CAMBIUM-PMP80211-MIB
This module contains MIB definitions for APs.
Main OID:
pmpMibTree.1.3.6.1.4.1.17713.21
907
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
907 total| Object Name |
|---|
cambium OBJECT IDENTIFIER .1.3.6.1.4.1.17713 |
pmpMibTreeThis module contains MIB definitions for APs. MODULE-IDENTITY .1.3.6.1.4.1.17713.21 |
cambiumpmp80211SystemTraps OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.0 |
cambiumpmp80211SoftwareUpdateStatusTrapSoftware Update error TRAP. Trap indicating Software Update State. This state is indicated by the included value of cambiumpmp80211GpsFirmwareUpdateError Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.1 |
cambiumpmp80211GPSSyncStatusTrapGPS Sync Status TRAP. Trap indicating GPS Sync State change. This state is indicated by the included value of cambiumToolbarGPSSyncState Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.2 |
cambiumpmp80211SystemUpTrapSystem UP TRAP. Trap indicating SNMP subSystem UP Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.3 |
cambiumpmp80211DFSStatusTrapDFS Status TRAP. Trap indicating DFS Event. This event is indicated by the included value of cambiumDFSStatus Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.4 |
cambiumpmp80211JSONCfgImportTrapJSON configuration import error trap. Trap catches JSON configuration import state. This state is indicated by the included value of cambiumJSONCfgImportError. Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.5 |
cambiumpmp80211JSONCfgExportTrapJSON configuration export error trap. Trap catches JSON configuration export state. This state is indicated by the included value of cambiumJSONCfgExportError. Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.6 |
cambiumpmp80211FullCfgRestoreTrapFull configuration restore error trap. Trap catches full configuration restoring state. This state is indicated by the included value of cambiumFullCfgRestoreError. Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.7 |
cambiumpmp80211FullCfgBackupTrapFull configuration backup error trap. Trap catches full configuration backup state. This state is indicated by the included value of cambiumFullCfgBackUpError. Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.8 |
cambiumpmp80211GpsFirmwareUpdateStatusTrapGPS Update error TRAP. Trap indicating GPS Firmware Update State. This state is indicated by the included value of cambiumpmp80211GpsFirmwareUpdateError Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.9 |
cambiumpmp80211STADropTrapSM Drop trap. Trap catches dropped SM info. Information is contained in the included values of cambiumSTAMAC and cambiumSTADropReason. Device Allocation: AP NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.10 |
cambiumpmp80211SMRegTrapSM Registration trap. Trap catches registered SM info. Information is contained in the included value of cambiumSTAMAC. Device Allocation: AP NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.11 |
cambiumpmp80211SystemRebootTrapSystem reboot trap. Trap indicates that snmpd daemon has been shut down and the system is going to reboot. Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.12 |
cambiumpmp80211SAModeTrapSpectrum Analyzer mode trap. Trap indicates that he system is going to reboot in SA mode. Device Allocation: AP, SM NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.13 |
cambiumpmpETSIframeSkipTrapTo much frame skipped due to CCA. Device Allocation: AP NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.14 |
cambiumpmp80211NetworkEntryFailureTrapSM rejected trap. Trap obtains info about the latest rejected SM. Trap string is contained an information string with rejected reason and MAC of rejected SM. Trap message for a host is consisted of cambiumNetworkEntryFailureSTAMAC and cambiumNetworkEntryFailureReason objects. Device Allocation: AP NOTIFICATION-TYPE .1.3.6.1.4.1.17713.21.0.15 |
cambiumPmp80211SystemStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1 |
cambiumGeneralStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.1 |
cambiumCurrentSWInfoSoftware information - version, etc. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.1 |
cambiumHWInfoHardware SKU: -1 - Not available 0 - 5 GHz Connectorized Radio with Sync 1 - 5 GHz Connectorized Radio 2 - 5 GHz Integrated Radio 3 - 2.4 GHz Connectorized Radio with Sync 4 - 2.4 GHz Connectorized Radio 5 - 2.4 GHz Integrated Radio 6 - Force 200 ROW 7 - Reserved 8 - Force 200 9 - Force 200 FCC 10 - Reserved 11 - Force 180 ROW 12 - Force 180 FCC Device Allocation: AP, SMro Integer32 (-1|0|1|2|3|4|5|6|7|8|9|10|11|12) .1.3.6.1.4.1.17713.21.1.1.2 |
cambiumDateTimeDate and Time in format mm/dd/yyyy:hh:mm:ss Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.3 |
cambiumSystemUptimeDevice UpTime in format days, hours, minutes, and seconds -> dddd:hh:mm:ss Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.4 |
cambiumWirelessMACAddressThe device Wireless MAC address Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.5 |
cambiumDFSStatusDFS Status: 1 - N/A, 2 - Channel Availability Check, 3 - In-Service, 4 - Radar Signal Detected, 5 - In-Service Monitoring at Alternative Channel, 6 - System Not In Service due to DFS Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.1.1.6 |
cambiumEffectiveSyncSourceSync Source Status: 1 - GPS Sync Up, 2 - GPS Sync Down, 3 - CMM4 Sync, 4 - CMM3 Sync Device Allocation: APro Integer32 (1|2|3|4) .1.3.6.1.4.1.17713.21.1.1.7 |
cambiumEffectiveCountryCodeCurrent device Country Code Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.8 |
cambiumEffectiveAntennaGainEffective Antenna Gain in dBi Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.1.1.9 |
cambiumEffectiveTDDRatioEffective DL/UL Ratio: 1 - 75/25, 2 - 50/50, 3 - 30/70, 4 - Flexible Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.1.1.10 |
cambiumEffectiveSSIDEffective SSID Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.1.1.11 |
cambiumEffectiveAuthenticationTypeEffective Authentication Type: 1 - Open, 2 - WPA2, 3 - EAP-TTLSro Integer32 (0|1|2|3) .1.3.6.1.4.1.17713.21.1.1.12 |
cambiumEffectiveDeviceNameEffective Device Name Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.13 |
cambiumUbootVersionU-boot version Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.14 |
cambiumLANMACAddressThe device LAN MAC address Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.15 |
cambiumCurrentuImageIVersionVersion of firmware on uimagei partition Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.1.1.16 |
cambiumCurrentuImageVersionVersion of firmware on uimage partition Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.17 |
cambiumDeviceLatitudeCurrent location information. GPS cordinates (latitude). Device Allocation: AP, SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.1.18 |
cambiumDeviceLongitudeCurrent location information.GPS cordinates (longitude). Device Allocation: AP, SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.1.19 |
sysRebootCounterDevice Reboot Counter Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.1.1.20 |
cambiumDFSStatusStrDFS Status (text) Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.21 |
cambiumDriverTypeSM current driver (TDD - 1, standard Wi-Fi - 2). Device Allocation: SMro Integer32 (1|2) .1.3.6.1.4.1.17713.21.1.1.22 |
cambiumESNDevice' serial number (ESN), based on MAC address Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.30 |
cambiumEPMPMSNCNS MSN serial number: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.1.31 |
cambiumFactoryResetFactory Reset feature state. Default allocation: AP, SMro Integer32 (0|1) .1.3.6.1.4.1.17713.21.1.1.32 |
cambiumSubModeTypeProtocol (Sub) Mode type: 1 - TDD, 2 - TDD PTP, 3 - Standard WiFi, 4 - ePTP Slave, 5 - ePTP Master Device Allocation: AP, SMro Integer32 (1|2|3|4|5) .1.3.6.1.4.1.17713.21.1.1.33 |
cambiumRFStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.2 |
cambiumSTAConnectedRFFrequencyThe frequency connected to AP Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.1 |
cambiumSTAConnectedRFBandwidthConnected RF Bandwidth: 1 for 20MHz, 2 for 40 MHz Device Allocation: SMro Integer32 (1|2) .1.3.6.1.4.1.17713.21.1.2.2 |
cambiumSTADLRSSISM RSSI in dBm Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.3 |
cambiumSTADLCINRSM CINR in dBm Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.4 |
cambiumSTAConductedTXPowerCurrent TX Power (Board Output Conducted) in dBm Device Allocation: SMro Integer32 (-25..30) .1.3.6.1.4.1.17713.21.1.2.5 |
cambiumSTAUplinkMCSModeUL MCS Mode: 1 for MCS1, 2 for MCS2, 3 for MCS3, 4 for MCS4, 5 for MCS5, 6 for MCS6, 7 for MCS7, 9 for MCS9, 10 for MCS10, 11 for MCS11, 12 for MCS12, 13 for MCS13, 14 for MCS14, 15 for MCS15 Device Allocation: SMro Integer32 (1..7|9..15) .1.3.6.1.4.1.17713.21.1.2.6 |
cambiumSTADownlinkMCSModeDL MCS Mode: 1 for MCS1, 2 for MCS2, 3 for MCS3, 4 for MCS4, 5 for MCS5, 6 for MCS6, 7 for MCS7, 9 for MCS9, 10 for MCS10, 11 for MCS11, 12 for MCS12, 13 for MCS13, 14 for MCS14, 15 for MCS15 Device Allocation: SMro Integer32 (1..7|9..15) .1.3.6.1.4.1.17713.21.1.2.7 |
cambiumSTAConnectedAPConnected AP Name (SSID), If no AP is connected, Scanning should be returned Device Allocation: SMro DisplayString .1.3.6.1.4.1.17713.21.1.2.8 |
cambiumSTAPowerControlModePower Control Mode on SM: -1 - No Value, 0 - Disable, 1 - Open Loop, 2 - Close Loop Device Allocation: SMro Integer32 (-1|0|1|2) .1.3.6.1.4.1.17713.21.1.2.9 |
cambiumAPNumberOfConnectedSTANumber Of connected stations Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.10 |
cambiumAPConnectedSTAListTableThis table contains information relevant to the Connected Subscriber Modules: Subscriber Module MAC Address, Subscriber Module AID, Subscriber Module Channel, UL RSSI per SM, DL RSSI per SM, DL CINR per SM, UL CINR per SM, UL MCS Mode per SM, DL MCS Mode per SM, Subscriber Module IP Address Device Allocation: APobsolete SEQUENCE OF CambiumAPConnectedSTAListEntry .1.3.6.1.4.1.17713.21.1.2.11 |
cambiumAPConnectedSTAListEntryWireless parameters mapping for particular station. Device Allocation: APobsolete CambiumAPConnectedSTAListEntry .1.3.6.1.4.1.17713.21.1.2.11.1 |
connectedSTAListMACConnected SM WLAN MAC Address Device Allocation: AProobsolete DisplayString .1.3.6.1.4.1.17713.21.1.2.11.1.1 |
connectedSTAListAIDAssociation ID Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.11.1.2 |
connectedSTAListChannelConnected SM Channel Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.11.1.3 |
connectedSTAListULRSSIUL RSSI per SM Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.11.1.4 |
connectedSTAListDLRSSIDL RSSI per SM Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.11.1.5 |
connectedSTAListULCINRUL CINR per SM Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.11.1.6 |
connectedSTAListDLCINRDL CINR per SM Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.11.1.7 |
connectedSTAListULMCSUL MCS Mode per SM: 1 for MCS1, 2 for MCS2, 3 for MCS3, 4 for MCS4, 5 for MCS5, 6 for MCS6, 7 for MCS7, 9 for MCS9, 10 for MCS10, 11 for MCS11, 12 for MCS12, 13 for MCS13, 14 for MCS14, 15 for MCS15 Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.11.1.8 |
connectedSTAListDLMCSDL MCS Mode per SM: 1 for MCS1, 2 for MCS2, 3 for MCS3, 4 for MCS4, 5 for MCS5, 6 for MCS6, 7 for MCS7, 9 for MCS9, 10 for MCS10, 11 for MCS11, 12 for MCS12, 13 for MCS13, 14 for MCS14, 15 for MCS15 Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.11.1.9 |
connectedSTAListIPConnected SM WLAN IP Address Device Allocation: AProobsolete IpAddress .1.3.6.1.4.1.17713.21.1.2.11.1.10 |
connectedSTAListMirSrcConnected SM MIR source: RADIUS server or profile ID Device Allocation: AProobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.11.1.12 |
connectedSTAListMirULRateConnected SM MIR UL Rate Device Allocation: AProobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.11.1.13 |
connectedSTAListMirDLRateConnected SM MIR DL Rate Device Allocation: AProobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.11.1.14 |
cambiumSTADistanceKmThe distance between AP and SM in kilometers Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.12 |
cambiumSTADistanceMilThe distance between AP and SM in miles Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.13 |
cambiumPropagationDelaySM use the calculated propagation delay to adjust the UL starting time Device Allocation: SMro Integer32 (-2000..5000000) .1.3.6.1.4.1.17713.21.1.2.14 |
cambiumSTAConnectedAPListTableThis table contains information relevant to the Connected Subscriber Modules: SSID - AP Name (SSID) BSSID - AP MAC Address Channel - Operating channgel number Frequency - AP Operating frequency Bandwitdth - AP Operating Bandwidth Rate - AP Operating Rate CINR - AP Signal to Noise Ratio RSSI - AP Received Signal Strength Indication Noise - AP Noise level INT - Beacon Interval NE_ST - Last Network Entry State NE_AGE - Time from last Network Entry event SCAN_AGE - Time from last AP scanning Remaining_SM - Capacity on AP from beacon CAPS - IEEE80211 capability flags MeetNEAttemptCriteria - status for eachAP after scanning Device Allocation: SMobsolete SEQUENCE OF CambiumSTAConnectedAPListEntry .1.3.6.1.4.1.17713.21.1.2.15 |
cambiumSTAConnectedAPListEntryWireless parameters mapping for particular station. Device Allocation: SMobsolete CambiumSTAConnectedAPListEntry .1.3.6.1.4.1.17713.21.1.2.15.1 |
connectedAPListSSIDAP Name (SSID) Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.1 |
connectedAPListBSSIDAP MAC Address Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.2 |
connectedAPListChannelOperating channgel number Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.15.1.3 |
connectedAPListFrequencyAP Operating frequency Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.15.1.4 |
connectedAPListBandwidthAP Operating Bandwidth Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.5 |
connectedAPListRateAP Operating Rate Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.6 |
connectedAPListCINRAP Carrier to Interference Noise Ratio Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.15.1.7 |
connectedAPListRSSIAP Received Signal Strength Indication Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.15.1.8 |
connectedAPListNoiseAP Noise level Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.15.1.9 |
connectedAPListINTBeacon Interval Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.15.1.10 |
connectedAPListNEStateLast Network Entry State Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.15.1.11 |
connectedAPListNEAgeTime from last Network Entry event Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.12 |
connectedAPListScanAgeTime from last AP scanning Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.13 |
connectedAPListRemainingSTARemaining SM on AP Device Allocation: SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.1.2.15.1.14 |
connectedAPListCAPSIEEE80211 capability flags Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.15 |
connectedAPAuthMethodAuthentication Method Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.16 |
connectedAPListMeetNEAttemptCriteriaStatus meet NE attempt criteria Device Allocation: SMroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.15.1.17 |
wirelessInterfaceConnectionStateConnection State: 1 - Scanning, 2 - Connecting, 3 - Connected Device Allocation: SMro Integer32 (1|2|3) .1.3.6.1.4.1.17713.21.1.2.16 |
cambiumSTAPrioritySM priority value: 0 - Normal, 1 - High, 2 - Low Device Allocation: SMro Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.1.2.17 |
cambiumSTADLSNRSM SNR in dBm Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.18 |
cambiumConnectedAPMACAddressConnected AP MAC Address Device Allocation: SMro DisplayString .1.3.6.1.4.1.17713.21.1.2.19 |
cambiumSTAConnectedAPTableThis table contains information relevant to the Connected Subscriber Modules: SSID - AP Name (SSID) BSSID - AP MAC Address Channel - Operating channgel number Frequency - AP Operating frequency Bandwitdth - AP Operating Bandwidth Rate - AP Operating Rate SNR - AP Signal to Noise Ratio RSSI - AP Received Signal Strength Indication Noise - AP Noise level INT - Beacon Interval NE_ST - Last Network Entry State NE_AGE - Time from last Network Entry event SCAN_AGE - Time from last AP scanning Remaining_SM - Capacity on AP from beacon CAPS - IEEE80211 capability flags MeetNEAttemptCriteria - status for eachAP after scanning Device Allocation: SM SEQUENCE OF CambiumSTAConnectedAPEntry .1.3.6.1.4.1.17713.21.1.2.20 |
