HUAWEI-PIM-STD-MIB
AI MIB Summary
The HUAWEI-PIM-STD-MIB enables monitoring and management of Protocol Independent Multicast (PIM) routing instances on Huawei network devices, specifically tracking PIM neighbor adjacencies, interface states, and multicast group membership data. This module facilitates the collection of protocol-specific counters and status variables required for troubleshooting multicast routing topology and ensuring PIM-SM or PIM-DM operational integrity.
The MIB module for management of PIM routers.
Huawei Technologies co.,Ltd . Supplementary information may be available at:
http://www.huawei.com
Main OID:
hwPimStdMib.1.3.6.1.4.1.2011.5.25.149.4
257
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
257 total| Object Name |
|---|
hwMcast OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149 |
hwPimStdMibThe MIB module for management of PIM routers.
Huawei Technologies co.,Ltd . Supplementary information may
be available at:
http://www.huawei.com MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.149.4 |
hwPimNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.4.0 |
hwPimNeighborLossA hwPimNeighborLoss notification signifies the loss of an
adjacency with a neighbor. This notification should be
generated when the neighbor is lost.
This notification is generated whenever the counter
hwPimNeighborLossCount is incremented, subject
to the rate limit specified by
hwPimNeighborLossNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.1 |
hwPimInvalidRegisterA hwPimInvalidRegister notification signifies that an invalid
PIM Register message was received by this device.
This notification is generated whenever the counter
hwPimInvalidRegisterMsgsRcvd is incremented, subject to the
rate limit specified by
hwPimInvalidRegisterNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.2 |
hwPimInvalidJoinPruneA hwPimInvalidJoinPrune notification signifies that an
invalid PIM Join/Prune message was received by this device.
This notification is generated whenever the counter
hwPimInvalidJoinPruneMsgsRcvd is incremented, subject to the
rate limit specified by
hwPimInvalidJoinPruneNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.3 |
hwPimRpMappingChangeA hwPimRpMappingChange notification signifies a change to the
active RP mapping on this device.
This notification is generated whenever the counter
hwPimRpMappingChangeCount is incremented, subject to the
rate limit specified by
pimRPMappingChangeNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.4 |
hwPimInterfaceElectionA hwPimInterfaceElection notification signifies that a new DR
or DF has been elected on a network.
This notification is generated whenever the counter
hwPimInterfaceElectionWinCount is incremented, subject to the
rate limit specified by
hwPimInterfaceElectionNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.5 |
hwPimNeighborAddA hwPimNeighborAdd notification signifies the new neighbor.
This notification should be generated when receiving the hello
report of a new neighbor.
This notification is generated whenever the counter
hwPimNeighborAddCount is incremented, subject
to the rate limit specified by
hwPimNeighborAddNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.6 |
hwPimGRStartA hwPimGRStart notification signifies that the router enters
the PIM GR state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.7 |
hwPimGREndA hwPimGREnd notification signifies that the router leaves
the PIM GR state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.8 |
hwPimMrtLimitA hwPimMrtLimit notification signifies that PIM entries cannot be
created because the upper limit is crossed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.9 |
hwPimNeighborUnavailableA hwPimNeighborUnavailable notification signifies that the PIM neighbor is unavailable. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.10 |
hwPimNeighborUnavailableClearA hwPimNeighborUnavailableClear notification signifies that the PIM neighbor is available. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.11 |
hwPimMrtLimitClearA hwPimMrtLimit notification signifies that PIM entries can created. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.12 |
hwPimStarGThresholdExceedA hwPimStarGThresholdExceed notification signifies that PIM (*, G) entries count of all instances reached the upper threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.13 |
hwPimStarGThresholdExceedClearA hwPimStarGThresholdExceedClear notification signifies that PIM (*, G) entries count of all instances fell below the lower threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.14 |
hwPimStarGExceedA hwPimStarGExceed notification signifies that PIM (*, G) entries count of all instances reached the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.15 |
hwPimStarGExceedClearA hwPimStarGExceedClear notification signifies that PIM(*, G) entries count of all instances fell below the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.16 |
hwPimSGThresholdExceedA hwPimSGThresholdExceed notification signifies that PIM (S, G) entries count of all instances reached the upper threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.17 |
hwPimSGThresholdExceedClearA hwPimSGThresholdExceedClear notification signifies that PIM (S, G) entries count of all instances fell below the lower threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.18 |
hwPimSGExceedA hwPimSGExceed notification signifies that PIM (S, G) entries count of all instances reached the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.19 |
hwPimSGExceedClearA hwPimSGExceedClear notification signifies that the number of PIM(S, G) entries count of all instances fell below the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.149.4.0.20 |
hwPim OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.4.1 |
hwPimInterfaceTableThe (conceptual) table listing the router's PIM interfaces.
PIM is enabled on all interfaces listed in this table. SEQUENCE OF HwPimInterfaceEntry .1.3.6.1.4.1.2011.5.25.149.4.1.1 |
hwPimInterfaceEntryAn entry (conceptual row) in the hwPimInterfaceTable. This
entry is preserved on agent restart. HwPimInterfaceEntry .1.3.6.1.4.1.2011.5.25.149.4.1.1.1 |
hwPimInterfaceIfIndexThe ifIndex value of this PIM interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.1 |
hwPimInterfaceIpVersionThe IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g. IPv4
and IPv6, however the traffic is considered to be logically
separate. InetVersion (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.2 |
hwPimInterfaceAddressTypeThe address type of this PIM interface.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.3 |
hwPimInterfaceAddressThe primary IP address of this router on this PIM
interface. The InetAddressType is given by the
hwPimInterfaceAddressType object.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.4 |
hwPimInterfaceGenerationIdValueThe value of the Generation ID this router inserted in the
last PIM Hello message it sent on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.5 |
hwPimInterfaceDrThe primary IP address of the Designated Router on this PIM
interface. The InetAddressType is given by the
hwPimInterfaceAddressType object.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.6 |
hwPimInterfaceDrPriorityThe Designated Router Priority value inserted into the DR
Priority option on this interface. Numerically higher
values for this object indicate higher priorities.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.7 |
hwPimInterfaceDrPriorityEnabledEvaluates to TRUE if all routers on this interface are
using the DR Priority option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.8 |
hwPimInterfaceHelloIntervalThe frequency at which PIM Hello messages are transmitted
on this interface. This object corresponds to the
'Hello_Period' timer value defined in the PIM-SM
specification. A value of zero represents an 'infinite'
interval, and indicates that periodic PIM Hello messages
should not be sent on this interface.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.9 |
hwPimInterfaceTrigHelloIntervalThe maximum time before this router sends a triggered PIM
Hello message on this interface. This object corresponds to
the 'Trigered_Hello_Delay' timer value defined in the PIM-SM
specification. A value of zero has no special meaning and
indicates that triggered PIM Hello messages should always be
sent immediately.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.10 |
hwPimInterfaceHelloHoldtimeThe value set in the Holdtime field of PIM Hello messages
transmitted on this interface. A value of 65535 represents
an 'infinite' holdtime. Implementations are recommended
to use a holdtime that is 3.5 times the value of
hwPimInterfaceHelloInterval, or 65535 if
hwPimInterfaceHelloInterval is set to zero.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.11 |
hwPimInterfaceJoinPruneIntervalThe frequency at which this router sends PIM Join/Prune
messages on this PIM interface. This object corresponds to
the 't_periodic' timer value defined in the PIM-SM
specification. A value of zero represents an 'infinite'
interval, and indicates that periodic PIM Join/Prune
messages should not be sent on this interface.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.12 |
hwPimInterfaceJoinPruneHoldtimeThe value inserted into the Holdtime field of a PIM
Join/Prune message sent on this interface. A value of 65535
represents an 'infinite' holdtime. Implementations are
recommended to use a holdtime that is 3.5 times the value of
hwPimInterfaceJoinPruneInterval, or 65535 if
hwPimInterfaceJoinPruneInterval is set to zero. PIM-DM
implementations are recommended to use the value of
hwPimInterfacePruneLimitInterval.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.13 |
hwPimInterfaceDfElectionRobustnessThe minimum number of PIM DF-Election messages that must be
lost in order for DF election on this interface to fail.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.14 |
hwPimInterfaceLanDelayEnabledEvaluates to TRUE if all routers on this interface are
using the LAN Prune Delay option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.15 |
hwPimInterfacePropagationDelayThe expected propagation delay between PIM routers on this
network or link.
