HUAWEI-ISIS-CONF-MIB
AI MIB Summary
The HUAWEI-ISIS-CONF-MIB provides vendor-specific management objects for configuring and monitoring IS-IS protocol parameters, including neighbor adjacency states, interface metrics, and LSP generation settings, on Huawei network devices. This module enables the retrieval of system-level IS-IS topology data and the application of configuration changes to control routing behavior across the network infrastructure.
The HUAWEI PRIVATE MIB contains objects belonging to processes of the IS-IS protocol existing on the system. It defines the model used to represent data that exists elsewhere in the system and on peripheral devices. There are no constraints on this MIB.
Main OID:
hwISIS.1.3.6.1.4.1.2011.5.25.24
260
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
260 total| Object Name |
|---|
hwISISThe HUAWEI PRIVATE MIB contains objects belonging to processes of the IS-IS protocol existing on the system.
It defines the model used to represent data that exists elsewhere in the system and on peripheral devices.
There are no constraints on this MIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.24 |
hwIsisConf OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.24.2 |
hwIsisMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.24.2.1 |
hwIsisProcBaseTableThe set of commands of the Integrated IS-IS protocol existing on the system. SEQUENCE OF HwIsisProcBaseEntry .1.3.6.1.4.1.2011.5.25.24.2.1.1 |
hwIsisProcBaseEntryEach row defines some commmands to a single process of the IS-IS protocol existing on the system.
These commands belong to the IS-IS process. HwIsisProcBaseEntry .1.3.6.1.4.1.2011.5.25.24.2.1.1.1 |
hwIsisProcIdIndexThe value of this object identifies the IS-IS process ID. The value ranges from 1 to 65535. Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.1 |
hwIsisProcVpnNameThe value of this object identifies the name of the IPv4 VPN instance bound to the IS-IS process. The value ranges from 0 to 31.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.2 |
hwIsisProcVpn6NameThe value of this object identifies the name of the IPv6 VPN instance bound to the IS-IS process. The value ranges from 0 to 31.rwobsolete OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.3 |
hwIsisProcAreaAuthTypeThe value of this object identifies the type of IS-IS area authentication.
null (0): Area authentication is not configured.
md5 (1): The password is sent after being encrypted through MD5.
simple (2): The password is sent in the form of simple text.
keychain (3): The key chain table that changes with time is sent after being encrypted through MD5.
By default, area authentication is not configured.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.4 |
hwIsisProcAreaAuthPasswordNameThis object indicates the password of IS-IS area authentication. The password is a string of characters.
If the IS-IS area authentication mode is simple, the password is a string of 0 to 16 characters.
If the IS-IS area authentication mode is MD5, the password is a string of 0 to 392 characters.
If the IS-IS area authentication mode is keychain, the name is a string of 0 to 47 characters.
The length 0 indicates that no IS-IS area authentication password is configured.
When read, it always returns length 0.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.5 |
hwIsisProcAreaAuthPacketAuthModeThe value of this object identifies the packet authentication mode of IS-IS area authentication:
none (0): Authentication mode is not configured.
authenticateall (1): Encapsulates authentication information for both transmitted and received LSPs and SNPs.
allsendonly (2): Encapsulates authentication information for both generated LSPs and SNPs; does not authenticate received LSPs or SNPs.
snppacketauthenticationavoid (3): Encapsulates authentication information for only generated LSPs and authenticates received LSPs.
snppacketsendonly (4): Encapsulates authentication information for generated LSPs and SNPs; authenticates only received LSPs but does not authenticate received SNPs.
By default, authentication is not configured.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.6 |
hwIsisProcAreaAuthCodeThe value of this object identifies the code of area authentication.
none (0): The authentication code is not configured.
osi (10): indicates OSI authentication.
ip (133): indicates IP authentication.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.7 |
hwIsisProcDomainAuthTypeThe value of this object identifies the type of IS-IS router domain authentication.
null (0): Domain authentication is not configured.
md5 (1): The password is sent after being encrypted through MD5.
simple (2): The password is sent in the form of simple text.
keychain (3): The key chain table that changes with time is sent after being encrypted through MD5.
By default, IS-IS route domain authentication is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.8 |
hwIsisProcDomainAuthPasswordNameThis object indicates the password of IS-IS routing domain authentication. The password is a string of characters.
If the IS-IS routing domain authentication mode is simple, the password is a string of 0 to 16 characters.
If the IS-IS routing domain authentication mode is MD5, the password is a string of 0 to 392 characters.
If the IS-IS routing domain authentication mode is keychain, the name is a string of 0 to 47 characters.
The length 0 indicates that the password of IS-IS routing domain authentication is not configured.
When read, it always returns length 0.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.9 |
hwIsisProcDomainAuthPacketAuthModeThe value of this object identifies the packet authentication mode of IS-IS route domain authentication.
none (0): Authentication mode is not configured.
authenticateall (1): Encapsulates authentication information for both transmitted and received LSPs and SNPs.
allsendonly (2): Encapsulates authentication information for both generated LSPs and SNPs; does not authenticate received LSPs or SNPs.
snppacketauthenticationavoid (3): Encapsulates authentication information for only generated LSPs and authenticates received LSPs.
snppacketsendonly (4): Encapsulates authentication information for generated LSPs and SNPs; authenticates only received LSPs but does not authenticate received SNPs.
By default, authentication is not configured.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.10 |
hwIsisProcDomainAuthCodeThe value of this object identifies the code of domain authentication.
none (0): The authentication code is not configured.
osi (10): indicates OSI authentication.
ip (133): indicates IP authentication.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.11 |
hwIsisProcLevelThe value of this object identifies the level of the IS-IS process.
level1 (1): indicates level 1.
level2 (2): indicates level 2.
level12 (3): indicates level 1-2.
By default, the level of an IS-IS process is level-1-2.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.12 |
hwIsisProcL1FlashFloodCountThe value of this object identifies the counter of level-1 LSPs on the interface.
The value is an integer ranging from 0 to 15. The value 0 indicates that no counter is configured. The default value is 5.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.13 |
hwIsisProcL1FlashFloodIntervalThe value of this object identifies the intervals for level-1 LSP flooding.
The value ranges from 10 to 50000, in milliseconds. The default value is 10 ms.rw Integer32 (0 | 10..50000) UNITS "millionseconds" .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.14 |
hwIsisProcL2FlashFloodCountThe value of this object identifies the counter of level-2 LSPs on the interface.
The value is an integer ranging from 0 to 15. The value 0 indicates that no counter is configured. The default value is 5.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.15 |
hwIsisProcL2FlashFloodIntervalThe value of this object identifies the intervals for level-2 LSP flooding.
