HUAWEI-MIRROR-MIB
AI MIB Summary
The HUAWEI-MIRROR-MIB module provides management interfaces for configuring and monitoring port mirroring (SPAN) sessions on Huawei network devices, specifically tracking session states, source/destination port bindings, and traffic redirection parameters.
MIB description of mirror.
Main OID:
hwMirrorMIB.1.3.6.1.4.1.2011.5.162
75
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
hwMirrorMIBMIB description of mirror. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.162 |
hwMirrorMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.162.1 |
hwLocalMirror OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.162.1.1 |
hwLocalObserveTableThe hwLocalObserveTable lists local mirror characters. SEQUENCE OF HwLocalObserveEntry .1.3.6.1.4.1.2011.5.162.1.1.1 |
hwLocalObserveEntryThe hwLocalObserveEntry lists local mirror characters. HwLocalObserveEntry .1.3.6.1.4.1.2011.5.162.1.1.1.1 |
hwLocalObservePortIfindex is the index of the observing port and is used to search the name of an observing port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.162.1.1.1.1.1 |
hwLocalObserveIndexIndex of an observing port that identifies the observing port.
Single chassis:
(The index of a physical port corresponds to the slot number of a board.
The observe index ranges from 1 to 32.One board supports 32 logical
observing ports.)
Multi-chassis:
Supports physical observing ports only. The observe index ranges from 1 to 128.rw Integer32 .1.3.6.1.4.1.2011.5.162.1.1.1.1.2 |
hwLocalObserveWithLinkLayerHeaderSame interworking attribute.
1: different interworking, mirroring packets at and above the IP layer.
0: same interworking, mirroring packets at and above Layer 2.
Default value: 1.rw Integer32 .1.3.6.1.4.1.2011.5.162.1.1.1.1.3 |
hwLocalObserveRowStatusRow status. The value ranges from 1 to 6 but usually 4 and 6 are used.
createAndGo[4] - create a row.
destroy[6] -delete a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.1.1.1.4 |
hwLocalPortMirrorTableThe hwLocalPortMirrorTable lists local mirror characters. SEQUENCE OF HwLocalPortMirrorEntry .1.3.6.1.4.1.2011.5.162.1.1.2 |
hwLocalPortMirrorEntryThe hwLocalPortMirrorEntry lists local mirror characters. HwLocalPortMirrorEntry .1.3.6.1.4.1.2011.5.162.1.1.2.1 |
hwLocalMirrorPortIfindex of the mirroring port and is used to search the name of a mirroring port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.162.1.1.2.1.1 |
hwLocalMirrorBearingMirroring direction: inbound, outbound, and in-out.1:inbound 2:outbound 3:in-out.rw Enumeration .1.3.6.1.4.1.2011.5.162.1.1.2.1.2 |
hwLocalCpuPacketFlagIndicates whether the packets sent to the CPU need to be mirrored.
True: CPU packets are forwarded;
False: CPU packets are not forwarded.
You can configure this object only when the mirroring direction is 1 or 3.
Default value: false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.1.2.1.3 |
hwLocalPortMirrorCarCAR (CIR) of mirrored packets, expressed in thousand bits per second.
The default value is 0, which indicates that CAR is not performed.rw Integer32 (0 | 100..2500000) UNITS "Kbps" .1.3.6.1.4.1.2011.5.162.1.1.2.1.4 |
hwLocalPortMirrorRowStatusRow status. The value ranges from 1 to 6 but usually 4 and 6 are used.
createAndGo[4] - create a row.
destroy[6] -delete a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.1.2.1.5 |
hwLocalFlowMirrorTableThe hwLocalFlowMirrorTable lists local mirror characters. SEQUENCE OF HwLocalFlowMirrorEntry .1.3.6.1.4.1.2011.5.162.1.1.3 |
hwLocalFlowMirrorEntryThe hwLocalFlowMirrorEntry lists local mirror characters. HwLocalFlowMirrorEntry .1.3.6.1.4.1.2011.5.162.1.1.3.1 |
hwLocalBehaviorNameTraffic behavior view name. OCTET STRING .1.3.6.1.4.1.2011.5.162.1.1.3.1.1 |
hwLocalFlowMirrorEnableIndicates whether the flow mirroring is enabled.