cambiumSTAConnectedAPEntryWireless parameters mapping for particular station. Device Allocation: SM CambiumSTAConnectedAPEntry .1.3.6.1.4.1.17713.21.1.2.20.1 |
connectedAPSSIDAP Name (SSID) Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.1 |
connectedAPBSSIDAP MAC Address Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.2 |
connectedAPChannelOperating channgel number Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.20.1.3 |
connectedAPFrequencyAP Operating frequency Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.20.1.4 |
connectedAPBandwidthAP Operating Bandwidth Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.5 |
connectedAPRateAP Operating Rate Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.6 |
connectedAPSNRAP Signal to Noise Ratio Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.20.1.7 |
connectedAPRSSIAP Received Signal Strength Indication Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.20.1.8 |
connectedAPNoiseAP Noise level Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.20.1.9 |
connectedAPINTBeacon Interval Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.20.1.10 |
connectedAPNEStateLast Network Entry State Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.20.1.11 |
connectedAPNEAgeTime from last Network Entry event Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.12 |
connectedAPScanAgeTime from last AP scanning Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.13 |
connectedAPRemainingSTARemaining SM on AP Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.20.1.14 |
connectedAPCAPSIEEE80211 capability flags Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.15 |
connectedAPAuthenticationMethodAuthentication Method Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.16 |
connectedAPMeetNEAttemptCriteriaStatus meet NE attempt criteria Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.20.1.17 |
staTxCapacityTX Capacity for SM Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.21 |
staTxQualityTX Quality for SM Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.2.22 |
cambiumAPConnectedSTATableThis table contains information relevant to the Connected Subscriber Modules: Subscriber Module MAC Address, Subscriber Module AID, Subscriber Module Channel, UL RSSI per SM, DL RSSI per SM, UL SNR per SM, DL SNR per SM, UL MCS Mode per SM, DL MCS Mode per SM, Subscriber Module IP Address, SM Priority, MIR, MIR UL Rate, MIR DL Rate, Device Allocation: AP SEQUENCE OF CambiumAPConnectedSTAEntry .1.3.6.1.4.1.17713.21.1.2.30 |
cambiumAPConnectedSTAEntryWireless parameters mapping for particular station. Device Allocation: AP CambiumAPConnectedSTAEntry .1.3.6.1.4.1.17713.21.1.2.30.1 |
connectedSTAMACConnected SM WLAN MAC Address Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.1.2.30.1.1 |
connectedSTAAIDAssociation ID Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.2 |
connectedSTAChannelConnected SM Channel Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.3 |
connectedSTAULRSSIUL RSSI per SM Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.4 |
connectedSTADLRSSIDL RSSI per SM Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.5 |
connectedSTAULSNRUL SNR per SM Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.6 |
connectedSTADLSNRDL SNR per SM Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.7 |
connectedSTAULMCSUL MCS Mode per SM: 1 for MCS1, 2 for MCS2, 3 for MCS3, 4 for MCS4, 5 for MCS5, 6 for MCS6, 7 for MCS7, 9 for MCS9, 10 for MCS10, 11 for MCS11, 12 for MCS12, 13 for MCS13, 14 for MCS14, 15 for MCS15 Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.8 |
connectedSTADLMCSDL MCS Mode per SM: 1 for MCS1, 2 for MCS2, 3 for MCS3, 4 for MCS4, 5 for MCS5, 6 for MCS6, 7 for MCS7, 9 for MCS9, 10 for MCS10, 11 for MCS11, 12 for MCS12, 13 for MCS13, 14 for MCS14, 15 for MCS15 Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.9 |
connectedSTAIPConnected SM WLAN IP Address Device Allocation: APro IpAddress .1.3.6.1.4.1.17713.21.1.2.30.1.10 |
connectedSTAPriorityConnected SM Priority Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.30.1.11 |
connectedSTAMirSrcConnected SM MIR source: RADIUS server or profile ID Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.30.1.12 |
connectedSTAMirULRateConnected SM MIR UL Rate Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.30.1.13 |
connectedSTAMirDLRateConnected SM MIR DL Rate Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.30.1.14 |
connectedSTAClickTHWAddrConnected SM BR or NAT HW addr Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.30.1.15 |
connectedSTAClickTWebPortConnected SM WEB port Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.16 |
connectedSTAClickTWebSecConnected SM WEB security (HTTPS) Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.17 |
connectedSTAClickTHostNameConnected SM Host Name Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.30.1.18 |
connectedSTATXCapacityTX Capacity per SM Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.19 |
connectedSTATXQualityTX Quality per SM Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.20 |
connectedSTAMcastTotalGroupsConnected SM Total multicast groups subscribed count Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.21 |
connectedSTAMcastGRP0Connected SM subscribed multicast group 0 Device Allocation: APro IpAddress .1.3.6.1.4.1.17713.21.1.2.30.1.22 |
connectedSTAMcastGRP1Connected SM subscribed multicast group 1 Device Allocation: APro IpAddress .1.3.6.1.4.1.17713.21.1.2.30.1.23 |
connectedSTAMcastGRP2Connected SM subscribed multicast group 2 Device Allocation: APro IpAddress .1.3.6.1.4.1.17713.21.1.2.30.1.24 |
connectedSTAMcastGRP3Connected SM subscribed multicast group 3 Device Allocation: APro IpAddress .1.3.6.1.4.1.17713.21.1.2.30.1.25 |
connectedSTAMcastGRP4Connected SM subscribed multicast group 4 Device Allocation: APro IpAddress .1.3.6.1.4.1.17713.21.1.2.30.1.26 |
connectedSTASessionTimeConnected SM time since allocation Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.30.1.27 |
connectedSTADLRateMbpsConnected SM DL Rate in MBits/sec Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.30.1.28 |
connectedSTADistanceSTA distnce to AP Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.2.30.1.29 |
cambiumAPBridgeTableThis table contains information relevant to the particular AP bridge interfaces list: Bridge Name, Device MAC Address, Device Port, SM MAC Address, Aging Time in seconds Device Allocation: AP SEQUENCE OF CambiumAPBridgeEntry .1.3.6.1.4.1.17713.21.1.2.40 |
cambiumAPBridgeEntryInterface list for particular bridge. Device Allocation: AP CambiumAPBridgeEntry .1.3.6.1.4.1.17713.21.1.2.40.1 |
camAPBrTabBridgeNameBridge Name Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.40.1.1 |
camAPBrTabDevMACAddressDevice MAC Address Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.40.1.2 |
camAPBrTabDevPortDevice Port Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.40.1.3 |
camAPBrTabSTAMACAddressSM MAC Address Device Allocation: APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.40.1.4 |
camAPBrTabAgingTimeAging time in seconds Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.1.2.40.1.5 |
cambiumSTABridgeTableThis table contains information relevant to the particular SM bridge interfaces list: Bridge Name, Device MAC Address, Device Port, Aging Time in seconds Device Allocation: SM SEQUENCE OF CambiumSTABridgeEntry .1.3.6.1.4.1.17713.21.1.2.50 |
cambiumSTABridgeEntryInterface list for particular bridge. Device Allocation: SM CambiumSTABridgeEntry .1.3.6.1.4.1.17713.21.1.2.50.1 |
camSTABrTabBridgeNameBridge Name Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.50.1.1 |
camSTABrTabDevMACAddressDevice MAC Address Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.50.1.2 |
camSTABrTabDevPortDevice Port Device Allocation: SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.2.50.1.3 |
camSTABrTabAgingTimeAging time in seconds Device Allocation: SMro Counter32 .1.3.6.1.4.1.17713.21.1.2.50.1.4 |
cambiumSTAMACString with dropped SM's MAC address Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.1.2.60 |
cambiumSTADropReasonString with SM's drop reason Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.1.2.61 |
cambiumNetworkEntryFailureSTAMACString with rejected SM's MAC Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.1.2.62 |
cambiumNetworkEntryFailureReasonString with SM's reject reason Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.1.2.63 |
cambiumGPSStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.3 |
cambiumGPSCurrentSyncStateGPS Current SYNC State: 0 - The Initialization State 1 - The No Synchronization State 2 - The Synchronization State 3 - The Hold Off State 4 - The Regaining Sync State 5 - The Free Run State Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.3.1 |
cambiumGPSLatitudeCurrent location information from GPS Device. GPS cordinates (latitude). Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.3.2 |
cambiumGPSLongitudeCurrent location information from GPS Device. GPS cordinates (longitude). Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.3.3 |
cambiumGPSHeightCurrent location information from GPS Device. GPS coordinates (Height). Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.3.4 |
cambiumGPSTimeCurrent Time/Date information from GPS Device. GPS (Time). Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.3.5 |
cambiumGPSNumTrackedSatCurrent Satellite information from GPS Device. GPS (Number of Satellites Tracked). Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.1.3.6 |
cambiumGPSNumVisibleSatCurrent Satellite information from GPS Device. GPS (Number of Satellites Visible). Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.1.3.7 |
cambiumGPSSatSNRTableTable of Current Satellite information from GPS Device. GPS (SNR of Satellites). Device Allocation: AP, SM SEQUENCE OF CambiumGPSSatSNREntry .1.3.6.1.4.1.17713.21.1.3.8 |
cambiumGPSSatSNREntrySatellite SNR values for Visible and Tracked Satellites Device Allocation: AP CambiumGPSSatSNREntry .1.3.6.1.4.1.17713.21.1.3.8.1 |
gpsSatelliteIdSatellite ID for which SNR is displayedro Integer32 .1.3.6.1.4.1.17713.21.1.3.8.1.1 |
gpsSnrValueSNR value for a satellitero Integer32 .1.3.6.1.4.1.17713.21.1.3.8.1.2 |
gpsSatelliteStatusSatellite Status whether they are visible or tracked 1 - Visible 2 - Trackedro Integer32 (1|2) .1.3.6.1.4.1.17713.21.1.3.8.1.3 |
cambiumGPSDeviceInfoGPS Device Information Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.3.9 |
cambiumGPSFirmwareUpdateStatusSoftware Update Status OID 0 - No GPS FW Update is progress or No FW update is required, 1 - GPS FW Update is in progress, Uploading SW package to device, 2 - GPS FW Update is in progress, Verifying SHA2 signature, 3 - GPS FW Update is in progress, Executing pre-update script, 4 - GPS FW Update is in progress, Uploading Firmware to GPS device, 5 - GPS FW Update is in progress, Uploading Firmware to GPS device, 6 - GPS FW Update is in progress, Executing post-update script, 7 - GPS FW Update is finished, waiting for reboot, 8 - GPS FW Update is Required, Please upgrade to latest GPS FW, When GPS FW Update is successfully, return value is 7, GUI or NMS indicate that GPS FW update was successful, Device can be rebooted. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.1.3.10 |
cambiumLinkStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.4 |
cambiumLANStatusUse the RFC-1213 ifTable to view the physical port status. This attribute indicates the Linux driver status of the port. LAN Status: 0 - Down, 1 - Up, 2 - Disabled Device Allocation: AP, SMro Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.1.4.1 |
cambiumWLANStatusWLAN Status: 0 - Down, 1 - Up Device Allocation: AP, SMro Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.1.4.2 |
cambiumEffectiveDeviceIPAddressCurrent Device IP address Device Allocation: AP, SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.3 |
cambiumEffectiveSTANetworkModeEffective SM Network Mode: 1 - NAT, 2 - Bridge, 3 - Router Device Allocation: SMro Integer32 (1|2|3) .1.3.6.1.4.1.17713.21.1.4.4 |
cambiumEffectiveDeviceLANNetMaskCurrent Device Network Mask Device Allocation: AP, SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.5 |
cambiumEffectiveDeviceDefaultGateWayEffective Device Default Gateway IP Address, NOTE: This parameters lists only the first gateway IP Device Allocation: AP, SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.6 |
cambiumEffectiveDeviceDNSIPAddressCurrent Device DNS IP Address, NOTE: This parameter displays only the first DNS IP Device Allocation: AP, SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.7 |
cambiumEffectiveWANIPAddressCurrent Device WLAN IP address Device Allocation: SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.8 |
cambiumEffectiveDeviceWANNetMaskCurrent Device Network Mask Device Allocation: SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.9 |
cambiumEffectiveDeviceWANPPPoEStatusWAN PPPoE Status: 0 - Disabled 1 - Enabled-Connected 2 - Enabled-Connecting 3 - Enabled-Disconnected Device Allocation: SMro Integer32 (0|1) .1.3.6.1.4.1.17713.21.1.4.10 |
cambiumLANModeStatusLAN Mode Status -1 - No data, 0 - Half, 1 - Full Device Allocation: AP, SMro Integer32 (-1|0|1) .1.3.6.1.4.1.17713.21.1.4.11 |
cambiumLANSpeedStatusLAN Speed Status -1 - No data, 10 - 10 Mb/s, 100 - 100 Mb/s, 1000 - 1000 Mb/s Device Allocation: AP, SMro Integer32 (-1|10|100|1000) .1.3.6.1.4.1.17713.21.1.4.12 |
cambiumDHCPOption82StatusDHCP Option82 Status: 0 - Disabled 1 - Enabled Device Allocation: APro Integer32 (0|1) .1.3.6.1.4.1.17713.21.1.4.13 |
cambiumLAN2ModeStatus2nd LAN Mode Status -1 - No data, 0 - Half, 1 - Full Device Allocation: AP, SMro Integer32 (-1|0|1) .1.3.6.1.4.1.17713.21.1.4.14 |
cambiumLAN2SpeedStatus2nd LAN Speed Status -1 - No data, 10 - 10 Mb/s, 100 - 100 Mb/s, 1000 - 1000 Mb/s Device Allocation: AP, SMro Integer32 (-1|10|100|1000) .1.3.6.1.4.1.17713.21.1.4.15 |
cambiumLAN2StatusUse the RFC-1213 ifTable to view the physical port status. This attribute indicates the Linux driver status of the port. 2nd LAN Status: 0 - Down, 1 - Up, 2 - Disabled Device Allocation: AP, SMro Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.1.4.16 |
cambiumARPTableNeibour devices IP/MAC pair Table SEQUENCE OF CambiumARPEntry .1.3.6.1.4.1.17713.21.1.4.20 |
cambiumARPEntryNeighbour device IP/MAC pair entry CambiumARPEntry .1.3.6.1.4.1.17713.21.1.4.20.1 |
cambiumARPIndexIndexro Integer32 .1.3.6.1.4.1.17713.21.1.4.20.1.1 |
cambiumARPMACNeighbour device MAC Addressro DisplayString .1.3.6.1.4.1.17713.21.1.4.20.1.2 |
cambiumARPIPNeighbour device IP Addressro IpAddress .1.3.6.1.4.1.17713.21.1.4.20.1.3 |
cambiumARPInterfaceNeighbour device Interfacero DisplayString .1.3.6.1.4.1.17713.21.1.4.20.1.4 |
cambiumManagementIFStatusSeparate Management Interface Status: 0 - Down, 1 - Up Device Allocation: SMro Integer32 (0|1) .1.3.6.1.4.1.17713.21.1.4.25 |
cambiumManagementIFIPAddressCurrent Device Separate Management IP address Device Allocation: SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.26 |
cambiumManagementIFNetMaskCurrent Device Separate Management Network Mask Device Allocation: SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.27 |
cambiumManagementIFGatewayCurrent Device Separate Management Gateway Device Allocation: SMro IpAddress .1.3.6.1.4.1.17713.21.1.4.28 |
cambiumEffectiveNetworkLanMTUSM NAT LAN MTU size Device Allocation: SMro Integer32 (0|576..1700) .1.3.6.1.4.1.17713.21.1.4.29 |
cambiumEffectiveNetworkBridgeMTUDevice Bridge MTU size Device Allocation: AP, SMro Integer32 (0|576..1700) .1.3.6.1.4.1.17713.21.1.4.30 |
cambiumStaticRoutesTableStatic Routes Table SEQUENCE OF CambiumStaticRoutesEntry .1.3.6.1.4.1.17713.21.1.4.31 |
cambiumStaticRoutesEntryStatic Routes Dest/Getway pair entry CambiumStaticRoutesEntry .1.3.6.1.4.1.17713.21.1.4.31.1 |
cambiumStaticRoutesIndexIndexro Integer32 .1.3.6.1.4.1.17713.21.1.4.31.1.1 |
cambiumStaticRoutesDestIPDestination IPro IpAddress .1.3.6.1.4.1.17713.21.1.4.31.1.2 |
cambiumStaticRoutesGWGetway IPro IpAddress .1.3.6.1.4.1.17713.21.1.4.31.1.3 |
cambiumStaticRoutesNetmaskDest IP Netmaskro IpAddress .1.3.6.1.4.1.17713.21.1.4.31.1.4 |
cambiumStaticRoutesInterfaceStatic Routes Interface Namero DisplayString .1.3.6.1.4.1.17713.21.1.4.31.1.5 |
cambiumIPAliasTableIP aliases list table. Device Allocation: AP, SM SEQUENCE OF CambiumIPAliasEntry .1.3.6.1.4.1.17713.21.1.4.32 |
cambiumIPAliasEntryIP aliases list table entry. Device Allocation: AP, SM. CambiumIPAliasEntry .1.3.6.1.4.1.17713.21.1.4.32.1 |
