HUAWEI-TC-MIB
AI MIB Summary
The HUAWEI-TC-MIB module defines reusable text conventions and common data definitions required by Huawei network devices to standardize the encoding of managed objects within their SNMP MIB tree. It serves as a foundational schema for consistent data representation across Huawei hardware and software, enabling precise monitoring of device attributes without defining specific operational metrics itself.
Huawei text conventions and common defination.
Main OID:
huaweiTCMIB.1.3.6.1.4.1.2011.20021210
14
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
huaweiTCMIBHuawei text conventions and common defination. MODULE-IDENTITY .1.3.6.1.4.1.2011.20021210 |
hwAlarmIdThe trap id only valids in the alarm trap Varible binding parameters .ro Integer32 .1.3.6.1.4.1.2011.20021210.1 |
hwAlarmTimeThe trap time only valids in the alarm trap Varible binding parameters .ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.20021210.2 |
hwAlarmSnThe serial number only valids in the alarm trap Varible binding parameters .ro Integer32 .1.3.6.1.4.1.2011.20021210.3 |
hwCauseIdThe cause for sending a trap .ro Integer32 .1.3.6.1.4.1.2011.20021210.4 |
hwTrapTypeThe trap type .
Options:
1.eventAlarm(0) - Event alarm
2.faultAlarm(1) - Fault alarm
3.clearAlarm(2) - Recovery alarm
4.synAlarm(3) - Synchronization alarm
5.maitainTrap(10) - Maintenance trap
6.topDiscovery(11) - Topology discovery trap
7.debugTrap(12) - Debugging trapro Enumeration .1.3.6.1.4.1.2011.20021210.5 |
hwFrameTypeOidthe Frames definition only for Entity-Mib usero HWFrameType .1.3.6.1.4.1.2011.20021210.11 |
hwSlotTypeOidthe slots definition only for Entity-Mib usero HWPCBType .1.3.6.1.4.1.2011.20021210.12 |
hwSubslotTypeOidthe sub slots definition only for Entity-Mib usero HWSubPCBType .1.3.6.1.4.1.2011.20021210.13 |
hwPortTypeOidthe ports definition only for Entity-Mib usero HWPortType .1.3.6.1.4.1.2011.20021210.14 |
hwVirtualEntityOidThe virtual entity definition only for Entity-mib.ro HWVirtualEntityType .1.3.6.1.4.1.2011.20021210.15 |
hwAdditionalEntityOidThe additional entity definition only for Entity-mib.ro HWAdditionalEntityType .1.3.6.1.4.1.2011.20021210.16 |
ifAdminStatusThe current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If ifAdminStatus is down(2) then
ifOperStatus should be down(2). If ifAdminStatus is
changed to up(1) then ifOperStatus should change to
up(1) if the interface is ready to transmit and
receive network traffic; it should change to
dormant(5) if the interface is waiting for external
actions (such as a serial line waiting for an incoming
connection); it should remain in the down(2) state if
and only if there is a fault that prevents it from
going to the up(1) state; it should remain in the
notPresent(6) state if the interface has missing
(typically, hardware) components.
huawei mib expand from 65536 .
Because management states in the standard MIB can't satisfy
the request of all kinds of the product ,
the extension is performed.
Options:
1. up(1) - indicates up operation
2. down(2) - indicates down operation
3. testing(3) - indicates testing operation
4. block(65536) - indicates blocking operation
5. unblock(65537) - indicates unblocking operation
6. reset(65538) - indicates reseting operation
7. localloopback(65539) - indicates local looping back operation
8. remoteloopback(65540) - indicates remote looping back operation
9. payloadloopback(65541) - indicates Payload looping back operation
10.unloopback(65542) - indicates Canceling loopback operation
11.linkrxblock(65543) - indicates Blocking the Rx on a link
12.linktxblock(65544) - indicates Blocking the Tx on a link
13.linkallblock(65545) - indicates Blocking both the Rx and Tx on a link
14.linkrxunblock(65546) - indicates Unblocking the Rx on a link
15.linktxunblock(65547) - indicates Unblocking the Tx on a link
16.linkallunblock(65548) - indicates Unblocking both the Rx and Tx on a link
17.adslloopbackafe(65549) - indicates AFE looback operation on an ADSL port
18.adslloopbackhybrid(65550) - indicates HYBRID loopback operation on an ADSL portrw Enumeration .1.3.6.1.4.1.3727.20.20.3.1.2.2.1.7 |
ifOperStatusThe current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If ifAdminStatus is down(2) then
ifOperStatus should be down(2). If ifAdminStatus is
changed to up(1) then ifOperStatus should change to
up(1) if the interface is ready to transmit and
receive network traffic; it should change to
dormant(5) if the interface is waiting for external
actions (such as a serial line waiting for an incoming
connection); it should remain in the down(2) state if
and only if there is a fault that prevents it from
going to the up(1) state; it should remain in the
notPresent(6) state if the interface has missing
(typically, hardware) components.
huawei mib expand from 65536 .
Because management states in the standard MIB can't satisfy
the request of all kinds of the product ,
the extension is performed.
Options:
1. up(1) - indicates that the operation state is up
2. down(2) - indicates that the operation state is down
3. testing(3) - indicates that the operation state is testing
4. unknown(4) - indicates that the operation state is unknown
5. dormant(5) - indicates that the operation state is dormant
6. notPresent(6) - indicates that the operation state is notPresent
7. lowerLayerDown(7) - indicates that the operation state is lowerLayerDown
8. activing(65536) - indicates that the operation state is activing
9. block(65537) - indicates that the operation state is block
10.config(65538) - indicates that the operation state is config
11.localloopback(65539) - indicates that the operation state is Local loopback
12.remoteloopback(65540) - indicates that the operation state is Remote loopback
13.payloadloopback(65541) - indicates that the operation state is Payload loopback
14.blockandlocalloopback(65542) - indicates that the operation state is Blocking and performing the local loopback
15.blockandremoteloopback(65543) - indicates that the operation state is Blocking and performing the remote loopback
16.blockandpayloadloopback(65544) - indicates that the operation state is Blocking and performing the payload loopback
17.linkrxblock(65545) - indicates that the operation state is Blocking the Rx on a link
18.linktxblock(65546) - indicates that the operation state is Blocking the Tx on a link
19.linkallblock(65547) - indicates that the operation state is Blocking both the Rx and Tx on a link
20.fault(65548) - indicates that the operation state is fault
21.unconfig(65549) - indicates that the operation state is not configured
22.empty(65550) - indicates that the operation state is empty
23.adslloopbackafe(65551) - indicates AFE looback on an ADSL port
24.adslloopbackhybrid(65552) - indicates HYBRID loopback on an ADSL portro Enumeration .1.3.6.1.4.1.3727.20.20.3.1.2.2.1.8 |