HUAWEI-OSPFV3-MIB
AI MIB Summary
The HUAWEI-OSPFV3-MIB module enables monitoring and management of OSPFv3 routing instances on Huawei network devices, exposing critical metrics such as neighbor adjacency states, interface link costs, LSA flooding statistics, and protocol error counters.
The MIB module for OSPF version 3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC draft-ietf-ospf-ospfv3-mib-11; see the RFC itself for full legal notices.
Main OID:
hwOspfv3.1.3.6.1.4.1.2011.5.25.147
182
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
182 total| Object Name |
|---|
hwOspfv3The MIB module for OSPF version 3.
Copyright (C) The Internet Society (2006).
This version of this MIB module is part of
RFC draft-ietf-ospf-ospfv3-mib-11;
see the RFC itself for full legal
notices. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.147 |
hwOspfv3Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.147.0 |
hwOspfv3VirtIfStateChangeAn ospfv3VirtIfStateChange notification signifies that there
has been a change in the state of an OSPFv3 virtual
interface.
This notification should be generated when the interface
state regresses (e.g., goes from Point-to-Point to Down)
or progresses to a terminal state (i.e., Point-to-Point). NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.1 |
hwOspfv3NbrStateChangeAn ospfv3NbrStateChange notification signifies that
there has been a change in the state of a
non-virtual OSPFv3 neighbor. This notification should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the notification should be
generated by the designated router. A designated
router transitioning to Down will be noted by
ospfIfStateChange. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.2 |
hwOspfv3VirtNbrStateChangeAn ospfv3VirtNbrStateChange notification signifies
that there has been a change in the state of an OSPFv3
virtual neighbor. This notification should be generated
when the neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or Down) or
progresses to a terminal state (e.g., Full). NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.3 |
hwOspfv3IfConfigErrorAn ospfv3IfConfigError notification signifies that a
packet has been received on a non-virtual
interface from a router whose configuration
parameters conflict with this router's
configuration parameters. Note that the event
optionMismatch should cause a notification only if it
prevents an adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.4 |
hwOspfv3VirtIfConfigErrorAn ospfv3VirtIfConfigError notification signifies that a
packet has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a notification only if it prevents an
adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.5 |
hwOspfv3IfRxBadPacketAn ospfv3IfRxBadPacket notification signifies that an
OSPFv3 packet that cannot be parsed has been received on a
non-virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.6 |
hwOspfv3VirtIfRxBadPacketAn ospfv3VirtIfRxBadPacket notification signifies
that an OSPFv3 packet that cannot be parsed has been received
on a virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.7 |
hwOspfv3IfStateChangeAn ospfv3IfStateChange notification signifies that there
has been a change in the state of a non-virtual
OSPFv3 interface. This notification should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup). NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.8 |
hwOspfv3RestartStatusChangeAn ospfv3RestartStatusChange notification signifies that
there has been a change in the graceful restart
state for the router. This notification should be
generated when the router restart status
changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.9 |
hwOspfv3NbrRestartHelperStatusChangeAn ospfv3NbrRestartHelperStatusChange notification
signifies that there has been a change in the
graceful restart helper state for the neighbor.
This notification should be generated when the
neighbor restart helper status transitions for a neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.10 |
hwOspfv3VirtNbrRestartHelperStatusChangeAn ospfv3VirtNbrRestartHelperStatusChange
notification signifies that there has been a
change in the graceful restart helper state for
the virtual neighbor. This notification should be
generated when the virtual neighbor restart helper status
transitions for a virtual neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.11 |
hwOspfv3NssaTranslatorStatusChangeAn ospfv3NssaTranslatorStatusChange notification
indicates that there has been a change in the router's ability
to translate OSPFv3 NSSA LSAs into OSPFv3 External LSAs.
This notification should be generated when the Translator Status
transitions from or to any defined status on a per area basis. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.12 |
hwOspfv3LastAuthKeyExpiryAn hwOspfv3LastAuthKeyExpiry notification
indicates that the last key associated with an interface has expired.
When this notification is received, either the lifetime of the key should be extended
or a new key should be configured. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.13 |
hwOspfv3AuthSequenceNumWrapAn hwOspfv3AuthSequenceNumWrap notification
indicates that the 64-bit authentication sequence number has wrapped.