The value ranges from 10 to 50000 in milliseconds. The default value is 10ms.rw Integer32 (0 | 10..50000) UNITS "millionseconds" .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.16 |
hwIsisProcLogPeerChangeGenerates a log when the status of the peer changes.
null (0): not configured
enabledwithouttopology (1): IPv4 topology
enabledwithtopology (2): IPv6 topologyrw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.17 |
hwIsisProcTimerRefreshThe value of this object identifies the timer of LSP refreshing. The value ranges from 1 to 65534, in seconds. The default value is 900s.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.18 |
hwIsisProcTimerMaxAgeThe value of this object identifies the maximum Keepalive time of the LSP. The value ranges from 2 to 65535, in seconds. The default value is 1200s.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.19 |
hwIsisProcL1TimerLspGenMaxIntervalThe value of this object identifies the timer for the maximum delay of level-1 LSPs with the same LSP ID.
The value ranges from 1 to 120, in seconds. By default, the value is 2s.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.20 |
hwIsisProcL1TimerLspGenInitIntervalThe value of this object identifies the delay timer that initially triggers a level-1 LSP.
The value ranges from 0 to 60000, in milliseconds.
By default, the value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.21 |
hwIsisProcL1TimerLspGenIncrIntervalThe value of this object identifies the delay timer for generating two level-1 LSPs with the same LSP ID.
The value ranges from 1 to 60000, in milliseconds.
By default, the value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.22 |
hwIsisProcL2TimerLspGenMaxIntervalThe value of this object identifies the timer for the maximum delay of Level-2 LSPs with the same LSP ID.
The value ranges from 1 to 120, in seconds. By default, the value is 2s.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.23 |
hwIsisProcL2TimerLspGenInitIntervalThe value of this object identifies the delay timer that initially triggers a Level-2 LSP. The value ranges from 1 to 60000, in milliseconds.
By default, the value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.24 |
hwIsisProcL2TimerLspGenIncrIntervalThe value of this object identifies the delay timer for generating two Level-2 LSPs with the same LSP ID.
The value ranges from 1 to 60000, in milliseconds.
By default, the value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.25 |
hwIsisProcTimerSPFMaxIntervalThe value of this object identifies the maximum intervals for SPF calculation.
The value ranges from 1 to 120, in seconds. By default, the value is 5s.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.26 |
hwIsisProcTimerSPFInitIntervalThe value of this object identifies the delay timer for initial SPF calculation.
The value ranges from 1 to 60000, in milliseconds. By default, the interval is 50ms.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.27 |
hwIsisProcTimerSPFIncrIntervalThe value of this object identifies the incremental delay timer for two SPF calculations.
The value ranges from 1 to 60000, in milliseconds. By default, the interval is 200ms.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.28 |
hwIsisProcCostStyleConfigures the cost type of the IS-IS process:
narrow (1): the narrow type
narrowcompatible (2): the narrow-compatible type
compatible (3): compatible type
wide (4): wide type
widecompatible (5): wide-compatible type
narrowcompatiblerelax (6): narrow-compatible relax-spf-limit type
compatible-relax (7): compatible relax-spf-limit type
By default, the cost type of an IS-IS process is narrow.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.29 |
hwIsisProcDynamicNameConfigures the name of the IS-IS dynamic host. The value is a string of 1 to 64 characters.
When the length is 0, the configured IS-IS dynamic host name is deleted.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.30 |
hwIsisProcGREnabledWhether to enable IS-IS GR.
true (1): enables IS-IS GR.
false (2): does not enable IS-IS GR.
By default, IS-IS GR is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.31 |
hwIsisProcGRIntervalThe value of this object identifies the maximum intervals for enabling GR.
The value ranges from 0 to 1800, in seconds. By default, the value is 300 seconds.
The value 0 indicates that GR is not configured.rw Integer32 (0 | 30..1800) UNITS "seconds" .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.32 |
hwIsisProcGRSuppresSAEnabledThis object indicates that the SA bit in the sent Hello packet is set to 1 after the GR-enabled device is started:
true (1): enables this function.
false (2): disables this function.
By default, IS-IS does not suppress Hello PDUs from carrying SA bits.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.33 |
hwIsisProcTEEnableLevelEnables IS-IS TE.
none (0): does not enable IS-IS TE.
level1 (1): enables level-1 TE.
level2 (2): enables level-2 TE.
level12 (3): enables level-1-2 TE.
By default, IS-IS TE is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.34 |
hwIsisProcBFDEnabledWhether to enable BFD on each interface.
true (1): enables BFD on each interface.
false (2): does not enable BFD on each interface.
By default, BFD is disabled on each interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.35 |
hwIsisProcBFDFrrBindEnabledEnables BFD-FRR binding on each interface.
true (1): enables BFD-FRR binding on each interface.
false (2): does not enable BFD-FRR binding on each interface.
By default, BFD-FRR binding is disabled on each interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.36 |
hwIsisProcBFDMinTxIntervalThe value of this object identifies the minimum interval for sending BFD packets.
If isis binding to vpn and ipv4-family not enable, The value is zero.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.37 |
hwIsisProcBFDMinRecvIntevalThe value of this object identifies the minimum interval for receiving BFD packets.
If isis binding to vpn and ipv4-family not enable, The value is zero.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.38 |
hwIsisProcBFDMultiplierThe value of this object identifies the local detection multiplier. The value ranges from 1 to 255.
If isis binding to vpn and ipv4-family not enable, The value is zero.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.39 |
hwIsisProcIPv6EnableTopologyTypeThis objects indicates whether the IPv6 topology is enabled for the IS-IS process:
disable(0): disables the IPv6 topology of the IS-IS process.
standard(1): specifies the topology type as the standard mode.
ipv6(2): enables IPv6 for the IS-IS process in the IPv6 topology.
compatible(3): specifies the topology type as the compatible mode.
compatibleenablemtspf(4): indicates that SPF calculation is performed in the IPv6 topology in compatible mode.
By default, the IPv6 topology is not enabled for the IS-IS process.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.40 |
hwIsisProcRowStatusThis object supports settings of two values.
createAndGo(4): A row is created.
destroy(6): A row is deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.41 |
hwIsisProcOptionalChecksumEnabledEnables BFD-FRR binding on each interface.
true (1): enables optional checksum for CSNP,PSNP and IIH PDU.
false (2): disables optional checksum for CSNP,PSNP and IIH PDU.
By default, optional checksum is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.42 |
hwisisProcLsdbMaxLimitThis object is used to set the maximum limit number of IS-IS LSPs.
The value range is from 0 to 500000.
The default value 0 means no limit.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.43 |
hwIsisProcLsdbUpperThresholdThis object is used to set the upper threshold value of LSPs limit.
The value range is from 1 to 100.
The default means 80.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.44 |
hwIsisProcLsdbLowerThresholdThis object is used to set the lower threshold value of LSPs limit.
The value range is from 1 to 100.
The default means 70.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.45 |
hwIsisProcLsdbTotalThis object is used to get the number of IS-IS LSPs.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.46 |
hwIsisProcAreaAuthKeychainNameThis object indicates the keychain name of IS-IS area authentication. The name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that no IS-IS area authentication keychain name is configured.