cambiumIPAliasTableIndexIP aliases table index.ro Integer32 .1.3.6.1.4.1.17713.21.1.4.32.1.1 |
cambiumIPAliasIPIP alias IP address.ro IpAddress .1.3.6.1.4.1.17713.21.1.4.32.1.2 |
cambiumIPAliasNetmaskIP alias netmask.ro IpAddress .1.3.6.1.4.1.17713.21.1.4.32.1.3 |
cambiumCnsServConsStatcnMaestro Connection Status: Cambium provides cloud management of Cambium devices, called cnMaestro. This describes the state of the connection to the cnMaestroro DisplayString .1.3.6.1.4.1.17713.21.1.4.33 |
cambiumCnsServAccountIDcnMaestro Account ID: Displays cnMaestro Account ID, This is the account ID for the customer. It is returned from the cloud management system.ro DisplayString .1.3.6.1.4.1.17713.21.1.4.34 |
cambiumAPCnsMGMTStateAP Device management Statero Integer32 .1.3.6.1.4.1.17713.21.1.4.35 |
cambiumAcsStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.5 |
acsStateIndicates the state of the Automatic Channel Selection (ACS) feature: 0 - Disabled, 1 - Enabled, 2 - Running, 3 - Aborting Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.5.1 |
cambiumMcastStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.6 |
cambiumEffectiveMcastGroupLimitDisaplays the Effective Multicast Group Limit number: 0 - 10 Groups Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.6.1 |
cambiumSubscribedMcastGroupNumDisaplays the number of subscribed Multicast Groups: 0 - 5 Groups Device Allocation: SMro Integer32 .1.3.6.1.4.1.17713.21.1.6.2 |
cambiumAPMcastTotalGroupCountDisaplays the count of subscribed Multicast Groups: 0 - 512 Groups Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.1.6.3 |
cambiumMcastHandlingStatusDisaplays the status of the Multicast features: 0 - Fixed MCS 3 - Multicast to Unicast Device Allocation: APro Integer32 (0|3) .1.3.6.1.4.1.17713.21.1.6.4 |
cambiumSubscribedMcastGroupTableThis table contains Registered Multicast Group information: Multicast Group IP Device Allocation: SM SEQUENCE OF CambiumSubscribedMcastGroupEntry .1.3.6.1.4.1.17713.21.1.6.10 |
cambiumSubscribedMcastGroupEntryMulticast group information for particular subscription Device Allocation: SM CambiumSubscribedMcastGroupEntry .1.3.6.1.4.1.17713.21.1.6.10.1 |
cambiumRegisteredMcastGroupIPRegistered Multicast Group IP Device Allocation: SMro IpAddress .1.3.6.1.4.1.17713.21.1.6.10.1.1 |
cambiumDhcpStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.7 |
dhcpServerStartIPDhcp server start address Device Allocation: STArw IpAddress .1.3.6.1.4.1.17713.21.1.7.1 |
dhcpServerEndIPDhcp server end address Device Allocation: STArw IpAddress .1.3.6.1.4.1.17713.21.1.7.2 |
dhcpServerGatewayIPDHCP Gateway IP Address Device Allocation: STArw IpAddress .1.3.6.1.4.1.17713.21.1.7.3 |
dhcpServerDNSIPDHCP server DNS IP Address Device Allocation: STArw IpAddress .1.3.6.1.4.1.17713.21.1.7.4 |
dhcpServerStaticHostTableTable for DHCP static MAC to IP SEQUENCE OF DhcpServerStaticHostEntry .1.3.6.1.4.1.17713.21.1.7.5 |
dhcpServerStaticHostEntryDHCP Hosts Table Entry Device Allocation: STA DhcpServerStaticHostEntry .1.3.6.1.4.1.17713.21.1.7.5.1 |
dhcpStaticIndexDHCP Static Table Indexro Integer32 .1.3.6.1.4.1.17713.21.1.7.5.1.1 |
dhcpStaticMACDHCP Static MACro DisplayString .1.3.6.1.4.1.17713.21.1.7.5.1.2 |
dhcpStaticIPDHCP Static IPro IpAddress .1.3.6.1.4.1.17713.21.1.7.5.1.3 |
dhcpServerLeaseTableDHCP Assigned IP Address Table SEQUENCE OF DhcpServerLeaseEntry .1.3.6.1.4.1.17713.21.1.7.6 |
dhcpServerLeaseEntryDHCP Assigned IP Address Entry Device Allocation: STA DhcpServerLeaseEntry .1.3.6.1.4.1.17713.21.1.7.6.1 |
dhcpLeaseIndexDHCP lease table indexro Integer32 .1.3.6.1.4.1.17713.21.1.7.6.1.1 |
dhcpLeaseMACDHCP Assigned MAC Addressro DisplayString .1.3.6.1.4.1.17713.21.1.7.6.1.2 |
dhcpLeaseIPDHCP Assigned IP Addressro IpAddress .1.3.6.1.4.1.17713.21.1.7.6.1.3 |
dhcpLeaseDevNameDHCP Assigned Device Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.1.7.6.1.4 |
cambiumLicenseInfo OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.8 |
cambLicenseVersionDevice Operational Lincense Version Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.8.1 |
cambLicenseSMcntUnlockFull Capacity AP feature unlock, based on information from Operational Lincense Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.8.2 |
cambLicenseMACaddrDevice Operational Lincense MAC address Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.8.3 |
cambLicenseCountryCountry Code for ETSI locked device, based on information from Operational Lincense Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.1.8.4 |
cambLicenseStatusDevice Operational Lincense Status: 0 - Unknown 1 - License Valid 2 - Validation procedure was not provided 3 - Validation Fail 4 - License not valid for current device Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.1.8.5 |
cambiumRadiusVSAStatus OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.1.9 |
networkRadiusVSAmgmtVLANVIDVSA Management VLAN IDro Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.1.9.1 |
networkRadiusVSAmgmtVLANVPVSA Management VLAN VPro Integer32 (0|1..7) .1.3.6.1.4.1.17713.21.1.9.2 |
networkRadiusVSAdataVLANVIDVSA Data VLAN IDro Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.1.9.3 |
networkRadiusVSAdataVLANVPVSA Data VLAN VPro Integer32 (0|1..7) .1.3.6.1.4.1.17713.21.1.9.4 |
networkRadiusVSAmgmtIFVIDVSA Separate Management Interface VLAN IDro Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.1.9.5 |
networkRadiusVSAmgmtIFVPVSA Separate Management Interface VLAN VPro Integer32 (0|1..7) .1.3.6.1.4.1.17713.21.1.9.6 |
networkRadiusVSAmcastVLANVIDVSA Multicast VLAN IDro Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.1.9.7 |
networkRadiusVSAmembershipVLANTableVSA Membership VLAN Table SEQUENCE OF NetworkRadiusVSAmembershipVLANEntry .1.3.6.1.4.1.17713.21.1.9.10 |
networkRadiusVSAmembershipVLANEntryVSA Membership VLAN Table Rule Entry NetworkRadiusVSAmembershipVLANEntry .1.3.6.1.4.1.17713.21.1.9.10.1 |
networkRadiusVSAmembershipVLANIndexVSA Membership VLAN Table Entry Indexro Integer32 .1.3.6.1.4.1.17713.21.1.9.10.1.1 |
networkRadiusVSAmembershipVLANVIDBeginVSA Membership VLAN Table Entry VLAN ID Beginro Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.1.9.10.1.2 |
networkRadiusVSAmembershipVLANVIDEndVSA Membership VLAN Table Entry VLAN ID Endro Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.1.9.10.1.3 |
networkRadiusVSAmappingVLANTableVSA Mapping VLAN Table Rule Entry SEQUENCE OF NetworkRadiusVSAmappingVLANEntry .1.3.6.1.4.1.17713.21.1.9.20 |
networkRadiusVSAmappingVLANEntryVSA Mapping VLAN Table Rule Entry NetworkRadiusVSAmappingVLANEntry .1.3.6.1.4.1.17713.21.1.9.20.1 |
networkRadiusVSAmappingVLANIndexVSA Mapping VLAN Table Entry Indexro Integer32 .1.3.6.1.4.1.17713.21.1.9.20.1.1 |
networkRadiusVSAmappingVLANCVLANVSA Mapping VLAN Table C-VLAN IDro Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.1.9.20.1.2 |
networkRadiusVSAmappingVLANSVLANVSA Mapping VLAN Table S-VLAN IDro Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.1.9.20.1.3 |
cambiumPmp80211SystemMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.2 |
cambiumPerformanceMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.2.1 |
cambiumStatsForceUpdateCambium Statistics Update/Reset Action Statistic is updated automatically in the background each 15sec SNMP-GET on This OID forces update of subsequent Statistics tree SNMP-SET on This OID Resets all of the subsequent Statistic Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.2.1.1 |
cambiumEthRXBytesTotal Ethernet RX bytes Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.2 |
cambiumEthRXPacketsTotal Ethernet RX packets Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.3 |
cambiumEthRXErrorsTotal Ethernet RX errors Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.4 |
cambiumEthRXDropsTotal Ethernet RX drops Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.5 |
cambiumEthRXMulticastTotal Ethernet RX multicast Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.6 |
cambiumEthRXBroadcastTotal Ethernet RX broadcast Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.7 |
cambiumEthTXBytesTotal Ethernet TX bytes Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.8 |
cambiumEthTXPacketsTotal Ethernet TX packets Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.9 |
cambiumEthTXErrorsTotal Ethernet TX errors Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.10 |
cambiumEthTXDropsTotal Ethernet TX drops Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.11 |
cambiumEthTXMulticastTotal Ethernet TX multicast Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.12 |
cambiumEthTXBroadcastTotal Ethernet TX broadcast Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.13 |
cambiumAthRXBytesTotal Wireless RX bytes Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.21 |
cambiumAthRXPacketsTotal Wireless RX packets Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.22 |
cambiumAthRXErrorsTotal Wireless RX errors Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.23 |
cambiumAthRXDropsTotal Wireless RX drops Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.24 |
cambiumAthRXMulticastTotal Wireless RX multicast Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.25 |
cambiumAthRXBroadcastTotal Wireless RX broadcast Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.26 |
cambiumAthTXBytesTotal Wireless TX bytes Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.27 |
cambiumAthTXPacketsTotal Wireless TX packets Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.28 |
cambiumAthTXErrorsTotal Wireless TX errors Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.29 |
cambiumAthTXDropsTotal Wireless TX drops Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.30 |
cambiumAthTXMulticastTotal Wireless TX multicast Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.31 |
cambiumAthTXBroadcastTotal Wireless TX broadcast Device Allocation: AP, SMroobsolete Counter64 .1.3.6.1.4.1.17713.21.2.1.32 |
sysNetworkEntryAttemptNumber of attempt to enter the AP network Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.33 |
sysNetworkEntrySuccessNumber of successful network entry into the AP Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.34 |
sysNetworkEntryAuthenticationFailureNumber of failed network entry into the AP due to authentication failure Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.35 |
sysDFSDetectedCountNumber of DFS detected during channel initialization or during service which causes channel remap Device Allocation: AP, SMro Counter32 .1.3.6.1.4.1.17713.21.2.1.36 |
ulWLanKbitCountAggregated total Uplink data traffic in kilobits Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.37 |
dlWLanKbitCountAggregated total Downlink data traffic in kilobits Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.38 |
ulWLanTotalPacketCountAggregated number of total Uplink data packet transmitted by SM or received by AP Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.39 |
sysRebootCountDevice Reboot Counter Device Allocation: AP, SMroobsolete Integer32 .1.3.6.1.4.1.17713.21.2.1.41 |
dlWLanTotalPacketCountAggregated number of total Downlink data packet transmitted by AP or received by SM Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.42 |
ulWLanMultiBroadcastKbitCountAggregated total Uplink multicast and broadcast data traffic in kilobits Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.43 |
dlWLanMultiBroadcastKbitCountAggregated total Downlink multicast and broadcast data traffic in kilobits Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.44 |
wLanSessionDroppedCountAggregated number of SM session dropped due to no responses of bandwidth request response Device Allocation: AP, SMro Counter32 .1.3.6.1.4.1.17713.21.2.1.45 |
cambiumTDDStatsPerSTATableThis table contains information relevant to customer TDD Statistics for connected SMs: - station MAC Address, - uplink data traffic in Kbits for a single SM; - downlink data traffic in Kbits for a single SM; - number of uplink total data packet received at AP for a single SM; - number of downlink total data packet transmitted at AP for a single SM; - number of uplink data packet dropped due to data integrity error or other RF related packer errors for a single SM; - number of downlink data packet dropped due to no-acknowledgement or other RF related packet error for a single SM; - number of downlink data packet dropped due to data buffer/queue overflow or other system internal buffer/sending related packet error for a single SM; - number of downlink data packet retransmitted due to no-acknowledge for a single SM. Device Allocation: AP SEQUENCE OF CambiumTDDStatsPerSTAEntry .1.3.6.1.4.1.17713.21.2.1.46 |
cambiumTDDStatsPerSTAEntryCustomer TDD Statistics for particular SM Device Allocation: AP CambiumTDDStatsPerSTAEntry .1.3.6.1.4.1.17713.21.2.1.46.1 |
cambiumTDDStatsPerSTAIndexTable indexro Integer32 .1.3.6.1.4.1.17713.21.2.1.46.1.1 |
cambiumTDDStatsListMACConnected SM WLAN MAC Address Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.2.1.46.1.2 |
ulWLanPerUserKbitCountUplink data traffic in Kbits for a single SM Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.46.1.3 |
dlWLanPerUserKbitCountDownlink data traffic in Kbits for a single SM Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.46.1.4 |
ulWLanPerUserTotalPacketCountNumber of uplink total data packet received at AP for a single SM Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.46.1.5 |
dlWLanPerUserTotalPacketCountNumber of downlink total data packet transmitted at AP for a single SM Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.46.1.6 |
ulWLanPerUserErrorDroppedPacketCountNumber of uplink data packet dropped due to data integrity error or other RF related packer errors for a single SM Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.46.1.7 |
dlWLanPerUserErrorDroppedPacketCountNumber of downlink data packet dropped due to no-acknowledgement or other RF related packet error for a single SM Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.46.1.8 |
dlWLanPerUserCapacityDroppedPacketCountNumber of downlink data packet dropped due to data buffer/queue overflow or other system internal buffer/sending related packet error for a single SM Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.46.1.9 |
dlWLanPerUserRetransmitPacketCountNumber of downlink data packet retransmitted due to no-acknowledge for a single SM Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.46.1.10 |
dlWLanPerUserTxPowerDownlink TxPower of data packages for a single SM Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.2.1.46.1.11 |
ulWLanErrorDroppedPacketCountAggregated number of total Uplink data packet dropped due to data integrity error or other data packet association or RF error in packet Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.47 |
dlWLanErrorDroppedPacketCountAggregated number of total Downlink data packet dropped due to data integrity error or other data packet association error in packet Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.48 |
ulWLanCapacityDroppedPacketCountAggregated number of total Uplink data packet dropped due to WLAN capacity issue in packets Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.49 |
dlWLanCapacityDroppedPacketCountAggregated number of total Downlink data packet dropped due to exceed data buffer, over capacity or internal packet package sent issues in packet Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.50 |
ulWLanTotalAvailableFrameTimePerSecondAggregated number of total uplink available frame time can be scheduled for traffic in micro second for 1 second period Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.51 |
dlWLanTotalAvailableFrameTimePerSecondAggregated number of total downlink available frame time can be scheduled for traffic in micro second for 1 second period Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.52 |
ulWLanTotalUsedFrameTimePerSecondAggregated number of uplink frame time schedule to be used in microsecond for 1 second period Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.53 |
dlWLanTotalUsedFrameTimePerSecondAggregated number of downlink frame time scheduled to be used per frame for 1 second period Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.54 |
ulWLanTotalOverheadFrameTimePerSecondAggregated number of uplink frame time is used for overhead (preamble and inter-frame gap) in microsecond for 1 second period Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.55 |