Disable indicates that flow mirroring is disabled;
Enable indicates that flow mirroring is enabled.
Default value: disable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.162.1.1.3.1.2 |
hwLocalFlowMirrorCarCAR (CIR) of mirrored packets, expressed in thousand bits per second.
The default value is 0, which indicates that CAR is not performed.rw Integer32 (0 | 100..2500000) UNITS "Kbps" .1.3.6.1.4.1.2011.5.162.1.1.3.1.3 |
hwLocalFlowMirrorRowStatusRow status. The value ranges from 1 to 6 but usually 4 and 6 are used.
createAndGo[4] - create a row.
destroy[6] -delete a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.1.3.1.4 |
hwLocalSlotMirrorTableThe hwLocalSlotMirrorTable lists local mirror characters. SEQUENCE OF HwLocalSlotMirrorEntry .1.3.6.1.4.1.2011.5.162.1.1.4 |
hwLocalSlotMirrorEntryThe hwLocalFlowMirrorEntry lists local mirror characters. HwLocalSlotMirrorEntry .1.3.6.1.4.1.2011.5.162.1.1.4.1 |
hwLocalSlotNoSlot number of a board. Integer32 .1.3.6.1.4.1.2011.5.162.1.1.4.1.1 |
hwSlotObserveIndexIndicates the index of the observing port.rw Integer32 .1.3.6.1.4.1.2011.5.162.1.1.4.1.2 |
hwLocalSlotMirrorRowStatusRow status. The value ranges from 1 to 6 but usually 4 and 6 are used.
createAndGo[4] - create a row.
destroy[6] -delete a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.1.4.1.3 |
hwPortMirrorInfoTableThe hwPortMirrorInfoTable lists local and remote mirror characters. SEQUENCE OF HwPortMirrorInfoEntry .1.3.6.1.4.1.2011.5.162.1.1.5 |
hwPortMirrorInfoEntryThe hwPortMirrorInfoEntry lists local and remote mirror characters. HwPortMirrorInfoEntry .1.3.6.1.4.1.2011.5.162.1.1.5.1 |
hwMirrorPortIndexPort index of the mirroring port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.162.1.1.5.1.1 |
hwMirrorTypeMirroring type: local or remote1: local 2: remote.ro Enumeration .1.3.6.1.4.1.2011.5.162.1.1.5.1.2 |
hwMirrorCarCAR (CIR) of mirrored packets, expressed in thousand bits per secondro Integer32 (0 | 100..2500000) UNITS "Kbps" .1.3.6.1.4.1.2011.5.162.1.1.5.1.3 |
hwMirrorClassType: port/policy1: port 2: policy.ro Enumeration .1.3.6.1.4.1.2011.5.162.1.1.5.1.4 |
hwMirrorBearingMirroring direction: inbound(1), outbound(2), and in-out(3).
When the direction is in-out, commands for both inbound and outbound configurations are required.ro Enumeration .1.3.6.1.4.1.2011.5.162.1.1.5.1.5 |
hwMirrorCpuPacketFlagIndicates whether the packets sent to the CPU need to be mirrored.
True: CPU packets are forwarded;
False: CPU packets are not forwarded.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.1.5.1.6 |
hwMirrorWithLinkLayerHeaderSame interworking attribute.
1: different interworking, mirroring packets at and above the IP layer.
0: same interworking, mirroring packets at and above Layer 2.