When read, it returns the keychain name.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.47 |
hwIsisProcDomainAuthKeychainNameThis object indicates the keychain name of IS-IS domain authentication. The name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that no IS-IS domain authentication keychain name is configured.
When read, it returns the keychain name.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.1.1.48 |
hwIsisNETTableSet of network entities of process. SEQUENCE OF HwIsisNETEntry .1.3.6.1.4.1.2011.5.25.24.2.1.2 |
hwIsisNETEntryEach row means one network entity of the process. HwIsisNETEntry .1.3.6.1.4.1.2011.5.25.24.2.1.2.1 |
hwIsisNETIndexThe value of this object identifies the NET index. It is a string of 8 to 20 bytes. OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.2.1.1 |
hwIsisNETStatusThe value of this object identifies the status of the NET table.
createAndGo(4): A row is created.
destroy(6): A row is deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.2.1.2 |
hwIsisProcMTExtTableSet of commands of the integrated IS-IS protocol existing on the system,
which are different for IP type and MT. SEQUENCE OF HwIsisProcMTExtEntry .1.3.6.1.4.1.2011.5.25.24.2.1.3 |
hwIsisProcMTExtEntryEach row defines some commands specific to a single process of the IS-IS protocol existing on the system.
These commands are different from ProcBaseTable for IP type and MT. HwIsisProcMTExtEntry .1.3.6.1.4.1.2011.5.25.24.2.1.3.1 |
hwIsisIpTypeIndexThis object indicates the IP protocol type:
ipv4(1): indicates IPv4.
ipv6(2): indicates IPv6. InetAddressType .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.1 |
hwIsisMTIdIndexThe value of this object identifies the MT ID. Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.2 |
hwIsisMTNameThis object indicates the name of the topology to be bound to an IS-IS process. The value is a string of 1 to 31 characters.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.3 |
hwIsisProcDefRoutAdvTypeThis object is used to set the mode in which default routes are advertised:
null(0): indicates that default routes are not advertised.
always(1): indicates that default routes are always advertised.
matchdefault(2): If there is the default route that is generated by another routing protocol or another IS-IS process in the routing table, this default route is advertised in an LSP. If this default route is deleted from the routing table, this default route is not advertised in the LSP.
routepolicy(3): indicates that default routes are advertised according to the routing policy.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.4 |
hwIsisProcDefRoutAdvPolicyNameThis object indicates the routing policy name.
The name is a string of 0 to 40 characters.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.5 |
hwIsisProcDefRoutAdvCostThis object is used to set the cost of a default route.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.6 |
hwIsisProcDefRoutAdvTagThis object is used to set the administrative tag of a default route.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.7 |
hwIsisProcDefRoutAdvLevelThis object is used to set the level of a default route:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
By default, the level of a default route is Level-2.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.8 |
hwIsisProcDefRoutAdvAvoidLearnEnabledThis object indicates whether an IS-IS process is prevented from learning default routes or adding them to the routing table:
true(1): indicates that an IS-IS process is prevented from learning default routes or adding them to the routing table.
false(2): indicates that an IS-IS process can learn default routes and then add them to the routing table.
By default, an IS-IS process can learn default routes and then add them to the routing table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.9 |
hwIsisProcL1CircuitCostGlobal level-1 cost for all the interfaces.
If the costStyle of the process is wide or widecompatible, the range of this value is from 1 to 16777215, else the range of this value is from 1 to 63.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.10 |
hwIsisProcL2CircuitCostGlobal level-2 cost for all the interfaces.
If the costStyle of the process is wide or widecompatible, the range of this value is from 1 to 16777215, else the range of this value is from 1 to 63.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.11 |
hwIsisProcPrefValueThis object is used to set the preference of an IS-IS route. The value ranges from 1 to 255, and the default value is 15.
If isis binding to vpn and ip-family not enable, The value is zero.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.12 |
hwIsisProcPrefPolicyNameThis object indicates the name of the routing policy used for route filtering. The name is a string of 0 to 40 characters.
Zero-length means no configuration.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.13 |
hwIsisProcMaxLoadBalanceThis object is used to set the number of equal-cost routes.
The range and the default value depend on license.
If isis binding to vpn and ip-family not enable, The value is zero.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.14 |
hwIsisProcL1CircuitDefaultTagThis object is used to set the default administrative tag of an IS-IS Level-1 route.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.15 |
hwIsisProcL2CircuitDefaultTagThis object is used to set the default administrative tag of an IS-IS Level-2 route.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.16 |
hwIsisProcBandWidthReferenceThis object is used to set the reference bandwidth.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.17 |
hwIsisProcAutoCostEnabledThis object indicates whether automatic interface cost calculation is enabled:
true(1): indicates that automatic interface cost calculation is enabled.
false(2): indicates that automatic interface cost calculation is disabled.
By default, automatic interface cost calculation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.18 |
hwIsisProcSetOverLoadThis object indicates whether a device is enabled to notify its neighbors that its status is Overload:
disable (0): indicates that a device is disabled from notifying its neighbors that its status is Overload.
enable(1): indicates that a device is enabled to notify its neighbors that its status is Overload.
onstartup(2): When a device is restarted or becomes faulty, it notifies its neighbors that its status is Overload.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.19 |
hwIsisProcSetOverLoadAllowRouteThis object indicates that the type of routes to be advertised when a device is in the Overload state:
null(0): indicates that no route type is specified.
external(1): indicates the imported external routes.
interlevel(2): indicates the leak routes.
externalandinterlevel(3): indicates the imported external and leak routes.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.20 |
hwIsisProcOnStartIntervalThe value of this object identifies the interval for waiting to clear the overload bit after the system is started.
The value ranges from 5 to 86400, in seconds. The default value is 600s.rw Integer32 (0 | 5..86400) UNITS "seconds" .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.21 |
hwIsisProcOnStartStartFromPeerThis object indicates the system ID of a neighbor.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.22 |
hwIsisProcOnStartFromPeerIntervalThe value of this object identifies the maximum interval for waiting to clear the
overload bit after the system is started and the neighbor relationship is established.
The value ranges of set is from 5 to 86400, in seconds. The default value is 1200s.
0 means no configuration.rw Integer32 (0 | 5..86400) UNITS "seconds" .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.23 |
hwIsisProcOnStartWaitForBgpEnabledThis object indicates whether the function of waiting for BGP convergence is enabled:
true(1): indicates that the function of waiting for BGP convergence is enabled.
false(2): indicates that the function of waiting for BGP convergence is disabled.
By default, the function of waiting for BGP convergence is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.24 |
hwIsisProcMTStatusThis object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.25 |
hwIsisProcL1RedistMaxLimitThis object is used to set the maximum limit number of IS-IS Level-1 redistribute routes advertised in LSPs.
The value range is from 0 to 10000000.
The default value 0 means no limit.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.26 |
hwIsisProcL2RedistMaxLimitThis object is used to set the maximum limit number of IS-IS Level-2 redistribute routes advertised in LSPs.