dlWLanTotalOverheadFrameTimePerSecondAggregated number of downlink frame time is used for overhead (preamble ans inter-frame gap) per frame for 1 second period Device Allocation: APro Counter32 .1.3.6.1.4.1.17713.21.2.1.56 |
cambiumMCSTableThis table contains information relevant to customer TDD Statistics for MCS RX and TX rates: - MCS number (MCSxx); - Aggregated number of uplink frame time used for MCSxx in microsecond for 1 second period; - Aggregated number of downlink frame time used for MCSxx in microsecond for 1 second period. Device Allocation: APobsolete SEQUENCE OF CambiumMCSEntry .1.3.6.1.4.1.17713.21.2.1.57 |
cambiumMCSEntryMCS table Device Allocation: APobsolete CambiumMCSEntry .1.3.6.1.4.1.17713.21.2.1.57.1 |
cambiumMCSIndexMCS index Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.2.1.57.1.1 |
cambiumMCSNumberMCS number (MCSxx) Device Allocation: AProobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.2.1.57.1.2 |
ulWLanMCSUsedFrameTimePerSecondAggregated number of uplink frame time used for MCSxx in microsecond for 1 second period Device Allocation: AProobsolete Counter32 .1.3.6.1.4.1.17713.21.2.1.57.1.3 |
dlWLanMCSUsedFrameTimePerSecondAggregated number of downlink frame time used for MCSxx in microsecond for 1 second period Device Allocation: AProobsolete Counter32 .1.3.6.1.4.1.17713.21.2.1.57.1.4 |
ulWLanRetransPacketCountAggregated number of total Uplink data packet retransmitted due to no-acknowledgement. Device Allocation: SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.58 |
dlWLanRetransPacketCountAggregated number of total Downlink data packet retransmitted due to no-acknowledgement Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.59 |
ulWLanBroadcastPacketCountAggregated total Uplink broadcast packet counter Device Allocation: AP, SMro Counter32 .1.3.6.1.4.1.17713.21.2.1.60 |
dlWLanBroadcastPacketCountAggregated total Downlink broadcast packet counter Device Allocation: AP, SMro Counter32 .1.3.6.1.4.1.17713.21.2.1.61 |
ulWLanMulticastPacketCountAggregated total Uplink multicast packet counter Device Allocation: AP, SMro Counter32 .1.3.6.1.4.1.17713.21.2.1.62 |
dlWLanMulticastPacketCountAggregated total Downlink multicast packet counter Device Allocation: AP, SMro Counter32 .1.3.6.1.4.1.17713.21.2.1.63 |
sysCPUUsageCPU Usage, measuring up to 0.1% Range: 0..1000 Device Allocation: AP, SMro Counter32 .1.3.6.1.4.1.17713.21.2.1.64 |
rxEtherLanKbitCountTotal Ethernet RX bytes Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.65 |
rxEtherLanTotalPacketCountTotal Ethernet RX packets Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.66 |
rxEtherLanErrorPacketCountTotal Ethernet RX errors Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.67 |
rxEtherLanDroppedPacketCountTotal Ethernet RX drops Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.68 |
rxEtherLanMulticastPacketCountTotal Ethernet RX multicast Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.69 |
rxEtherLanBroadcastPacketCountTotal Ethernet RX broadcast Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.70 |
rxEtherLanMultiBroadcastKbitCountAggregated total Ethernet RX multicast and broadcast data traffic Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.71 |
txEtherLanKbitCountTotal Ethernet TX bytes Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.72 |
txEtherLanTotalPacketCountTotal Ethernet TX packets Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.73 |
txEtherLanErrorPacketCountTotal Ethernet TX errors Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.74 |
txEtherLanDroppedPacketCountTotal Ethernet TX drops Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.75 |
txEtherLanMulticastPacketCountTotal Ethernet TX multicast Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.76 |
txEtherLanBroadcastPacketCountTotal Ethernet TX broadcast Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.77 |
txEtherLanMultiBroadcastKbitCountAggregated total Ethernet TX multicast and broadcast data traffic Device Allocation: AP, SMro Counter64 .1.3.6.1.4.1.17713.21.2.1.78 |
cambiumStatsResetTimerStatus time to indicate when is the last time stats are reset Device Allocation: AP, SMro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.17713.21.2.1.79 |
ulWLanMCS00PacketsAggregated number of uplink packet received for MCS00 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.80 |
ulWLanMCS01PacketsAggregated number of uplink packet received for MCS01 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.81 |
ulWLanMCS02PacketsAggregated number of uplink packet received for MCS02 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.82 |
ulWLanMCS03PacketsAggregated number of uplink packet received for MCS03 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.83 |
ulWLanMCS04PacketsAggregated number of uplink packet received for MCS04 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.84 |
ulWLanMCS05PacketsAggregated number of uplink packet received for MCS05 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.85 |
ulWLanMCS06PacketsAggregated number of uplink packet received for MCS06 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.86 |
ulWLanMCS07PacketsAggregated number of uplink packet received for MCS07 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.87 |
ulWLanMCS08PacketsAggregated number of uplink packet received for MCS08 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.88 |
ulWLanMCS09PacketsAggregated number of uplink packet received for MCS09 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.89 |
ulWLanMCS10PacketsAggregated number of uplink packet received for MCS10 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.90 |
ulWLanMCS11PacketsAggregated number of uplink packet received for MCS11 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.91 |
ulWLanMCS12PacketsAggregated number of uplink packet received for MCS12 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.92 |
ulWLanMCS13PacketsAggregated number of uplink packet received for MCS13 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.93 |
ulWLanMCS14PacketsAggregated number of uplink packet received for MCS14 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.94 |
ulWLanMCS15PacketsAggregated number of uplink packet received for MCS15 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.95 |
dlWLanMCS00PacketsAggregated number of downlink packet received for MCS00 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.96 |
dlWLanMCS01PacketsAggregated number of downlink packet received for MCS01 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.97 |
dlWLanMCS02PacketsAggregated number of downlink packet received for MCS02 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.98 |
dlWLanMCS03PacketsAggregated number of downlink packet received for MCS03 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.99 |
dlWLanMCS04PacketsAggregated number of downlink packet received for MCS04 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.100 |
dlWLanMCS05PacketsAggregated number of downlink packet received for MCS05 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.101 |
dlWLanMCS06PacketsAggregated number of downlink packet received for MCS06 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.102 |
dlWLanMCS07PacketsAggregated number of downlink packet received for MCS07 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.103 |
dlWLanMCS08PacketsAggregated number of downlink packet received for MCS08 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.104 |
dlWLanMCS09PacketsAggregated number of downlink packet received for MCS09 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.105 |
dlWLanMCS10PacketsAggregated number of downlink packet received for MCS10 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.106 |
dlWLanMCS11PacketsAggregated number of downlink packet received for MCS11 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.107 |
dlWLanMCS12PacketsAggregated number of downlink packet received for MCS12 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.108 |
dlWLanMCS13PacketsAggregated number of downlink packet received for MCS13 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.109 |
dlWLanMCS14PacketsAggregated number of downlink packet received for MCS14 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.110 |
dlWLanMCS15PacketsAggregated number of downlink packet received for MCS15 Device Allocation: APro Counter64 .1.3.6.1.4.1.17713.21.2.1.111 |
cambiumRealTimeStatsMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.2.2 |
cambiumAdvancedPerformanceMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.2.3 |
cambiumpmp80211SystemConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3 |
cambiumSystemLog OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.1 |
syslogServerIPFirstSyslog Server IP Address 1 Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.1.1 |
syslogServerIPSecondSyslog Server IP Address 2 Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.1.2 |
syslogServerIPThirdSyslog Server IP Address 3 Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.1.3 |
syslogServerIPFourthSyslog Server IP Address 4 Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.1.4 |
syslogServerLogToWebEnable Log to WEB Interface: 0 - Disable, 1 - Enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.1.5 |
syslogServerLogMaskLog Level Mask: 0x00 - all messages, 0x01 - emerg, 0x02 - alert, 0x04 - crit, 0x08 - err, 0x10 - warning, 0x20 - notice, 0x40 - info, 0x80 - debug Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.1.6 |
cambiumDHCP OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.2 |
dhcpLanEnableLocal DHCP Server Enable: 0 - Disable 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.2.1 |
dhcpLanStartLocal DHCP Server IP Start Address Offset from the Network address. Device Allocation: SMrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.17713.21.3.2.2 |
dhcpLanLimitLocal DHCP Server IP End Address Offset from the Network address. Device Allocation: SMrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.17713.21.3.2.3 |
dhcpLanLeasetimeLocal DHCP Lease Setup in hours Valid Range: 1 hour - 24 hours Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.2.4 |
dhcpLanHostTableTable for DHCP Hosts Device Allocation: SM SEQUENCE OF DhcpLanHostEntry .1.3.6.1.4.1.17713.21.3.2.5 |
dhcpLanHostEntryDHCP Hosts Table Entry Device Allocation: SM DhcpLanHostEntry .1.3.6.1.4.1.17713.21.3.2.5.1 |
dhcpLanHostIndexDHCP host Table Index Table Entry is cleared if Index is set to zero Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.2.5.1.1 |
dhcpLanHostIPDHCP Lan Host IP 'ignore' or the IP address to be used for DHCP host Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.2.5.1.2 |
dhcpLanHostMACThe hardware address of this host Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.2.5.1.3 |
dhcpLanHostNameOptional hostname to assign Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.2.5.1.4 |
dhcpOption82DHCP Option82: 0 - Disable 1 - Enable Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.2.6 |
cambiumSSHServer OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.3 |
cambiumSSHServerEnableCambium SSH Server: 0 - Disable, 1 - Enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.3.1 |
network OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4 |
networkModeSM Network Mode: 1 - NAT, 2 - Bridge, 3 - Router Device Allocation: SMrw Integer32 (1|2|3) .1.3.6.1.4.1.17713.21.3.4.1 |
networkLan OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4.2 |
networkLanIPAddressModeSM NAT LAN IP Address Mode 1 - Static, 2 - DHCP Device Allocation: AP, SMrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.4.2.1 |
networkLanIPAddrSM NAT LAN IP Address Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.2.2 |
networkLanNetmaskSM NAT LAN IP Subnet Mask Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.2.3 |
networkLanGatewayIPSM NAT LAN Gateway IP Address Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.2.4 |
networkLanDNSIPAddrSM NAT LAN DNS Server IP Address Device Allocation: SMrwobsolete IpAddress .1.3.6.1.4.1.17713.21.3.4.2.5 |
networkLanMTUSM NAT LAN MTU size Device Allocation: SMrw Integer32 (0|576..1700) .1.3.6.1.4.1.17713.21.3.4.2.6 |
networkLanDNSIPAddrPrimarySM NAT LAN DNS Server IP Address Device Allocation: SM Primary Server IPrw IpAddress .1.3.6.1.4.1.17713.21.3.4.2.7 |
networkLanDNSIPAddrSecondarySM NAT LAN DNS Server IP Address Device Allocation: SM Secondary Server IPrw IpAddress .1.3.6.1.4.1.17713.21.3.4.2.8 |
networkLanAutoNegotiationLan Autonegotiation 0 - Disable, 1 - Enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.2.9 |
networkLanSpeedLAN Speed 10 - 10 Mb/s, 100 - 100 Mb/s, 1000 - 1000 Mb/s Device Allocation: AP, SMrw Integer32 (10|100|1000) .1.3.6.1.4.1.17713.21.3.4.2.10 |
networkLanDuplexLAN Duplex Mode 0 - Half, 1 - Full Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.2.11 |
networkBroadcastStormEnabledBroadcast Strom Control 0 - Disabled, 1 - Enabled Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.2.12 |
networkBroadcastStormRateBroadcast Strom Control Rate in frames per second Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.2.13 |
networkLan2EnabledAUX Lan Port Enabled 0 - Disable, 1 - Enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.2.20 |
networkLan2AutoNegotiationLan Autonegotiation 0 - Disable, 1 - Enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.2.21 |
networkLan2SpeedLAN Speed 10 - 10 Mb/s, 100 - 100 Mb/s Device Allocation: AP, SMrw Integer32 (10|100) .1.3.6.1.4.1.17713.21.3.4.2.22 |
networkLan2DuplexLAN Duplex Mode 0 - Half, 1 - Full Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.2.23 |
networkLan2PoEEnabledPoE Enabled 0 - Disabled, 1 - Enabled Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.2.24 |
networkLanEnabledLan Port Enabled 0 - Disable, 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.2.25 |
networkWan OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4.3 |
networkWanIPAddressModeSM NAT WAN IP Address Mode 1 - Static, 2 - DHCP Device Allocation: SMrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.4.3.1 |
networkWanIPAddrSM NAT WAN IP Address Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.3.2 |
networkWanNetmaskSM NAT WAN IP Subnet Mask Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.3.3 |
networkWanGatewayIPSM NAT WAN Gateway IP Address Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.3.4 |
networkWanDNSIPAddrSM NAT WAN DNS Server IP Address Device Allocation: SMrwobsolete IpAddress .1.3.6.1.4.1.17713.21.3.4.3.5 |
networkWanMTUSM NAT WAN MTU size Device Allocation: SMrw Integer32 (0|576..1700) .1.3.6.1.4.1.17713.21.3.4.3.6 |
networkWanDNSIPAddrPrimarySM NAT WAN DNS Server IP Address Device Allocation: SM Primary Server IPrw IpAddress .1.3.6.1.4.1.17713.21.3.4.3.7 |
networkWanDNSIPAddrSecondarySM NAT WAN DNS Server IP Address Device Allocation: SM Secondary Server IPrw IpAddress .1.3.6.1.4.1.17713.21.3.4.3.8 |
networkWanPPPoESM only.Enable or Disable PPPoE mode. 1 is enable 0 is disablerw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.3.9 |
networkWanPPPoEUsernameSM only.Username to authenticate with PPPoE Serverrw DisplayString .1.3.6.1.4.1.17713.21.3.4.3.10 |
networkWanPPPoEPasswordSM only.Password to authenticate with PPPoE Serverrw DisplayString .1.3.6.1.4.1.17713.21.3.4.3.11 |
networkWanPPPoEACSM only.PPPoE Access Concentrator Namerw DisplayString .1.3.6.1.4.1.17713.21.3.4.3.12 |
networkWanPPPoEServiceSM only.PPPoE Service Namerw DisplayString .1.3.6.1.4.1.17713.21.3.4.3.13 |
networkWanPPPoEAuthSM only.This indicates type of authentication with PPPoE Server. Options are 0 - All 1 - PAP 2 - CHAPrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.4.3.14 |
networkWanPPPoEMTUSM only.MTU size to be used for PPPoE connectionrw Integer32 (0|576..1492) .1.3.6.1.4.1.17713.21.3.4.3.15 |
networkWanPPPoEKeepAliveSM only.Time in seconds for the keep Alive messages from PPPoE client to PPPoE Serverrw Integer32 (0|5..180) .1.3.6.1.4.1.17713.21.3.4.3.16 |
networkWanPPPoEMSSClampingSM only.Enable or disable MSS Clamping 0 - Disable 1 - Enablerw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.3.17 |
mgmtVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4.4 |
mgmtVLANEnableManagement VLANs State: 0 - Disable, 1 - Enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.4.1 |
mgmtVLANVIDManagement VLAN ID Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.4.2 |
