HUAWEI-PROTECTION-MIB
AI MIB Summary
The HUAWEI-PROTECTION-MIB module enables SNMP-based monitoring and management of IPMB AIU protection groups and smart link monitor groups on Huawei network devices. It exposes specific status and performance metrics for link redundancy mechanisms, including protection group states, link failure detection, and switchover events.
This mib is used for defining the IPMB Aiu Proctect MIB objects of the protection group and smart link monitor group.
Main OID:
hwProtection.1.3.6.1.4.1.2011.6.50
110
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
110 total| Object Name |
|---|
hwProtectionThis mib is used for defining the IPMB Aiu Proctect MIB objects of the protection
group and smart link monitor group. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.50 |
hwProtectionTablePort protection table.This table is use to record the indices, workMode and other
infomation of the two ports which is in protection group. ifIndex is the index of
the working interface. For non-ETH board-level protection group, the port number
is 0; for the ETH board-level protection group, the port number is 127.
The index of this table is ifIndex. SEQUENCE OF HwProtectionEntry .1.3.6.1.4.1.2011.6.50.1 |
hwProtectionEntryPort protection table.This table is use to record the indices, workMode and other
infomation of the two ports which is in protection group. ifIndex is the index of
the working interface. For non-ETH board-level protection group, the port number
is 0; for the ETH board-level protection group, the port number is 127.
The index of this entry is ifIndex. HwProtectionEntry .1.3.6.1.4.1.2011.6.50.1.1 |
hwPgTypePort protection type.
Options:
1.e1(1) - indicates that the port protection type is e1
2.atmapm(2) - indicates that the port protection type is atmapm
3.atmaiu(3) - indicates that the port protection type is atmaiu
4.atmaic(4) - indicates that the port protection type is atmaic
5.atmmmxboard(5) - indicates that the port protection type is atmmmxboard
6.atmmmxport(6) - indicates that the port protection type is atmmmxport
7.eth(7) - indicates that the port protection type is ethrw Enumeration .1.3.6.1.4.1.2011.6.50.1.1.1 |
hwPgCurrentWorkEntityWhether the current board or port is the working or the protecting one.
Options:
1. work(1) - indicates that the port is working
2. protect(2) - indicates that the port is protectingro Enumeration .1.3.6.1.4.1.2011.6.50.1.1.2 |
hwPgProtectIfIndexIndex of the protecting board (the specified port number is 0).rw Integer32 .1.3.6.1.4.1.2011.6.50.1.1.3 |
hwPgMngtEnableEnables or disables the protection function.
Options:
1. enable(1) - indicates that the port protection function is enabled
2. disable(2) - indicates that the port protection function is disabledrw Enumeration .1.3.6.1.4.1.2011.6.50.1.1.4 |
hwPgMngtAdminStatusProtection operation.
Options:
1. switch(1) - Forced switchoverrw Enumeration .1.3.6.1.4.1.2011.6.50.1.1.5 |
hwPgWorkModeWorking mode of the protection group.
Options:
1.uniformRoute(1) - working mode of the protection group is uniform route
2.diverseRoute(2) - working mode of the protection group is diverse route
3.portState(3) - working mode of the protection group is port state
4.timedelay(4) - working mode of the protection group is delay detection
5.lacp(5) - working mode of the protection group is LACP
6.timebis(6) - working mode of the protection group is timebisrw Enumeration .1.3.6.1.4.1.2011.6.50.1.1.6 |
hwPgRowStatusProtection operation (4: Add; 6: Delete).
Options:
1. Add(4) - add protection group
2. Delete(6) - delete protection grouprw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.1.1.7 |
hwPgWeightProtection group weight.rw Integer32 .1.3.6.1.4.1.2011.6.50.1.1.8 |
hwPgStandbyOnTimeOpen time of standby port when checking port status of the standby board.
Unit: ms
The time equals to the returnd value multiply by 10.rw Integer32 .1.3.6.1.4.1.2011.6.50.1.1.9 |
hwPgHoldTimeThe delay-time of checking protection group.