This router inserts this value into the Propagation_Delay
field of the LAN Prune Delay option in the PIM Hello
messages sent on this interface. Implementations should
enforce a lower bound on the permitted values for this
object to allow for scheduling and processing delays within
the local router.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.16 |
hwPimInterfaceOverrideIntervalThe value this router inserts into the Override_Interval
field of the LAN Prune Delay option in the PIM Hello
messages it sends on this interface.
When overriding a prune, PIM routers pick a random timer
duration up to the value of this object. The more PIM
routers that are active on a network, the more likely it is
that the prune will be overridden after a small proportion
of this time has elapsed.
The more PIM routers are active on this network, the larger
this object should be to obtain an optimal spread of prune
override latencies.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.17 |
hwPimInterfaceEffectPropagDelayThe Effective Propagation Delay on this interface. This
object is always 500 if hwPimInterfaceLanDelayEnabled is
FALSE.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.18 |
hwPimInterfaceEffectOverrideIvlThe Effective Override Interval on this interface. This
object is always 2500 if hwPimInterfaceLanDelayEnabled is
FALSE.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.19 |
hwPimInterfaceSuppressionEnabledWhether join suppression is enabled on this interface.
This object is always TRUE if hwPimInterfaceLanDelayEnabled is
FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.20 |
hwPimInterfaceBidirCapableEvaluates to TRUE if all routers on this interface are
using the Bidirectional-PIM Capable option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.21 |
hwPimInterfaceDomainBorderWhether or not this interface is a PIM domain border. This
includes acting as a border for PIM Bootstrap Router (BSR)
messages, if the BSR mechanism is in use.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.22 |
hwPimInterfaceStubInterfaceWhether this interface is a 'stub interface'. If this
object is set to TRUE, then no PIM packets are sent out this
interface, and any received PIM packets are ignored.
Setting this object to TRUE is a security measure for
interfaces towards untrusted hosts. This allows an
interface to be configured for use with IGMP (Internet Group
Management Protocol) or MLD (Multicast Listener Discovery)
only, which protects the PIM router from forged PIM messages
on the interface.
To communicate with other PIM routers using this interface,
this object must remain set to FALSE.
Changing the value of this object while the interface is
operational causes the interface to be deactivated and
then reactivated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.23 |
hwPimInterfacePruneLimitIntervalThe minimum interval that must transpire between two
successive Prunes sent by a router. This object corresponds
to the 't_limit' timer value defined in the PIM-DM
specification. This object is used only by PIM-DM.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.24 |
hwPimInterfaceGraftRetryIntervalThe minimum interval that must transpire between two
successive Grafts sent by a router. This object corresponds
to the 'Graft_Retry_Period' timer value defined in the
PIM-DM specification. This object is used only by PIM-DM.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.25 |
hwPimInterfaceSrPriorityEnabledEvaluates to TRUE if all routers on this interface are
using the State Refresh option. This object is used only by
PIM-DM.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.26 |
hwPimInterfaceStatusThe status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
This status object can be set to active(1) without setting
any other columnar objects in this entry.
All writeable objects in this entry can be modified when the
status of this entry is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.27 |
hwPimInterfaceStorageTypeThe storage type for this row. Rows having the value
'permanent' need not allow write-access to any columnar
objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.28 |
hwPimInterfaceNameThe name of this PIM interface.ro DisplayString .1.3.6.1.4.1.2011.5.25.149.4.1.1.1.29 |
hwPimNeighborTableThe (conceptual) table listing the router's PIM neighbors. SEQUENCE OF HwPimNeighborEntry .1.3.6.1.4.1.2011.5.25.149.4.1.2 |
hwPimNeighborEntryAn entry (conceptual row) in the hwPimNeighborTable. HwPimNeighborEntry .1.3.6.1.4.1.2011.5.25.149.4.1.2.1 |
hwPimNeighborIfIndexThe value of ifIndex for the interface used to reach this
PIM neighbor. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.1 |
hwPimNeighborAddressTypeThe address type of this PIM neighbor. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.2 |
hwPimNeighborAddressThe primary IP address of this PIM neighbor. The
InetAddressType is given by the hwPimNeighborAddressType
object. InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.3 |
hwPimNeighborGenerationIdPresentEvaluates to TRUE if this neighbor is using the Generation
ID option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.4 |
hwPimNeighborGenerationIdValueThe value of the Generation ID from the last PIM Hello
message received from this neighbor. This object is always
zero if hwPimNeighborGenerationIdPresent is FALSE.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.5 |
hwPimNeighborUpTimeThe time since this PIM neighbor (last) became a neighbor
of the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.6 |
hwPimNeighborExpiryTimeThe minimum time remaining before this PIM neighbor will
be aged out. The value zero indicates that this PIM
neighbor will never be aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.7 |
hwPimNeighborDrPriorityPresentEvaluates to TRUE if this neighbor is using the DR Priority
option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.8 |
hwPimNeighborDrPriorityThe value of the Designated Router Priority from the last
PIM Hello message received from this neighbor. This object
is always zero if hwPimNeighborDrPriorityPresent is FALSE.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.9 |
hwPimNeighborLanPruneDelayPresentEvaluates to TRUE if this neighbor is using the LAN Prune
Delay option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.10 |
hwPimNeighborTBitWhether the T bit was set in the LAN Prune Delay option