mgmtVLANVPManagement VLAN VP Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.4.3 |
dataVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4.5 |
dataVLANEnableData VLANs State: 0 - Disable, 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.5.1 |
dataVLANVIDData VLAN ID Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.5.2 |
dataVLANVPData VLAN VP Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.5.3 |
networkSTPSpanning Tree Protocol: 0 - Disable STP (Default mode) 1 - Enable STP Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.6 |
networkBridge OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4.7 |
networkBridgeIPAddressModeDevice Bridge IP Address Mode 1 - Static, 2 - DHCP Device Allocation: AP, SMrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.4.7.1 |
networkBridgeIPAddrDevice Bridge IP Address Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.7.2 |
networkBridgeNetmaskDevice Bridge IP Subnet Mask Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.7.3 |
networkBridgeGatewayIPDevice Bridge Gateway IP Address Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.7.4 |
networkBridgeDNSIPAddrDevice Bridge DNS Server IP Address Device Allocation: AP, SMrwobsolete IpAddress .1.3.6.1.4.1.17713.21.3.4.7.5 |
networkBridgeMTUDevice Bridge MTU size Device Allocation: AP, SMrw Integer32 (0|576..1700) .1.3.6.1.4.1.17713.21.3.4.7.6 |
networkBridgeDNSIPAddrPrimaryDevice Bridge DNS Server IP Address Device Allocation: AP, SM Primary Server IPrw IpAddress .1.3.6.1.4.1.17713.21.3.4.7.7 |
networkBridgeDNSIPAddrSecondaryDevice Bridge DNS Server IP Address Device Allocation: AP, SM Secondary Server IPrw IpAddress .1.3.6.1.4.1.17713.21.3.4.7.8 |
networkPortSecurityLAN Port Security switch: 0 - Disable 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.8 |
networkPortSecurityMaxNumber of secure MAC addresses: 1-254 - Fixed Learned MAC limit Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.9 |
networkPortSecurityAgingTimeSecurity MAC address aging time: This prameter indicates on how long to store learned MAC address in the cache in seconds, 0 - do not delete MAC address from the buffer, Default - is 300 seconds. Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.10 |
mcastVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4.15 |
mcastVLANEnableMulticast VLAN State: 0 - Disable, 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.15.1 |
mcastVLANVIDMulticast VLAN ID Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.15.2 |
mcastVLANVPMulticast VLAN VP Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.15.3 |
mcastGroupLimitMulticast Group Limit: Default - 3 Multicast Groups for SM, unlimited for AP. Device Allocation: SMrw Integer32 (0|1..5) .1.3.6.1.4.1.17713.21.3.4.17 |
mgmtIF OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4.20 |
mgmtIFEnableSeparate Management Interface Enabled: 0 - Disabled, 1 - Enabled Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.20.1 |
mgmtIFVLANSeparate Management Interface VLAN Enabled: 0 - Disabled, 1 - Enabled Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.20.2 |
mgmtIFVIDSeparate Management Interface VLAN Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.20.3 |
mgmtIFVPSeparate Management Interface VP Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.20.4 |
mgmtIFIPAddressModeSeparate Management IP Address Mode 1 - Static, 2 - DHCP Device Allocation: SMrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.4.20.5 |
mgmtIFIPAddrSeparate Management IP Address Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.20.6 |
mgmtIFNetmaskSeparate Management IP Subnet Mask Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.20.7 |
mgmtIFGatewaySeparate Management IP Gateway Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.20.8 |
networkLanDefaultIPDefault Network IP Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.4.25 |
networkRelaydEnableRelay for forwarding DHCP packets: 0 - Disable 1 - Enable Device Allocation: AP,SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.26 |
networkAliases OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.4.27 |
cambiumIPAliasCnfTableStatic Network Table SEQUENCE OF CambiumIPAliasCnfEntry .1.3.6.1.4.1.17713.21.3.4.27.1 |
cambiumIPAliasCnfEntryStatic Network Table Entry Device Allocation: SM CambiumIPAliasCnfEntry .1.3.6.1.4.1.17713.21.3.4.27.1.1 |
cambiumIPAliasesIndexIP Alias Table Index Table Entry is cleared if Index is set to zero Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.4.27.1.1.1 |
cambiumIPAliasesIpAddrNetwork IP Alliases addressrw IpAddress .1.3.6.1.4.1.17713.21.3.4.27.1.1.2 |
cambiumIPAliasesNetmaskNetwork Dest IP Netmaskrw IpAddress .1.3.6.1.4.1.17713.21.3.4.27.1.1.3 |
cambiumIPAliasesInfoNetwork Info messagerw DisplayString .1.3.6.1.4.1.17713.21.3.4.27.1.1.4 |
cambiumIPAliasesEnableEnable/Disable IP Aliases in Router mode Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.4.27.2 |
snmp OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.5 |
snmpReadOnlyCommunitySNMP read-only community name Device Allocation: AP, SMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.5.1 |
snmpReadWriteCommunitySNMP read-write community name Device Allocation: AP, SMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.5.2 |
snmpSystemNameSNMP System Name Device Allocation: AP, SMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.5.3 |
snmpSystemDescriptionSNMP System Description Device Allocation: AP, SMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.5.4 |
snmpTrapEnableSNMP Trap Support Enable 0 - Disable, 1 - Enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.5.5 |
snmpTrapCommunitySNMP Trap Community Device Allocation: AP, SMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.5.6 |
snmpTrapTableSNMP Trap Servers Table Device Allocation: AP, SM SEQUENCE OF SNMPTrapEntry .1.3.6.1.4.1.17713.21.3.5.7 |
snmpTrapEntrySNMP Trap Table Entry Device Allocation: AP, SM SNMPTrapEntry .1.3.6.1.4.1.17713.21.3.5.7.1 |
snmpTrapEntryIndexSNMP Trap Server IP Table Index Table Entry is cleared if Index is set to zero Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.5.7.1.1 |
snmpTrapEntryIPSNMP Trap Server IP Address Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.5.7.1.2 |
snmpTrapEntryPortSNMP Trap Server Port Number Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.5.7.1.3 |
snmpDomainAccessEnableSNMP Access Domain Enable 0 - Disable, 1 - Enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.5.8 |
snmpDomainAccessIPSNMP Access Domain IP Address Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.5.9 |
snmpDomainAccessIPMaskSNMP Access Domain IP Mask Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.5.10 |
cambiumSystem OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.6 |
systemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.6.1 |
systemConfigTimezoneTime Zone Device Allocation: AP, SMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.6.1.1 |
systemConfigDeviceNameSM Device Name Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.6.1.2 |
systemConfigETSILicenseETSI Country Code. Set the country code using license key on AP. Visit Cambium Webserver to get the license key. The country code set in license key will be used to set country code on AP if the key validation pass. This parameter is for AP only. Device Allocation: APrwobsolete DisplayString .1.3.6.1.4.1.17713.21.3.6.1.3 |
systemConfigSWLockBitSoftware Lock Bit. This bit indicates if the Software Lock Bit is set or not. If the software bit is set then country code needs to be set using License Key from Cambium Webserver 0 - Bit not Set, 1 - Bit is set Device Allocation: AP, SMro Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.6.1.4 |
systemConfigHWLockBitHardware Lock Bit. This bit indicates if the hardware Lock Bit is set or not. If the hardware bit is set then country code cannot be changed. 0 - Bit not Set, 1 - Bit is set Device Allocation: AP, SMro Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.6.1.5 |
systemDeviceLocLatitudeDevice GPS Location Latitude. Coordinates of device in (h ddd.ddddd) format. Used to display location at Google Maps service. Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.6.1.6 |
systemDeviceLocLongitudeDevice GPS Location Longitude. Coordinates of device in (h ddd.ddddd) format. Used to display location at Google Maps service. Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.6.1.7 |
systemDeviceLocHeightDevice GPS Location Longitude. Altitude of device above/below mean sea level. Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.6.1.8 |
systemConfigisGPSkeyOKGPS Lock. This field indicates if the GPS Key is OK. Based on this the GPS is locked on the board. 0 - GPS Key is bad. Sync Source defaulted to Internal GPS only 1 - GPS Key is good. User can set sync source to any value Device Allocation: AProobsolete Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.6.1.10 |
systemConfigGPSLockBitGPS Lock Bit. This bit indicates if the GPS feature Lock Bit is set or not. If the hardware bit is set then GPS synchronisation can't be used. 0 - No limitation of usage GPS synchronisation, 1 - GPS synchronisation not allowed, 2 - The GPSkey required to allow synchronisation Device Allocation: AProobsolete Integer32 .1.3.6.1.4.1.17713.21.3.6.1.11 |
systemConfigSMLockBitSM Lock Bit This bit indicates if the AP is locked for Maximum SM registrations support. If the bit is set then maximum of 10 SMs can be registered on the AP. 0 - No limitation, up to 120 SM registrations are supported, 1 - AP is tiered with 10 SM registrations Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.3.6.1.12 |
systemConfigSMLimitSM Registrations limit, based on Operational License content. Indicates the maximum number of SMs with could be registered to an AP. Valid only in TDD mode if device is AP Lite. Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.3.6.1.13 |
powerSequenceFactoryDefaultSet this to enable or disable the ability to factory default the radio's configuration using the power cycle sequence(explained in the User Guide). 0 - Disabled 1 - Enabled Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.6.1.15 |
systemConfigLockedCCReturn Locked Country Value in case if device is locked for particular country. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.3.6.1.16 |
systemConfigMinAntGainReturn Minimum allowed Antenna Gain. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.3.6.1.17 |
systemConfigOperationalLicenseDevice Operational License. Set Operational License on AP to extend basic functionality. Visit Cambium Webserver to get the license key. ETSI country code and maximum SMs count value will be set on AP if the key validation pass. License is required on locked devices only. Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.6.1.18 |
systemNtpServer OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.6.2 |
systemNtpServerIPModeNTP Server IP Address receive mode 1 - Static, 2 - DHCP Device Allocation: AP, SMrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.6.2.1 |
systemNtpServerPrimaryIPNTP Server 1 IP Address Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.6.2.2 |
systemNtpServerSecondaryIPNTP Server 2 IP Address Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.6.2.3 |
cambiumWebServer OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.7 |
webServiceWeb Service 1 - HTTP, 2 - HTTPS Device Allocation: AP, SMrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.7.1 |
httpPortHTTP Port Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.7.2 |
httpsPortHTTPs Portrw Integer32 .1.3.6.1.4.1.17713.21.3.7.3 |
wireless OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8 |
wirelessDevice OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.1 |
wirelessDeviceCountryCodeCountry Code. If US Lock SKU, this is US and cannot be changed. If not locked, for 9350, it will be None, for 9344, it will be Follow AP CC. When user change CC at SM, the SM Scan Frequency Type will be FA Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.8.1.1 |
wirelessTypeWireless type: 1 - tdd driver, 2 - 80211 (aquila) driver Device Allocation: AP, SMrwobsolete Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.8.1.2 |
wirelessDefaultCountryCodeDefault Country Code.rw DisplayString .1.3.6.1.4.1.17713.21.3.8.1.3 |
wirelessInterface OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.2 |
wirelessInterfaceModeWireless Interface Mode: 1 for AP, 2 for SM, 3 for Spectrum Analyzer Device Allocation: AP, SMrw Integer32 (1|2|3) .1.3.6.1.4.1.17713.21.3.8.2.1 |
wirelessInterfaceSSIDWireless SSID Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.2 |
wirelessInterfaceEncryptionWireless authentication type: 1 - Open mode, 2 - wpa2 mode, 3 - EAP-TTLS Device Allocation: APrw Integer32 (1|2|3) .1.3.6.1.4.1.17713.21.3.8.2.3 |
wirelessInterfaceEncryptionKeyPre-shared authentication key. Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.4 |
wirelessInterfaceHTModeFrequency Bandwidth 1 - 20Mhz, 2 - 40Mhz, 3 - 10Mhz, 4 - 5MHz Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.5 |
wirelessInterfaceTXPowerTX Power (Board Output Conducted) Device Allocation: APrw Integer32 (-24..30) .1.3.6.1.4.1.17713.21.3.8.2.6 |
wirelessInterfaceTDDAntennaGainAntenna Gain Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.7 |
wirelessInterfaceTDDRatioDL/UL Ratio: 1 - 75/25, 2 - 50/50, 3 - 30/70, 4 - Flexible Device Allocation: APrw Integer32 (1|2|3|4) .1.3.6.1.4.1.17713.21.3.8.2.9 |
wirelessInterfaceTPCTRLSet/get target receive level (TRL) Device Allocation: APrw Integer32 (-80..-40) .1.3.6.1.4.1.17713.21.3.8.2.10 |
wirelessInterfaceTPCModePower mode selection. Values:0 - Disable, 1 - Open Loop, 2 - Close Loop When system is in Fixed mode (75/35, 50/50, 30/70), this parameter can only be Close or Open Loop. When system is in Flexible mode, this parameter can be either Close Loop, Open Loop or Disable. The default TPC mode is Close Loop. Device Allocation: APrwobsolete Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.8.2.11 |
wirelessInterfacePTPModePTP Setting 0 - Off 1 - Connect First SM, 2 - MAC Address Limited Device Allocation: APrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.8.2.12 |
wirelessInterfacePTPMACAddressPTP MAC Address Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.13 |
wirelessInterfaceSyncSource1PPS Sync Source 1 - GPS, 2 - CMM4, 3 - Internal Free Run, 4 - CMM3 Device Allocation: APrw Integer32 (1|2|3|4) .1.3.6.1.4.1.17713.21.3.8.2.14 |
wirelessInterfaceSyncHoldTimeGPS Sync Hold Time in seconds Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.15 |
wirelessInterfaceScanFrequencyListTwentyScan Frequency List for 20 MHz Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.16 |
wirelessInterfaceScanFrequencyListFortyScan Frequency List for 40 MHz Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.17 |
centerFrequencyPer freq band: 5725 GHz for 5G SKU, 2407 for 2.4G SKU Device Allocation: APrw Integer32 (0|2407..5970) .1.3.6.1.4.1.17713.21.3.8.2.18 |
dfsAlternative1CenterFrequencyPer freq band Device Allocation: APrw Integer32 (0|2407..5970) .1.3.6.1.4.1.17713.21.3.8.2.19 |
dfsAlternative2CenterFrequencyPer freq band Device Allocation: APrw Integer32 (0|2407..5970) .1.3.6.1.4.1.17713.21.3.8.2.20 |
wirelessMaximumCellSizeMaximum Cell Size in units wirelessCellSizeUnit defines the unit type: 1 - Miles 2 - Kilometers Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.21 |
wirelessCellSizeUnitMaximum Cell Size units: 1 - Miles 2 - Kilometers Device Allocation: APrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.8.2.22 |
wirelessMaximumSTAMaximum Number of SM Device Allocation: APrw Integer32 (0|1..120) .1.3.6.1.4.1.17713.21.3.8.2.23 |
dfsAlternative1BandwidthFrequency Bandwidth 1 - 20Mhz, 2 - 40Mhz, 3 - 10Mhz, 4 - 5Mhz, Device Allocation: APrw Integer32 (1|2|3|4) .1.3.6.1.4.1.17713.21.3.8.2.24 |
dfsAlternative2BandwidthFrequency Bandwidth 1 - 20Mhz, 2 - 40Mhz, 3 - 10Mhz, 4 - 5Mhz, Device Allocation: APrw Integer32 (1|2|3|4) .1.3.6.1.4.1.17713.21.3.8.2.25 |
wirelessAcceptableAPRSSIThresholdAP RSSI Threshold Device Allocation: SMrw Integer32 (-100..-20) .1.3.6.1.4.1.17713.21.3.8.2.26 |
wirelessAcceptableAPCINRThresholdAP CINR Threshold Device Allocation: SMrwobsolete Integer32 (-5..60) .1.3.6.1.4.1.17713.21.3.8.2.27 |
wirelessInterfaceUnblockUSfreqsBlock US 5.2 and 5.4 bands 5.2 and 5.4 bands are blocked until DFS certification is acheived Device Allocation: AP, SMrwobsolete Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.28 |
