Home/Catalog/HUAWEI-L2VLAN-MIB

HUAWEI-L2VLAN-MIB

AI MIB Summary

The HUAWEI-L2VLAN-MIB module enables SNMP-based monitoring and configuration of Layer 2 VLAN interfaces, port states, and VLAN membership tables on Huawei network switches. It facilitates the retrieval of operational metrics such as VLAN IDs, port-based VLAN assignments, and bridge port statistics for network topology management.

The L2Vlan MIB module is defined to manage several layer two function of Huawei Technologies co.,Ltd.
Main OID:
hwL2Vlan.1.3.6.1.4.1.2011.5.25.42.3
437
Objects
Active
Status
8
Dependencies

Imported Objects

SNMPv2-TC
SNMPv2-SMI
SNMPv2-CONF
HUAWEI-MIB
Q-BRIDGE-MIB
IF-MIB
P-BRIDGE-MIB
HUAWEI-BASE-TRAP-MIB

Objects

437 total
Object Name
hwL2Mgmt
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42
hwL2VlanThe L2Vlan MIB module is defined to manage several layer two function of Huawei Technologies co.,Ltd.
MODULE-IDENTITY
.1.3.6.1.4.1.2011.5.25.42.3
hwL2VlanMngObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.1
hwL2VlanBase
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.1.1
hwL2VlanMIBTableThe table contains basic information for this vlan.
SEQUENCE OF HwL2VlanMIBEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1
hwL2VlanMIBEntryEntries of vlan MIB table.
HwL2VlanMIBEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1
hwL2VlanIndexThe vlan-id or other identifier referring to this vlan.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.1
hwL2VlanDescrDescription of the vlan.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.2
hwL2VlanPortListThe set of Ports which belong to the vlan.rw
PortList (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.3
hwL2VlanTypeChange the value from '2' to '1' indicates that the common-vlan is configured into super-vlan; Change the value from '1' to '2' indicates that the super-vlan is canceled; Change the value from '2' to '4' indicates that the common-vlan is configured into mux-vlan; Change the value from '4' to '2' indicates that the mux-vlan is canceled; Change the value from '2' to '6' indicates that the common-vlan is configured into protocol-transparent-vlan; Change the value from '6' to '2' indicates that the protocol-transparent-vlan is canceled; Note that the switch between other pairs is forbidden.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.4
hwL2VlanUnknownUnicastProcessingWhether to broadcast the unknown unicast packets when ports receive it. broadcast(1) indicates broadcast the packets, discard(2) indicates it's closed. Default value is broadcast(1).rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.5
hwL2VlanIfIndexWhether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is InterfaceIndex, else the value is -1.ro
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.6
hwL2VlanMacLearnThe value indicates whether the MAC address learning is opened. The value enabled(1) indicates learning is allowed. Just the common vlan and Sub-vlan have the attribute. Default value is enabled(1).rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.7
hwL2VlanMulticastThe value enabled(1) indicates vlan Multicasting is allowed; disable(2) indicates it's closed. The default value is disable(2).ro
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.8
hwL2VlanAdminStatusValue disable(2) indicates shutdown the vlan; enabled(1) indicates open the vlan.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.9
hwL2VlanStatisStatusThe value enabled(1) indicates Statistics on vlan are allowed; disable(2) indicates aren't. The default value is disable(2).rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.10
hwL2VlanCreateStatusThe status indicates how the vlan is created, static configured by management or created dynamicly by GVRP.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.11
hwL2VlanRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.12
hwL2VlanBcastWhether to broadcast the broadcast packets when ports receive it. enabled(1) indicates broadcast the packets,disable(2) indicates it'll discard the broadcast packet. Default value is enabled(1).rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.13
hwL2VlanUnknownMulticastProcessingWhether to broadcast the unknown multicast packets when ports receive it. broadcast(1) indicates broadcast the packet, discard(2) indicates it'll discard the unknow multicast packet. Default value is broadcast(1).rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.14
hwL2VlanPropertyThe Property of Vlan: backboneVlan(2) used by PBT application, mutilcastVlan(3) used by Mutilcast Vlan, userVlan(4) used by users' vlan, and Default(1) means no special apply.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.15
hwL2VlanAgingTimeThe aging time of MAC entry that associated with the vlan.'0' means will be never aged,'-1' means aging-time is not configured to the vlan.rw
Integer32(60..1000000 | 0 | -1)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.16
hwL2VlanNameName of the vlan.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.17
hwL2VlanSmartMacLearnThe value indicates whether the MAC address learning is opened, when the number of the port which is up state and belonging to the vlan is below and equal to two. The value enabled(1) indicates learning is not allowed, when the number of the port which is up state and belonging to the vlan is below and equal to two. Just the common vlan and Sub-vlan have the attribute. Default value is disable(2).rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.18