received from this neighbor. The T bit specifies the
ability of the neighbor to disable join suppression. This
object is always TRUE if hwPimNeighborLanPruneDelayPresent is
FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.11 |
hwPimNeighborPropagationDelayThe value of the Propagation_Delay field of the LAN Prune
Delay option received from this neighbor. This object is
always zero if hwPimNeighborLanPruneDelayPresent is FALSE.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.12 |
hwPimNeighborOverrideIntervalThe value of the Override_Interval field of the LAN Prune
Delay option received from this neighbor. This object is
always zero if hwPimNeighborLanPruneDelayPresent is FALSE.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.13 |
hwPimNeighborBidirCapableEvaluates to TRUE if this neighbor is using the
Bidirectional-PIM Capable option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.14 |
hwPimNeighborSrCapableEvaluates to TRUE if this neighbor is using the State
Refresh Capable option. This object is used only by
PIM-DM.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.15 |
hwPimNeighborIfNameThe name for the interface used to reach this
PIM neighbor.ro DisplayString .1.3.6.1.4.1.2011.5.25.149.4.1.2.1.16 |
hwPimNbrSecAddressTableThe (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the hwPimNeighborTable defined above). SEQUENCE OF HwPimNbrSecAddressEntry .1.3.6.1.4.1.2011.5.25.149.4.1.3 |
hwPimNbrSecAddressEntryAn entry (conceptual row) in the hwPimNbrSecAddressTable. HwPimNbrSecAddressEntry .1.3.6.1.4.1.2011.5.25.149.4.1.3.1 |
hwPimNbrSecAddressIfIndexThe value of ifIndex for the interface used to reach this
PIM neighbor. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.3.1.1 |
hwPimNbrSecAddressTypeThe address type of this PIM neighbor. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.3.1.2 |
hwPimNbrSecAddressPrimaryThe primary IP address of this PIM neighbor. The
InetAddressType is given by the hwPimNbrSecAddressType
object. InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.3.1.3 |
hwPimNbrSecAddressThe secondary IP address of this PIM neighbor. The
InetAddressType is given by the hwPimNbrSecAddressType
object.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.3.1.4 |
hwPimStarGTableThe (conceptual) table listing the non-interface specific
(*,G) state that PIM has. SEQUENCE OF HwPimStarGEntry .1.3.6.1.4.1.2011.5.25.149.4.1.4 |
hwPimStarGEntryAn entry (conceptual row) in the hwPimStarGTable. HwPimStarGEntry .1.3.6.1.4.1.2011.5.25.149.4.1.4.1 |
hwPimStarGAddressTypeThe address type of this multicast group. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.1 |
hwPimStarGGrpAddressThe multicast group address. The InetAddressType is given
by the hwPimStarGAddressType object. InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.2 |
hwPimStarGUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.3 |
hwPimStarGPimModeWhether this entry represents an ASM (Any Source Multicast,
used with PIM-SM) or BIDIR-PIM group.ro HWPimMode { asm(3), bidir(4) } .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.4 |
hwPimStarGRpAddressTypeThe address type of the Rendezvous Point (RP), or
unknown(0) if the RP address is unknown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.5 |
hwPimStarGRpAddressThe address of the Rendezvous Point (RP) for the group.
The InetAddressType is given by the hwPimStarGRpAddressType.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.6 |
hwPimStarGPimModeOriginThe mechanism by which the PIM mode and RP for the group
were learned.ro HWPimGroupMappingOriginType .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.7 |
hwPimStarGRpIsLocalWhether the local router is the RP for the group.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.8 |
hwPimStarGUpstreamJoinStateWhether the local router should join the RP tree for the
group. This corresponds to the state of the upstream (*,G)
state machine in the PIM-SM specification.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.9 |
hwPimStarGUpstreamJoinTimerThe time remaining before the local router next sends a
periodic (*,G) Join message on hwPimStarGRpfIfIndex. This
timer is called the (*,G) Upstream Join Timer in the PIM-SM
specification. This object is zero if the timer is not
running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.10 |
hwPimStarGUpstreamNeighborTypeThe primary address type of the upstream neighbor, or
unknown(0) if the upstream neighbor address is unknown or is
not a PIM neighbor.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.11 |
hwPimStarGUpstreamNeighborThe primary address of the neighbor on hwPimStarGRpfIfIndex
that the local router is sending periodic (*,G) Join
messages to. The InetAddressType is given by the
hwPimStarGUpstreamNeighborType object. This address is called
RPF'(*,G) in the PIM-SM specification.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.12 |
hwPimStarGRpfIfIndexThe value of ifIndex for the RPF interface towards the RP,
or zero if the RPF interface is unknown.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.13 |
hwPimStarGRpfNextHopTypeThe address type of the RPF next hop towards the RP, or
unknown(0) if the RPF next hop is unknown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.14 |
hwPimStarGRpfNextHopThe address of the RPF next hop towards the RP. The
InetAddressType is given by the hwPimStarGRpfNextHopType
object. This address is called MRIB.next_hop(RP(G))
in the PIM-SM specification.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.15 |
hwPimStarGRpfRouteProtocolThe routing mechanism via which the route used to find the
RPF interface towards the RP was learned.ro IANAipRouteProtocol (IANA-RTPROTO-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.16 |
hwPimStarGRpfRouteAddressThe IP address which when combined with the corresponding
value of hwPimStarGRpfRoutePrefixLength identifies the route
used to find the RPF interface towards the RP. The
InetAddressType is given by the hwPimStarGRpfNextHopType
object.
This address object is only significant up to
hwPimStarGRpfRoutePrefixLength bits. The remainder of the
address bits are zero.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.17 |
hwPimStarGRpfRoutePrefixLengthThe prefix length which when combined with the
corresponding value of hwPimStarGRpfRouteAddress identifies
the route used to find the RPF interface towards the RP.