The value range is from 0 to 10000000.
The default value 0 means no limit.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.27 |
hwIsisProcL1UpperRedistThresholdThis object is used to set the upper threshold value of level-1 import limit.
The value range is from 1 to 100.
The default means 80.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.28 |
hwIsisProcL2UpperRedistThresholdThis object is used to set the upper threshold value of level-2 import limit.
The value range is from 1 to 100.
The default means 80.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.29 |
hwIsisProcL1LowerRedistThresholdThis object is used to set the lower threshold value of level-1 import limit.
The value range is from 1 to 100.
The default means 70.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.30 |
hwIsisProcL2LowerRedistThresholdThis object is used to set the lower threshold value of level-2 import limit.
The value range is from 1 to 100
The default means 70.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.31 |
hwIsisProcL1TotalRedistThis object is used to get the number of level-1 import routes.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.32 |
hwIsisProcL2TotalRedistThis object is used to get the number of level-2 import routes.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.3.1.33 |
hwIsisPrefixPriorityTableSet of commands of priority-based convergence. SEQUENCE OF HwIsisPrefixPriorityEntry .1.3.6.1.4.1.2011.5.25.24.2.1.4 |
hwIsisPrefixPriorityEntryEntry of priority-based convergence, each entry means one priority-based command for IS-IS process. HwIsisPrefixPriorityEntry .1.3.6.1.4.1.2011.5.25.24.2.1.4.1 |
hwIsisPrefixPriorityTypeIndexThis object indicates the preference of a route:
medium(1): indicates medium.
high(2): indicates high.
critical(3): indicates critical. Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.1 |
hwIsisPrefixPriorityL1PolicyTypeThis object indicates the type of a Level-1 route preference policy:
none(0): indicates that no policy type is specified.
prefix(1): indicates the IP prefix policy.
tag(2): indicates the administrative tag policy.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.2 |
hwIsisPrefixPriorityL2PolicyTypeThis object indicates the type of a Level-2 route preference policy:
none(0): indicates that no policy type is specified.
prefix(1): indicates the IP prefix policy.
tag(2): indicates the administrative tag policy.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.3 |
hwIsisPrefixPriorityL1IpPrefixNameThis object indicates the name of a Level-1 IP prefix policy.
The name is a string of 0 to 169 characters.
Zero-length means no configuration.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.4 |
hwIsisPrefixPriorityL2IpPrefixNameThis object indicates the name of a Level-2 IP prefix policy.
The name is a string of 0 to 169 characters.
Zero-length means no configuration.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.5 |
hwIsisPrefixPriorityL1TagValueThis object indicates the administrative tag of the Level-1 route preference.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.6 |
hwIsisPrefixPriorityL2TagValueThis object indicates the administrative tag of the Level-2 route preference.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.4.1.7 |
hwIsisSummaryTableSet of IP summary addresses to use. SEQUENCE OF HwIsisSummaryEntry .1.3.6.1.4.1.2011.5.25.24.2.1.5 |
hwIsisSummaryEntryEach entry contains one IP summary address. HwIsisSummaryEntry .1.3.6.1.4.1.2011.5.25.24.2.1.5.1 |
hwIsisSummaryIPIndexThis object indicates the IP address of the summarized route. InetAddress .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.1 |
hwIsisSummaryMaskIndexThis object indicates the subnet mask of the summarized route. InetAddressPrefixLength .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.2 |
hwIsisSummaryAvoidFeedBackEnabledThis object indicates whether the function of avoiding learning the summarized routes through SPF calculation is enabled:
true(1): indicates that the function is enabled.
false(2): indicates that the function is disabled.
By default, the summarized routes can be learned through SPF calculation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.3 |
hwIsisSummaryGenNull0RouteEnabledThis object indicates whether the function of generating Null0 routes during route summarization is enabled:
true(1): indicates that the function is enabled.
false(2): indicates that the function is disabled.
By default, the function of generating Null0 routes during route summarization is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.4 |
hwIsisSummaryLevelThis object indicates the level of the summarized route:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.5 |
hwIsisSummaryTagThis object indicates the administrative tag of the summarized route.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.6 |
hwIsisSummaryStatusThis object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.5.1.7 |
hwIsisImportRouteTableSet of import route command. SEQUENCE OF HwIsisImportRouteEntry .1.3.6.1.4.1.2011.5.25.24.2.1.6 |
hwIsisImportRouteEntryEntry of import route command. HwIsisImportRouteEntry .1.3.6.1.4.1.2011.5.25.24.2.1.6.1 |
hwIsisImportProtocolIndexThis object indicates the routing protocol of the imported routes:
direct(1): indicates direct.
static(2): indicates static.
rip(3): indicates RIP.
ospf(4): indicates OSPF
isis(5): indicates IS-IS.
bgp(6): For VPN instance, indicates EBGP and IBGP, otherwise indicates EBGP.
ospfv3(7): indicates OSPFv3.
ripng(8): indicates RIPng.
bgpIbgp(9): For VPN instance, this is unusable, otherwise indicates IBGP and EBGP. Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.1 |
hwIsisImportProcessIdIndexProcess ID of the route protocols. The range is from 1 to 65535.
If the protocol is direct, static or bgp, this value can only be 1. Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.2 |
hwIsisImportInheritCostEnabledThis object indicates whether the original cost of the source route is inherited:
true(1): indicates that the original cost of the source route is inherited.
false(2): indicates that the original cost of the source route is not inherited.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.3 |
hwIsisImportCostCost of the imported routes.
If the costStyle of the process is wide or widecompatible,
the range of this value is from 0 to 4261412864,
else the range of this value is from 0 to 63. 0 means no configuration.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.4 |
hwIsisImportCostTypeThis object indicates the cost type of the imported external route. This object does not apply to IPv6.
internal(1): indicates internal.
external(2): indicates external.
This node is invalid for IPv6. By default, the cost type of the imported external route is external.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.5 |
hwIsisImportLevelThis object indicates the local IS-IS level of the imported route:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.6 |
hwIsisImportTagThis object indicates the administrative tag assigned to an imported route.
If this object is not configured, the value will be 0.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.7 |
hwIsisImportPolicyNameThis object indicates the name of the routing policy used to import routes.
The name is a string of 0 to 40 characters.
The length 0 indicates that no name is configured for the routing policy used to import routes.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.8 |
hwIsisImportRouteStatusThis object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.6.1.9 |
hwIsisRouteLeakTableSet of route leak commands. SEQUENCE OF HwIsisRouteLeakEntry .1.3.6.1.4.1.2011.5.25.24.2.1.7 |
hwIsisRouteLeakEntryEntry of route leak commands. HwIsisRouteLeakEntry .1.3.6.1.4.1.2011.5.25.24.2.1.7.1 |
hwIsisRouteLeakTypeIndexThis object indicates the index of the route leaking type:
level1intolevel2(1): indicates that Level-1 routes are leaked to Level-2.
level2intolevel1(2): indicates that Level-2 routes are leaked to Level-1. Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.1 |
hwIsisRouteLeakTagThis object indicates the tag of route leaking.
