HUAWEI-MINM-MIB
AI MIB Summary
The HUAWEI-MINM-MIB provides SNMP objects for configuring and monitoring the Huawei MINM (Mobile Network Interface Management) feature, specifically managing interface parameters, status states, and traffic statistics for mobile network interfaces on Huawei routing and switching platforms.
The HUAWEI-MINM-MIB contains objects to Manage configuration for MINM feature.
Main OID:
hwMinMMIB.1.3.6.1.4.1.2011.5.25.133.1
181
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
181 total| Object Name |
|---|
hwMINM OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133 |
hwMinMMIBThe HUAWEI-MINM-MIB contains objects to
Manage configuration for MINM feature. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.133.1 |
hwMinMObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.1 |
hwMinMSystemObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.1.1 |
hwMinMVirtualMacIndicates the virtual MAC address of the device.
By default, there is no virtual MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.1.1 |
hwMinMMacTnlBVlanListLowIndicates the starting value of the backbone VLAN that is assigned to the mac-tunnel.rw VlanList .1.3.6.1.4.1.2011.5.25.133.1.1.1.2 |
hwMinMMacTnlBVlanListHighIndicates the ending value of the backbone VLAN that is assigned to the mac-tunnel.rw VlanList .1.3.6.1.4.1.2011.5.25.133.1.1.1.3 |
hwMinMTrapEnableIndicates that the Snmp-Agent Trap is enabled on the Mac-in-Mac.By default, it is disable.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.1.4 |
hwMinMMacTnlObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.1.2 |
hwMinMMacTnlCfgObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.1.2.1 |
hwMinMMacTnlIndexNextIndicates the Index of the Next Mac Tunnel.It begins with one.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.1 |
hwMinMMacTnlCfgTableIndicates a configuration information table of Mac-tunnel. SEQUENCE OF HwMinMMacTnlCfgEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2 |
hwMinMMacTnlCfgEntryIndicates the entry in the tunnel configuration table of the mac-tunnel. HwMinMMacTnlCfgEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1 |
hwMinMMacTnlIndexIndicates the index of Mac Tunnel. It begins with one. Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.1 |
hwMinMMacTnlNameIndicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.11 |
hwMinMMacTnlDMacIndicates the remote MAC address of the current mac-tunnel.
By default, there is no such configuration.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.12 |
hwMinMMacTnlBVlanIDIndicates BVLAN value of the current BVLAN used by the mac-tunnel: It ranges from 1 to 4094. By default, BVLAN value is not configured.
The VLAN here must have been created and be in the backbone VLAN used by the mac-tunnel.
The special value of zero is used to indicate that no VLAN-ID is present or used.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.13 |
hwMinMMacTnlBVlanTypeIndicates the B-TAG type of the BVLAN. By default, it is 88a8.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.14 |
hwMinMMacTnlPriorityValueIndicates priority level of the mac-tunnel.
It is used to set the priority field of B-TAG.
There are eight priority levels. By default, the I-TAG priority is used.
The special value of eight is used to indicate that priority was unknown or none.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.15 |
hwMinMMacTnlOutgoingIfIndexIndicates the port used in the mac-tunnel. By default, it is not configured.
The value zero is used to indicate that interface was unknown or none.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.16 |
hwMinMMacTnlSplitHorizonEnableIndicates the split horizon of tunnels. By default, it is enabled.
When split horizon is enabled on two mac-tunnels, the two tunnels cannot exchange packets.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.17 |
hwMinMMacTnlAdminStatusIndicates the administration status of the mac-tunnel.rw HWAdminStatus .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.18 |
hwMinMMacTnlOperStatusIndicates the physical state of the mac-tunnel.ro HWOperStatus .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.19 |
hwMinMMacTnlDescriptionIndicates descriptive information of the static Mac-In-Mac tunnel.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.20 |
hwMinMMacTnlStatisticsResetIndicates the reset on traffic statistics of the mac-tunnel.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.21 |
hwMinMMacTnlPriorityTrustITagIndicates that the I-TAG priority is copied to the mac-tunnel.
By default, the I-TAG priority is not copied to the mac-tunnel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.22 |
hwMinMMacTnlDeiTrustIDeiIndicates that the I-DEI priority is copied to the mac-tunnel.