The InetAddressType is given by the hwPimStarGRpfNextHopType
object.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.18 |
hwPimStarGRpfRouteMetricPrefThe metric preference of the route used to find the RPF
interface towards the RP.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.19 |
hwPimStarGRpfRouteMetricThe routing metric of the route used to find the RPF
interface towards the RP.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.4.1.20 |
hwPimStarGITableThe (conceptual) table listing the interface-specific (*,G)
state that PIM has. SEQUENCE OF HwPimStarGIEntry .1.3.6.1.4.1.2011.5.25.149.4.1.5 |
hwPimStarGIEntryAn entry (conceptual row) in the hwPimStarGITable. HwPimStarGIEntry .1.3.6.1.4.1.2011.5.25.149.4.1.5.1 |
hwPimStarGIIfIndexThe ifIndex of the interface that this entry corresponds
to. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.1 |
hwPimStarGIUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.2 |
hwPimStarGILocalMembershipWhether the local router has (*,G) local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_include(*,G,I) in the
PIM-SM specification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.3 |
hwPimStarGIJoinPruneStateThe state resulting from (*,G) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (*,G) state machine in the
PIM-SM specification.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.4 |
hwPimStarGIPrunePendingTimerThe time remaining before the local router acts on a (*,G)
Prune message received on this interface, during which the
router is waiting to see whether another downstream router
will override the Prune message. This timer is called the
(*,G) Prune-Pending Timer in the PIM-SM specification. This
object is zero if the timer is not running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.5 |
hwPimStarGIJoinExpiryTimerThe time remaining before (*,G) Join state for this
interface expires. This timer is called the (*,G) Join
Expiry Timer in the PIM-SM specification. This object is
zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.6 |
hwPimStarGIAssertStateThe (*,G) Assert state for this interface. This
corresponds to the state of the per-interface (*,G) Assert
state machine in the PIM-SM specification. If
hwPimStarGPimMode is 'bidir', this object must be 'noInfo'.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.7 |
hwPimStarGIAssertTimerIf hwPimStarGIAssertState is 'iAmAssertWinner', this is the
time remaining before the local router next sends a (*,G)
Assert message on this interface. If hwPimStarGIAssertState
is 'iAmAssertLoser', this is the time remaining before the
(*,G) Assert state expires. If hwPimStarGIAssertState is
'noInfo', this is zero. This timer is called the (*,G)
Assert Timer in the PIM-SM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.8 |
hwPimStarGIAssertWinnerAddressTypeIf hwPimStarGIAssertState is 'iAmAssertLoser', this is the
address type of the assert winner; otherwise, this object is
unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.9 |
hwPimStarGIAssertWinnerAddressIf hwPimStarGIAssertState is 'iAmAssertLoser', this is the
address of the assert winner. The InetAddressType is given
by the hwPimStarGIAssertWinnerAddressType object.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.10 |
hwPimStarGIAssertWinnerMetricPrefIf hwPimStarGIAssertState is 'iAmAssertLoser', this is the
metric preference of the route to the RP advertised by the
assert winner; otherwise, this object is zero.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.11 |
hwPimStarGIAssertWinnerMetricIf hwPimStarGIAssertState is 'iAmAssertLoser', this is the
routing metric of the route to the RP advertised by the
assert winner; otherwise, this object is zero.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.5.1.12 |
hwPimSGTableThe (conceptual) table listing the non-interface specific
(S,G) state that PIM has. SEQUENCE OF HwPimSGEntry .1.3.6.1.4.1.2011.5.25.149.4.1.6 |
hwPimSGEntryAn entry (conceptual row) in the hwPimSGTable. HwPimSGEntry .1.3.6.1.4.1.2011.5.25.149.4.1.6.1 |
hwPimSGAddressTypeThe address type of the source and multicast group for this
entry. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.1 |
hwPimSGGrpAddressThe multicast group address for this entry. The
InetAddressType is given by the hwPimSGAddressType object. InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.2 |
hwPimSGSrcAddressThe source address for this entry. The InetAddressType is
given by the hwPimSGAddressType object. InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.3 |
hwPimSGUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.4 |
hwPimSGPimModeWhether hwPimSGGrpAddress is an SSM (Source Specific
Multicast, used with PIM-SM) or ASM (Any Source Multicast,
used with PIM-SM) group.ro HWPimMode { ssm(2), asm(3) } .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.5 |
hwPimSGUpstreamJoinStateWhether the local router should join the shortest-path tree
for the source and group represented by this entry. This
corresponds to the state of the upstream (S,G) state machine
in the PIM-SM specification.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.6 |
hwPimSGUpstreamJoinTimerThe time remaining before the local router next sends a
periodic (S,G) Join message on hwPimSGRpfIfIndex. This timer
is called the (S,G) Upstream Join Timer in the PIM-SM
specification. This object is zero if the timer is not
running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.7 |
hwPimSGUpstreamNeighborThe primary address of the neighbor on hwPimSGRpfIfIndex that
the local router is sending periodic (S,G) Join messages to.
This is zero if the RPF next hop is unknown or is not a
PIM neighbor. The InetAddressType is given by the
hwPimSGAddressType object. This address is called RPF'(S,G)
in the PIM-SM specification.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.8 |
hwPimSGRpfIfIndexThe value of ifIndex for the RPF interface towards the
source, or zero if the RPF interface is unknown.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.9 |
hwPimSGRpfNextHopTypeThe address type of the RPF next hop towards the source, or
unknown(0) if the RPF next hop is unknown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.10 |
hwPimSGRpfNextHopThe address of the RPF next hop towards the source. The
InetAddressType is given by the hwPimSGRpfNextHopType. This
address is called MRIB.next_hop(S) in the PIM-SM
specification.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.11 |
hwPimSGRpfRouteProtocolThe routing mechanism via which the route used to find the
RPF interface towards the source was learned.ro IANAipRouteProtocol (IANA-RTPROTO-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.12 |
hwPimSGRpfRouteAddressThe IP address which when combined with the corresponding
value of hwPimSGRpfRoutePrefixLength identifies the route used
to find the RPF interface towards the source. The
InetAddressType is given by the hwPimSGRpfNextHopType object.
This address object is only significant up to
hwPimSGRpfRoutePrefixLength bits. The remainder of the
address bits are zero.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.13 |
hwPimSGRpfRoutePrefixLengthThe prefix length which when combined with the
corresponding value of hwPimSGRpfRouteAddress identifies the
route used to find the RPF interface towards the source.
The InetAddressType is given by the hwPimSGRpfNextHopType
object.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.14 |
hwPimSGRpfRouteMetricPrefThe metric preference of the route used to find the RPF
interface towards the source.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.15 |
hwPimSGRpfRouteMetricThe routing metric of the route used to find the RPF
interface towards the source.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.16 |
hwPimSGSptBitWhether the SPT bit is set; and therefore whether
forwarding is taking place on the shortest-path tree.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.17 |
hwPimSGKeepaliveTimerThe time remaining before, in the absence of explicit (S,G)
local membership or (S,G) Join messages received to maintain
it, this (S,G) state expires. This timer is called the
(S,G) Keepalive Timer in the PIM-SM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.18 |
hwPimSGDrRegisterStateWhether the local router should encapsulate (S,G) data
packets in Register messages and send them to the RP. This
corresponds to the state of the per-(S,G) Register state
machine in the PIM-SM specification. This object is always
'noInfo' unless hwPimSGPimMode is 'asm'.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.19 |
hwPimSGDrRegisterStopTimerIf hwPimSGDrRegisterState is 'prune', this is the time
remaining before the local router sends a Null-Register
message to the RP. If hwPimSGDrRegisterState is
'joinPending', this is the time remaining before the local
router resumes encapsulating data packets and sending them
to the RP. Otherwise, this is zero. This timer is called
the Register-Stop Timer in the PIM-SM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.20 |
hwPimSGRpRegisterPmbrAddressTypeThe address type of the first PIM Multicast Border Router
to send a Register message with the Border bit set. This
object is unknown(0) if the local router is not the RP for
the group.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.21 |
hwPimSGRpRegisterPmbrAddressThe IP address of the first PIM Multicast Border Router to
send a Register message with the Border bit set. The
InetAddressType is given by the
hwPimSGRpRegisterPmbrAddressType object.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.22 |
hwPimSGUpstreamPruneStateWhether the local router has pruned itself from the tree.