Default value: 1.ro Integer32 .1.3.6.1.4.1.2011.5.162.1.1.5.1.7 |
hwRemoteMirrorInstanceNamemirror instance name. Max 31 characters.ro OCTET STRING .1.3.6.1.4.1.2011.5.162.1.1.5.1.8 |
hwRemoteMirror OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.162.1.2 |
hwRemoteObserveTableThe hwRemoteObserveTable lists remote mirror characters. SEQUENCE OF HwRemoteObserveEntry .1.3.6.1.4.1.2011.5.162.1.2.1 |
hwRemoteObserveEntryThe hwLocalPortMirrorInfoEntry lists local mirror characters. HwRemoteObserveEntry .1.3.6.1.4.1.2011.5.162.1.2.1.1 |
hwRemoteObservePortPort ifindex of the observing port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.162.1.2.1.1.1 |
hwRemoteIdentifierMirror Identifier.rw Integer32 .1.3.6.1.4.1.2011.5.162.1.2.1.1.2 |
hwRemoteDescriptionDescription of the observing port.rw OCTET STRING .1.3.6.1.4.1.2011.5.162.1.2.1.1.3 |
hwRemoteObserveWithLinkLayerHeaderSame interworking attribute.
1: different interworking, mirroring packets at and above the IP layer.
0: same interworking, mirroring packets at and above Layer 2.
Default value: 1.rw Integer32 .1.3.6.1.4.1.2011.5.162.1.2.1.1.4 |
hwRemoteObserveRowStatusRow status. The value ranges from 1 to 6 but usually 4 and 6 are used.
createAndGo[4] - create a row.
destroy[6] -delete a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.2.1.1.5 |
hwRemotePortMirrorTableThe hwRemotePortMirrorTable lists remote mirror characters. SEQUENCE OF HwRemotePortMirrorEntry .1.3.6.1.4.1.2011.5.162.1.2.2 |
hwRemotePortMirrorEntryThe hwRemotePortMirrorTable lists local mirror characters. HwRemotePortMirrorEntry .1.3.6.1.4.1.2011.5.162.1.2.2.1 |
hwRemoteMirrorPortPort index of the mirroring port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.162.1.2.2.1.1 |
hwRemoteMirrorBearingMirroring direction: inbound(1), outbound(2), and in-out(3).
When the direction is in-out, commands for both inbound and outbound configurations are required.rw Enumeration .1.3.6.1.4.1.2011.5.162.1.2.2.1.2 |
hwRemoteCpuPacketFlagIndicates whether the packets sent to the CPU need to be mirrored.
True: CPU packets are forwarded;
False: CPU packets are not forwarded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.2.2.1.3 |
hwPortMirrorInstanceNameName of the mirroring instance. It must already exist in the MIB table.rw OCTET STRING .1.3.6.1.4.1.2011.5.162.1.2.2.1.4 |
hwRemotePortMirrorCarCAR (CIR) of mirrored packets, expressed in thousand bits per second by default,
CAR is not performed for mirrored packets.rw Integer32 (0 | 100..2500000) UNITS "Kbps" .1.3.6.1.4.1.2011.5.162.1.2.2.1.5 |
hwRemotePortMirrorRowStatusRow status. The value ranges from 1 to 6 but usually 4 and 6 are used.
createAndGo[4] - create a row.
destroy[6] -delete a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.2.2.1.6 |
hwRemoteFlowMirrorTableThe hwRemoteFlowMirrorTable lists remote mirror characters. SEQUENCE OF HwRemoteFlowMirrorEntry .1.3.6.1.4.1.2011.5.162.1.2.3 |
hwRemoteFlowMirrorEntryThe hwRemoteFlowMirrorEntry lists local mirror characters. HwRemoteFlowMirrorEntry .1.3.6.1.4.1.2011.5.162.1.2.3.1 |
hwRemoteBehaviorNameName of the traffic behavior. OCTET STRING .1.3.6.1.4.1.2011.5.162.1.2.3.1.1 |
hwFlowMirrorInstanceNameName of the mirroring instance.rw OCTET STRING .1.3.6.1.4.1.2011.5.162.1.2.3.1.2 |
hwRemoteFlowMirrorCarCAR (Committed Access Rate) setting of the mirror flow. The value indicates the CIR(Committed information rate) measured in kbps.rw Integer32 (0 | 100..2500000) UNITS "Kbps" .1.3.6.1.4.1.2011.5.162.1.2.3.1.3 |
hwRemoteFlowMirrorRowStatusRow status. The value ranges from 1 to 6 but usually 4 and 6 are used.
