HUAWEI-LI-MIB
AI MIB Summary
The HUAWEI-LI-MIB module provides SNMP-based management and monitoring of Huawei network equipment's Lawful Interception (LI) subsystem, exposing specific metrics for interception session states, trigger configurations, and compliance data collection parameters. This interface enables network operators to verify the operational status of legally mandated traffic monitoring capabilities and audit the integrity of intercepted data streams in real-time.
This module manages huawei's Lawful interception feature.
Main OID:
hwLiMib.1.3.6.1.4.1.2011.5.25.131
63
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
hwLiMibThis module manages huawei's Lawful interception feature. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.131 |
hwLiMibNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.131.1 |
hwLiMibActiveThis notification is sent when an intercepting router or switch is first
capable of intercepting a packet corresponding to a configured data stream. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.131.1.1 |
hwLiX3HeartBeatAlarmThis notification is sent when an LIG is lost connection to the device
which intercepting packet corresponding to a configured data stream. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.131.1.2 |
hwLiX3HeartBeatRecoverThis notification is sent when an LIG is recover connection to the device
which intercepting packet corresponding to a configured data stream. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.131.1.3 |
hwLiMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.131.2 |
hwLiAgentObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.131.2.1 |
hwLiAgentTimeThe time of the LI agent.Read-only.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.131.2.1.1 |
hwLiAgentEnableThe status of the LI agent.Read-only.ro Enumeration .1.3.6.1.4.1.2011.5.25.131.2.1.2 |
hwLiAgentX2IpAddressThe IP address of the X2 interface in LI agent.Just can be read by server
and can be set in command line.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.1.3 |
hwLiAgentX2PortThe Port of the X2 interface in LI agent.Just can be read by server
and can be set in command line.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.1.4 |
hwLiAgentX3IpAddressThe IP address of the X3 interface in LI agent.Just can be read by server
and can be set in command line.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.1.5 |
hwLiAgentX3PortThe Port of the X3 interface in LI agent.Just can be read by server
and can be set in command line.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.1.6 |
hwLiGatewayGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.131.2.3 |
hwLiGatewayNewIndexThis object contains a value which may be used as an index
value for a new HwLiGatewayEntry. This is to reduce
the probability of errors during creation of new hwLiGatewayTable
entries.0 means no free resource.ro Integer32 (0 | 1..10) .1.3.6.1.4.1.2011.5.25.131.2.3.1 |
hwLiGatewayTableThis table lists the LI Gateway Devices with which the
intercepting device communicates.
This table is written by the LI Gateway Device, and is always
volatile. This is because intercepts may disappear during a
restart of the intercepting equipment.
Entries are added to this table via hwLiGatewayStatus in
accordance with the RowStatus convention. SEQUENCE OF HwLiGatewayEntry .1.3.6.1.4.1.2011.5.25.131.2.3.2 |
hwLiGatewayEntryThe entry describes a single session maintained with an
application on a LI Gateway Device. HwLiGatewayEntry .1.3.6.1.4.1.2011.5.25.131.2.3.2.1 |
hwLiGatewayIndexThe index of the LIG itself. Integer32 .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.1 |
hwLiGatewayAddressTypeThe type of address in LIGrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.2 |
hwLiGatewayX2ProtocolThe protocol used in transferring intercepted data to the
Gateway Device.rw Enumeration .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.3 |
hwLiGatewayX2AddressThe IP Address of the Gateway Device's network interface
to which to direct IRI.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.4 |
hwLiGatewayX2PortThe port number on the Gateway Device's network interface
to which to direct IRI.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.5 |
hwLiGatewayX3ProtocolThe protocol used in transferring intercepted data to the
Gateway Device.rw Enumeration .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.6 |
hwLiGatewayX3AddressThe IP Address of the Gateway Device's network interface
to which to direct CC.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.7 |
hwLiGatewayX3PortThe port number on the Gateway Device's network interface
to which to direct intercepted traffic.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.8 |
hwLiGatewayX3HeartBeatTimerThe timer for sending HeartBeat to LIG,In secondsrw Integer32 .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.9 |
hwLiGatewayX3NoResponseNumThe times of heartbeats that allowed to missed from LIGrw Integer32 .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.10 |
hwLiGatewayX3OperateStatusThe operate status of X3 interfacero Enumeration .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.11 |
hwLiGatewayX3DscpThe Differentiated Services Code Point the intercepting
device applies to the IP packets encapsulating the
intercepted traffic.rw HWLiDscp .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.12 |
hwLiGatewayRowStatusThe status of this conceptual row. This object is used to
manage creation, modification and deletion of rows in this
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.14 |
hwLiGatewayX3AddressTypeThe type of address in LIGrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.15 |
hwLiGatewayX2AddressTypeThe type of address in LIGrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.3.2.1.16 |
hwLiGatewayCapabilitiesThis object displays the device capabilities with respect to
certain fields in Gateway Device table. This may be dependent
on hardware capabilities, software capabilities.