This corresponds to the state of the upstream prune (S,G)
state machine in the PIM-DM specification. This object is
used only by PIM-DM.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.23 |
hwPimSGUpstreamPruneLimitTimerThe time remaining before the local router may send a (S,G)
Prune message on hwPimSGRpfIfIndex. This timer is called the
(S,G) Prune Limit Timer in the PIM-DM specification. This
object is zero if the timer is not running. This object is
used only by PIM-DM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.24 |
hwPimSGOriginatorStateWhether the router is an originator for an (S,G) message
flow. This corresponds to the state of the per-(S,G)
Originator state machine in the PIM-DM specification. This
object is used only by PIM-DM.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.25 |
hwPimSGSourceActiveTimerIf hwPimSGOriginatorState is 'originator', this is the time
remaining before the local router reverts to a notOriginator
state. Otherwise, this is zero. This timer is called the
Source Active Timer in the PIM-DM specification. This
object is used only by PIM-DM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.26 |
hwPimSGStateRefreshTimerIf hwPimSGOriginatorState is 'originator', this is the time
remaining before the local router sends a State Refresh
message. Otherwise, this is zero. This timer is called the
State Refresh Timer in the PIM-DM specification. This
object is used only by PIM-DM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.6.1.27 |
hwPimSGITableThe (conceptual) table listing the interface-specific (S,G)
state that PIM has. SEQUENCE OF HwPimSGIEntry .1.3.6.1.4.1.2011.5.25.149.4.1.7 |
hwPimSGIEntryAn entry (conceptual row) in the hwPimSGITable. HwPimSGIEntry .1.3.6.1.4.1.2011.5.25.149.4.1.7.1 |
hwPimSGIIfIndexThe ifIndex of the interface that this entry corresponds
to. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.1 |
hwPimSGIUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.2 |
hwPimSGILocalMembershipWhether the local router has (S,G) local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_include(S,G,I) in the
PIM-SM specification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.3 |
hwPimSGIJoinPruneStateThe state resulting from (S,G) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (S,G) state machine in the
PIM-SM and PIM-DM specification.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.4 |
hwPimSGIPrunePendingTimerThe time remaining before the local router acts on an (S,G)
Prune message received on this interface, during which the
router is waiting to see whether another downstream router
will override the Prune message. This timer is called the
(S,G) Prune-Pending Timer in the PIM-SM specification. This
object is zero if the timer is not running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.5 |
hwPimSGIJoinExpiryTimerThe time remaining before (S,G) Join state for this
interface expires. This timer is called the (S,G) Join
Expiry Timer in the PIM-SM specification. This object is
zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time. This timer is called the
(S,G) Prune Timer in the PIM-DM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.6 |
hwPimSGIAssertStateThe (S,G) Assert state for this interface. This
corresponds to the state of the per-interface (S,G) Assert
state machine in the PIM-SM specification.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.7 |
hwPimSGIAssertTimerIf hwPimSGIAssertState is 'iAmAssertWinner', this is the time
remaining before the local router next sends a (S,G) Assert
message on this interface. If hwPimSGIAssertState is
'iAmAssertLoser', this is the time remaining before the
(S,G) Assert state expires. If hwPimSGIAssertState is
'noInfo', this is zero. This timer is called the (S,G)
Assert Timer in the PIM-SM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.8 |
hwPimSGIAssertWinnerAddressTypeIf hwPimSGIAssertState is 'iAmAssertLoser', this is the
address type of the assert winner; otherwise, this object is
unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.9 |
hwPimSGIAssertWinnerAddressIf hwPimSGIAssertState is 'iAmAssertLoser', this is the
address of the assert winner. The InetAddressType is given
by the hwPimSGIAssertWinnerAddressType object.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.10 |
hwPimSGIAssertWinnerMetricPrefIf hwPimSGIAssertState is 'iAmAssertLoser', this is the
metric preference of the route to the source advertised by
the assert winner; otherwise, this object is zero.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.11 |
hwPimSGIAssertWinnerMetricIf hwPimSGIAssertState is 'iAmAssertLoser', this is the
routing metric of the route to the source advertised by the
assert winner; otherwise, this object is zero.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.7.1.12 |
hwPimSGRptTableThe (conceptual) table listing the non-interface specific
(S,G,rpt) state that PIM has. SEQUENCE OF HwPimSGRptEntry .1.3.6.1.4.1.2011.5.25.149.4.1.8 |
hwPimSGRptEntryAn entry (conceptual row) in the hwPimSGRptTable. HwPimSGRptEntry .1.3.6.1.4.1.2011.5.25.149.4.1.8.1 |
hwPimSGRptSrcAddressThe source address for this entry. The InetAddressType is
given by the hwPimStarGAddressType object. InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.8.1.1 |
hwPimSGRptUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.8.1.2 |
hwPimSGRptUpstreamPruneStateWhether the local router should prune the source off the RP
tree. This corresponds to the state of the upstream
(S,G,rpt) state machine for triggered messages in the PIM-SM
specification.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.8.1.3 |
hwPimSGRptUpstreamOverrideTimerThe time remaining before the local router sends a
triggered (S,G,rpt) Join message on hwPimStarGRpfIfIndex.
This timer is called the (S,G,rpt) Upstream Override Timer
in the PIM-SM specification. This object is zero if the
timer is not running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.8.1.4 |
hwPimSGRptITableThe (conceptual) table listing the interface-specific
(S,G,rpt) state that PIM has. SEQUENCE OF HwPimSGRptIEntry .1.3.6.1.4.1.2011.5.25.149.4.1.9 |
hwPimSGRptIEntryAn entry (conceptual row) in the hwPimSGRptITable. HwPimSGRptIEntry .1.3.6.1.4.1.2011.5.25.149.4.1.9.1 |
hwPimSGRptIIfIndexThe ifIndex of the interface that this entry corresponds
to. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.9.1.1 |
hwPimSGRptIUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.9.1.2 |
hwPimSGRptILocalMembershipWhether the local router has both (*,G) include local
membership and (S,G) exclude local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_exclude(S,G,I) in the
PIM-SM specification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.9.1.3 |
hwPimSGRptIJoinPruneStateThe state resulting from (S,G,rpt) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (S,G,rpt) state machine in
the PIM-SM specification.ro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.9.1.4 |
hwPimSGRptIPrunePendingTimerThe time remaining before the local router starts pruning
this source off the RP tree. This timer is called the
(S,G,rpt) Prune-Pending Timer in the PIM-SM specification.