wirelessMIREnableMaximum Information Rate (MIR) Limiting: 0 - Disable, 1 - Enable Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.29 |
wirelessMIRSTAProfileNumberMaximum Information Rate (MIR) Limiting Profile Number on SM Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.30 |
wirelessMIRAPDefaultProfileNumberMaximum Information Rate (MIR) Limiting Default Profile number on AP This Profile Number will be used by AP is SM provides improper profile Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.31 |
wirelessInterfaceScanFrequencyBandwidthFrequency Bandwidth as bitmask, fields are: 1 - 20Mhz, 2 - 40Mhz, 4 - 10Mhz, 8 - 5Mhz Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.32 |
wirelessInterfaceGuardIntervalGuard Interval: 1 - Long GuardInterval, 2 - Short GuardInterval Device Allocation: APrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.8.2.33 |
wirelessInterfaceiFreqReuseModeFrequency Reuse Mode: 0 - Off, 1 - Frequency-Reuse-Front, 2 - Frequency-Reuse-Back Device Allocation: APrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.8.2.34 |
wirelessSTAPrioritySM priority value: 0 - Normal, 1 - High, 2 - Low Device Allocation: SMrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.8.2.35 |
wirelessSmoothingBitSmoothing Bit values: 0 - Bit is cleared, smoothing is off, 1 - Bit is set, smoothing is on Device Allocation: APrwobsolete Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.36 |
wirelessSecurityMethodAllowed types of authentications on SM side (Preferred AP list is not set) Use bitmask to enable pereferred methods, 0 - means enable method: set 0-th bit to 0 - Open method (110b) set 1-st bit to 0 - WPA2 method (101b) set 2-nd bit to 0 - EAP-TTLS method (011b) 0x00 - All enabledrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.37 |
wirelessAcceptableAPSNRThresholdAP CINR Threshold Device Allocation: SMrw Integer32 (-5..60) .1.3.6.1.4.1.17713.21.3.8.2.38 |
wirelessMgmtPacketRateManagement rate: 0 - MCS0 1 - MCS1 Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.39 |
wirelessStaIsolateEnables or disables bridging within the AP driver between SMs. 0 - Disabled 1 - Enabled Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.40 |
wirelessCcaEnableClear Channel Assignment: 0 - Disable 1 - Enable Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.41 |
wirelessInterfaceScanFrequencyListTenScan Frequency List for 10MHz Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.42 |
wirelessInterfaceScanFrequencyListFiveScan Frequency List for 5MHz Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.43 |
wirelessMulticastEnhanceModeMulticast enhancement mode 0 - Disabled 3 - IGMP Snooping + MC Passthru Device Allocation: APrw Integer32 (0|3) .1.3.6.1.4.1.17713.21.3.8.2.44 |
wirelessTXPowerManualLimitAllow user to limit MAX output TX Power Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.48 |
wirelessRateMaxMCSAllow user to set MAX TX rate Not allowed for SNMP processing Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.49 |
wirelessSMWifiDistanceDistance to AP for SM in Standard Wi-Fi mode wirelessCellSizeUnitdefines the unit type: 1 - Miles 2 - Kilometers Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.50 |
wirelessInterfaceProtocolModeProtocol Module Mode: 1 - TDD 2 - AP/SM WiFi 3 - PTP.LL 4 - TDD PTP Device Allocation: AP/SMrw Integer32 (1|2|3|4) .1.3.6.1.4.1.17713.21.3.8.2.51 |
forceMcastBcast4Addr1 - TRUE 0 - FALSErw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.53 |
wirelessInterfaceRateMinMCSMinimum locked MCS rate. Default allocation: AP, SM.rw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.55 |
wirelessInterfaceRateMaxMCSMaximum locked MCS rate. Default allocation: AP, SM.rw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.56 |
wirelessMulticastIgmpFastLeaveMulticast enhancement mode 0 - IGMP Fast Leave OFF 1 - IGMP Fast Leave ON Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.57 |
wirelessInterfaceTDDFrameSizeTDD Frame Duration in microseconds 2500 - 2.5 ms 5000 - 5 ms Device Allocation: APrw Integer32 (2500|5000) .1.3.6.1.4.1.17713.21.3.8.2.58 |
wirelessInterfaceColocStateCo-location state 0 - disabled 1 - FSK co-location Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.59 |
wirelessInterfaceColocSystemSyncSrcCo-location state 1 - GPS, 2 - CMM4, 4 - CMM3 Device Allocation: APrw Integer32 (1|2|4) .1.3.6.1.4.1.17713.21.3.8.2.60 |
wirelessAPWifiWLANmodeAP Wi-Fi WLAN mode (short, 1000m operational distance) 0 - Disabled, 1 - Enabled Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.61 |
apWiFiDLCTSModeForce AP WiFi to enable Self CTS 0 - Disabled, 1 - Enabled Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.62 |
apWiFiULCTSRTSModeForce AP WiFi to add ERP IE to the Beacon 0 - Disabled, 1 - Enabled Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.63 |
apWiFiRTSThresholdWi-Fi interface RTS Threshold Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.64 |
wirelessMACFilterEnable/Disable MAC list filter 0 - Disabled, 1 - Enabled Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.8.2.70 |
wirelessMACFilterPolicyPermit/Prevent policy for MAC list 1 - Prevent 2 - Permit Device Allocation: APrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.8.2.71 |
wirelessMACFilterTableTable for MAC filter list Device Allocation: AP SEQUENCE OF WirelessMACFilterEntry .1.3.6.1.4.1.17713.21.3.8.2.72 |
wirelessMACFilterEntryL2 ACL Table Entry Device Allocation: AP WirelessMACFilterEntry .1.3.6.1.4.1.17713.21.3.8.2.72.1 |
wirelessMACFilterIndexMAC filter list table Index(equal max STA) Table Entry is cleared if Index is set to zero Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.2.72.1.1 |
wirelessFilterMACMAC of SM for filter table Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.72.1.2 |
wirelessFilterInfoDescription for MAC in the filter table Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.8.2.72.1.3 |
wirelessPrefList OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.3 |
prefferedAPTablePreffered AP Table Device Allocation: SM SEQUENCE OF PrefferedAPEntry .1.3.6.1.4.1.17713.21.3.8.3.1 |
prefferedAPEntryPreffered SSID Table Entry Device Allocation: SM PrefferedAPEntry .1.3.6.1.4.1.17713.21.3.8.3.1.1 |
prefferedListTableEntryIndexPreferred AP Table Index Table Entry is cleared if Index is set to zero Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.8.3.1.1.1 |
prefferedListTableEntrySSIDPreferred AP SSID Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.3.1.1.2 |
prefferedListTableEntryKEYPreferred AP Shared Key Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.3.1.1.3 |
prefferedListTableSecurityMethodAuthentication modes to connect to AP Device Allocation: SM Use bitmask to enable pereferred methods, 0 - means enable method: set 0-th bit to 0 - Open method (110b) set 1-st bit to 0 - WPA2 method (101b) set 2-nd bit to 0 - EAP-TTLS method (011b) 0x00 - All enabledrw Integer32 .1.3.6.1.4.1.17713.21.3.8.3.1.1.4 |
wirelessMIRList OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.4 |
wirelessMIRProfileTableMaximum Information Rate (MIR) Limiting profile Table Device Allocation: AP SEQUENCE OF WirelessMIRProfileEntry .1.3.6.1.4.1.17713.21.3.8.4.1 |
wirelessMIRProfileEntryMaximum Information Rate (MIR) Limiting profile Table Entry Device Allocation: AP WirelessMIRProfileEntry .1.3.6.1.4.1.17713.21.3.8.4.1.1 |
wirelessMIRProfileIndexMaximum Information Rate (MIR) Limiting profile Number Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.4.1.1.1 |
wirelessMIRProfileNumberNumber of MIR profile Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.4.1.1.2 |
wirelessMIRProfileDescriptionMIR profile description Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.8.4.1.1.3 |
wirelessDLMIRDL MIR in kilobits per second Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.4.1.1.4 |
wirelessULMIRUL MIR in kilobits per second Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.4.1.1.5 |
wirelessRadius OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.5 |
wirelessRadiusTimeoutRADIUS server response timeout Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.5.1 |
wirelessRadiusRetryRADIUS server retry Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.5.2 |
wirelessRadiusGUIUserAuthSM GUI User Authentication Option 0 - Device Local Only 1 - Remote RADIUS Server Only 2 - Remote RADIUS Server and Fallback to Local Device Allocation: APrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.8.5.3 |
wirelessRadiusCurrentGUIUserAuthCurrent GUI User Authentication Option 0 - Device Local Only 1 - Remote RADIUS Server Only 2 - Remote RADIUS Server and Fallback to Local Device Allocation: SMro Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.8.5.4 |
wirelessRadiusSeverInfoRADIUS server info Device Allocation: SMro DisplayString .1.3.6.1.4.1.17713.21.3.8.5.5 |
wirelessRadiusIdentityStrAuthentication Identity String Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.5.6 |
wirelessRadiusIdentityRealmAuthentication Identity Realm Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.5.7 |
wirelessRadiusUsernameAuthentication Username Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.5.8 |
wirelessRadiusPasswordAuthentication Password Device Allocation: SMrw DisplayString .1.3.6.1.4.1.17713.21.3.8.5.9 |
useMACAddressAsWirelessRadiusUsernameFor using an Ethernet MAC address instead of RADIUS username 0 - Off (default), 1 - using ':' as format, 2 - using '-' as format Device Allocation: SMrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.8.5.10 |
wirelessRadiusServerList OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.6 |
wirelessRadiusServerTableRADIUS servers table Device Allocation: AP SEQUENCE OF WirelessRadiusServerEntry .1.3.6.1.4.1.17713.21.3.8.6.1 |
wirelessRadiusServerEntryRADIUS servers table entry Device Allocation: AP WirelessRadiusServerEntry .1.3.6.1.4.1.17713.21.3.8.6.1.1 |
wirelessRadiusServerIndexRADIUS servers limiting number Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.6.1.1.1 |
wirelessRadiusServerIPRADIUS server IP address Device Allocation: APrw IpAddress .1.3.6.1.4.1.17713.21.3.8.6.1.1.2 |
wirelessRadiusServerPortRADIUS server port Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.3.8.6.1.1.3 |
wirelessRadiusServerSecretRADIUS server port Device Allocation: APrw DisplayString .1.3.6.1.4.1.17713.21.3.8.6.1.1.4 |
wirelessRadiusCertificateList OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.7 |
wirelessRadiusCertificateListRow1 OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.7.1 |
wirelessRadiusUseDefCertificateRADIUS default certificate use Device Allocation: SMrwobsolete Integer32(0|1) .1.3.6.1.4.1.17713.21.3.8.7.1.1 |
wirelessRadiusDefCertificateViewRADIUS default certificate view Device Allocation: AProobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.8.7.1.2 |
wirelessRadiusCertificateListRow2 OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.7.2 |
wirelessRadiusUser1CertificateNameFirst user RADIUS certificate name Device Allocation: APrwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.8.7.2.1 |
wirelessRadiusUser1CertificateViewFirst user RADIUS certificate view Device Allocation: AProobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.8.7.2.2 |
wirelessRadiusCertificateListRow3 OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.7.3 |
wirelessRadiusUser2CertificateNameSecond user RADIUS certificate name Device Allocation: APrwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.8.7.3.1 |
wirelessRadiusUser2CertificateViewSecond user RADIUS certificate view Device Allocation: AProobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.3.8.7.3.2 |
wirelessRadiusCertificateSet OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.8 |
wirelessRadiusDefaultCertificateDefault RADIUS certificate Device Allocation: SMro OCTET STRING .1.3.6.1.4.1.17713.21.3.8.8.1 |
wirelessRadiusUser1CertificateDefault RADIUS certificate Device Allocation: SMrw OCTET STRING .1.3.6.1.4.1.17713.21.3.8.8.2 |
wirelessRadiusUser2CertificateDefault RADIUS certificate Device Allocation: SMrw OCTET STRING .1.3.6.1.4.1.17713.21.3.8.8.3 |
wirelessRadiusUseDefaultCertificateRADIUS default certificate use Device Allocation: SMrw Integer32(0|1) .1.3.6.1.4.1.17713.21.3.8.8.4 |
wirelessRadiusExtraCertificateSet OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.9 |
wirelessRadiusPMP320CertificatePMP320 RADIUS certificate Device Allocation: SMro OCTET STRING .1.3.6.1.4.1.17713.21.3.8.9.1 |
wirelessRadiusUsePMP320CertificateRADIUS PMP320 certificate use Device Allocation: SMrw Integer32(0|1) .1.3.6.1.4.1.17713.21.3.8.9.2 |
wirelessRadiusPMP450CertificatePMP450 RADIUS certificate Device Allocation: SMro OCTET STRING .1.3.6.1.4.1.17713.21.3.8.9.3 |
wirelessRadiusUsePMP450CertificateRADIUS PMP450 certificate use Device Allocation: SMrw Integer32(0|1) .1.3.6.1.4.1.17713.21.3.8.9.4 |
multicast OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.8.10 |
l2Firewall OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.9 |
l2FirewallEnableL2 ACL Status Flag: 0 - Disable, 1 - Enable. Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.9.1 |
l2FirewallTableTable for L2 ACL Device Allocation: AP, SM SEQUENCE OF L2FirewallEntry .1.3.6.1.4.1.17713.21.3.9.2 |
l2FirewallEntryL2 ACL Table Entry Device Allocation: AP, SM L2FirewallEntry .1.3.6.1.4.1.17713.21.3.9.2.1 |
l2FirewallEntryIndexL2 Firewall Table Index Table Entry is cleared if Index is set to zero Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.9.2.1.1 |
l2FirewallEntryNameL2 ACL Rule Name. Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.9.2.1.2 |
l2FirewallEntryActionAction: 0 - Reject, 1 - Permit. Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.9.2.1.3 |
l2FirewallEntryInterfaceInterface: 1 - WAN, 2 - LAN. Device Allocation: AP, SMrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.9.2.1.4 |
l2FirewallEntryLogLog: 1 - On, 0 - Off. Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.9.2.1.5 |
l2FirewallEntryEtherTypeL2 ACL Ethernet type: 0000-ffff Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.9.2.1.6 |
l2FirewallEntryVlanIDL2 ACL Vlan ID Device Allocation: AP, SMrw Integer32 (0|1..4094) .1.3.6.1.4.1.17713.21.3.9.2.1.7 |
l2FirewallEntrySrcMACL2 ACL Source MAC Address Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.9.2.1.8 |
l2FirewallEntrySrcMaskL2 ACL Source MAC Address Mask Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.9.2.1.9 |
l2FirewallEntryDstMACL2 ACL Destination MAC Address Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.9.2.1.10 |
l2FirewallEntryDstMaskL2 ACL Destination MAC Address Mask Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.9.2.1.11 |
l2WanRemoteAccessRemote Access To AP Through Wan: 0 - Decline, 1 - Allow Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.9.3 |
l2SnmpLanRemoteAccessSNMP access from LAN: 0 - Decline, 1 - Allow Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.9.4 |
l2DHCPServersBelowSTAAllow DHCP Servers Below SM: 0 - Decline, 1 - Allow Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.9.5 |
l2LanRemoteAccessSM Management Access Through LAN: 0 - Wireless Only, 1 - Ethernet and Wireless Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.9.6 |
l3Firewall OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.10 |
l3FirewallEnableL3 ACL Rule Status 1 - Enable, 0 - Disable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.10.1 |
l3FirewallTableL3 Firewall Table Device Allocation: AP, SM SEQUENCE OF L3FirewallEntry .1.3.6.1.4.1.17713.21.3.10.2 |
l3FirewallEntryL3 Firewall Table Entry Device Allocation: AP, SM L3FirewallEntry .1.3.6.1.4.1.17713.21.3.10.2.1 |
l3FirewallEntryIndexL3 ACL Table Index Table Entry is cleared if Index is set to zero Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.10.2.1.1 |
l3FirewallEntryNameL3 ACL Rule Name Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.10.2.1.2 |
l3FirewallEntryActionL3 ACL Rule Acrion 0 - Reject, 1 - Permit Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.10.2.1.3 |
l3FirewallEntryInterfaceL3 ACL Rule Interface 1 - WAN, 2 - LAN Device Allocation: AP, SMrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.3.10.2.1.4 |
l3FirewallEntryLogL3 ACL Rule Log Flag 1 - Rule Loggin is On, 0 - Rule Logging is Off Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.10.2.1.5 |
l3FirewallEntryProtocolL3 ACL Rules IP Protocol 1 - TCP, 2 - UDP, 3 - TCP+UDP, 4 - ICMP, 5 - IP Device Allocation: AP, SMrw Integer32 (0|1|2|3|4|5) .1.3.6.1.4.1.17713.21.3.10.2.1.6 |
