HUAWEI-DEVICE-MIB
AI MIB Summary
The HUAWEI-DEVICE-MIB provides comprehensive monitoring and management of Huawei network device hardware and system resources, including CPU utilization, memory usage, temperature sensors, fan status, and power supply states. It enables the retrieval of interface statistics, system uptime, and device identity information via SNMP for operational visibility and fault detection across Huawei routing and switching platforms.
huawei device mib.
Main OID:
hwDev.1.3.6.1.4.1.2011.6.3
159
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
159 total| Object Name |
|---|
hwDevhuawei device mib. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.3 |
hwSystemPara OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.1 |
hwSysIpAddrIP address of the system,IP address of the
net port used for device maintenance.It'd
better not to modify this address when
out-band NMS is used.rw IpAddress .1.3.6.1.4.1.2011.6.3.1.1 |
hwSysIpMaskIP address mask of the system. IP address of the
net port used for device maintenance. It'd be better not to IP address mask
together with address mask. It will take no effect to separately
configure IP address or address mask. It'd
when out-band NMS is used.rw IpAddress .1.3.6.1.4.1.2011.6.3.1.2 |
hwSysVersionThe System Version is consistent with the specification of HUAWEI product.
For example, MD5500 V100R001M30B01PXXXX.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.1.3 |
hwSysTimeThe current date and time of the system.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.1.4 |
hwNmsParaTable SEQUENCE OF HwNmsParaEntry .1.3.6.1.4.1.2011.6.3.2 |
hwNmsParaEntryNMS parameters configuration table entity. HwNmsParaEntry .1.3.6.1.4.1.2011.6.3.2.1 |
hwNmsIndexIndex(1..32),at most supports 32 NMSs,exclusively identifies a NMS.ro Integer32 .1.3.6.1.4.1.2011.6.3.2.1.1 |
hwNmsNameName of the NMS, which des not have to be
consistent with that of the NMS workstation.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.2.1.2 |
hwNmsIpIP address of the NMS workstation that can be outband
or inband address.rw IpAddress .1.3.6.1.4.1.2011.6.3.2.1.3 |
hwNmsMaskIP address mask of the NMS workstation.rwdeprecated IpAddress .1.3.6.1.4.1.2011.6.3.2.1.4 |
hwNmsMaintainModeMaintenance mode of NMS workstation,if the IP address
of the NMS station is in-band, the mode must also be in-band.rwdeprecated Enumeration .1.3.6.1.4.1.2011.6.3.2.1.5 |
hwNmsGetCommunityCommunity authentication name used for SNMP
protocol GET operation, default value: public.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.2.1.6 |
hwNmsSetCommunityCommunity authentication name used for SNMP
protocol SET operation, default value: private.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.2.1.7 |
hwNmsSnmpPortSnmp communication port of NMS workstation,default value:161.rwdeprecated Integer32 .1.3.6.1.4.1.2011.6.3.2.1.8 |
hwNmsTrapPortTrap receive Port of NMS workstation, default value:162.rwdeprecated Integer32 .1.3.6.1.4.1.2011.6.3.2.1.9 |
hwNmsClassClass of NMS station,default value is 3.rwdeprecated Enumeration .1.3.6.1.4.1.2011.6.3.2.1.10 |
hwNmsStatusOperation status of NMS station,the NMS station
can be added,deleted and modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.2.1.11 |
hwSlotConf OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.3 |
hwFrameTableFrame description table that describes basic information of a frame.
It includes the frame type, the number of slots in the frame, etc.
The number of slots vary with the type of the frame where it is located.
For example,, there are has 16 slots in MA5100 while 4 ones in MA5103.
This table is also adopted for the case-shaped device with Agent
(For example, the MA5105).
There is no frame in this his kind of device. Thus, the device can be
put on the rack with other ones during implementation.
Its frame index is specified as 0. The frame type is imported from the
relevant definition of the HW-TC table. SEQUENCE OF HwFrameEntry .1.3.6.1.4.1.2011.6.3.3.1 |
hwFrameEntryFrame description table entity. HwFrameEntry .1.3.6.1.4.1.2011.6.3.3.1.1 |
hwFrameIndexFrame Index,the number of the frame in the device.
This table is also adopted by the case-shaped device with Agent
(For example, the MA5105).
There is no frame in this kind of device. Thus it is placed on
the rack with other devices During implementation. The frame index
is specified as 0.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.1.1.1 |
hwFrameTypeFrame type,one kind of the frame types defined in HW-TC table.