Unit: ms
The time equals to the returnd value multiply by 10.rw Integer32 .1.3.6.1.4.1.2011.6.50.1.1.10 |
hwPgPriorityGroup-protect Priority.
Options:
1.low(1) - indicates that the priority of the protection group is low
2.middle(2) - indicates that the priority of the protection group is middle
3.high(3) - indicates that the priority of the protection group is highrw Enumeration .1.3.6.1.4.1.2011.6.50.1.1.11 |
hwProtectionAbilityTableThis table is no longer used.
The indexes of this table are hwFrameIndex and hwSlotIndex. SEQUENCE OF HwProtectionAbilityEntry .1.3.6.1.4.1.2011.6.50.2 |
hwProtectionAbilityEntryThis table is no longer used.
The indexes of this entry are hwFrameIndex and hwSlotIndex. HwProtectionAbilityEntry .1.3.6.1.4.1.2011.6.50.2.1 |
hwPgAbilityTypeProtection type.This object is no longer used.
Options:
1.e1(1) - indicates that the protection type is e1
2.atmapm(2) - indicates that the protection type is atmapm
3.atmaiu(3) - indicates that the protection type is atmaiu
4.atmaic(4) - indicates that the protection type is atmaic
5.atmmmxboard(5) - indicates that the protection type is atmmmxboard
6.atmmmxport(6) - indicates that the protection type is atmmmxport
7.eth(7) - indicates that the protection type is ethro Enumeration .1.3.6.1.4.1.2011.6.50.2.1.1 |
hwPgOtherFrameID of the shelf where protection group 2 is located.
This object is no longer used.ro Integer32 .1.3.6.1.4.1.2011.6.50.2.1.2 |
hwPgOtherSlotID of the slot where protection group 2 is located.
This object is no longer used.ro Integer32 .1.3.6.1.4.1.2011.6.50.2.1.3 |
hwGauPortProtectTableGau port config protective group.The index of this table is hwGauFirstPortIfIndex. SEQUENCE OF HwGauPortProtectEntry .1.3.6.1.4.1.2011.6.50.3 |
hwGauPortProtectEntryGau port config protective group.The index of this entry is hwGauFirstPortIfIndex. HwGauPortProtectEntry .1.3.6.1.4.1.2011.6.50.3.1 |
hwGauFirstPortIfIndexGau first port ifindex.rw Integer32 .1.3.6.1.4.1.2011.6.50.3.1.1 |
hwGauSecondPortIfIndexGau Second port ifindex.rw Integer32 .1.3.6.1.4.1.2011.6.50.3.1.2 |
hwGauPortrotectRowStatusConfig protective group rowstauts.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.3.1.3 |
hwGauPortCurrentActiveIfIndexCurrent active port ifindex.ro Integer32 .1.3.6.1.4.1.2011.6.50.3.1.4 |
hwPgCheckFrequencyprotection group check frequency.rw Integer32 .1.3.6.1.4.1.2011.6.50.4 |
hwPsGroupTableGroup table.
The objects in hwPsGroupTable are used for performing operations associated with the protection group.
The operations include creating and deleting a protection group, setting the protection group switchover
function, setting the switchover recovery waiting time, setting the description information about a protection group,
freezing and unfreezing a protection group, enabling and disabling a protection group, and querying the settings
of a protection group.
The index of this table is hwPgGroupId. SEQUENCE OF HwPsGroupEntry .1.3.6.1.4.1.2011.6.50.5 |
hwPsGroupEntryGroup table.
The objects in hwPsGroupTable are used for performing operations associated with the protection group.
The operations include creating and deleting a protection group, setting the protection group switchover
function, setting the switchover recovery waiting time, setting the description information about a protection group,
freezing and unfreezing a protection group, enabling and disabling a protection group, and querying the settings
of a protection group.
The index of this entry is hwPgGroupId. HwPsGroupEntry .1.3.6.1.4.1.2011.6.50.5.1 |
hwPgGroupIdProtection group ID. Integer32 .1.3.6.1.4.1.2011.6.50.5.1.1 |
hwPgGroupWorkModeGroup workmode.
Options:
1. timedelay(1) -ETH delay mode.
2. portstate(2) -ETH state mode.