l3FirewallEntryPortL3 ACL Rule Port Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.10.2.1.7 |
l3FirewallEntrySrcIPL3 ACL Rule Source IP Address Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.10.2.1.8 |
l3FirewallEntrySrcMaskL3 ACL Rule Source Network Mask Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.10.2.1.9 |
l3FirewallEntryDstIPL3 ACL Rule Destination IP Address Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.10.2.1.10 |
l3FirewallEntryDstMaskL3 ACL Rule Destination Network Mask Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.10.2.1.11 |
l3FirewallEntryDSCPL3 ACL Rule DSCP Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.10.2.1.12 |
l3FirewallEntryToSL3 ACL Rule TOS Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.10.2.1.13 |
confQoS OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.11 |
voipEnableVoIP Enable: 0 - disable, 1 - enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.11.1 |
qosEnableEnable QoS: 0 - disable, 1 - enable Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.11.2 |
classificationListTableQuality of Service rules Table Device Allocation: AP, SM SEQUENCE OF ClassificationListEntry .1.3.6.1.4.1.17713.21.3.11.3 |
classificationListEntryQuality of Service Rule Entry Device Allocation: AP, SM ClassificationListEntry .1.3.6.1.4.1.17713.21.3.11.3.1 |
classificationRuleIndexQoS Rule Table Index Table Entry is cleared if Index is set to zero Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.11.3.1.1 |
classificationRuleTypeQoS Rule Type: 1 - voip, 2 - dscp, 3 - cos, 4 - vlanid, 5 - ethertype, 6 - ipv4, 7 - mac, 8 - broadcast, 9 - multicast Device Allocation: AP, SMrw Integer32 (0|1..9) .1.3.6.1.4.1.17713.21.3.11.3.1.2 |
classificationRuleValueQoS Rule Value. Qos rule value is valid only for dscp, cos, vlanid and ethertype Rule types Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.3.11.3.1.3 |
classificationRuleIPQoS IP Address Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.3.11.3.1.4 |
classificationRuleMACQoS MAC Address Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.11.3.1.5 |
classificationRuleMaskQoS Netmask Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.3.11.3.1.6 |
classificationRuleDirectionIP or MAC Rules direction: 1 - Source, 2 - Destination, 3 - Either (or Both directions) Device Allocation: AP, SMrw Integer32 (0|1..3) .1.3.6.1.4.1.17713.21.3.11.3.1.7 |
classificationRuleQueueRule Queue: 1- Hight, 2 - Low, 3 - VoIP Device Allocation: AP, SMrw Integer32 (0|1..3) .1.3.6.1.4.1.17713.21.3.11.3.1.8 |
mcPriorityMulticast Priority: 0 - low, 1 - high Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.11.4 |
bcPriorityBroadcast Priority: 0 - low, 1 - high Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.11.5 |
dmz OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.12 |
dmzEnableEnable DMZ: 1 - Enable, 0 - Disable. Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.12.1 |
dmzIPAddressDMZ IP Address. Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.12.2 |
portForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.13 |
portForwardingEntryEnablePort Forwarding feature: 0 - Disable, 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.13.1 |
portForwardingTablePort Forwarding Rules Table Device Allocation: SM SEQUENCE OF PortForwardingEntry .1.3.6.1.4.1.17713.21.3.13.2 |
portForwardingEntryPort Forwarding Table Rule Entry Device Allocation: SM PortForwardingEntry .1.3.6.1.4.1.17713.21.3.13.2.1 |
portForwardingTableEntryIndexPort Forwarding Table Entry Index Table Entry is cleared if Index is set to zero Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.13.2.1.1 |
portForwardingTableEntryProtocolPort Forwarding Table Entry Rule Protocol: 0 - Clear Rule, 1 - UDP, 2 - TCP, 3 - UDP+TCP Device Allocation: SMrw Integer32 (0|1|2|3) .1.3.6.1.4.1.17713.21.3.13.2.1.2 |
portForwardingTableEntryWLANPortBeginPort Forwarding WLAN Port Start number Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.13.2.1.3 |
portForwardingTableEntryWLANPortEndPort Forwarding WLAN Port End number Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.13.2.1.4 |
portForwardingTableEntryLANIPPort Forwarding LAN IP Address Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.13.2.1.5 |
portForwardingTableEntryWLANPortMappedBeginPort Forwarding Mapped Port number Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.13.2.1.6 |
portForwardingSepMangIPEntryEnableSM Separate Management IP Port Forwarding feature: 0 - Disable, 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.13.3 |
portForwardingSepMangIPTableSM Separate Management IP Port Forwarding Rules Table Device Allocation: SM SEQUENCE OF PortForwardingSepMangIPEntry .1.3.6.1.4.1.17713.21.3.13.4 |
portForwardingSepMangIPEntrySM Separate Management IP Port Forwarding Table Rule Entry Device Allocation: SM PortForwardingSepMangIPEntry .1.3.6.1.4.1.17713.21.3.13.4.1 |
portForwardingSepMangIPTableEntryIndexSM Separate Management IP Port Forwarding Table Entry Index Table Entry is cleared if Index is set to zero Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.13.4.1.1 |
portForwardingSepMangIPTableEntryProtocolSM Separate Management IP Port Forwarding Table Entry Rule Protocol: 0 - Clear Rule, 1 - UDP, 2 - TCP, 3 - UDP+TCP Device Allocation: SMrw Integer32 (0|1|2|3) .1.3.6.1.4.1.17713.21.3.13.4.1.2 |
portForwardingSepMangIPTableEntryWLANPortBeginSM Separate Management IP Port Forwarding WLAN Port Start number Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.13.4.1.3 |
portForwardingSepMangIPTableEntryWLANPortEndSM Separate Management IP Port Forwarding WLAN Port End number Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.13.4.1.4 |
portForwardingSepMangIPTableEntryLANIPSM Separate Management IP Port Forwarding LAN IP Address Device Allocation: SMrw IpAddress .1.3.6.1.4.1.17713.21.3.13.4.1.5 |
portForwardingSepMangIPTableEntryWLANPortMappedBeginSM Separate Management IP Port Forwarding Mapped Port number Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.13.4.1.6 |
vlans OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.14 |
membershipVLANTableMembership VLAN Rules Table Device Allocation: SM SEQUENCE OF MembershipVLANEntry .1.3.6.1.4.1.17713.21.3.14.3 |
membershipVLANEntryMembership VLAN Table Rule Entry Device Allocation: SM MembershipVLANEntry .1.3.6.1.4.1.17713.21.3.14.3.1 |
membershipVLANTableEntryIndexMembership VLAN Table Entry Index Table Entry is cleared if Index is set to zero Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.14.3.1.1 |
membershipVLANTableEntryVIDBeginMembership VLAN Table Entry VLAN ID Begin Device Allocation: SMrw Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.3.14.3.1.2 |
membershipVLANTableEntryVIDEndMembership VLAN Table Entry VLAN ID End Device Allocation: SMrw Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.3.14.3.1.3 |
mappingVLANTableMapping VLAN Rules Table Device Allocation: SM SEQUENCE OF MappingVLANEntry .1.3.6.1.4.1.17713.21.3.14.5 |
mappingVLANEntryMapping VLAN Table Rule Entry Device Allocation: SM MappingVLANEntry .1.3.6.1.4.1.17713.21.3.14.5.1 |
mappingVLANTableEntryIndexMapping VLAN Table Entry Index Table Entry is cleared if Index is set to zero Device Allocation: SMrw Integer32 .1.3.6.1.4.1.17713.21.3.14.5.1.1 |
mappingVLANTableEntryCVLANMapping VLAN Table C-VLAN ID, Defines VLAN ID to be mapped from CPE side. Device Allocation: SMrw Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.3.14.5.1.2 |
mappingVLANTableEntrySVLANMapping VLAN Table S-VLAN ID, Defines VLAN ID to be mapped from Service provider. Device Allocation: SMrw Integer32 (0|1..4095) .1.3.6.1.4.1.17713.21.3.14.5.1.3 |
dlkm OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.15 |
dlkmNATSIPHelpersEnables Auxiliary Netfilter NAT SIP Helper modules support: 0 - Disable, 1 - Enabled Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.15.1 |
routing OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.16 |
staticRoutesEnableMainStatic Routes trigger 0 - Disable 1 - Enablerw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.16.1 |
cambiumStaticRoutesCnfTableStatic Routes Table SEQUENCE OF CambiumStaticRoutesCnfEntry .1.3.6.1.4.1.17713.21.3.16.2 |
cambiumStaticRoutesCnfEntryStatic Routes Dest/Getway pair entry CambiumStaticRoutesCnfEntry .1.3.6.1.4.1.17713.21.3.16.2.1 |
cambiumStaticRoutesCnfIndexIndexrw Integer32 .1.3.6.1.4.1.17713.21.3.16.2.1.1 |
cambiumStaticRoutesCnfDestIPDestination IPrw IpAddress .1.3.6.1.4.1.17713.21.3.16.2.1.2 |
cambiumStaticRoutesCnfGWGetway IPrw IpAddress .1.3.6.1.4.1.17713.21.3.16.2.1.3 |
cambiumStaticRoutesCnfNetmaskDest IP Netmaskrw IpAddress .1.3.6.1.4.1.17713.21.3.16.2.1.4 |
cambiumStaticRoutesCnfEnblStatic Routes enable an entryrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.16.2.1.5 |
cambiumStaticRoutesCnfInfoStatic Routes Interface Namerw DisplayString .1.3.6.1.4.1.17713.21.3.16.2.1.6 |
cambiumDeviceAgent OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.20 |
cambiumDeviceAgentEnableRemote Management: 0 - Disable 1 - Enable Cambium provides cloud management of Cambium devices called cnMaestro. This allows a user to manage all of their various Cambium devices via the web from any location in the world. This field enables this cnMaestro Cloud Management.rw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.20.1 |
cambiumDeviceAgentCNSURLcnMaestro URL: This specifies the URL for accessing the cnMaestro Cloud Managerrw DisplayString .1.3.6.1.4.1.17713.21.3.20.2 |
cambiumCNSDeviceAgentIDCambium ID: This is a user name for the cnMaestro Remote Management system. This is used with the 'Onboarding Key' to on-board older Cambium devices, which are not provisioned with an MSN in the Cambium factory.rw DisplayString .1.3.6.1.4.1.17713.21.3.20.3 |
cambiumCNSDeviceAgentPasswordOnboarding Key: This is a password for the cnMaestro Remote Management system. This is used with the 'Cambium ID' to on-board older Cambium devices, which are not provisioned with an MSN in the Cambium factory.rw DisplayString .1.3.6.1.4.1.17713.21.3.20.4 |
upnpd OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.21 |
networkUPNPEnable UPnP on SM in NAT mode 0 - Disable, 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.21.1 |
networkNATPMPEnable NAT-PMP on SM in NAT mode 0 - Disable, 1 - Enable Device Allocation: SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.21.2 |
lldpd OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.3.23 |
networkLLDPEnable LLDP 0 - Disable, 1 - Enable Device Allocation: AP,SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.3.23.1 |
networkLLDPModeLLDP mode 1 - receive and transmit LLDPDU 2 - only receive LLDPDU Device Allocation: AP,SMrw Integer32 (1|2) .1.3.6.1.4.1.17713.21.3.23.2 |
cambiumpmp80211SystemActions OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.4 |
cambiumpmp80211DeviceRebootOID for Device Reboot, send reboot command to device Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.1 |
cambiumpmp80211ConfigurationResetOID for System Configuration reset to Defaults Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.2 |
cambiumpmp80211ConfigurationSaveOID for configuration save Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.3 |
cambiumpmp80211ConfigurationApplyOID for configuration Apply Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.4 |
cambiumpmp80211ConfigurationDiscardOID for configuration Discard Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.5 |
cambiumpmp80211ConfigurationStateSystem configuration state OID. Bit masks: 0000 0001 - System is configured. 0000 0010 - There are unsaved changesets. 0000 0100 - There are unrestarted services. 0000 1000 - Needed reboot of the system. 0001 0000 - Configurations was reset. 0010 0000 - Services restarting in process. 0100 0000 - Software Update performed. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.4.6 |
cambiumpmp80211SoftwareUpdateSystem OID for Software Update Agent, SW Update link value can be either remote firmware link (http, https, ftp), or local file link: /tmp/firmware.tar.gz NOTE: Device is automatically rebooted if link type is remote Device Allocation: AP, SMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.4.7 |
cambiumpmp80211SoftwareUpdateStatusSoftware Update Status OID 0 - No SW Update is pending or No SW upgrade occurs, 1 - SW Update is in progress, Uploading image to device, 2 - SW Update is in progress, Verifying SHA2 signature, 3 - SW Update is in progress, Executing pre-update script, 4 - SW Update is in progress, Uploading image to flash, 5 - SW Update is in progress, Uploading u-boot to flash, 6 - SW Update is in progress, Executing post-update script, 7 - SW Update is finished, waiting for reboot, 8 - SW Update is in progress, Executing config down-grade script When SW Update is successfully, return value is 7, GUI or NMS indicate that SW update was successful, Device can be rebooted. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.4.8 |
cambiumpmp80211STAListUpdateSystem OID for SM List update When this OID is received, Connected SM list table is getting updated with actual SM list Device Allocation: APrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.9 |
cambiumpmp80211STAListUpdateStatusSta List Update Status OID. This OID is used to indicate SM list table status: 0 - No SMs are registerd to AP 1 - SM List Table is getting updated 2 - SM Data is ready Device Allocation: APrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.4.10 |
cambiumpmp80211APListUpdateSystem OID for AP List update When this OID is received, Scanned AP list table is getting updated with actual AP scan list Device Allocation: SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.11 |
cambiumpmp80211APListUpdateStatusAP List Update Status OID. This OID is used to indicate AP list table status: 0 - No APs are available in the list 1 - AP List Table is getting updated 2 - AP Data is ready Device Allocation: SMrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.4.12 |
cambiumpmp80211SoftwareUpdateErrorSoftware Update error code: 0 - Finished successfully, waiting for reboot 1 - SW update file download failed 2 - Unpack failed, damaged or wrong format package 3 - Firmware digital signature check failed 4 - U-Boot digital signature check failed 5 - Firmware FLASH write failed 6 - U-Boot FLASH write failed 7 - Boot partition switch failed 8 - Board SKU is not supported for this firmware 9 - Can't read firmware version, upgrade is impossible 10 - Down-grade not supported for 802.11 driver 11 - Down-grade below 2.3.1 is not supported for AP Lite device 12 - Down-grade not supported for non SM TDD mode 13 - Down-grade below 2.4.2 not supported for Ironman/Ironland board type 14 - Down-grade below 2.5.0 not supported for AP WiFi 15 - Down-grade below 2.4.3 not supported for Reset Via Power Sequence 16 - Down-grade below 2.4.3 not supported for Particular Country Locked device 17 - Down-grade below 2.5.0 not supported for 2.5ms mode 18 - Down-grade below 2.5.2 not supported for Use MAC Address as EAP-TTLS Username 19 - Down-grade below 2.6.0 not supported for 5/10Mhz BW for WiFi & ePTP mode 20 - Down-grade below 2.6.0 not supported for Separate Management IP Port Forwarding 21 - General error. Device has no free memory 22 - General error code Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.4.13 |
cambiumpmp80211StatsPerSTAListUpdateStatusStats per SM List Update Status OID. This OID is used to indicate Stats per SM list table status: 0 - No SMs are registerd to AP 1 - TBD 2 - TBDrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.4.14 |
cambiumpmp80211StatsPerSTAListUpdateSystem OID for Stats per SM table update When this OID is received, Stats per SM table is getting updated with actual datarw Integer32 (1) .1.3.6.1.4.1.17713.21.4.15 |
cambiumpmp80211STADisconnectSystem OID for particular SM disconnection Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.4.16 |
cambiumpmp80211GPSAutopopulateSystem action to auto-populate GPS stats for device into system configuration device location for latitude, longitude and height Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.17 |
cambiumpmp80211SoftwareUpdateErrorStrSoftware Update error, text descriprionro DisplayString .1.3.6.1.4.1.17713.21.4.18 |
cambiumpmp80211GpsFirmwareUpdateSystem OID for GPS Firmware Update Agent, Gps FW Update link value can be either remote firmware link (http, https, ftp), or local file link: /tmp/firmware.tar.gz NOTE: Device is automatically rebooted if link type is remote Device Allocation: AP, SMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.4.19 |