According to the private MIB standard of the company, the product
must support read-only mode. In other words, you can query the
frame type the NMS.
You can choose for various broadband product to support read-write
mode for the dynamic control of frame type.rw HWFrameType (HUAWEI-TC-MIB) .1.3.6.1.4.1.2011.6.3.3.1.1.2 |
hwFrameDescFrame description, the maximum length of the character
string is 64. This table is used to describe some extra
information. For example, to facilitate management, use
it to describe the frame that
is located in XX frame XX apparatus room.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.3.1.1.3 |
hwSlotsSlot number of the frame, refers to the physical
slot number of the frame, which depends on the
frame type and has nothing to do with the number of boards
placed in the slots, whose number varies with the frame type.
For example, there are 16 slots in MA5100 while 4 lots in MA5103.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.1.1.4 |
hwFrameOperStatusFrame operation status. This variable is used to indicate whether the
frame works in a normal status.ro Enumeration .1.3.6.1.4.1.2011.6.3.3.1.1.5 |
hwFrameAdminStatusFrame administration status.
It only describes the statuses in common use, includingrw Enumeration .1.3.6.1.4.1.2011.6.3.3.1.1.6 |
hwFrameRowStatusRow status of the frame:mainly to support the
offline configuration of addition and deletion.
You can choose for various broadband products to support this
function.Row status is used to manage the creation or deletion
of the concept rows.The following shows six statuses.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.3.1.1.7 |
hwSlotTableSlot description table, which describes detailed information
of all boards in each slot which is on the frame, including the number of subslots,
the status of the board, the software of the board, the hardware version No.,
the working mode of the board, etc.
This table must be implemented. SEQUENCE OF HwSlotEntry .1.3.6.1.4.1.2011.6.3.3.2 |
hwSlotEntrySlot description table entity. HwSlotEntry .1.3.6.1.4.1.2011.6.3.3.2.1 |
hwSlotIndexSlot index that identifies the physical position of a slot.
The case-shaped device is treated as the one with only one slot whose index is always set as 0.
If there are ports in the frame, all the ports on the frame must be virtualized as
a fixed slot index (equal to the virtual slots which is the max slot index for the frame plus
1.) Their slot index is also fixedly set as 0.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.2.1.1 |
hwSlotTypeBoard type. The board type defined in HW-TC table is recommended.
According to the private MIB standard of the company, all the products must support the read-only mode. In other words, you can query the slot type through the NMS. You can choose for various broadband products to support the read-write mode for the dynamic control of slot type.rw HWPCBType (HUAWEI-TC-MIB) .1.3.6.1.4.1.2011.6.3.3.2.1.2 |
hwSlotDescSlot information description, used to describe extra information of the board.
For example, it can be adopted for a user access device to describe the information of a
user group connected to the slot.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.3.2.1.3 |
hwSlotPcbVersionThe PCB version information of the slot.
It has been discarded in the fixed net MIB. The information of PCB version and
other versions are described in the hwSlotVersion.rodeprecated OCTET STRING .1.3.6.1.4.1.2011.6.3.3.2.1.4 |
hwSlotVersionBoard version information.
Refer to the technical specifications of Huawei Technologies
Co., Ltd. Use the new-line character \n (ACSII 0x0A) to space
various version information.If there is no corresponding
version, the new-line character shall also be inserted to
remain the order.
Detailed order information:
Hardware PCB version \n
Software version \n
Logic version \n
DSP version \n
Standby CPU software version \n
Chip version \n
Other software version of the chip with a software \n
Other version information \nro OCTET STRING .1.3.6.1.4.1.2011.6.3.3.2.1.5 |
hwSlotWorkModeBoard working mode that describes whether the board is
working in main state or in standby state.ro Enumeration .1.3.6.1.4.1.2011.6.3.3.2.1.6 |
hwSubSlotsThe number of the subslots.
The subslot is used to plug the subboard in the board.
The number subslots can be determined when the board's been made,
whether the subboard has been inserted in the subslot.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.2.1.7 |
hwSlotOperStatusOperation status of the board.ro Enumeration .1.3.6.1.4.1.2011.6.3.3.2.1.8 |
hwSlotAdminStatusAdministration status of the board.rw Enumeration .1.3.6.1.4.1.2011.6.3.3.2.1.9 |
hwSlotRowStatusRow status:mainly to support the offline
configuration of board addition and deletion.