When this notification is received, all the keys must be reset
to avoid the possibility of replay attacks. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.147.0.14 |
hwOspfv3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.147.1 |
hwOspfv3GeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.147.1.1 |
hwOspfv3RouterIdA 32-bit integer uniquely identifying the
router in the Autonomous System. To ensure
uniqueness, this may default to the value of
one of the router's IPv4 host addresses,
represented as a 32-bit unsigned integer,
if IPv4 is configured on the router.rw HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.1.1 |
hwOspfv3AdminStatusThe administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all
interfaces.rw Status (OSPF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.1.2 |
hwOspfv3VersionNumberThe version number of OSPF for IPv6 is 3.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.1.3 |
hwOspfv3AreaBdrRtrStatusA flag to note whether this router is an area
border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.1.4 |
hwOspfv3AsBdrRtrStatusA flag to note whether this router is
configured as an Autonomous System border router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.1.5 |
hwOspfv3AsScopeLsaCountThe number of AS-Scope (e.g. AS-External) link state
advertisements in the link state database.ro Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.1.6 |
hwOspfv3AsScopeLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the AS-scoped link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link state database of two
routers.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.147.1.1.7 |
hwOspfv3OriginateNewLsasThe number of new link-state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.ro Counter32 .1.3.6.1.4.1.2011.5.25.147.1.1.8 |
hwOspfv3RxNewLsasThe number of link state advertisements
received determined to be new instantiations.
This number does not include newer
instantiations of self-originated link state
advertisements.ro Counter32 .1.3.6.1.4.1.2011.5.25.147.1.1.9 |
hwOspfv3ExtLsaCountThe number of AS-Scope External(LS type 0x4005) link state
advertisements in the link state databasero Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.1.10 |
hwOspfv3ExtAreaLsdbLimitThe maximum number of non-default
AS-external-LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow
state. The router never holds more than
ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. Ospfv3ExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded).rw Integer32 (-1..'7FFFFFFF'h) .1.3.6.1.4.1.2011.5.25.147.1.1.11 |
hwOspfv3RestartSupportThe router's support for OSPFv3 Graceful restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts.rw Enumeration .1.3.6.1.4.1.2011.5.25.147.1.1.12 |
hwOspfv3RestartIntervalConfigured OSPFv3 Graceful restart timeout interval.rw HWOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.1.13 |
hwOspfv3RestartStatusThe current status of OSPFv3 Graceful restart capability.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.1.14 |
hwOspfv3RestartAgeRemaining time in current OSPFv3 Graceful restart
interval.ro HWOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.1.15 |
hwOspfv3RestartExitRcDescribes the outcome of the last attempt at a
Graceful restart.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.1.16 |
hwOspfv3NotificationEnableIf this object is set to true(1), then it enables
the generation of OSPFv3 Notifications. If it is
set to false(2), these notifications are not
generated.
Configured values MUST survive an agent reboot.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.1.17 |
hwOspfv3ReferenceBandwidthReference bandwidth in kilobits per second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS).
This object is persistent, and when written, the
entity SHOULD save the change to non-volatile
storage.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.147.1.1.18 |
hwOspfv3AreaTableInformation describing the configured
parameters and cumulative statistics of the router's
attached areas. SEQUENCE OF HwOspfv3AreaEntry .1.3.6.1.4.1.2011.5.25.147.1.2 |
hwOspfv3AreaEntryInformation describing the configured
parameters and cumulative statistics of one of the
router's attached areas. HwOspfv3AreaEntry .1.3.6.1.4.1.2011.5.25.147.1.2.1 |
hwOspfv3AreaIdA 32-bit integer uniquely identifying an area.
Area ID 0 is used for the OSPFv3 backbone. HWOspfv3AreaIdTc .1.3.6.1.4.1.2011.5.25.147.1.2.1.1 |
hwOspfv3AreaImportAsExternIndicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as NSSA
LSAs which have Area-scoperw Enumeration .1.3.6.1.4.1.2011.5.25.147.1.2.1.2 |
hwOspfv3AreaSpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link state database. This is typically done
using Dijkstra's algorithm.ro Counter32 .1.3.6.1.4.1.2011.5.25.147.1.2.1.3 |
hwOspfv3AreaBdrRtrCountThe total number of area border routers
reachable within this area. This is initially zero,
and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.2.1.4 |
hwOspfv3AreaAsBdrRtrCountThe total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.ro Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.2.1.5 |
hwOspfv3AreaScopeLsaCountThe total number of Area-Scope link state
advertisements in this area's link state
database.ro Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.2.1.6 |
hwOspfv3AreaScopeLsaCksumSumThe 32-bit unsigned sum of the Area-Scope link state
advertisements' LS checksums contained in this
area's link state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.147.1.2.1.7 |
hwOspfv3AreaSummaryThe variable ospfv3AreaSummary controls the
import of Inter-Area LSAs into stub and
NSSA areas. It has no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate Inter-Area LSAs into the
stub or NSSA area. It will rely entirely on its
default route.
