HUAWEI-LswINF-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HUAWEI-LswINF-MIB.
Main OID:
hwLswL2InfMib.1.3.6.1.4.1.2011.2.23.1.5
105
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
105 total| Object Name |
|---|
hwLswExtInterface OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.23.1.1 |
hwifXXTableExtended Huawei private interface information table. SEQUENCE OF HwIfXXEntry .1.3.6.1.4.1.2011.2.23.1.1.1 |
hwifXXEntryEntries of extended Huawei private interface information table. HwIfXXEntry .1.3.6.1.4.1.2011.2.23.1.1.1.1 |
hwifUnBoundPortWhether it is the unbound port. (true indicates that the port is
the main port of the aggregation or the port does not participate
in the aggregation.)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.1.1.1.1 |
hwifISPhyPortWhether it is a physical interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.1.1.1.2 |
hwifAggregatePortWhether it is the aggregated port. (if the port participates
in the aggregation, this value is true.)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.1.1.1.3 |
hwifMirrorPortWhether it is a mirror port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.1.1.1.4 |
hwifVLANTypeport vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.1.1.1.5 |
hwifMcastControlBroadcast storm suppression with the step length of 1,
ranging from 1 to 100 percent.
In some products the step is 5, ranging from 5 to 100.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.1.1.1.6 |
hwifFlowControlFlow control status.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.1.1.1.7 |
hwifSrcMacControlWhether to filter by source MAC address.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.1.1.1.8 |
hwifClearStatClear all port statistics. Read operation not supported.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.1.1.1.9 |
hwifXXBasePortIndexIndex number of the port and the first port index of the
device is 1.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.1.1.1.10 |
hwifXXDevPortIndexDevice index of the port.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.1.1.1.11 |
hwifPpsMcastControlThe broadcast suppression with pps(packet per second) type.
The max value is determined by the port type and product.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.12 |
hwifPpsBcastDisValControlControl the port's pps(packet per second) broadcast suppression.
When the port is enabled, its pps broadcast suppression value is the
global disperse value, and when disabled, it doesn't suppress broadcast.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.1.1.1.13 |
hwifUniSuppressionStepThe step of unicast suppression in ratio mode.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.14 |
hwifPpsUniSuppressionMaxThe max pps(packet per second) value of unicast suppression
in pps mode.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.15 |
hwifMulSuppressionStepThe step of multicast suppression in ratio mode.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.16 |
hwifPpsMulSuppressionMaxThe max pps(packet per second) value of multicast suppression
in pps mode.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.17 |
hwifUniSuppressionThe unicast suppression with the ranging from 1 to 100 percent
in ratio mode.
The step is determined by hwifUniSuppressionStep.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.18 |
hwifPpsUniSuppressionThe unicast suppression in pps(packet per second) mode.
The max value is determined by hwifPpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.19 |
hwifMulSuppressionThe multicast suppression with ranging from 1 to 100 percent
in ratio mode.
The step is determined by hwifMulSuppressionStep.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.20 |
hwifPpsMulSuppressionThe multicast suppression in pps(packet per second) mode.
The max pps value is determined by hwifPpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.21 |
hwifComboActivePortActive port on combo interface.rwobsolete Enumeration .1.3.6.1.4.1.2011.2.23.1.1.1.1.22 |
hwifBMbpsMulSuppressionMaxThe maximum value of the multicast suppression with bandwidth-based(Mbps)
that a port can be configured.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.23 |
hwifBMbpsMulSuppressionWith bandwidth-based multicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the multicast suppession with bandwidth-based(Mbps)
is the value of hwifBMbpsMulSuppressionMax in the entry.
The default value of hwifBMbpsMulSuppression is the value of
hwifBMbpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.24 |
hwifBKbpsMulSuppressionMaxThe maximum value of the multicast suppression with bandwidth-based(Kbps)
that a port can be configured.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.25 |
hwifBKbpsMulSuppressionStepThe step of multicast suppression with bandwidth-based(Kbps).ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.26 |
hwifBKbpsMulSuppressionWith bandwidth-based multicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the multicast suppession with bandwidth-based(Kbps)
is the value of hwifBKbpsMulSuppressionMax in the entry.
The value of hwifBKbpsMulSuppression must be multiple of the
value of hwifBKbpsMulSuppressionStep.