The following values may be supported:
ipv4SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
hwLiGatewaySrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv4
address Gateway Device.
ipv6SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
hwLiGatewaySrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv6
address Gateway Device.
udp: UDP may be used as transport protocol
(denoted by hwLiGatewayTransport) in
transferring intercepted data to the
Gateway Device.
tcp: TCP may be used as transport protocol
(denoted by hwLiGatewayTransport) in
transferring intercepted data to the
Gateway Device.ro Bits .1.3.6.1.4.1.2011.5.25.131.2.3.3 |
hwLiStreamGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.131.2.4 |
hwLiStreamTableThe Intercept Stream Table lists the IPv4 and IPv6 streams
to be intercepted. The same data stream must be used by
one LIG.
The first index indicates which LIG the
intercepted traffic will be diverted to. The second index
permits multiple classifiers to be used together, such as
having an IP address as source or destination. SEQUENCE OF HwLiStreamEntry .1.3.6.1.4.1.2011.5.25.131.2.4.2 |
hwLiStreamEntryA stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface, and many
application interfaces are supported. HwLiStreamEntry .1.3.6.1.4.1.2011.5.25.131.2.4.2.1 |
hwLiStreamIndexThe index of the stream itself. Integer32 .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.1 |
hwLiStreamLiIdThe ID indicate a independency stream in a LIG .rw Unsigned32 .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.2 |
hwLiStreamActivationTypeIntercepted IRI or CC or BOTH.rw Enumeration .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.3 |
hwLiStreamSessionIdThe index of the stream itself.0 means no session ID will be specifiedrw Integer32 .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.4 |
hwLiStreamTargetIdTypeTarget ID type specifies the type of packets.
1 means one direction traffic is intercept,
2 means bidirectional traffic is intercept.
for bidirectional interception, if the source IP or destination IP
in a packet is equal with the configured hwLiStreamSrcIpAddress
If other condition is satisfied then the packet is intercepted.
for one-directional interception, if the sourceIP and DestinationIP
in a packet is equal with the configured hwLiStreamSrcIpAddress and
hwLiStreamDstIPAddress If other condition is satisfied then the
packet is interceptedrw Enumeration .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.5 |
hwLiStreamSrcMacAddressSource Mac address of the packets which will be intercepted.0000-0000-0000 means no MAC address will be specifiedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.7 |
hwLiStreamDstMacAddressDestination Mac address of the packets which will be intercepted.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.8 |
hwLiStreamSrcIpAddressThe Source Address used in packet selection. This address will
be of the type specified in hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specifiedrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.9 |
hwLiStreamSrcIpLengthThe length of the Source Prefix. A value of 32 causes all
addresses to match. This prefix length will be consistent with
the type specified in hwLiStreamIpAddrType.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.10 |
hwLiStreamDstIpAddressThe Destination address or prefix used in packet selection.
This address will be of the type specified in
hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specifiedrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.11 |
hwLiStreamDstIpLengthThe length of the Destination Prefix. A value of 32 causes
all addresses to match. This prefix length will be consistent
with the type specified in hwLiStreamIpAddrType.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.12 |
hwLiStreamProtocolProtocol type of the packets which will be intercepted.0 means no Protocol type will be specifiedrw Integer32 .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.13 |
hwLiStreamSrcPortThe fourth layer source port.0 means no Port will be specifiedrw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.14 |
hwLiStreamDstPortThe fourth layer Destination port.0 means no Port will be specifiedrw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.15 |
hwLiStreamIfIndexThe interface switch carrying the intercepted taffic.0 means no interface will be specifiedrw Integer32 .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.16 |
hwLiStreamUserNameThe username whose traffic will be intercepted.zero-length means no user will be specifiedrw OCTET STRING .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.17 |
hwLiStreamRowStatusThe status of this conceptual row. This object is used to
manage creation, modification and deletion of rows in this
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.18 |
hwLiStreamSrcIpAddressTypeThe source IP address of the interception streamrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.19 |
hwLiStreamDstIpAddressTypeThe destination IP address of the interception streamrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.20 |
hwLiStreamSrcVpnNameThe source VPN instance name whose traffic will be intercepted.zero-length means no VPN will be specifiedrw OCTET STRING .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.21 |
hwLiStreamDstVpnNameThe destination VPN instance name whose traffic will be intercepted. zero-length means no VPN will be specifiedrw OCTET STRING .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.22 |
hwLiStreamL2tpIfIndexThe L2TP ifindex of intercepting stream.0 means no l2tpIfindex will be specifiedrw Integer32 .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.23 |
hwLiStreamL2tpVlanIdThe L2TP VLAN ID of intercepting stream.0 means no Vlan will be specifiedrw Integer32 .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.24 |
hwLiStreamAcctSessionIdThe accounting session ID of intercepting stream.zero-length means no accouting session ID will be specifiedrw OCTET STRING .1.3.6.1.4.1.2011.5.25.131.2.4.2.1.25 |
hwLiMibConform OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.131.3 |
hwLiMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.131.3.2 |
hwLiMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.131.3.3 |