If it is sendAreaSummary, the router will both
summarize and propagate Inter-Area LSAs.rw Enumeration .1.3.6.1.4.1.2011.5.25.147.1.2.1.8 |
hwOspfv3AreaRowStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.2.1.9 |
hwOspfv3AreaStubMetricThe metric value advertised for the default route
into Stub and NSSA areas.rw BigMetric (OSPF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.2.1.10 |
hwOspfv3AreaNssaTranslatorRoleIndicates an NSSA border router's policy to
perform NSSA translation of NSSA-LSAs into
AS-External-LSAs.rw Enumeration .1.3.6.1.4.1.2011.5.25.147.1.2.1.11 |
hwOspfv3AreaNssaTranslatorStateIndicates if and how an NSSA border router is
performing NSSA translation of NSSA-LSAs into
AS-External-LSAs. When this object is set to
'enabled', the NSSA border router's
ospfv3AreaNssaTranslatorRole has been set to 'always'.
When this object is set to 'elected', a candidate
NSSA border router is translating NSSA-LSAs into
AS-External-LSAs. When this object is set to
'disabled', a candidate NSSA Border router is NOT
translating NSSA-LSAs into AS-External-LSAs.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.2.1.12 |
hwOspfv3AreaNssaTranslatorStabIntervalThe stability interval defined as the number of
seconds after an elected translator determines its
services are no longer required that it should
continue to perform its translation duties.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.147.1.2.1.13 |
hwOspfv3AreaNssaTranslatorEventsIndicates the number of Translator state changes
that have occurred since the last start-up of the
OSPFv3 routing process.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2011.5.25.147.1.2.1.14 |
hwOspfv3AsLsdbTableThe OSPFv3 Process's AS-Scope Link State Database. SEQUENCE OF HwOspfv3AsLsdbEntry .1.3.6.1.4.1.2011.5.25.147.1.3 |
hwOspfv3AsLsdbEntryA single AS-Scope Link State Advertisement. HwOspfv3AsLsdbEntry .1.3.6.1.4.1.2011.5.25.147.1.3.1 |
hwOspfv3AsLsdbTypeThe type of the link state advertisement.
Each link state type has a separate
advertisement format. AS-Scope LSAs not recognized
by the router may be stored in the database. Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.2011.5.25.147.1.3.1.1 |
hwOspfv3AsLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System. HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.3.1.2 |
hwOspfv3AsLsdbLsIdThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics. Unsigned32 .1.3.6.1.4.1.2011.5.25.147.1.3.1.3 |
hwOspfv3AsLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro HWOspfv3LsaSequenceTC .1.3.6.1.4.1.2011.5.25.147.1.3.1.4 |
hwOspfv3AsLsdbAgeThis field is the age of the link state
advertisement in seconds.ro HWOspfv3LsaAgeTC -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.3.1.5 |
hwOspfv3AsLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly
referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.2011.5.25.147.1.3.1.6 |
hwOspfv3AsLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.147.1.3.1.7 |
hwOspfv3AsLsdbTypeKnownIndicates whether the LSA type is recognized by
this Router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.3.1.8 |
hwOspfv3AreaLsdbTableThe OSPFv3 Process's Area-Scope Link State Database. SEQUENCE OF HwOspfv3AreaLsdbEntry .1.3.6.1.4.1.2011.5.25.147.1.4 |
hwOspfv3AreaLsdbEntryA single Area-Scope Link State Advertisement. HwOspfv3AreaLsdbEntry .1.3.6.1.4.1.2011.5.25.147.1.4.1 |
hwOspfv3AreaLsdbAreaIdThe 32-bit identifier of the Area from which the
LSA was received. HWOspfv3AreaIdTc .1.3.6.1.4.1.2011.5.25.147.1.4.1.1 |
hwOspfv3AreaLsdbTypeThe type of the link state advertisement.