If the tag is not configured, the reading value will be 0.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.2 |
hwIsisRouteLeakFilterPolicyTypeThis object indicates the type of the policy used for route leaking:
none(0): indicates that no policy type is specified.
basicAcl(1): indicates the number of a basic ACL.
aclName(2): indicates the ACL name.
ipPrefix(3): indicates the IPv4 prefix.
routePolicy(4): indicates the routing policy.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.3 |
hwIsisRouteLeakFilterPolicyBasicAclThe value of this object identifies the number of a basic ACL.
The value ranges from 2000 to 2999.
0 means no configuration, The range of this value is from 2000 to 2999.rw Integer32 (0 | 2000..2999) .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.4 |
hwIsisRouteLeakFilterPolicyPolicyNameThe policy name of route leak. If policy type is aclName, the length of this value is from 1 to 32.
If policy type is ipPrefix
the length of this value is from 1 to 169.
If policy type is routePolicy, the length of this value is from 1 to 40.
The default length is 0.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.5 |
hwIsisRouteLeakStatusThis object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.7.1.6 |
hwIsisFrrTableSet of Frr commands. SEQUENCE OF HwIsisFrrEntry .1.3.6.1.4.1.2011.5.25.24.2.1.8 |
hwIsisFrrEntryEntry of frr commands for the specific MT of process. HwIsisFrrEntry .1.3.6.1.4.1.2011.5.25.24.2.1.8.1 |
hwIsisFrrPolicyNameThe value of this object identifies the FRR policy name.
The value is a string of 1 to 40 characters. Value 0 indicates that the FRR policy is deleted.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.8.1.1 |
hwIsisFrrLoopFreeAltLevelThe value of this object identifies the level of the FRR LFA algorithm.
null(0): cancels the operation of the LFA algorithm.
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.8.1.2 |
hwIsisFrrEnabledThe value of this object identifies the status of FRR:
enable(1): enables FRR.
disable(2): disables FRR.
By default, FRR is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.8.1.3 |
hwIsisIntfBaseTableSet of commands on interface of the Integrated IS-IS protocol existing on the system. SEQUENCE OF HwIsisIntfBaseEntry .1.3.6.1.4.1.2011.5.25.24.2.1.21 |
hwIsisIntfBaseEntryEach row defines some commands to a single interface of the IS-IS protocol existing on the system. HwIsisIntfBaseEntry .1.3.6.1.4.1.2011.5.25.24.2.1.21.1 |
hwIsisInterfaceIndexThe value of this object identifies the interface index. Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.1 |
hwIsisEnableIPProtocolThe value of this object identifies the status of IPv4 IS-IS on an interface:
enable(1): enables IPv4 IS-IS.
disable(2): disables IPv4 IS-IS.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.2 |
hwIsisEnableIPv6ProtocolThe value of this object identifies the status of IPv6 IS-IS on an interface:
enable(1): enables IPv6 IS-IS.
disable(2): disables IPv6 IS-IS.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.3 |
hwIsisCircLevelThe value of this object identifies the level of an interface:
level1(1): indicates Level-1.
level2(2): indicates Level-2.
level12(3): indicates Level-1-2.
By default, the interface is at Level-1-2.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.4 |
hwIsisCircSimulationThe value of this object identifies whether the broadcast interface is simulated as a P2P interface:
enable(1): indicates that the broadcast interface is simulated as a P2P interface.
disable(2): indicates that the broadcast interface is not simulated as a P2P interface.
By default, broadcast interfaces are not simulated as P2P interfaces.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.5 |
hwIsisCircL1HelloIntervalThe value of this object identifies the interval for sending Level-1 Hello PDUs.
The value ranges from 3 to 255, in seconds. By default, the value is 10s.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.6 |
hwIsisCircL2HelloIntervalThe value of this object identifies the interval for sending Level-2 Hello PDUs.
The value ranges from 3 to 255, in seconds. By default, the value is 10s.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.7 |
hwIsisCircL1HelloMultiplierThe value of this object identifies the number of Level-1 Hello PDUs that fail to received from the IS-IS neighbor before the neighbor declared Down.
The value ranges from 3 to 1000. By default, the value is 3.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.8 |
hwIsisCircL2HelloMultiplierThe value of this object identifies the number of Level-2 Hello PDUs that fail to received from the IS-IS neighbor before the neighbor declared Down.
The value ranges from 3 to 1000. By default, the value is 3.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.9 |
hwIsisCircL1AuthModeThe value of this object identifies the mode of authenticating Level-1 Hello PDUs:
null(0): indicates that area-based authentication is not configured.
md5(1): indicates that the password is encrypted through MD5 and then sent.
simple(2): indicates that the password is sent in plaintext.
keychain(3): indicates that the key-chain that varies with the time is encrypted through MD5 and then sent.
By default, area-based authentication is not configured.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.10 |
hwIsisCircL1AuthTextThe value of this object identifies the authentication password of Level-1 Hello packets. The password is a string of characters.
If the packet authentication mode is simple, the password is a string of 0 to 16 characters.
If the packet authentication mode is MD5, the password is a string of 0 to 392 characters.
If the packet authentication mode is keychain, the name is a string of 0 to 47 characters.
The length 0 indicates that the authentication password of Level-1 Hello packets is not configured.
When read, it always returns length 0.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.11 |
hwIsisCircL1AuthSendOnlyThe value of this object identifies the mode of sending the authentication password of Level-1 Hello PDUs:
true(1): indicates that the passwords in only the sent PDUs are authenticated but not in the received PDUs.
false(2): indicates that the passwords in both sent and received PDUs are authenticated.
By default, the passwords in both sent and received PDUs are authenticated.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.12 |
hwIsisCircL1AuthCodeThe value of this object identifies the authentication code of Level-1 Hello PDUs:
none(0): indicates that no authentication is configured.
osi(10): indicates OSI authentication.
ip(133): indicates IP authentication.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.13 |
hwIsisCircL2AuthModeThe value of this object identifies the mode of authenticating Level-2 Hello PDUs:
null(0): indicates that area-based authentication is not configured.
md5(1): indicates that password is encrypted through MD5 and then sent.
simple(2): indicates that the password is sent in plaintext.
keychain(3): indicates that the key-chain that varies with the time is encrypted through MD5 and then sent.
By default, area-based authentication is not configured.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.14 |
hwIsisCircL2AuthTextThe value of this object identifies the authentication password of Level-2 Hello packets. The password is a string of characters.
If the packet authentication mode is simple, the password is a string of 0 to 16 characters.
If the packet authentication mode is MD5, the password is a string of 0 to 392 characters.
If the packet authentication mode is keychain, the name is a string of 0 to 47 characters.