Various broadband products can be determined whether to support this function.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.3.2.1.10 |
hwSlotPhySerialNumThe vendor-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).ro DisplayString .1.3.6.1.4.1.2011.6.3.3.2.1.11 |
hwSubslotTableSubslot description table that describes detailed information of
each subslot attached to the board. SEQUENCE OF HwSubslotEntry .1.3.6.1.4.1.2011.6.3.3.3 |
hwSubslotEntrySubslot description table entity. HwSubslotEntry .1.3.6.1.4.1.2011.6.3.3.3.1 |
hwSubslotIndexSubslot Index. The present subslot index is determined by its
physical position in the board.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.3.1.1 |
hwSubslotTypeSubboard type in the subslot,refer to HW-TC table.
According to the private MIB standard of the company, the product
must support read-only mode. In other words, you can query the subboard
type through the NMS. You can choose for various broadband product to
support read-write mode for the dynamic control of frame type.rw HWSubPCBType (HUAWEI-TC-MIB) .1.3.6.1.4.1.2011.6.3.3.3.1.2 |
hwSubslotPortsThe number of physical ports owned by the subboard in the subslot.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.3.1.3 |
hwSubslotOperStatusOperation status of the subboard in the subslot.ro Enumeration .1.3.6.1.4.1.2011.6.3.3.3.1.5 |
hwSubslotAdminStatusAdministration status of the subboard in the subslot.
The following only describes some statuses in common use.
If there are some other statuses, just extend them.
delete(6) - discard this node through hwSubSlotRowStatus.rw Enumeration .1.3.6.1.4.1.2011.6.3.3.3.1.7 |
hwSubslotVersionSubboard version information.
Refer to the technical specifications of Huawei Technologies Co., Ltd.
Use the new-line character \n (ACSII 0x0A) to space various
version information.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.3.3.1.8 |
hwSubSlotDescSubboard description.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.3.3.1.9 |
hwSubslotRowStatusRow status:mainly to support the offline configuration
of subboard addition and deletion.Each product can
determine whether to offer this kind of function.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.3.3.1.10 |
hwPortTablePort configuration table that describes the detailed
information of physical ports in the board, including the type,
status and rate of the port.This table must be implemented. SEQUENCE OF HwPortEntry .1.3.6.1.4.1.2011.6.3.3.4 |
hwPortEntryPort configuration table entity. HwPortEntry .1.3.6.1.4.1.2011.6.3.3.4.1 |
hwPortIndexPort index, the index of this table, which exclusively
determines all the ports in a subboard.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.4.1.1 |
hwPortTypePort type.
According to the private MIB standard of the company, the product must support read-only mode.
In other words, you can query the frame type through the NMS.
You can choose for various broadband product to support read-write mode for the
dynamic control of subboard type.ro HWPortType (HUAWEI-TC-MIB) .1.3.6.1.4.1.2011.6.3.3.4.1.2 |
hwPortDescPort description, used to describe extra information of the port.
For example, for a user access device it can be adopted to describe the information
of the user who is connecting to the port.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.3.4.1.3 |
hwPortSpeedThe speed of this port.rodeprecated Integer32 .1.3.6.1.4.1.2011.6.3.3.4.1.4 |
hwPortOperStatusPort operation status.ro Enumeration .1.3.6.1.4.1.2011.6.3.3.4.1.5 |
hwPortAdminStatusPort administration status.rw Enumeration .1.3.6.1.4.1.2011.6.3.3.4.1.6 |
hwFrameLinks OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.3.5 |
hwFrameLinkNumberNumber of frame Links, which refers to the number of links between the main
frame and the standby frame of the presen device. If there are many frames,
but the device cannot know the link relation of the frames, then the initial
value of this node is 0. If a user manually adds the link between the frames later,
then this node shall be renewed.rw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.1 |
hwFrameLinkTableThe frame link table. It describes the topology relation between the frames.
For the device that can automatically discover the link relationship between the devices,
this table can be implemented as read-only table. For the device whose inter-frame
relation needs to be configured manually, this table shall support adding and deletion.
All the links must locate on the two existing ports. SEQUENCE OF HwFrameLinkEntry .1.3.6.1.4.1.2011.6.3.3.5.2 |
hwFrameLinkEntryThe entry of the frame link table. There are the left and right node for a frame link.
Each node is in the form of frame ID + slot ID + subslot + port. HwFrameLinkEntry .1.3.6.1.4.1.2011.6.3.3.5.2.1 |
hwFrameLinkIndexIndex of the frame link. It is sequentially numerated and exclusively identified in the device.