Each link state type has a separate
advertisement format. Area-Scope LSAs unrecognized
by the router are also stored in this database. Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.2011.5.25.147.1.4.1.2 |
hwOspfv3AreaLsdbRouterIdThe 32-bit number that uniquely identifies the
originating router in the Autonomous System. HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.4.1.3 |
hwOspfv3AreaLsdbLsIdThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics. Unsigned32 .1.3.6.1.4.1.2011.5.25.147.1.4.1.4 |
hwOspfv3AreaLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and
duplicate link state advertisements. The space
of sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro HWOspfv3LsaSequenceTC .1.3.6.1.4.1.2011.5.25.147.1.4.1.5 |
hwOspfv3AreaLsdbAgeThis field is the age of the link state
advertisement in seconds.ro HWOspfv3LsaAgeTC -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.4.1.6 |
hwOspfv3AreaLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly
referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.2011.5.25.147.1.4.1.7 |
hwOspfv3AreaLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.147.1.4.1.8 |
hwOspfv3AreaLsdbTypeKnownIndicates whether the LSA type is recognized
by this Router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.4.1.9 |
hwOspfv3LinkLsdbTableThe OSPFv3 Process's Link-Scope Link State Database. SEQUENCE OF HwOspfv3LinkLsdbEntry .1.3.6.1.4.1.2011.5.25.147.1.5 |
hwOspfv3LinkLsdbEntryA single Link-Scope Link State Advertisement. HwOspfv3LinkLsdbEntry .1.3.6.1.4.1.2011.5.25.147.1.5.1 |
hwOspfv3LinkLsdbIfIndexThe identifier of the link from which the LSA
was received. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.5.1.1 |
hwOspfv3LinkLsdbIfInstIdThe identifier of the interface instance from
which the LSA was received. HWOspfv3IfInstIdTc .1.3.6.1.4.1.2011.5.25.147.1.5.1.2 |
hwOspfv3LinkLsdbTypeThe type of the link state advertisement.
Each link state type has a separate
advertisement format. Link-Scope LSAs unrecognized
by the router are also stored in this database. Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.2011.5.25.147.1.5.1.3 |
hwOspfv3LinkLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System. HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.5.1.4 |
hwOspfv3LinkLsdbLsIdThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics. HWOspfv3LsIdTC .1.3.6.1.4.1.2011.5.25.147.1.5.1.5 |
hwOspfv3LinkLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro HWOspfv3LsaSequenceTC .1.3.6.1.4.1.2011.5.25.147.1.5.1.6 |
hwOspfv3LinkLsdbAgeThis field is the age of the link state
advertisement in seconds.ro HWOspfv3LsaAgeTC -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.5.1.7 |
hwOspfv3LinkLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly
referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.2011.5.25.147.1.5.1.8 |
hwOspfv3LinkLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.147.1.5.1.9 |
hwOspfv3LinkLsdbTypeKnownIndicates whether the LSA type is recognized by this
Router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.5.1.10 |
hwOspfv3IfTableThe OSPFv3 Interface Table describes the
interfaces from the viewpoint of OSPFv3. SEQUENCE OF HwOspfv3IfEntry .1.3.6.1.4.1.2011.5.25.147.1.6 |
hwOspfv3IfEntryThe OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3. HwOspfv3IfEntry .1.3.6.1.4.1.2011.5.25.147.1.6.1 |
hwOspfv3IfIndexThe interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.6.1.1 |
hwOspfv3IfInstIdEnables multiple interface instances of OSPFv3
to be run over a single link. Each protocol
instance would be assigned a separate ID. This ID
has local link significance only. HWOspfv3IfInstIdTc .1.3.6.1.4.1.2011.5.25.147.1.6.1.2 |
hwOspfv3IfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0 is used for the OSPFv3 backbone.rw HWOspfv3AreaIdTc .1.3.6.1.4.1.2011.5.25.147.1.6.1.3 |
hwOspfv3IfTypeThe OSPFv3 interface type.rw Enumeration .1.3.6.1.4.1.2011.5.25.147.1.6.1.4 |
hwOspfv3IfAdminStatusThe OSPFv3 interface's administrative status.
The value formed on the interface, and the
interface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPFv3.rw Status (OSPF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.6.1.5 |
hwOspfv3IfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not
eligible to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker.rw DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.6.1.6 |
hwOspfv3IfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.rw HWOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.6.1.7 |
hwOspfv3IfRetransIntervalThe number of seconds between link state
advertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and link state request packets.rw HWOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.6.1.8 |
hwOspfv3IfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network.rw HWHelloRange UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.6.1.9 |
hwOspfv3IfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down on the interface.