The default value of hwifBKbpsMulSuppression is the value of
hwifBKbpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.27 |
hwifUnknownPacketDropMulControl the port's unknown-multicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-multicast packets in inbound direction. When
outbound direction is enabled on this port, the port will
drop unknown-multicast packets in outbound direction. When
both directions are enabled on this port, the port will
drop unknown-multicast packets in both inbound and outbound
directions.rw DropDirection .1.3.6.1.4.1.2011.2.23.1.1.1.1.28 |
hwifUnknownPacketDropUniControl the port's unknown-unicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-unicast packets in inbound direction. When
outbound direction is enabled on this port, the port will
drop unknown-unicast packets in outbound direction. When
both directions are enabled on this port, the port will
drop unknown-unicast packets in both inbound and outbound
directions.rw DropDirection .1.3.6.1.4.1.2011.2.23.1.1.1.1.29 |
hwifBMbpsUniSuppressionMaxThe maximum value of the unicast suppression with bandwidth-based
(Mbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.30 |
hwifBMbpsUniSuppressionWith bandwidth-based Unicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the unicast suppession with bandwidth-based(Mbps)
is the value of hwifBMbpsUniSuppressionMax in the entry.
The default value of hwifBMbpsUniSuppression is the value of
hwifBMbpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.31 |
hwifBKbpsUniSuppressionMaxThe maximum value of the unicast suppression with bandwidth-based
(Kbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.32 |
hwifBKbpsUniSuppressionStepThe step of unicast suppression with bandwidth-based(Kbps).ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.33 |
hwifBKbpsUniSuppressionWith bandwidth-based unicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the unicast suppession with bandwidth-based(Kbps)
is the value of hwifBKbpsUniSuppressionMax in the entry.
The value of hwifBKbpsUniSuppression must be multiple of the
value of hwifBKbpsUniSuppressionStep.
The default value of hwifBKbpsUniSuppression is the value of
hwifBKbpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.34 |
hwifOutPayloadOctetsThe actual output octets of the interface.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.1.1.1.35 |
hwifInPayloadOctetsThe actual input octets of the interface.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.1.1.1.36 |
hwifInErrorPktsRateThe rate of inbound error packets on the interface.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.1.1.1.37 |
hwifInPktsThe number of packets received on the interface.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.1.1.1.38 |
hwifInNormalPktsThe number of normal packets received on the interface.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.1.1.1.39 |
hwifOutPktsThe number of packets sent on the interface.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.1.1.1.40 |
hwifAggregateTablePort aggregation information table. SEQUENCE OF HwIfAggregateEntry .1.3.6.1.4.1.2011.2.23.1.1.2 |
hwifAggregateEntryPort aggregation information table. HwIfAggregateEntry .1.3.6.1.4.1.2011.2.23.1.1.2.1 |
hwifAggregatePortIndexIndex number of the main aggregated port.ro InterfaceIndex .1.3.6.1.4.1.2011.2.23.1.1.2.1.1 |
hwifAggregatePortNameAggregation group name.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.1.2.1.2 |
hwifAggregatePortListPortsPortlist of a aggregating.rw PortList .1.3.6.1.4.1.2011.2.23.1.1.2.1.3 |
hwifAggregateModelLoad sharing mode for the port aggregation.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.1.2.1.4 |
hwifAggregateOperStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.1.2.1.5 |
hwifHybridPortTableHybrid-port configuration table. SEQUENCE OF HwifHybridPortEntry .1.3.6.1.4.1.2011.2.23.1.1.3 |
hwifHybridPortEntryHybrid-port configuration table. HwifHybridPortEntry .1.3.6.1.4.1.2011.2.23.1.1.3.1 |
hwifHybridPortIndexIndex number of Hybrid-port.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.1.3.1.1 |
hwifHybridTaggedVlanListLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each tagged VLAN
of the hybrid port is represented by a single bit within
the value of this object. If that bit has a value of '1'
then that VLAN is tagged in the set of VLANs; the VLAN
is not tagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.1.3.1.2 |
hwifHybridTaggedVlanListHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each tagged VLAN
of the hybrid port is represented by a single bit within
the value of this object. If that bit has a value of '1'
then that VLAN is tagged in the set of VLANs; the VLAN
is not tagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.1.3.1.3 |
hwifHybridUnTaggedVlanListLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each untagged
VLAN of the hybrid port is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is untagged in the set of VLANs; the
VLAN is not untagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.1.3.1.4 |
hwifHybridUnTaggedVlanListHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each untagged
VLAN of the hybrid port is represented by a single bit
within the value of this object. If that bit has a value of
'1' then that VLAN is untagged in the set of VLANs; the VLAN
