MOD_DEF 5
7. moddef6(7) - GBIC is compliant with MOD_DEF 6
8. moddef7(8) - GBIC is compliant with MOD_DEF 7
9. invalid (-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.2 |
hwEponOltOpticsModuleInfoConnectorThis object indicates the code for connector type.
Options:
1. unknown(1) - Unknown
2. sc(2) - SC
3. copperConnector1(3) - Fibre Channel Style 1 copper connector
4. copperConnector2(4) - Fibre Channel Style 2 copper connector
5. bnctnc(5) - BNC/TNC
6. coaxialHeaders(6) - Fibre Channel coaxial headers
7. fiberJack(7) - FiberJack
8. lc(8) - LC
9. mtrj(9) - MT-RJ
10. mu(10) - MU
11. sg(11) - SG
12. opticalPigtail(12) - Optical pigtail
13. hssdcII(13) - HSSDC II
14. copperPigtail(14) - Copper Pigtail
15. mpoParallelOptic(15) - MPO Parallel Optic
16. rj45(16) - RJ45
17. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.3 |
hwEponOltOpticsModuleInfoEncodingThis object indicates the code for serial encoding algorithm.
Options:
1. unspecified(1) - Unspecified
2. encodingMethod8B10B(2) - 8B10B
3. encodingMethod4B5B(3) - 4B5B
4. nrz(4) - NRZ
5. manchester(5) - Manchester
6. sonetScrambled(6) - SONET Scrambled
7. encodingMethod64B66B(7) - 64B66B
8. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.4 |
hwEponOltOpticsModuleInfoBrNominalThis object indicates the nominal bit rate, units of 100 MBits/sec.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.5 |
hwEponOltOpticsModuleInfoLength9MicronkmThis object indicates the link length supported for 9/125 micron fiber, units of 1000 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.6 |
hwEponOltOpticsModuleInfoLength9MicronThis object indicates the link length supported for 9/125 micron fiber, units of 100 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.7 |
hwEponOltOpticsModuleInfoLength50MicronThis object indicates the link length supported for 50/125 micron fiber, units of 10 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.8 |
hwEponOltOpticsModuleInfoLength62Micron5This object indicates the link length supported for 62.5/125 micron fiber, units of 10 m.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.9 |
hwEponOltOpticsModuleInfoLengthCopperThis object indicates the link length supported for copper, units of meters.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.10 |
hwEponOltOpticsModuleInfoVendorNameThis object indicates the SFP vendor name (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.11 |
hwEponOltOpticsModuleInfoVendorOUIThis object indicates the SFP vendor IEEE company ID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.12 |
hwEponOltOpticsModuleInfoVendorPNThis object indicates the part number provided by SFP vendor (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.13 |
hwEponOltOpticsModuleInfoVendorRevThis object indicates the revision level for part number provided by vendor (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.14 |
hwEponOltOpticsModuleInfoWaveLengthThis object indicates the laser wavelength, units of nm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.15 |
hwEponOltOpticsModuleInfoCcBaseThis object indicates the check code for Base ID Fields.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.16 |
hwEponOltOpticsModuleInfoOptionsIndicates which optional transceiver signals are implemented.
bit Description of option
10 Cooled laser transmitter
9 Power Level 2 requirement
8 Linear Receiver Output
7-6 Reserved
5 RATE_SELECT
4 TX_DISABLE
3 TX_FAULT
2 LOS (signal inverted from standard definition)
1 LOS (signal as defined in SFP MSA)
0 Reservedro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.17 |
hwEponOltOpticsModuleInfoBrMaxThis object indicates the upper bit rate margin, units of %.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.18 |
hwEponOltOpticsModuleInfoBrMinThis object indicates the lower bit rate margin, units of %.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.19 |
hwEponOltOpticsModuleInfoVendorSNThis object indicates the serial number provided by vendor (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.20 |
hwEponOltOpticsModuleInfoDateCodeThis object indicates manufacturing date code of the vendor (ASCII).ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.21 |
hwEponOltOpticsModuleInfoDiagnosticMonitoringTypeIndicates which type of diagnostic monitoring is implemented.
bit Description of Diagnostic Monitoring Type
7 Reserved
6 Digital diagnostic monitoring
5 Internally Calibrated
4 Externally Calibrated
3 Received power measurement type:(0 = OMA, 1 = Average)
2 Address change required
1-0 Reservedro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.22 |
hwEponOltOpticsModuleInfoEnhancedOptionsIndicates which optional enhanced features are implemented.
bit Description of Enhanced Options
7 Alarm/warning flags
6 TX_DISABLE control and monitoring
5 TX_FAULT monitoring
4 RX_LOS monitoring
3 RATE_SELECT control and monitoring
2 Application Select control
1 Rate Select control
0 Reservedro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.23 |
hwEponOltOpticsModuleInfoSFF8472ComplianceIndicates which revision of SFF-8472 the transceiver complies
Options:
1. undefined(1) - Not included or undefined
2. includesRev93SFF8472(2) - Includes functionality described in Rev 9.3
3. includesRev95SFF8472(3) - Includes functionality described in Rev 9.5
4. includesRev102SFF8472(4) - Includes functionality described in Rev 10.2
5. includesRev104SFF8472(5) - Includes functionality described in Rev 10.4
6. includesRev110SFF8472(6) - Includes functionality described in Rev 11.0
7. invalid (-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.24 |
hwEponOltOpticsModuleInfoCcExtThis object indicates the check code for the Extended ID Fields.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.25 |
hwEponOltOpticsModuleInfoVendorSpecificThis object indicates the vendor Specific EEPROM.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.26 |
hwEponOltOpticsModuleXponTypeThis object indicates the type of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. gpon(2) - GPON
3. epon(3) - EPON
4. epon10g(4) - 10G EPON
5. gpon10g(5) - 10G GPON
6. wdmpon(6) - WDM PON
7. hybridpon(7) - Hybrid PON
8. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.27 |
hwEponOltOpticsModuleXponSubTypeThis object indicates the sub type of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. classbplus(101) - CLASS B+
3. classcplus(102) - CLASS C+
4. classb(103) - CLASS B
5. classcplusplus(104) - CLASS C++
6. px20(201) - PX20
7. px20plus(202) - PX20+
8. px20plusplus(203) - PX20++
9. pr30(301) - PR30
10.pr20(302) - PR20
11.prx30(303) - PRX30
12.prx20(304) - PRX20
13.prx40(305) - PRX40
14.pr40(306) - PR40
15.prx30e(307) - PRX30-E
16.prx40e(308) - PRX40-E
17.pr30plus(309) - PR30+
18.n2a(405) - N2a
19.n2b(406) - N2b
20.n1(407) - N1
21.e1(408) - E1
22.e2a(409) - E2a
23.e2b(410) - E2b
24.invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.28 |
hwEponOltOpticsModuleXponUsedTypeThis object indicates the application scenario of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. olt(2) - OLT
3. ont(3) - ONT
4. onu(4) - ONU
5.invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.29 |
hwEponOltOpticsModuleXponEncapsulationTypeThis object indicates the encapsulation information about the optical transceiver.
Options:
1. unknown(1) - Unknown
2. sff2x5(2) - SFF 2x5
3. sff2x10(3) - SFF 2x10
4. sfp(4) - SFP
5. xfp(5) - XFP
6. lxfp(6) - LXFP
7. bosaonboard(7) - BOSA ON BOARD
8.invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.32.1.30 |
hwEponOltOpticsDdmInfoTableThis table is used to query the diagnostic information about the optical transceiver of the EPON port.
The index of this table is ifIndex. SEQUENCE OF HwEponOltOpticsDdmInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.33 |
hwEponOltOpticsDdmInfoEntryThis table is used to query the diagnostic information about the optical transceiver of the EPON port.
The index of this entry is ifIndex. HwEponOltOpticsDdmInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.33.1 |
hwEponOltOpticsDdmInfoTemperatureThis object indicates the optics temperature, units of C(centigrade).ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.33.1.1 |
hwEponOltOpticsDdmInfoSupplyVoltageThis object indicates the supply voltage, units of 0.01V.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.33.1.2 |
hwEponOltOpticsDdmInfoTxBiasCurrentThis object indicates the optics current, units of mA.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.33.1.3 |
hwEponOltOpticsDdmInfoTxPowerThis object indicates the optics send power, units of 0.01dBm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.33.1.4 |
hwEponOltOpticsDdmInfoRxPowerThis object indicates the optics receive power, units of 0.01dBm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.33.1.5 |
hwXponOntLoadSelectTableIt is used to add ont to loading list and query the loading state for ONT.
The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. SEQUENCE OF HwXponOntLoadSelectEntry .1.3.6.1.4.1.2011.6.128.1.1.2.41 |
hwXponOntLoadSelectEntryIt is used to add ont to loading list and query the loading state for ONT.
The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex. HwXponOntLoadSelectEntry .1.3.6.1.4.1.2011.6.128.1.1.2.41.1 |
hwXponDeviceOntIndexThis object indicates the ONT ID, range: 0~255.
The value of 255 indicates that ONT ID is invalid or ignored in process of ont loading. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.41.1.1 |
hwXponOntLoadSelectStateThis object indicates the loading state of the ONT.
Options:
1. ready(1) - Indicates that the loading state of the ONT is ready
2. loading(2) - Indicates that the loading state of the ONT is loading
3. success(3) - Indicates that the loading state of the ONT is success
4. fail(4) - Indicates that the loading state of the ONT is fail
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.41.1.2 |
hwXponOntLoadSelectProgressThis object indicates the loading progress of the ONTro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.41.1.3 |
hwXponOntLoadSelectRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.41.1.4 |
hwXponOntLoadSelectPriorityThis object is used to set the priority of an ONT loading task.
A smaller value represents a higher priority.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.41.1.5 |
hwXponOntLoadSelectActiveModeThis object is used to configure the effect mode of an loaded ONT.
Options:
1. nextstartup(1) - Indicates that the ONT takes effect after next startup
2. immediate(2) - Indicates that the ONT takes effect immediately
3. graceful(3) - Indicates that the ONT takes effect gracefully
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.41.1.6 |
hwGponDeviceOntConfigInfoTableThis table is used to create, modify, delete or query an ONT.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponDeviceOntConfigInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.43 |
hwGponDeviceOntConfigInfoEntryThis table is used to create, modify, delete or query an ONT.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponDeviceOntConfigInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.43.1 |
hwGponDeviceOntIndexThis object indicates the ONT ID, range: 0-127. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.1 |
hwGponDeviceOntAuthMethodThis object indicates the authentication mode for the ONT.
Options:
1. sn(1) - Serial Number
2. snpassword(2) - SN and password
3. alwayson(3) - Password + always-on
4. onceon(4) - Password + once-on
5. loidalwayson (5) - LOID + always-on
6. loidonceon (6) - LOID + once-on
7. loidcheckcodealwayson (7) - LOID + CHECKCODE + always-on
8. loidcheckcodeonceon (8) - LOID + CHECKCODE + once-on
9. snorpassword(9) - SN or password
10.invalid(-1) - Indicates that the query fails or no information is detected
If the hwGponDeviceOntAuthMethod leaf is not specified for creation of a table instance, the default authentication mode sn(1) is used.rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.2 |
hwGponDeviceOntSnThis object indicates the configured ONT serial number.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.3 |
hwGponDeviceOntPasswordThis object indicates the ONT password.
GPON password size (0..10)
XG-PON password size (0..36)rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.4 |
hwGponDeviceOntTimeOutThis object indicates the registered working period of the ONT, ranging from 1 to 168 hours.
The value (-1) indicates that there is no-aging time.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.5 |
hwGponDeviceOntManagementModeThis object indicates the ONT management mode, including OMCI and SNMP.
Options:
1. omci(1) - OMCI
2. snmp(2) - SNMP
3. extendFrame(3) - extendFrame
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.6 |
hwGponDeviceOntLineProfNameThis object indicates the name of the profile that is bound to the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.7 |
hwGponDeviceOntServiceProfNameThis object indicates the name of the service profile that is bound to the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.8 |
hwGponDeviceOntDesptThis object indicates the description of the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.9 |
hwGponDeviceOntEntryStatusThis object is used to create a new row or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual row
3. active(1) -when this leaf is queried, the value is fixed to active(1)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.10 |
hwGponDeviceOntProtectSideThis object indicates whether the ONT is the ONT on the protection side.
Options:
1. protectside(1) - Indicates that the ONT is the ONT on the protection side
2. work(2) - Indicates that the ONT is the ONT on the work siderw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.11 |
hwGponDeviceOntPGMemberRoleThis object indicates the role of the ont in the protect group.
Options:
1. work(1) - Indicates that the role of the ONT is work
2. protect(2) - Indicates that the role of the ONT is protection
3. unjoined(-1) - Indicates that the ONT is not added to the protect groupro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.12 |
hwGponDeviceOntLoidThe object indicates the LOID of the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.13 |
hwGponDeviceOntCheckcodeThe object indicates the checkcode of the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.14 |
hwGponDeviceOntReregisterAuthModeIndicate the type of the ont re-register type for once-on authentication mode, if the ont authentication mode is not once-on,
the value is invalid. if the ont authentication mode is once-on, the default is snPassword.
Options:
1. sn(1) -Indicate the re-register type of the ont is sn authentication type
2. snPassword(2) -Indicate the re-register type of the ont is snPassword authentication type
3. invalid(-1) -Indicate the re-register type of the ont is invalidrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.15 |
hwGponDeviceOntInfoAuthEffectModeIndicates the effect taking mode after the ONT authentication mode is changed. The default effect taking mode is immediate.
Options:
1. immediate (1) -Indicates that the change will take effect immediately.
2. nextstartup (2) -Indicates that the change will take effect when the ONT goes online next time.
3. invalid (-1) -Indicates that the effect taking mode is invalid.rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.16 |
hwGponDeviceOntNniTypeThis object indicates the NNI type of the ONT.
Options:
1. rate2dot5G1dot25G (1) -Downstream rate 2.5Gbps, upstream rate 1.25Gbps.
2. rate10G2dot5G (2) -Downstream rate 10Gbps, upstream rate 2.5Gbps.
3. rate10G10G (3) -Downstream rate 10Gbps, upstream rate 10Gbps.
4. auto(4) -Indicates the actual ont nni type is automatically selected.
5. invalid (-1) -Indicates the invalid value.rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.17 |
hwGponDeviceOntManualSwitchChannelIfindexIndicates the destination channel's ifindex that the ont switch to.
Only the ont under a dynamic channel group support to switch channel.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.43.1.18 |
hwGponDeviceOntExtendConfigTableThis is the ONT extend function configuration table.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponDeviceOntExtendConfigEntry .1.3.6.1.4.1.2011.6.128.1.1.2.44 |
hwGponDeviceOntExtendConfigEntryThis is the ONT extend function configuration table.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponDeviceOntExtendConfigEntry .1.3.6.1.4.1.2011.6.128.1.1.2.44.1 |
hwGponDeviceOntCfgAlarmProfileNameThe name of the ONT alarm profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.44.1.1 |
hwGponDeviceOntCfgSnmpProfileNameThe name of the ONT SNMP profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.44.1.2 |
hwGponDeviceOntExtCfgOpticAlarmProfileNameThis object indicates the name of the optical alarm profile that is bound to the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.44.1.3 |
hwGponDeviceOntVersionInfoTableThis is the ONT version information table.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponDeviceOntVersionInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.45 |
hwGponDeviceOntVersionInfoEntryThis is the ONT version information table.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponDeviceOntVersionInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.45.1 |
hwGponDeviceOntVersionThe ONT version number.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.1 |
hwGponDeviceOntVendorIdThis object indicates the ONT VendorID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.2 |
hwGponDeviceOntProductIdThis object indicates the ONT productID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.3 |
hwGponDeviceOntEquipmentIdThis object indicates the ONT equipmentID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.4 |
hwGponDeviceOntMainSoftVerThe active softerware version of the ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.5 |
hwGponDeviceOntStandbySoftVerThe standby software version of the ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.6 |
hwGponDeviceOntSoftwareWorkModeThe object indicates the software working mode of the GPON ONT.
Options:
1. normal(1) - Normal
2. survivalmode(2) - Survival modero Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.7 |
hwGponDeviceOntCustomizedInfoThis object indicates the ONT customize information.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.8 |
hwGponDeviceOntEquipmentSnThis object indicates the ONT Equipment Sn.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.9 |
hwGponDeviceOntMacThis object indicates the ONT MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.45.1.10 |
hwGponDeviceOntControlInfoTableThis is the control table of the ONT.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponDeviceOntControlInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.46 |
hwGponDeviceOntControlInfoEntryThis is the control table of the ONT.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponDeviceOntControlInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.46.1 |
hwGponDeviceOntControlActiveThis object is used to activate or deactivate an ONT.
Options:
1. activate(1) - Activates an ONT
2. deactivate(2) - Deactivate an ONT
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.1 |
hwGponDeviceOntControlResetThis object is used to reset an ONT.
Options:
1. reset(1) - Reset an ONT
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.2 |
hwGponDeviceOntControlReRegisterThis object is used to re-register an ONT.
Options:
1. reRegister(1) - Re-register an ONT
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.3 |
hwGponDeviceOntControlReDiscoveryThis object is used to reset the discovery status of an ONT.
If the authentication mode is once-on(4), after performing the rediscovery operation,
the registered working period is re-timed.
Options:
1. rediscovery(1) - Reset the discovery status of an ONT
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.4 |
hwGponDeviceOntControlRunStatusThis object indicates the ONT running status.
Options:
1. up(1) - Normal
2. down(2) - Fault
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15 |
hwGponDeviceOntControlConfigStatusThis is the ONT configuration resume status. If it is failed(3),
the ONT is down and the service is interrupted. If the config status is noresume (4),
set the resume policy as resume for the system and re-register the ONT.
Options:
1. initialization(1) - Indicates that the ONT configuration resume status is initialization
2. normal(2) - Indicates that the ONT configuration resume status is normal
3. failed(3) - Indicates that the ONT configuration resume status is failed
4. noresume(4) - Indicates that the ONT configuration resume status is not resumed
5. config(5) - Indicates that the ONT configuration resume status is configuration
6. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.16 |
hwGponDeviceOntControlDiscoveryStatusThis object indicates the ONT discovery state.
Options:
1. on(1) - Indicates that the ONT discovery state is on
2. off(2) - Indicates that the ONT discovery state is off
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.17 |
hwGponDeviceOntControlMatchStatusThis object indicates the ONT match status.
Options:
1. initialization(1) - Indicates that the ONT is initialization
2. match(2) - Indicates that the ONT is matched
3. mismatch(3) - Indicates that the ONT is mismatched
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.18 |
hwGponDeviceOntControlDbaStatusThis object indicates the DBA report status.
Options:
1. nsr(1) - NSR
2. sr(2) - SR
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.19 |
hwGponDeviceOntControlRangingThis object indicates the result of the ONT ranging.
Unit: m
Options:
1. invalid (-1) - Indicates that the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.20 |
hwGponDeviceOntControlMacCountThis object indicates the number of MAC addresses that are learned by the ONT.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.21 |
hwGponDeviceOntControlLastUpTimeThis object indicates the time when the ONT last went online.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.22 |
hwGponDeviceOntControlLastDownTimeThis object indicates the time when the ONT last went offline.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.23 |
hwGponDeviceOntControlLastDownCauseThis object indicates the reason why the ONT last went offline.
The value (1) indicates that the reason is LOS(Loss of signal),
The value (2) indicates that the reason is LOSi(Loss of signal for ONUi) or LOBi (Loss of burst for ONUi),
The value (3) indicates that the reason is LOFI(Loss of frame of ONUi),
The value (4) indicates that the reason is SFI(Signal fail of ONUi),
The value (5) indicates that the reason is LOAI(Loss of acknowledge with ONUi),
The value (6) indicates that the reason is LOAMI(Loss of PLOAM for ONUi),
The value (7) indicates that the reason is deactive ONT fails,
The value (8) indicates that the reason is deactive ONT success,
The value (9) indicates that the reason is reset ONT,
The value (10) indicates that the reason is re-register ONT,
The value (11) indicates that the reason is pop up fail,
The value (13) indicates that the reason is dying-gasp,
The value (15) indicates that the reason is LOKI(Loss of key synch with ONUi),
The value (18) indicates that the reason is deactived ONT due to the ring,
The value (30) indicates that the reason is shut down ONT optical module,
The value (31) indicates that the reason is reset ONT by ONT command,
The value (32) indicates that the reason is reset ONT by ONT reset button,
The value (33) indicates that the reason is reset ONT by ONT software,
The value (34) indicates that the reason is deactived ONT due to broadcast attack,
The value (35) indicates that the reason is operator check fail,
The value (37) indicates that the reason is a rogue ONT detected by itself,
The value (-1) indicates that the query fails.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.24 |
hwGponDeviceOntControlLastDyingGaspTimeThis object indicates the time when the ONT last went down due to Dying Gasp.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.25 |
hwGponDeviceOntControlIsolationStateThis object indicates the ONT isolation status.
Options:
1. normal(0) - Indicates that the ONT is normal
2. isolated(1) - Indicates that the ONT is isolatedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.26 |
hwGponDeviceOntControlBatteryCurStatusThis object indicates the ONT battery status.
Options:
1. notSupport(0) - Not support
2. charge(1) - Charge state
3. discharge(2) - Discharge state
4. holding(3) - Holding state
5. supportButInvalid(4) - Provisioned and present but cannot recharge
6. unknownStatus(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.27 |
hwGponDeviceOntControlTcontNumCombinedThe number of the combined T-CONTs.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.28 |
hwGponDeviceOntControlLastRangingThis object indicates the result of the ONT last ranging.
Unit: m
Options:
1. invalid (-1) - Indicates that the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.29 |
hwGponDeviceOntControlActualSnThe ONT's actual serial number.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.30 |
hwGponDeviceOntCfgCapabilityTableThe ONT configuration capability table.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponDeviceOntCfgCapabilityEntry .1.3.6.1.4.1.2011.6.128.1.1.2.47 |
hwGponDeviceOntCfgCapabilityEntryThe ONT configuration capability table.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponDeviceOntCfgCapabilityEntry .1.3.6.1.4.1.2011.6.128.1.1.2.47.1 |
hwGponDeviceOntCfgCapManagementModeThis object indicates the ONT's management mode, including omci and snmp.
Options:
1. omci(1) - OMCI
2. snmp(2) - SNMP
3. extendFrame(3) - Extend Frame
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.1 |
hwGponDeviceOntCfgCapEthNumThis object indicates the number of ethernet ports.
A special value of 0xFE (254) indicates the number of port is adaptive.
The value is -1 when the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.2 |
hwGponDeviceOntCfgCapPotsNumThis object indicates the number of POTS ports.
A special value of 0xFE (254) indicates the number of port is adaptive
The value is -1 when the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.3 |
hwGponDeviceOntCfgCapIPSupportThis object indicates the IP address configuration mode.
Options:
1. dhcp(1) - DHCP
2. static(2) - Indicates that the IP address configuration mode is static
3. unconfiguration(3) - Indicates that the IP address is not configuration
4. pppoe(4) - Indicates that the IP address configuration mode is pppoe
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.4 |
hwGponDeviceOntCfgCapTdmPortTypeThis object indicates the TDM port type.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.5 |
hwGponDeviceOntCfgCapTdmServiceTypeThis object indicates the TDM service type.
Options:
1. tdmovergem(1) - Tdm over gem
2. cesop(2) - Cesop
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.6 |
hwGponDeviceOntCfgCapTdmNumThis object indicates the number of TDM ports.
The value is -1 when the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.7 |
hwGponDeviceOntCfgCapMocaNumThis object indicates the number of MOCA ports.
The value is -1 when the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.8 |
hwGponDeviceOntCfgCapCatvUniNumThis object indicates the number of CATV UNI ports.
A special value of 0xFE (254) indicates the number of port is adaptive
The value is -1 when the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.9 |
hwGponDeviceOntCfgCapGemNumThis object indicates the number of GEM ports.
The value is -1 when the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.10 |
hwGponDeviceOntCfgCapGemMappingModeThis object indicates the mapping mode.
Options:
1. vlan(1) - The mapping mode is vlan
2. pri8021p(2) - The mapping mode is 802.1p
3. vlanpri(3) - The mapping mode is vlan and 802.1p
4. port(4) - The mapping mode is port
5. vlanport(5) - The mapping mode is vlan and port
6. portpri(6) - The mapping mode is port and 802.1p
7. vlanpriport(7) - The mapping mode is vlan, port and 802.1p
8. e1t1port(8) - The mapping mode is the port of e1 and t1
9. iptos(9) - The mapping mode is iptos
10. vlaniptos(10) - The mapping mode is vlan and iptos
11. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.11 |
hwGponDeviceOntCfgCapTcontNumThis object indicates the number of T-CONTs.
The value is -1 when the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.12 |
hwGponDeviceOntCfgCapFCTypeThis object indicates the type of flow control.
Options:
1. pq(1) - The type of flow control is PQ
2. gemportcar(2) - The type of flow control is the gemportcar
3. flowcar(3) - The type of flow control is the flowcar
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.13 |
hwGponDeviceOntCfgCapVdslPortNumThis object indicates the number of VDSL ports.
A special value of 0xFE (254) indicates the number of port is adaptive.
The value is -1 when the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.47.1.14 |
hwGponDeviceAutoFindOntInfoTableThis table is used to query the information about the auto-found ONTs in the system.
The index of this table is a combination of ifIndex and hwGponDeviceAutoFindOntInfoOntIndex. SEQUENCE OF HwGponDeviceAutoFindOntInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.48 |
hwGponDeviceAutoFindOntInfoEntryThis table is used to query the information about the auto-found ONTs in the system.
The index of this entry is a combination of ifIndex and hwGponDeviceAutoFindOntInfoOntIndex. HwGponDeviceAutoFindOntInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.48.1 |
hwGponDeviceAutoFindOntInfoOntIndexThe index of the auto-found ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.1 |
hwGponDeviceAutoFindOntInfoSnThis object indicates the ONT serial number.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.2 |
hwGponDeviceAutoFindOntInfoPasswordThis object indicates the ONT password.
GPON password size (0..10)
XG-PON password size (0..36)ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.3 |
hwGponDeviceAutoFindOntInfoOntVendorIdThis object indicates the ONT vendorid.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.4 |
hwGponDeviceAutoFindOntInfoOntVerThis object indicates the ONT Version.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.5 |
hwGponDeviceAutoFindOntInfoOntMainSoftVerThis object indicates the ONT MainSoftVer.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.6 |
hwGponDeviceAutoFindOntInfoOntEquipmentIdThis object indicates the ONT EquipmentId.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.7 |
hwGponDeviceAutoFindOntInfoOntAutoFindTimeThis object indicates the time for ONT's auto find.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.8 |
hwGponDeviceAutoFindOntInfoLoidThis object indicates the ONT LOID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.9 |
hwGponDeviceAutoFindOntInfoCheckcodeThis object indicates the ONT CHECKCODEro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.10 |
hwGponDeviceAutoFindOntInfoCustomizedInfoThis object indicates the ONT customize information.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.11 |
hwGponDeviceAutoFindOntInfoOntNniTypeThis object indicates the ONT actual rate type.
Options:
1. rate2dot5G1dot25G(1) - Downstream rate 2.5Gbps, upstream rate 1.25Gbps
2. rate10G2dot5G(2) - Downstream rate 10Gbps, upstream rate 2.5Gbps
3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.12 |
hwGponDeviceAutoFindOntInfoEquipmentSnThis object indicates the ONT Equipment Sn.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.13 |
hwGponDeviceAutoFindOntInfoMacThis object indicates the ONT MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.48.1.14 |
hwGponDeviceOntIpConfigInfoTableThis is the ONT IP configuration table. This table is used to configure and query
the IP configuration mode and IP address of an ONT.
The index of this table is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntIpIndex. SEQUENCE OF HwGponDeviceOntIpConfigInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.49 |
hwGponDeviceOntIpConfigInfoEntryThis is the ONT IP configuration table. This table is used to configure and query
the IP configuration mode and IP address of an ONT.
The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex and hwGponDeviceOntIpIndex. HwGponDeviceOntIpConfigInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.49.1 |
hwGponDeviceOntIpConfigModeThis object indicates the IP configuration mode.
Options:
1. dhcp(1) - DHCP
2. static(2) - Indicates that the IP configuration mode is static
3. unconfiguration(3) - Indicates that the IP is not configuration
4. configurationFile(4) - Indicates that the IP is configuration file
5. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.1 |
hwGponDeviceOntIpAddressThis object indicates the IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.2 |
hwGponDeviceOntNetMaskThis object indicates the Subnet mask.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.3 |
hwGponDeviceOntPhyAddressThis object indicates the ONT MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.4 |
hwGponDeviceOntNetGatewayThis object indicates the default network gateway.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.5 |
hwGponDeviceOntMasterDNSThis object indicates the active DNS address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.6 |
hwGponDeviceOntSlaveDNSThis object indicates the slave DNS address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.7 |
hwGponDeviceOntIpConfigVlanThis object indicates the management VLAN of ONT.
range: 0-4095rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.8 |
hwGponDeviceOntIpConfigPriorityThe management priority of ONT. range: 0-7, 0xfe: dscpMapping, -1: invalid value.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.9 |
hwGponDeviceOntIpIndexThis object indicates the IP index of the ont IP host Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.10 |
hwGponDeviceOntIpconfigDscpDefaultPriorityThis object indicates the default priority for dscpMapping policy.
range: 0-7rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.11 |
hwGponDeviceOntIpconfigDscpProfIndexThis object indicates the dscp profile index of the ONT ip host.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.12 |
hwGponDeviceOntIpconfigDhcpResetThis object is used for resetting the ip host in the DHCP mode.
Options:
1. reset(1) - DHCP reset in the DHCP mode
2. invalid(-1) - invalidrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.49.1.13 |
hwGponDeviceOntAlarmStateInfoTableThe table is used to query the state of the ONT alarms.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponDeviceOntAlarmStateInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.50 |
hwGponDeviceOntAlarmStateInfoEntryThe table is used to query the state of the ONT alarms.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponDeviceOntAlarmStateInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.50.1 |
hwGponDeviceOntAlarmSDiThis object indicates the signal degrade (SDi) alarm.
1: no alarm is generated; 2: alarm is generated.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.50.1.1 |
hwGponDeviceOntAlarmSFiThis object indicates the signal fail (SFi) alarm.
1: no alarm is generated; 2: alarm is generated.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.50.1.2 |
hwGponDeviceOntAlarmDOWiThis object indicates the the ONU DOWi alarm.
1: no alarm is generated; 2: alarm is generated.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.50.1.3 |
hwGponDeviceOntAlarmLOSiThis object indicates the loss of frame (LOSi) alarm.
1: no alarm is generated; 2: alarm is generated.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.50.1.4 |
hwGponDeviceOntObjAlarmStateRDIiThis object indicates the remote defect indication (RDIi) alarm
1: no alarm is generated; 2: alarm is generated.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.50.1.5 |
hwGponDeviceOntOpticalDdmInfoTableThe table is used to query the information of the ONT Optical module.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponDeviceOntOpticalDdmInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.51 |
hwGponDeviceOntOpticalDdmInfoEntryThe table is used to query the information of the ONT Optical module.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponDeviceOntOpticalDdmInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.51.1 |
hwGponOntOpticalDdmTemperatureThe temperature of the optical module, unit C(centigrade).ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.1 |
hwGponOntOpticalDdmBiasCurrentThe Bias Current of the optical module, unit mA.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.2 |
hwGponOntOpticalDdmTxPowerThe transmitting power of the optical module, unit 0.01dBm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.3 |
hwGponOntOpticalDdmRxPowerThe receiving power of the optical module, unit 0.01dBm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.4 |
hwGponOntOpticalDdmVoltageThe power feed voltage of the optical module, unit mV.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.5 |
hwGponOntOpticalDdmOltRxOntPowerThe ONT optical power received on the OLT, unit dBm.