The length 0 indicates that the authentication password of Level-2 Hello packets is not configured.
When read, it always returns length 0.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.15 |
hwIsisCircL2AuthSendOnlyThe value of this object identifies the mode of sending the authentication password of Level-2 Hello PDUs:
true(1): indicates that the passwords in only the sent PDUs are authenticated but not in the received PDUs.
false(2): indicates that the password is authenticated in the PDUs that are both sent and received.
By default, the passwords in both sent and received PDUs are authenticated.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.16 |
hwIsisCircL2AuthCodeThe value of this object identifies the authentication code of Level-2 Hello PDUs:
none(0): indicates that no authentication is configured.
osi(10): indicates OSI authentication.
ip(133): indicates IP authentication.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.17 |
hwIsisCircLdpSyncThe value of this object identifies the status of synchronization of IS-IS and LDP:
enable(1): enables synchronization of IS-IS and LDP.
disable(2): disables synchronization of IS-IS and LDP.
By default, synchronization of IS-IS and LDP is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.18 |
hwIsisCircLdpSyncHoldDownThe value of this object identifies the timeout period of the Holddown time for synchronization of IS-IS and LDP.
The value ranges from 0 to 65535, in seconds. By default, the value is 10s. 0 means to stop Holddown timer.
-1 means no configuration.rw Integer32 (-1..65535) .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.19 |
hwIsisCircLdpHldMaxCostThe value of this object identifies the timeout period of the Hold-Max-Cost time for synchronization of IS-IS and LDP.
The value ranges from 0 to 65536, in seconds.
By default, the value is 10s. The value of 65536 means infinite. 0 means to stop Hold-Max-Cost timer. -1 means no configuration.rw Integer32 (-1..65536) .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.20 |
hwIsisCircSmallHelloThe value of this object identifies whether IS-IS sends small Hello PDUs without the padding field:
enable(1): indicates that IS-IS sends small Hello PDUs without the padding field.
disable(2): indicates that IS-IS does not send small Hello PDUs without the padding field.
By default, the function is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.21 |
hwIsisCircIpIgnoreThe value of this object identifies whether the segment in an IP address is checked:
enable(1): indicates that the segment in an IP address is not checked.
disable(2): indicates that the segment in an IP address is checked.
By default, the segment in an IP address is checked.
This object applies to only P2P interfaces.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.22 |
hwIsisCircSenseRprThe value of this object identifies whether fast RPR loop detection is enabled:
enable(1): enables fast RPR loop detection.
disable(2): disables fast RPR loop detection.
By default, fast RPR loop detection is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.23 |
hwIsisCircPadHelloThe value of this object identifies whether IS-IS sends standard Hello PDUs with the padding field:
enable(1): indicates that IS-IS sends standard Hello PDUs with the padding field.
disable(2): indicates that IS-IS does not send standard Hello PDUs with the padding field.
By default, the function is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.24 |
hwIsisCircLspRetransIntervalThe value of this object identifies the interval for resending LSPs.
The value ranges from 1 to 300, in seconds. The default value is 5.
This object applies to only P2P interfaces.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.25 |
hwIsisL1CsnpTimerValueThe value of this object identifies the interval for sending Level-1 CSNP PDUs on an interface.
The value ranges from 1 to 65535, in seconds. The default value is 10.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.26 |
hwIsisL2CsnpTimerValueThe value of this object identifies the interval for sending Level-2 CSNP PDUs on an interface.
The value ranges from 1 to 65535, in seconds. The default value is 10.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.27 |
hwIsisLspThrottleIntervalThe value of this object identifies the interval for sending batch of LSPs or CSNPs on an interface. The value ranges from 1 to 10000, in milliseconds.
By default, the value is 50.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.28 |
hwIsisLspThrottleCountThe value of this object identifies the number of a bundle of LSPs. The value ranges from 1 to 1000.
By default, it is 10.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.29 |
hwIsisCircL1DisPriorityThe value of this object identifies the priority of the Level-1 DIS, which is valid only on a broadcast interface.
The value ranges from 0 to 127. By default, it is 64.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.30 |
hwIsisCircL2DisPriorityThe value of this object identifies the priority of the Level-2 DIS, which is valid only on a broadcast interface.
The value ranges from 0 to 127. By default, it is 64.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.31 |
hwIsisCircSilentThe value of this object identifies whether the status of an IS-IS interface is set to silent.
enable(1): indicates that the status of IS-IS interface is set to silent.
disable(2): indicates that the status of IS-IS interface is not set to silent.
By default, the function is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.32 |
hwIsisCircMeshGroupThe value of this object identifies the mesh-group ID. The value ranges from 0 to 4294967295. Value 0 indicates that the mesh-group ID is not set.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.33 |
hwIsisCircMeshBlockThe value of this object identifies the mesh block function. If this function is configured, the set mesh-group ID is deleted. The value of this object can be:
enable(1): enables the mesh block function.
disable(2): disables the mesh block function.
By default, the function is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34 |
hwIsisCircDisNameThe value of this object identifies the DIS name of an interface.
The configuration is applicable to only a broadcast interface. The value is a string of 0 to 64 characters.
Value 0 indicates that the DIS name is not configured.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.35 |
hwIsisCircPppNegoThe value of this object identifies the mode of negotiating the setup of a neighbor relationship on P2P interfaces:
none(0): indicates that the negotiation mode used to establish a neighbor relationship is not specified.
twoWay(1): indicates that a neighbor relationship is set up through negotiations in two-way handshake mode.
threeWay(2): indicates that a neighbor relationship is set up through negotiations in three-way handshake mode.
threeWayOnly(3): indicates that a neighbor relationship is set up through negotiations in three-way handshake mode and the backward compatibility is not supported.
By default, a neighbor relationship is set up through negotiations in three-way handshake mode.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.36 |
hwIsisCircPppOsicpCheckThe value of this object identifies whether the OSICP check is required:
enable(1): enables the OSICP check.
disable(2): disables the OSICP check.
By default, the function is disabled.
This object applies to only P2P interfaces.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.37 |
hwIsisIntfRowStatusThe value of this object identifies the setting of two values:
createAndGo(4): creates one row.
destroy(6): deletes one row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.38 |
hwIsisCircL1AuthKeychainNameThe value of this object identifies the keychain name of Level-1 Hello packets. The keychain name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that the authentication password of Level-1 Hello packets is not configured.
When read, it returns the keychain name.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.39 |
hwIsisCircL2AuthKeychainNameThe value of this object identifies the keychain name of Level-2 Hello packets. The keychain name is a string of characters.
The name is a string of 0 to 47 characters. The length 0 indicates that the authentication password of Level-2 Hello packets is not configured.
When read, it returns the keychain name.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.40 |
hwIsisCircStrictSnpaCheckEnableThe value of this object identifies whether the snpa check of lsp and snp is required.
enable(1): enables the snpa check.
disable(2): disables the snpa check.
By default, the function is disabled.