By default, the I-DEI priority is not copied to the mac-tunnel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.23 |
hwMinMMacTnlDeiValueIndicates DEI of the mac-tunnel. It is used to set the DEI field of B-TAG.
When DEI is true, the value is set to 1.
When DEI is false, the value is set to 0.
By default, the I-DEI priority is not copied to the mac-tunnel, and the DEI is false.
When the value of the DEI is set to 2, it indicates that no DEI
is configured on the tunnel.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.24 |
hwMinMMacTnlRowStatusIndicates the RowStatus.
The following three actions are used: active, createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.51 |
hwMinMMacTnlStatisticsTableIndicates a query for the hwMinMMacTnlStatisticsTable of the mac-tunnel. SEQUENCE OF HwMinMMacTnlStatisticsEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3 |
hwMinMMacTnlStatisticsEntryIndicates an entry query for the hwMinMMacTnlStatisticsTable of the mac-tunnel. HwMinMMacTnlStatisticsEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1 |
hwMinMMacTnlInPacketsIndicates the number of packets received by the mac-tunnel.ro Counter64 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.11 |
hwMinMMacTnlInBytesIndicates the number of bytes received by the mac-tunnel.ro Counter64 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.12 |
hwMinMMacTnlOutPacketsIndicates the number of packets sent by the mac-tunnel.ro Counter64 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.13 |
hwMinMMacTnlOutBytesIndicates the number of bytes sent by the mac-tunnel.ro Counter64 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.14 |
hwMacTnlNameToIndexMappingTableIndicates the mapping table of the tunnel name and tunnel index. SEQUENCE OF HwMacTnlNameToIndexMappingEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4 |
hwMacTnlNameToIndexMappingEntryIndicates the mapping table entry of the tunnel name and tunnel index. HwMacTnlNameToIndexMappingEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1 |
hwMacTnlNameIndicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte. OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1.1 |
hwMacTnlIndexIndicates the tunnel index.It begins with one.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1.11 |
hwMinMMacTnlOamObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.1.2.2 |
hwMinMMacTnlCCTableIndicates the parameters used to describe CC packets. SEQUENCE OF HwMinMMacTnlCCEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1 |
hwMinMMacTnlCCEntryIndicates the CC table entry. HwMinMMacTnlCCEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1 |
hwMinMMacTnlCfmEnableIndicates that CFM is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.11 |
hwMinMMacTnlCCIntervalIndicates the time interval of CC packets.rw HwDot1agCfmCcmInterval .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.12 |
hwMinMMacTnlSomeRMepCcmDefectIndicates a connectivity failure of tunnels.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.13 |
hwMinMMacTnlSomeRdiDefectIndicates whether the RDI packet from the remote end is received.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.14 |
hwMinMMacTnlCcReceiveEnabledWhether CC reception is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.15 |
hwMinMMacTnlCCRowStatusIndicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.51 |
hwMinMMacTnlLbTableIndicates the parameters used to describe Lb packets. SEQUENCE OF HwMinMMacTnlLbEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2 |
hwMinMMacTnlLbEntryIndicates the loopback table entry. HwMinMMacTnlLbEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1 |
hwMinMMacTnlLbmEnableIndicates that the MAC Ping is started inside the tunnel.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.11 |
hwMinMMacTnlLbmTimeStampIndicates the operation time.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.12 |
hwMinMMacTnlLbmTimeOutIndicates the timeout period entered by a user, in ms. By default, it is 2000.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.13 |
hwMinMMacTnlLbmTimesIndicates the number of times that Ping is entered.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.14 |
hwMinMMacTnlLbmSizeIndicates the size of an Lbm packet.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.15 |
hwMinMMacTnlLbrInIndicates the number of valid LBR packets receivedro Counter32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.16 |
hwMinMMacTnlLbmResultWhether the MAC ping operation for a tunnel is over.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.17 |
hwMinMMacTnlLbRowStatusIndicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.51 |
hwMinMMacTnlLbResultTablePerformance statistics returned by using the MAC ping command for a tunnel. SEQUENCE OF HwMinMMacTnlLbResultEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3 |
hwMinMMacTnlLbResultEntryIndicates the loopback table entry. HwMinMMacTnlLbResultEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1 |
hwMinMMacTnlMacPingRTTMinThe minimum round trip time.ro Gauge32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.11 |
hwMinMMacTnlMacPingRTTMaxThe maximum round trip time.ro Gauge32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.12 |
hwMinMMacTnlMacPingRTTAvgThe average round trip time.ro Gauge32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.13 |
hwMinMMacTnlMacPingPacketLossRatioThe packet loss ratio.ro Gauge32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.14 |
hwMinMMacTnlLtmTableIndicates the parameters used to describe Ltm packets. SEQUENCE OF HwMinMMacTnlLtmEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4 |
hwMinMMacTnlLtmEntryIndicates the linktrace table entry. HwMinMMacTnlLtmEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1 |
