IANA-RTPROTO-MIB
IANA-RTPROTO-MIB provides standardized textual conventions to identify specific unicast and multicast routing protocol types (such as OSPF, BGP, or EIGRP) within network management systems. This module enables monitoring tools to distinguish between different routing mechanisms by mapping protocol identifiers to IANA-assigned values rather than relying on vendor-specific enumerations.
Imported Objects
Objects
1 total| Object Name |
|---|
ianaRtProtoMIBThis MIB module defines the IANAipRouteProtocol and
IANAipMRouteProtocol textual conventions for use in MIBs
which need to identify unicast or multicast routing
mechanisms.
Any additions or changes to the contents of this MIB module
require either publication of an RFC, or Designated Expert
Review as defined in RFC 2434, Guidelines for Writing an
IANA Considerations Section in RFCs. The Designated Expert
will be selected by the IESG Area Director(s) of the Routing
Area. MODULE-IDENTITY .1.3.6.1.4.1.17713.1.9.1.84 |
More MIBs from Cambium
Browse all CambiumMIBs →The CAMBIUM-PMP80211-MIB module enables the monitoring and management of Cambium Networks PMP80211 access points, specifically exposing performance metrics such as radio interface statistics, client association states, signal quality indicators, and throughput counters for the 802.11 wireless backhaul and distribution network.
The CAMBIUM-PTP670-MIB enables monitoring and management of Cambium Networks PTP 670 non-line-of-sight wireless Ethernet bridges, exposing critical operational metrics such as link throughput, signal-to-noise ratios, RF power levels, and interface error counters. This module facilitates real-time troubleshooting of NLOS radio performance and connectivity stability for point-to-point wireless backhaul deployments.
The CAMBIUM-PTP650-MIB enables monitoring and management of Cambium Networks PTP 650 non-line-of-sight wireless Ethernet bridges via SNMP, exposing critical operational metrics such as link throughput, signal quality (RSSI/SNR), interface statistics, and device health parameters.
The Motorola-Cpe-PRIVATE-MIB defines the management information tree for the PMP 320 Customer Premises Equipment, enabling monitoring of wireless link parameters, radio interface statistics, and device operational states specific to Motorola's Point-to-Multipoint broadband access architecture.
The CAMBIUM-PTP800-MIB enables SNMP-based monitoring and management of Cambium Networks PTP800 series licensed microwave point-to-point wireless Ethernet bridges, exposing critical operational metrics such as link throughput, signal strength (RSSI/SNR), error counters, interface statistics, and device environmental sensors.
The CAMBIUM-PTP600-MIB enables SNMP-based monitoring and management of Cambium Networks PTP 600 series 300Mbps non-line-of-sight wireless Ethernet bridges, exposing critical operational metrics such as RF link quality, signal strength (RSSI), noise floor, throughput counters, and interface status.