There is no restriction to the coding rule.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.1 |
hwFrameLinkLeftFrameThe ID of the left node linked to the frame, corresponding to the hwFrameIndex in the hwFrameTablerw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.2 |
hwFrameLinkLeftSlotThe ID of the left slot linked to the frame, corresponding to the hwSlotIndex in the hwSlotTable.
It indicates which slot of the left node is the link entry.rw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.3 |
hwFrameLinkLeftSubSlotLink the left subslot, corresponding to the hwSubSlotIndex in the hwSubTable.
It indicates which subslot of the left node is the link entry.rw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.4 |
hwFrameLinkLeftPortThe ID of the left port linked to the frame, corresponding to the hwPortIndex in the hwPortTable.
It indicates which port of the left node is the link entry.rw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.5 |
hwFrameLinkRightFrameThe ID of the right node linked to the frame, corresponding to the hwFrameIndex of the hwFrameTable.rw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.6 |
hwFrameLinkRightSlotThe ID of the right slot linked the frame, corresponding to the hwSlotIndex of the hwSlotTable.
It indicates which slot of the right node is the link entry.rw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.7 |
hwFrameLinkRightSubSlotLink the right subslot, corresponding to the hwSubSlotIndex in the hwSubSlotTable.
It indicates which subslot of the right node is the link entry.rw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.8 |
hwFrameLinkRightPortThe ID of the right port linked to the frame, corresponding to the hwPortIndex in the hwPortTable.
It indicates which port of the right port is the link entry.rw Integer32 .1.3.6.1.4.1.2011.6.3.3.5.2.1.9 |
hwFrameLinkOperStatusThe running status of the linkro Enumeration .1.3.6.1.4.1.2011.6.3.3.5.2.1.10 |
hwFrameLinkRowStatusThe row status of the frame link, used to add or delete a link.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.3.5.2.1.11 |
hwFrameLinkNextIndexThe frame link table indicates adding the index value to be assigned by the new link.
This leaf is used to access an index ID of the next frame link dynamically assigned by
the host before delivering the adding link. To deliver the adding link,
the value of the leaf shall be accessed, and be delivered together with the 'frame link table'.
Otherwise, the host can not execute the operation and will return the error.ro Integer32 .1.3.6.1.4.1.2011.6.3.3.5.3 |
hwNarrowBoard OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.3.6 |
hwBoardAttrTableInquiring or modifying A_ULaw, impedance and current of ASL, A32 and H511POTS ports. SEQUENCE OF HwBoardAttrEntry .1.3.6.1.4.1.2011.6.3.3.6.1 |
hwBoardAttrEntryNarrow board attribute table entity HwBoardAttrEntry .1.3.6.1.4.1.2011.6.3.3.6.1.1 |
hwBoardAulawCoding method of voice signal when digitalizing.
In different country or area it should be A law or u law.
1
2rw Integer32 .1.3.6.1.4.1.2011.6.3.3.6.1.1.1 |
hwBoardCurrentPort current supported by the board. The value ranges from 1 to 8,
which indicates the port current value supported under certain loopline impedence.
1
2
3
4
5
6
7
8rw Integer32 .1.3.6.1.4.1.2011.6.3.3.6.1.1.2 |
hwBoardImpedancePort impedance of the board. The following values indicates different impedance with
different application circumstances.