The relationship between the actual value and the value get from this leaf node is as follows,
Actual value = ((Node value - 10000) / 100)ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.6 |
hwGponOntOpticalDdmAniCATVRxPowerIndicates the CATV receiving optical power of the optical module, unit 0.01dBm.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.51.1.7 |
hwGponDeviceOntRegisterInfoTableThis table is used to query the register information about the ONT,
including the ONT SN, register time and register result.
The index of this table is a combination of ifIndex and hwGponDeviceOntRegisterSerialNum. SEQUENCE OF HwGponDeviceOntRegisterInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.52 |
hwGponDeviceOntRegisterInfoEntryThis table is used to query the register information about the ONT,
including the ONT SN, register time and register result.
The index of this entry is a combination of ifIndex and hwGponDeviceOntRegisterSerialNum. HwGponDeviceOntRegisterInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.52.1 |
hwGponDeviceOntRegisterSerialNumThis object indicates the register number. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.1 |
hwGponDeviceOntRegisterSnThis object indicates the ONT serial number.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.2 |
hwGponDeviceOntRegisterResultThis object indicates the register result.
Options:
1. success(1) - Indicates that the register result is success
2. fail(2) - Indicates that the register result is fail
3. snConflict(3) - Indicates that the SN conflict
4. passwordConflict(4) - Indicates that the password conflict
5. loidConflict(5) - Indicates that the LOID conflict
6. passwordError(6) - Indicates that the password conflict
7. ccError(7) - Indicates that the CC error
8. rangingOnuFail(8) - Indicates that the ranging ONU fail
9. unconfirmed(9) - Indicates that the ONU is unconfirmed
10. misMatch(10) - Indicates that the ONU is mismatch
11. loidError(11) - Indicates that the LOID error
12. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.3 |
hwGponDeviceOntRegisterTimeThis object indicates the register time.
-1 is the invalid value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.4 |
hwGponDeviceOntRegisterConflictedIfindexThis object indicates the ifIndex of the conflicted ONT.
-1 is the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.5 |
hwGponDeviceOntRegisterConflictedOntIndexThis object indicates the index of the conflicted ONT.
-1 is the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.6 |
hwGponDeviceOntRegisterOntPasswordThis object indicates the ONT password
GPON password size (0..10)
XG-PON password size (0..36)ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.7 |
hwGponDeviceOntRegisterOntVendorIdThis object indicates the ONT vendor ID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.8 |
hwGponDeviceOntRegisterOntVersionThis object indicates the ONT version.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.9 |
hwGponDeviceOntRegisterOntMainSoftVersionThis object indicates the ONT mainsoft version.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.10 |
hwGponDeviceOntRegisterOntEquipmentIdThis object indicates the ONT equipment ID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.11 |
hwGponDeviceOntRegisterOntLoidThis object indicates the ONT LOID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.12 |
hwGponDeviceOntRegisterOntCheckcodeThis object indicates the ONT CHECKCODEro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.13 |
hwGponDeviceOntRegisterOntNniTypeThis object indicates the ONT actual rate type.
Options:
1. rate2dot5G1dot25G(1) - Downstream rate 2.5Gbps, upstream rate 1.25Gbps
2. rate10G2dot5G(2) - Downstream rate 10Gbps, upstream rate 2.5Gbps
3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.52.1.14 |
hwEponDeviceOntConfigInfoTableThis table is used to create, modify, delete or query an ONT.
The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. SEQUENCE OF HwEponDeviceOntConfigInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.53 |
hwEponDeviceOntConfigInfoEntryThis table is used to create, modify, delete or query an ONT.
The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. HwEponDeviceOntConfigInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.53.1 |
hwEponDeviceOntIndexThis object indicates the ONT ID, range: 0~254. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.1 |
hwEponDeviceOntAuthModeThis object indicates the authentication mode for the ONT.
Options:
1. onceon(1) - The authentication mode is once on
2. alwayson(2) - The authentication mode is always on
3. mac(3) - The authentication mode is MAC
4. lOIDonceon(5) - The authentication mode is LOID and once on
5. lOIDalwayson(6) - The authentication mode is LOID and always on
6. lOIDCheckCodeOnceon(7) - The authentication mode is LOID, checkcode and once on
7. lOIDCheckCodeAlwayson(8) - The authentication mode is LOID, checkcode and once always on
8. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.2 |
hwEponDeviceOntMacAddressThis object indicates the ONT MAC.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.3 |
hwEponDeviceOntPasswordThis object indicates the ONT password.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.4 |
hwEponDeviceOntTimeoutThis object indicates the registered working period of the ONT, ranging from 1 to 168 hours.
The value (-1) indicates that there is no-aging time.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.5 |
hwEponDeviceOntManagementModeThis object indicates the ONT management mode, including OAM and SNMP.
Options:
1. oam(1) - OAM
2. snmp(2) - SNMP
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.6 |
hwEponDeviceOntLineProfNameThis object indicates the name of the line profile that is bound to the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.7 |
hwEponDeviceOntServiceProfNameThis object indicates the name of the service profile that is bound to the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.8 |
hwEponDeviceOntDesptThis object indicates the description of the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.9 |
hwEponDeviceOntEntryStatusThis object is used to create a new row or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.10 |
hwEponDeviceOntProtectSideThis object indicates whether the ONT is the ONT on the protection side.
Options:
1. protectside(1) - Indicates that the ONT is the ONT on the protection side
2. work(2) - Indicates that the ONT is the ONT on the work siderw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.11 |
hwEponDeviceOntObjectLoidThis object indicates the ONT LOID.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.12 |
hwEponDeviceOntObjectCheckcodeThis object indicates the ONT CHECKCODE.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.13 |
hwEponDeviceLineProfileServiceSlaProfileIndexThis object indicates the index of SLA profilerw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.14 |
hwEponDeviceOntPGMemberRoleIndicate the role of the ont in the protect group,
Options:
1. work(1) - Indicates that the role of the ONT is work
2. protect(2) - Indicates that the role of the ONT is protection
3. unjoined(-1) - Indicates that the ONT is not added to the protect groupro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.15 |
hwEponDeviceOntAuthEffectModeIndicates the effect taking mode after the ONT authentication mode is changed. The default effect taking mode is immediate.
Options:
1. immediate (1) -Indicates that the change will take effect immediately.
2. nextstartup (2) -Indicates that the change will take effect when the ONT goes online next time.
3. invalid (-1) -Indicates that the effect taking mode is invalid.rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.16 |
hwEponDeviceOntNniTypeThis object indicates the ONT rate type.
Options:
1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps
2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps
3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps
4. auto(4) - Indicates that the ONT NNI type is automatically selected
5. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps
6. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.53.1.17 |
hwEponDeviceOntExtendConfigTableThis is the ONT extend function configuration table.
The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. SEQUENCE OF HwEponDeviceOntExtendConfigEntry .1.3.6.1.4.1.2011.6.128.1.1.2.54 |
hwEponDeviceOntExtendConfigEntryThis is the ONT extend function configuration table.
The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. HwEponDeviceOntExtendConfigEntry .1.3.6.1.4.1.2011.6.128.1.1.2.54.1 |
hwEponDeviceOntCfgSnmpProfileNameThis object indicates the name of the ONT SNMP profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.54.1.1 |
hwEponDeviceOntCfgMulticastModeThis object indicates the XPON service profile multicast mode.
Options:
1. ctc(1) - Indicates that the XPON service profile multicast mode is CTC
2. igmpsnooping(2) - Indicates that the XPON service profile multicast mode is igmp snooping
3. transparent(3) - Indicates that the XPON service profile multicast mode is transparent
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.54.1.2 |
hwEponDeviceOntExtCfgOpticAlarmProfileNameThis object indicates the name of the optical alarm profile that is bound to the ONT.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.54.1.3 |
hwEponDeviceOntExtCfgAlarmProfileNameThis object indicates the name of the alarm profile that is bound to the ONT PON port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.54.1.4 |
hwEponDeviceOntExtCfgWarningProfileNameThis object indicates the name of the warning profile that is bound to the ONT PON port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.54.1.5 |
hwEponDeviceOntVersionInfoTableThis is the ONT version information table.
The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. SEQUENCE OF HwEponDeviceOntVersionInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.55 |
hwEponDeviceOntVersionInfoEntryThis is the ONT version information table.
The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. HwEponDeviceOntVersionInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.55.1 |
hwEponDeviceOntVendorIdThis object indicates the ONT VendorID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.1 |
hwEponDeviceOntModelThis object indicates the ONT model.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.2 |
hwEponDeviceOntOntIdentifierThis object indicates the ONT identifier.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.3 |
hwEponDeviceOntHardwareVersionThis object indicates the hardware version of the ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.4 |
hwEponDeviceOntSoftwareVersionThis object indicates the software version of the ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.5 |
hwEponDeviceOntChipVendorIDThis object indicates the verder ID of the ONT's chip.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.6 |
hwEponDeviceOntChipModelThis object indicates the model of the ONT's chip.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.7 |
hwEponDeviceOntChipVersionThis object indicates the verion of the ONT's chip.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.8 |
hwEponDeviceOntChipDesignDateThis object indicates the design data of the ONT's chip.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.9 |
hwEponDeviceOntFirmwareVersionThis object indicates the firmware version of the ONT's chip.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.10 |
hwEponDeviceOntChipRevisionThis object indicates the firmware reversion of the ONT's chip.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.11 |
hwEponDeviceOntSoftwareWorkModeThe object indicates the software working mode of the EPON ONT.
Options:
1. normal(1) - Normal
2. survivalmode(2) - Survival modero Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.12 |
hwEponDeviceOntExtendedModelThis object indicates the ONT extended model.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.13 |
hwEponDeviceOntOuiVersionThis object indicates the highest version of ONT OUI.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.14 |
hwEponDeviceOntExtendedFirmwareVersionThis object indicates the extended firmware version of the ONT's chip.ro Opaque .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.15 |
hwEponDeviceOntCustomizedInfoThis object indicates the ONT customize information.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.55.1.16 |
hwEponDeviceOntCfgCapabilityTableThe EPON ONT configuration capability table.
The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. SEQUENCE OF HwEponDeviceOntCfgCapabilityEntry .1.3.6.1.4.1.2011.6.128.1.1.2.56 |
hwEponDeviceOntCfgCapabilityEntryThe EPON ONT configuration capability table.
The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. HwEponDeviceOntCfgCapabilityEntry .1.3.6.1.4.1.2011.6.128.1.1.2.56.1 |
hwEponDeviceOntCfgCapManageModeThis object indicates the ONT's management mode, including oam and snmp.
Options:
1. oam(1) - OAM
2. snmp(2) - SNMP
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.56.1.1 |
hwEponDeviceOntCfgCapPotsNumThis object indicates the number of POTS ports.
A special value of 0xFE (254) indicates the number
of port is adaptive.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.56.1.2 |
hwEponDeviceOntCfgCapIPSupportThis object indicates the IP config mode.
Options:
1. dhcp(1) - DHCP
2. static(2) - Indicates that the IP config mode is static
3. unconfiguration(3) - Indicates that the IP is not configuration
4. pppoe(4) - Indicates that the IP config mode is PPPoE
5. invalid (-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.56.1.3 |
hwEponDeviceOntCfgCapTdmPortTypeThis object indicates the TDM port type.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.56.1.4 |
hwEponDeviceOntCfgCapTdmNumThis object indicates the number of TDM ports.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.56.1.5 |
hwEponDeviceOntCfgCapEthNumThis object indicates the number ethernet ports.
A special value of 0xFE (254) indicates the number
of port is adaptive.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.56.1.6 |
hwEponDeviceOntControlInfoTableThis is the control table of the ONT.
The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. SEQUENCE OF HwEponDeviceOntControlInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.57 |
hwEponDeviceOntControlInfoEntryThis is the control table of the ONT.
The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. HwEponDeviceOntControlInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.57.1 |
hwEponDeviceOntActiveThis object is used to activate or deactivate an ONT.
Options:
1. activate(1) - Activates an ONT
2. deactivate(2) - Deactivates an ONT
3. invalid (-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.1 |
hwEponDeviceOntResetThis object is used to reset an ONT.
Options:
1. reset(1) - Reset an ONT
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.2 |
hwEponDeviceOntReRegisterThis object is used to re-register an ONT.
Options:
1. reRegister(1) - Re-register an ONT
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.3 |
hwEponDeviceOntReDiscoveryThis object is used to reset the discovery status of an ONT.
If the authentication mode is once-on(4), after performing the rediscovery operation,
the registered working period is re-timed.
Options:
1. rediscovery(1) - Reset the discovery status of an ONT
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.4 |
hwEponDeviceOntPingThis object indicates the ONT ping.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.5 |
hwEponDeviceOntRunStatusThis object indicates the ONT running status.
Options:
1. up(1) - Normal
2. down(2) - Fault
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.15 |
hwEponDeviceOntConfigStatusThis is the ONT configuration resume status. If it is failed(3),
the ONT is down and the service is interrupted.
If the config status is noresume (4), set the resume policy as
resume for the system and re-register the ONT.
Options:
1. initialization(1) - Indicates that the ONT configuration resume status is initialization
2. normal(2) - Indicates that the ONT configuration resume status is normal
3. failed(3) - Indicates that the ONT configuration resume status is failed
4. noresume(4) - Indicates that the ONT configuration resume status is not resumed
5. config(5) - Indicates that the ONT configuration resume status is configuration
6. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.16 |
hwEponDeviceOntDiscoveryStateThis object indicates the ONT discovery state.
Options:
1. on(1) - Indicates that the ONT discovery state is on
2. off(2) - Indicates that the ONT discovery state is off
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.17 |
hwEponDeviceOntMatchStatusThis object indicates the ONT match status.
Options:
1. initialization(1) - Indicates that the ONT is initialization
2. match(2) - Indicates that the ONT is matched
3. mismatch(3) - Indicates that the ONT is mismatched
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.18 |
hwEponDeviceOntDistanceThis object indicates the result of the ONT ranging.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.19 |
hwEponDeviceOntRttThis object indicates the result of the ONT ranging(RTT).ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.20 |
hwEponDeviceOntUpStreamBWThis object indicates the upstream bandwidth of the ONT.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.21 |
hwEponDeviceOntDownStreamBWThis object indicates the downstream bandwidth of the ONT.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.22 |
hwEponDeviceOntLastUpTimeThis object indicates the time when the ONT last goes online.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.23 |
hwEponDeviceOntLastDownTimeThis object indicates the time when the ONT last goes offline.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.24 |
hwEponDeviceOntLastDownCauseThis object indicates the reason why the ONT last went offline.
The value (1) indicates that the reason is LOS(Loss of signal),
The value (2) indicates that the reason is LOSI(Loss of signal for ONUi),
The value (3) indicates that the reason is LOFI(Loss of frame of ONUi),
The value (4) indicates that the reason is SFI(Signal fail of ONUi),
The value (5) indicates that the reason is LOAI(Loss of acknowledge with ONUi),
The value (6) indicates that the reason is LOAMI(Loss of PLOAM for ONUi),
The value (7) indicates that the reason is deactive ONT fails,
The value (8) indicates that the reason is deactive ONT success,
The value (9) indicates that the reason is reset ONT,
The value (10) indicates that the reason is re-register ONT,
The value (11) indicates that the reason is pop up fail,
The value (12) indicates that the reason is authentication fail,
The value (13) indicates that the reason is dying-gasp,
The value (14) reserved,
The value (15) indicates that the reason is LOKI(Loss of key synch with ONUi),
The value (18) indicates that the reason is deactived ONT due to the ring,
The value (30) indicates that the reason is shut down ONT optical module,
The value (31) indicates that the reason is reset ONT by ONT command,
The value (32) indicates that the reason is reset ONT by ONT reset button,
The value (33) indicates that the reason is reset ONT by ONT software,
The value (34) indicates that the reason is deactived ONT due to broadcast attack,
The value (37) indicates that the reason is a rogue ONT detected by itself,
The value (-1) indicates that the query fails.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.25 |
hwEponDeviceOntLastDyingGaspTimeThis object indicates the time when the ONT last goes down due to Dying Gasp.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.26 |
hwEponDeviceOntIsolationStatusThis object indicates the ONT isolation status.
Options:
1. normal(0) - Indicates that the ONT is normal
2. isolated(1) - Indicates that the ONT is isolatedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.27 |
hwEponDeviceOntActualNniTypeThis object indicates the ONT actual rate type.
Options:
1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps
2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps
3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps
4. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.28 |
hwEponDeviceOntLastActualNniTypeThis object indicates the ONT last actual rate type.
Options:
1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps
2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps
3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps
4. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.29 |
hwEponDeviceOntLastDistanceThis object indicates the result of the ONT last ranging.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.30 |
hwEponDeviceAutoFindOntInfoTableThe table is used to query ONT(s) that are found automatically.
The index of this table is a combination of ifIndex and hwEponDeviceAutoFindOntInfoOntIndex. SEQUENCE OF HwEponDeviceAutoFindOntInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.58 |
hwEponDeviceAutoFindOntInfoEntryThe table is used to query ONT(s) that are found automatically.
The index of this entry is a combination of ifIndex and hwEponDeviceAutoFindOntInfoOntIndex. HwEponDeviceAutoFindOntInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.58.1 |
hwEponDeviceAutoFindOntInfoOntIndexThis object indicates the auto find ONT index, range: 0~254. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.1 |
hwEponDeviceAutoFindOntInfoMacAddressThis object indicates the MAC address of ONT.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.2 |
hwEponDeviceAutoFindOntInfoPasswordValueThis object indicates the password of ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.3 |
hwEponDeviceAutoFindOntInfoVendorIdThis object indicates the Vendor identifier of ONT.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.4 |
hwEponDeviceAutoFindOntInfoSoftwareVersionThis object indicates the Software version of ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.5 |
hwEponDeviceAutoFindOntInfoHardwareVersionThis object indicates the hardware version of ONT.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.6 |
hwEponDeviceAutoFindOntInfoAutoFindTimeThis object indicates the time for ONT's auto find.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.7 |
hwEponDeviceAutoFindOntInfoOntModelThis object indicates the Mode of ONT.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.8 |
hwEponDeviceAutoFindOntInfoLoidThis object indicates the ONT LOID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.9 |
hwEponDeviceAutoFindOntInfoCheckcodeThis object indicates the ONT CHECKCODE.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.10 |
hwEponDeviceAutoFindOntNniTypeThis object indicates the ONT actual rate type.
Options:
1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps
2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps
3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps
4. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.11 |
hwEponDeviceAutoFindOntInfoOntExtendedModelThis object indicates the ONT extended model.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.12 |
hwEponDeviceAutoFindOntInfoOuiVersionThis object indicates the highest ONT OUI versionro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.13 |
hwEponDeviceAutoFindOntInfoCustomizedInfoThis object indicates the ONT customize information.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.58.1.14 |
hwEponDeviceOntCapabilityInfoTableThis table is used to query the ONT capability set.
The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. SEQUENCE OF HwEponDeviceOntCapabilityInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.59 |
hwEponDeviceOntCapabilityInfoEntryThis table is used to query the ONT capability set.
The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. HwEponDeviceOntCapabilityInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.59.1 |
hwEponDeviceOntPOTSPortNumThis object indicates the number of POTS ports.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.1 |
hwEponDeviceOntFEPortsNumThis object indicates the number of FE ports.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.2 |
hwEponDeviceOntGEPortsNumThis object indicates the number of GE ports.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.3 |
hwEponDeviceOntTDMPortsNumThis object indicates the number of TDM ports.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.4 |
hwEponDeviceOntFECSupportThis object indicates whether the ONT supports the FEC.
The value (1) indicates that the ONT supports the FEC.
The value (2) indicates that the ONT not supports the FEC.
The value (-1) indicates that the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.5 |
hwEponDeviceOntSupportbackupbatteryThis object indicates whether the ONT supports the standby battery.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.6 |
hwEponDeviceOntUpQueueAllocationIncreThis object indicates the increment of the allocated bandwidth of the upstream queue.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.7 |
hwEponDeviceOntUpQueueNumThis object indicates the number of upstream queues.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.8 |
hwEponDeviceOntUpQueueNumPerPortThis object indicates the maximum number of queues of the upsstream port.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.9 |
hwEponDeviceOntDownQueueNumThis object indicates the number of downstream queues.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.10 |
hwEponDeviceOntDownQueueNumPerPortThis object indicates the maximum number of queues of the downstream port.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.11 |
hwEponDeviceOntFePortListThis object indicates the bitmap of the FE port.ro PortList .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.12 |
hwEponDeviceOntGePortListThis object indicates the bitmap of the GE port.ro PortList .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.13 |
hwEponDeviceOntSupportMulticastQuickLeaveThis object indicates the multicast quick leave capability.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.14 |
hwEponDeviceOntDeviceTypeThis object indicates the ONT device type.
Options:
1. sfu(0) - SFU
2. hgu(1) - HGU
3. sbu(2) - SBU
4. boxShapedMDU(3) - Box shaped MDU
5. smallCapacityCardTypeMDU(4) - Small capacity card type MDU
6. boxShapedCardTypeMDU(5) - Box shaped card type MDU
7. rackCardTypeMDU(6) - Rack card type MDU
8. cardTypeMDU(7) - Card type MDU
9. mtu(8) - MTU
10. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.15 |
hwEponDeviceOntMultiLLIDThis object indicates the ONT device multiLLID.
-1 indicates an invalid value.
A value from 1 to 255 indicates the number of supported LLIDs.
In CTC Technical Specification for EPON Equipment V2.1_200904,
0 indicates that multiple LLIDs are supported.
In CTC Technical Specification for EPON Equipment V2.1_200912,
0 indicates an invalid value.ro Integer32 (-1 | 0..255) .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.16 |
hwEponDeviceOntProtectionTypeThis object indicates the ONT protection type.
Options:
1. unsupport(0) - Do not support the ONT protection
2. typecProtection(1) - Type C protection
3. typedProtection(2) - Type D protection
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.17 |
hwEponDeviceOntPonIFNumThis object indicates the ONT device ponIF number.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.18 |
hwEponDeviceOntSlotNumThis object indicates the ONT device slot number.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.19 |
hwEponDeviceOntADSL2plusNumThis object indicates the ONT device ADSL2 + port numberro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.20 |
hwEponDeviceOntVDSL2NumThis object indicates the ONT device VDSL2 port number.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.21 |
hwEponDeviceOntWLANNumThis object indicates the ONT device WLAN port number.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.22 |
hwEponDeviceOntUSBNumThis object indicates the ONT device USB port number.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.23 |
hwEponDeviceOntCATVNumThis object indicates the ONT device CATV port number.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.24 |
hwEponDeviceOntSupportIPv6AwareThis object indicates whether the ONT supports IPv6 aware.
Options:
1.unsupport(1) - Indicates that the ONT does not support IPv6 aware.
2.support(2) - Indicates that the ONT supports IPv6 aware.
3.invalid(-1) - Indicates that the query fails or no information is detected.ro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.25 |
hwEponDeviceOntSupportPowerSupplyControlThis object indicates whether the ONT supports power supply control.
Options:
1. unsupport(1) - Indicates that the ONT does not support power supply control.
2. supportTx(2) - Indicates that the ONT only supports Tx power supply control.
3. supportTxAndRx(3) - Indicates that the ONT supports both Tx power and Rx power supply control.
4. invalid(-1) - Indicates that the query fails or no information is detected.ro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.26 |
hwEponDeviceOntSupportServiceSLAThis object indicates whether the ONT supports service SLA.
The value (1) indicates that the ONT does not support service SLA.
The value (2-8) indicates the number of the ONT supports service SLA.
The value (-1) indicates that the query fails or no information is detected.ro Integer32( -1 | 1..8 ) .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.27 |
hwEponDeviceOnt10GEPortsNumThis object indicates the number of 10GE ports.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.59.1.28 |
hwEponDeviceOntIpConfigInfoTableThis is the ONT IP configuration table. This table is used to configure and query
the IP configuration mode and IP address of an ONT.
The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. SEQUENCE OF HwEponDeviceOntIpConfigInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.60 |
hwEponDeviceOntIpConfigInfoEntryThis is the ONT IP configuration table. This table is used to configure and query
the IP configuration mode and IP address of an ONT.
The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. HwEponDeviceOntIpConfigInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.60.1 |
hwEponDeviceOntIpConfigVlanThis object indicates the management VLAN.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.60.1.1 |
hwEponDeviceOntIpAddressThis object indicates the IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.60.1.2 |
hwEponDeviceOntNetMaskThis object indicates the subnet mask of the IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.60.1.3 |
hwEponDeviceOntNetGatewayThis object indicates the default network gateway.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.60.1.4 |
hwEponDeviceOntIpConfigRowStatusThe hwEponDeviceOntIpConfigRowStatus is used to create a new row or to modify
or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.60.1.5 |
hwEponDeviceOntIpConfigPriorityThis object indicates the management priority of MDU.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.60.1.6 |
hwEponDeviceOntRegInfoTableThis table is used to query the register information about the ONT,
including the ONT MAC, register time and register result.
The index of this table is a combination of ifIndex and hwEponDeviceSerialNum. SEQUENCE OF HwEponDeviceOntRegInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.61 |
hwEponDeviceOntRegInfoEntryThis table is used to query the register information about the ONT,
including the ONT MAC, register time and register result.
The index of this entry is a combination of ifIndex and hwEponDeviceSerialNum. HwEponDeviceOntRegInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.61.1 |
hwEponDeviceSerialNumThis object indicates the register number. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.1 |
hwEponDeviceRegOntMacThis object indicates the ONT MAC.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.2 |
hwEponDeviceRegOntResultThis object indicates the register result.
Options:
1. success(1) - Indicates that the register result is success
2. fail(2) - Indicates that the register result is fail
3. macConflict(3) - Indicates that the MAC conflict
4. passwordConflict(4) - Indicates that the password conflict
5. loidConflict(5) - Indicates that the LOID conflict
6. passwordError(6) - Indicates that the password conflict
7. ccError(7) - Indicates that the CC error
8. rangingOnuFail(8) - Indicates that the ranging ONU fail
9. unconfirmed(9) - Indicates that the ONU is unconfirmed
10. misMatch(10) - Indicates that the ONU is mismatch
11. loidError(11) - Indicates that the LOID error
12. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.3 |
hwEponDeviceRegOntTimeThis object indicates the register time.
-1 is the invalid value.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.4 |
hwEponDeviceRegConflictedIfindexThis object indicates the ifIndex of the conflicted ONT.
-1 is the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.5 |
hwEponDeviceRegConflictedOntIndexThis object indicates the index of the conflicted ONT.
-1 is the invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.6 |
hwEponDeviceRegOntPasswordValueThis object indicates the ONT password.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.
A null is reported in other scenarios.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.7 |
hwEponDeviceRegOntVendorIdThis object indicates the ONT vendor ID.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.8 |
hwEponDeviceRegOntSoftwareVersionThis object indicates the Software version of ONT.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.
A null is reported in other scenarios.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.9 |
hwEponDeviceRegOntHardwareVersionThis object indicates the hardware version of ONT.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.
A null is reported in other scenarios.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.10 |
hwEponDeviceRegOntModelThis object indicates the Mode of ONT.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.11 |
hwEponDeviceRegOntLoidThis object indicates the ONT LOID.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.
A null is reported in other scenarios.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.12 |
hwEponDeviceRegOntCheckcodeThis object indicates the ONT CHECKCODE.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.
A null is reported in other scenarios.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.13 |
hwEponDeviceRegOntRateTypeThis object indicates the ONT actual rate type.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.
Options:
1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps
2. rate10G1G(2) - Downstream rate 10Gbps, upstream rate 1Gbps
3. rate10G10G(3) - Downstream rate 10Gbps, upstream rate 10Gbps
4. rate10G2G(5) - Downstream rate 10Gbps, upstream rate 2Gbps
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.14 |
hwEponDeviceRegOntExtendedModelThis object indicates the ONT extended model.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.
A null is reported in other scenarios.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.15 |
hwEponDeviceRegOntOuiVersionThis object indicates the highest ONT OUI version.
A valid value is reported only when hwEponDeviceRegOntResult is unconfirmed.
A null is reported in other scenarios.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.61.1.16 |
hwGponDeviceOntEthernetPortCfgTableThis is the ONT ETH port table, This table is used to set or query the attribute
of the ONT ETH port, including duplex, transmission rate and native VLAN and others.
The index of this table is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntEthernetPortId.
When the attribute of an ONT ETH port is queried on the NMS,
if the port is bound with hwGponDeviceOntEthernetOnlineState,
the running states of the port is queried.
If the port is not bound with hwGponDeviceOntEthernetOnlineState,
the configuration of the port is queried. SEQUENCE OF HwGponDeviceOntEthernetPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.62 |
hwGponDeviceOntEthernetPortCfgEntryThis is the ONT ETH port table, This table is used to set or query the attribute
of the ONT ETH port, including duplex, transmission rate and native VLAN and others.
The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntEthernetPortId.
When the attribute of an ONT ETH port is queried on the NMS,
if the port is bound with hwGponDeviceOntEthernetOnlineState,
the running states of the port is queried.
If the port is not bound with hwGponDeviceOntEthernetOnlineState,
the configuration of the port is queried. HwGponDeviceOntEthernetPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.62.1 |
hwGponDeviceOntEthernetPortIdThis object indicates the ONT ETH port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.1 |
hwGponDeviceOntEthernetNegotiateThis object indicates the negotiation switch.
The value (1) indicates that the negotiation switch is on.
The value (2) indicates that the negotiation switch is off.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.2 |
hwGponDeviceOntEthernetDuplexModeThis object indicates the duplex type of the port.
Options:
1. half(1) - Forced half duplex
2. full(2) - Forced full duplex
3. autoneg(3) - Auto negotiation
4. autohalf(4) - Auto half duplex
5. autofull(5) - Auto full duplex
6. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.3 |
hwGponDeviceOntEthernetSpeedThis object indicates the transmission rate of the port.
Options:
1. speed10M(1) - The forced transmission rate of the port is 10M
2. speed100M(2) - The forced transmission rate of the port is 100M
3. speed1000M(3) - The forced transmission rate of the port is 1000M
4. autoneg(4) - The transmission rate of the port is auto negotiation
5. autospeed10M(5) - The auto transmission rate of the port is 10M
6. autospeed100M(6) - The auto transmission rate of the port is 100M
7. autospeed1000M(7) - The auto transmission rate of the port is 1000M
8. speed10G(8) - The forced transmission rate of the port is 10G
9. autospeed10G(9) - The auto transmission rate of the port is 10G
10. speed2500M(10) - The forced transmission rate of the port is 2500M
11. autospeed2500M(11) - The auto transmission rate of the port is 2500M
12. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.4 |
hwGponDeviceOntEthernetOperateStatusThis object indicates the switch of the port.
Options:
1. on(1) - Indicates that the switch of the port is on
2. off(2) - Indicates that the switch of the port is off
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.5 |
hwGponDeviceOntEthernetFlowCtrlSwitchThis object is used to set the flow control switch of ONT port.
Options:
1. on(1) - Indicates that the flow control switch of ONT port is on
2. off(2) - Indicates that the flow control switch of ONT port is off
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.6 |
hwGponDeviceOntEthernetVlanDefaultThis object indicates the native VLAN of the port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.7 |
hwGponDeviceOntEthernetVlanDefaultPriorityThis object indicates the native VLAN priority of the port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.8 |
hwGponDeviceOntEthernetActualPortTypeThis object indicates the actual ETH port type of the ONT.
The value (13) indicates that the port type is t1,
The value (14) indicates that the port type is e1,
The value (24) indicates that the port type is fe,
The value (34) indicates that the port type is ge,
The value (46) indicates that the port type is moca,
The value (47) indicates that the port type is eth,
The value (50) indicates that the port type is iphost,
The value (-1) indicates that the query fails.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.21 |
hwGponDeviceOntEthernetOnlineStateThis object indicates the status of ONT ETH port.