This object applies to only simulated P2P interfaces.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.21.1.41 |
hwIsisIntfExtTableSet of some specific commands on interface of the Integrated IS-IS protocol existing on the system, which are different of IP type. SEQUENCE OF HwIsisIntfExtEntry .1.3.6.1.4.1.2011.5.25.24.2.1.22 |
hwIsisIntfExtEntryEntry of Some specific commands on interface of the Integrated IS-IS protocol existing on the system, which are different of IP type. HwIsisIntfExtEntry .1.3.6.1.4.1.2011.5.25.24.2.1.22.1 |
hwIsisCircL1CostThe value of this object identifies the Level-1 cost of an interface.
If the cost style is wide or widecompatible, the range of this value is from 0 to 16777215,
else the range of this value is from 0 to 63.
The value of 0 means undo this configuration, and the cost of the circuit will become the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.1 |
hwIsisCircL2CostThe value of this object identifies the Level-2 cost of an interface.
If the cost style is wide or widecompatible, the range of this value is from 0 to 16777215,
else the range of this value is from 0 to 63.
The value of 0 means undo this configuration, and the cost of the circuit will become the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.2 |
hwIsisL1TagValueThe value of this object identifies the tag value of a Level-1 interface.
The value ranges from 0 to 4294967295. By default, it is 0, which indicates that the set tag value is deleted.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.3 |
hwIsisL2TagValueThe value of this object identifies the tag value of a Level-2 interface.
The value ranges from 0 to 4294967295. By default, it is 0, which indicates that the set tag value is deleted.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.4 |
hwIsisCircSuppReachablityThe value of this object identifies whether the advertisement of the interface address is suppressed:
Null(0): indicates that the interface address can be advertised.
level1(1): indicates that the advertisement of the Level-1 interface address is suppressed.
level2(2): indicates that the advertisement of the Level-2 interface address is suppressed.
level12(3): indicates that the advertisement of the Level-1 and Level-2 interface addresses is suppressed.
By default, the interface address can be advertised.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.5 |
hwIsisCircFrrBackupThe value of this object identifies whether an interface is enabled to become a backup interface in Loop Free Alternate (LFA) calculation.
Null(0): disables an interface from becoming a backup interface in LFA calculation.
level1(1): specifies an interface as a backup interface in Level-1.
level2(2): specifies an interface as a backup interface in Level-2.
level12(3): specifies an interface as a backup interface in Level-1 and Level-2.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.6 |
hwIsisCircMTRowStatusThis object indicates the row status of this table:
createAndGo(4): indicates that a row is created.
destroy(6): indicates that a row is deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.24.2.1.22.1.7 |
hwIsisIntfBfdTableSet of BFD commands on interface of the Integrated IS-IS protocol existing on the system. SEQUENCE OF HwIsisIntfBfdEntry .1.3.6.1.4.1.2011.5.25.24.2.1.23 |
hwIsisIntfBfdEntryEntry of BFD commands on interface of the Integrated IS-IS protocol existing on the system. HwIsisIntfBfdEntry .1.3.6.1.4.1.2011.5.25.24.2.1.23.1 |
hwIsisCircBfdStateThe value of this object identifies the BFD status:
enable(1): enables BFD.
disable(2): disables BFD.
static(3): configures static BFD.
block(4): blocks BFD on an interface.
By default, BFD is not enabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.1 |
hwIsisCircBfdMinTxIntervalThe value of this object identifies the minimum interval for sending BFD packets.
The value range and default value of this object are determined by the license file.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.2 |
hwIsisCircBfdMinRxIntervalThe value of this object identifies the minimum interval for sending BFD packets.
The value range and default value of this object are determined by the license file.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.3 |
hwIsisCircBfdMultiplierThe value of this object identifies the local BFD detection multiplier.
The value range and default value of this object are determined by the license file.rw Integer32 .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.4 |
hwIsisCircBfdFrrBindingThis object indicates that the BFD status is bound to IS-IS Auto FRR.
enable(1): indicates that BFD is bound to IS-IS Auto FRR.
disable(2): indicates that BFD is not bound to IS-IS Auto FRR.
By default, the BFD session status is not bound to IS-IS Auto FRR.rw Enumeration .1.3.6.1.4.1.2011.5.25.24.2.1.23.1.5 |
hwIsisTrapsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.24.2.2 |
hwIsisAdjChangeReasonThis object indicates the cause of the neighbor Down event.ro Enumeration .1.3.6.1.4.1.2011.5.25.24.2.2.1 |
hwisisSysInstanceThis object indicates the IS-IS process.ro Integer32 .1.3.6.1.4.1.2011.5.25.24.2.2.2 |
hwisisSysLevelIndexThis object indicates an IS-IS level.ro Enumeration .1.3.6.1.4.1.2011.5.25.24.2.2.3 |
hwIsisOwnSysIDThis object indicates the system ID of an IS-IS process. The system ID and area address are a major part of a NET.ro SystemID .1.3.6.1.4.1.2011.5.25.24.2.2.4 |
hwIsisAdjSysIDThis object indicates the system ID of an IS-IS process. The system ID and area address are a major part of a NET.ro SystemID .1.3.6.1.4.1.2011.5.25.24.2.2.5 |
hwIsisAdjSysNameConfigures the name of the IS-IS dynamic host. The value is a string of 1 to 64 characters.
When the length is 0, the configured IS-IS dynamic host name is deleted.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.2.6 |
hwIsisConflictSystemIDThe ID for this instance of the Integrated IS-IS
protocol. This value is appended to each of the
area addresses to form the Network Entity Titles.
The derivation of a value for this object is
implementation-specific. Some implementations may
automatically assign values and not permit an
SNMP write, while others may require the value
to be set manually.ro SystemID .1.3.6.1.4.1.2011.5.25.24.2.2.7 |
hwIsisAutoSysIdThe ID for this instance of the Integrated IS-IS
protocol. This value is appended to each of the
area addresses to form the Network Entity Titles.