hwMinMMacTnlLtmEnableIndicates that the MAC Trace is started inside the tunnel.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.11 |
hwMinMMacTnlLtmTimeStampThe time stamp for enabling the MAC trace operation for a tunnel.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.12 |
hwMinMMacTnlLtmTimeOutIndicates the timeout period entered by a user, in ms. By default, it is 2000.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.13 |
hwMinMMacTnlLtmTtlIndicates the living cycle of Ltm packets.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.14 |
hwMinMMacTnlLtmFlagsThe flags field of an LTM packet.ro Bits .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.15 |
hwMinMMacTnlLtmSeqNumberThe sequence number of an LTM packet.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.16 |
hwMinMMacTnlLtmEgressIdentifierIndicates the egress ID of Ltm packets.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.17 |
hwMinMMacTnlLtmResultTwo conditions are used to determine whether the MAC trace operation to a tunnel is over: (1) The peer of a tunnel has been traced. (2) The preset timer for timeout is triggered.
Either condition indicates the completion of an operation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.18 |
hwMinMMacTnlLtmRowStatusIndicates the row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.51 |
hwMinMMacTnlLtrTableIndicates the parameters used to describe Ltr packets. SEQUENCE OF HwMinMMacTnlLtrEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5 |
hwMinMMacTnlLtrEntryIndicates the linktraceRelay table entry. HwMinMMacTnlLtrEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1 |
hwMinMMacTnlLtrSeqNumberIndicates the parameters used to describe Ltr packets. Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.1 |
hwMinMMacTnlLtrReceiveOrderAn index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value. Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.2 |
hwMinMMacTnlLtrTtlTTL field value for a returned LTR.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.11 |
hwMinMMacTnlLtrForwardedIndicates an identifier that shows whether the LTM packet should be forwarded to the next hop.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.12 |
hwMinMMacTnlLtrLastEgressIdentifierLTR packet is a response packet to a LTM packet.
The LTM packet is the last packet sent by a port on a device.
This variable indicates the port identifier of the LTM packet.
The last six bytes indicate the MAC address, and the first two bytes represent the board number and outbound port number respectively.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.13 |
hwMinMMacTnlLtrNextEgressIdentifierIf the LTM packet needs to be forwarded to the next hop, the port identifier of the next hop should be added to the TVL field in the response LTR packet. The last six bytes indicate the MAC address, and the first two bytes represent the board number and outbound port number respectively.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.14 |
hwMinMMacTnlLtrRelayIndicates the value in the Relay Action field.ro HwDot1agCfmRelayActionFieldValue .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.15 |
hwMinMMacTnlLtrIngressThe value returned in the Ingress Action Field of the LTM.ro HwDot1agCfmIngressActionFieldValue .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.16 |
hwMinMMacTnlLtrIngressMacMAC address returned in the ingress MAC address field.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.17 |
hwMinMMacTnlLtrIngressPortIdSubtypeFormat of the Ingress Port ID.ro HwLldpPortIdSubtype .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.18 |
hwMinMMacTnlLtrIngressPortIdIngress Port ID. The format of this object is determined by
the value of the dot1agCfmLtrIngressPortIdSubtype object.ro HwLldpPortId .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.19 |
hwMinMMacTnlLtrEgressThe value returned in the Egress Action Field of the LTM.ro HwDot1agCfmEgressActionFieldValue .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.20 |
hwMinMMacTnlLtrEgressMacMAC address returned in the egress MAC address field.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.21 |
hwMinMMacTnlLtrEgressPortIdSubtypeFormat of the egress Port ID.ro HwLldpPortIdSubtype .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.22 |
hwMinMMacTnlLtrEgressPortIdEgress Port ID. The format of this object is determined by
the value of the dot1agCfmLtrEgressPortIdSubtype object.ro HwLldpPortId .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.23 |
hwMinMMacTnlApsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.1.2.3 |
hwMinMMacTnlApsCfgTableIndicates the configuration table for the Aps protection of the mac-tunnel. SEQUENCE OF HwMinMMacTnlApsCfgEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1 |
hwMinMMacTnlApsCfgEntryIndicates the configuration table entry for the Aps protection of the mac-tunnel. HwMinMMacTnlApsCfgEntry .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1 |
hwMinMProtectMacTnlIndexIndicates the index of ProtectMacTunnel. It begins with one.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.11 |
hwMinMProtectMacTnlNameIndicates the tunnel name of the protective mac-tunnel.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.12 |
hwMinMProtectMacTnlDMacIndicates the remote MAC address of the protecting mac-tunnel.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.13 |
hwMinMProtectMacTnlBVlanIDIndicates BVLAN value used by the protecting mac-tunnel: It ranges from 1 to 4094.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.14 |
hwMinMProtectApsSwitchModeIndicates the protection modes of the G.8031 Aps protection group of mac-tunnels.
oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends
oneplusoneunidirectional(2): 1 + 1 switchover protection modes on a single end
onetoone(3): 1:1 protection mode
By the default, the 1:1 protection mode is used.rw HWProtectMode .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.15 |
hwMinMProtectProtocolApsEnableIndicates that the G.8031 protocol of Aps protection group in the mac-tunnel is enabled.
By default, the protocol is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.16 |
hwMinMProtectApsFastIntervalIndicates the configuration of fast sending time interval for each protection group.
The time intervals for fast sending of Aps packets described in the G.8031 are as follows:
By default, the time interval for fast sending of Aps packets in G.8031 is 3.3 ms.
Optional values for sending interval are as follows:
ApsInterval3dot3ms(1): indicates a sending interval of 3.3 ms.
ApsInterval5ms(3): indicates a sending interval of 5 ms.
ApsInterval10ms(3): indicates a sending interval of 10 ms.
ApsInterval5ms(4): indicates a sending interval of 15 ms.
ApsInterval20ms(5): indicates a sending interval of 20 ms.
ApsInterval30ms(6): indicates a sending interval of 30 ms.rw HWApsInterval .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.17 |
hwMinMProtectHoldoffTimeIndicates the switchover restoration time of Aps protection groups in the mac-tunnel, in 100 ms.
It ranges from 0 to 100.
By default, the switchover restoration time is not delayed. The value of delay is zero.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.18 |
hwMinMProtectRevModeIndicates the non-restoration protection switchover mode of Aps protection group in mac-tunnels.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.19 |
hwMinMProtectRevWtrTimeIndicates the restoration time of restoration protection switchover mode of Aps protection group in mac-tunnels.
By default, the switchover mode is restoration. The restoration time is five minutes.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.20 |
hwMinMProtectSwitchOperationIndicates the switchover commands for the Aps protection group of mac-tunnels.
The priority levels in a descending order are: clear, lock, force and manual.
clear(1): clears the lock, force and manual commands, and WTR state on the local end.
After the local commands are cleared, the WTR state cannot be entered.
lock(2): locks the services on the working tunnel.
force(3): forcibly switches the services to the protection tunnel when the protection tunnel is in sound state.
manual(4): forcibly switches the services to the protection channel when the working and the protection tunnel are in sound state.
null(5):there is not manual commands.rw HWSwitchOperation .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.21 |
hwMinMProtectProtocolIndicates the protection protocol of the protection group of mac-tunnels.
ProtocolAPS(1): use an APS protocol to enhance the protection switching.
ProtocolOAM(2): not using any APS protocol to enhance the protection switching.
By the default, the ProtocolOAM is used.rw HWProtectProtocol .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.22 |
hwMinMProtectRowStatusIndicates the RowStatus.
The following three actions are used: active, createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.51 |
hwMinMSIObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.1.3 |
hwMinMSIIndexNextIndicates the index of the next Service Instance. It begins with one.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.1 |
hwMinMSICfgTableIndicates the configuration table of a service instance. SEQUENCE OF HwMinMSICfgEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.2 |
hwMinMSICfgEntryIndicates the configuration table entry of a service instance. HwMinMSICfgEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1 |
hwMinMSIIndexIndicates the Index of Service Instance.It begins with one. Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.1 |
hwMinMSIIDIndicates the ID of a service instance. It can be any value within 24 bits.
