HUAWEI-MFLP-MIB
AI MIB Summary
The HUAWEI-MFLP-MIB module enables monitoring and management of MAC address flapping events on Huawei network devices by tracking flapping interfaces, frequency counts, and associated loop detection status. It provides specific metrics for identifying unstable Layer 2 topology changes and triggering alarm mechanisms to mitigate broadcast storms or switching loops.
Mac flapping management MIB.
Main OID:
hwMFlpMIB.1.3.6.1.4.1.2011.5.25.160
59
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
59 total| Object Name |
|---|
hwMFlpMIBMac flapping management MIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.160 |
P-BRIDGE-MIBMac flapping management MIB. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160 |
hwMflpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.160.1 |
hwMflpVlanCfgTableThe mac flapping table.The table that
contains the mac flapping information
currently operating in VLAN mode on this device. SEQUENCE OF HwMflpVlanCfgEntry .1.3.6.1.4.1.2011.5.25.160.1.1 |
hwMflpVlanCfgEntryEntries of the mac flapping table in VLAN mode. HwMflpVlanCfgEntry .1.3.6.1.4.1.2011.5.25.160.1.1.1 |
hwMflpVlanIdThe VLAN ID referring to the VLAN which is correlative to the hwMflpVlanCfg table.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.160.1.1.1.1 |
hwMflpVlanCfgLoopTimesThe number of mac move-times.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.1.1.2 |
hwMflpVlanCfgDetectCycleThe interval of detecting the mac move-times.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.1.1.3 |
hwMflpVlanCfgCyclesThe number of interval.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.1.1.4 |
hwMflpVlanCfgActionThe action switch of this entry. The meanings of
the values are:
block(1), alarmOnly(2)rw Enumeration .1.3.6.1.4.1.2011.5.25.160.1.1.1.5 |
hwMflpVlanCfgBlockTimeThe blocked time of the interface.
When the value of hwMflpAction is 1, value of hwMflpBlockTime should be
between 10 and 65535.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.1.1.6 |
hwMflpVlanCfgRetryTimesThe retry times of permanent interdiction.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.1.1.7 |
hwMflpVlanCfgIfNameThe interface name, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.1.1.8 |
hwMflpVlanCfgAlarmReasonThe alarm reason, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.1.1.9 |
hwMflpVlanCfgRowstatusThe operating state of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.1.1.10 |
hwMflpVlanDetectMACThe detect MAC, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.1.1.11 |
hwMflpVlanCfgMacAddrThe MAC address, only used for trap.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.1.1.12 |
hwMflpVlanCfgPreIfNameThe interface name, only used for trap.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.1.1.13 |
hwMflpVsiCfgTableThe mac flapping table .The table that
contains the mac flapping information
currently operating in VSI mode on this device. SEQUENCE OF HwMflpVsiCfgEntry .1.3.6.1.4.1.2011.5.25.160.1.2 |
hwMflpVsiCfgEntryEntries of The mac flapping table in VSI mode. HwMflpVsiCfgEntry .1.3.6.1.4.1.2011.5.25.160.1.2.1 |
hwMflpVsiNameThe VSI name referring to the VSI which is correlative to the hwMflpVsiCfg table.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.160.1.2.1.1 |
hwMflpVsiCfgLoopTimesThe number of loop-times.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.2.1.2 |
hwMflpVsiCfgDetectCycleThe interval of detecting the loop-times.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.2.1.3 |
hwMflpVsiCfgCyclesThe number of detect-cycle.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.2.1.4 |
hwMflpVsiCfgActionThe action switch of this entry. The meanings of
the values are:
block(1), alarmOnly(2)rw Enumeration .1.3.6.1.4.1.2011.5.25.160.1.2.1.5 |
hwMflpVsiCfgBlockTimeThe blocked time of the interface.
When the value of hwMflpAction is 1, value of hwMflpBlockTime should be
between 10 and 65535.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.2.1.6 |
hwMflpVsiCfgRetryTimesThe retry times of permanent interdiction.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.2.1.7 |
hwMflpVsiCfgBlockPolicyThe block policy switch of this entry. The meanings of
the values are:
default(1), acFirst(2), pwFirst(3), acOnly(4)rw Enumeration .1.3.6.1.4.1.2011.5.25.160.1.2.1.8 |
hwMflpVsiCfgAcNameThe AC interface name, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.2.1.9 |
hwMflpVsiCfgAlarmReasonThe alarm reason, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.2.1.10 |
hwMflpVsiCfgIpAddrThe peer IP address, only used for trap.ro IpAddress .1.3.6.1.4.1.2011.5.25.160.1.2.1.11 |
hwMflpVsiCfgPwIdThe PW ID, only used for trap.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.160.1.2.1.12 |
hwMflpVsiCfgRowstatusThe operating state of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.2.1.13 |
hwMflpVsiDetectMACThe detect MAC, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.2.1.14 |
hwMflpLinkBlkedIfNameMAC-Flapping association, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.2.1.15 |
hwMflpVsiCfgAcNameEx1The AC interface name, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.2.1.16 |
hwMflpVsiCfgAcNameEx2The AC interface name, only used for trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.160.1.2.1.17 |
hwMflpGeneralObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.160.2 |
hwMflpTrapEnableThis object indicates the enable sign of MFLP notification.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.160.2.1 |
hwMflpMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.160.3 |
hwMflpIfBlockThis notification indicates the interface blocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.1 |
hwMflpIfResumeThis notification indicates the interface resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.2 |
hwMflpAcBlockThis notification indicates the interface blocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.3 |
hwMflpAcResumeThis notification indicates the interface resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.4 |
hwMflpPwBlockThis notification indicates the PW blocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.5 |
hwMflpPwResumeThis notification indicates the PW resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.6 |
hwMflpVlanAlarmThis notification indicates alarm only when loop existed in vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.7 |
hwMflpVsiAlarmThis notification indicates alarm only when loop existed in vsi. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.8 |
hwMflpMacAddrAlarmThis notification indicates the MAC locked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.9 |
hwMflpMacAddrResumeThis notification indicates the MAC resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.10 |
hwMflpQuitVlanAlarmThis notification indicates the interface leaved from vlan because mac move detected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.11 |
hwMflpQuitVlanResumeThis notification indicates the Interface leaved from vlan resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.12 |
hwMflpVlanLoopAlarmThis notification indicates alarm only when loop existed in vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.13 |
hwMflpVlanLoopAlarmResumeThis notification indicates alarm only when loop existed in vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.14 |
hwMflpDefaultAlarmThis notification indicates alarm only when loop existed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.15 |
hwMflpDefaultResumeThis notification indicates alarm only when loop resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.160.3.16 |
hwMflpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.160.4 |
hwMflpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.160.4.1 |
hwMflpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.160.4.2 |