hwL2VlanServiceNameService name of the vlan.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.19
hwL2VlanManagementVlanIf the VLAN is management VLAN.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.20
hwL2VlanDynamicVlanIf the VLAN is dynamic VLAN.ro
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.21
hwL2VlanApply
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.1.2
hwL2VlanStackingTableQinQ-port configuration table.
SEQUENCE OF HwL2VlanStackingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.1
hwL2VlanStackingEntryQinQ-port configuration table.
HwL2VlanStackingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1
hwL2VlanStackingPortIndexIndex number of QinQ-port.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.1
hwL2VlanStackingInsideVlanIdInside vlan-id of QinQ-port, use it as the Index.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.2
hwL2VlanStackingOutsideVlanListLowThe possible value of the outside vlan-id list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.3
hwL2VlanStackingOutsideVlanListHighThe possible value of the outside vlan-id list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.4
hwL2VlanStackingRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.5
hwL2VlanMappingTableConfiguration table.
SEQUENCE OF HwL2VlanMappingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.2
hwL2VlanMappingEntryQinQ-port configuration table.
HwL2VlanMappingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1
hwL2VlanMappingPortIndexIndex number of QinQ-port.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.1
hwL2VlanMappingInsideVlanIdInside vlan-id of QinQ-port ,use it as the Index.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.2
hwL2VlanMappingOutsideVlanListLowThe possible value of the outside vlan-id list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.3
hwL2VlanMappingOutsideVlanListHighThe possible value of the outside vlan-id list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.4
hwL2VlanMappingRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.5
hwSuperVlanTableThe table contains configuration and control information for the super vlan.
SEQUENCE OF HwSuperVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.3
hwSuperVlanEntryEntries of the super vlan table.
HwSuperVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1
hwSuperVlanIdThe super vlan-id.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.1
hwSubVlanListLowThe lowest possible value of the sub vlan list on the supervlan.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.2
hwSubVlanListHighThe highest possible value of the sub vlan list on the supervlan.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.3
hwL2InterfIsolateTableThe table contains configuration and control information for interfaces isolate.
SEQUENCE OF HwL2InterfIsolateEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.4
hwL2InterfIsolateEntrySecondary vlan lists of Isolate-vlans.
HwL2InterfIsolateEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1
hwL2InterfIsolateVlanIdvlan-id. The vlan into which interf-isolate is configured.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.1
hwL2InterfIsolateInterflistLowThe lowest possible value of Interface list on the vlan.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.2
hwL2InterfIsolateInterflistHighThe highest possible value of Interface list on the vlan.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.3
hwL2IsolatemappingTableThe table contains mapping information between isolated ports.
SEQUENCE OF HwL2IsolatemappingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.5
hwL2IsolatemappingEntry
HwL2IsolatemappingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1
hwL2IsolatemappingPortNumPort number.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.1
hwL2IsolateInterflistLowThe lowest possible value of Interface list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.2
hwL2IsolateInterflistHighThe highest possible value of Interface.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.3
hwL2VlanStackingExtTable
SEQUENCE OF HwL2VlanStackingExtEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6
hwL2VlanStackingExtEntry
HwL2VlanStackingExtEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1
hwL2VlanStackingExtPortIndexConfigured QinQ-Port Index.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.1
hwL2VlanStackingExtVlanIdThis vlan-id need be poped or pushed in interface.
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.2
hwL2VlanStackingExtActionThe packet will be poped or pushed.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.3
hwL2VlanStackingExtDirectionThe direction which the packet need be poped or pushed. That is, the packet is receviced or transitted.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.4
hwL2VlanStackingExtVlanListLowIf hwL2VlanStackingBothAction is pop, the packet which has hwL2VlanStackingBothPopOrPushVlanId will be taken tag away. If hwL2VlanStackingBothAction is push, the packet will be added tag which is hwL2VlanStackingBothPopOrPushVlanId.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.5
hwL2VlanStackingExtVlanListHighIf hwL2VlanStackingBothAction is pop, the packet which has hwL2VlanStackingBothPopOrPushVlanId will be taken tag away. If hwL2VlanStackingBothAction is push, the packet will be added tag which is hwL2VlanStackingBothPopOrPushVlanId.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.6