1
2
3
4
5
6
7
8
255rw Integer32 (1..8 | 255) .1.3.6.1.4.1.2011.6.3.3.6.1.1.3 |
hwCpuDevTableA table of CPU statistics. SEQUENCE OF HwCpuDevEntry .1.3.6.1.4.1.2011.6.3.4 |
hwCpuDevEntryThe Entries of hwCpuDevTable. HwCpuDevEntry .1.3.6.1.4.1.2011.6.3.4.1 |
hwCpuDevIndexIndex of hwCpuDevTable. Integer32 .1.3.6.1.4.1.2011.6.3.4.1.1 |
hwCpuDevDutyThe overall CPU duty percentage in the last 5-second period.ro Integer32 .1.3.6.1.4.1.2011.6.3.4.1.2 |
hwAvgDuty1minThe overall CPU duty percentage in the last 1 minute period.ro Integer32 .1.3.6.1.4.1.2011.6.3.4.1.3 |
hwAvgDuty5minThe overall CPU duty percentage in the last 5-minute period.ro Integer32 .1.3.6.1.4.1.2011.6.3.4.1.4 |
hwMemoryDev OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.5 |
hwMemoryDevTableThis table contains memory information. SEQUENCE OF HwMemoryDevEntry .1.3.6.1.4.1.2011.6.3.5.1 |
hwMemoryDevEntryThe Entries of hwMemoryDevTable. HwMemoryDevEntry .1.3.6.1.4.1.2011.6.3.5.1.1 |
hwMemoryDevModuleIndexIndex of hwMemoryDevTable. Integer32 .1.3.6.1.4.1.2011.6.3.5.1.1.1 |
hwMemoryDevSizeIndicates the total size of the memory module
which is on the managed object.Its unit is byte.ro Unsigned32 .1.3.6.1.4.1.2011.6.3.5.1.1.2 |
hwMemoryDevFreeIndicates the free size of the memory, in the unit of byte.ro Unsigned32 .1.3.6.1.4.1.2011.6.3.5.1.1.3 |
hwMemoryDevRawSliceUsedIndicates the used size of the raw slice memory, in the unit of byte.ro Unsigned32 .1.3.6.1.4.1.2011.6.3.5.1.1.4 |
hwMemoryDevLargestFreeThe maximum size of the memory that can be currently used, in the unit of byte.ro Unsigned32 .1.3.6.1.4.1.2011.6.3.5.1.1.5 |
hwMemoryDevFailCount of memory allocation failures.ro Integer32 .1.3.6.1.4.1.2011.6.3.5.1.1.6 |
hwMemoryDevFailNoMemCount of the memory allocationro Integer32 .1.3.6.1.4.1.2011.6.3.5.1.1.7 |
hwMemoryDevSize64Indicates the total size of the memory module incase of excessing 4G
which is on the managed object.Its unit is byte.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.6.3.5.1.1.8 |
hwMemoryDevFree64Indicates the free size of the memory incase of excessing 4G, in the unit of byte.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.6.3.5.1.1.9 |
hwBufferTableBuffer information table. SEQUENCE OF HwBufferEntry .1.3.6.1.4.1.2011.6.3.5.2 |
hwBufferEntryThe Entries of hwBufferTable. HwBufferEntry .1.3.6.1.4.1.2011.6.3.5.2.1 |
hwBufferModuleIndexIndex of hwBufferTable. Integer32 .1.3.6.1.4.1.2011.6.3.5.2.1.1 |
hwBufferSizeContains the size of byte hwBuffers, in the unit of byte. Integer32 .1.3.6.1.4.1.2011.6.3.5.2.1.2 |
hwBufferCurrentTotalContains the total number of hwBuffers currently.ro Integer32 .1.3.6.1.4.1.2011.6.3.5.2.1.3 |
hwBufferCurrentUsedContains the number of used hwBuffers currently.ro Integer32 .1.3.6.1.4.1.2011.6.3.5.2.1.4 |
hwFlashDev OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.6 |
hwFlashDevTableThis table contains falsh information. SEQUENCE OF HwFlashDevEntry .1.3.6.1.4.1.2011.6.3.6.1 |
hwFlashDevEntryThe Entries of hwFlashDevTable. HwFlashDevEntry .1.3.6.1.4.1.2011.6.3.6.1.1 |
hwFlashDevIndexIndex of hwFlashDevTable. Integer32 .1.3.6.1.4.1.2011.6.3.6.1.1.1 |
hwFlashDevSizeTotal size in Octets of Flash memory,ro Integer32 .1.3.6.1.4.1.2011.6.3.6.1.1.2 |
hwFlashDevFreeUnused Size in Octets of Flash memory.ro Integer32 .1.3.6.1.4.1.2011.6.3.6.1.1.3 |
hwFlashDevEraseTimeThe last time when Flash was erased after powerup.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.6.3.6.1.1.4 |
hwFlashDevEraseStatusStatus of current or last flash erasing.ro Enumeration .1.3.6.1.4.1.2011.6.3.6.1.1.5 |
hwFlashDevStatusStatus of the availability of flash.ro Enumeration .1.3.6.1.4.1.2011.6.3.6.1.1.6 |
hwAlarmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.7 |
hwAlarmTableThe table of Alarms which the device occurred.obsolete SEQUENCE OF HwAlarmEntry .1.3.6.1.4.1.2011.6.3.7.1 |
hwAlarmEntryThe Entry of the Alarm Table.obsolete HwAlarmEntry .1.3.6.1.4.1.2011.6.3.7.1.1 |