Options:
1. linkup(1) - Indicates that the status of ONT ETH port is link up
2. linkdown(2) - Indicates that the status of ONT ETH port is link down
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.22 |
hwGponDeviceOntEthernetUpStreamCarTrafficTableIdThis object indicates the ONT ethernet port upstream car profile id (1~1024, 0xfffe-unconcern).rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.23 |
hwGponDeviceOntEthernetDownStreamCarTrafficTableIdThis object indicates the ONT ethernet port downstream car profile id (1~1024, 0xfffe-unconcern).rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.24 |
hwGponDeviceOntEthernetPortIgmpForwardModeThe object is used to enable or disable the switch of ONT port IGMP forward mode.
Options:
1. disable(1) - Disable the switch of ONT port IGMP forward mode
2. enable(2) - Enable the switch of ONT port IGMP forward mode
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.25 |
hwGponDeviceOntEthernetPortRingStatusThe object is used to enable or disable the switch of ONT port IGMP forward mode.
Options:
1. loop(1) - Indicates that the ring status of ONT ETH port is loop
2. noloop(2) - Indicates that the ring status of ONT ETH port is no loop
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.26 |
hwGponDeviceOntEthernetUpStreamCarTrafficTableNameThis object indicates the ONT ethernet port upstream car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.27 |
hwGponDeviceOntEthernetDownStreamCarTrafficTableNameThis object indicates the ONT ethernet port downstream car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.28 |
hwGponDeviceOntEthernetRouteSwitchThis object indicates the actual route switch status of ONT ETH port.
Options:
1. enable(1) - Indicates that the route switch status of ONT ETH port is enable
2. disable(2) - Indicates that the route switch status of ONT ETH port is disable
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.29 |
hwGponDeviceOntEthernetModeIndicates the optical module status of the ONT ethernet port.
Options:
1. electric(1) - Indicates that the mode status of ONT ETH port is electric
2. optic(2) - Indicates that the mode status of ONT ETH port is optic
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.30 |
hwGponDeviceOntEthernetOpticalModuleStatusThe status of the ONT ethernet port.
Options:
1. normal(1) - Indicates that the optical module status of ONT ETH port is normal
2. absence(2) - Indicates that the optical module status of ONT ETH port is absence
3. mismatch(3) - Indicates that the optical module status of ONT ETH port is mismatch
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.31 |
hwGponDeviceOntEthernetOnlineDurationIndicates the online duration of the ONT ethernet port.
Unit: secondro Gauge32 UNITS "second" .1.3.6.1.4.1.2011.6.128.1.1.2.62.1.32 |
hwGponDeviceOntCatvPortCfgTableThis is the ONT CATV port table.
The index of this table is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntCatvPortId. SEQUENCE OF HwGponDeviceOntCatvPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.63 |
hwGponDeviceOntCatvPortCfgEntryThis is the ONT CATV port table.
The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntCatvPortId. HwGponDeviceOntCatvPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.63.1 |
hwGponDeviceOntCatvPortIdThis object indicates the ONT CATV port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.63.1.1 |
hwGponDeviceOntCatvOperateStatusThis object indicates the laser switch of ONT CATV port.
Options:
1. on(1) - Indicates that the laser switch of ONT CATV port is on
2. off(2) - Indicates that the laser switch of ONT CATV port is off
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.63.1.2 |
hwGponDeviceOntCatvOnlineStatusThis object indicates the link status of ONT CATV port.
The value (1) indicates that the CATV port is online.
The value (2) indicates that the CATV port is offline.
The value (-1) indicates that the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.63.1.3 |
hwGponDeviceOntCatvFrequencyThis object indicates the frequency of ONT CATV port.
Options:
1. allPass(1) - Indicates that the frequency of ONT CATV port is all-pass
2. highPass(2) - Indicates that the frequency of ONT CATV port is high-pass
3. lowPass(3) - Indicates that the frequency of ONT CATV port is low-pass
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.63.1.4 |
hwGponDeviceOntCatvTxPowerThis object indicates the Tx power of ONT CATV port.
Unit: 0.001dBmV
Options:
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detectedro Integer32 UNITS "0.001dBmV" .1.3.6.1.4.1.2011.6.128.1.1.2.63.1.5 |
hwGponDeviceOntMocaPortCfgTableThis is the ONT MOCA port config table.
The index of this table is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntMocaPortId. SEQUENCE OF HwGponDeviceOntMocaPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.64 |
hwGponDeviceOntMocaPortCfgEntryThis is the ONT MOCA port config table.
The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntMocaPortId. HwGponDeviceOntMocaPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.64.1 |
hwGponDeviceOntMocaPortIdThis object indicates the ONT MOCA port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.64.1.1 |
hwGponDeviceOntMocaPortVlanDefaultThis object indicates the native VLAN of the Moca port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.64.1.2 |
hwGponDeviceOntMocaPortVlanDefaultPriThis object indicates the native VLAN priority of the MOCA port.
The range is from 0 to 7, and the value (-1) is invalid.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.64.1.3 |
hwGponDeviceOntIpHostPortCfgTableThis is the ONT IPHOST port config table.
The index of this table is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntIpHostPortId. SEQUENCE OF HwGponDeviceOntIpHostPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.65 |
hwGponDeviceOntIpHostPortCfgEntryThis is the ONT IPHOST port config table.
The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntIpHostPortId. HwGponDeviceOntIpHostPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.65.1 |
hwGponDeviceOntIpHostPortIdThis object indicates the ONT IPHOST port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.65.1.1 |
hwGponDeviceOntIpHostPortVlanDefaultThis object indicates the native VLAN of the IPHOST port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.65.1.2 |
hwGponDeviceOntIpHostPortVlanDefaultPriThis object indicates the native VLAN priority of the IPHOST port.
The range is from 0 to 7, and the value (-1) is invalid.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.65.1.3 |
hwEponDeviceOntEthernetPortCfgTableThis is the ONT ETH port config table.
The index of this table is a combination of ifIndex, hwEponDeviceOntIndex
and hwEponDeviceOntEthernetPortId. SEQUENCE OF HwEponDeviceOntEthernetPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.81 |
hwEponDeviceOntEthernetPortCfgEntryThis is the ONT ETH port config table.
The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex
and hwEponDeviceOntEthernetPortId. HwEponDeviceOntEthernetPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.81.1 |
hwEponDeviceOntEthernetPortIdThis object indicates the ONT ETH port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.1 |
hwEponDeviceOntEthernetNegotiateThis object indicates the negotiation switch.
Options:
1. auto(1) - Indicates that the negotiation switch is auto negotiation
2. neg(2) - Indicates that the negotiation switch is negotiation
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.2 |
hwEponDeviceOntEthernetDuplexModeThis object indicates the duplex type of the port.
Options:
1. half(1) - Forced half duplex
2. full(2) - Forced full duplex
3. autoneg(3) - Auto negotiation
4. autohalf(4) - Auto half duplex
5. autofull(5) - Auto full duplex
6. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.3 |
hwEponDeviceOntEthernetSpeedThis object indicates the transmission rate of the port.
Options:
1. speed10M(10) - The forced transmission rate of the port is 10M
2. speed100M(100) - The forced transmission rate of the port is 100M
3. speed1000M(1000) - The forced transmission rate of the port is 1000M
4. autoneg(4) - The transmission rate of the port is auto negotiation
5. autospeed10M(5) - The auto transmission rate of the port is 10M
6. autospeed100M(6) - The auto transmission rate of the port is 100M
7. autospeed1000M(7) - The auto transmission rate of the port is 1000M
8. speed10G(8) - The forced transmission rate of the port is 10G
9. autospeed10G(9) - The auto transmission rate of the port is 10G
10. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.4 |
hwEponDeviceOntEthernetVlanDefaultThis object indicates the native VLAN of the port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.5 |
hwEponDeviceOntEthernetOperateStatusThis object indicates the switch of the port.
Options:
1. on(1) - Indicates that the switch of the port is on
2. off(2) - Indicates that the switch of the port is off
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.7 |
hwEponDeviceOntEthernetFlowcontrolSwitchThis object is used to set ONT port flow control switch.
Options:
1. on(1) - Indicates that the switch of ONT port flow control is on
2. off(2) - Indicates that the switch of ONT port flow control is off
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.8 |
hwEponDeviceOntEthernetRingStatusThis object indicates the ring status of ONT ETH port.
Options:
1. forward(1) - Indicates that the ring status of ONT ETH port is forward
2. block(2) - Indicates that the ring status of ONT ETH port is block
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.10 |
hwEponDeviceOntEthernetOnlineStateThis object indicates the status of ONT ETH port.
Options:
1. linkup(1) - Indicates that the status of ONT ETH port is link up
2. linkdown(2) - Indicates that the status of ONT ETH port is link down
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.31 |
hwEponDeviceOntEthernetPortCfgUpStreamCarTrafficTableIdThis object indicates the ONT port upstream car profile id (1~1024, 0xfffe-unconcern).rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.32 |
hwEponDeviceOntEthernetPortCfgDownStreamCarTrafficTableIdThis object indicates the ONT port downstream car profile id (1~1024, 0xfffe-unconcern).rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.33 |
hwEponDeviceOntEthernetPortCfgUpStreamCarTrafficTableNameThis object indicates the ONT port upstream car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.34 |
hwEponDeviceOntEthernetPortCfgDownStreamCarTrafficTableNameThis object indicates the ONT port downstream car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.81.1.35 |
hwEponDeviceOntTDMPortCfgTableThe ONT TDM port config table.
The index of this table is a combination of ifIndex, hwEponDeviceOntIndex
and hwEponDeviceOntTDMPortId. SEQUENCE OF HwEponDeviceOntTDMPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.82 |
hwEponDeviceOntTDMPortCfgEntryThe ONT TDM port config table.
The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex
and hwEponDeviceOntTDMPortId. HwEponDeviceOntTDMPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.82.1 |
hwEponDeviceOntTDMPortIdThis object indicates the ONT TDM port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.82.1.1 |
hwEponDeviceOntTDMPortOperateStatusThis object indicates the switch of the port.
Options:
1. on(1) - Indicates that the switch of the port is on
2. off(2) - Indicates that the switch of the port is off
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.82.1.2 |
hwEponDeviceOntPOTSPortCfgTableThe ONT POTS port config table.
The index of this table is a combination of ifIndex, hwEponDeviceOntIndex
and hwEponDeviceOntPOTSPortId. SEQUENCE OF HwEponDeviceOntPOTSPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.83 |
hwEponDeviceOntPOTSPortCfgEntryThe ONT POTS port config table.
The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex
and hwEponDeviceOntPOTSPortId. HwEponDeviceOntPOTSPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.83.1 |
hwEponDeviceOntPOTSPortIdThis object indicates the ONT POTS port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.83.1.1 |
hwEponDeviceOntPOTSPortOperateStatusThis object indicates the ONT POTS port switch.
Options:
1. on(1) - Indicates that the switch of the ONT POTS port is on
2. off(2) - Indicates that the switch of the ONT POTS port is off
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.83.1.2 |
hwGponDeviceOntTDMPortCfgTableThe ONT TDM port config table.
The index of this table is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntTDMPortId. SEQUENCE OF HwGponDeviceOntTDMPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.84 |
hwGponDeviceOntTDMPortCfgEntryThe ONT TDM port config table.
The index of this entry is a combination of ifIndex, hwGponDeviceOntIndex
and hwGponDeviceOntTDMPortId. HwGponDeviceOntTDMPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.2.84.1 |
hwGponDeviceOntTDMPortIdThis object indicates the ONT TDM port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.84.1.1 |
hwGponDeviceOntTDMPortStateThis object indicates the ONT TDM port state.
Options:
1. normal (1) - Indicates that the ONT TDM port state is normal
2. los (2) - Indicates that the ONT TDM port state is LOS
3. ais(3) - Indicates that the ONT TDM port state is AIS
4. lof(4) - Indicates that the ONT TDM port state is LOF
5. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.84.1.2 |
hwGponDeviceOntTDMPortOperateStatusONT TDM port enable switch.
Options:
1. enable(1) - Enable the ONT TDM port switch
2. disable(2) - Disable the ONT TDM port switch
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.84.1.3 |
hwEponDeviceCtcRemoteOntPortVlanConfigTableThe ont port's remote native vlan info table.
The index of this table is a combination of ifIndex, hwEponDeviceOntIndex,
hwEponDeviceOntPortType and hwEponDeviceOntPortId. SEQUENCE OF HwEponDeviceCtcRemoteOntPortVlanConfigEntry .1.3.6.1.4.1.2011.6.128.1.1.2.91 |
hwEponDeviceCtcRemoteOntPortVlanConfigEntryThe ont port's remote native vlan info table.
The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex,
hwEponDeviceOntPortType and hwEponDeviceOntPortId. HwEponDeviceCtcRemoteOntPortVlanConfigEntry .1.3.6.1.4.1.2011.6.128.1.1.2.91.1 |
hwEponDeviceOntPortTypeThis object indicates the ont port's type.
The value 24 indicates the FE port.
The value 34 indicates the GE port.
The value 47 indicates the ETH port. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.91.1.1 |
hwEponDeviceOntPortIdThis object indicates the ont port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.91.1.2 |
hwEponDeviceCtcRemoteOntPortVlanModeThis object indicates the vlan mode of ont's port.
Options:
1. transparent(0) - Indicates that the vlan mode of ont's port is transparent
2. tag(1) - Indicates that the vlan mode of ont's port is tag
3. translation(2) - Indicates that the vlan mode of ont's port is translation
4. aggregation(3) - Indicates that the vlan mode of ont's port is aggregation
5. trunk(4) - Indicates that the vlan mode of ont's port is trunk
6. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.91.1.3 |
hwEponDeviceCtcRemoteOntPortDefaultTagTPIDThis object indicates the ont port's native vlan TPID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.91.1.4 |
hwEponDeviceCtcRemoteOntPortDefaultTagCFIThis object indicates the ont port's native vlan CFI.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.91.1.5 |
hwEponDeviceCtcRemoteOntPortDefaultTagPriThis object indicates the ont port's native vlan priority.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.91.1.6 |
hwEponDeviceCtcRemoteOntPortDefaultTagVIDThis object indicates the ont port's native VLAN ID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.91.1.7 |
hwEponDeviceCtcRemoteOntPortVlanTranslationInfoTableThis table is used to display the configuration information about VLAN switching pair of the ONT port.
The index of this table is a combination of ifIndex, hwEponDeviceOntIndex,
hwEponDeviceOntPortType, hwEponDeviceOntPortId and hwEponDeviceOntPortVlanIndex. SEQUENCE OF HwEponDeviceCtcRemoteOntPortVlanTranslationInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.92 |
hwEponDeviceCtcRemoteOntPortVlanTranslationInfoEntryThis table is used to display the configuration information about VLAN switching pair of the ONT port.
The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex,
hwEponDeviceOntPortType, hwEponDeviceOntPortId and hwEponDeviceOntPortVlanIndex. HwEponDeviceCtcRemoteOntPortVlanTranslationInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.92.1 |
hwEponDeviceOntPortVlanIndexThis object indicates the vlan index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.1 |
hwEponDeviceCtcOntPortCvlanTagTPIDThis object indicates the ont port's vlan TPID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.2 |
hwEponDeviceCtcOntPortCvlanTagCFIThis object indicates the ont port's vlan CFI.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.3 |
hwEponDeviceCtcOntPortCvlanTagPriThis object indicates the ont port's vlan priority.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.4 |
hwEponDeviceCtcOntPortCvlanTagVIDThis object indicates the ont port's VLAN ID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.5 |
hwEponDeviceCtcOntPortSvlanTagTPIDThis object indicates the ont port's vlan TPID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.6 |
hwEponDeviceCtcOntPortSvlanTagCFIThis object indicates the ont port's vlan CFI.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.7 |
hwEponDeviceCtcOntPortSvlanTagPriThis object indicates the ont port's vlan priority.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.8 |
hwEponDeviceCtcOntPortSvlanTagVIDThis object indicates the ont port's VLAN ID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.92.1.9 |
hwEponDeviceCtcRemoteOntMultiCtrItemTableThis table is used to display the ONT multicast control list.
The index of this table is a combination of ifIndex, hwEponDeviceOntIndex
and hwEponDeviceOntMultiCtrItemIndex. SEQUENCE OF HwEponDeviceCtcRemoteOntMultiCtrItemEntry .1.3.6.1.4.1.2011.6.128.1.1.2.93 |
hwEponDeviceCtcRemoteOntMultiCtrItemEntryThis table is used to display the ONT multicast control list.
The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex
and hwEponDeviceOntMultiCtrItemIndex. HwEponDeviceCtcRemoteOntMultiCtrItemEntry .1.3.6.1.4.1.2011.6.128.1.1.2.93.1 |
hwEponDeviceOntMultiCtrItemIndexThis object indicates the item's index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.93.1.1 |
hwEponDeviceCtcOntMultiCtrlTypeThis object indicates the multicast contrl type.
Options:
1. gda(0) - Based GDA MAC only
2. gdaVLAN(1) - Based GDA MAC plus muliticast VLAN ID
3. gdaSA(2) - Based GDA MAC plus SA MAC
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.93.1.2 |
hwEponDeviceCtcOntMultiCtrlUsrIDThis object indicates the user ID of multicast.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.93.1.3 |
hwEponDeviceCtcOntMultiCtrlGDAThis object indicates the GDA of multicast control.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.93.1.4 |
hwEponDeviceCtcOntMultiCtrlVlanIDorSAThis object indicates the SA of multicast control.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.93.1.5 |
hwGponDeviceOntSnmpStaticRouteConfigTableThis is the ONT SNMP static route configuration table.
This table is used to configure and query the SNMP route configuration of an ONT.
The index of this table is a combination of ifIndex,
hwXponDeviceOntIndex and hwGponOntObjectSnmpStaticRouteIndex. SEQUENCE OF HwGponDeviceOntSnmpStaticRouteConfigEntry .1.3.6.1.4.1.2011.6.128.1.1.2.100 |
hwGponDeviceOntSnmpStaticRouteConfigEntryThis is the ONT SNMP static route configuration table.
This table is used to configure and query the SNMP route configuration of an ONT.
The index of this entry is a combination of ifIndex,
hwXponDeviceOntIndex and hwGponOntObjectSnmpStaticRouteIndex. HwGponDeviceOntSnmpStaticRouteConfigEntry .1.3.6.1.4.1.2011.6.128.1.1.2.100.1 |
hwGponOntObjectSnmpStaticRouteIndexThis object indicates the ONT SNMP static route table index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.100.1.1 |
hwGponOntObjectSnmpStaticRouteIpAddressThis object indicates the IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.100.1.2 |
hwGponOntObjectSnmpStaticRouteNetMaskThis object indicates the subnet mask of the IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.100.1.3 |
hwGponOntObjectSnmpStaticRouteNextHopThis object indicates the next hop IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.100.1.4 |
hwGponOntObjectSnmpStaticRouteRowStatusThe hwGponOntObjectSnmpStaticRouteRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.100.1.5 |
hwGponOntObjectSnmpStaticRouteOutputPortThis object indicates the output portid.rw Integer32(-1 | 0..254) .1.3.6.1.4.1.2011.6.128.1.1.2.100.1.6 |
hwGponDeviceOntRegisterExInfoTableThis table is used to save the ont's register info, less than 10 times.
The index of this table is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceOntRegisterInfoIndex. SEQUENCE OF HwGponDeviceOntRegisterExInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.101 |
hwGponDeviceOntRegisterExInfoEntryThis table is used to save the ont's register info, less than 10 times.
The index of this entry is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceOntRegisterInfoIndex. HwGponDeviceOntRegisterExInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.101.1 |
hwGponDeviceOntRegisterInfoIndexThis object indicates the ONT register information index.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.1 |
hwGponDeviceOntRegisterInfoAuthMethodThis object indicates the authentication mode for the ONT.
The value (1) indicates that the mode is SN or MAC.
The value (2) indicates that the mode is the combination of SN and PASSWORD or combination of MAC and PASSWORD.
The value (3) indicates that the mode is PASSWORD and the type is always on.
The value (4) indicates that the mode is PASSWORD and the type is once on.
The value (5) indicates that the mode is LOID and the type is always on.
The value (6) indicates that the mode is LOID and the type is once on.
The value (7) indicates that the mode is the combination of LOID and CHECKCODE ,and the type is always on.
The value (8) indicates that the mode is the combination of LOID and CHECKCODE ,and the type is once on.
The value (-1) indicates that the query fails or no information is detected.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.2 |
hwGponDeviceOntRegisterInfoSNThis object indicates the ONT serial number.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.3 |
hwGponDeviceOntRegisterInfoPasswordThis object indicates the ONT password
GPON password size (0..10)
XG-PON password size (0..36)ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.4 |
hwGponDeviceOntRegisterInfoTypeThis object indicates the ONT typero OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.5 |
hwGponDeviceOntRegisterInfoUpTimeThis object indicates the time when the ONT went online.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.6 |
hwGponDeviceOntRegisterInfoDownTimeThis object indicates the time when the ONT went offline.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.7 |
hwGponDeviceOntRegisterInfoDownCauseThis object indicates the reason why the ONT went offline.
Options:
1. ontdeleted(0) - The cause of ONT's down is that the ont is deleted
2. linkeddown(1) - The cause of ONT's down is that the ont is disconnected
3. losi(2) - The cause of ONT's down is LOSi(Loss of signal for ONUi) or LOBi (Loss of burst for ONUi)
4. lofi(3) - The cause of ONT's down is that the ont is lofi(OLT can not receive
expected optical frame from ONT)
5. sfi(4) - The cause of ONT's down is that the ont is sfi(Signal fail of ONUi)
6. loai(5) - The cause of ONT's down is that the ont is loai(Loss of acknowledge with ONUi)
7. loami(6) - The cause of ONT's down is that the ont is loami(Loss of PLOAM for ONUi)
8. disablefail(7) - The cause of ONT's down is that the ont fails to be deactivated
9. deactivated(8) - The cause of ONT's down is that the ont is deactivated
10. reset(9) - The cause of ONT's down is that the ont is reseted
11. reregister(10) - The cause of ONT's down is that the ont is registered again
12. popupfail(11) - The cause of ONT's down is that the ont popup test fails
13. authfail(12) - The cause of ONT's down is that the ont authentication fails
14. powerdown(13) - The cause of ONT's down is that the ont is powered off
15. reserved(14) - Reserved
16. loki(15) - The cause of ONT's down is that the ont is loki(Loss of key synch with ONUi)
17. ringDeactivated(18) - The cause of ONT's down is that the ont is deactivated due to the ring
18. turnOffOptic(30) - The cause of ONT's down is that the ont optical module is shut down
19. cmdReboot(31) - The cause of ONT's down is that the ont is reset by ont command
20. ontResetkeyReboot(32) - The cause of ONT's down is that the ont is reset by ont reset button
21. ontSoftwareReset(33) - The cause of ONT's down is that the ont is reset by ont software
22. broadcastAttackDeactivated(34) - The cause of ONT's down is that the ont is deactivated due to broadcast attack
23. operatorCheckFail(35) - The cause of ONT's down is that operator check fail
24. ontOltIncompatible(36) - The cause of ONT's down is that the ont is incompatible with the OLT
25. rogueOntselfDetected(37) - The cause of ONT's down is that the rogue ont detected by itself
26. autoIsolateReset(38) - The cause of ONT's down is that the ont resets to prevent rogue ont attacks
27. autoIsolateDeact(39) - The cause of ONT's down is that the ont is deactivated to prevent rogue ont attacks
28. ontNotInWhiteList(40) - The cause of ONT's down is that the ont is not in the white list
29. noerror(255) - The cause of ONT's down is that the ont is noerror
30. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.8 |
hwGponDeviceOntRegisterInfoLoidThis object indicates the ONT LOID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.9 |
hwGponDeviceOntRegisterInfoCheckcodeThis object indicates the ONT CHECKCODE.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.101.1.10 |
hwEponDeviceOntSnmpStaticRouteTableThis is the ONT SNMP static route configuration table.
This table is used to configure and query the SNMP route configuration of an ONT.
The index of this table is a combination of ifIndex,
hwXponDeviceOntIndex and hwEponOntSnmpStaticRouteIndex. SEQUENCE OF HwEponDeviceOntSnmpStaticRouteEntry .1.3.6.1.4.1.2011.6.128.1.1.2.102 |
hwEponDeviceOntSnmpStaticRouteEntryThis is the ONT SNMP static route configuration table.
This table is used to configure and query the SNMP route configuration of an ONT.
The index of this entry is a combination of ifIndex,
hwXponDeviceOntIndex and hwEponOntSnmpStaticRouteIndex. HwEponDeviceOntSnmpStaticRouteEntry .1.3.6.1.4.1.2011.6.128.1.1.2.102.1 |
hwEponOntSnmpStaticRouteIndexThis object indicates the ONT SNMP static route table index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.102.1.1 |
hwEponOntSnmpStaticRouteIpAddressThis object indicates the IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.102.1.2 |
hwEponOntSnmpStaticRouteNetMaskThis object indicates the subnet mask of the IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.102.1.3 |
hwEponOntSnmpStaticRouteNextHopThis object indicates the next hop IP address.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.2.102.1.4 |
hwEponOntSnmpStaticRouteRowStatusThe hwEponOntSnmpStaticRouteRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.102.1.5 |
hwEponDeviceOntRegisterExInfoTableThis table is used to save the ONT's register info, less than 10 times.
The index of this table is a combination of ifIndex,
hwXponDeviceOntIndex and hwEponDeviceOntRegisterInfoIndex. SEQUENCE OF HwEponDeviceOntRegisterExInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.103 |
hwEponDeviceOntRegisterExInfoEntryThis table is used to save the ONT's register info, less than 10 times.
The index of this entry is a combination of ifIndex,
hwXponDeviceOntIndex and hwEponDeviceOntRegisterInfoIndex. HwEponDeviceOntRegisterExInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.103.1 |
hwEponDeviceOntRegisterInfoIndexThis object indicates the ONT register information index.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.1 |
hwEponDeviceOntRegisterInfoAuthMethodThis object indicates the authentication mode for the ONT.
Options:
1. mac(1) - The authentication mode is MAC
2. macpassword(2) - The authentication mode is MAC and password
3. alwayson(3) - The authentication mode is always on
4. onceon(4) - The authentication mode is once on
5. lOIDonceon(5) - The authentication mode is LOID and once on
6. lOIDalwayson(6) - The authentication mode is LOID and always on
7. lOIDCheckCodeOnceon(7) - The authentication mode is LOID, checkcode and once on
8. lOIDCheckCodeAlwayson(8) - The authentication mode is LOID, checkcode and once always on
9. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.2 |
hwEponDeviceOntRegisterInfoMacThis object indicates the ONT MAC address.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.3 |
hwEponDeviceOntRegisterInfoPasswordThis object indicates the ONT password.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.4 |
hwEponDeviceOntRegisterInfoTypeThis object indicates the ONT type.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.5 |
hwEponDeviceOntRegisterInfoUpTimeThis object indicates the time when the ONT goes online.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.6 |
hwEponDeviceOntRegisterInfoDownTimeThis object indicates the time when the ONT goes offline.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.7 |
hwEponDeviceOntRegisterInfoDownCauseThis object indicates the reason why the ONT goes offline.
Options:
1. ontdeleted(0) - The cause of ONT's down is that the ont is deleted
2. linkeddown(1) - The cause of ONT's down is that the ont is disconnected
3. losi(2) - The cause of ONT's down is that the ont is losi(OLT can not receive
expected optical signals from ONT)
4. lofi(3) - The cause of ONT's down is that the ont is lofi(OLT can not receive
expected optical frame from ONT)
5. sfi(4) - The cause of ONT's down is that the ont is sfi(Signal fail of ONUi)
6. loai(5) - The cause of ONT's down is that the ont is loai(Loss of acknowledge with ONUi)
7. loami(6) - The cause of ONT's down is that the ont is loami(Loss of PLOAM for ONUi)
8. disablefail(7) - The cause of ONT's down is that the ont fails to be deactivated
9. deactivated(8) - The cause of ONT's down is that the ont is deactivated
10. reset(9) - The cause of ONT's down is that the ont is reseted
11. reregister(10) - The cause of ONT's down is that the ont is registered again
12. popupfail(11) - The cause of ONT's down is that the ont popup test fails
13. authfail(12) - The cause of ONT's down is that the ont authentication fails
14. powerdown(13) - The cause of ONT's down is that the ont is powered off
15. reserved(14) - Reserved
16. loki(15) - The cause of ONT's down is that the ont is loki(Loss of key synch with ONUi)
17. ringDeactivated(18) - The cause of ONT's down is that the ont is deactivated due to the ring
18. broadcastAttackDeactivated(34) - The cause of ONT's down is that the ont is deactivated due to broadcast attack
19. noerror(255) - The cause of ONT's down is that the ont is noerror
20. invalid(-1) - Indicates that the query fails or no information is detected
21. rogueOntselfDetected(37) - The cause of ONT's down is that the rogue ont detected by itself
22. antirogueontautoisolatereset(38) - The cause of ONT's down is to prevent rogue ONT attacks by reset ONT
23. antirogueontautoisolatedeactive(39) - The cause of ONT's down is to prevent rogue ONT attacks by deactive ONTro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.8 |
hwEponDeviceOntRegisterInfoLoidThis object indicates the ONT LOID.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.9 |
hwEponDeviceOntRegisterInfoCheckcodeThis object indicates the ONT CHECKCODEro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.103.1.10 |
hwEponDeviceOntOpticsDdmInfoTableThis table is used to query the information about the optical transceiver of the ONT.
The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. SEQUENCE OF HwEponDeviceOntOpticsDdmInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.104 |
hwEponDeviceOntOpticsDdmInfoEntryThis table is used to query the information about the optical transceiver of the ONT.
The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex. HwEponDeviceOntOpticsDdmInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.104.1 |
hwEponOntOpticalDdmOltRxOntPowerThe ONT optical power received on the OLT, unit dBm.
The relationship between the actual value and the value get from this leaf node is as follows,
Actual value = ((Node value - 10000) / 100)ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.104.1.1 |
hwEponOntOpticalDdmTemperatureThis object indicates the temperature of the optical module.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.104.1.2 |
hwEponOntOpticalDdmBiasCurrentThis object indicates the Bias Current of the optical module.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.104.1.3 |
hwEponOntOpticalDdmTxPowerThis object indicates the transmitting power of the optical module.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.104.1.4 |
hwEponOntOpticalDdmRxPowerThis object indicates the receiving power of the optical module.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.104.1.5 |
hwEponOntOpticalDdmVoltageThis object indicates the Power feed voltage of the optical module.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.104.1.6 |
hwEponOntOpticalDdmOltTxPowerThis object indicates the transmitting power of the ont peer optical module.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.104.1.7 |
hwXponDeviceOltDualparentTableThis table is the type B dual-homing configuration table.
The index of this table is ifIndex. SEQUENCE OF HwXponDeviceOltDualparentEntry .1.3.6.1.4.1.2011.6.128.1.1.2.120 |
hwXponDeviceOltDualparentEntryThis table is the type B dual-homing configuration table.
The index of this entry is ifIndex. HwXponDeviceOltDualparentEntry .1.3.6.1.4.1.2011.6.128.1.1.2.120.1 |
hwXponDeviceOltDualparentJoinThis object indicates whether to add a port to the protection group.
Options:
1.joinwork(1) - Add the port as a working port to the protection group
2.joinprotect(2) - Add the port as a protection port to the protection group
3.undojoin(3) - Delete the memer port of the protection group
4.invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.120.1.1 |
hwXponDeviceOltDualparentFreezeThis object indicates whether the protection group is in the frozen state.