3. smartlink(3) -SMART LINK active/standby mode.
4. unidirection(4) -STM-1 single-direction protection mode.
5. bidirection(5) -bidirection.
6. smartlinkbalance(6)-SMART LINK load sharing mode.
7. boardstate(7) -Board state mode.
8. dualparenting(8) -Dual-parenting mode.rw Enumeration .1.3.6.1.4.1.2011.6.50.5.1.2 |
hwPgGroupReversionTimeGroup reversion time.
Range: 1-1440
Default: 720
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.50.5.1.3 |
hwPgGroupReversionGroup reversion operation.
Options:
1. enable(1) -indicates that the protection group switchover recovery function is enabled
2. disable(2) -indicates that the protection group switchover recovery function is disabledrw Enumeration .1.3.6.1.4.1.2011.6.50.5.1.4 |
hwPgGroupFreezeGroup freeze operation.
Options:
1. freeze(1) -Frozen state
2. undofreeze(2) -Unfrozen staterw Enumeration .1.3.6.1.4.1.2011.6.50.5.1.5 |
hwPgGroupAdminGroup admin operation.
Options:
1. enable(1) -The protection group is enabled
2. disable(2) -The protection group is disabledrw Enumeration .1.3.6.1.4.1.2011.6.50.5.1.6 |
hwPgGroupDescGroup description.
All characters must between 0x20 and 0x7E, and can not be question mark.
Double quotation mark can not be the first or last character.
Blank can not follow double quotation mark.rw OCTET STRING .1.3.6.1.4.1.2011.6.50.5.1.7 |
hwPgGroupProtectTargetGroup protect target.
Options:
1. asmainboard(1) -Active main board and standby main board.
2. asmainboardport(2) -Port of active main board and standby main board.
3. asmainboardlag(3) -LAG of active main board and standby main board.
4. ethnniport(4) -Port of Ethernet nni.
5. ethnnilagmember(5) -LAG member of Ethernet nni.
6. eponuniport(6) -Port of EPON uni.
7. gponuniport(7) -Port of GPON uni.
8. stmnniport(8) -Port of STM-1 nni.
9. serviceprocessboard(9)-serviceprocessboard.
10.eponuniont(10) -Ont of EPON uni.
11.gponuniont(11) -Ont of GPON uni.rw Enumeration .1.3.6.1.4.1.2011.6.50.5.1.9 |
hwPgGroupRowStatusGroup rowstatus.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.5.1.10 |
hwPsMemberTableMember table.
The objects in hwPsMemberTable are used for performing operations associated with
the protection group member. The operations include adding and deleting a member,
forced or manual switchover, locking a member, and querying the information about
a member. This table is used to manage only the protection group member which is a port
or a board. To manage the protection group member which is an ONT, use hwPsOntMemberTable.
The indexes of this table are IfIndex and hwPgGroupId.
When IfIndex = -1, walk all member of hwPgGroupId.
Only ifIndex can be used to determine specific members. SEQUENCE OF HwPsMemberEntry .1.3.6.1.4.1.2011.6.50.6 |
hwPsMemberEntryMember table.
The objects in hwPsMemberTable are used for performing operations associated with
the protection group member. The operations include adding and deleting a member,
forced or manual switchover, locking a member, and querying the information about
a member. This table is used to manage only the protection group member which is a port
or a board. To manage the protection group member which is an ONT, use hwPsOntMemberTable.
The indexes of this entry are IfIndex and hwPgGroupId.
When IfIndex = -1, walk all member of hwPgGroupId.
Only ifIndex can be used to determine specific members. HwPsMemberEntry .1.3.6.1.4.1.2011.6.50.6.1 |
hwPgMemberRoleMember role.
Options:
1. work(1) -Working member
2. protect(2) -Protection memberrw Enumeration .1.3.6.1.4.1.2011.6.50.6.1.1 |
hwPgMemberOperMember operation.