This should be some multiple of the Hello interval.
This value must be the same for all routers attached
to a common network.rw HWOspfv3DeadIntRangeTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.6.1.10 |
hwOspfv3IfStateThe OSPFv3 Interface State.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.6.1.11 |
hwOspfv3IfDesignatedRouterThe Router ID of the Designated Router.ro HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.6.1.12 |
hwOspfv3IfBackupDesignatedRouterThe Router ID of the Backup Designated
Router.ro HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.6.1.13 |
hwOspfv3IfEventsThe number of times this OSPFv3 interface has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.2011.5.25.147.1.6.1.14 |
hwOspfv3IfRowStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.6.1.15 |
hwOspfv3IfMetricValueThe metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value
of the reference bandwidth is configured
by the ospfv3ReferenceBandwidth object.rw Metric (OSPF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.6.1.16 |
hwOspfv3IfLinkScopeLsaCountThe total number of Link-Scope link state
advertisements in this link's link state
database.ro Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.6.1.17 |
hwOspfv3IfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link state
advertisements' LS checksums contained in this
link's link state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link state database of two routers.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.147.1.6.1.18 |
hwOspfv3IfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive
non-broadcast multi-access neighbor.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.6.1.19 |
hwOspfv3IfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link
unicasts. Data link multicasting is not
meaningful on point to point and NBMA interfaces,
and setting ospfv3MulticastForwarding to 0
effectively disables all multicast forwarding.rw Enumeration .1.3.6.1.4.1.2011.5.25.147.1.6.1.20 |
hwOspfv3VirtIfTableInformation about this router's virtual
interfaces. SEQUENCE OF HwOspfv3VirtIfEntry .1.3.6.1.4.1.2011.5.25.147.1.7 |
hwOspfv3VirtIfEntryInformation about a single Virtual Interface. HwOspfv3VirtIfEntry .1.3.6.1.4.1.2011.5.25.147.1.7.1 |
hwOspfv3VirtIfAreaIdThe Transit Area that the Virtual Link
traverses. By definition, this is not
Area 0 HWOspfv3AreaIdTc .1.3.6.1.4.1.2011.5.25.147.1.7.1.1 |
hwOspfv3VirtIfNeighborThe Router ID of the Virtual Neighbor. HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.7.1.2 |
hwOspfv3VirtIfIndexThe local interface index assigned to this
OSPFv3 virtual interface. It is advertised in
Hello's sent over the virtual link and in the
router's router-LSAs.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.7.1.3 |
hwOspfv3VirtIfInstIdSpecifies the interface instance ID to be used
for the virtual interface. This ID has local link
significance only.ro HWOspfv3IfInstIdTc .1.3.6.1.4.1.2011.5.25.147.1.7.1.4 |
hwOspfv3VirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.rw HWOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.7.1.5 |
hwOspfv3VirtIfRetransIntervalThe number of seconds between link state
advertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and link state request packets. This
value should be well over the expected
round-trip time.rw HWOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.7.1.6 |
hwOspfv3VirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor.rw HelloRange UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.7.1.7 |
hwOspfv3VirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for the virtual
neighbor.rw HWOspfv3DeadIntRangeTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.7.1.8 |
hwOspfv3VirtIfStateOSPFv3 virtual interface states. The same encoding
as the hwOspfv3IfTable is used.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.7.1.9 |
hwOspfv3VirtIfEventsThe number of state changes or error events on
this Virtual Linkro Counter32 .1.3.6.1.4.1.2011.5.25.147.1.7.1.10 |
hwOspfv3VirtIfRowStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.7.1.11 |
hwOspfv3VirtIfLinkScopeLsaCountThe total number of Link-Scope link state
advertisements in this virtual link's link state
database.ro Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.7.1.12 |
hwOspfv3VirtIfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link state database of two routers.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.147.1.7.1.13 |
hwOspfv3NbrTableA table of non-virtual neighbor information. SEQUENCE OF HwOspfv3NbrEntry .1.3.6.1.4.1.2011.5.25.147.1.8 |