is not untagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.1.3.1.5 |
hwifComboPortTableCombo-port table. SEQUENCE OF HwifComboPortEntry .1.3.6.1.4.1.2011.2.23.1.1.4 |
hwifComboPortEntryThe entry of hwifComboPortTable. HwifComboPortEntry .1.3.6.1.4.1.2011.2.23.1.1.4.1 |
hwifComboPortIndexThe combo-port interface index. Its value is the same as the value
of ifIndex in ifTable, but only includes indexes of the combo-port
interfaces.ro InterfaceIndex .1.3.6.1.4.1.2011.2.23.1.1.4.1.1 |
hwifComboPortCurActiveCurrent active interface of combo interfaces. The value 'fiber'
means the interface with fiber connector of the pair of combo-port
interfaces is active. The value 'copper' means the interface with
copper connector of the pair is active. The value 'na' means not
supported.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.1.4.1.2 |
hwLswL2InfMib MODULE-IDENTITY .1.3.6.1.4.1.2011.2.23.1.5 |
hwLswL2InfMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.23.1.5.1 |
hwSlotPortMaxMax ports of the slots.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.5.1.1 |
hwSwitchPortMaxMax ports that this switch includes.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.5.1.2 |
hwifVLANTrunkStatusTableGvrp attributes on the VlanTrunk port. SEQUENCE OF HwIfVLANTrunkStatusEntry .1.3.6.1.4.1.2011.2.23.1.5.1.3 |
hwifVLANTrunkStatusEntryGvrp attributes on the VlanTrunk port. HwIfVLANTrunkStatusEntry .1.3.6.1.4.1.2011.2.23.1.5.1.3.1 |
hwifVLANTrunkIndexIndex number of the VLANTrunk interface.ro InterfaceIndex .1.3.6.1.4.1.2011.2.23.1.5.1.3.1.1 |
hwifVLANTrunkGvrpRegistrationGVRP registration information
normal: This is the default configuration. Allow create, register
and unregister vlans dynamiclly at this port.
fixed: Aallow create and register vlan manually at this port.
Prevent from unregistering vlans or registering known
vlans of this port at another trunk port.
forbidden: Unregister all vlans but vlan 1, forbid to create or
register any other vlans at this port.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.3.1.2 |
hwifVLANTrunkPassListLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each actually
passed VLAN of the trunk port is represented by a single
bit within the value of this object. If that bit has a
value of '1' then that VLAN is actually passed in the set
of VLANs; the VLAN is not actually passed if its bit has
a value of '0'.ro OCTET STRING .1.3.6.1.4.1.2011.2.23.1.5.1.3.1.4 |
hwifVLANTrunkPassListHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each actually
passed VLAN of the trunk port is represented by a single
bit within the value of this object. If that bit has a
value of '1' then that VLAN is actually passed in the set
of VLANs; the VLAN is not actually passed if its bit has
a value of '0'.ro OCTET STRING .1.3.6.1.4.1.2011.2.23.1.5.1.3.1.5 |
hwifVLANTrunkAllowListLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each allowed
VLAN of the trunk port is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is allowed in the set of VLANs;
the VLAN is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.5.1.3.1.6 |
hwifVLANTrunkAllowListHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each allowed
VLAN of the trunk port is represented by a single bit within
the value of this object. If that bit has a value of '1'
then that VLAN is allowed in the set of VLANs; the VLAN is
not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.5.1.3.1.7 |
hwethernetTableEthernet port attribute table. SEQUENCE OF HwEthernetEntry .1.3.6.1.4.1.2011.2.23.1.5.1.4 |
hwethernetEntryEntries of Ethernet port attribute table HwEthernetEntry .1.3.6.1.4.1.2011.2.23.1.5.1.4.1 |
hwifEthernetDuplexEthernet interface mode.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.3 |
hwifEthernetMTUMTU on the Ethernet interface.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.4 |
hwifEthernetSpeedEthernet interface speed.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.5 |
hwifEthernetMdiType of the line connected to the port.
MDI-II (straight-through cable): 1
MDI-X (crossover cable): 2
MDI-AUTO (auto-sensing): 3rw Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.7 |
hwMaxMacLearnThe maximum number of MAC addresses that the port can learn.
The value -1 means that the number of Mac addresses that the port
can learn is unlimited.rw INTEGER(-1..2147483647) .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.8 |
hwifMacAddressLearnThis object indicates if the interface is allowed to learn mac address.
eanbled(1) means the interface can learn mac address, otherwise disabled(2)
can be set.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.9 |
hwifEthernetTestTest this interface.
The actual testing will be different according to products.
Read operation not supported.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.10 |
hwifMacAddrLearnModeStatus indicates mac address learn mode of the interface.
IVL(1) means independent VLAN learning.
SVL means shared VLAN learning.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.11 |
hwifEthernetFlowIntervalSet flow interval of the ethernet.
The NMS should set value to integer which is a multiple of 5.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.12 |
hwifEthernetIsolateIsolate group means that all ports in the same isolate group can not
send and receive packets each other.