hwL2VlanStackingExtRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.7
hwL2VlanStackingExtPriorityModeThe priority mode of outer VLAN, the priority can be appointed or inherit from inner VLAN's priority.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.8
hwL2VlanStackingExtVlan8021pThe 8021p of outer VLAN ID after pushing, it's an optional field, its default value is 0.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.9
hwL2VlanQinQTableThe table contains global view configuration information for Flexible QinQ.
SEQUENCE OF HwL2VlanQinQEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.7
hwL2VlanQinQEntryFlexible QinQ configuration Entry.
HwL2VlanQinQEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1
hwL2VlanQinQIndexIndex number of Flexible QinQ.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.1
hwL2VlanQinQDirectionInbound or outbound direction for VPN instance.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.2
hwL2VlanQinQOutSideVlanIdOutside vlan-id for ISP.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.3
hwL2VlanSysQinQRowStatusThe table contains interface view configuration information for Flexible QinQ.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.4
hwL2VlanInterfaceQinQTableInterface view Flexible QinQ configuration table.
SEQUENCE OF HwL2VlanInterfaceQinQEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.8
hwL2VlanInterfaceQinQEntryInterface view Flexible QinQ configuration entry.
HwL2VlanInterfaceQinQEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1
hwL2VlanQinQInterfaceIndexInterface index.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.1
hwL2VlanQinQCVlanIdClient vlan-id.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.2
hwL2VlanQinQSVlanIdInternet service provide vlan-idrw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.3
hwL2VlanQinQActionAction push or nop.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.4
hwL2VlanQinQNewCVlanIdReplaced of new client vlan-id.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.5
hwL2VlanInterfaceQinQRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.6
hwL2DVlanMappingTableThe table contains double Vlan-Mapping.
SEQUENCE OF HwL2DVlanMappingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9
hwL2DVlanMappingEntryThe table contains double Vlan-Mapping entry.
HwL2DVlanMappingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1
hwL2DVlanMappingInterfaceIndexInterface Index.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.1
hwL2DVlanMappingExternalVlanIdService vlan-id.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.2
hwL2DVlanMappingInternalVlanIdClient vlan-id.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.3
hwL2DVlanMappingDirectionDirection inbound and outbound.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.4
hwL2DVlanMappingMapExternalVlanIdReplaced of new service vlan-id.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.5
hwL2DVlanMappingMapInternalVlanIdReplaced of new client vlan-id.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.6
hwL2DVlanMappingActionAction drop, pop-externalvlan and swap.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.7
hwL2DVlanMappingRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.8
hwL2VlanMappingExtTableConfiguration table.
SEQUENCE OF HwL2VlanMappingExtEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10
hwL2VlanMappingExtEntryThe table contains Vlan-Mapping entry.
HwL2VlanMappingExtEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1
hwL2VlanMappingExtPortIndexPort Index.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.1
hwL2VlanMappingExtDirectionDirection inbound and outbound.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.2
hwL2VlanMappingExtVlanIdThe outside vlan-id.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.3
hwL2VlanMappingExtVlanListLowThe possible value of the inside vlan list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.4
hwL2VlanMappingExtVlanListHighThe possible value of the inside vlan list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.5
hwL2VlanMappingExtRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.6
hwL2VlanMappingExtPriorityModeThe priority mode of outside VLAN after mapping, the priority can be appointed or inherit from inner VLAN's priority.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.7
hwL2VlanMappingExtVlan8021pThe priority of outside VLAN after mapping, its default value is 0.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.8
hwL2VlanStackingAdvTableThe table of advanced vlan stacking.
SEQUENCE OF HwL2VlanStackingAdvEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11
hwL2VlanStackingAdvEntryThe entry of advanced vlan stacking table.
HwL2VlanStackingAdvEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1
hwL2VlanStackingAdvPortIndexThe Index of L2-Switch Interface.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.1
hwL2VlanStackingAdvOutside8021pThe 8021p value of vlan before stacked operation.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.2
hwL2VlanStackingAdvStackVlanIdThe outer vlan-id after stacked operation.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.3
hwL2VlanStackingAdvStack8021pThe 8021p of outer vlan-id after stacked, it's an optional field, if it is not selected, its value is 8.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.4