Options:
1. freeze(1) - Freeze the protection group
2. undofreeze(2) - Undo the frozen state of the protection group
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.120.1.2 |
hwXponDeviceOltDualparentForceSwitchThis object indicates whether the port is in the forced working mode.
Options:
1. force(1) - The port is in the forced working mode
2. undoforce(2) - The port is not in the forced working mode
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.120.1.3 |
hwXponDeviceOltDualparentWorkStateThis object is used to set or show the port protect status.
Options:
1. active(1) - The port protect status is active
2. standby(2) - The port protect status is standby
3. fault(3) - The port protect status is fault
4. detect(4) - The port protect status is detective
5. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.120.1.4 |
hwXponDeviceOltDualparentDetectTimeLenThis object indicates the duration of the protection group member in the detect state.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.120.1.5 |
hwXponDeviceOltDualparentDescThis object indicates the description of the member port of the protection group.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.120.1.6 |
hwXponDynamicMacQueryTableThis table is used to query dynamic MAC address.
The index of this table is a combination of ifIndex, hwXponDynamicMacVlanId,
hwXponDynamicMacIndex, hwXponDynamicMacQueryType, hwXponDynamicMacQueryPara0,
hwXponDynamicMacQueryPara1, hwXponDynamicMacQueryPara2 and hwXponDynamicMacQueryPara3. SEQUENCE OF HwXponDynamicMacQueryEntry .1.3.6.1.4.1.2011.6.128.1.1.2.130 |
hwXponDynamicMacQueryEntryThis table is used to query dynamic MAC address.
The index of this entry is a combination of ifIndex, hwXponDynamicMacVlanId,
hwXponDynamicMacIndex, hwXponDynamicMacQueryType, hwXponDynamicMacQueryPara0,
hwXponDynamicMacQueryPara1, hwXponDynamicMacQueryPara2 and hwXponDynamicMacQueryPara3. HwXponDynamicMacQueryEntry .1.3.6.1.4.1.2011.6.128.1.1.2.130.1 |
hwXponDynamicMacVlanIdThis object indicates the VLAN of dynamic MAC address.
The value(-1) is invalid value. Integer32(-1 | 1..4094) .1.3.6.1.4.1.2011.6.128.1.1.2.130.1.1 |
hwXponDynamicMacIndexThis object indicates the dynamic MAC address index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.130.1.2 |
hwXponDynamicMacQueryTypeThis object indicates the query type.
Options:
1. xponOntPortInSpecVlan(1) - The ONT port is in the specified vlan
2. xponOntInSpecPort(2) - The specified ONT port
3. xponOntInSpecOnt(3) - The specified ONT
4. xponOntInSpecWlan(4) - The WLAN of specified ONT HwXponDynamicMacQueryType .1.3.6.1.4.1.2011.6.128.1.1.2.130.1.3 |
hwXponDynamicMacQueryPara0This object indicates the ONT ID, range: 0~254. HwXponDynamicMacQueryPara .1.3.6.1.4.1.2011.6.128.1.1.2.130.1.4 |
hwXponDynamicMacQueryPara1This object indicates the type of the ONT port. HwXponDynamicMacQueryPara .1.3.6.1.4.1.2011.6.128.1.1.2.130.1.5 |
hwXponDynamicMacQueryPara2This object indicates the port ID of the ONT. HwXponDynamicMacQueryPara .1.3.6.1.4.1.2011.6.128.1.1.2.130.1.6 |
hwXponDynamicMacQueryPara3This object indicates the Fourth reserved Parameter of HwXponDynamicMacQueryEntry. HwXponDynamicMacQueryPara .1.3.6.1.4.1.2011.6.128.1.1.2.130.1.7 |
hwXponDynamicMacAddrMAC address.
When hwXponDynamicMacQueryType is 1 ,the MAC addresses which can include 5 MAC addresses at most, and its format is (XX.XX.XX.XX.XX.XX).
When hwXponDynamicMacQueryType is 2, 3 or 4, the query result contains MAC address entries with a length of 0-1280 bytes.
A maximum of 128 MAC addresses can be queried, each entry containing 10 bytes.
The queried entry is in a format of port type (1 byte)+port ID (1 byte)+VLAN ID (2 bytes)+MAC address (6 bytes),
where the blank field can be represented by 0, for example, 3401400000E0FC000001.
Range: 0-1280ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.130.1.8 |
hwGponDeviceUnboundGemPortQueryTableThis is the unbound GEM port query table in the profile mode.
The index of this table is a combination of ifIndex and hwGponDeviceUnboundGemPortId. SEQUENCE OF HwGponDeviceUnboundGemPortQueryEntry .1.3.6.1.4.1.2011.6.128.1.1.2.140 |
hwGponDeviceUnboundGemPortQueryEntryThis is the unbound GEM port query table in the profile mode.
The index of this entry is a combination of ifIndex and hwGponDeviceUnboundGemPortId. HwGponDeviceUnboundGemPortQueryEntry .1.3.6.1.4.1.2011.6.128.1.1.2.140.1 |
hwGponDeviceUnboundGemPortIdThis object indicates the unbound GEM port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.140.1.1 |
hwGponDeviceUnboundGemPortServiceTypeThis object indicates the carried service type of the unbound GEM port.
Options:
1. tdm(1) - TDM
2. omci(2) - OMCI
3. eth(3) - ETH
4. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.140.1.2 |
hwGponDeviceUnboundGemPortEncryptThis object indicates the downstream encryption switch of the unbound GEM port.
Options:
1. on(1) - Indicates that the downstream encryption switch of the unbound GEM port is on
2. off(2) - Indicates that the downstream encryption switch of the unbound GEM port is off
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.140.1.3 |
hwGponDeviceUnboundGemPortCascadeThis object indicates the subtending attribute of the unbound GEM port.
Options:
1. on(1) - Indicates that the subtending attribute of the unbound GEM port is on
2. off(2) - Indicates that the subtending attribute of the unbound GEM port is off
3. invalid(-1) - Indicates that the query fails or no information is detectedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.140.1.4 |
hwGponDeviceUnboundGemPortDescriptionThis object indicates the unbound GEM port description.ro OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.140.1.5 |
hwGponDeviceUnboundGemPortEntryStatusThe hwGponDeviceUnboundGemPortEntryStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.140.1.6 |
hwGponDeviceOntGemPortBindTableThis is ONT GEM port configuration table. This table is used to
configure the mapping relation between the T-CONT and GEM port of an ONT.
The index of this table is a combination of ifIndex and hwGponDeviceOntGemPortBindGemPortId. SEQUENCE OF HwGponDeviceOntGemPortBindEntry .1.3.6.1.4.1.2011.6.128.1.1.2.141 |
hwGponDeviceOntGemPortBindEntryThis is ONT GEM port configuration table. This table is used to
configure the mapping relation between the T-CONT and GEM port of an ONT.
The index of this entry is a combination of ifIndex and hwGponDeviceOntGemPortBindGemPortId. HwGponDeviceOntGemPortBindEntry .1.3.6.1.4.1.2011.6.128.1.1.2.141.1 |
hwGponDeviceOntGemPortBindGemPortIdThis object indicates the ONT GEM Port ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.141.1.1 |
hwGponDeviceOntGemPortBindOntIdThis object indicates the ONT ID.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.141.1.2 |
hwGponDeviceOntGemPortBindTcontIdThis object indicates the T-CONT ID.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.141.1.3 |
hwGponDeviceOntGemPortBindUpPQIndexThis object indicates the up stream priority-queue index.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.141.1.4 |
hwGponDeviceOntGemPortBindTrafficTableIdThis object indicates the traffic table id of the GEM port.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.141.1.5 |
hwGponDeviceOntGemPortBindEntryStatusThe hwGponDeviceOntGemPortBindEntryStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.141.1.6 |
hwGponDeviceOntGemPortBindDownPQIndexThis object indicates the down stream priority-queue index.
0..7: Down Stream PQ index.
254 : Apaptive, Gemport Down Stream PQ is decided by ont.
-1 : Default Value.Gemport Down Stream PQ is decided by olt.rw Integer32 (-1 | 0..7 | 254) .1.3.6.1.4.1.2011.6.128.1.1.2.141.1.7 |
hwGponDeviceOntGemPortBindTrafficTableNameThis object indicates the traffic table name of the GEM port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.141.1.8 |
hwGponDeviceLineProfTcontRefTableThis is TCONTS configuration table in gpon mode.
This table is used to configure these TCONTS which are not binded dba-profile.
The index of this table is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceLineProfTcontRefIndex. SEQUENCE OF HwGponDeviceLineProfTcontRefEntry .1.3.6.1.4.1.2011.6.128.1.1.2.142 |
hwGponDeviceLineProfTcontRefEntryThis is TCONTS configuration table in gpon mode.
This table is used to configure these TCONTS which are not binded dba-profile.
The index of this entry is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceLineProfTcontRefIndex. HwGponDeviceLineProfTcontRefEntry .1.3.6.1.4.1.2011.6.128.1.1.2.142.1 |
hwGponDeviceLineProfTcontRefIndexThis object indicates the TCONT Index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.142.1.1 |
hwGponDeviceLineProfTcontNameThis object indicates the dba-profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.142.1.2 |
hwGponDeviceLineProfAllocIdThis object indicates the alloc ID.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.142.1.3 |
hwGponDeviceLineProfTcontRefEntryStatusThe hwGponDeviceLineProfTcontRefEntryStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.142.1.4 |
hwXponDeviceRogueOntTableThis is the rogue ONT list table. The index of this table is ifIndex. SEQUENCE OF HwXponDeviceRogueOntEntry .1.3.6.1.4.1.2011.6.128.1.1.2.143 |
hwXponDeviceRogueOntEntryThis is the rogue ONT list table. The index of this entry is ifIndex. HwXponDeviceRogueOntEntry .1.3.6.1.4.1.2011.6.128.1.1.2.143.1 |
hwXponDeviceRogueOntThis object indicates the rogue ont list.ro OntList .1.3.6.1.4.1.2011.6.128.1.1.2.143.1.1 |
hwEponDeviceOntLlidTableThis is the ONT LLID related configuration table.
The index of this table is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlidIndex. SEQUENCE OF HwEponDeviceOntLlidEntry .1.3.6.1.4.1.2011.6.128.1.1.2.144 |
hwEponDeviceOntLlidEntryThis is the ONT LLID related configuration table.
The index of this entry is a combination of ifIndex, hwEponDeviceOntIndex and hwEponDeviceOntLlidIndex. HwEponDeviceOntLlidEntry .1.3.6.1.4.1.2011.6.128.1.1.2.144.1 |
hwEponDeviceOntLlidIndexThis object indicates the EPON line profile LLID config Llid index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.144.1.1 |
hwEponDeviceOntLlidValueThis object indicates the value of Logical Link Identifier.ro Integer32 (-1 | 0..65535) .1.3.6.1.4.1.2011.6.128.1.1.2.144.1.2 |
hwEponDeviceOntLlidDbaProfileNameThis object indicates the name of the DBA profile.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.144.1.3 |
hwEponDeviceOntLlidCarTrafficTableIdThis object indicates the ONT Llid car profile id (1~1024, 0xfffe-unconcern).rw Integer32 (1..1024 | 65534) .1.3.6.1.4.1.2011.6.128.1.1.2.144.1.4 |
hwEponDeviceOntLlidCarTrafficTableNameThis object indicates the ONT Llid car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.144.1.5 |
hwEponDeviceOntPortVlanTableThis is the ONT port vlan configuration table.
The index of this table is a combination of ifIndex, hwEponOntPortVlanCfgOntPhyType, hwEponDeviceOntIndex,
hwEponOntPortVlanCfgOntPhyIndex and hwEponOntPortVlanCfgCVlan. SEQUENCE OF HwEponDeviceOntPortVlanEntry .1.3.6.1.4.1.2011.6.128.1.1.2.145 |
hwEponDeviceOntPortVlanEntryThis is the ONT port vlan configuration table.
The index of this entry is a combination of ifIndex, hwEponOntPortVlanCfgOntPhyType, hwEponDeviceOntIndex,
hwEponOntPortVlanCfgOntPhyIndex and hwEponOntPortVlanCfgCVlan. HwEponDeviceOntPortVlanEntry .1.3.6.1.4.1.2011.6.128.1.1.2.145.1 |
hwEponOntPortVlanCfgOntPhyTypeThis object indicates the port type of the ONT.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. moca(46) - MOCA
6. eth(47) - ETH
7. iphost(50) - IPHOST Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.145.1.1 |
hwEponOntPortVlanCfgOntPhyIndexThis object indicates the port index of the ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.145.1.2 |
hwEponOntPortVlanCfgCVlanThis object indicates the epon ont port customer vlan. When the vlan mode is transparent, should input 65534 (0xfffe). Integer32 (1..4094 | 65534) .1.3.6.1.4.1.2011.6.128.1.1.2.145.1.3 |
hwEponOntPortVlanCfgSVlanThis object indicates the epon ont port service vlan.rw Integer32 (-1 | 1..4094) .1.3.6.1.4.1.2011.6.128.1.1.2.145.1.4 |
hwEponOntPortVlanCfgTypeThis object indicates the xpon service profile port vlan type.
Options:
1. transparent(1) - Indicates that the XPON service profile port vlan type is transparent
2. translation(2) - Indicates that the XPON service profile port vlan type is translation
3. invalid(-1) - Indicates that the XPON service profile port vlan type is invalidrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.145.1.5 |
hwEponOntPortVlanCfgRowstatusRow status. This object is used to differentiate the
creation, modification and deletion operations for an object.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.145.1.6 |
hwEponDeviceAlarmProfileInfoTableThis table is used to create, delete, modify or query the EPON alarm profile.
The index of this table is hwEponDeviceAlarmProfileInfoNameIndex. SEQUENCE OF HwEponDeviceAlarmProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.146 |
hwEponDeviceAlarmProfileInfoEntryThis table is used to create, delete, modify or query the EPON alarm profile.
The index of this entry is hwEponDeviceAlarmProfileInfoNameIndex. HwEponDeviceAlarmProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.2.146.1 |
hwEponDeviceAlarmProfileInfoNameIndexThis object indicates the name of EPON alarm profile. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.1 |
hwEponDeviceAlarmProfileBindNumThis object indicates the bind number of EPON alarm profile.ro Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.2 |
hwEponDeviceAlarmProfileTxDropEventsThresholdThis object indicates the down stream drop events threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.3 |
hwEponDeviceAlarmProfileTxDropEventsRestoreThresholdThis object indicates the down stream drop events restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.4 |
hwEponDeviceAlarmProfileRxDropEventsThresholdThis object indicates the up stream drop events threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.5 |
hwEponDeviceAlarmProfileRxDropEventsRestoreThresholdThis object indicates the up stream drop events restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.6 |
hwEponDeviceAlarmProfileTxCRCErrorFramesThresholdThis object indicates the down stream CRC error frames threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.7 |
hwEponDeviceAlarmProfileTxCRCErrorFramesRestoreThresholdThis object indicates the down stream CRC error frames restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.8 |
hwEponDeviceAlarmProfileRxCRCErrorFramesThresholdThis object indicates the up stream CRC error frames threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.9 |
hwEponDeviceAlarmProfileRxCRCErrorFramesRestoreThresholdThis object indicates the up stream CRC error frames restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.10 |
hwEponDeviceAlarmProfileTxUndersizeFramesThresholdThis object indicates the down stream under size frames threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.11 |
hwEponDeviceAlarmProfileTxUndersizeFramesRestoreThresholdThis object indicates the down stream under size frames restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.12 |
hwEponDeviceAlarmProfileRxUndersizeFramesThresholdThis object indicates the up stream under size frames threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.13 |
hwEponDeviceAlarmProfileRxUndersizeFramesRestoreThresholdThis object indicates the up stream under size frames restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.14 |
hwEponDeviceAlarmProfileTxOversizeFramesThresholdThis object indicates the down stream over size frames threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.15 |
hwEponDeviceAlarmProfileTxOversizeFramesRestoreThresholdThis object indicates the down stream over size frames restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.16 |
hwEponDeviceAlarmProfileRxOversizeFramesThresholdThis object indicates the up stream over size frames threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.17 |
hwEponDeviceAlarmProfileRxOversizeFramesRestoreThresholdThis object indicates the up stream over size frames restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.18 |
hwEponDeviceAlarmProfileTxFragmentsThresholdThis object indicates the down stream fragments threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.19 |
hwEponDeviceAlarmProfileTxFragmentsRestoreThresholdThis object indicates the down stream fragments restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.20 |
hwEponDeviceAlarmProfileRxFragmentsThresholdThis object indicates the up stream fragments threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.21 |
hwEponDeviceAlarmProfileRxFragmentsRestoreThresholdThis object indicates the up stream fragments restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.22 |
hwEponDeviceAlarmProfileTxJabbersThresholdThis object indicates the down stream jabbers threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.23 |
hwEponDeviceAlarmProfileTxJabbersRestoreThresholdThis object indicates the down stream jabbers restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.24 |
hwEponDeviceAlarmProfileRxJabbersThresholdThis object indicates the up stream jabbers threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.25 |
hwEponDeviceAlarmProfileRxJabbersRestoreThresholdThis object indicates the up stream jabbers restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.26 |
hwEponDeviceAlarmProfileTxDiscardsThresholdThis object indicates the down stream discards threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.27 |
hwEponDeviceAlarmProfileTxDiscardsRestoreThresholdThis object indicates the down stream discards restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.28 |
hwEponDeviceAlarmProfileRxDiscardsThresholdThis object indicates the up stream discards threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.29 |
hwEponDeviceAlarmProfileRxDiscardsRestoreThresholdThis object indicates the up stream discards restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.30 |
hwEponDeviceAlarmProfileTxErrorsThresholdThis object indicates the down stream errors threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.31 |
hwEponDeviceAlarmProfileTxErrorsRestoreThresholdThis object indicates the down stream errors restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.32 |
hwEponDeviceAlarmProfileRxErrorsThresholdThis object indicates the up stream errors threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.33 |
hwEponDeviceAlarmProfileRxErrorsRestoreThresholdThis object indicates the up stream errors restore threshold of EPON alarm profile.rw Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.34 |
hwEponDeviceAlarmProfileRowStatusThis object is used to create a new row or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.146.1.35 |
hwGponDeviceOntPortVlanTableThis table is used to create, delete, modify or query GPON ONT's distributed port vlan.
The index of this table is ifIndex, hwGponDeviceOntIndex, hwGponDeviceOntPortVlanPhyType,
hwGponDeviceOntPortVlanPhyIndex, hwGponDeviceOntPortVlanCVlan, hwGponDeviceOntPortVlanCPri, hwGponDeviceOntPortVlanEtherType. SEQUENCE OF HwGponDeviceOntPortVlanEntry .1.3.6.1.4.1.2011.6.128.1.1.2.147 |
hwGponDeviceOntPortVlanEntryThis table is used to create, delete, modify or query GPON ONT's distributed port vlan.
The index of this entry is ifIndex, hwGponDeviceOntIndex, hwGponDeviceOntPortVlanPhyType,
hwGponDeviceOntPortVlanPhyIndex, hwGponDeviceOntPortVlanCVlan, hwGponDeviceOntPortVlanCPri, hwGponDeviceOntPortVlanEtherType. HwGponDeviceOntPortVlanEntry .1.3.6.1.4.1.2011.6.128.1.1.2.147.1 |
hwGponDeviceOntPortVlanPhyTypeThis object indicates the port type of the ONT.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. vdsl(37) - VDSL
6. wifi(40) - WiFi
7. moca(46) - MOCA
8. eth(47) - ETH
9. iphost(50) - IPHOST Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.1 |
hwGponDeviceOntPortVlanPhyIndexThis object indicates the port index of the ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.2 |
hwGponDeviceOntPortVlanCVlanThis object indicates the port customer vlan distributed configured on GPON ONT. When the vlan mode is transparent, the custom vlan should be 65534 (0xfffe).
When the vlan type is q-in-q and user vlan attribute is untagged, custom vlan should be 0xfffd(65533). Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.3 |
hwGponDeviceOntPortVlanCPriThis object indicates the port translation or qinq c-priority distributed configured on GPON ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.4 |
hwGponDeviceOntPortVlanEtherTypeThis object indicates customer service encapsulation type distributed configured on GPON ONT.
Options:
1. ipv4-ipoe(1) - Indicates that the customer service encapsulation type is ipv4 ipoe
2. pppoe(2) - Indicates that the customer service encapsulation type is pppoe
3. ipv6-ipoe(4) - Indicates that the customer service encapsulation type is ipv6 ipoe
4. invalid(-1) - Indicates that don't specify the customer service encapsulation type
5. 0x600-0xffff - Indicates that the customer service encapsulation type is user-defined Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.5 |
hwGponDeviceOntPortVlanCfgTypeThis object indicates the port vlan type distributed configured on GPON ONT.
Options:
1. transparent(1) - Indicates that the port vlan type distributed configured on GPON ONT is transparent
2. translation(2) - Indicates that the port vlan type distributed configured on GPON ONT is translation distributed configured on GPON ONT
3. qinq(3) - Indicates that the port vlan type distributed configured on GPON ONT is qinq
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.6 |
hwGponDeviceOntPortVlanSVlanThis object indicates the port service vlan distributed configured on GPON ONT.rw Integer32 (-1 | 0..4095) .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.7 |
hwGponDeviceOntPortVlanSPriThis object indicates the port translation or qinq s-priority distributed configured on GPON ONT.rw Integer32 (-1|0..7) .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.8 |
hwGponDeviceOntPortVlanSPriPolicyThis object indicates the s-vlan priority policy distributed configured on GPON ONT.
Options:
1. specify(1) - Indicates that the s-vlan priority policy is specified
2. userCos(2) - Indicates that the s-vlan priority policy is userCos
3. dscpMapping(3) - Indicates that the s-vlan priority policy is dscpMapping
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.9 |
hwGponDeviceOntPortVlanDscpDefaultPriThis object indicates the default priority for dscpMapping policy.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.10 |
hwGponDeviceOntPortVlanRowStatusThe hwGponDeviceOntPortVlanRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.2.147.1.11 |
hwXponDeviceProfileObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1.1.3 |
hwXponDeviceDbaProfileInfoTableThis is the DBA profile table. This table is used to create a DBA profile,
and is used to modify or delete a DBA profile which is not bound.
The index of this table is hwXponDeviceDbaProfileInfoNameIndex. SEQUENCE OF HwXponDeviceDbaProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.21 |
hwXponDeviceDbaProfileInfoEntryThis is the DBA profile table. This table is used to create a DBA profile,
and is used to modify or delete a DBA profile which is not bound.
The index of this entry is hwXponDeviceDbaProfileInfoNameIndex. HwXponDeviceDbaProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.21.1 |
hwXponDeviceDbaProfileInfoNameIndexThis object indicates the DBA profile name. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.1 |
hwXponDeviceDbaProfileTypeThis object indicates the DBA profile type.
The value (1) indicates that the DBA profile type is Type 1.
The value (2) indicates that the DBA profile type is Type 2.
The value (3) indicates that the DBA profile type is Type 3.
The value (4) indicates that the DBA profile type is Type 4.
The value (5) indicates that the DBA profile type is Type 5.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.2 |
hwXponDeviceDbaProfileFixedRateThis object indicates the fixed bandwidth of the profile, unit Kbps.
The value (0) is invalid value.rw Integer32 (0 | 128..10000000) .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.3 |
hwXponDeviceDbaProfileAssuredRateThis object indicates the assured bandwidth of the profile, unit Kbps.
The value (0) is invalid value.rw Integer32 (0 | 128..10000000) .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.4 |
hwXponDeviceDbaProfileMaxRateThis object indicates the max bandwidth of the profile, unit Kbps.
The value (0) is invalid value.rw Integer32 (0 | 128..10000000) .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.5 |
hwXponDeviceDbaProfileReferenceNumThis object indicates the binding times of the profile.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.6 |
hwXponDeviceDbaProfileBandwithCompensateThis object indicates the bandwidth compensation policy of the profile.
Options:
1. enable(1) - Enable the bandwidth compensation policy of the profile
2. disable(2) - Disable the bandwidth compensation policy of the profilerw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.7 |
hwXponDeviceDbaProfileEntryStatusThe hwXponDeviceDbaProfileEntryStatus is used to create a new row or to modify
or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.8 |
hwXponDeviceDbaProfileFixDelayFix delay switch of the profile.
Options:
1. enable(1) -Fix delay switch of the profile is enable
2. disable(2) -Fix delay switch of the profile is disablerw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.9 |
hwXponDeviceDbaProfileAdditionalBWAdditional bandwidth type of the profile.
Options:
1. nonAssure(1) -Additional bandwidth type of the profile is non assure
2. bestEffort(2) -Additional bandwidth type of the profile is best effort
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.10 |
hwXponDeviceDbaProfilePriorityThis object is used to set best effort bandwidth assignment priority.
Ranging from 0 to 7, 0 is the lowest priority.
The default value is 0.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.11 |
hwXponDeviceDbaProfileWeightThis object is used to set best effort bandwidth assignment weight.
Ranging from 1 to 10000.
The default value is 128.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.12 |
hwXponDeviceDbaProfileOperateResultThis object indicates the commit result of a DBA profile, the aging time of the result is 20s.
Options:
This node identifies the result of DBA profile commit:
Value 0 indicates the commit result is successfully.
Value 1~0xFFFFFFFF-2 indicates the commit result is fail and return error code.
Value 0xFFFFFFFD indicates that the commit does not complete
Value 0xFFFFFFFE indicates that no commit is being operated
Value 0xFFFFFFFF indicates invalidro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.13 |
hwXponDeviceDbaProfileAsynCommitThis object indicates the mode of commit of a DBA profile
Options:
1. asynMode (1) - Indicates that the commit mode is asynchronous
2. invalid(-1) - Invalid value
The device will perform sync mode without the mib node.rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.21.1.14 |
hwXponDeviceOntSnmpProfileInfoTableThis table is the SNMP parameter management profile of the ONT.
The index of this table is hwXponDeviceOntSnmpProfileInfoNameIndex. SEQUENCE OF HwXponDeviceOntSnmpProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.22 |
hwXponDeviceOntSnmpProfileInfoEntryThis table is the SNMP parameter management profile of the ONT.
The index of this entry is hwXponDeviceOntSnmpProfileInfoNameIndex. HwXponDeviceOntSnmpProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.22.1 |
hwXponDeviceOntSnmpProfileInfoNameIndexThis object indicates the ONT SNMP profile name. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.1 |
hwXponDeviceOntSnmpProfileVersionThis object indicates the SNMP version number.
Options:
1. v1(1) - Indicates that the SNMP version is v1
2. v2c(2) - Indicates that the SNMP version is v2c
3. v3(3) - Indicates that the SNMP version is v3
The default value is v1(1).rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.2 |
hwXponDeviceOntSnmpProfileReadCommunityNameThis object indicates the name of the read community.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.3 |
hwXponDeviceOntSnmpProfileWriteCommunityNameThis object indicates the name of the write community.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.4 |
hwXponDeviceOntSnmpProfileTrapHostIPThis object indicates the target host address of sending trap msg.rw IpAddress .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.5 |
hwXponDeviceOntSnmpProfileTrapHostSrcUDPPortThis object indicates the ID of the host UDP source port from which the trap is sent.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.6 |
hwXponDeviceOntSnmpProfileSecurityNameThis object indicates the securityname of SNMP msgrw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.7 |
hwXponDeviceOntSnmpProfileRowStatusThe hwXponDeviceOntSnmpProfileRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.8 |
hwXponDeviceOntSnmpProfileUsmUsernameThe name of the SNMPv3 user.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.9 |
hwXponDeviceOntSnmpProfileAuthenticationModeThis object indicates the user authentication mode.
When the version of the SNMP profile is v1 or v2c, the invalid value will be returned.
Options:
1. none(1) - No authentication mode
2. hmacMd5(2) - Hmac-md5 authentication mode
3. hmacSha(3) - Hmac-sha authentication mode
4. invalid(255) - Invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.10 |
hwXponDeviceOntSnmpProfileAuthenticationPasswordThe authentication password.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.11 |
hwXponDeviceOntSnmpProfilePrivacyModeThis object indicates the user encryption mode.
When the version of the SNMP profile is v1 or v2c, the invalid value will be returned.
Options:
1. none(1) - No encryption mode
2. des56(2) - 56-bit DES encryption mode
3. tripleDes(3) - 3DES encryption mode
4. aes128(4) - 128-bit AES encryption mode
5. aes192(20) - 192-bit AES encryption mode
6. aes256(21) - 256-bit AES encryption mode
7. invalid(255) - Invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.12 |
hwXponDeviceOntSnmpProfilePrivacyPasswordThe encryption password.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.13 |
hwXponDeviceOntSnmpProfileSecurityLevelThis object indicates the trap security level.
When the version of the SNMP profile is v1 or v2c, the invalid value will be returned.
Options:
1. privacy(1) - Authenticate and encrypt the SNMPv3 trap packet
2. authentication(2) - Authenticate but not encrypt the SNMPv3 trap packet
3. noauthnopriv(3) - Not authenticate nor encrypt the SNMPv3 trap packet
4. invalid(255) - Invalid valuerw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.22.1.14 |
hwXponDeviceOntPortClassTableThe configuration table of the XPON classification.
The index of this table is a combination of hwXponDeviceOntPortClassProfileIdIndex,
hwXponDeviceOntPortClassPrecedenceIndex and hwXponDeviceOntPortClassConditionIndex. SEQUENCE OF HwXponDeviceOntPortClassEntry .1.3.6.1.4.1.2011.6.128.1.1.3.23 |
hwXponDeviceOntPortClassEntryThe configuration table of the XPON classification.
The index of this entry is a combination of hwXponDeviceOntPortClassProfileIdIndex,
hwXponDeviceOntPortClassPrecedenceIndex and hwXponDeviceOntPortClassConditionIndex. HwXponDeviceOntPortClassEntry .1.3.6.1.4.1.2011.6.128.1.1.3.23.1 |
hwXponDeviceOntPortClassProfileIdIndexThis object indicates the profile index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.1 |
hwXponDeviceOntPortClassPrecedenceIndexThis object indicates the precedence-rule Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.2 |
hwXponDeviceOntPortClassConditionIndexThis object indicates the conditionindex-condition. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.3 |
hwXponDeviceOntPortClassProfileRefNumThis object indicates the profile binding times.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.4 |
hwXponDeviceOntPortClassProfileNameThis object indicates the profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.5 |
hwXponDeviceOntPortClassProfileQueuemappedThis object indicates the mapping queue.
The valid value range is 0~255.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.6 |
hwXponDeviceOntPortClassProfilePriMarkThis object indicates the priority mark.
The valid value range is 0~7,255.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.7 |
hwXponDeviceOntPortClassProfileFieldselectThis object indicates the field selected corresponding the condition.
The value (0) indicates that the field is classified by destination MAC.
The value (1) indicates that the field is classified by source MAC.
The value (2) indicates that the field is classified by ethernet user priority.
The value (3) indicates that the field is classified by VLAN ID.
The value (4) indicates that the field is classified by ETH type.
The value (5) indicates that the field is classified by destination IPv4 address.
The value (6) indicates that the field is classified by source IPv4 address.
The value (7) indicates that the field is classified by IP protocol type.
The value (8) indicates that the field is classified by IPv4 DSCP.
The value (9) indicates that the field is classified by IPv6 DSCP.
The value (10) indicates that the field is classified by source port of layer 4 protocol.
The value (11) indicates that the field is classified by destination port of layer 4 protocol.
The value (12) indicates that the field is classified by IP version.
The value (13) indicates that the field is classified by IPv6 flow label.
The value (14) indicates that the field is classified by destination IPv6 address.
The value (15) indicates that the field is classified by source IPv6 address.
The value (16) indicates that the field is classified by prefix of destination IPv6 address.