By default, the value is null.
One ID can be configured to one service instance only.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.11 |
hwMinMSINameIndicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.12 |
hwMinMSIServiceTypeIndicates the type of a service instance as follows:
p2p: indicates the type of a point-to-point service instance.
mp2mp: indicates the type of a multi-point to multi-point service instance.
By default, the service type is mp2mp.rw HWServiceType .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.13 |
hwMinMSIPriorityTrust8021pIndicates that the priority of user packet based on 802.1Q is trusted.
By default, no user priority is trusted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.14 |
hwMinMSIPriorityValueIndicates priority level of a service instance.
It is used to set the priority field of I-TAG.
By default, no user priority is trusted and the priority is zero.
The special value of eight is used to indicate that priority of user is trusted.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.15 |
hwMinMSIInterfaceTypeIndicates the interface type of a service instance.
transparent: indicates the transparent transmission mode.
one-to-one: indicates the one-to-one in the s-tagged mode.
bundling: indicates the bundling in the s-tagged mode.
By default, the s-tagged bundling mode is used.rw HWInterfaceType .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.16 |
hwMinMSIAdminStatusIndicates the administration status of a service instance.rw HWAdminStatus .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.17 |
hwMinMSIOperStatusIndicates the physical status of a service instance.ro HWOperStatus .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.18 |
hwMinMSIMacLearningEnableDisable the MAC learning of a service instance. By default, the MAC learning is enabled.
This object applies to the service instance of mp2mp only.
It is invalid in the service type of p2p.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.19 |
hwMinMSIMacLimitActionIndicates MAC learning restriction of a service instance.
After the number of MAC address entries reaches the limit, the system takes the following actions:
discard: indicates that packets with new MAC address are discarded.
forward: indicates that packets with new MAC address are forwarded, but the address is not added to the MAC address table.rw HWProcessBehavior .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.20 |
hwMinMSIMacLimitAlarmIndicates MAC learning restriction of a service instance.
Indicates whether alarm should be sent after the number of MAC address entries reaches the limit as follows:
disable: indicates no alarm is sent.
enable: indicates alarm is sent in syslog.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.21 |
hwMinMSIMacLimitMaxinumIndicates MAC learning restriction of a service instance.
The number of MAC addresses that can be learnt by the current service instance ranges from 0 to 131072.
When the number is set to zero, no restriction is imposed on the address learning.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.22 |
hwMinMSIL2CtrlProProcessThis configuration is unsuitable for the case of port+vlan+cos mapping. Layer 2 control packets of a service instance are handled as follows: By default, all layer 2 control packets are transmitted transparently and all bits are 0; if a bit is 1, it indicates that the packets of this protocol will be discarded.
If bit 0 is 1, it indicates that all layer 2 control packets will be discarded.
If bit 1 is 1, it indicates that the STP packets will be discarded.
If bit 2 is 1, it indicates that the LLAP packets will be discarded.
If bit 3 is 1, it indicates that the LACP packets will be discarded.
If bit 4 is 1, it indicates that the DOT3AH packets will be discarded.
If bit 5 is 1, it indicates that the DOTLAG packets will be discarded.rw Bits .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.23 |
hwMinMSIUnknownUnicastEnbaleIndicates how a service instance processes an unknown unicast packet.
By default, the service instance is allowed to broadcast the unknown unicast packet.
This object applies to the mp2mp service instance only.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.24 |
hwMinMSIMulticastEnableIndicates how a service instance processes an unknown multicast packet.
By default, the service instance is allowed to broadcast the unknown multicast packet.
This object applies to the mp2mp service instance only.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.25 |
hwMinMSIBroadcastEnableIndicates how a service instance processes a broadcast packet.
By default, the service instance is allowed to forward the broadcast packet.
This object applies to the mp2mp service instance only.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.26 |
hwMinMSIDescriptionIndicates descriptive information of a service instance.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.27 |
hwMinMSIStatisticsEnableIndicates that the traffic statistics is enabled on a service instance.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.28 |
hwMinMSIStatisticsResetIndicates the reset on traffic statistics of a service instance.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.29 |
hwMinMSIFcsTransparentEnableThe forwarded packets need to carry the CRC mark. By default, the forwarded packets do not carry the CRC mark.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.30 |
hwMinMSIIngressPriorityValueIndicates the source priority of a service instance.