hwOspfv3NbrEntryThe information regarding a single neighbor. HwOspfv3NbrEntry .1.3.6.1.4.1.2011.5.25.147.1.8.1 |
hwOspfv3NbrIfIndexThe local link ID of the link over which the
neighbor can be reached. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.8.1.1 |
hwOspfv3NbrIfInstIdInterface instance over which the neighbor
can be reached. This ID has local link
significance only. HWOspfv3IfInstIdTc .1.3.6.1.4.1.2011.5.25.147.1.8.1.2 |
hwOspfv3NbrRtrIdA 32-bit integer uniquely identifying the neighboring
router in the Autonomous System. HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.8.1.3 |
hwOspfv3NbrAddressTypeThe address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.147.1.8.1.4 |
hwOspfv3NbrAddressThe IPv6 address of the neighbor associated with
the local link.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.147.1.8.1.5 |
hwOspfv3NbrOptionsA Bit Mask corresponding to the neighbor's
options field.ro Integer32 .1.3.6.1.4.1.2011.5.25.147.1.8.1.6 |
hwOspfv3NbrPriorityThe priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become the
designated router on this particular network.ro DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.8.1.7 |
hwOspfv3NbrStateThe State of the relationship with this
Neighbor.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.8.1.8 |
hwOspfv3NbrEventsThe number of times this neighbor relationship
has changed state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.2011.5.25.147.1.8.1.9 |
hwOspfv3NbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.8.1.10 |
hwOspfv3NbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.8.1.11 |
hwOspfv3NbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the
neighbor's local interface index.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.8.1.12 |
hwOspfv3NbrRestartHelperStatusIndicates whether the router is acting
as a Graceful restart helper for the neighbor.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.8.1.13 |
hwOspfv3NbrRestartHelperAgeRemaining time in current OSPFv3 Graceful restart
interval, if the router is acting as a restart
helper for the neighbor.ro HWOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.8.1.14 |
hwOspfv3NbrRestartHelperExitRcDescribes the outcome of the last attempt at acting
as a Graceful restart helper for the neighbor.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.8.1.15 |
hwOspfv3CfgNbrTableA table of configured, non-virtual neighbor
information. SEQUENCE OF HwOspfv3CfgNbrEntry .1.3.6.1.4.1.2011.5.25.147.1.9 |
hwOspfv3CfgNbrEntryThe information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery. HwOspfv3CfgNbrEntry .1.3.6.1.4.1.2011.5.25.147.1.9.1 |
hwOspfv3CfgNbrIfIndexThe local link ID of the link over which the
neighbor can be reached. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.9.1.1 |
hwOspfv3CfgNbrIfInstIdInterface instance over which the neighbor
can be reached. This ID has local link
significance only. HWOspfv3IfInstIdTc .1.3.6.1.4.1.2011.5.25.147.1.9.1.2 |
hwOspfv3CfgNbrRtrIdA 32-bit integer uniquely identifying the static neighbor
router in the Autonomous System. HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.9.1.3 |
hwOspfv3CfgNbrPriorityThe priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become the
designated router on this particular network.rw DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.9.1.4 |
hwOspfv3CfgNbrRowStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.9.1.5 |
hwOspfv3VirtNbrTableA table of virtual neighbor information. SEQUENCE OF HwOspfv3VirtNbrEntry .1.3.6.1.4.1.2011.5.25.147.1.10 |
hwOspfv3VirtNbrEntryVirtual neighbor information. HwOspfv3VirtNbrEntry .1.3.6.1.4.1.2011.5.25.147.1.10.1 |
hwOspfv3VirtNbrAreaThe Transit Area Identifier. HWOspfv3AreaIdTc .1.3.6.1.4.1.2011.5.25.147.1.10.1.1 |
hwOspfv3VirtNbrRtrIdA 32-bit integer uniquely identifying the
neighboring router in the Autonomous System. HWOspfv3RouterIdTc .1.3.6.1.4.1.2011.5.25.147.1.10.1.2 |
hwOspfv3VirtNbrIfIndexThe local interface ID for the virtual link over
which the neighbor can be reached.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.10.1.3 |
hwOspfv3VirtNbrIfInstIdThe interface instance for the virtual link over
which the neighbor can be reached.ro HWOspfv3IfInstIdTc .1.3.6.1.4.1.2011.5.25.147.1.10.1.4 |
hwOspfv3VirtNbrAddressTypeThe address type of ospfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.147.1.10.1.5 |
hwOspfv3VirtNbrAddressThe IPv6 address advertised by this Virtual Neighbor.