Options:
1. manualswitch(1) -manual-switch
The manual switchover can be performed only when the protection group
is enabled, no member is locked, no forced switchover is performed,
and no member is faulty
2. undomanualswitch(2)-undo-manual-switch
3. forceswitch(3) -force-switch
The forced switchover can be performed only when the protection
group is enabled and no member is locked
When the command for this operation is issued, the switchover is performed
regardless of whether the specified target member is normal
4. undoforceswitch(4) -undo force-switch
5. lockout(5) -The protection group member is locked. After being locked, the protection group
member does not participate in protection group switchover
6. unlockout(6) -The protection group member is unlocked. After being unlocked, the protection
group member continues to participate in protection group switchover
7. exerciseswitch(7)
The exercise switchover can be performed only when the protection group
is enabled, no member is locked, no other type switchover is performed,
and no member is faulty
When the command for this operation is issued, no actual switchover is performed,
only members's status is changed
8. undoexerciseswitch(8)-undo exercise-switch
Reading this object will result in implementation-specific results.rw Enumeration .1.3.6.1.4.1.2011.6.50.6.1.2 |
hwPgMemberStatusMember status.
Options:
1. null(1) -Null operation
2. manualswitchsrc(2) -Source member of the manual switchover
3. manualswitchdst(3) -Target member of the manual switchover
4. forceswitchsrc(4) -Source member of the forced switchover
5. forceswitchdst(5) -Target member of the forced switchover
6. autoswitchsrc(6) -Source member of the automatic switchover
7. autoswitchdst(7) -Target member of the automatic switchover
8. lockout(8) -Locked
9. exerciseswitch(9) -Exercise switchedro Enumeration .1.3.6.1.4.1.2011.6.50.6.1.3 |
hwPgDstMemberTarget member ifindex.Reading this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.50.6.1.4 |
hwPgMemberRunningStateMember status.
Options:
1. active(1) -State of the member that carries the service
2. standby(2) -State of the member that does not carry the service
3. adding(3) -Adding
4. deleting(4) -Deleting
5. switching(5)-Switchingro Enumeration .1.3.6.1.4.1.2011.6.50.6.1.5 |
hwPgMemberPeerMemberPeer member ifindex.ro Integer32 .1.3.6.1.4.1.2011.6.50.6.1.6 |
hwPgMemberRowStatusMember rowstatus.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.6.1.8 |
hwPsGroupExtTableProtect extended Group table.The index of this table is hwPgGroupId.
This table is used to config private parameter of protection group. SEQUENCE OF HwPsGroupExtEntry .1.3.6.1.4.1.2011.6.50.7 |
hwPsGroupExtEntryProtect extended Group table.The index of this entry is hwPgGroupId.
This table is used to config private parameter of protection group. HwPsGroupExtEntry .1.3.6.1.4.1.2011.6.50.7.1 |
hwPsGroupFlushSendCtrlVlanControl VLAN ID of flush packet which to send.
-1 means set VLAN ID to useless value.rw Integer32(-1 | 1..4093) .1.3.6.1.4.1.2011.6.50.7.1.1 |
hwPsGroupFlushSendPasswordPassword of flush packet which to send.
Blank string means set password to useless value.
All characters must between 0x20 and 0x7E, and can not be question mark.
Double quotation mark can not be the first or last character.
Blank can not follow double quotation mark.rw OCTET STRING .1.3.6.1.4.1.2011.6.50.7.1.2 |
hwPsGroupLoadBalanceStateLoad balance state of smart link protect group.
Options:
1. allonwork(1) - Load balance state of smart link protect group is allonwork
2. allonprotect(2) - Load balance state of smart link protect group is allonprotect
3. loadbalance(3) - Load balance state of smart link protect group is loadbalance
4. invalid(-1) - Load balance state of smart link protect group is invalidro Enumeration .1.3.6.1.4.1.2011.6.50.7.1.3 |
hwPsGroupPppoeSingleMacgroup pppoe single-mac operation.
Options:
1.bind(1) - The operation is bound
2.unbind(2) - The operation is unbound
3.invalid(-1) - The operation is invalidrw Enumeration .1.3.6.1.4.1.2011.6.50.7.1.4 |
hwPsGroupAntiJitterTimeSet anti-jitter time gpon or epon protect-group.
The allowable value is from 1 to 1440 seconds.
The invalid value is -1.
