HUAWEI-NTP-TRAP-MIB
The HUAWEI-NTP-TRAP-MIB module enables Huawei network devices to generate SNMP traps for monitoring Network Time Protocol (NTP) operational state transitions and changes in the system peer configuration. These notifications specifically track the `hwNtpStateChangeTrap` for NTP service status and the `hwNtpSysPeerChangeTrap` for dynamic updates to the configured NTP peer list.
Imported Objects
Objects
13 total| Object Name |
|---|
hwNtpTrapMibThis MIB is to provide TRAP support for NTP.
hwNtpStateChangeTrap & hwNtpSysPeerChangeTrap are added to notify the
NTP state change & system peer change information MODULE-IDENTITY .1.3.6.1.4.1.2011.6.80 |
IMPORTSThis MIB is to provide TRAP support for NTP.
hwNtpStateChangeTrap & hwNtpSysPeerChangeTrap are added to notify the
NTP state change & system peer change information Unknown .1.3.6.1.4.1.2011.6.80 |
hwNtpTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.80.1 |
hwNtpStateIndicates the NTP local clock statero OCTET STRING .1.3.6.1.4.1.2011.6.80.1.1 |
hwNtpSourceSpecifies server IP address to which local NTP clock is synchronizedro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.6.80.1.2 |
hwNtpSourceVpnNameIndicates Vpn instance associated with the peer to which the local NTP clock is synchronizedro OCTET STRING .1.3.6.1.4.1.2011.6.80.1.3 |
hwNtpOldSourceSpecifies server IP address to which local NTP clock was synchronized last timero InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.6.80.1.4 |
hwNtpOldSourceVpnNameIndicates Vpn instance associated with the peer to which the local NTP clock is synchronized last timero OCTET STRING .1.3.6.1.4.1.2011.6.80.1.5 |
hwNtpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.80.2 |
hwNtpStateChangeTrapThis TRAP is used to notify when the NTP state changes from synchronized to unsynchronized & vice-versa.
NTP state changes occur due to reasons listed below
1) System clock is reset by configuration.
2) Selected peer is deleted by configuration.
3) Selected peer is unreachable.
4) Authentication failed for selected peer.
5) Selected peer clock is not synchronized.
6) Time elapsed since peer clock's last update is not within permissible limit.
7) Source stratum is greater than the local stratum.
8) System synchronization source lost.
9) NTP mode mismatch for selected peer. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.80.2.1 |
hwNtpSysPeerChangeTrapThis TRAP is used to notify the NTP system peer change from one source IP to other source IP without state change.
This trap is generated when the selected NTP peer is changed NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.80.2.2 |
hwNtpTrapMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.80.3 |
hwNtpTrapMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.80.3.1 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.