The value (17) indicates that the field is classified by prefix of source IPv6 address.
The value (18) indicates that the field is classified by IPv6 next header.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.8 |
hwXponDeviceOntPortClassProfileOperatorThis object indicates the operator flag.
The value (0) indicates that the operator flag is never match.
The value (1) indicates that the operator flag is equal.
The value (2) indicates that the operator flag is not equal.
The value (3) indicates that the operator flag is less than or equal.
The value (4) indicates that the operator flag is greater or equal.
The value (5) indicates that the operator flag is true if field exists.
The value (6) indicates that the operator flag is true if field not exist.
The value (7) indicates that the operator flag is always match.
The value (-1) indicates that the query fails or no information is detectedrw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.9 |
hwXponDeviceOntPortClassProfileMatchValueThis object indicates the match values.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.10 |
hwXponDeviceOntPortClassProfileRowStatusThe hwXponDeviceOntPortClassProfileRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.23.1.11 |
hwEponDeviceLineProfileInfoTableThis is the EPON line profile table. This table is used to create a EPON line profile.
The index of this table is hwEponDeviceLineProfileInfoNameIndex. SEQUENCE OF HwEponDeviceLineProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.41 |
hwEponDeviceLineProfileInfoEntryThis is the EPON line profile table. This table is used to create a EPON line profile.
The index of this entry is hwEponDeviceLineProfileInfoNameIndex. HwEponDeviceLineProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.41.1 |
hwEponDeviceLineProfileInfoNameIndexThis object indicates the EPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.41.1.1 |
hwEponDeviceLineProfileBindNumThis object indicates the number of ONT bound with EPON line profile.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.41.1.2 |
hwEponDeviceLineProfileFECThis object indicates the EPON line profile FEC switch.
Options:
1. enable (1) - Enable the EPON line profile FEC switch
2. disable (2) - Disable the EPON line profile FEC switch
3. invalid (-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.41.1.3 |
hwEponDeviceLineProfileCommitThis object indicates the EPON line profile configuration commit.
Options:
1. commitExecute(1) - Execute the EPON line profile configuration commit
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.41.1.4 |
hwEponDeviceLineProfileRowStatusThe hwEponDeviceLineProfileRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.41.1.5 |
hwEponDeviceLineProfileTr069ManagementIpIndexThe index of IP host which used by TR069.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.41.1.6 |
hwEponDeviceLineProfLlidCfgTableThis is the XPON line profile LLID config table. This table is used to configure epon LLID.
The index of this table is a combination of hwEponLineProfLlidCfgLineProfNameIndex,
and hwEponLineProfLlidCfgLlidIndex. SEQUENCE OF HwEponDeviceLineProfLlidCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.42 |
hwEponDeviceLineProfLlidCfgEntryThis is the XPON line profile LLID config table. This table is used to configure epon LLID.
The index of this entry is a combination of hwEponLineProfLlidCfgLineProfNameIndex,
and hwEponLineProfLlidCfgLlidIndex. HwEponDeviceLineProfLlidCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.42.1 |
hwEponLineProfLlidCfgLineProfNameIndexThis object indicates the XPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.1 |
hwEponLineProfLlidCfgLlidIndexThis object indicates the XPON line profile LLID config Llid index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.2 |
hwEponLineProfLlidCfgCarTrafficTableIdThis object indicates the XPON line profile LLID config car profile index(1~1024, 0xfffe-unconcern).rw Integer32 (1..1024 | 65534) .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.3 |
hwEponLineProfLlidCfgDbaProfileNameThis object indicates the XPON line profile LLID config DBA profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.4 |
hwEponLineProfLlidCfgEncryptModeThis object indicates the XPON line profile LLID config gem encryp mode.
Options:
1. aes128(1) - Indicates that the XPON line profile LLID config gem encrypt mode is aes128
2. triplechurning(2) - Indicates that the XPON line profile LLID config gem encrypt mode is triple churning
3. off(3) - Indicates that the XPON line profile LLID config gem encrypt mode is offrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.5 |
hwEponLineProfLlidCfgQueueSetIndex1ReportBitMapThis object indicates the XPON line profile LLID config queue-set-1 report bitmap.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.6 |
hwEponLineProfLlidCfgQueueSetIndex1ThresholdThis object indicates the XPON line profile LLID config queue-set-1 threshold value.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.7 |
hwEponLineProfLlidCfgQueueSetIndex2ReportBitMapThis object indicates the XPON line profile LLID config queue-set-2 report bitmap.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.8 |
hwEponLineProfLlidCfgQueueSetIndex2ThresholdThis object indicates the XPON line profile LLID config queue-set-2 threshold value.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.9 |
hwEponLineProfLlidCfgQueueSetIndex3ReportBitMapThis object indicates the XPON line profile LLID config queue-set-3 report bitmap.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.10 |
hwEponLineProfLlidCfgQueueSetIndex3ThresholdThis object indicates the XPON line profile LLID config queue-set-3 threshold value.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.11 |
hwEponLineProfLlidCfgRowStatusThe hwEponLineProfLlidCfgRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.12 |
hwEponLineProfLlidCfgCarTrafficTableNameThis object indicates the XPON line profile LLID config car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.42.1.13 |
hwEponDeviceSrvProfileInfoTableThis is the EPON service profile table.
The index of this table is hwEponDeviceSrvProfileInfoNameIndex. SEQUENCE OF HwEponDeviceSrvProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.43 |
hwEponDeviceSrvProfileInfoEntryThis is the EPON service profile table.
The index of this entry is hwEponDeviceSrvProfileInfoNameIndex. HwEponDeviceSrvProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.43.1 |
hwEponDeviceSrvProfileInfoNameIndexThis object indicates the EPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.43.1.1 |
hwEponDeviceSrvProfileBindNumThis object indicates the number of ONT bound with EPON service profile.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.43.1.2 |
hwEponDeviceSrvProfileCommitThis object indicates the EPON service profile configuration commit.
Options:
1. commitExecute(1) - Execute the EPON service profile configuration commit
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.43.1.3 |
hwEponDeviceSrvProfileRowStatusThe hwEponDeviceSrvProfileRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.43.1.4 |
hwEponDeviceSrvProfileOntCfgTableThis is the EPON service profile ont config table.
The index of this table is hwEponDeviceSrvProfOntCfgSrvProfNameIndex. SEQUENCE OF HwEponDeviceSrvProfileOntCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.44 |
hwEponDeviceSrvProfileOntCfgEntryThis is the EPON service profile ont config table.
The index of this entry is hwEponDeviceSrvProfOntCfgSrvProfNameIndex. HwEponDeviceSrvProfileOntCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.44.1 |
hwEponDeviceSrvProfOntCfgSrvProfNameIndexThis object indicates the EPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.1 |
hwEponDeviceSrvProfilePotsNumThis object indicates the XPON service profile pots port number.
A special value of 0xFE (254) indicates the number
of port is adaptive.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.2 |
hwEponDeviceSrvProfileEthNumThis object indicates the XPON service profile eth port number.
A special value of 0xFE (254) indicates the number
of port is adaptive.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.3 |
hwEponDeviceSrvProfileTdmPortNumThis object indicates the XPON service profile tdm port number.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.4 |
hwEponDeviceSrvProfileTdmPortTypeThis object indicates the XPON service profile tdm port type.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.5 |
hwEponDeviceSrvProfileMulticastModeThis object indicates the XPON service profile multicast mode.
Options:
1. ctc(1) - Indicates that the XPON service profile multicast mode is CTC
2. igmpsnooping(2) - Indicates that the XPON service profile multicast mode is igmp snooping
3. transparent(3) - Indicates that the XPON service profile multicast mode is transparent
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.6 |
hwEponDeviceSrvProfileMulticastQuickLeaveSwitchThis object indicates the XPON service profile multicast quick leave switch.
Options:
1. enable(1) - Enable the XPON service profile multicast quick leave switch
2. disable(2) - Disable the XPON service profile multicast quick leave switch
3. unconcern(254) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.7 |
hwEponDeviceSrvProfileRingCheckSwitchThis object indicates the XPON service profile ring check function switch.
Options:
1. enable(1) - Enable the XPON service profile ring check function switch
2. disable(2) - Disable the XPON service profile ring check function switch
3. unconcern(254) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.8 |
hwEponDeviceSrvProfileRingCheckAutoShutdownSwitchThis object indicates the XPON service profile ring check auto shutdown function switch
Options:
1. enable(1) - Indicates that the XPON service profile ring check auto shutdown switch enable.
2. disable(2) - Indicates that the XPON service profile ring check auto shutdown switch disable.
3. unconcern(254) - Indicates that the XPON service profile ring check auto shutdown switch unconcern.rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.9 |
hwEponDeviceSrvProfileMaxNumOfAdapPotsPortThis object indicates the max number of adaptive pots ports.
Range: 1-32. 32 is default value.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.10 |
hwEponDeviceSrvProfileMaxNumOfAdapEthPortThis object indicates the max number of adaptive eth ports.
Range: 1-24. 8 is default value.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.44.1.11 |
hwEponDeviceSrvProfMulticastVlanCfgTableThis is the EPON service profile multicast vlan config table.
The index of this table is a combination of hwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndex,
hwEponDeviceSrvProfMulticastVlanCfgOntPhyType, hwEponDeviceSrvProfMulticastVlanCfgOntPhyIndex
and hwEponDeviceSrvProfMulticastVlanCfgMulticastVlan. SEQUENCE OF HwEponDeviceSrvProfMulticastVlanCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.45 |
hwEponDeviceSrvProfMulticastVlanCfgEntryThis is the EPON service profile multicast vlan config table.
The index of this entry is a combination of hwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndex,
hwEponDeviceSrvProfMulticastVlanCfgOntPhyType, hwEponDeviceSrvProfMulticastVlanCfgOntPhyIndex
and hwEponDeviceSrvProfMulticastVlanCfgMulticastVlan. HwEponDeviceSrvProfMulticastVlanCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.45.1 |
hwEponDeviceSrvProfMulticastVlanCfgSrvProfNameIndexThis object indicates the XPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.45.1.1 |
hwEponDeviceSrvProfMulticastVlanCfgOntPhyTypeThis object indicates the port type of the ONT.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. moca(46) - MOCA
6. eth(47) - ETH
7. iphost(50) - IPHOST Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.45.1.2 |
hwEponDeviceSrvProfMulticastVlanCfgOntPhyIndexThis object indicates the port index of the ONT Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.45.1.3 |
hwEponDeviceSrvProfMulticastVlanCfgMulticastVlanThis object indicates the EPON service profile multicast vlan. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.45.1.4 |
hwEponDeviceSrvProfMulticastVlanCfgRowStatusThe hwEponDeviceSrvProfMulticastVlanCfgRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.45.1.5 |
hwEponDeviceSrvProfMulticastVlanCfgTranslatedVlanThis object indicates the EPON service profile multicast translated VLAN.rw Integer32 (-1 | 1..4093) .1.3.6.1.4.1.2011.6.128.1.1.3.45.1.6 |
hwEponDeviceSrvProfPortVlanCfgTableThis is the EPON service profile port vlan config table.
The index of this table is a combination of hwEponDeviceSrvProfPortVlanCfgSrvProfNameIndex,
hwEponDeviceSrvProfPortVlanCfgOntPhyType, hwEponDeviceSrvProfPortVlanCfgOntPhyIndex
and hwEponDeviceSrvProfPortVlanCfgPortCVlan. SEQUENCE OF HwEponDeviceSrvProfPortVlanCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.46 |
hwEponDeviceSrvProfPortVlanCfgEntryThis is the EPON service profile port vlan config table.
The index of this entry is a combination of hwEponDeviceSrvProfPortVlanCfgSrvProfNameIndex,
hwEponDeviceSrvProfPortVlanCfgOntPhyType, hwEponDeviceSrvProfPortVlanCfgOntPhyIndex
and hwEponDeviceSrvProfPortVlanCfgPortCVlan. HwEponDeviceSrvProfPortVlanCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.46.1 |
hwEponDeviceSrvProfPortVlanCfgSrvProfNameIndexThis object indicates the XPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.46.1.1 |
hwEponDeviceSrvProfPortVlanCfgOntPhyTypeThis object indicates the port type of the ONT.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. moca(46) - MOCA
6. eth(47) - ETH
7. iphost(50) - IPHOST Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.46.1.2 |
hwEponDeviceSrvProfPortVlanCfgOntPhyIndexThis object indicates the port index of the ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.46.1.3 |
hwEponDeviceSrvProfPortVlanCfgPortVlanTypeThis object indicates the XPON service profile port vlan type.
Options:
1. transparent(1) - Indicates that the XPON service profile port vlan type is transparent
2. translation(2) - Indicates that the XPON service profile port vlan type is translation
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.46.1.4 |
hwEponDeviceSrvProfPortVlanCfgPortCVlanThis object indicates the EPON service profile port customer vlan.
The value 65534 indicates that the vlan mode of ont's port is transparent. Integer32 (1..4094 | 65534) .1.3.6.1.4.1.2011.6.128.1.1.3.46.1.5 |
hwEponDeviceSrvProfPortVlanCfgPortSVlanThis object indicates the EPON service profile port service vlan.
The value(-1) is invalid value.rw Integer32 (-1 | 1..4094) .1.3.6.1.4.1.2011.6.128.1.1.3.46.1.6 |
hwEponDeviceSrvProfPortVlanCfgRowStatusThe hwEponDeviceSrvProfPortVlanCfgRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.46.1.7 |
hwEponDeviceSrvProfOntPortCfgTableThis is the EPON service profile ont port config table.
The index of this table is a combination of hwEponDeviceSrvProfOntPortCfgSrvProfNameIndex,
hwEponDeviceSrvProfOntPortCfgOntPhyType and hwEponDeviceSrvProfOntPortCfgOntPhyIndex. SEQUENCE OF HwEponDeviceSrvProfOntPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.47 |
hwEponDeviceSrvProfOntPortCfgEntryThis is the EPON service profile ont port config table.
The index of this entry is a combination of hwEponDeviceSrvProfOntPortCfgSrvProfNameIndex,
hwEponDeviceSrvProfOntPortCfgOntPhyType and hwEponDeviceSrvProfOntPortCfgOntPhyIndex. HwEponDeviceSrvProfOntPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.47.1 |
hwEponDeviceSrvProfOntPortCfgSrvProfNameIndexThis object indicates the XPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.1 |
hwEponDeviceSrvProfOntPortCfgOntPhyTypeThis object indicates the port type of the ONT.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. moca(46) - MOCA
6. eth(47) - ETH
7. iphost(50) - IPHOST Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.2 |
hwEponDeviceSrvProfOntPortCfgOntPhyIndexThis object indicates the port index of the ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.3 |
hwEponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableIdThis object indicates the XPON service profile ont port up-stream car profile id.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.4 |
hwEponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableIdThis object indicates the XPON service profile ont port down-stream car profile id.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.5 |
hwEponDeviceSrvProfOntPortCfgMaxMacAddressNumThis object indicates the XPON service profile ont port max mac-address number.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.6 |
hwEponDeviceSrvProfOntPortCfgClassProfileIndexThis object indicates the XPON service profile port config class profile index.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.7 |
hwEponDeviceSrvProfOntPortCfgMulticastStripSwitchThis object indicates the XPON service profile multicast strip switch.
Options:
1. tag(1) - Indicates that the XPON service profile multicast strip switch is tag
2. untag(2) - Indicates that the XPON service profile multicast strip switch is untag
3. translation(3) - Indicates that the XPON service profile multicast strip switch is translation
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.8 |
hwEponDeviceSrvProfOntPortCfgMaxGroupNumThis object indicates the max multicast group num on port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.9 |
hwEponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableNameThis object indicates the XPON service profile ont port up-stream car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.10 |
hwEponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableNameThis object indicates the XPON service profile ont port down-stream car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.47.1.11 |
hwGponDeviceLineProfileInfoTableThis is the GPON line profile table. This table is used to create a GPON line profile.
The index of this table is hwGponDeviceLineProfileInfoNameIndex. SEQUENCE OF HwGponDeviceLineProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.61 |
hwGponDeviceLineProfileInfoEntryThis is the GPON line profile table. This table is used to create a GPON line profile.
The index of this entry is hwGponDeviceLineProfileInfoNameIndex. HwGponDeviceLineProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.61.1 |
hwGponDeviceLineProfileInfoNameIndexThis object indicates the GPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.1 |
hwGponDeviceLineProfileBindNumThis object indicates the number of ONT bound with GPON line profile.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.2 |
hwGponDeviceLineProfileUpFECThis object indicates the GPON line profile upstream FEC.
Options:
1. enable (1) - Enable the GPON line profile upstream FEC
2. disable (2) - Disable the GPON line profile upstream FECrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.3 |
hwGponDeviceLineProfileMappingModeThis object indicates the GPON line profile mapping mode.
Options:
1. vlan(1) - The GPON line profile mapping mode is vlan
2. pri8021p(2) - The GPON line profile mapping mode is 802.1p
3. vlanpri(3) - The GPON line profile mapping mode is vlan and 802.1p
4. port(4) - The GPON line profile mapping mode is port
5. vlanport(5) - The GPON line profile mapping mode is vlan and port
6. portpri(6) - The GPON line profile mapping mode is port and 802.1p
7. vlanpriport(7) - The GPON line profile mapping mode is vlan, port and 802.1p
8. e1t1(8) - The GPON line profile mapping mode is the port of e1 and t1
9. iptos(9) - The GPON line profile mapping mode is iptos
10. vlaniptos(10) - The GPON line profile mapping mode is vlan and iptos
11. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.4 |
hwGponDeviceLineProfileQosModeThis object indicates the GPON line profile QOS mode.
Options:
1. pq(1) - The GPON line profile QOS mode is PQ
2. gemcar(2) - The GPON line profile QOS mode is the gemcar
3. flowcar(3) - The GPON line profile QOS mode is the flowcarrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.5 |
hwGponDeviceLineProfileCommitThis object indicates the GPON Line Profile Configuration Commit.
Options:
1. commitExecute(1) - Execute the GPON line profile configuration commit
2. clearResult(2) - Clear the commit result
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.6 |
hwGponDeviceLineProfileRowStatusThe hwGponDeviceLineProfileRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.7 |
hwGponDeviceLineProfileOMCCEncryptThis object indicates the GPON line profile OMCC downstream encrypt status.
Options:
1. on(1) - Indicates that the GPON line profile OMCC downstream encrypt status is on
2. off(2) - Indicates that the GPON line profile OMCC downstream encrypt status is offrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.8 |
hwGponDeviceLineProfileTr069ManagementSwitchThis object indicates the GPON line profile tr069 management status.
Options:
1. enable(1) - Enable the GPON line profile tr069 management status
2. disable(2) - Disable the GPON line profile tr069 management statusrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.9 |
hwGponDeviceLineProfileCommitResultThis object indicates the commit result of a GPON line profile, the aging time of the result is 20s.
Options:
1. success(1) - Indicates that the commit result is success
2. fail(2) - Indicates that the commit result is fail
3. operating(3) - Indicates that the commit does not complete
4. invalid(-1) - Indicates that no commit is being operatedro Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.11 |
hwGponDeviceLineProfileTr069ManagementIpIndexThe index of IP host which used by TR069.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.61.1.12 |
hwGponDeviceLineProfTcontCfgTableThis is the XPON line profile tcont config table. This table is used to configure tcont.
The index of this table is a combination of hwGponDeviceLineProfTcontCfgLineProfNameIndex,
and hwGponDeviceLineProfTcontCfgTcontIndex. SEQUENCE OF HwGponDeviceLineProfTcontCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.62 |
hwGponDeviceLineProfTcontCfgEntryThis is the XPON line profile tcont config table. This table is used to configure tcont.
The index of this entry is a combination of hwGponDeviceLineProfTcontCfgLineProfNameIndex,
and hwGponDeviceLineProfTcontCfgTcontIndex. HwGponDeviceLineProfTcontCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.62.1 |
hwGponDeviceLineProfTcontCfgLineProfNameIndexThis object indicates the XPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.62.1.1 |
hwGponDeviceLineProfTcontCfgTcontIndexThis object indicates the XPON line profile tcont index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.62.1.2 |
hwGponDeviceLineProfTcontCfgDbaProfileNameThis object indicates the XPON line profile tcont config DBA profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.62.1.3 |
hwGponDeviceLineProfTcontCfgRowStatusThe hwGponDeviceLineProfTcontCfgRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.62.1.4 |
hwGponDeviceLineProfGemCfgTableThis is the XPON line profile gem config table. This table is used to configure gem.
The index of this table is a combination of hwGponDeviceLineProfGemCfgLineProfNameIndex
and hwGponDeviceLineProfGemCfgGemIndex. SEQUENCE OF HwGponDeviceLineProfGemCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.63 |
hwGponDeviceLineProfGemCfgEntryThis is the XPON line profile gem config table. This table is used to configure gem.
The index of this entry is a combination of hwGponDeviceLineProfGemCfgLineProfNameIndex
and hwGponDeviceLineProfGemCfgGemIndex. HwGponDeviceLineProfGemCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.63.1 |
hwGponDeviceLineProfGemCfgLineProfNameIndexThis object indicates the XPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.1 |
hwGponDeviceLineProfGemCfgGemIndexThis object indicates the XPON line profile gem config gem index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.2 |
hwGponDeviceLineProfGemCfgCarTrafficTableIdThis object indicates the XPON line profile gem config car profile index.rw Integer32 (-1 | 1..1024) .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.3 |
hwGponDeviceLineProfGemCfgTcontIndexThis object indicates the XPON line profile gem config bind tcont index.rw Integer32 (-1 | 0..127) .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.4 |
hwGponDeviceLineProfGemCfgServiceTypeThis object indicates the XPON line profile gem config gem service type.
Options:
1. eth(1) - ETH
2. tdm(2) - TDMrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.5 |
hwGponDeviceLineProfGemCfgEncryptModeThis object indicates the XPON line profile gem config gem encrypt mode.
Options:
1. on(1) - Indicates that the XPON line profile gem config gem encrypt mode is on
2. off(2) - Indicates that the XPON line profile gem config gem encrypt mode is offrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.6 |
hwGponDeviceLineProfGemCfgCascadeModeThis object indicates the XPON line profile gem config gem cascade switch.
Options:
1. on(1) - Indicates that the XPON line profile gem config gem cascade switch is on
2. off(2) - Indicates that the XPON line profile gem config gem cascade switch is offrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.7 |
hwGponDeviceLineProfGemCfgUpPQIndexThis object indicates the XPON line profile gem config up stream PQ index.rw Integer32 (-1 | 0..7) .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.8 |
hwGponDeviceLineProfGemCfgRowStatusThe hwGponDeviceLineProfGemCfgRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.9 |
hwGponDeviceLineProfGemCfgDownPQIndexThis object indicates the XPON line profile gem config down stream PQ index.
0..7: Down Stream PQ index,
254 : Apaptive, Gemport Down Stream PQ is decided by ont.
-1 : Default Value.Gemport Down Stream PQ is decided by olt.rw Integer32 (-1 | 0..7 | 254) .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.10 |
hwGponDeviceLineProfGemCfgCarTrafficTableNameThis object indicates the XPON line profile gem config car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.63.1.11 |
hwGponDeviceLineProfMappingCfgTableThis is the XPON line profile flow config table.
This table is used to configure gem mapping to service.
The index of this table is a combination of hwGponDeviceLineProfMappingCfgLineProfNameIndex,
hwGponDeviceLineProfMappingCfgGemIndex and hwGponDeviceLineProfMappingCfgMappingIndex. SEQUENCE OF HwGponDeviceLineProfMappingCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.64 |
hwGponDeviceLineProfMappingCfgEntryThis is the XPON line profile flow config table.
This table is used to configure gem mapping to service.
The index of this entry is a combination of hwGponDeviceLineProfMappingCfgLineProfNameIndex,
hwGponDeviceLineProfMappingCfgGemIndex and hwGponDeviceLineProfMappingCfgMappingIndex. HwGponDeviceLineProfMappingCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.64.1 |
hwGponDeviceLineProfMappingCfgLineProfNameIndexThis object indicates the XPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.1 |
hwGponDeviceLineProfMappingCfgGemIndexThis object indicates the XPON line profile mapping config gem index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.2 |
hwGponDeviceLineProfMappingCfgMappingIndexThis object indicates the XPON line profile mapping config flow index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.3 |
hwGponDeviceLineProfMappingCfgMappingModeThis object indicates the XPON line profile mapping config mapping mode.
Options:
1. vlan(1) - The XPON line profile mapping mode is vlan
2. pri8021p(2) - The XPON line profile mapping mode is 802.1p
3. vlanpri(3) - The XPON line profile mapping mode is vlan and 802.1p
4. port(4) - The XPON line profile mapping mode is port
5. vlanport(5) - The XPON line profile mapping mode is vlan and port
6. portpri(6) - The XPON line profile mapping mode is port and 802.1p
7. vlanpriport(7) - The XPON line profile mapping mode is vlan, port and 802.1p
8. e1t1port(8) - The XPON line profile mapping mode is the port of e1 and t1
9. iptos(9) - The XPON line profile mapping mode is iptos
10. vlaniptos(10) - The XPON line profile mapping mode is vlan and iptos
11. invalid(-1) - Indicates that the mapping port type is tdm-vclrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.4 |
hwGponDeviceLineProfMappingCfgCarTrafficTableIdThis object indicates the XPON line profile mapping config car profile index.rw Integer32 (-1 | 1..1024) .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.5 |
hwGponDeviceLineProfMappingCfgOntPhyTypeThis object indicates the port type of the ONT.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. vdsl(37) - VDSL
6. moca(46) - MOCA
7. eth(47) - ETH
8. iphost(50) - IPHOST
9. ippath(61) - Ippath
10. tdmvcl(253) - Tdmvcl
11. ethBundle(254) - EthBundle
12. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.6 |
hwGponDeviceLineProfMappingCfgOntPhyIndexThis object indicates the port index of the ONT,
or the bundle-groupid when it is the eth-bundle port type.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.7 |
hwGponDeviceLineProfMappingCfgVlanIdThis object indicates the VLAN ID of the service. The value -1 indicates invalid VLAN ID, and 65533 indicates untag traffic stream.rw Integer32 (-1|0..4095|65533) .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.8 |
hwGponDeviceLineProfMappingCfgVlanPriorityThis object indicates the priority of the service.rw Integer32 (-1|0..7) .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.9 |
hwGponDeviceLineProfMappingCfgRowStatusThe hwGponDeviceLineProfMappingCfgRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.10 |
hwGponDeviceLineProfMappingTransparentThis object indicates the flow transparent switch of the ONT.
Options:
1. enable(1) - Enable the flow transparent switch of the ONT
2. disable(2) - Disable the flow transparent switch of the ONT
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.11 |
hwGponDeviceLineProfMappingCfgCarTrafficTableNameThis object indicates the XPON line profile mapping config car profile name.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.64.1.12 |
hwGponDeviceSrvProfileInfoTableThis is the GPON service profile table.
The index of this table is hwGponDeviceSrvProfileInfoNameIndex. SEQUENCE OF HwGponDeviceSrvProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.65 |
hwGponDeviceSrvProfileInfoEntryThis is the GPON service profile table.
The index of this entry is hwGponDeviceSrvProfileInfoNameIndex. HwGponDeviceSrvProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.65.1 |
hwGponDeviceSrvProfileInfoNameIndexThis object indicates the GPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.65.1.1 |
hwGponDeviceSrvProfileBindNumThis object indicates the number of ONT bound with GPON service profile.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.65.1.2 |
hwGponDeviceSrvProfileCommitThis object indicates the GPON service profile configuration commit.
Options:
1. commitExecute(1) - Execute the GPON service profile configuration commit
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.65.1.3 |
hwGponDeviceSrvProfileRowStatusThe hwGponDeviceSrvProfileRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.65.1.4 |
hwGponDeviceSrvProfileOntCfgTableThis is GPON service profile ont config table.
The index of this table is hwGponDeviceSrvProfOntCfgSrvProfNameIndex. SEQUENCE OF HwGponDeviceSrvProfileOntCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.66 |
hwGponDeviceSrvProfileOntCfgEntryThis is GPON service profile ont config table.
The index of this entry is hwGponDeviceSrvProfOntCfgSrvProfNameIndex. HwGponDeviceSrvProfileOntCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.66.1 |
hwGponDeviceSrvProfOntCfgSrvProfNameIndexThis object indicates the XPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.1 |
hwGponDeviceSrvProfilePotsNumThis object indicates the XPON service profile pots port number.
A special value of 0xFE (254) indicates the number of port is adaptive.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.2 |
hwGponDeviceSrvProfileEthNumThis object indicates the XPON service profile eth port number.
A special value of 0xFE (254) indicates the number of port is adaptive.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.3 |
hwGponDeviceSrvProfileTdmPortNumThis object indicates the XPON service profile tdm port number.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.4 |
hwGponDeviceSrvProfileTdmPortTypeThis object indicates the XPON service profile tdm port type.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.5 |
hwGponDeviceSrvProfileTdmPortSrvTypeThis object indicates the XPON service profile tdm port service type.
Options:
1. tdmovergem(1) - Tdm over gem
2. cesop(2) - Cesoprw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.6 |
hwGponDeviceSrvProfileMocaNumThis object indicates the XPON service profile MOCA port number.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.7 |
hwGponDeviceSrvProfileCatvNumThis object indicates the XPON service profile catv port number.
A special value of 0xFE (254) indicates the number of port is adaptive.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.8 |
hwGponDeviceSrvProfileMacAddressSwitchThis object indicates the XPON service profile mac address switch.
Options:
1. enable(1) - Enable the XPON service profile mac address switch
2. disable(2) - Disable the XPON service profile mac address switch
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.9 |
hwGponDeviceSrvProfileTransparentSwitchThis object indicates the XPON service profile transparent switch.
Options:
1. enable(1) - Enable the XPON service profile transparent switch
2. disable(2) - Disable the XPON service profile transparent switch
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.10 |
hwGponDeviceSrvProfileMultiSrvTransmitModeThis object indicates the XPON service profile igmp transmit mode.
Options:
1. tagtranslation(1) - Indicates that the XPON service profile igmp transmit mode is tag translation
2. tagtransparent(2) - Indicates that the XPON service profile igmp transmit mode is tag transparent
3. untag(3) - Indicates that the XPON service profile igmp transmit mode is untag
4. unconcern(254) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.11 |
hwGponDeviceSrvProfileMulticastVlanThis object indicates the XPON service profile multicast vlan.
value 4096 indicates IGMP-user-VLAN is used for multicast vlan.rw Integer32 (-1 | 1..4095 | 4096) .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.12 |
hwGponDeviceSrvProfileMulticastModeThis object indicates the XPON service profile multicast mode.
Options:
1. oltcontrol(1) - Indicates that the XPON service profile multicast mode is olt controled
2. igmpsnooping(2) - Indicates that the XPON service profile multicast mode is igmp snooping
3. unconcern(254) - Indicates that the XPON service profile multicast mode is not concernedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.13 |
hwGponDeviceSrvProfileUpIgmpTransmitModeThis object indicates the XPON service profile upstream igmp packets forward mode.
Options:
1. transparent(1) - Indicates that the XPON service profile upstream igmp packets forward mode is transparent
2. translation(2) - Indicates that the XPON service profile upstream igmp packets forward mode is translation
3. default(3) - Indicates that the XPON service profile upstream igmp packets forward mode is default
4. unconcern(254) - Indicates that the XPON service profile upstream igmp packets forward mode is not concerned
5. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.14 |
hwGponDeviceSrvProfileUpIgmpMsgTranslationVlanXPON service profile upstream igmp packets will be translate to the translation vlan,
if upstream igmp packets forward mode is translation(2).rw Integer32 (-1|0..4095) .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.15 |
hwGponDeviceSrvProfileUpIgmpMsgPriorityWhen xpon service profile upstream igmp packets were added a vlan or
translated to the translation vlan, priority was set.rw Integer32 (-1|0..7) .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.16 |
hwGponDeviceSrvProfileNativeVlanOptionThis object indicates the XPON service profile native VLAN.