It must be a Global scope address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.147.1.10.1.6 |
hwOspfv3VirtNbrOptionsA Bit Mask corresponding to the neighbor's options
field.ro Integer32 .1.3.6.1.4.1.2011.5.25.147.1.10.1.7 |
hwOspfv3VirtNbrStateThe state of the Virtual Neighbor Relationship.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.10.1.8 |
hwOspfv3VirtNbrEventsThe number of times this virtual link has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.2011.5.25.147.1.10.1.9 |
hwOspfv3VirtNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.2011.5.25.147.1.10.1.10 |
hwOspfv3VirtNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.10.1.11 |
hwOspfv3VirtNbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface ID.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.147.1.10.1.12 |
hwOspfv3VirtNbrRestartHelperStatusIndicates whether the router is acting
as a Graceful restart helper for the neighbor.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.10.1.13 |
hwOspfv3VirtNbrRestartHelperAgeRemaining time in current OSPFv3 Graceful restart
interval, if the router is acting as a restart
helper for the neighbor.ro HWOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2011.5.25.147.1.10.1.14 |
hwOspfv3VirtNbrRestartHelperExitRcDescribes the outcome of the last attempt at acting
as a Graceful restart helper for the neighbor.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.10.1.15 |
hwOspfv3AreaAggregateTableA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range
subsumes another range the most specific
match is the preferred one. SEQUENCE OF HwOspfv3AreaAggregateEntry .1.3.6.1.4.1.2011.5.25.147.1.11 |
hwOspfv3AreaAggregateEntryA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range
subsumes another range the most specific match is
the preferred one. HwOspfv3AreaAggregateEntry .1.3.6.1.4.1.2011.5.25.147.1.11.1 |
hwOspfv3AreaAggregateAreaIdThe Area the Address Aggregate is to be found
within. HWOspfv3AreaIdTc .1.3.6.1.4.1.2011.5.25.147.1.11.1.1 |
hwOspfv3AreaAggregateAreaLsdbTypeThe type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address
Aggregate applies to. Enumeration .1.3.6.1.4.1.2011.5.25.147.1.11.1.2 |
hwOspfv3AreaAggregatePrefixTypeThe prefix type of ospfv3AreaAggregatePrefix. Only
IPv6 addresses are expected. InetAddressType --{ ipv6(2) } .1.3.6.1.4.1.2011.5.25.147.1.11.1.4 |
hwOspfv3AreaAggregatePrefixThe IPv6 Prefix. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.147.1.11.1.5 |
hwOspfv3AreaAggregatePrefixLengthThe length of the prefix (in bits). A prefix can
not be shorter than 0 bits. InetAddressPrefixLength .1.3.6.1.4.1.2011.5.25.147.1.11.1.6 |
hwOspfv3AreaAggregateRowStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.147.1.11.1.7 |
hwOspfv3AreaAggregateEffectPrefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate
(advertiseMatching), or result in the prefix not
being advertised at all outside the area.rw Enumeration .1.3.6.1.4.1.2011.5.25.147.1.11.1.8 |
hwOspfv3NotificationEntry OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.147.1.12 |
hwOspfv3ConfigErrorTypePotential types of configuration conflicts.
Used by the ospfv3ConfigError and
ospfv3ConfigVirtError notifications. When the last value
of a notification using this object is needed, but no
notifications of that type have been sent, this value
pertaining to this object should be returned as
noErrorro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.12.1 |
hwOspfv3PacketTypeOSPFv3 packet types. When the last value of a notification
using this object is needed, but no notifications of
that type have been sent, the value pertaining
to this object should be returned as nullPacketro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.12.2 |
hwOspfv3PacketSrcThe IPv6 address of an inbound packet that cannot
be identified by a neighbor instance. When
the last value of a notification using this object is
needed, but no notifications of that type have been sent,
the value pertaining to this object should
be returned as 0.
Only IPv6 addresses without zone index are expected.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.147.1.12.3 |
hwOspfv3IfNameThe interface namero OCTET STRING .1.3.6.1.4.1.2011.5.25.147.1.12.4 |
hwOspfv3IfStateChgReasonInterface state change reason.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.12.5 |
hwOspfv3NbrStateChgReasonNeighbor state change reason.ro Enumeration .1.3.6.1.4.1.2011.5.25.147.1.12.6 |
hwOspfv3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.147.2 |
hwOspfv3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.147.2.1 |
hwOspfv3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.147.2.2 |