This object is zero if the timer is not running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.9.1.5 |
hwPimSGRptIPruneExpiryTimerThe time remaining before (S,G,rpt) Prune state for this
interface expires. This timer is called the (S,G,rpt)
Prune Expiry Timer in the PIM-SM specification. This object
is zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.4.1.9.1.6 |
hwPimGroupMappingTableThe (conceptual) table listing mappings from multicast
group prefixes to the PIM mode and RP address to use for
groups within that group prefix.
Rows in this table are created for a variety of reasons,
indicated by the value of the hwPimGroupMappingOrigin object.
- Rows with a hwPimGroupMappingOrigin value of 'fixed' are
created automatically by the router at startup, to
correspond to the well-defined prefixes of link-local and
unroutable group addresses. These rows are never
destroyed.
- Rows with a hwPimGroupMappingOrigin value of 'embedded' are
created by the router to correspond to group prefixes
that are to be treated as being in Embedded-RP format.
- Rows with a hwPimGroupMappingOrigin value of 'configRp' are
created and destroyed as a result of rows in the
pimStaticRPTable being created and destroyed.
- Rows with a hwPimGroupMappingOrigin value of 'configSsm'
are created and destroyed as a result of configuration of
SSM address ranges to the local router.
- Rows with a hwPimGroupMappingOrigin value of 'bsr' are
created as a result of running the PIM Bootstrap Router
(BSR) mechanism. If the local router is not the elected
BSR, these rows are created to correspond to group
prefixes in the PIM Bootstrap messages received from the
elected BSR. If the local router is the elected BSR,
these rows are created to correspond to group prefixes in
the PIM Bootstrap messages that the local router sends.
In either case, these rows are destroyed when the group
prefixes are timed out by the BSR mechanism.
- Rows with a hwPimGroupMappingOrigin value of 'other' are
created and destroyed according to some other mechanism
not specified here.
Given the collection of rows in this table at any point in
time, the PIM mode and RP address to use for a particular
group is determined using the following algorithm.
1. From the set of all rows, the subset whose group prefix
contains the group in question are selected.
2. If there are no such rows, the behavior is undefined.
3. From the selected subset of rows, the subset that have
the greatest value of hwPimGroupMappingGrpPrefixLength are
selected.
4. If there are multiple selected rows, and a subset are
defined by pimStaticRPTable (hwPimGroupMappingOrigin value
of 'configRp') with pimStaticRPOverrideDynamic set to
TRUE, then this subset is selected.
5. If there are still multiple selected rows, the subset
that have the highest precedence (the lowest numerical
value for hwPimGroupMappingPrecedence) are selected.
6. If there are still multiple selected rows, the row
selected is implementation dependent; the implementation
might or might not apply the PIM hash function to select
the row.
7. The group mode to use is given by the value of
hwPimGroupMappingPimMode from the single selected row; the
RP to use is given by the value of
hwPimGroupMappingRpAddress, unless hwPimGroupMappingOrigin is
'embedded', in which case the RP is extracted from the
group address in question. SEQUENCE OF HwPimGroupMappingEntry .1.3.6.1.4.1.2011.5.25.149.4.1.13 |
hwPimGroupMappingEntryAn entry (conceptual row) in the hwPimGroupMappingTable. HwPimGroupMappingEntry .1.3.6.1.4.1.2011.5.25.149.4.1.13.1 |
hwPimGroupMappingOriginThe mechanism by which this group mapping was learned. HWPimGroupMappingOriginType .1.3.6.1.4.1.2011.5.25.149.4.1.13.1.1 |
hwPimGroupMappingAddressTypeThe address type of the IP multicast group prefix. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.13.1.2 |
hwPimGroupMappingGrpAddressThe IP multicast group address which, when combined with
hwPimGroupMappingGrpPrefixLength, gives the group prefix for
this mapping. The InetAddressType is given by the
hwPimGroupMappingAddressType object.
This address object is only significant up to
hwPimGroupMappingGrpPrefixLength bits. The remainder of the
address bits are zero. This is especially important for
this index field, which is part of the index of this entry.
Any non-zero bits would signify an entirely different
entry. InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.13.1.3 |
hwPimGroupMappingGrpPrefixLengthThe multicast group prefix length, which, when combined
with hwPimGroupMappingGrpAddress, gives the group prefix for
this mapping. The InetAddressType is given by the
hwPimGroupMappingAddressType object. If
hwPimGroupMappingAddressType is 'ipv4' or 'ipv4z', this
object must be in the range 4..32. If
hwPimGroupMappingAddressType is 'ipv6' or 'ipv6z', this object
must be in the range 8..128. InetAddressPrefixLength .1.3.6.1.4.1.2011.5.25.149.4.1.13.1.4 |
hwPimGroupMappingRpAddressTypeThe address type of the RP to be used for groups within
this group prefix, or unknown(0) if no RP is to be used or
if the RP address is unknown. This object must be
unknown(0) if hwPimGroupMappingPimMode is ssm(2), or if
hwPimGroupMappingOrigin is embedded(6). InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.13.1.5 |
hwPimGroupMappingRpAddressThe IP address of the RP to be used for groups within this
group prefix. The InetAddressType is given by the
hwPimGroupMappingRpAddressType object. InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.13.1.6 |
hwPimGroupMappingPimModeThe PIM mode to be used for groups in this group prefix.ro HWPimMode .1.3.6.1.4.1.2011.5.25.149.4.1.13.1.7 |
hwPimGroupMappingPrecedenceThe precedence of this row, used in the algorithm that
determines which row applies to a given group address
(described above). Numerically higher values for this
object indicate lower precedences, with the value zero
denoting the highest precedence.