Options:
1. concern(1) - Concern the XPON service profile native VLAN
2. unconcern(2) - Unconcern the XPON service profile native VLANrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.17 |
hwGponDeviceSrvProfileUpPqColorPolicyThis object indicates the GPON service profile upstream priority-queue color policy.
Options:
1. noMarking(0) - Indicates that the upstream priority-queue color policy is no marking
2. dei(2) - Indicates that the upstream priority-queue color policy is DEI
3. invalid(-1) - Indicates that the upstream priority-queue color policy is invalidrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.18 |
hwGponDeviceSrvProfileDownPqColorPolicyThis object indicates the GPON service profile downstream priority-queue color policy.
Options:
1. noMarking(0) - Indicates that the downstream priority-queue color policy is no marking
2. dei(2) - Indicates that the downstream priority-queue color policy is DEI
3. invalid(-1) - Indicates that the downstream priority-queue color policy is invalidrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.19 |
hwGponDeviceSrvProfileVdslPortNumThis object indicates the XPON service profile VDSL port number.
A special value of 0xFE (254) indicates the number of port is adaptive.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.20 |
hwGponDeviceSrvProfileRingCheckSwitchThis object indicates the XPON service profile mac address switch.
Options:
1. enable(1) - Enable the XPON service profile ring check switch
2. disable(2) - Disable the XPON service profile ring check switch
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.21 |
hwGponDeviceSrvProfileRingCheckAutoShutdownSwitchThis object indicates the XPON service profile mac address switch.
Options:
1. enable(1) - Enable the XPON service profile ring check auto shutdown switch
2. disable(2) - Disable the XPON service profile ring check auto shutdown switch
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.22 |
hwGponDeviceSrvProfileRingCheckDetectingFrequencyThis object indicates the XPON service profile ring check detecting frequency.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.23 |
hwGponDeviceSrvProfileRingCheckResumeIntervalThis object indicates the XPON service profile ring check resume frequency.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.24 |
hwGponDeviceSrvProfileMaxNumOfAdapPotsPortThis object indicates the max number of adaptive pots ports.
Range: 1-32. 32 is default value.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.25 |
hwGponDeviceSrvProfileMaxNumOfAdapEthPortThis object indicates the max number of adaptive eth ports.
Range: 1-24. 8 is default value.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.26 |
hwGponDeviceSrvProfileMaxNumOfAdapVdslPortThis object indicates the max number of adaptive vdsl ports.
Range: 1-8. 8 is default value.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.27 |
hwGponDeviceSrvProfileMaxNumOfAdapCatvPortThis object indicates the max number of adaptive catv ports.
Range: 1-8. 8 is default value.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.28 |
hwGponDeviceSrvProfileWifiPortNumThis object indicates the XPON service profile WiFi port number.
Range: 0-4. 0 is default value.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.29 |
hwGponDeviceSrvProfileMonitorLinkSwitchThe switch of the ONT Monitor Link function.
Options:
1. enable(1) -Enable the the ONT Monitor Link function
2. disable(2) -Disable the the ONT Monitor Link function
3. unconcern (254) -The ONT Monitor Link function is unconcern and depends on ONT Configuration.The default value is unconcern.rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.30 |
hwGponDeviceSrvProfileMTUThis object indicates the ONT MTU value. Unit:byte.
The value (0) indicates that the MTU value is decided by ONT.
The value (-1) indicates that the query fails or no information is detected.
The default value is unconcern(0).rw Integer32 (-1|0|1519..9280) UNITS "byte" .1.3.6.1.4.1.2011.6.128.1.1.3.66.1.31 |
hwGponDeviceSrvProfOntPortCfgTableThis is the GPON service profile ont port config table.
The index of this table is a combination of hwGponDeviceSrvProfOntPortCfgSrvProfNameIndex,
hwGponDeviceSrvProfOntPortCfgOntPhyType and hwGponDeviceSrvProfOntPortCfgOntPhyIndex. SEQUENCE OF HwGponDeviceSrvProfOntPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.67 |
hwGponDeviceSrvProfOntPortCfgEntryThis is the GPON service profile ont port config table.
The index of this entry is a combination of hwGponDeviceSrvProfOntPortCfgSrvProfNameIndex,
hwGponDeviceSrvProfOntPortCfgOntPhyType and hwGponDeviceSrvProfOntPortCfgOntPhyIndex. HwGponDeviceSrvProfOntPortCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.67.1 |
hwGponDeviceSrvProfOntPortCfgSrvProfNameIndexXPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.1 |
hwGponDeviceSrvProfOntPortCfgOntPhyTypeThis object indicates the port type of the ONT.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. vdsl(37) - VDSL
6. moca(46) - MOCA
7. eth(47) - ETH
8. iphost(50) - IPHOST Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.2 |
hwGponDeviceSrvProfOntPortCfgOntPhyIndexThis object indicates the port index of the ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.3 |
hwGponDeviceSrvProfOntPortCfgTDMPortCodeModeThis object indicates the XPON service profile tdm port coding mode.
Options:
1. ami(1) - AMI
2. hdb3(2) - HDB3
3. b8zs(3) - B8ZS
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.4 |
hwGponDeviceSrvProfOntPortCfgPortQinQModeThis object indicates the QinQ mode.
Options:
1. disable(1) - Disable the QinQ mode
2. enable(2) - Enable the QinQ mode
3. unconcern(254) - The QinQ mode is not concerned
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.5 |
hwGponDeviceSrvProfOntPortCfgPortPriorityPolicyThis object indicates the priority policy.
Options:
1. assigned(1) - The priority policy is assigned
2. copycos(2) - The priority policy is copy CoS
3. unconcern(254) - The priority policy is not concerned
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.6 |
hwGponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableIdThe upstream car profile index of the ONT port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.7 |
hwGponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableIdThe downstream car profile index of the ONT port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.8 |
hwGponDeviceSrvProfOntPortCfgDscpProfIndexThe dscp profile index of the ONT port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.9 |
hwGponDeviceSrvProfOntPortCfgUpIgmpTransmitModeThis object indicates the upstream igmp packets transmit mode profile of GPON ONT port.
Options:
1. transparent(1) - Indicates that the GPON ONT port upstream igmp packets transmit mode profile is transparent
2. translation(2) - Indicates that the GPON ONT port upstream igmp packets transmit mode profile is translation
3. default(3) - Indicates that the GPON ONT port upstream igmp packets transmit mode profile is default
4. disable(254) - Indicates that the GPON ONT port upstream igmp packets transmit mode profile configured will be cancelled
5. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.10 |
hwGponDeviceSrvProfOntPortCfgUpIgmpMsgTranslationVlanThe GPON ONT port upstream igmp packets will be translate to the translation vlan,
if GPON ONT port upstream igmp packets forward mode is translation(2) or default(3).rw Integer32 (-1|0..4095) .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.11 |
hwGponDeviceSrvProfOntPortCfgUpIgmpMsgPriorityWhen GPON ONT port upstream igmp packets were added a vlan or
translated to the translation vlan, priority was set.rw Integer32 (-1|0..7) .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.12 |
hwGponDeviceSrvProfOntPortCfgMaxMacAddressNumThis object indicates the maximum number of MAC addresses that can be learned on each ONT port.
The number of MAC addresses learned on an ONT port should not greater than this number.
range:0~255. 4294967295 is invalid value. 0 is default value, means unlimited.rw Gauge32 (0..255 | 4294967295) .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.13 |
hwGponDeviceSrvProfOntPortCfgTDMPortTxClockModeThis object indicates the tx-clock mode of ONT TDM port.
Options:
1. adapt(1) - Indicates that the tx-clock mode of the ONT TDM port is adapt
2. system(2) - Indicates that the tx-clock mode of the ONT TDM port is system
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.14 |
hwGponDeviceSrvProfOntPortCfgDownstreamModeThis object indicates the downstream mode of GPON ONT port.
Options:
1. noOperation(1) - Indicates not to process the VLAN tag of the downstram packets
2. operationAndDiscardMismatch(2) - Indicates to process the VLAN tag of the downstream packets and discard the packets with mismatched VLAN tag
3. operationAndForwardMismatch(3) - Indicates to process the VLAN tag of the downstream packets and forward the packets with mismatched VLAN tag
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.15 |
hwGponDeviceSrvProfOntPortCfgUpStreamCarTrafficTableNameThe upstream car profile name of the ONT port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.16 |
hwGponDeviceSrvProfOntPortCfgDownStreamCarTrafficTableNameThe downstream car profile name of the ONT port.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.17 |
hwGponDeviceSrvProfOntPortCfgClassProfileIndexIndicates the index of the traffic classification profile configured on the ONT port.
The valid value range is 1~256.
The value (65534) indicates that the traffic classification profile is not bound to the port.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.18 |
hwGponDeviceSrvProfOntPortCfgUnknownUnicastRateThis object indicates the unknown unicast traffic suppression on the ONT port.
The value (0~10000000) indicates the unknown unicast traffic maximum rate on the ONT port.
The value (-3) indicates that the unknown unicast traffic rate on the ONT port is unlimited.
The value (-2) indicates that the unknown unicast traffic suppression on the ONT port is not configured.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.19 |
hwGponDeviceSrvProfOntPortCfgBroadcastRateThis object indicates the broadcast traffic suppression on the ONT port.
The value (0~10000000) indicates the broadcast traffic maximum rate on the ONT port.
The value (-3) indicates that the broadcast traffic rate on the ONT port is unlimited.
The value (-2) indicates that the broadcast traffic suppression on the ONT port is not configured.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.20 |
hwGponDeviceSrvProfOntPortCfgUnknownMulticastRateThis object indicates the unknown multicast traffic suppression on the ONT port.
The value (0~10000000) indicates the multicast unicast traffic maximum rate on the ONT port.
The value (-3) indicates that the multicast unicast traffic rate on the ONT port is unlimited.
The value (-2) indicates that the multicast unicast traffic suppression on the ONT port is not configured.
The value (-1) indicates that the query fails or no information is detected.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.21 |
hwGponDeviceSrvProfOntPortCfgL2IsolateSwitchThis object is used to configure Layer 2 isolation for a GPON ONT port.
The default value is unconcern(254).
Options:
1. enable(1) - Indicates that the switch is enabled
2. disable(2) - Indicates that the switch is disabled
3. unconcern(254) - Indicates that the switch is unconcern
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.67.1.22 |
hwGponDeviceSrvProfPortVlanCfgTableThis is the GPON service profile port vlan config table.
The index of this table is a combination of hwGponDeviceSrvProfPortVlanCfgSrvProfNameIndex,
hwGponDeviceSrvProfPortVlanCfgOntPhyType, hwGponDeviceSrvProfPortVlanCfgOntPhyIndex,
hwGponDeviceSrvProfPortVlanCfgPortCVlan, hwGponDeviceSrvProfPortVlanCfgPortVlanCPri
and hwGponDeviceSrvProfPortVlanCfgEtherType. SEQUENCE OF HwGponDeviceSrvProfPortVlanCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.68 |
hwGponDeviceSrvProfPortVlanCfgEntryThis is the GPON service profile port vlan config table.
The index of this entry is a combination of hwGponDeviceSrvProfPortVlanCfgSrvProfNameIndex,
hwGponDeviceSrvProfPortVlanCfgOntPhyType, hwGponDeviceSrvProfPortVlanCfgOntPhyIndex,
hwGponDeviceSrvProfPortVlanCfgPortCVlan, hwGponDeviceSrvProfPortVlanCfgPortVlanCPri
and hwGponDeviceSrvProfPortVlanCfgEtherType. HwGponDeviceSrvProfPortVlanCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.68.1 |
hwGponDeviceSrvProfPortVlanCfgSrvProfNameIndexThis object indicates the XPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.1 |
hwGponDeviceSrvProfPortVlanCfgOntPhyTypeThis object indicates the port type of the ONT.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. vdsl(37) - VDSL
6. wifi(40) - WiFi
7. moca(46) - MOCA
8. eth(47) - ETH
9. iphost(50) - IPHOST Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.2 |
hwGponDeviceSrvProfPortVlanCfgOntPhyIndexThis object indicates the port index of the ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.3 |
hwGponDeviceSrvProfPortVlanCfgPortCVlanThis object indicates the user-side VLAN of port on the GPON service profile.
Options:
1.user-vlan(0~4095) - Indicates the VLAN for user-side packets of an ONT port
2.transparent(65534) - Indicates the transparent transmission mode for packet forwarding. In this mode, packets are not processed and VLAN tags remain the same
3.untagged(65533) - Indicates that user-side packets before VLAN translation do not carry VLAN tags
4.other-all(65532) - Indicates that user-side packets before VLAN translation are ones that cannot be matched by specified VLAN or untagged VLAN
5.invalid(-1) - Indicates that there is no VLAN translation, or this port is not in VLAN translation mode, for example, user-side packets is in priority translation mode, not concerned VLAN ID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.4 |
hwGponDeviceSrvProfPortVlanCfgRowStatusThe hwGponDeviceSrvProfPortVlanCfgRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.5 |
hwGponDeviceSrvProfPortVlanCfgPortVlanTypeThis object indicates the XPON service profile port vlan type.
Options:
1. transparent(1) - Indicates that the XPON service profile port vlan type is transparent
2. translation(2) - Indicates that the XPON service profile port vlan type is translation
3. qinq(3) - Indicates that the XPON service profile port vlan type is qinq
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.6 |
hwGponDeviceSrvProfPortVlanCfgPortVlanSPriThis object indicates the GPON service profile port translation or qinq s-priorityrw Integer32 (-1|0..7) .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.7 |
hwGponDeviceSrvProfPortVlanCfgPortSVlanThis object indicates the GPON service profile port service vlan.rw Integer32 (-1 | 0..4095) .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.8 |
hwGponDeviceSrvProfPortVlanCfgPortVlanCPriThis object indicates the GPON service profile port translation or qinq c-priority. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.9 |
hwGponDeviceSrvProfPortVlanCfgEtherTypeThis object indicates the XPON service profile customer service encapsulation type.
Options:
1. ipv4-ipoe(1) - Indicates that the XPON service profile customer service encapsulation type is ipv4 ipoe
2. pppoe(2) - Indicates that the XPON service profile customer service encapsulation type is pppoe
3. ipv6-ipoe(4) - Indicates that the XPON service profile customer service encapsulation type is ipv6 ipoe
4. invalid(-1) - Indicates that the query fails or no information is detected
5. 0x600-0xffff - Indicates that the XPON service profile customer service encapsulation type is user-definedrw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.10 |
hwGponDeviceSrvProfPortVlanCfgPortVlanSPriPolicyThis object indicates the s-vlan priority policy.
Options:
1. specify(1) - Indicates that the s-vlan priority policy is specified
2. userCos(2) - Indicates that the s-vlan priority policy is userCos
3. dscpMapping(3) - Indicates that the s-vlan priority policy is dscpMapping
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.11 |
hwGponDeviceSrvProfPortVlanCfgDscpDefaultPriorityThis object indicates the default priority for dscpMapping policy.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.12 |
hwGponDeviceSrvProfPortVlanCfgPortVlanTlsSwitchThe switch used to config the attribute of vlan translation.
Options:
1. off(1) - Indicates that the attribute of vlan translation is off
2. on(2) - Indicates that the attribute of vlan translation is on
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.68.1.13 |
hwGponDeviceAlarmProfileInfoTableThis is the GPON alarm profile table.
The index of this table is hwGponDeviceAlarmProfileInfoNameIndex. SEQUENCE OF HwGponDeviceAlarmProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.69 |
hwGponDeviceAlarmProfileInfoEntryThis is the GPON alarm profile table.
The index of this entry is hwGponDeviceAlarmProfileInfoNameIndex. HwGponDeviceAlarmProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.69.1 |
hwGponDeviceAlarmProfileInfoNameIndexThis object indicates the alarm profile name. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.1 |
hwGponDeviceAlarmProfileBindNumThis object indicates the binding times of the profile.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.2 |
hwGponDeviceAlarmProfileLostPacketsThresholdThis object indicates the loss of frames threshold of GEM port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.3 |
hwGponDeviceAlarmProfileMisinsertedPacketsThresholdThis object indicates the mis-inserted frames threshold of GEM port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.4 |
hwGponDeviceAlarmProfileImpairedBlocksThresholdThis object indicates the impaired blocks alarm threshold of GEM port.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.5 |
hwGponDeviceAlarmProfileFCSErrorsThresholdThis object indicates the Ethernet FCS errors alarm threshold.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.6 |
hwGponDeviceAlarmProfileExcessiveCollisionCounterThresholdThis object indicates the ethernet excessive collision count alarm threshold.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.7 |
hwGponDeviceAlarmProfileLateCollisionCounterThresholdThis object indicates the ethernet late collision count alarm threshold within 512 bit-times.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.8 |
hwGponDeviceAlarmProfileFrameTooLongsThresholdThis object indicates the too long Ethernet frames alarm threshold.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.9 |
hwGponDeviceAlarmProfileBufferOverflowsonReceiveThresholdThis object indicates the Ethernet buffer received overflows alarm threshold.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.10 |
hwGponDeviceAlarmProfileBufferOverflowsonTransmitThresholdThis object indicates the alarm threshold of transmit buffer overflows.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.11 |
hwGponDeviceAlarmProfileSingleCollisionFrameCounterThresholdThis object indicates alarm threshold of the Ethernet single collision frame count.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.12 |
hwGponDeviceAlarmProfileMultipleCollisionsFrameCounterThresholdThis object indicates the alarm threshold of Ethernet multiple collisions frame count.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.13 |
hwGponDeviceAlarmProfileSQECounterThresholdThis object indicates the alarm threshold of Ethernet SQE test error messages count.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.14 |
hwGponDeviceAlarmProfileDeferredTransmissionCounterThresholdThis object indicates the alarm threshold of the deferred frames count.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.15 |
hwGponDeviceAlarmProfileInternalmactransmiterrorcounterThresholdThis object indicates the alarm threshold of transmit errors at the MAC sub-layer.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.16 |
hwGponDeviceAlarmProfileCarrierSenseErrorCounterThresholdThis object indicates the alarm threshold of carrier sense errors.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.17 |
hwGponDeviceAlarmProfileAlignmentErrorCounterThresholdThis object indicates the alarm threshold of frame alignment errors.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.18 |
hwGponDeviceAlarmProfileInternalMACReceiveErrorCounterThresholdThis object indicates the alarm threshold of receive errors at the MAC sub-layer.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.19 |
hwGponDeviceAlarmProfilePPPoEFilteredFrameCounterThresholdThis object indicates the alarm threshold of filtered PPPoE frames.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.20 |
hwGponDeviceAlarmProfileDelayExceededDiscardThresholdThis object indicates the alarm threshold of frames discarded due to timeout.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.21 |
hwGponDeviceAlarmProfileMTUExceededDiscardThresholdThis object indicates the alarm threshold of frames dropped due to excessive MTU.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.22 |
hwGponDeviceAlarmProfileReceivedAndDiscardedThresholdThis object indicates the alarm threshold of received error frames.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.23 |
hwGponDeviceAlarmProfileCESErrorSecondsThresholdThis object indicates the alarm threshold of CES errored seconds.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.26 |
hwGponDeviceAlarmProfileCESSeverelyErrorSecondsThresholdThis object indicates the alarm threshold of CES severely errored seconds.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.27 |
hwGponDeviceAlarmProfileCESBurstyErrorSecondsThresholdThis object indicates the alarm threshold of CES bursty errored seconds.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.28 |
hwGponDeviceAlarmProfileCESUnavailableSecondsThresholdThis object indicates the alarm threshold of CES unavailable seconds.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.29 |
hwGponDeviceAlarmProfileCESControlledSlipSecondsThresholdThis object indicates the alarm threshold of CES controlled slip seconds.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.30 |
hwGponDeviceAlarmProfileDropEventsThresholdThis object indicates the alarm threshold of discarded packets.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.31 |
hwGponDeviceAlarmProfileUndersizepacketsThresholdThis object indicates the alarm threshold of undersized packets.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.32 |
hwGponDeviceAlarmProfileFragmentsThresholdThis object indicates the alarm threshold of fragments.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.33 |
hwGponDeviceAlarmProfileJabbersThresholdThis object indicates the alarm threshold of jabbers.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.34 |
hwGponDeviceAlarmProfileFailedSignalOfOnuThresholdThis object indicates the threshold of ONT signal failures(Format:1e-x).,range:3~8
for example: if the value of the leaf is 3,the actual value is 0.001,
if the value of the leaf is 8,the actual value is 0.00000001rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.35 |
hwGponDeviceAlarmProfileDegradedSignalOfOnuThresholdThis object indicates the threshold of ONT degraded signals(Format:1e-x),range:4~9
for example: if the value of the leaf is 4,the actual value is 0.0001,
if the value of the leaf is 9,the actual value is 0.000000001.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.36 |
hwGponDeviceAlarmProfileFECUncorrectCodeWordsThresholdThis object indicates the threshold of the code words that were not corrected by
the FEC function, range:0~1101600000. 4294967295 is invalid value.rw Gauge32 (0..1101600000 | 4294967295) .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.37 |
hwGponDeviceAlarmProfileFECCorrectCodeWordsThresholdThis object indicates the threshold of the code words that were corrected by the
FEC function, range:0~1101600000. 4294967295 is invalid value.rw Gauge32 (0..1101600000 | 4294967295) .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.38 |
hwGponDeviceAlarmProfileUpstreamPQDiscardedBytesThresholdUpstream PQ discarded byte alarm threshold, range:0~65535. If this parameter is set to an invalid value 0, the PQ alarm statistics function is disabled.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.39 |
hwGponDeviceAlarmProfileDownstreamPQDiscardedBytesThresholdDownstream PQ discarded byte alarm threshold, range:0~65535. If this parameter is set to an invalid value 0, the PQ alarm statistics function is disabled.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.40 |
hwGponDeviceAlarmProfileRowStatusThe hwGponDeviceAlarmProfileRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.50 |
hwGponDeviceAlarmProfileEncryptionKeyErrorsOfOnuThresholdEncryption key errors Of Onu Threshold, range:0~100.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.51 |
hwGponDeviceAlarmProfileXgemKeyErrorsOfOnuThresholdXGEM key errors Of Onu Threshold, range:0~100.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.52 |
hwGponDeviceAlarmProfileXgemHecErrorCountOfOnuThresholdXGEM HEC error count Of Onu Threshold,range:0~100.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.69.1.53 |
hwXponDeviceOpticsDdmAlarmProfileInfoTableThis is the XPON optical alarm profile infomation table.
The index of this table is hwXponDeviceOpticsModuleAlarmProfileInfoNameIndex. SEQUENCE OF HwXponDeviceOpticsDdmAlarmProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.70 |
hwXponDeviceOpticsDdmAlarmProfileInfoEntryThis is the XPON optical alarm profile infomation table.
The index of this entry is hwXponDeviceOpticsModuleAlarmProfileInfoNameIndex. HwXponDeviceOpticsDdmAlarmProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.70.1 |
hwXponDeviceOpticsModuleAlarmProfileInfoNameIndexThis object indicates the XPON optical alarm profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.1 |
hwXponDeviceOpticsDdmAlarmProfileBindNumThis object indicates the XPON optical alarm profile binding times.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.2 |
hwXponDeviceOpticsDdmAlarmProfileInfoRowStatusThe hwXponDeviceOpticsDdmAlarmProfileInfoRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.3 |
hwXponDeviceOpticsDdmAlarmProfileTxOpticAlarmUpperThis object indicates the upper alarm threshold of the transmit optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.4 |
hwXponDeviceOpticsDdmAlarmProfileTxOpticAlarmLowerThis object indicates the lower alarm threshold of the transmit optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.5 |
hwXponDeviceOpticsDdmAlarmProfileTxOpticWarnUpperThis object indicates the upper warning threshold of the transmit optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.6 |
hwXponDeviceOpticsDdmAlarmProfileTxOpticWarnLowerThis object indicates the lower warning threshold of the transmit optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.7 |
hwXponDeviceOpticsDdmAlarmProfileRxOpticAlarmUpperThis object indicates the upper alarm threshold of the receive optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.8 |
hwXponDeviceOpticsDdmAlarmProfileRxOpticAlarmLowerThis object indicates the lower alarm threshold of the receive optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.9 |
hwXponDeviceOpticsDdmAlarmProfileRxOpticWarnUpperThis object indicates the upper warning threshold of the receive optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.10 |
hwXponDeviceOpticsDdmAlarmProfileRxOpticWarnLowerThis object indicates the lower warning threshold of the receive optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.11 |
hwXponDeviceOpticsDdmAlarmProfileBiasCurrentAlarmUpperThis object indicates the upper alarm threshold of the bias current.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.12 |
hwXponDeviceOpticsDdmAlarmProfileBiasCurrentAlarmLowerThis object indicates the lower alarm threshold of the bias current.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.13 |
hwXponDeviceOpticsDdmAlarmProfileBiasCurrentWarnUpperThis object indicates the upper warning threshold of the bias current.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.14 |
hwXponDeviceOpticsDdmAlarmProfileBiasCurrentWarnLowerThis object indicates the lower warning threshold of the bias current.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.15 |
hwXponDeviceOpticsDdmAlarmProfileSupplyVoltageAlarmUpperThis object indicates the upper alarm threshold of the voltage.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.16 |
hwXponDeviceOpticsDdmAlarmProfileSupplyVoltageAlarmLowerThis object indicates the lower alarm threshold of the voltage.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.17 |
hwXponDeviceOpticsDdmAlarmProfileSupplyVoltageWarnUpperThis object indicates the upper warning threshold of the voltage.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.18 |
hwXponDeviceOpticsDdmAlarmProfileSupplyVoltageWarnLowerThis object indicates the lower warning threshold of the voltage.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.19 |
hwXponDeviceOpticsDdmAlarmProfileTemperatureAlarmUpperThis object indicates the upper alarm threshold of the temperature of the optical transceiver.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.20 |
hwXponDeviceOpticsDdmAlarmProfileTemperatureAlarmLowerThis object indicates the lower alarm threshold of the temperature of the optical transceiver.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.21 |
hwXponDeviceOpticsDdmAlarmProfileTemperatureWarnUpperThis object indicates the upper warning threshold of the temperature of the optical transceiver.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.22 |
hwXponDeviceOpticsDdmAlarmProfileTemperatureWarnLowerThis object indicates the lower warning threshold of the temperature of the optical transceiver.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.23 |
hwXponDeviceOpticsDdmAlarmProfile10GTxOpticAlarmUpperThis object indicates the upper alarm threshold of the 10G transmit optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.24 |
hwXponDeviceOpticsDdmAlarmProfile10GTxOpticAlarmLowerThis object indicates the lower alarm threshold of the 10G transmit optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.25 |
hwXponDeviceOpticsDdmAlarmProfile10GTxOpticWarnUpperThis object indicates the upper warning threshold of the 10G transmit optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.26 |
hwXponDeviceOpticsDdmAlarmProfile10GTxOpticWarnLowerThis object indicates the lower warning threshold of the 10G transmit optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.27 |
hwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentAlarmUpperThis object indicates the upper alarm threshold of the 10G bias current.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.28 |
hwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentAlarmLowerThis object indicates the lower alarm threshold of the 10G bias current.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.29 |
hwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentWarnUpperThis object indicates the upper warning threshold of the 10G bias current.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.30 |
hwXponDeviceOpticsDdmAlarmProfile10GBiasCurrentWarnLowerThis object indicates the lower warning threshold of the 10G bias current.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.31 |
hwXponDeviceOpticsDdmAlarmProfileOntCatvRxOpticAlarmUpperThis object indicates the upper alarm threshold of the ONT CATV receive optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.32 |
hwXponDeviceOpticsDdmAlarmProfileOntCatvRxOpticAlarmLowerThis object indicates the lower alarm threshold of the ONT CATV receive optical power.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.70.1.33 |
hwXponDeviceLineProfEthPortBundleCfgTableThis is the XPON line profile PORT-BUNDLE config table.
The index of this table is a combination of hwXponDeviceLineProfEthPortBundleCfgLineProfNameIndex,
and hwXponDeviceLineProfEthPortBundleCfgGroupIndex. SEQUENCE OF HwXponDeviceLineProfEthPortBundleCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.71 |
hwXponDeviceLineProfEthPortBundleCfgEntryThis is the XPON line profile PORT-BUNDLE config table.
The index of this entry is a combination of hwXponDeviceLineProfEthPortBundleCfgLineProfNameIndex,
and hwXponDeviceLineProfEthPortBundleCfgGroupIndex. HwXponDeviceLineProfEthPortBundleCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.71.1 |
hwXponDeviceLineProfEthPortBundleCfgLineProfNameIndexThis object indicates the XPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.71.1.1 |
hwXponDeviceLineProfEthPortBundleCfgGroupIndexThis object indicates the XPON line profile PORT-BUNDLE config bundle gproup index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.71.1.2 |
hwXponDeviceLineProfEthPortBundleCfgPortBitMapThis object indicates the XPON line profile PORT-BUNDLE config bundle port bitmap,
support 32 ports, and the lowest bit indicates the port 1.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.71.1.3 |
hwXponDeviceLineProfEthPortBundleCfgRowStatusThe hwXponDeviceLineProfEthPortBundleCfgRowStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.71.1.4 |
hwXponDeviceSLAProfileInfoTableThis is the XPON SLA profile infomation table.
The index of this table is hwXponDeviceSLAProfileInfoNameIndex. SEQUENCE OF HwXponDeviceSLAProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.72 |
hwXponDeviceSLAProfileInfoEntryThis is the XPON SLA profile infomation table.
The index of this entry is hwXponDeviceSLAProfileInfoNameIndex. HwXponDeviceSLAProfileInfoEntry .1.3.6.1.4.1.2011.6.128.1.1.3.72.1 |
hwXponDeviceSLAProfileInfoNameIndexThis object indicates the name of the SLA profile. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.1 |
hwXponDeviceSLAProfileCycleLengthThis object indicates the cycle length.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.2 |
hwXponDeviceSLAProfileServiceNumThis object indicates the service number.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.3 |
hwXponDeviceSLAProfileFixedPacketSize1This object indicates the fixed packet size of service 1.
The value(0) indicates that there is no restriction of packet size.
The value(-1) is invalid value.rw Integer32 (-1 | 0 | 64..2000) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.4 |
hwXponDeviceSLAProfileFixedBandwidth1This object indicates the fixed bandwidth of service 1.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.5 |
hwXponDeviceSLAProfileAssuredBandwidth1This object indicates the assure bandwidth of service 1.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.6 |
hwXponDeviceSLAProfileBestEffortBandwidth1This object indicates the best effort bandwidth of service 1.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.7 |
hwXponDeviceSLAProfileWrrWeight1This object indicates the WRR weight of Service 1.
The value(-1) is invalid value.rw Integer32 (-1 | 0..100) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.8 |
hwXponDeviceSLAProfileFixedPacketSize2This object indicates the fixed packet size of service 2.
The value(0) indicates that there is no restriction of packet size.
The value(-1) is invalid value.rw Integer32 (-1 | 0 | 64..2000) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.9 |
hwXponDeviceSLAProfileFixedBandwidth2This object indicates the fixed bandwidth of service 2.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.10 |
hwXponDeviceSLAProfileAssuredBandwidth2This object indicates the assure bandwidth of service 2.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.11 |
hwXponDeviceSLAProfileBestEffortBandwidth2This object indicates the best effort bandwidth of service 2.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.12 |
hwXponDeviceSLAProfileWrrWeight2This object indicates the WRR weight of service 2.
The value(-1) is invalid value.rw Integer32 (-1 | 0..100) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.13 |
hwXponDeviceSLAProfileFixedPacketSize3This object indicates the fixed packet size of service 3.