Defaut value is 720 seconds.rw Integer32 (1..1440 | -1) .1.3.6.1.4.1.2011.6.50.7.1.5 |
hwPsGroupLoadBalanceTableProtect group load balance configuration table.
The indexes of this table are hwPgGroupId and hwPsGroupLoadBalanceInstance. SEQUENCE OF HwPsGroupLoadBalanceEntry .1.3.6.1.4.1.2011.6.50.8 |
hwPsGroupLoadBalanceEntryProtect group load balance configuration table.
The indexes of this entry are hwPgGroupId and hwPsGroupLoadBalanceInstance. HwPsGroupLoadBalanceEntry .1.3.6.1.4.1.2011.6.50.8.1 |
hwPsGroupLoadBalanceInstanceInstance ID.
From 0 to the max instance ID.
The max intance ID is different for products. Integer32 .1.3.6.1.4.1.2011.6.50.8.1.1 |
hwPsGroupLoadBalanceRoleLoad balance configuration of instance in each protect group.
Default value is on-work.
Options:
1. onwork(1) -forward through work member on load-balance state
2. onprotect(2) -forward through protect member on load-balance state
If not on load-balance state, all instance forward through active member.rw Enumeration .1.3.6.1.4.1.2011.6.50.8.1.2 |
hwSmartLinkFlushRecvPortTableDescribes the configuration information for receiving the flush packet.
The index of this table is ifIndex. SEQUENCE OF HwSmartLinkFlushRecvPortEntry .1.3.6.1.4.1.2011.6.50.9 |
hwSmartLinkFlushRecvPortEntryDescribes the configuration information for receiving the flush packet.
The index of this entry is ifIndex. HwSmartLinkFlushRecvPortEntry .1.3.6.1.4.1.2011.6.50.9.1 |
hwSmartLinkFlushRecvCtrlVlanIndicates the control VLAN of the received flush packet.
Range: -1, 1-4093
-1 indicates deleting the control VLAN.rw Integer32(-1 | 1..4093) .1.3.6.1.4.1.2011.6.50.9.1.1 |
hwSmartLinkFlushRecvPasswordIndicates the authentication password of the received flush packet.
When the value of this leaf is a null character string, it indicates that no password authentication is required.
All characters in the password must be ASCII codes from 0x20 to 0x7E.rw OCTET STRING .1.3.6.1.4.1.2011.6.50.9.1.2 |
hwSmartLinkFlushRecvStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.10 |
hwSmartLinkFlushRecvLastIfIndexIndicates the index of the last port that receives the flush packet. Its calculation is the same as that of ifIndex.
-1 indicates invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.50.10.1 |
hwSmartLinkFlushRecvLastTimeIndicates the last time when the flush packet is received.
The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes, the
first and second bytes indicates the year, the third byte indicates the month, the fourth byte
indicates the day, the fifth byte indicates the hour, the sixth byte indicates the minute, the
seventh byte indicates 1/10 second and is fixedly filled with 0, and the eighth, ninth, and tenth
bytes indicate the time zone.
For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA 0x02 0x08 0x0A 0x0B
0x26 0x00 0x2B 0x08 0x00.
Because the time range that can be identified by the device is from 1970-01-01 00:00 to 2099-12-31 23:59,
the time set for this leaf must within this time range.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.10.2 |
hwSmartLinkFlushRecvLastSrcMacAddrIndicates the last source MAC address that receives the flush packet.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.10.3 |
hwSmartLinkFlushRecvLastCtrlVlanIndicates the last control VLAN that receives the flush packet.
Range: -1, 1-4093
-1 indicates invalid value.ro Integer32 .1.3.6.1.4.1.2011.6.50.10.4 |
hwMonitorLinkGroupTableUsed for configuring a monitor link group.
The index of this table is hwMonitorLinkGroupId. SEQUENCE OF HwMonitorLinkGroupEntry .1.3.6.1.4.1.2011.6.50.11 |
hwMonitorLinkGroupEntryUsed for configuring a monitor link group.