It is used to set the I-TAG priority field when packets are
encapsulated for transmission on the tunnel.
The source priority has eight levels that range from 0 to 7.
By default, the source priority is copied to the mac-tunnel.
When the source priority is set to 8,
it indicates that the service instance is not configured with a priority,
and the priority does not exist.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.31 |
hwMinMSIEgressPriorityTrustBTagIndicates that the destination priority of a service
instance is copied from the B-TAG priority.
It is used to set whether the I-TAG priority is copied from the B-TAG
priority when packets reach the end of the tunnel and are decapsulated.
By default, the B-TAG priority is not copied to I-TAG.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.32 |
hwMinMSIIngressDeiValueIndicates the source DEI of a service instance.
It is used to set the DEI field when packets are encapsulated for transmission
on the tunnel. When DEI is true, the value is set to 1.
When DEI is false, the value is set to 0. By default,
the S-DEI priority is copied to the mac-tunnel.
When the value of the DEI is set to 2,
it indicates that no DEI is configured on the tunnel.rw Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.33 |
hwMinMSIEgressDeiTrustBDeiIndicates that the destination DEI of a service instance
is copied from the B-DEI priority.
It is used to set whether the DEI of I-TAG is coped from B-DEI
when packets reach the end of the tunnel and are decpasulated.
By default, B-DEI is not copied to I-TAG.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.34 |
hwMinMSIIsolateAllIndicates that all the mapping users of a service instance are isolated. By default, the isolation is disabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.35 |
hwMinMSIRowStatusIndicates the RowStatus.
The following three actions are used: active, createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.51 |
hwMinMSIMappingTableIndicates the configuration table of a service instance user. SEQUENCE OF HwMinMSIMappingEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.3 |
hwMinMSIMappingEntryIndicates the configuration table entry of a service instance user. HwMinMSIMappingEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1 |
hwMinMSIMappingIfIndexThe port that is mapped to the current service instance. If the value is 0, it means that port mapping is not supported. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.1 |
hwMinMSIMappingVlanPriorityThe priority of a user's packets that are mapped to the current service instance. If the value is 8, it means that the priority mapping is not supported. Integer32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.2 |
hwMinMSIMappingGlobalVlanIDThe global VLAN ID that is mapped to the current service instance. If the value is 0, it means that the global VLAN mapping is not supported. VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.3 |
hwMinMSIMappingVlanListLowIndicates the VLAN ID starting value of a service instance user.rw VlanList .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.11 |
hwMinMSIMappingVlanListHighIndicates the VLAN ID ending value of a service instance user.rw VlanList .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.12 |
hwMinMSIMappingUserIsolateIndicates that the specified mapping user of a service instance is isolated. By default, the isolation is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2prw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.13 |
hwMinMSIMappingRowStatusIndicates the RowStatus.
The following three actions are used: active, createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.51 |
hwMinMSIBindMacTnlTableIndicates the mac-tunnel table bound with a service instance. SEQUENCE OF HwMinMSIBindMacTnlEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.4 |
hwMinMSIBindMacTnlEntryIndicates the mac-tunnel table entry bound with a service instance. HwMinMSIBindMacTnlEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1 |
hwMinMSIBindMacTnlIndexIndicates the index of Mac Tunnel. It begins with one. Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1.1 |
hwMinMSIBindMacTnlRowStatusIndicates the RowStatus.
The following three actions are used: active, createAndGo, destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1.51 |
hwMinMSIStatisticsTableIndicates the hwMinMSIStatisticsTable of a service instance. SEQUENCE OF HwMinMSIStatisticsEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.5 |
hwMinMSIStatisticsEntryIndicates the hwMinMSIStatisticsTable entry of a service instance. HwMinMSIStatisticsEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1 |
hwMinMSIInPacketsIndicates the number of packets received by a user of the current service instance.ro Counter64 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.11 |
hwMinMSIInBytesIndicates the number of bytes received by a user of the current service instance.ro Counter64 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.12 |
hwMinMSIOutPacketsIndicates the number of packets sent by a user of the current service instance.ro Counter64 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.13 |
hwMinMSIOutBytesIndicates the number of bytes sent by a user of the current service instance.ro Counter64 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.14 |
hwMinMSIStaticMacFwdTableIndicates the static MAC forwarding table of a service instance: SEQUENCE OF HwMinMSIStaticMacFwdEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.6 |
hwMinMSIStaticMacFwdEntryIndicates the static MAC forwarding table entry of a service instance: HwMinMSIStaticMacFwdEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1 |
hwMinMSIStaticMacFwdCDMacIndicates the destination MAC address of a customer. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.1 |
hwMinMSIStaticMacFwdMacTnlNameIndicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.11 |
hwMinMSIStaticMacFwdOutgoingIfIndexIndicates a outbound port.