The value(0) indicates that there is no restriction of packet size.
The value(-1) is invalid value.rw Integer32 (-1 | 0 | 64..2000) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.14 |
hwXponDeviceSLAProfileFixedBandwidth3This object indicates the fixed bandwidth of service 3.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.15 |
hwXponDeviceSLAProfileAssuredBandwidth3This object indicates the assure bandwidth of service 3.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.16 |
hwXponDeviceSLAProfileBestEffortBandwidth3This object indicates the best effort bandwidth of Service 3.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.17 |
hwXponDeviceSLAProfileWrrWeight3This object indicates the WRR weight of service 3.
The value(-1) is invalid value.rw Integer32 (-1 | 0..100) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.18 |
hwXponDeviceSLAProfileFixedPacketSize4This object indicates the fixed packet size of service 4.
The value(0) indicates that there is no restriction of packet size.
The value(-1) is invalid value.rw Integer32 (-1 | 0 | 64..2000) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.19 |
hwXponDeviceSLAProfileFixedBandwidth4This object indicates the fixed bandwidth of service 4.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.20 |
hwXponDeviceSLAProfileAssuredBandwidth4This object indicates the assure bandwidth of service 4.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.21 |
hwXponDeviceSLAProfileBestEffortBandwidth4This object indicates the best effort bandwidth of service 4.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.22 |
hwXponDeviceSLAProfileWrrWeight4This object indicates the WRR weight of service 4.
The value(-1) is invalid value.rw Integer32 (-1 | 0..100) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.23 |
hwXponDeviceSLAProfileFixedPacketSize5This object indicates the fixed packet size of service 5.
The value(0) indicates that there is no restriction of packet size.
The value(-1) is invalid value.rw Integer32 (-1 | 0 | 64..2000) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.24 |
hwXponDeviceSLAProfileFixedBandwidth5This object indicates the Fixed Bandwidth of service 5.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.25 |
hwXponDeviceSLAProfileAssuredBandwidth5This object indicates the assure bandwidth of service 5.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.26 |
hwXponDeviceSLAProfileBestEffortBandwidth5This object indicates the best effort bandwidth of service 5.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.27 |
hwXponDeviceSLAProfileWrrWeight5This object indicates the WRR weight of service 5.
The value(-1) is invalid value.rw Integer32 (-1 | 0..100) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.28 |
hwXponDeviceSLAProfileFixedPacketSize6This object indicates the fixed packet size of service 6.
The value(0) indicates that there is no restriction of packet size.
The value(-1) is invalid value.rw Integer32 (-1 | 0 | 64..2000) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.29 |
hwXponDeviceSLAProfileFixedBandwidth6This object indicates the fixed bandwidth of service 6.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.30 |
hwXponDeviceSLAProfileAssuredBandwidth6This object indicates the assure bandwidth of service 6.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.31 |
hwXponDeviceSLAProfileBestEffortBandwidth6This object indicates the best effort bandwidth of service 6.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.32 |
hwXponDeviceSLAProfileWrrWeight6This object indicates the WRR weight of service 6.
The value(-1) is invalid value.rw Integer32 (-1 | 0..100) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.33 |
hwXponDeviceSLAProfileFixedPacketSize7This object indicates the fixed packet size of service 7.
The value(0) indicates that there is no restriction of packet size.
The value(-1) is invalid value.rw Integer32 (-1 | 0 | 64..2000) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.34 |
hwXponDeviceSLAProfileFixedBandwidth7This object indicates the fixed bandwidth of service 7.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.35 |
hwXponDeviceSLAProfileAssuredBandwidth7This object indicates the assure bandwidth of service 7.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.36 |
hwXponDeviceSLAProfileBestEffortBandwidth7This object indicates the best effort bandwidth of service 7.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.37 |
hwXponDeviceSLAProfileWrrWeight7This object indicates the WRR weight of service 7.
The value(-1) is invalid value.rw Integer32 (-1 | 0..100) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.38 |
hwXponDeviceSLAProfileFixedPacketSize8This object indicates the fixed packet size of service 8.
The value(0) indicates that there is no restriction of packet size.
The value(-1) is invalid value.rw Integer32 (-1 | 0 | 64..2000) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.39 |
hwXponDeviceSLAProfileFixedBandwidth8This object indicates the fixed bandwidth of service 8.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.40 |
hwXponDeviceSLAProfileAssuredBandwidth8This object indicates the assure bandwidth of service 8.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.41 |
hwXponDeviceSLAProfileBestEffortBandwidth8This object indicates the best effort bandwidth of service 8.
The value(-1) is invalid value.rw Integer32 (-1 | 0..999936) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.42 |
hwXponDeviceSLAProfileWrrWeight8This object indicates the WRR weight of service 8.
The value(-1) is invalid value.rw Integer32 (-1 | 0..100) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.43 |
hwXponDeviceSLAProfileEntryStatusThe hwXponDeviceSLAProfileEntryStatus is used to create a new row
or to modify or delete an existing row in this table.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.72.1.44 |
hwGponDeviceSrvProfileOntUpIgmpMsgCfgTableThis table is used to set and query the user-VLAN-based IGMP packet forwarding mode of ONT.
The indexes of this table are hwGponDeviceSrvProfileOntIgmpCfgNameIndex and hwGponDeviceSrvProfileOntUpIgmpMsgUserVlan. SEQUENCE OF HwGponDeviceSrvProfileOntUpIgmpMsgCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.73 |
hwGponDeviceSrvProfileOntUpIgmpMsgCfgEntryThis table is used to set and query the user-VLAN-based IGMP packet forwarding mode of ONT.
The indexes of this entry are hwGponDeviceSrvProfileOntIgmpCfgNameIndex and hwGponDeviceSrvProfileOntUpIgmpMsgUserVlan. HwGponDeviceSrvProfileOntUpIgmpMsgCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.73.1 |
hwGponDeviceSrvProfileOntIgmpCfgNameIndexThis object indicates the XPON service profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.73.1.1 |
hwGponDeviceSrvProfileOntUpIgmpMsgUserVlanThis object indicates the user VLAN of upstream IGMP packets.
0..4095 indicates the user VLAN. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.73.1.2 |
hwGponDeviceSrvProfileOntUpIgmpTransmitModeThis object indicates the IGMP packet forwarding mode.
Only the value transparent(1) is supported currently.
Options:
1. transparent(1) - Indicates that the IGMP upstream packets forward mode is transparent
2. translation(2) - Indicates that the IGMP upstream packets forward mode is translation
3. default(3) - Indicates that the IGMP upstream packets forward mode is add VLAN tag
4. invalid(-1) - Indicates that the query fails or no information is detected.rw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.73.1.3 |
hwGponDeviceSrvProfileOntUpIgmpMsgTranslationVlanThis object indicates the ont upstream IGMP packets will be translate to the translation vlan.rw Integer32 (-1|0..4095) .1.3.6.1.4.1.2011.6.128.1.1.3.73.1.4 |
hwGponDeviceSrvProfileOntUpIgmpMsgPriorityWhen upstream IGMP packets were added a vlan or translated to the translation vlan, priority was set.rw Integer32 (-1|0..7) .1.3.6.1.4.1.2011.6.128.1.1.3.73.1.5 |
hwGponDeviceSrvProfileOntUpIgmpMsgCfgRowStatusRow status. This object is used to differentiate the
creation, modification and deletion operations for an object.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.128.1.1.3.73.1.6 |
hwGponDeviceLineProfGemBundleCfgTableThis is the XPON line profile GEM port bundle configure table.
The indexes of this table are hwGponDeviceLineProfGemBundleLineProfNameIndex
and hwGponDeviceLineProfGemBundleCfgMaster. SEQUENCE OF HwGponDeviceLineProfGemBundleCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.74 |
hwGponDeviceLineProfGemBundleCfgEntryThis is the XPON line profile GEM port bundle config table.
The indexes of this entry are hwGponDeviceLineProfGemBundleLineProfNameIndex
and hwGponDeviceLineProfGemBundleCfgMaster. HwGponDeviceLineProfGemBundleCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.74.1 |
hwGponDeviceLineProfGemBundleLineProfNameIndexThis object indicates the XPON line profile name index. OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.74.1.1 |
hwGponDeviceLineProfGemBundleCfgMasterIndicates the master GEM index of bundle. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.74.1.2 |
hwGponDeviceLineProfGemBundleCfgSlaveListIndicates the slave GEM ports of bundle.
The value of slave GEM ports of bundle:
number(1byte) :Indicates the number of slave GEM ports . The maximum number is 7.
gemportid(2byte * number) :Indicates a slave GEM port ID.rw OCTET STRING .1.3.6.1.4.1.2011.6.128.1.1.3.74.1.3 |
hwGponDeviceLineProfMulticastGemCfgTableThis is the XPON line profile multicast gemport config table.
The index of this table is hwGponDeviceLineProfileInfoNameIndex. SEQUENCE OF HwGponDeviceLineProfMulticastGemCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.148 |
hwGponDeviceLineProfMulticastGemCfgEntryThis is the XPON line profile multicast gemport config table.
The index of this entry is hwGponDeviceLineProfileInfoNameIndex. HwGponDeviceLineProfMulticastGemCfgEntry .1.3.6.1.4.1.2011.6.128.1.1.3.148.1 |
hwGponDeviceLineProfMulticastGemCfgTcontIndexThis object indicates the XPON line profile T-CONT index.
The issued value (-1) of T-CONT index indicates that the multicast gemport is not specified to any tcont.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.148.1.1 |
hwGponDeviceLineProfMulticastGemCfgOntPhyTypeThis object indicates the port type of the ONT.
Options:
1. eth(47) - ETH
2. ethBundle(254) - EthBundle
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.3.148.1.2 |
hwGponDeviceLineProfMulticastGemCfgOntPhyIndexThis object indicates the port index of the ONT,
or the bundle-groupid when it is the eth-bundle port type.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.3.148.1.3 |
hwXponDeviceStatisticObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1.1.4 |
hwGponOltEthernetStatisticTableThe GPON port ether statistics table. The index of this table is ifIndex. SEQUENCE OF HwGponOltEthernetStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.21 |
hwGponOltEthernetStatisticEntryThe GPON port ether statistics table. The index of this entry is ifIndex. HwGponOltEthernetStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.21.1 |
hwGponOltEthernetStatisticReceivedPaktsThis object indicates the received frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.1 |
hwGponOltEthernetStatisticSendPaktsThis object indicates the sent frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.2 |
hwGponOltEthernetStatisticDropPaktsThis object indicates the number of Ethernet frames, including oversized frames,
undersized frames, and CRC failures.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.3 |
hwGponOltEthernetStatisticReceivedTotalPaktsThis object indicates the received GEM frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.4 |
hwGponOltEthernetStatisticReceivedBroadcastPaktsThis object indicates the received broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.5 |
hwGponOltEthernetStatisticReceivedMulticastPaktsThis object indicates the received multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.6 |
hwGponOltEthernetStatisticReceivedUnicastPaktsThis object indicates the received unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.7 |
hwGponOltEthernetStatisticReceivedLen64BytesThis object indicates the received 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.8 |
hwGponOltEthernetStatisticReceivedLen65To127BytesThis object indicates the received 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.9 |
hwGponOltEthernetStatisticReceivedLen128To255BytesThis object indicates the received 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.10 |
hwGponOltEthernetStatisticReceivedLen256To511BytesThis object indicates the received 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.11 |
hwGponOltEthernetStatisticReceivedLen512To1023BytesThis object indicates the received 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.12 |
hwGponOltEthernetStatisticReceivedLen1024To1518BytesThis object indicates the received 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.13 |
hwGponOltEthernetStatisticReceivedLenMore1518BytesThis object indicates the received over 1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.14 |
hwGponOltEthernetStatisticReceivedBytesThis object indicates the received octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.15 |
hwGponOltEthernetStatisticReceivedTooLongPaktsThis object indicates the received oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.16 |
hwGponOltEthernetStatisticReceivedTooShortPaktsThis object indicates the received undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.17 |
hwGponOltEthernetStatisticReceivedCRCErrPaktsThis object indicates the received error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.18 |
hwGponOltEthernetStatisticSendTotalPaktsThis object indicates the send GEM frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.19 |
hwGponOltEthernetStatisticSendBroadcastPaktsThis object indicates the send broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.20 |
hwGponOltEthernetStatisticSendMulticastPaktsThis object indicates the send multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.21 |
hwGponOltEthernetStatisticSendUnicastPaktsThis object indicates the send unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.22 |
hwGponOltEthernetStatisticSendLen64BytesThis object indicates the sent 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.23 |
hwGponOltEthernetStatisticSendLen65To127BytesThis object indicates the sent 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.24 |
hwGponOltEthernetStatisticSendLen128To255BytesThis object indicates the sent 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.25 |
hwGponOltEthernetStatisticSendLen256To511BytesThis object indicates the sent 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.26 |
hwGponOltEthernetStatisticSendLen512To1023BytesThis object indicates the sent 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.27 |
hwGponOltEthernetStatisticSendLen1024To1518BytesThis object indicates the sent 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.28 |
hwGponOltEthernetStatisticSendLenMore1518BytesThis object indicates the sent over 1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.29 |
hwGponOltEthernetStatisticSendBytesThis object indicates the sent octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.30 |
hwGponOltEthernetStatisticSendMulticastBytesThis object indicates the sent multicast bytes.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.31 |
hwGponOltEtherStatisticSendBufferOverflowDropPaktsThis object indicates the sent overflow drop frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.32 |
hwGponOltEthernetStatisticSendGreenOctetsThis object indicates the sent green frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.33 |
hwGponOltEthernetStatisticSendGreenPaktsThis object indicates the sent green frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.34 |
hwGponOltEthernetStatisticGreenDropPaktsThis object indicates the discarded green packets due to congestion.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.35 |
hwGponOltEthernetStatisticSendYellowOctetsThis object indicates the sent yellow octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.36 |
hwGponOltEthernetStatisticSendYellowPaktsThis object indicates the sent yellow frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.37 |
hwGponOltEthernetStatisticYellowDropPaktsThis object indicates the discarded yellow packets due to congestion.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.38 |
hwGponOltEthernetStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.21.1.50 |
hwGponOltGemStatisticTableThe GPON port GEM frame statistics table.
The index of this table is ifIndex. SEQUENCE OF HwGponOltGemStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.22 |
hwGponOltGemStatisticEntryThe GPON port GEM frame statistics table.
The index of this entry is ifIndex. HwGponOltGemStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.22.1 |
hwGponOltGemStatisticReceivedFramesThis object indicates the received GEM frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.1 |
hwGponOltGemStatisticReceivedOMCIPacktsThis object indicates the recived OMCI frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.2 |
hwGponOltGemStatisticReceivedPLOAMPacktsThis object indicates the recived PLOAM frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.3 |
hwGponOltGemStatisticReceivedIdlePacktsThis object indicates the recived IDLE frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.4 |
hwGponOltGemStatisticSendFramesThis object indicates the sent GEM frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.5 |
hwGponOltGemStatisticSendOMCIPacktsThis object indicates the sent OMCI frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.6 |
hwGponOltGemStatisticSendPLOAMPacktsThis object indicates the sent PLOAM frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.7 |
hwGponOltGemStatisticSendIdlePacktsThis object indicates the sent IDLE frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.8 |
hwGponOltGemStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.22.1.30 |
hwGponOntStatisticTableThe ONT statistics table. This table is used in xpon profile mode.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponOntStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.23 |
hwGponOntStatisticEntryThe ONT statistics table. This table is used in xpon profile mode.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponOntStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.23.1 |
hwGponOntStatisticUpPacktsThis object indicates the upstream frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.23.1.1 |
hwGponOntStatisticDownPacktsThis object indicates the downstream frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.23.1.2 |
hwGponOntStatisticUpBytesThis object indicates the upstream bytes.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.23.1.3 |
hwGponOntStatisticDownBytesThis object indicates the downstream bytes.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.23.1.4 |
hwGponOntStatisticUpDropPacktsThis object indicates the number of upstream discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.23.1.5 |
hwGponOntStatisticDownDropPacktsThis object indicates the number of downstream discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.23.1.6 |
hwGponOntStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.23.1.20 |
hwGponOltGemIndexStatisticTableThe GEM Port statistics table.
The index of this table is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. SEQUENCE OF HwGponOltGemIndexStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.24 |
hwGponOltGemIndexStatisticEntryThe GEM Port statistics table.
The index of this entry is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. HwGponOltGemIndexStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.24.1 |
hwGponDeviceGemIndexObjectIndexThis object indicates the GEM Index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.4.24.1.1 |
hwGponOltGemIndexStatisticUpFramesThis object indicates the upstream frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.24.1.2 |
hwGponOltGemIndexStatisticDownFramesThis object indicates the downstream frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.24.1.3 |
hwGponOltGemIndexStatisticUpBytesThis object indicates the upstream bytes.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.24.1.4 |
hwGponOltGemIndexStatisticDownBytesThis object indicates the downstream bytes.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.24.1.5 |
hwGponOltGemIndexStatisticUpDropFramesThis object indicates the number of upstream discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.24.1.6 |
hwGponOltGemIndexStatisticDownDropFramesThis object indicates the number of downstream discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.24.1.7 |
hwGponOltGemIndexStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.24.1.20 |
hwGponOntEthernetStatisticTableThe ONT ETH port statistics table.
The index of this table is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceOntEthernetPortId. SEQUENCE OF HwGponOntEthernetStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.25 |
hwGponOntEthernetStatisticEntryThe ONT ETH port statistics table.
The index of this entry is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceOntEthernetPortId. HwGponOntEthernetStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.25.1 |
hwGponOntEthernetStatisticDataSourceThis object indicates the ONT ETH statistics data source.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.1 |
hwGponOntEthernetStatisticRecvDropEventsThis object indicates the number of received and discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.2 |
hwGponOntEthernetStatisticRecvOctetsThis object indicates the received bytes.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.3 |
hwGponOntEthernetStatisticRecvPktsThis object indicates the received frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.4 |
hwGponOntEthernetStatisticRecvBroadcastPktsThis object indicates the received broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.5 |
hwGponOntEthernetStatisticRecvMulticastPktsThis object indicates the received multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.6 |
hwGponOntEthernetStatisticRecvCRCAlignErrorsThis object indicates the received CRC error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.7 |
hwGponOntEthernetStatisticRecvUndersizePktsThis object indicates the received undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.8 |
hwGponOntEthernetStatisticMTUExceededDiscardFramesThis object indicates the send MTU exceeded discard frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.9 |
hwGponOntEthernetStatisticRecvFragmentsThis object indicates the number of received fragments.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.10 |
hwGponOntEthernetStatisticRecvJabbersThis object indicates the received Jabber error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.11 |
hwGponOntEthernetStatisticCollisionsThis object indicates the count of collisions.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.12 |
hwGponOntEthernetStatisticRecvPkts64OctetsThis object indicates the received 64-octet framesro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.13 |
hwGponOntEthernetStatisticRecvPkts65to127OctetsThis object indicates the received 65~127-octet framesro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.14 |
hwGponOntEthernetStatisticRecvPkts128to255OctetsThis object indicates the received 128~255-octet framesro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.15 |
hwGponOntEthernetStatisticRecvPkts256to511OctetsThis object indicates the received 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.16 |
hwGponOntEthernetStatisticRecvPkts512to1023OctetsThis object indicates the received 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.17 |
hwGponOntEthernetStatisticRecvPkts1024to1518OctetsThis object indicates the received 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.18 |
hwGponOntEthernetStatisticRecvFCSErrorsThis object indicates the received FCS error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.19 |
hwGponOntEthernetStatisticSendExcessiveCollisionThis object indicates the sent excessive collision frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.20 |
hwGponOntEthernetStatisticSendLateCollisionThis object indicates the sent late collision frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.21 |
hwGponOntEthernetStatisticRecvFrameTooLongsThis object indicates the received oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.22 |
hwGponOntEthernetStatisticRecvBufferOverflowsonThis object indicates the number of received buffer overflows.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.23 |
hwGponOntEthernetStatisticSendBufferOverflowsonThis object indicates the number of sent buffer overflows.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.24 |
hwGponOntEthernetStatisticSendSingleCollisionFrameThis object indicates the number of deferred sent frames due to single collision.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.25 |
hwGponOntEthernetStatisticSendMultipleCollisionsFrameThis object indicates the number of deferred sent frames due to multiple collisions.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.26 |
hwGponOntEthernetStatisticSendSQETestErrorThis object indicates the number of SQE test error messages.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.27 |
hwGponOntEthernetStatisticDeferredTransmissionThis object indicates the sent deferred frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.28 |
hwGponOntEthernetStatisticInternalmacTransmitErrorThis object indicates the sent error frames at the MAC sub-layer.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.29 |
hwGponOntEthernetStatisticSendCarrierSenseErrorThis object indicates the sent carrier sense errors.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.30 |
hwGponOntEthernetStatisticRecvAlignmentErrorThis object indicates the received alignment error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.31 |
hwGponOntEthernetStatisticInternalMACReceiveErrorThis object indicates the received error frames at the MAC sub-layer.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.32 |
hwGponOntEthernetStatisticRecvPPPoEFilteredFrameThis object indicates the received PPPoE filtered frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.33 |
hwGponOntEthernetStatisticSendForwardedFrameThis object indicates the send frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.34 |
hwGponOntEthernetStatisticDelayExceededDiscardThis object indicates the discarded frames due to delay.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.35 |
hwGponOntEthernetStatisticRecvUnicastPktsThis object indicates the received unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.36 |
hwGponOntEthernetStatisticSendUnicastPktsThis object indicates the sent unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.37 |
hwGponOntEthernetStatisticSendBroadcastPktsThis object indicates the sent broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.38 |
hwGponOntEthernetStatisticSendMulticastPktsThis object indicates the sent multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.39 |
hwGponOntEthernetStatisticRecvPauseFlowCtrlFrameThis object indicates the received pause flow control frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.40 |
hwGponOntEthernetStatisticSendPauseFlowCtrlFrameThis object indicates the sent pause flow control frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.41 |
hwGponOntEthernetStatisticRecvGoodPktsOctetsThis object indicates the received right octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.42 |
hwGponOntEthernetStatisticSendGoodPktsOctetsThis object indicates the sent good frames octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.43 |
hwGponOntEthernetStatisticRecvBadPktsOctetsThis object indicates the received error octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.44 |
hwGponOntEthernetStatisticSendBadPktsOctetsThis object indicates the sent error octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.45 |
hwGponOntEthernetStatisticSendOctetsThis object indicates the sent error octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.46 |
hwGponOntEthernetStatisticForwardDropEventsThis object indicates the sent drop events.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.47 |
hwGponOntEthernetStatisticSendPkts64OctetsThis object indicates the sent 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.48 |
hwGponOntEthernetStatisticSendPkts65to127OctetsThis object indicates the sent 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.49 |
hwGponOntEthernetStatisticSendPkts128to255OctetsThis object indicates the sent 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.50 |
hwGponOntEthernetStatisticSendPkts256to511OctetsThis object indicates the sent 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.51 |
hwGponOntEthernetStatisticSendPkts512to1023OctetsThis object indicates the sent 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.52 |
hwGponOntEthernetStatisticSendPkts1024to1518OctetsThis object indicates the sent 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.53 |
hwGponOntEthernetStatisticSendPktsOversizeThis object indicates the sent oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.54 |
hwGponOntEthernetStatisticRecvPkts1519toOversizeOctetsThis object indicates the received 1519~oversize-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.55 |
hwGponOntEthernetStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.60 |
hwGponOntEthernetStatisticStateChangeTimesThis object indicates the ONT ethernet port state changed times.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.61 |
hwGponOntEthernetStatisticDurationIndicates the statistic duration of the GPON ONT ethernet port.
Unit: secondro Gauge32 UNITS "second" .1.3.6.1.4.1.2011.6.128.1.1.4.25.1.62 |
hwGponOntGemIndexStatisticTableThe ONT GEM Port statistics table.
The index of this table is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. SEQUENCE OF HwGponOntGemIndexStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.26 |
hwGponOntGemIndexStatisticEntryThe ONT GEM Port statistics table.
The index of this entry is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. HwGponOntGemIndexStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.26.1 |
hwGponOntGemIndexStatisticRecvLostFramesThis object indicates the loss of frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.26.1.1 |
hwGponOntGemIndexStatisticMisinsertedFramesThis object indicates the misinserted frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.26.1.2 |
hwGponOntGemIndexStatisticRecvFramesThis object indicates the received frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.26.1.3 |
hwGponOntGemIndexStatisticRecvBlocksThis object indicates the received blocks.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.26.1.4 |
hwGponOntGemIndexStatisticSendBlocksThis object indicates the sent blocks.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.26.1.5 |
hwGponOntGemIndexStatisticImpairedBlocksThis object indicates the number of received impaired data blocks.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.26.1.6 |
hwGponOntGemIndexStatisticTransmittedGemFramesThis object indicates the number of transmitted GEM frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.26.1.7 |
hwGponOntGemIndexStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.26.1.20 |
hwGponOntTrafficFlowStatisticTableThe ONT traffic stream statistics table.
The index of this table is a combination of ifIndex and hwGponDeviceOntIndex. SEQUENCE OF HwGponOntTrafficFlowStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.27 |
hwGponOntTrafficFlowStatisticEntryThe ONT traffic stream statistics table.
The index of this entry is a combination of ifIndex and hwGponDeviceOntIndex. HwGponOntTrafficFlowStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.27.1 |
hwGponOntTrafficFlowStatisticLofiAlarmStatsCntThis object indicates the number of the ONT LOFI alarms.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.1 |
hwGponOntTrafficFlowStatisticUpFramesScapeErrCntThis object indicates the number of ONT upstream scape error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.2 |
hwGponOntTrafficFlowStatisticUpFrameBipErrCntThis object indicates the number of ONT upstream frames with BIP errors.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.3 |
hwGponOntTrafficFlowStatisticDnFramesBipErrCntThis object indicates the number of ONT downstream frames with BIP errors.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.4 |
hwGponOntTrafficFlowStatisticUpFecDecodCorrectCntThis object indicates the number of upstream FEC decoding corrected blocks.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.5 |
hwGponOntTrafficFlowStatisticUpFecDecodUnCorrectCntThis object indicates the number of upstream FEC decoding uncorrected blocks.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.6 |
hwGponOntTrafficFlowStatisticUpHecCheckErrCntThis object indicates the number of upstream HEC errors.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.7 |
hwGponOntTrafficFlowStatisticDowiAlarmCntThe count of ONU DOWi(Drift of Window) Alarm.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.8 |
hwGponOntTrafficFlowStatisticUpFecCodeDecodCorrectCntThis object indicates the number of upstream FEC code decoding corrected blocks.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.9 |
hwGponOntTrafficFlowStatisticUpFecCodeCntThis object indicates the number of upstream FEC code blocks.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.10 |
hwGponOntTrafficFlowStatisticUpFcsErrorCntThis object indicates the number of upstream FCS code errors in current 15 minutes.
The value (-1) indicates that the query fails or no information is detected.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.11 |
hwGponOntTrafficFlowStatisticUpFrameBitErrorRatioThis object indicates upstream frame bit error ratio in current 15 minutes.
The value of this object indicates the exponente of the exponential expression of the upstream frame bit error ratio.
For example, if the upstream frame bit error ratio is calculated to be (0.0012), the exponential expression is 1.2E-3.
The multiplicando (1.2) is ignored, and the value of this object is (3).
The value (-1) indicates that the query fails or no information is detected.
The value (0xFFFFFFE) indicates that the bit error ratio is (0).
The value (0) indicates that the bit error ratio is (1).ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.12 |
hwGponOntTrafficFlowStatisticUpEthFrameErrorRatioThis object indicates upstream ETH frame error ratio in current 15 minutes.
The value of this object indicates the exponente of the exponential expression of the upstream ETH frame error ratio.
For example, if the upstream ETH frame bit error ratio is calculated to be (0.0012), the exponential expression is 1.2E-3.
The multiplicando (1.2) is ignored, and the value of this object is (3).
The value (-1) indicates that the query fails or no information is detected.
The value (0xFFFFFFE) indicates that the bit error ratio is (0).
The value (0) indicates that the bit error ratio is (1).ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.13 |
hwGponOntTrafficFlowStatisticUpGemFrameErrorRatioThis object indicates upstream GEM frame error ratio in current 15 minutes.
The value of this object indicates the exponente of the exponential expression of the upstream GEM frame error ratio.
For example, if the upstream GEM frame bit error ratio is calculated to be (0.0012), the exponential expression is 1.2E-3.
The multiplicando (1.2) is ignored, and the value of this object is (3).
The value (-1) indicates that the query fails or no information is detected.
The value (0xFFFFFFE) indicates that the bit error ratio is (0).
The value (0) indicates that the bit error ratio is (1).ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.14 |
hwGponOntTrafficFlowStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.27.1.20 |
hwEponOltEthernetStatisticTableThe OLT ETH statisitcs table. The index of this table is ifIndex. SEQUENCE OF HwEponOltEthernetStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.41 |
hwEponOltEthernetStatisticEntryThe OLT ETH statisitcs table. The index of this entry is ifIndex. HwEponOltEthernetStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.41.1 |
hwEponOltEthernetStatisticRcvFramesThis object indicates the received frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.1 |
hwEponOltEthernetStatisticRcvBoardcastFramesThis object indicates the received broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.2 |
hwEponOltEthernetStatisticRcvMulticastFramesThis object indicates the received multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.3 |
hwEponOltEthernetStatisticRcvUnicastFramesThis object indicates the received unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.4 |
hwEponOltEthernetStatisticRcv64OctetFramesThis object indicates the received 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.5 |
hwEponOltEthernetStatisticRcv65to127OctetFramesThis object indicates the received 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.6 |
hwEponOltEthernetStatisticRcv128to255OctetFramesThis object indicates the received 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.7 |
hwEponOltEthernetStatisticRcv256to511OctetFramesThis object indicates the received 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.8 |
hwEponOltEthernetStatisticRcv512to1023OctetFramesThis object indicates the received 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.9 |
hwEponOltEthernetStatisticRcv1024to1518OctetFramesThis object indicates the received 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.10 |
hwEponOltEthernetStatisticRcvOver1518OctetFramesThis object indicates the received over 1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.11 |
hwEponOltEthernetStatisticRcvOctetsThis object indicates the received octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.12 |
hwEponOltEthernetStatisticRcvOversizeFramesThis object indicates the received oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.13 |
hwEponOltEthernetStatisticRcvUndersizeFramesThis object indicates the received undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.14 |
hwEponOltEthernetStatisticRcvCrcErrorFramesThis object indicates the received CRC error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.15 |
hwEponOltEthernetStatisticRcvDiscardFramesThis object indicates the received discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.16 |
hwEponOltEthernetStatisticSendFramesThis object indicates the sent frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.17 |
hwEponOltEthernetStatisticSendBoardcastFramesThis object indicates the sent broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.18 |
hwEponOltEthernetStatisticSendMulticastFramesThis object indicates the sent multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.19 |
hwEponOltEthernetStatisticSendUnicastFramesThis object indicates the sent unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.20 |
hwEponOltEthernetStatisticSend64OctetFramesThis object indicates the sent 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.21 |
hwEponOltEthernetStatisticSend65to127OctetFramesThis object indicates the sent 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.22 |
hwEponOltEthernetStatisticSend128to255OctetFramesThis object indicates the sent 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.23 |
hwEponOltEthernetStatisticSend256to511OctetFramesThis object indicates the sent 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.24 |
hwEponOltEthernetStatisticSend512to1023OctetFramesThis object indicates the sent 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.25 |
hwEponOltEthernetStatisticSend1024to1518OctetFramesThis object indicates the sent 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.26 |
hwEponOltEthernetStatisticSendOver1518OctetFramesThis object indicates the sent over 1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.27 |
hwEponOltEthernetStatisticSendOctetsThis object indicates the sent octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.28 |
hwEponOltEthernetStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.50 |
hwEponOltEthernetStatisticRcvErrorFramesThis object indicates the received error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.51 |
hwEponOltEthernetStatisticRcvFragmentsThis object indicates the received fragments.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.52 |
hwEponOltEthernetStatisticRcvJabbersThis object indicates the received jabbers.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.53 |
hwEponOltEthernetStatisticRcvDropEventsThis object indicates the received drop events.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.54 |
hwEponOltEthernetStatisticSendDropEventsThis object indicates the send drop events.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.55 |
hwEponOltEthernetStatisticSendDiscardFramesThis object indicates the send discard frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.56 |
hwEponOltEthernetStatisticSendErrorFramesThis object indicates the send error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.57 |
hwEponOltEthernetStatisticSendCrcErrorFramesThis object indicates the send CRC error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.58 |
hwEponOltEthernetStatisticSendUndersizeFramesThis object indicates the send undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.59 |
hwEponOltEthernetStatisticSendOversizeFramesThis object indicates the send oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.60 |
hwEponOltEthernetStatisticSendFragmentsThis object indicates the send fragments.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.61 |
hwEponOltEthernetStatisticSendJabbersThis object indicates the send jabbers.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.41.1.62 |
hwEponOltLlidStatisticTableThe OLT LLID statistics table.