The index of this entry is hwMonitorLinkGroupId. HwMonitorLinkGroupEntry .1.3.6.1.4.1.2011.6.50.11.1 |
hwMonitorLinkGroupIdIndicates the index of the monitored group. Integer32 .1.3.6.1.4.1.2011.6.50.11.1.1 |
hwMonitorLinkGroupRecoverTimeIndicates the recovery time of the monitored group.
Range: 3-60
Default: 3
Unit: secondrw Integer32 .1.3.6.1.4.1.2011.6.50.11.1.2 |
hwMonitorLinkGroupStateIndicates the status of the monitored group.
Options:
1. idle(1) -the status of a monitored group is idle
2. normal(2) -the status of a monitored group is normal
3. failed(3) -the status of a monitored group is failed
4. recovering(4) -the status of a monitored group is recoveringro Enumeration .1.3.6.1.4.1.2011.6.50.11.1.3 |
hwMonitorLinkGroupRowStatusIndicates the row status, used for creating or deleting a monitored group. createAndGo(4)
and destroy(6) are supported. During the query operation, active(1) is always returned for
this leaf.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create a monitored group
3. destroy(6) -delete a monitored group
To create a monitored group, set hwMonitorLinkGroupRowStatus to createAndGo(4) and perform
the set operation. hwMonitorLinkGroupRecoverTime is optional.
To delete a monitored group, set hwMonitorLinkGroupRowStatus to destroy(6) and perform the
set operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.11.1.10 |
hwMonitorLinkUpLinkTableUsed for configuring a monitor up link port.
The index of this table is hwMonitorLinkUpLinkIfIndex. SEQUENCE OF HwMonitorLinkUpLinkEntry .1.3.6.1.4.1.2011.6.50.12 |
hwMonitorLinkUpLinkEntryUsed for configuring a monitor up link port.
The index of this entry is hwMonitorLinkUpLinkIfIndex. HwMonitorLinkUpLinkEntry .1.3.6.1.4.1.2011.6.50.12.1 |
hwMonitorLinkUpLinkIfIndexIndicates the index of the upstream port of the monitored group. Its calculation
is the same as that of ifIndex.
When the value of this leaf is -1, it indicates that no upstream port exists.rw Integer32 .1.3.6.1.4.1.2011.6.50.12.1.1 |
hwMonitorLinkUpLinkStatusIndicates the status of the upstream port of the monitored group.
Options:
1. linkUp(1) -the status of the upstream port of the monitored group is link up
2. linkDown(2) -the status of the upstream port of the monitored group is link downro Enumeration .1.3.6.1.4.1.2011.6.50.12.1.2 |
hwMonitorLinkUpLinkUpTimeIndicates the last time when the upstream port of the monitored groups is up.
The value format of this leaf is an 8-byte hexadecimal number. Among the eight
bytes, the first and second bytes indicates the year, the third byte indicates
the month, the fourth byte indicates the day, the fifth byte indicates the hour,
the sixth byte indicates the minute, the seventh byte indicates 1/10 second and
is fixedly filled with 0, and the eighth, ninth, and tenth bytes indicate the
time zone.
For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA
0x02 0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00.
Because the time range that can be identified by the device is from 1970-01-01
00:00 to 2099-12-31 23:59, the time set for this leaf must within this time range.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.12.1.3 |
hwMonitorLinkUpLinkDownTimeIndicates the last time when the upstream port of the monitored groups is down.
The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes,
the first and second bytes indicates the year, the third byte indicates the month,
the fourth byte indicates the day, the fifth byte indicates the hour, the sixth byte
indicates the minute, the seventh byte indicates 1/10 second and is fixedly filled
with 0, and the eighth, ninth, and tenth bytes indicate the time zone.
For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA 0x02
0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00.
Because the time range that can be identified by the device is from 1970-01-01 00:00
to 2099-12-31 23:59, the time set for this leaf must within this time range.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.12.1.4 |
hwMonitorLinkDownLinkTableUsed for configuring a monitor down link port.
The indexes of this table are hwMonitorLinkGroupId and hwMonitorLinkDownLinkIfIndex. SEQUENCE OF HwMonitorLinkDownLinkEntry .1.3.6.1.4.1.2011.6.50.13 |
hwMonitorLinkDownLinkEntryUsed for configuring a monitor down link port.