createAndGo[4] - create a row.
destroy[6] -delete a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.2.3.1.4 |
hwRemoteMirrorInstanceTableThe hwRemoteMirrorInstanceTable lists remote mirror characters. SEQUENCE OF HwRemoteMirrorInstanceEntry .1.3.6.1.4.1.2011.5.162.1.2.4 |
hwRemoteMirrorInstanceEntryThe hwRemoteMirrorInstanceEntry lists mirror instance characters. HwRemoteMirrorInstanceEntry .1.3.6.1.4.1.2011.5.162.1.2.4.1 |
hwMirrorInstanceNameMirroring instance name. Max 31 characters OCTET STRING .1.3.6.1.4.1.2011.5.162.1.2.4.1.1 |
hwRemoteObservePortIpRemote mirror destination.rw IpAddress .1.3.6.1.4.1.2011.5.162.1.2.4.1.2 |
hwRemoteMirrorIdentifierMirror identifier.rw Integer32 (0 | 1..64) .1.3.6.1.4.1.2011.5.162.1.2.4.1.3 |
hwRemoteMirrorWithLinkLayerHeaderSame interworking attribute.
1: different interworking, mirroring packets at and above the IP layer.
0: same interworking, mirroring packets at and above Layer 2.
Default value: 1.rw Integer32 .1.3.6.1.4.1.2011.5.162.1.2.4.1.4 |
hwMirrorFlowClassType of mirrored flows. The value of 0 to 7 corresponds to <be,af1,af2,af3,af4,ef,cs6,cs7> respectively.
be (0),
af1 (1),
af2 (2),
af3 (3),
af4 (4),
ef (5),
cs6 (6),
cs7 (7)rw Enumeration .1.3.6.1.4.1.2011.5.162.1.2.4.1.5 |
hwMirrorSliceSizeNumber of bytes of intercepted packets, expressed in bytes.
The value of size ranges from 64 to 9600.rw Integer32 (0 | 64..9600) UNITS "Byte" .1.3.6.1.4.1.2011.5.162.1.2.4.1.6 |
hwMirrorTunnelIndexIndex of the tunnel that uniquely identifies the tunnel.ro Integer32 .1.3.6.1.4.1.2011.5.162.1.2.4.1.7 |
hwMirrorTunnelTypeType of the tunnel:
1: LSP tunnel
2: TE tunnel
3: GRE tunnelro Enumeration .1.3.6.1.4.1.2011.5.162.1.2.4.1.8 |
hwMirrorTunnelStatusstatus of tunnel
0:DOWN
1:UPro Integer32 .1.3.6.1.4.1.2011.5.162.1.2.4.1.9 |
hwMirrorTunnelPolicyTunnel policy name. Max 19 charactersrw OCTET STRING .1.3.6.1.4.1.2011.5.162.1.2.4.1.10 |
hwMirrorInstanceRowStatusRow status. The value ranges from 1 to 6 but usually 4 and 6 are used.
createAndGo[4] - create a row.
destroy[6] -delete a row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.162.1.2.4.1.11 |
hwMirrorConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.162.11 |
hwMirrorCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.162.11.1 |
hwBaseMirrorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.162.11.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →HUAWEI-MIB
The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
3074 objects→
HUAWEI-SERVER-IBMC-MIB
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
2171 objects→
HUAWEI-XPON-MIB
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
1553 objects→
H3C-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1462 objects→
HUAWEI-WLAN-CONFIGURATION-MIB
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
1280 objects→
HUAWEI-XQoS-MIB
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.
1134 objects→