The value zero is used to indicate that interface was unknown or none.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.12 |
hwMinMSIStaticMacFwdVlanIDIndicates the downstream vlanid.
The special value of zero is used to indicate that no VLAN-ID is present or used.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.13 |
hwMinMSIStaticMacFwdTypeIndicates the type of the static MAC forwarding table of a service instance:
static(1): indicates a static entry.
blackhole(2): indicates a blackhole entry.rw HWStaticMacFwdType .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.14 |
hwMinMSIStaticMacFwdRowStatusIndicates the RowStatus.
The following three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.51 |
hwSINameToIndexMappingTableIndicates the name and the index mapping table of a service instance. SEQUENCE OF HwSINameToIndexMappingEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.7 |
hwSINameToIndexMappingEntryIndicates the name and the index mapping table entry of a service instance. HwSINameToIndexMappingEntry .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1 |
hwSINameIndicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte. OCTET STRING .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1.1 |
hwSIIndexIndicates the index of a service instance.It begins with one.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1.11 |
hwMinMNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.2 |
hwMinMMacTnlUpIndicates the Up alarm of the mac-tunnel.
This object forms a pair with the following hwMinMMacTnlDown. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.133.1.2.1 |
hwMinMMacTnlDownIndicates the Down alarm of the mac-tunnel.
This object forms a pair with the previous hwMinMMacTnlUp. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.133.1.2.2 |
hwMinMSIUpIndicates the Up alarm of a service instance.
This object forms a pair with the following hwMinMSIDown. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.133.1.2.3 |
hwMinMSIDownIndicates the Down alarm of a service instance.
This object forms a pair with the previous hwMinMSIUp. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.133.1.2.4 |
hwMinMMacTnlCCFaultAlarmIndicates an alarm on the connectivity of fault. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.133.1.2.5 |
hwMinMMacTnlSwitchIndicates the Aps protection group switchover alarm of the mac-tunnel.
This object forms a pair with the following hwMinMMacTnlRevertive.
hwMinMMacTnlName: indicates the name of the primary tunnel.
hwMinMMacTnlDMac: indicates the destination MAC address of the primary tunnel.
hwMinMMacTnlBVlanID: indicates the BVLANID of the primary tunnel.
hwMinMProtectMacTnlName: Indicates the name of the backup tunnel.
hwMinMProtectSwitchOperation: Indicates the switchover commands for the Aps protection group of mac-tunnels.
hwMinMProtectMacTnlBVlanID: indicates the BVLANID of the backup tunnel.
hwMinMProtectMacTnlDMac:indicates the destination MAC address of the backup tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.133.1.2.6 |
hwMinMMacTnlRevertiveIndicates the Aps protection group switchover alarm of the mac-tunnel.
This object forms a pair with the previous hwMinMMacTnlSwitch.
hwMinMMacTnlName: indicates the name of the primary tunnel.
hwMinMMacTnlDMac: indicates the destination MAC address of the primary tunnel.
hwMinMMacTnlBVlanID: indicates the BVLANID of the primary tunnel.
hwMinMProtectMacTnlName: Indicates the name of the backup tunnel.
hwMinMProtectSwitchOperation: Indicates the switchover commands for the Aps protection group of mac-tunnels.
hwMinMProtectMacTnlBVlanID: indicates the BVLANID of the backup tunnel.
hwMinMProtectMacTnlDMac:indicates the destination MAC address of the backup tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.133.1.2.7 |
hwMinMSIMacLimitNumRaisingThresholdIndicates the alarm of the mac limiting number beyond the Threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.133.1.2.8 |
hwMinMConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.3 |
hwMinMGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.133.1.3.1 |