The indexes of this entry are hwMonitorLinkGroupId and hwMonitorLinkDownLinkIfIndex. HwMonitorLinkDownLinkEntry .1.3.6.1.4.1.2011.6.50.13.1 |
hwMonitorLinkDownLinkIdIndicates the index of the downlink of the monitored group.
Range: 0-15 Integer32 .1.3.6.1.4.1.2011.6.50.13.1.1 |
hwMonitorLinkDownLinkIfIndexIndicates the index of the downstream port of the monitored group.rw Integer32 .1.3.6.1.4.1.2011.6.50.13.1.2 |
hwMonitorLinkDownLinkStatusIndicates the status of the downstream port of the monitored group.
Options:
1. linkUp(1) -the status of the downstream port of the monitored group is link up
2. linkDown(2) -the status of the downstream port of the monitored group is link downro Enumeration .1.3.6.1.4.1.2011.6.50.13.1.3 |
hwMonitorLinkDownLinkUpTimeIndicates the last time when the downstream port of the monitored groups is up.
The value format of this leaf is an 8-byte hexadecimal number. Among the eight
bytes, the first and second bytes indicates the year, the third byte indicates
the month, the fourth byte indicates the day, the fifth byte indicates the hour,
the sixth byte indicates the minute, the seventh byte indicates 1/10 second and
is fixedly filled with 0, and the eighth, ninth, and tenth bytes indicate the
time zone.
For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA
0x02 0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00.
Because the time range that can be identified by the device is from 1970-01-01
00:00 to 2099-12-31 23:59, the time set for this leaf must within this time range.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.13.1.4 |
hwMonitorLinkDownLinkDownTimeIndicates the last time when the downstream port of the monitored groups is down.
The value format of this leaf is an 8-byte hexadecimal number. Among the eight bytes,
the first and second bytes indicates the year, the third byte indicates the month,
the fourth byte indicates the day, the fifth byte indicates the hour, the sixth byte
indicates the minute, the seventh byte indicates 1/10 second and is fixedly filled
with 0, and the eighth, ninth, and tenth bytes indicate the time zone.
For example, if the time is 2010-2-8, 10:11:38 in GMT+ 8, the value is 0x07 0xDA 0x02
0x08 0x0A 0x0B 0x26 0x00 0x2B 0x08 0x00.
Because the time range that can be identified by the device is from 1970-01-01 00:00
to 2099-12-31 23:59, the time set for this leaf must within this time range.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.13.1.5 |
hwMonitorLinkDownRowStatusIndicates the row status, used for creating or deleting a monitored downlink. createAndGo(4)
and destroy(6) are supported. During the query operation, active(1) is always returned for
this leaf.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -create a monitored downlink
3. destroy(6) -delete a monitored downlink
To create a monitored downlink, specify hwMonitorLinkDownLinkIfIndex, set hwMonitorLinkDownRowStatus
to createAndGo(4) and perform the set operation.
To delete a monitored downlink, set hwMonitorLinkGroupRowStatus to destroy(6) and perform the
set operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.13.1.10 |
hwPsOntMemberTableMember table for ONT.
The objects in hwPsOntMemberTable are used for performing operations associated with
the ONT protection group member. The operations include adding and deleting a member,
forced or manual switchover, locking a member, and querying the information about
a member. This table determines a protection group member by the ifIndex and hwPgOntId
of the member. The indexes of this table are IfIndex, hwOntId and hwPgGroupId.
When IfIndex = -1, hwOntId = -1, walk all member of hwPgGroupId. SEQUENCE OF HwPsOntMemberEntry .1.3.6.1.4.1.2011.6.50.14 |
hwPsOntMemberEntryMember table for ONT.
The objects in hwPsOntMemberTable are used for performing operations associated with
the ONT protection group member. The operations include adding and deleting a member,
forced or manual switchover, locking a member, and querying the information about
a member. This table determines a protection group member by the ifIndex and hwPgOntId
of the member. The indexes of this entry are IfIndex, hwOntId and hwPgGroupId.