Each octet within this value specifies a set of eight isolate groups,
with the first octet specifying isolate groups 1 through 8, the second
octet specifying isolate groups 9 through 16, etc. Within each octet,
the leftmost bit is the first bit.
the first bit represents the lowest numbered isolate group, and the
last bit represents the highest numbered isolate group. one port can
belong to more than one isolate group.
Thus, each isolate group is represented by a single bit within the
value of this object.
If that bit has a value of '1', then that isolate group includes this port;
the port is not included if its bit has a value of '0'.
for example, the first octet is '10000100' means that the port is
included in the isolate group 1 and isolate group 6.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.13 |
hwifVlanVPNStatusVlan VPN enable status.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.14 |
hwifVlanVPNUplinkStatusVlan VPN uplink status.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.15 |
hwifVlanVPNTPIDPort based Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100.
Please refer to hwVlanVPNTPIDMode to get more information.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.16 |
hwifIsolateGroupIDIsolate group identifier. Value zero means this interface does not
belong to any isolate group.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.17 |
hwifisUplinkPortEthernet uplink status, default value is 2.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.18 |
hwifEthernetAutoSpeedMaskThis object specifies which kinds of speed mode can be negotiated.
Each bit corresponds to a kind of speed mode.
If the value of a bit is '1', it means the corresponding speed mode
is negotiable on the port. Otherwise the negotiation for that
kind of speed mode is not supported on this port. If there are
several negotiable speed modes, all bits for them are '1'.
For example, if the speed mode 's10M' and 's1000M' can be negotiable,
the value of this object is 0xA0.ro SpeedModeFlag .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.19 |
hwifEthernetAutoSpeedThis object indicates which kinds of speed mode are negotiable
on this port.
Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding
bit of this object can be set to '1', indicating the corresponding
speed mode is negotiable.
For example, if the value of hwifEthernetAutoSpeedMask is 0xA0,
which indicates speed mode 's10M' and 's1000M' are negotiable,
the possible value of this object should be one of the four values
(0x00, 0x20, 0x80 and 0xA0).
If the value of hwifEthernetSpeed is not 'auto', the value of this
object is insignificant and should be ignored. The value length of
this object should be as long as that of hwifEthernetAutoSpeedMask.rw SpeedModeFlag .1.3.6.1.4.1.2011.2.23.1.5.1.4.1.20 |
hwIsolateGroupMaxMax isolate group that this device support, the value is zero
means that the device does not support isolate group.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.5.1.5 |
hwGlobalBroadcastMaxPpsThe global max packets per second. When it is set, the value of
BroadcastMaxPps in all ports will be changed to that setting.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.5.1.6 |
hwGlobalBroadcastMaxRatioThe global max-ratio of broadcast from 0 to 100 percent.
When it is set, the value of BroadcastMaxRatio in all ports
will be changed to that setting.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.5.1.7 |
hwBpduTunnelStatusBpdu tunnel enable status.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.8 |
hwVlanVPNTPIDModeVlan VPN TPID mode.
The value 'port-based' means VLAN VPN TPID value would be set based
on port via hwifVlanVPNTPID. In this situation, hwVlanVPNTPID is
meaningless and always return 0x8100.
The value 'global' means VLAN VPN TPID value should be set globally
via hwVlanVPNTPID. In this situation, hwifVlanVPNTPID in hwethernetTable
has the same value with hwVlanVPNTPID.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.5.1.9 |
hwVlanVPNTPIDGlobal Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.5.1.10 |
hwPortIsolateGroupTableIsolate Group attribute table. SEQUENCE OF HwPortIsolateGroupEntry .1.3.6.1.4.1.2011.2.23.1.5.1.11 |
hwPortIsolateGroupEntryThe entry of hwPortIsolateGroupTable. HwPortIsolateGroupEntry .1.3.6.1.4.1.2011.2.23.1.5.1.11.1 |
hwPortIsolateGroupIndexPort isolate group identifier.
The index of the hwPortIsolateGroupTable.
The value ranges from 1 to the limit of isolate group quantity. Integer32 .1.3.6.1.4.1.2011.2.23.1.5.1.11.1.1 |
hwPortIsolateUplinkIfIndexIndex number of the uplink interface.rw InterfaceIndex .1.3.6.1.4.1.2011.2.23.1.5.1.11.1.2 |
hwPortIsolateGroupRowStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.5.1.11.1.3 |
hwPortIsolateGroupDescriptionPort isolate group description, default value is zero-length string.rw DisplayString .1.3.6.1.4.1.2011.2.23.1.5.1.11.1.4 |
hwMaxMacLearnRangeThe maximum number of MAC address that the port supports.ro Integer32 .1.3.6.1.4.1.2011.2.23.1.5.1.12 |