cambiumpmp80211GpsFirmwareUpdateErrorFirmware Update error code: 0 - Finished successfully 1 - SW update file download failed 2 - Unpack failed, damaged or wrong format package, or file access error 3 - GPS Firmware digital signature check failed 4 - GPS DA digital signature check failed 5 - GPS DA download to GPS device failed 6 - GPS FW download to GPS device failed 7 - Board SKU is not supported for this firmware 8 - GPS general communication error Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.4.21 |
cambiumpmp80211GpsFirmwareUpdateErrorStrGPS Firmware Update error, text descriptionro DisplayString .1.3.6.1.4.1.17713.21.4.22 |
cambiumBridgeTableAPStatusAP Bridge Table Update Status OID. This OID is used to indicate bridge table status: 0 - Bridge table is empty 1 - Bridge table is filled with data 2 - AP Data is ready Device Allocation: APrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.4.25 |
cambiumBridgeTableSTAUpdateSystem OID for AP Bridge Table update. When this OID is received, bridge table is getting updated with actual bridge table list Device Allocation: SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.26 |
cambiumBridgeTableSTAStatusBridge Table Update Status OID. This OID is used to indicate bridge table status: 0 - Bridge table is empty 1 - Bridge table is filled with data 2 - SM Data is ready Device Allocation: SMrw Integer32 (0|1|2) .1.3.6.1.4.1.17713.21.4.27 |
cambiumBridgeTableAPUpdateSystem OID for Bridge Table update. When this OID is received, bridge table is getting updated with actual bridge table list Device Allocation: APrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.28 |
cambiumForceTabUpdDHCPForce update DHCP Host table, 1 - Force action Device Allocation: SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.30 |
cambiumForceTabUpdTrapForce update SNMP Trap table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.31 |
cambiumForceTabUpdl2FrwForce update l2 Firewal table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.32 |
cambiumForceTabUpdl3FrwForce update l3 Firewal table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.33 |
cambiumForceTabUpdQosForce update Quality of Service table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.34 |
cambiumForceTabUpdPortFwForce update Port Forwarding table, 1 - Force action Device Allocation: SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.35 |
cambiumForceTabUpdVlanForce update Membership VLAN table, 1 - Force action Device Allocation: SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.36 |
cambiumForceTabUpdMappingVlanForce update VLAN Mapping table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.37 |
cambiumConfigurationApplyOnRebootOID for configuration Apply on stage of device reboot. Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.38 |
cambiumForceSTARescanforce a STA rescan, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.39 |
cambiumForceTabUpdMcastDenyForce update Multicast deny table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.40 |
cambiumForceTabUpdStaticRoutesCnfForce update Static Routes Conf table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.41 |
cambiumForceTabUpdMIRForce update MIR table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.42 |
cambiumForceTabUpdRadiusServForce update Radius Server table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.43 |
cambiumForceTabUpdPrefAPListForce update Preferred AP list table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.44 |
cambiumForceTabUpdAPAliasForce update AP Alias table, 1 - Force action Device Allocation: AP, SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.45 |
cambiumForceTabUpdPortFwSepMangIPForce update Separate Management IP Port Forwarding table, 1 - Force action Device Allocation: SMrw Integer32 (1) .1.3.6.1.4.1.17713.21.4.46 |
cambiumpmp80211Tools OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6 |
cambiumLinkTest OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6.1 |
cambiumLinkTestDurationLink Test Duration OID. Device Allocation: AP, SMrw Integer32 (2|4|6|8|10|12|14|16|18|20) .1.3.6.1.4.1.17713.21.6.1.1 |
cambiumLinkTestPckSizeLink Test Packet Size OID. Device Allocation: AP, SMrw Integer32 (128|800|1500) .1.3.6.1.4.1.17713.21.6.1.2 |
cambiumLinkTestStartForMACThe Link Test Destination MAC address. Start Link Test by write this OID. Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.6.1.3 |
cambiumLinkTestStatusThe Link Test Status OID. 0: WAIT 1: START 2: BUSY 3: SUCCESS 4: SUCCESS (PREF PERIOD) 5: ERROR UNREACHABLE 6: ERROR FAIL Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.1.4 |
cambiumLinkTestResultDateThe Link Test Result Timestamp Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.1.5 |
cambiumLinkTestResultULLink Test Result Uplink. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.1.6 |
cambiumLinkTestResultDLLink Test Result Downlink. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.1.7 |
caminfo OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6.2 |
caminfoScanFrequencyListCountryCountry for Frequency List 20/40 MHz band Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.6.2.1 |
caminfoScanFrequencyListTwentyBandScan Frequency List for 20 MHz band Device Allocation: SMro DisplayString .1.3.6.1.4.1.17713.21.6.2.2 |
caminfoScanFrequencyListFortyBandScan Frequency List for 40 MHz band Device Allocation: SMro DisplayString .1.3.6.1.4.1.17713.21.6.2.3 |
caminfoScanFrequencyListAllow59bandAllow 59 band if the board is calibrated using new frequency values. 0 - Do not Allow 1 - Allow Device Allocation: AP, SMro Integer32 (0|1) .1.3.6.1.4.1.17713.21.6.2.4 |
cambiumToolBar OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6.3 |
cambiumToolBarOpts OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6.3.1 |
cambiumInternetConnectionServerIPInternet Connection Server IP Address This is auxiliary IP address to ping in order to define Internet connection Status Device Allocation: AP, SMrw IpAddress .1.3.6.1.4.1.17713.21.6.3.1.1 |
cambiumInternetConnectionPollPeriodInternet Connection Server Ping period in seconds Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.6.3.1.2 |
cambiumToolBarStates OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6.3.2 |
cambiumToolbarGlobeStateGlobe Internet Connectivity Status Icon State: 0 - No Internet Connectivity, 1 - Internet Connectivity Device Allocation: AP, SMro Integer32 (0|1) .1.3.6.1.4.1.17713.21.6.3.2.1 |
cambiumToolbarGPSSyncStateGPS Current SYNC State: 0 - The Initialization State 1 - The No Synchronization State 2 - The Synchronization State 3 - The Hold Off State 4 - The Regaining Sync State 5 - The Free Run State Device Allocation: APro Integer32 .1.3.6.1.4.1.17713.21.6.3.2.2 |
cambiumToolbarDeviceConfigurationStateSystem configuration state OID. Bit masks: 0000 0001 - System is configured. 0000 0010 - There are unsaved changesets. 0000 0100 - There are unrestarted services. 0000 1000 - Needed reboot of the system. 0001 0000 - Configurations was reset. 0010 0000 - Services restarting in process. 0100 0000 - Software Update performed. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.3.2.3 |
cambiumToolbarSyncSourceSync Source Status: 1 - GPS Sync Up, 2 - GPS Sync Down, 3 - CMM4 Sync, 4 - CMM3 Sync Device Allocation: APro Integer32 (1|2|3|4) .1.3.6.1.4.1.17713.21.6.3.2.4 |
cambiumToolbarGPSSyncStateStrGPS Current SYNC State (text) Device Allocation: APro DisplayString .1.3.6.1.4.1.17713.21.6.3.2.5 |
cambiumCfg OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6.4 |
cambiumJSONCfgImportOID to start import process, when valid link to JSON configuration file is received. Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.6.4.1 |
cambiumJSONCfgImportStatusOID to get the status of the import process: -1 Error 0 Idle 1 Downloading file 2 Importing file 3 Rebooting Device Allocation: AP, SMro Integer32 (-1..3) .1.3.6.1.4.1.17713.21.6.4.2 |
cambiumJSONCfgImportErrorImport config Error message (text) Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.4.3 |
cambiumJSONCfgExportOID to start export process 0 No action 1 Start Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.6.4.10 |
cambiumJSONCfgExportStatusOID to get the status of the export process: -1 Error 0 Idle 1 Exporting JSON config 2 Moving config into upload directory 3 Preparing link for uploading 4 Success Device Allocation: AP, SMro Integer32 (-1..4) .1.3.6.1.4.1.17713.21.6.4.11 |
cambiumJSONCfgExportErrorExport config Error message (text) Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.4.12 |
cambiumJSONCfgExportLinkLink to the configuration file on the board Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.4.13 |
cambiumFullCfgRestoreOID to start restore process, when valid link to full configuration file is received. Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.6.4.20 |
cambiumFullCfgRestoreStatusOID to get the status of the restore process: -1 Error 0 Idle 1 Downloading file 2 Decrypting 3 Unpacking 4 Importing 5 Rebooting Device Allocation: AP, SMro Integer32 (-1..5) .1.3.6.1.4.1.17713.21.6.4.21 |
cambiumFullCfgRestoreErrorRestore config Error message (text) Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.4.22 |
cambiumFullCfgBackUpOID to start backup process Bitmask indicating which part of configuration to backup: 001 - json-config files 010 - files of security & certificates 100 - log files Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.6.4.30 |
cambiumFullCfgBackUpStatusOID to get the status of the backup process: -1 Error 0 Idle 1 Packing configuration files 2 Encrypting configuration files 3 Moving packed files into upload directory 4 Preparing link for uploading 5 Success Device Allocation: AP, SMro Integer32 (-1..5) .1.3.6.1.4.1.17713.21.6.4.31 |
cambiumFullCfgBackUpErrorBackup config Error message (text) Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.4.32 |
cambiumFullCfgBackUpLinkLink to the packed configuration files on the board, ready to upload Device Allocation: AP, SMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.17713.21.6.4.33 |
cambiumIDM OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6.5 |
cambiumIDMModeOID to configure IDM Mode 0 - System Wide 1 - Local Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.6.5.1 |
cambiumIDMTimeOID to configure IDM Time. Device Allocation: AP, SMrw Integer32 .1.3.6.1.4.1.17713.21.6.5.2 |
cambiumIDMEnableOID to enable/disable IDM feature 0 - Enable IDM 1 - Disable IDM Device Allocation: AP, SMrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.6.5.3 |
cambiumIDMResultsTableThis table contains information of IDM Results: IDM Cycle, Device MAC, Last Comb RSSI, Last Rate, Max Rate, Number of Packets, CRC Comb RSSI, CRC Ch0 RSSI, CRC Ch1 RSSI, CRC Number of Packets, PRQ Comb RSSI, PRQ Ch0 RSSI, PRQ Ch1 RSSI, PRQ Number of Packets, Device Allocation: AP, SM SEQUENCE OF CambiumIDMResultsEntry .1.3.6.1.4.1.17713.21.6.5.10 |
cambiumIDMResultsEntryWireless parameters mapping for particular device. Device Allocation: AP, SM CambiumIDMResultsEntry .1.3.6.1.4.1.17713.21.6.5.10.1 |
idmDeviceListCycleIDM Cycle Number. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.5.10.1.1 |
idmDeviceListMACMAC Address of device collected IDM Statistics. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.5.10.1.2 |
idmDeviceListLCombRSSICombined RSSI of last received MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.10.1.3 |
idmDeviceListLRateRate code of last received MPDU. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.5.10.1.4 |
idmDeviceListMaxRateMaximum rate code. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.5.10.1.5 |
idmDeviceListPcktsNumNumber of packets filtered by IDM. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.5.10.1.6 |
idmDeviceListCRCCombRSSICombined RSSI of maximum received CRC error MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.10.1.7 |
idmDeviceListCRCCh0RSSIChannel 0 RSSI of maximum received CRC error MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.10.1.8 |
idmDeviceListCRCCh1RSSIChannel 1 RSSI of maximum received CRC error MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.10.1.9 |
idmDeviceListCRCPcktsNumNumber of packets with CRC error filtered by IDM. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.5.10.1.10 |
idmDeviceListPRQCombRSSICombined RSSI of maximum received Probe Requests MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.10.1.11 |
idmDeviceListPRQCh0RSSIChannel 0 RSSI of maximum received Probe Requests MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.10.1.12 |
idmDeviceListPRQCh1RSSIChannel 1 RSSI of maximum received Probe Requests MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.10.1.13 |
idmDeviceListPRQPcktsNumNumber of Probe Requests filtered by IDM. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.5.10.1.14 |
cambiumIDMSumMACMAC Address of device collected IDM Summary Statistics. Device Allocation: AP, SMrw DisplayString .1.3.6.1.4.1.17713.21.6.5.11 |
cambiumIDMSumLCombRSSISummary Combined RSSI of last received MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.12 |
cambiumIDMSumLRateSummary Rate code of last received MPDU. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.5.13 |
cambiumIDMSumMaxRateSummary Maximum rate code. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.5.14 |
cambiumIDMSumPcktsNumSummary Number of packets filtered by IDM. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.5.15 |
cambiumIDMSumCRCCombRSSISummary Combined RSSI of maximum received CRC error MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.16 |
cambiumIDMSumCRCCh0RSSISummary Channel 0 RSSI of maximum received CRC error MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.17 |
cambiumIDMSumCRCCh1RSSISummary Channel 1 RSSI of maximum received CRC error MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.18 |
cambiumIDMSumCRCPcktsNumSummary Number of packets with CRC error filtered by IDM. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.5.19 |
cambiumIDMSumPRQCombRSSISummary Combined RSSI of maximum received Probe Requests MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.20 |
cambiumIDMSumPRQCh0RSSISummary Channel 0 RSSI of maximum received Probe Requests MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.21 |
cambiumIDMSumPRQCh1RSSISummary Channel 1 RSSI of maximum received Probe Requests MPDU. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.22 |
cambiumIDMSumPRQPcktsNumSummary Number of Probe Requests filtered by IDM. Device Allocation: AP, SMro Integer32 .1.3.6.1.4.1.17713.21.6.5.23 |
cambiumIDMSummaryTableThis table contains information of IDM Summary Top Interferers: Intrf MAC, Intrf RSSI, Intrf Ch0 RSSI, Intrf Ch1 RSSI, Intrf SSID, Device Allocation: AP, SM SEQUENCE OF CambiumIDMSummaryEntry .1.3.6.1.4.1.17713.21.6.5.30 |
cambiumIDMSummaryEntryWireless parameters mapping for particular device. Device Allocation: AP, SM CambiumIDMSummaryEntry .1.3.6.1.4.1.17713.21.6.5.30.1 |
idmSummaryIntMACMAC Address of Interferer. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.5.30.1.1 |
idmSummaryIntCombRSSIInterferer Combined RSSI. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.30.1.2 |
idmSummaryIntCh0RSSIInterferer Channel 0 RSSI. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.30.1.3 |
idmSummaryIntCh1RSSIInterferer Channel 1 RSSI. Device Allocation: AP, SMro Integer32(-128..127) .1.3.6.1.4.1.17713.21.6.5.30.1.4 |
idmSummaryIntSSIDSSID name of Interferer. Device Allocation: AP, SMro DisplayString .1.3.6.1.4.1.17713.21.6.5.30.1.5 |
cambiumACSCfg OBJECT IDENTIFIER .1.3.6.1.4.1.17713.21.6.6 |
acsEnableAutomatic Channel Selection (ACS) automatically selects best values for centerFrequency, dfsAlternative1CenterFrequency and dfsAlternative2CenterFrequency: 0 - Disable, 1 - Enable Device Allocation: APrw Integer32 (0|1) .1.3.6.1.4.1.17713.21.6.6.1 |
acsScanMinDwellTimeMinimum dwell time during Automatic Channel Selection (ACS) scan in milliseconds. Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.6.6.2 |
acsScanMaxDwellTimeMaximum dwell time during Automatic Channel Selection (ACS) scan in milliseconds. Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.6.6.3 |
acsControlAutomatic Channel Selection (ACS) control: 0 - No change, 1 - Run scan now, 2 - Abort current scan Device Allocation: APrw Integer32 .1.3.6.1.4.1.17713.21.6.6.4 |