The absolute values of this object have a significance only
on the local router and do not need to be coordinated with
other routers.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.13.1.8 |
hwPimKeepalivePeriodThe duration of the Keepalive Timer. This is the period
during which the PIM router will maintain (S,G) state in the
absence of explicit (S,G) local membership or (S,G) join
messages received to maintain it. This timer period is
called the Keepalive_Period in the PIM-SM specification. It
is called the SourceLifetime in the PIM-DM specification.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 210 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.14 |
hwPimRegisterSuppressionTimeThe duration of the Register Suppression Timer. This is
the period during which a PIM Designated Router (DR) stops
sending Register-encapsulated data to the Rendezvous Point
(RP) after receiving a Register-Stop message. This object
is used to run timers both at the DR and at the RP. This
timer period is called the Register_Suppression_Time in the
PIM-SM specification.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 60 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.15 |
hwPimStarGEntriesThe number of entries in the hwPimStarGTable.ro Gauge32 .1.3.6.1.4.1.2011.5.25.149.4.1.16 |
hwPimStarGIEntriesThe number of entries in the hwPimStarGITable.ro Gauge32 .1.3.6.1.4.1.2011.5.25.149.4.1.17 |
hwPimSGEntriesThe number of entries in the hwPimSGTable.ro Gauge32 .1.3.6.1.4.1.2011.5.25.149.4.1.18 |
hwPimSGIEntriesThe number of entries in the hwPimSGITable.ro Gauge32 .1.3.6.1.4.1.2011.5.25.149.4.1.19 |
hwPimSGRptEntriesThe number of entries in the hwPimSGRptTable.ro Gauge32 .1.3.6.1.4.1.2011.5.25.149.4.1.20 |
hwPimSGRptIEntriesThe number of entries in the hwPimSGRptITable.ro Gauge32 .1.3.6.1.4.1.2011.5.25.149.4.1.21 |
hwPimOutAssertsThe number of Asserts sent by this router.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter64 .1.3.6.1.4.1.2011.5.25.149.4.1.22 |
hwPimInAssertsThe number of Asserts received by this router. Asserts
are multicast to all routers on a network. This counter is
incremented by all routers that receive an assert, not only
those routers that are contesting the assert.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter64 .1.3.6.1.4.1.2011.5.25.149.4.1.23 |
hwPimLastAssertInterfaceThe interface on which this router most recently sent or
received an assert, or zero if this router has not sent or
received an assert.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.24 |
hwPimLastAssertGroupAddressTypeThe address type of the multicast group address in the most
recently sent or received assert. If this router has not
sent or received an assert then this object is set to
unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.25 |
hwPimLastAssertGroupAddressThe multicast group address in the most recently sent or
received assert. The InetAddressType is given by the
hwPimLastAssertGroupAddressType object.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.26 |
hwPimLastAssertSourceAddressTypeThe address type of the multicast source address in the
most recently sent or received assert. If the most recent
assert was (*,G), or if this router has not sent or received
an assert, then this object is set to unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.27 |
hwPimLastAssertSourceAddressThe multicast source address in the most recently sent or
received assert. The InetAddressType is given by the
hwPimLastAssertSourceAddressType object.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.28 |
hwPimNeighborLossNotificationPeriodThe minimum time that must elapse between hwPimNeighborLoss
notifications originated by this router. The maximum value
65535 represents an 'infinite' time, in which case no
hwPimNeighborLoss notifications are ever sent.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 0 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.29 |
hwPimNeighborLossCountThe number of neighbor loss events that have occurred.
This counter is incremented when the neighbor timer expires.
This counter is incremented whenever a hwPimNeighborLoss
notification would be generated.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.2011.5.25.149.4.1.30 |
hwPimInvalidRegisterNotificationPeriodThe minimum time that must elapse between
hwPimInvalidRegister notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no hwPimInvalidRegister notifications are ever
sent.
The non-zero minimum allowed value provides resilience
against propagation of denial-of-service attacks from the
data and control planes to the network management plane.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 65535 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.31 |
hwPimInvalidRegisterMsgsRcvdThe number of invalid PIM Register messages that have been
received by this device.
A PIM Register message is invalid if either
o the destination address of the Register message does not
match the Group to RP mapping on this device, or
o this device believes the group address to be within an
SSM address range, but this Register implies ASM usage.
These conditions can occur transiently while RP mapping
changes propagate through the network. If this counter is
incremented repeatedly over several minutes, then there is a
persisting configuration error that requires correction.
The active Group to RP mapping on this device is specified
by the object hwPimGroupMappingPimMode. If there is no such
mapping, then the object hwPimGroupMappingPimMode is absent.
The RP address contained in the invalid Register is
hwPimInvalidRegisterRp.
Multicast data carried by invalid Register messages is
discarded. The discarded data is from a source directly
connected to hwPimInvalidRegisterOrigin, and is addressed to
hwPimInvalidRegisterGroup.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.2011.5.25.149.4.1.32 |
hwPimInvalidRegisterAddressTypeThe address type stored in hwPimInvalidRegisterOrigin,
hwPimInvalidRegisterGroup and hwPimInvalidRegisterRp.
If no unexpected Register messages have been received, then
this object is set to unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.33 |
hwPimInvalidRegisterOriginThe source address of the last unexpected Register message
received by this device.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.34 |
hwPimInvalidRegisterGroupThe IP multicast group address to which the last unexpected
Register message received by this device was addressed.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.35 |
hwPimInvalidRegisterRpThe RP address to which the last unexpected Register
message received by this device was delivered.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.36 |
hwPimInvalidJoinPruneNotificationPeriodThe minimum time that must elapse between
hwPimInvalidJoinPrune notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no hwPimInvalidJoinPrune notifications are ever
sent.
The non-zero minimum allowed value provides resilience
against propagation of denial-of-service attacks from the
control plane to the network management plane.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 65535 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.37 |
hwPimInvalidJoinPruneMsgsRcvdThe number of invalid PIM Join/Prune messages that have
been received by this device.
A PIM Join/Prune message is invalid if either
o the Group to RP mapping specified by this message does not
match the Group to RP mapping on this device, or
o this device believes the group address to be within an
SSM address range, but this Join/Prune (*,G) or (S,G,rpt)
implies ASM usage.
These conditions can occur transiently while RP mapping
changes propagate through the network. If this counter is
incremented repeatedly over several minutes, then there is a
persisting configuration error that requires correction.
The active Group to RP mapping on this device is specified
by the object hwPimGroupMappingPimMode. If there is no such
mapping, then the object hwPimGroupMappingPimMode is absent.
The RP address contained in the invalid Join/Prune is
hwPimInvalidJoinPruneRp.
Invalid Join/Prune messages are discarded. This may result
in loss of multicast data affecting listeners downstream of
hwPimInvalidJoinPruneOrigin, for multicast data addressed to
hwPimInvalidJoinPruneGroup.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.2011.5.25.149.4.1.38 |
hwPimInvalidJoinPruneAddressTypeThe address type stored in hwPimInvalidJoinPruneOrigin,
hwPimInvalidJoinPruneGroup and hwPimInvalidJoinPruneRp.
If no unexpected Join/Prune messages have been received,
this object is set to unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.39 |
hwPimInvalidJoinPruneOriginThe source address of the last unexpected Join/Prune
message received by this device.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.40 |
hwPimInvalidJoinPruneGroupThe IP multicast group address carried in the last
unexpected Join/Prune message received by this device.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.41 |
hwPimInvalidJoinPruneRpThe RP address carried in the last unexpected Join/Prune
message received by this device.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.42 |
hwPimRpMappingNotificationPeriodThe minimum time that must elapse between
hwPimRpMappingChange notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no hwPimRpMappingChange notifications are ever
sent.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 65535 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.43 |
hwPimRpMappingChangeCountThe number of changes to active RP mappings on this device.
Information about active RP mappings is available in
hwPimGroupMappingTable. Only changes to active mappings cause
this counter to be incremented. That is, changes that
modify the hwPimGroupMappingEntry with the highest precedence
for a group (lowest value of hwPimGroupMappingPrecedence).
Such changes may result from manual configuration of this
device, or from automatic RP mapping discovery methods
including the PIM Bootstrap Router (BSR) mechanism.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.2011.5.25.149.4.1.44 |
hwPimInterfaceElectionNotificationPeriodThe minimum time that must elapse between
hwPimInterfaceElection notifications originated by this
router. The default value of 65535 represents an 'infinite'
time, in which case no hwPimInterfaceElection notifications
are ever sent.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 65535 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.45 |
hwPimInterfaceElectionWinCountThe number of times this device has been elected DR or DF
on any interface.