hwAlarmSerialIndexThe Index of Alarms. Serial number.roobsolete Integer32 .1.3.6.1.4.1.2011.6.3.7.1.1.1 |
hwAlarmTypeThe type of the Alarm.roobsolete Enumeration .1.3.6.1.4.1.2011.6.3.7.1.1.2 |
hwAlarmOcurTimeThe time when this Alarm occurred.roobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.7.1.1.3 |
trapObjectIdValueThe OID String of the trap.roobsolete OCTET STRING .1.3.6.1.4.1.2011.6.3.7.1.1.4 |
hwDevTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.8 |
hwDevTrapVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.8.1 |
hwFrameAdminResultFrame administration result.ro Enumeration .1.3.6.1.4.1.2011.6.3.8.1.1 |
hwSlotAdminResultSlot administration result.ro Enumeration .1.3.6.1.4.1.2011.6.3.8.1.2 |
hwSubslotAdminResultSubslot administration result.ro Enumeration .1.3.6.1.4.1.2011.6.3.8.1.3 |
hwPortAdminResultPort administration result.ro Enumeration .1.3.6.1.4.1.2011.6.3.8.1.4 |
hwDevGeneralTrapsPre OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.8.5 |
hwDevGeneralTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.8.5.0 |
hwFrameAdminResultTrapFrame administration result Trap report NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.3.8.5.0.1 |
hwSlotAdminResultTrapSlot administration result Trap report NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.3.8.5.0.2 |
hwSubSlotAdminResultTrapSubslot administration result Trap report NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.3.8.5.0.3 |
hwPortAdminResultTrapPort administration result Trap report NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.3.8.5.0.4 |
hwCliUserMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.10 |
hwCliUserParaTableCLI user parameters configuration table. SEQUENCE OF HwCliUserParaEntry .1.3.6.1.4.1.2011.6.3.10.1 |
hwCliUserParaEntryCLI user parameters configuration table entity. HwCliUserParaEntry .1.3.6.1.4.1.2011.6.3.10.1.1 |
hwCliUserNameName of the CLI user. OCTET STRING .1.3.6.1.4.1.2011.6.3.10.1.1.1 |
hwCliUserPasswordpassword of the CLI user.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.10.1.1.2 |
hwCliUserLevelLevel of CLI user(1:common,2:operator,3:administrator).rw Enumeration .1.3.6.1.4.1.2011.6.3.10.1.1.3 |
hwCliUserLoginsThe num of user can login in one time.rw Integer32 .1.3.6.1.4.1.2011.6.3.10.1.1.4 |
hwCliUserDecrDescription of CLI user.rw OCTET STRING .1.3.6.1.4.1.2011.6.3.10.1.1.5 |
hwCliUserRowStatusOperation status of CLI user,the CLI user
can be added,deleted and modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.10.1.1.6 |
hwCliClientTableCLI client table. SEQUENCE OF HwCliClientEntry .1.3.6.1.4.1.2011.6.3.10.2 |
hwCliClientEntryCLI user parameters configuration table entity. HwCliClientEntry .1.3.6.1.4.1.2011.6.3.10.2.1 |
hwCliClientIDClient ID(1..5). Integer32 .1.3.6.1.4.1.2011.6.3.10.2.1.1 |
hwCliClientUserNameUser name of client.ro OCTET STRING .1.3.6.1.4.1.2011.6.3.10.2.1.2 |
hwCliClientTypeType of client(1:serial,2:telnet).ro Enumeration .1.3.6.1.4.1.2011.6.3.10.2.1.3 |
hwCliClientIpThe IP address of client.ro IpAddress .1.3.6.1.4.1.2011.6.3.10.2.1.4 |
hwCliClientLoginTimeLogin time of Client.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.10.2.1.5 |
hwCliClientAdminStatusadmin status of client, can disconnect client.rw Enumeration .1.3.6.1.4.1.2011.6.3.10.2.1.6 |
hwDevCompatibleTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.11 |
hwCompatibleSysOidThe compatible SYSOID of new network element.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.11.1 |
hwCompatibleVersionThe compatible version of new network element.ro OCTET STRING .1.3.6.1.4.1.2011.6.3.11.2 |
hwCompatibleVRCBThe compatible VRCB of new network element.ro OCTET STRING .1.3.6.1.4.1.2011.6.3.11.3 |
hwCompatibleProductNameThe compatible product name of new network element.ro OCTET STRING .1.3.6.1.4.1.2011.6.3.11.4 |
hwDevConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.12 |
hwDevCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.12.1 |
hwDevGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.3.12.2 |