When IfIndex = -1, hwOntId = -1, walk all member of hwPgGroupId. HwPsOntMemberEntry .1.3.6.1.4.1.2011.6.50.14.1 |
hwPgOntIdOnt ID. Integer32 .1.3.6.1.4.1.2011.6.50.14.1.1 |
hwPgOntMemberRoleMember role.
Options:
1. work(1) -Working member
2. protect(2) -Protection memberrw Enumeration .1.3.6.1.4.1.2011.6.50.14.1.2 |
hwPgOntMemberOperMember operation:
Options:
1. manualswitch(1) -manual-switch
The manual switchover can be performed only when the protection group is
enabled, no member is locked, no forced switchover is performed, and no member
is faulty
2. undomanualswitch(2)-undo-manual-switch
3. forceswitch(3) -force-switch
The forced switchover can be performed only when the protection
group is enabled and no member is locked.
When the command for this operation is issued, the switchover is performed
whenever the specified target member is normal
4. undoforceswitch(4) -undo force-switch
5. lockout(5) -The protection group member is locked. After being locked, the protection
group member does not participate in protection group switchover
6. unlockout(6) -The protection group member is unlocked. After being unlocked, the protection
group member continues to participate in protection group switchover
7. exerciseswitch(7)
The exercise switchover can be performed only when the protection group
is enabled, no member is locked, no other type switchover is performed,
and no member is faulty
When the command for this operation is issued, no actual switchover is performed,
only members's status is changed
8. undoexerciseswitch(8)-undo exercise-switch
Reading this object will result in implementation-specific results.rw Enumeration .1.3.6.1.4.1.2011.6.50.14.1.3 |
hwPgOntMemberStatusMember status.
Options:
1. null(1) -Null operation
2. manualswitchsrc(2) -Source member of the manual switchover
3. manualswitchdst(3) -Target member of the manual switchover
4. forceswitchsrc(4) -Source member of the forced switchover
5. forceswitchdst(5) -Target member of the forced switchover
6. autoswitchsrc(6) -Source member of the automatic switchover
7. autoswitchdst(7) -Target member of the automatic switchover
8. lockout(8) -Locked
9. exerciseswitch(9) -Exercise switchedro Enumeration .1.3.6.1.4.1.2011.6.50.14.1.4 |
hwPgOntDstMemberPortTarget member ifindex. Reading this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.50.14.1.5 |
hwPgOntDstMemberOntTarget member ontId. Reading this object will result in implementation-specific results.rw Integer32 .1.3.6.1.4.1.2011.6.50.14.1.6 |
hwPgOntMemberRunningStateMember status.
Options:
1. active(1) -State of the member that carries the service
2. standby(2) -State of the member that does not carry the service
3. adding(3) -Adding
4. deleting(4) -Deleting
5. switching(5)-Switchingro Enumeration .1.3.6.1.4.1.2011.6.50.14.1.7 |
hwPgOntMemberPeerMemberPortPeer member ifindex.ro Integer32 .1.3.6.1.4.1.2011.6.50.14.1.8 |
hwPgOntMemberPeerMemberOntPeer member ontId.ro Integer32 .1.3.6.1.4.1.2011.6.50.14.1.9 |
hwPgOntMemberRowStatusMember rowstatus.
Options:
1. createAndGo(4) -create a new instance of a conceptual row
2. destroy(6) -delete the instances associated with an existing conceptual rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.50.14.1.11 |
hwProtectionTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.15 |
hwProtectionTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.16 |
hwProtectionCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.16.1 |
hwProtectionCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.16.1.0 |
hwProtectionSwitchTrapThe agent generates this trap when a protect group switchs over. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.50.16.1.0.1 |
hwProtectionAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.16.2 |
hwProtectionAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.16.2.0 |
hwProtectionSwitchAlarmTrapThe agent generates this trap when a protect group switchs over. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.50.16.2.0.1 |
hwSmartLinkTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.17 |
hwSmartLinkCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.17.1 |
hwSmartLinkCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.50.17.1.0 |
hwMoniterGroupStateChangeTrapThis trap is generated when the state of moniter link group changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.50.17.1.0.1 |