Elections occur frequently on newly-active interfaces, as
triggered Hellos establish adjacencies. This counter is not
incremented for elections on an interface until the first
periodic Hello has been sent. If this router is the DR or
DF at the time of sending the first periodic Hello after
interface activation, then this counter is incremented
(once) at that time.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.2011.5.25.149.4.1.46 |
hwPimRefreshIntervalThe interval between successive State Refresh messages sent
by an Originator. This timer period is called the
RefreshInterval in the PIM-DM specification. This object is
used only by PIM-DM.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 60 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.47 |
hwPimDeviceConfigStorageTypeThe storage type used for the global PIM configuration of
this device, comprised of the objects listed below. If this
storage type takes the value 'permanent', write-access to
the listed objects need not be allowed.
The objects described by this storage type are:
hwPimKeepalivePeriod, hwPimRegisterSuppressionTime,
hwPimNeighborLossNotificationPeriod,
hwPimInvalidRegisterNotificationPeriod,
hwPimInvalidJoinPruneNotificationPeriod,
hwPimRpMappingNotificationPeriod,
hwPimInterfaceElectionNotificationPeriod,
hwPimRefreshInterval,
hwPimNeighborAddNotificationPeriod.
DEFVAL { nonVolatile }rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.48 |
hwPimNeighborAddCountThe number of new neighbor found events that have occurred.
This counter is incremented when the new neighbor is come up.
This counter is incremented whenever a hwPimNeighborLoss
notification would be generated.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.2011.5.25.149.4.1.49 |
hwPimNeighborAddNotificationPeriodThe minimum time that must elapse between
hwPimNeighborAdd notifications originated by this
router. The maximum value 65535 represents an 'infinite'
time, in which case no hwPimNeighborAdd notifications
are ever sent.
The storage type of this object is determined by
hwPimDeviceConfigStorageType.
DEFVAL { 0 }rw Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.50 |
hwPimGRStartTimeThe time when PIM entered GR state.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.51 |
hwPimGRIntervalThe minimum PIM GR period.
DEFVAL { 120 }roobsolete Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.52 |
hwPimGREndTimeThe time when PIM left the GR state.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.53 |
hwPimMrtLimitAddressTypeThe address type of the multicast group address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.54 |
hwPimMrtLimitSourceThe source address of the entry.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.55 |
hwPimMrtLimitGroupThe group address of the entry.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.56 |
hwPimInstanceIDThe Instance ID of the trap.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.57 |
hwPimInterfaceCtlMsgCountTableThe (conceptual) table listing the control message counter
of all PIM interfaces. SEQUENCE OF HwPimInterfaceCtlMsgCountEntry .1.3.6.1.4.1.2011.5.25.149.4.1.58 |
hwPimInterfaceCtlMsgCountEntryAn entry (conceptual row) in the hwPimCtlMsgCountTable.
This entry is preserved on agent restart. HwPimInterfaceCtlMsgCountEntry .1.3.6.1.4.1.2011.5.25.149.4.1.58.1 |
hwPimInterfaceCtlMsgCountIfIndexThe ifIndex value of this PIM interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.58.1.1 |
hwPimInterfaceCtlMsgCountIpVersionThe IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g. IPv4
and IPv6, however the traffic is considered to be logically
separate. InetVersion (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.58.1.2 |
hwPimInterfaceCtlMsgCountMsgStateThe PIM control message state. HWPimCtlMsgState .1.3.6.1.4.1.2011.5.25.149.4.1.58.1.3 |
hwPimInterfaceCtlMsgCountAssertThe number of PIM Assert messages on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.58.1.4 |
hwPimInterfaceCtlMsgCountHelloThe number of PIM Hello messages on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.58.1.5 |
hwPimInterfaceCtlMsgCountJoinPruneThe number of PIM Join/Prune messages on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.58.1.6 |
hwPimInterfaceCtlMsgCountBsrThe number of PIM BSR messages on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.58.1.7 |
hwPimGlobalCtlMsgCountTableThe (conceptual) table listing the control message counter on the router. SEQUENCE OF HwPimGlobalCtlMsgCountEntry .1.3.6.1.4.1.2011.5.25.149.4.1.59 |
hwPimGlobalCtlMsgCountEntryAn entry (conceptual row) in the hwPimGlobalCtlMsgCountTable.
This entry is preserved on agent restart. HwPimGlobalCtlMsgCountEntry .1.3.6.1.4.1.2011.5.25.149.4.1.59.1 |
hwPimGlobalCtlMsgCountIpVersionThe IP version of this PIM instance, e.g. IPv4
and IPv6. InetVersion (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.59.1.1 |
hwPimGlobalCtlMsgCountMsgStateThe PIM control message state. HWPimCtlMsgState .1.3.6.1.4.1.2011.5.25.149.4.1.59.1.2 |
hwPimGlobalCtlMsgCountRegisterThe number of PIM Register messages on the router.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.59.1.3 |
hwPimGlobalCtlMsgCountRegisterStopThe number of PIM Register-stop messages on the router.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.59.1.4 |
hwPimGlobalCtlMsgCountProbeThe number of PIM Probe messages on the router.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.59.1.5 |
hwPimGlobalCtlMsgCountCrpThe number of PIM CRP messages on the router.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.59.1.6 |
hwPimInstanceNameThe instance name of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.4.1.60 |
hwPimNeighborNotificationReasonThe reason for trap sending:
1:holdTime expired;
2:Not receive hello for a long time;
3:Interface is down;
4:Receive Hello again;
5:neighbour is deleted;
6:Alarm time out;
7:Receive Hello HoldTime is Zero;
8:Bfd Session is Down;
9:User Operation;
100:Alarm Clearro Enumeration .1.3.6.1.4.1.2011.5.25.149.4.1.61 |
hwPimNotificationAddressTypeThe address type of the multicast group address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.4.1.62 |
hwPimStarGCurrentCountThe current number of PIM (*, G) entries of all instances.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.63 |
hwPimStarGTotalCountThe total number of PIM (*, G) entries of all instances.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.64 |
hwPimStarGThresholdThe threshold value of PIM (*, G) uppper limit(%).ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.65 |
hwPimSGCurrentCountThe current number of PIM (S, G) entries of all instances.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.66 |
hwPimSGTotalCountThe total number of PIM (S, G) entries of all instances.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.67 |
hwPimSGThresholdThe threshold value of PIM (S, G) uppper limit(%).ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.4.1.68 |
hwPimNotificationSrcAddrThe source address of the entry.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.69 |
hwPimNotificationGrpAddrThe group address of the entry.ro InetAddress .1.3.6.1.4.1.2011.5.25.149.4.1.70 |
hwPimMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.4.2 |
hwPimMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.4.2.1 |
hwPimMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.4.2.2 |