The index of this table is a combination of ifIndex,
hwEponDeviceOntIndex and hwEponDeviceOntLlid. SEQUENCE OF HwEponOltLlidStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.42 |
hwEponOltLlidStatisticEntryThe OLT LLID statistics table.
The index of this entry is a combination of ifIndex,
hwEponDeviceOntIndex and hwEponDeviceOntLlid. HwEponOltLlidStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.42.1 |
hwEponDeviceOntLlidThis object indicates the ONT LLID. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.1 |
hwEponOltLlidStatisticRecvDataFramesThis object indicates the received data frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.2 |
hwEponOltLlidStatisticRecvDataBytesThis object indicates the received data octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.3 |
hwEponOltLlidStatisticRecvUnicastFramesThis object indicates the received unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.4 |
hwEponOltLlidStatisticRecvMulticastFramesThis object indicates the received multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.5 |
hwEponOltLlidStatisticRecvBoardcastFramesThis object indicates the received broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.6 |
hwEponOltLlidStatisticRecvRightFramesThis object indicates the received right frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.7 |
hwEponOltLlidStatisticRecvRightBytesThis object indicates the received right octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.8 |
hwEponOltLlidStatisticRecvErrorFramesThis object indicates the received error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.9 |
hwEponOltLlidStatisticRecvErrorBytesThis object indicates the received error octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.10 |
hwEponOltLlidStatisticRecv64ByteFramesThis object indicates the received 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.11 |
hwEponOltLlidStatisticRecv65to127ByteFramesThis object indicates the received 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.12 |
hwEponOltLlidStatisticRecv128to255ByteFramesThis object indicates the received 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.13 |
hwEponOltLlidStatisticRecv256to511ByteFramesThis object indicates the received 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.14 |
hwEponOltLlidStatisticRecv512to1023ByteFramesThis object indicates the received 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.15 |
hwEponOltLlidStatisticRecv1024to1518ByteFramesThis object indicates the received 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.16 |
hwEponOltLlidStatisticRecvOver1518ByteFramesThis object indicates the received over 1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.17 |
hwEponOltLlidStatisticRecvUndersizeFramesThis object indicates the received undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.18 |
hwEponOltLlidStatisticRecvOversizeFramesThis object indicates the received oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.19 |
hwEponOltLlidStatisticRecvFcsErrorFramesThis object indicates the received FCS error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.20 |
hwEponOltLlidStatisticTransDataFramesThis object indicates the sent data frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.21 |
hwEponOltLlidStatisticTransDataBytesThis object indicates the sent data octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.22 |
hwEponOltLlidStatisticTransUnicastFramesThis object indicates the sent unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.23 |
hwEponOltLlidStatisticTransMulticastFramesThis object indicates the sent multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.24 |
hwEponOltLlidStatisticTransBoardcastFramesThis object indicates the sent broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.25 |
hwEponOltLlidStatisticTrans64ByteFramesThis object indicates the sent 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.26 |
hwEponOltLlidStatisticTrans65to127ByteFramesThis object indicates the sent 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.27 |
hwEponOltLlidStatisticTrans128to255ByteFramesThis object indicates the sent 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.28 |
hwEponOltLlidStatisticTrans256to511ByteFramesThis object indicates the sent 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.29 |
hwEponOltLlidStatisticTrans512to1023ByteFramesThis object indicates the sent 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.30 |
hwEponOltLlidStatisticTrans1024to1518ByteFramesThis object indicates the sent 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.31 |
hwEponOltLlidStatisticTransOver1518ByteFramesThis object indicates the sent over 1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.32 |
hwEponOltLlidStatisticTransFcsErrorFramesThis object indicates the sent FCS error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.33 |
hwEponOltLlidStatisticRecvLineCodeErrorFramesReceived line code error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.34 |
hwEponOltLlidStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.50 |
hwEponOltLlidStatisticRecvCrcErrorFramesThis object indicates the recieved CRC error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.51 |
hwEponOltLlidStatisticRecvFragmentsThis object indicates the recieved fragments.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.52 |
hwEponOltLlidStatisticRecvJabbersThis object indicates the recieved jabbers.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.53 |
hwEponOltLlidStatisticRecvDiscardFramesThis object indicates the recieved discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.54 |
hwEponOltLlidStatisticRecvDropEventsThis object indicates the recieved drop events.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.55 |
hwEponOltLlidStatisticTransDropEventsThis object indicates the sent drop events.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.56 |
hwEponOltLlidStatisticTransDiscardFramesThis object indicates the sent discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.57 |
hwEponOltLlidStatisticTransErrorFramesThis object indicates the sent error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.58 |
hwEponOltLlidStatisticTransCrcErrorFramesThis object indicates the sent CRC error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.59 |
hwEponOltLlidStatisticTransUndersizeFramesThis object indicates the sent undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.60 |
hwEponOltLlidStatisticTransOversizeFramesThis object indicates the sent oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.61 |
hwEponOltLlidStatisticTransFragmentsThis object indicates the sent fragments.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.62 |
hwEponOltLlidStatisticTransJabbersThis object indicates the sent jabbers.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.42.1.63 |
hwEponOntEthernetPortStatisticTableThe ONT ETH port statistics table.
The index of this table is a combination of ifIndex,
hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. SEQUENCE OF HwEponOntEthernetPortStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.43 |
hwEponOntEthernetPortStatisticEntryThe ONT ETH port statistics table.
The index of this entry is a combination of ifIndex,
hwEponDeviceOntIndex and hwEponDeviceOntEthernetPortId. HwEponOntEthernetPortStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.43.1 |
hwEponOntEthernetPortStatisticRecvFramesThis object indicates the received frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.1 |
hwEponOntEthernetPortStatisticRecvMulticastFramesThis object indicates the received multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.2 |
hwEponOntEthernetPortStatisticRecvBroadcastFramesThis object indicates the received boardcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.3 |
hwEponOntEthernetPortStatisticRecv64OctetFramesThis object indicates the received 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.4 |
hwEponOntEthernetPortStatisticRecv65to127OctetFramesThis object indicates the received 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.5 |
hwEponOntEthernetPortStatisticRecv128to255OctetFramesThis object indicates the received 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.6 |
hwEponOntEthernetPortStatisticRecv256to511OctetFramesThis object indicates the received 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.7 |
hwEponOntEthernetPortStatisticRecv512to1023OctetFramesThis object indicates the received 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.8 |
hwEponOntEthernetPortStatisticRecv1024to1518OctetFramesThis object indicates the received 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.9 |
hwEponOntEthernetPortStatisticRecvUndersizeFramesThis object indicates the received undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.10 |
hwEponOntEthernetPortStatisticRecvTooLongFramesThis object indicates the received oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.11 |
hwEponOntEthernetPortStatisticRecvFragmentsThis object indicates the received fragments.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.12 |
hwEponOntEthernetPortStatisticRecvJabberErrorFramesThis object indicates the received jabbers error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.13 |
hwEponOntEthernetPortStatisticRecvFCSErrorFramesThis object indicates the received FCS error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.14 |
hwEponOntEthernetPortStatisticRecvDropFramesThis object indicates the received discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.15 |
hwEponOntEthernetPortStatisticRecvAlignmentErrorFramesThis object indicates the received alignment error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.16 |
hwEponOntEthernetPortStatisticInternalMACRecvErrorFramesThis object indicates the received error frames at the MAC sub-layer.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.17 |
hwEponOntEthernetPortStatisticRecvPPPoEFilteredFramesThis object indicates the received PPPoE filtered frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.18 |
hwEponOntEthernetPortStatisticRecvBufferOverflowsThis object indicates the received buffer overflows.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.19 |
hwEponOntEthernetPortStatisticRecvOctetsThis object indicates the received octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.20 |
hwEponOntEthernetPortStatisticTransFramesThis object indicates the sent frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.21 |
hwEponOntEthernetPortStatisticTransDeferredFramesThis object indicates the sent deferred frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.22 |
hwEponOntEthernetPortStatisticTransMTUExceededDiscardFramesThis object indicates the sent MTU exceeded discard frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.23 |
hwEponOntEthernetPortStatisticTransCarrierSenseErrorFramesThis object indicates the sent carrier sense errors.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.24 |
hwEponOntEthernetPortStatisticTransSQETestErrorFramesThis object indicates the sent SQE test errors.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.25 |
hwEponOntEthernetPortStatisticTransSingleCollisionFramesThis object indicates the sent single collision frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.26 |
hwEponOntEthernetPortStatisticTransMultipleCollisionsFramesThis object indicates the sent multiple collision frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.27 |
hwEponOntEthernetPortStatisticTransExcessiveCollisionFramesThis object indicates the sent excessive collision frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.28 |
hwEponOntEthernetPortStatisticTransLateCollisionFramesThis object indicates the sent late collisions.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.29 |
hwEponOntEthernetPortStatisticInternalmacTransErrorFramesThis object indicates the sent error frames at the MAC sub-layer.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.30 |
hwEponOntEthernetPortStatisticTransBufferOverflowsThis object indicates the sent buffer overflows.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.31 |
hwEponOntEthernetPortStatisticTransOctetsThis object indicates the sent octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.32 |
hwEponOntEthernetPortStatisticStateChangeThis object indicates the state changed times.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.33 |
hwEponOntEthernetPortStatisticTransUnicastFramesThis object indicates the sent unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.34 |
hwEponOntEthernetPortStatisticTransBroadcastFramesThis object indicates the sent broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.35 |
hwEponOntEthernetPortStatisticTransMulticastFramesThis object indicates the sent multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.36 |
hwEponOntEthernetPortStatisticRecv1519toOversizeOctetFramesThis object indicates the received 1519~oversize-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.37 |
hwEponOntEthernetPortStatisticRecvUnicastFramesThis object indicates the received unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.38 |
hwEponOntEthernetPortStatisticTrans64OctetFramesThis object indicates the sent 64-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.39 |
hwEponOntEthernetPortStatisticTrans65to127OctetFramesThis object indicates the sent 65~127-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.40 |
hwEponOntEthernetPortStatisticTrans128to255OctetFramesThis object indicates the sent 128~255-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.41 |
hwEponOntEthernetPortStatisticTrans256to511OctetFramesThis object indicates the sent 256~511-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.42 |
hwEponOntEthernetPortStatisticTrans512to1023OctetFramesThis object indicates the sent 512~1023-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.43 |
hwEponOntEthernetPortStatisticTrans1024to1518OctetFramesThis object indicates the sent 1024~1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.44 |
hwEponOntEthernetPortStatisticTransOver1518OctetFramesThis object indicates the sent over 1518-octet frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.45 |
hwEponOntEthernetPortStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.50 |
hwEponOntEthernetPortStatisticRecvErrorFramesThis object indicates the received error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.51 |
hwEponOntEthernetPortStatisticRecvCrcErrorFramesThis object indicates the received CRC error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.52 |
hwEponOntEthernetPortStatisticRecvDropEventsThis object indicates the received drop events.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.53 |
hwEponOntEthernetPortStatisticTransDropEventsThis object indicates the sent drop events.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.54 |
hwEponOntEthernetPortStatisticTransDiscardFramesThis object indicates the sent discarded frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.55 |
hwEponOntEthernetPortStatisticTransErrorFramesThis object indicates the sent error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.56 |
hwEponOntEthernetPortStatisticTransCrcErrorFramesThis object indicates the sent CRC error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.57 |
hwEponOntEthernetPortStatisticTransUndersizeFramesThis object indicates the sent undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.58 |
hwEponOntEthernetPortStatisticTransOversizeFramesThis object indicates the sent oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.59 |
hwEponOntEthernetPortStatisticTransFragmentsThis object indicates the sent fragments.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.60 |
hwEponOntEthernetPortStatisticTransJabbersThis object indicates the sent jabbers.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.43.1.61 |
hwEponOntCPUStatisticTableThe ONT CPU statistics table.
The index of this table is a combination of ifIndex, and hwEponDeviceOntIndex. SEQUENCE OF HwEponOntCPUStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.44 |
hwEponOntCPUStatisticEntryThe ONT CPU statistics table.
The index of this entry is a combination of ifIndex, and hwEponDeviceOntIndex. HwEponOntCPUStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.44.1 |
hwEponOntCPUStatisticIGMPThis object indicates the IGMP frames transmitted through the CPU.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.44.1.1 |
hwEponOntCPUStatisticARPThis object indicates the ARP frames transmitted through the CPU.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.44.1.2 |
hwEponOntCPUStatisticDHCPThis object indicates the DHCP frames transmitted through the CPU.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.44.1.3 |
hwEponOntCPUStatisticPPPOEThis object indicates the PPPOE frames transmitted through the CPU.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.44.1.4 |
hwEponOntCPUStatisticVOIPThis object indicates the VOIP frames transmitted through the CPU.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.44.1.5 |
hwEponOntCPUStatisticDBPUThis object indicates the BPDU frames transmitted through the CPU.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.44.1.6 |
hwEponOntCPUStatisticOTHERThis object indicates the other frames transmitted through the CPU.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.44.1.7 |
hwEponOntCPUStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.44.1.20 |
hwGponTDMPortStatisticTableThis is the E1 perform monitor statistic table.
The index of this table is a combination of ifIndex, hwGponTDMPortStatisticOntIndex,
hwGponTDMPortStatisticOntPhyType and hwGponTDMPortStatisticOntPhyIndex. SEQUENCE OF HwGponTDMPortStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.45 |
hwGponTDMPortStatisticEntryThis is the E1 perform monitor statistic table.
The index of this entry is a combination of ifIndex, hwGponTDMPortStatisticOntIndex,
hwGponTDMPortStatisticOntPhyType and hwGponTDMPortStatisticOntPhyIndex. HwGponTDMPortStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.45.1 |
hwGponTDMPortStatisticOntIndexThis object indicates the ONT index. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.4.45.1.1 |
hwGponTDMPortStatisticOntPhyTypeThis object indicates the port type of the ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.4.45.1.2 |
hwGponTDMPortStatisticOntPhyIndexThis object indicates the port index of the ONT. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.4.45.1.3 |
hwGponTDMPortStatisticDataESThis object indicates the statistic of the errored seconds.ro Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.4.45.1.4 |
hwGponTDMPortStatisticDataSESThis object indicates the statistic of the serverly erroeds.ro Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.4.45.1.5 |
hwGponTDMPortStatisticDataUASThis object indicates the statistic of the unavailable seconds.ro Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.4.45.1.6 |
hwGponTDMPortStatisticDataEFSThis object indicates the statistic of the error free Seconds.ro Gauge32 .1.3.6.1.4.1.2011.6.128.1.1.4.45.1.7 |
hwGponTDMPortStatisticClearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.45.1.20 |
hwEponOntLineQualityStatisticTableThis table is used to query or clear the statistics for the EPON line quality.
The index of this table is a combination of ifIndex and hwEponDeviceOntIndex. SEQUENCE OF HwEponOntLineQualityStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.46 |
hwEponOntLineQualityStatisticEntryThis table is used to query or clear the statistics for the EPON line quality.
The index of this entry is a combination of ifIndex and hwEponDeviceOntIndex. HwEponOntLineQualityStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.46.1 |
hwEponOntLineQualityStatisticFCSErrorThis object indicates the number of queried FCS error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.46.1.1 |
hwEponOntLineQualityStatisticLineCodeErrorThis object indicates the number of queried line coding error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.46.1.2 |
hwEponOntLineQualityStatisticFrameLengthInrangeErrorThis object indicates the number of error frames whose frames lengths are not within a valid range.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.46.1.3 |
hwEponOntLineQualityStatisticLLIDMismatchErrorThis object indicates the number of queried error frames whose LLIDs are mismatched.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.46.1.4 |
hwEponOntLineQualityStatisticclearThis object is used to clear the statistics.
Options:
1. clear(1) - Indicates that clear the statistics
2. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.46.1.5 |
hwEponOltChannelEthernetStatisticTableThe OLT channel ETH statisitcs table.
The index of this table is a combination of ifIndex and hwEponOltChannelId. SEQUENCE OF HwEponOltChannelEthernetStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.47 |
hwEponOltChannelEthernetStatisticEntryThe OLT channel ETH statisitcs table.
The index of this entry is a combination of ifIndex and hwEponOltChannelId. HwEponOltChannelEthernetStatisticEntry .1.3.6.1.4.1.2011.6.128.1.1.4.47.1 |
hwEponOltChannelIdThis object indicates the channel number.
Options:
1. oneGbitChannel(1) - Indicates that the channel number is 1G
2. tenGbitChannel(2) - Indicates that the channel number is 10G
3. twoGbitChannel(3) - Indicates that the channel number is 2G
4. invalid(-1) - Indicates that the query fails or no information is detected Enumeration .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.1 |
hwEponOltChannelEthernetStatisticRcvOctetsThis object indicates the received octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.2 |
hwEponOltChannelEthernetStatisticRcvFramesThis object indicates the received frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.3 |
hwEponOltChannelEthernetStatisticRcvBroadcastFramesThis object indicates the received broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.4 |
hwEponOltChannelEthernetStatisticRcvMulticastFramesThis object indicates the received multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.5 |
hwEponOltChannelEthernetStatisticRcvUnicastFramesThis object indicates the received unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.6 |
hwEponOltChannelEthernetStatisticRcvOversizeFramesThis object indicates the received oversize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.7 |
hwEponOltChannelEthernetStatisticRcvUndersizeFramesThis object indicates the received undersize frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.8 |
hwEponOltChannelEthernetStatisticRcvCrcErrorFramesThis object indicates the received CRC error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.9 |
hwEponOltChannelEthernetStatisticRcvLlidErrorFramesThis object indicates the received LLID error frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.10 |
hwEponOltChannelEthernetStatisticRcvUngrantedFramesThis object indicates the received ungranted frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.11 |
hwEponOltChannelEthernetStatisticSendOctetsThis object indicates the sent octets.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.12 |
hwEponOltChannelEthernetStatisticSendFramesThis object indicates the sent frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.13 |
hwEponOltChannelEthernetStatisticSendBroadcastFramesThis object indicates the sent broadcast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.14 |
hwEponOltChannelEthernetStatisticSendMulticastFramesThis object indicates the sent multicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.15 |
hwEponOltChannelEthernetStatisticSendUnicastFramesThis object indicates the sent unicast frames.ro Counter64 .1.3.6.1.4.1.2011.6.128.1.1.4.47.1.16 |
hwXponDeviceLoopbackObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1.1.5 |
hwGponDeviceGemLoopbackTableThis is the GEM port loopback table.
This table is used to configure and query the GEM port loopack.
The index of this table is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. SEQUENCE OF HwGponDeviceGemLoopbackEntry .1.3.6.1.4.1.2011.6.128.1.1.5.1 |
hwGponDeviceGemLoopbackEntryThis is the GEM port loopback table.
This table is used to configure and query the GEM port loopack.
The index of this entry is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. HwGponDeviceGemLoopbackEntry .1.3.6.1.4.1.2011.6.128.1.1.5.1.1 |
hwGponGemOltLoopbackTypeThis object indicates the type of OLT GEM port loopback.
Options:
1. noloopback(1) - No Loopback
2. oltremoteinnerloopback(2) - From OLT GEM port to OLT NNI
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.1.1.1 |
hwGponGemOntLoopbackTypeThis object indicates the type of ONT GEM port loopback.
Options:
1. noloopback(1) - No Loopback
2. ontremoteinnerloopback(2) - From ONT GEM port to OLT NNI
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.1.1.2 |
hwXponDeviceOntUniLoopbackTableThis is the ONT UNI loopback table.
This table is used to configure and query the ONT UNI loopack.
The index of this table is a combination of ifIndex, hwXponDeviceOntIndex,
hwXponOntUniPhyType and hwXponOntUniPhyIndex. SEQUENCE OF HwXponDeviceOntUniLoopbackEntry .1.3.6.1.4.1.2011.6.128.1.1.5.2 |
hwXponDeviceOntUniLoopbackEntryThis is the ONT UNI loopback table.
This table is used to configure and query the ONT UNI loopack.
The index of this entry is a combination of ifIndex, hwXponDeviceOntIndex,
hwXponOntUniPhyType and hwXponOntUniPhyIndex. HwXponDeviceOntUniLoopbackEntry .1.3.6.1.4.1.2011.6.128.1.1.5.2.1 |
hwXponOntUniPhyTypeThis object indicates the physical type of ONT UNI.
Options:
1. t1(13) - T1
2. e1(14) - E1
3. fe(24) - FE
4. ge(34) - GE
5. vdsl(37) - VDSL
6. moca(46) - MOCA
7. eth(47) - ETH
8. iphost(50) - IPHOST Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.2.1.1 |
hwXponOntUniPhyIndexThis object indicates the physical Index of ONT UNI. Integer32 .1.3.6.1.4.1.2011.6.128.1.1.5.2.1.2 |
hwXponOntUniLoopbackTypeThis object indicates the type of ONT UNI loopback.
Options:
1. noloopback(1) - No Loopback
2. remoteinnerloopback(2) - From ONT UNI to OLT NNI
3. remoteouterloopback(4) - From ONT NNI to OLT UNI
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.2.1.3 |
hwXponDeviceOltLoopbackTableThis is the OLT loopback table.
This table is used to configure and query the loopack based on OLT.
The index of this table is ifIndex. SEQUENCE OF HwXponDeviceOltLoopbackEntry .1.3.6.1.4.1.2011.6.128.1.1.5.3 |
hwXponDeviceOltLoopbackEntryThis is the OLT loopback table.
This table is used to configure and query the loopack based on OLT.
The index of this entry is ifIndex. HwXponDeviceOltLoopbackEntry .1.3.6.1.4.1.2011.6.128.1.1.5.3.1 |
hwXponOltInnerLoopbackThis object indicates the switch of OLT PON interface inner loopback.
inner loopback: From OLT interface to NNI.
Options:
1. disable(1) - Disable the switch of OLT PON interface inner loopback
2. enable(2) - Enable the switch of OLT PON interface inner loopback
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.3.1.1 |
hwXponOltOuterLoopbackThis object indicates the switch of OLT PON interface outer loopback.
outer-loopback: From OLT interface to ONT UNI.
Options:
1. disable(1) - Disable the switch of OLT PON interface outer loopback
2. enable(2) - Enable the switch of OLT PON interface outer loopback
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.3.1.2 |
hwXponDeviceOntExtLoopbackTableThis is the ONT extend loopback table.
This table is used to configure and query the loopack based on the whole ONT.
The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. SEQUENCE OF HwXponDeviceOntExtLoopbackEntry .1.3.6.1.4.1.2011.6.128.1.1.5.4 |
hwXponDeviceOntExtLoopbackEntryThis is the ONT extend loopback table.
This table is used to configure and query the loopack based on the whole ONT.
The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex. HwXponDeviceOntExtLoopbackEntry .1.3.6.1.4.1.2011.6.128.1.1.5.4.1 |
hwXponOntNniInnerLoopbackThis object indicates the switch of ONT NNI inner loopback.
inner loopback: From ONT NNI to OLT.
Options:
1. disable(1) - Disable the switch of ONT NNI inner loopback
2. enable(2) - Enable the switch of ONT NNI inner loopback
3. unknown(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.4.1.1 |
hwXponOntTdmLocalInnerLoopbackThis object indicates the switch of ONT TDM local inner loopback.
Local inner loopback: From ONT to ONT UNI.
Options:
1. disable(1) - Disable the switch of ONT TDM local inner loopback
2. enable(2) - Enable the switch of ONT TDM local inner loopback
3. unknown(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.4.1.2 |
hwXponOntTdmLocalOuterLoopbackThis object indicates the Switch of ONT TDM local outer loopback.
Local outer loopback: From ONT to OLT.
Options:
1. disable(1) - Disable the switch of ONT TDM local outer loopback
2. enable(2) - Enable the switch of ONT TDM local outer loopback
3. unknown(-1) - Indicates that the query fails or no information is detectedrw Enumeration .1.3.6.1.4.1.2011.6.128.1.1.5.4.1.3 |
hwXponDeviceLineTestObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.128.1.1.6 |
hwGponDeviceGemLineTestTableThis is the GEM port line test table.
This table is used to do line testing from OLT to ONT GEM port.
The index of this table is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. SEQUENCE OF HwGponDeviceGemLineTestEntry .1.3.6.1.4.1.2011.6.128.1.1.6.1 |
hwGponDeviceGemLineTestEntryThis is the GEM port line test table.
This table is used to do line testing from OLT to ONT GEM port.
The index of this entry is a combination of ifIndex,
hwGponDeviceOntIndex and hwGponDeviceGemIndexObjectIndex. HwGponDeviceGemLineTestEntry .1.3.6.1.4.1.2011.6.128.1.1.6.1.1 |
hwGponGemLineTestFrameLengthThis object indicates the frame length of GEM port line test. Range: 64-1518.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.1.1.1 |
hwGponGemLineTestFramesTxNumThis object indicates the number of GEM port line test frames sending. Range: 5-100.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.1.1.2 |
hwGponGemLineTestFramesRxNumThis object indicates the number of GEM port line test frames receiving. Range: 0-100.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.1.1.3 |
hwXponDeviceOntUniLineTestTableThis is the ONT UNI line test table. This table is used to do line testing from OLT to ONT UNI.
The index of this table is a combination of ifIndex, hwXponDeviceOntIndex,
hwXponOntUniPhyType and hwXponOntUniPhyIndex. SEQUENCE OF HwXponDeviceOntUniLineTestEntry .1.3.6.1.4.1.2011.6.128.1.1.6.2 |
hwXponDeviceOntUniLineTestEntryThis is the ONT UNI line test table. This table is used to do line testing from OLT to ONT UNI.
The index of this entry is a combination of ifIndex, hwXponDeviceOntIndex,
hwXponOntUniPhyType and hwXponOntUniPhyIndex. HwXponDeviceOntUniLineTestEntry .1.3.6.1.4.1.2011.6.128.1.1.6.2.1 |
hwXponOntUniLineTestFrameLengthThis object indicates the frame length of ONT UNI line test. Range: 64-1518.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.2.1.1 |
hwXponOntUniLineTestFramesTxNumThis object indicates the number of ONT UNI line test frames sending. Range: 5-100.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.2.1.2 |
hwXponOntUniLineTestSrvFlowIndexThis object indicates the service-port index of ONT UNI line test flow. Range: 1-32768.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.2.1.3 |
hwXponOntUniLineTestFramesRxNumThis object indicates the number of ONT UNI line test frames receiving. Range: 0-100.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.2.1.4 |
hwXponDeviceOntNniLineTestTableThis is the ONT NNI line test table.
This table is used to do line testing from OLT to ONT NNI.
The index of this table is a combination of ifIndex and hwXponDeviceOntIndex. SEQUENCE OF HwXponDeviceOntNniLineTestEntry .1.3.6.1.4.1.2011.6.128.1.1.6.3 |
hwXponDeviceOntNniLineTestEntryThis is the ONT NNI line test table.
This table is used to do line testing from OLT to ONT NNI.
The index of this entry is a combination of ifIndex and hwXponDeviceOntIndex. HwXponDeviceOntNniLineTestEntry .1.3.6.1.4.1.2011.6.128.1.1.6.3.1 |
hwXponOntNniLineTestFrameLengthThis object indicates the frame length of ONT NNI line test. Range: 64-1518.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.3.1.1 |
hwXponOntNniLineTestFramesTxNumThis object indicates the number of ONT NNI line test frames sending. Range: 5-100.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.3.1.2 |
hwXponOntNniLineTestFramesRxNumThis object indicates the number of ONT NNI line test frames receiving. Range: 0-100.ro Integer32 .1.3.6.1.4.1.2011.6.128.1.1.6.3.1.3 |
hwXponOntLoadFileTypeThis object indicates the ONT file type.
Options:
1. app(1) - Application load
2. cfg(2) - Configuration load
3. inValidFileType(255) - Indicates that the query fails or no information is detectedrw Enumeration .hwXponOntLoadCtrlTable.1 |
hwXponOntLoadServerIpAddrThis object indicates the server IP address.rw IpAddress .hwXponOntLoadCtrlTable.2 |
hwXponOntLoadProtocolThis object indicates the transfer protocol.
Options:
1. tftp(1) - TFTP
2. ftp(2) - FTP
3. sftp(3) - SFTP
4. inValidProtocol(255) - Indicates that the query fails or no information is detectedrw Enumeration .hwXponOntLoadCtrlTable.3 |
hwXponOntLoadFileNameThis object indicates the file name.rw OCTET STRING .hwXponOntLoadCtrlTable.4 |
hwXponOntLoadUserNameThis object indicates the user name.rw OCTET STRING .hwXponOntLoadCtrlTable.5 |
hwXponOntLoadPasswordThis object indicates the password.rw OCTET STRING .hwXponOntLoadCtrlTable.6 |
hwXponOntLoadAdminStatusThis object indicates the ONT loading flag.
Options:
1. start(1) - Indicates that the loading of ONT is started
2. stop(2) - Indicates that the loading of ONT is stopped
3. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .hwXponOntLoadCtrlTable.7 |
hwXponOntLoadXmlIndexF/S/P of ONT loading xml file.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading this
object will result in implementation-specific results.rw Integer32 .hwXponOntLoadCtrlTable.8 |
hwXponOntLoadXmlOntObjectIndexONT ID of loading xml file.
If the value of the ACCESS clause is 'write-only',
then the value of the MAX-ACCESS clause MUST be 'read-write',
and the DESCRIPTION clause SHALL note that reading
this object will result in implementation-specific results.rw Integer32 (-1 | 0..255) .hwXponOntLoadCtrlTable.9 |
hwXponOntLoadImageActiveModeActive mode of ont loading.
Options:
1. nextstartup(1) - Indicates that the ONT takes effect after next startup
2. immediate(2) - Indicates that the ONT takes effect immediately
3. graceful(3) - Indicates that the ONT takes effect gracefully
4. invalid(-1) - Indicates that the query fails or no information is detectedrw Enumeration .hwXponOntLoadCtrlTable.10 |
hwXponOntLoadXmlAES128KeyThis object indicates the AES-128 cryptographic key for the ont xml file.
This AES-128 key is 128bits(16 Bytes).rw OCTET STRING .hwXponOntLoadCtrlTable.11 |
hwXponOntLoadServerPortThis object indicates the port of server for ont loading.
The TFTP port default value is 69.
The FTP port default value is 21.
The SFTP port default value is 22.rw Integer32 ( 0..65535) .hwXponOntLoadCtrlTable.12 |