The derivation of a value for this object is
implementation-specific. Some implementations may
automatically assign values and not permit an
SNMP write, while others may require the value
to be set manually.ro SystemID .1.3.6.1.4.1.2011.5.25.24.2.2.8 |
hwIsisLocalIPLocal IP address.ro InetAddress .1.3.6.1.4.1.2011.5.25.24.2.2.9 |
hwIsisRemoteIPIP address of the remote end.ro InetAddress .1.3.6.1.4.1.2011.5.25.24.2.2.10 |
hwIsisAdjIPNeighbor IP address.ro InetAddress .1.3.6.1.4.1.2011.5.25.24.2.2.11 |
hwIsisPeerFlappingSuppressStatusThis object indicates the mode of the IS-IS neighbor relationship flapping suppression.
none(1): IS-IS neighbor relationship flapping suppression is not started yet.
holddown(2): IS-IS neighbor relationship flapping suppression works in Hold-down mode.
holdmaxcost(3): IS-IS neighbor relationship flapping suppression works in Hold-max-cost mode.ro Enumeration .1.3.6.1.4.1.2011.5.25.24.2.2.12 |
hwIsisRemainingLifetimeThe remaining-lifetime of LSP.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2011.5.25.24.2.2.13 |
hwIsisHostNameThe dynamic host name of IS-IS device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.2.14 |
hwIsisHostIpAddressIP address of of IS-IS device.ro InetAddress .1.3.6.1.4.1.2011.5.25.24.2.2.15 |
hwIsisPurgeLspNumThe IS-IS device purge the lsp number.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.2.16 |
hwIsisAffectedNodeNumThe IS-IS device affect the lsp number.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.2.17 |
hwIsisTotalNodeNumThe IS-IS total node number.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.2.18 |
hwIsisIntervalThe statistic interval.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.2.19 |
hwIsisRuledOutDeviceNumThe rule out device number.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.24.2.2.20 |
hwIsisSystemIDThe IS-IS System ID.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.2.21 |
hwIsisHostName1This object indicates a system ID which is used to uniquely identify a host or router in an area.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.2.22 |
hwIsisHostIpAddress1IP address of of IS-IS device.ro InetAddress .1.3.6.1.4.1.2011.5.25.24.2.2.23 |
hwIsisSystemID1This object indicates a system ID which is used to uniquely identify a host or router in an area.ro SystemID .1.3.6.1.4.1.2011.5.25.24.2.2.24 |
hwIsisHostName2The dynamic host name of IS-IS device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.2.25 |
hwIsisHostIpAddress2IP address of of IS-IS device.ro InetAddress .1.3.6.1.4.1.2011.5.25.24.2.2.26 |
hwIsisSystemID2This object indicates a system ID which is used to uniquely identify a host or router in an area.ro SystemID .1.3.6.1.4.1.2011.5.25.24.2.2.27 |
hwIsisHostName3The dynamic host name of IS-IS device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.24.2.2.28 |
hwIsisHostIpAddress3IP address of of IS-IS device.ro InetAddress .1.3.6.1.4.1.2011.5.25.24.2.2.29 |
hwIsisSystemID3This object indicates a system ID which is used to uniquely identify a host or router in an area.ro SystemID .1.3.6.1.4.1.2011.5.25.24.2.2.30 |
hwIsisConfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.24.2.3 |
hwIsisCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.24.2.3.1 |
hwIsisConfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.24.2.3.2 |
hwIsisTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.24.2.4 |
hwIsisSystemIdConflictIS-IS detects a system ID conflict in an area. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.1 |
hwIsisL1ImportRouteExceedLimitISIS level-1 number of imported routes has exceeded the maximum limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.2 |
hwIsisL1ImportRouteRestoreToLimitISIS level-1 number of imported routes is restored to less than or equal to the maximum limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.3 |
hwIsisL2ImportRouteExceedLimitISIS level-2 number of imported routes has exceeded the maximum limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.4 |
hwIsisL2ImportRouteRestoreToLimitISIS level-2 number of imported routes is restored to less than or equal to the maximum limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.5 |
hwIsisL1ImportRouteThresholdReachISIS level-1 number of imported routes has reached the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.6 |
hwIsisL1ImportRouteThresholdReachClearISIS level-1 number of imported routes has been less than the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.7 |
hwIsisL2ImportRouteThresholdReachISIS level-2 number of imported routes has reached the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.8 |
hwIsisL2ImportRouteThresholdReachClearISIS level-2 number of imported routes has been less than the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.9 |
hwIsisLsdbThresholdReachThe number of LSP has reached the upper threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.10 |
hwIsisLsdbThresholdReachClearThe number of LSP has been less than the lower threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.11 |
hwIsisSystemIdAutoRecoverAfter a system ID conflict was detected within an IS-IS area, IS-IS changed the system ID automatically. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.12 |
hwIsisAdjacencyChangeClearThe isisAdjacencyChange alarm was cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.13 |
hwIsisSeqNumExceedThresholdThe LSP sequence number has exceeded the upper threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.14 |
hwIsisSeqNumExceedThresholdClearThe LSP sequence number has been less than the upper threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.15 |
hwIsisAttemptToExceedMaxSequenceClearThe LSP sequence number has been less than the maximum value. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.16 |
hwIsisPeerFlapSuppStatusChangeThe object is used to monitor the peer flapping-suppress status of interface in ISIS. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.17 |
hwIsisLspRemainingLifetimeRefreshThe object is used to monitor the receiving of LSP with small remaining lifetime. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.18 |
hwIsisDeleteRouteByPurgeThe local device deleted IS-IS routes advertised by other devices. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.19 |
hwIsisDeleteRouteByPurgeClearThe local device did not delete IS-IS routes advertised by other devices. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.20 |
hwIsisRouteBeDeletedByPurgeExactIS-IS routes advertised by the local device were deleted by another device. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.21 |
hwIsisRouteBeDeletedByPurgeExactClearIS-IS routes advertised by the local device were not deleted by another device. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.22 |
hwIsisRouteBeDeletedByPurgeInexactIS-IS routes advertised by the local device were deleted by another device, and the possibly faulty device did not
support IS-IS purge LSP source tracing. Log in to the possibly faulty device. If the device is deleting routes,
reset or isolate it from the network. Otherwise, check other devices. Neither of the devices displayed in the
display isis purge-source-trace analysis-report command output is the faulty device. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.23 |
hwIsisRouteBeDeletedByPurgeInexactClearIS-IS routes advertised by the local device were not deleted by another device. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.24 |
hwIsisRouteBeDeletedByPurgeIS-IS routes advertised by the local device were deleted by another device. Log in to the possibly faulty device.
If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.25 |
hwIsisRouteBeDeletedByPurgeClearIS-IS routes advertised by the local device were not deleted by another device. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.26 |
hwIsisThirdPartRouteBeDeletedByPurgeExactIS-IS routes advertised by another device were deleted. Reset or isolate the faulty device from the network. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.27 |
hwIsisThirdPartRouteBeDeletedByPurgeExactClearIS-IS routes advertised by another device were not deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.28 |
hwIsisThirdPartRouteBeDeletedByPurgeInexactIS-IS routes advertised by another device were deleted, and the possibly faulty device did not support
IS-IS purge LSP source tracing. Log in to the possibly faulty device. If the device is deleting routes,
reset or isolate it from the network. Otherwise, check other devices. Neither of the devices displayed
in the display isis purge-source-trace analysis-report command output is the faulty device. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.29 |
hwIsisThirdPartRouteBeDeletedByPurgeInexactClearIS-IS routes advertised by another device were not deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.30 |
hwIsisThirdPartRouteBeDeletedByPurgeIS-IS routes advertised by another device were deleted. Log in to the possibly faulty device.
If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.31 |
hwIsisThirdPartRouteBeDeletedByPurgeClearIS-IS routes advertised by another device were not deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.24.2.4.32 |