hwL2VlanStackingAdvMapVlanIdThe possible value of the inner vlan after mapped operation.
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.5
hwL2VlanStackingAdvOutsideVlanListLowThe possible value of the CE-Vlan low list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.6
hwL2VlanStackingAdvOutsideVlanListHighThe possible value of the CE-Vlan high list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.7
hwL2VlanStackingAdvRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.8
hwL2VlanMappingAdvTableThe table of advanced vlan mapping.
SEQUENCE OF HwL2VlanMappingAdvEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12
hwL2VlanMappingAdvEntryThe entry of advanced vlan mapping table.
HwL2VlanMappingAdvEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1
hwL2VlanMappingAdvPortIndexThe index of L2-Switch port.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.1
hwL2VlanMappingAdvOutsideVlan8021pThe possible value of the CE-Vlan's 802.1p.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.2
hwL2VlanMappingAdvMapVlanIdThe mapped vlan-id, using it as the index.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.3
hwL2VlanMappingAdvMapVlan8021pThe 8021p of outer vlan-id after mapped, it's an optional field, if it is not selected, its value is 8.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.4
hwL2VlanMappingAdvOutsideVlanListLowThe possible value of the CE-Vlan low listrw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.5
hwL2VlanMappingAdvOutsideVlanListHighThe possible value of the CE-Vlan high list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.6
hwL2VlanMappingAdvRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.7
hwL2VlanSwitchTableThe table to config the vlan switch.
SEQUENCE OF HwL2VlanSwitchEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13
hwL2VlanSwitchEntryThe entry of the vlan switch table.
HwL2VlanSwitchEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1
hwL2VlanSwitchIfIndexThe interface index.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.1
hwL2VlanSwitchOuterVlanIdThe ID of the outer vlan tag(customer's tag).
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.2
hwL2VlanSwitchInnerVlanIdThe ID of the inner vlan tag.
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.3
hwL2VlanSwitchModeThe Mode of switch vlan operation, including the following case: 0 to 1, 0 to 2, 1 to 0, 1 to 1, 1 to 2, 2 to 0, 2 to 1, 2 to 2.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.4
hwL2VlanSwitchOuterSwitchVlanIdThe outer vlan-id after switched.rw
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.5
hwL2VlanSwitchInnerSwitchVlanIdThe inner vlan-id after switched. 0 indicates it's not used.rw
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.6
hwL2VlanSwitch8021pRemarkThe 8021p of outer vlan-id after switched, it's an optional field, if it is not selected, its value is 8.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.7
hwL2VlanSwitchOutIfIndexThe out interface index.rw
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.8
hwL2VlanSwitchMtuThe value of mtu.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.9
hwL2VlanSwitchMtuDiscardPktsThe number of discard packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.10
hwL2VlanSwitchMtuDiscardBytesThe number of discard bytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.11
hwL2VlanSwitchMtuResetFlagThe flag of reset the discard statistics.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.12
hwL2VlanSwitchMtuEnableFlagThe flag of enable the discard statistics.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.13
hwL2VlanSwitchRowStatusUsed for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwL2VlanSwitchTable pointing to the row, the agent MUST also destroy the corresponding entries in hwL2VlanSwitchTable.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.14
hwL2VlanQinqVlanTransEnaTableThe table of QinQ VLAN translation enable.
SEQUENCE OF HwL2VlanQinqVlanTransEnaEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.14
hwL2VlanQinqVlanTransEnaEntryThe entry of QinQ VLAN translation enable.
HwL2VlanQinqVlanTransEnaEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1
hwL2VlanQinqVlanTransEnaPortIndexThe index of L2-Switch port.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.1
hwL2VlanQinqVlanTransEnaEnable QinQ VLAN translation.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.2
hwL2VlanQinqVlanTransEnaRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.3
hwL2VlanQinqVlanTransMissDropTableThe table of QinQ VLAN translation miss drop.
SEQUENCE OF HwL2VlanQinqVlanTransMissDropEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.15
hwL2VlanQinqVlanTransMissDropEntryThe entry of QinQ VLAN translation miss drop.
HwL2VlanQinqVlanTransMissDropEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1
hwL2VlanQinqVlanTransMissDropPortIndexThe index of L2-Switch port.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.1
hwL2VlanQinqVlanTransMissDropPackets are dropped when a VLAN translation miss occurs.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.2
hwL2VlanQinqVlanTransMissDropRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.3
hwL2VlanViewMappingTableThe table of vlan-mapping at the VLAN view.
SEQUENCE OF HwL2VlanViewMappingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.16
hwL2VlanViewMappingEntryThe table contains vlan-mapping at the VLAN view entry.
HwL2VlanViewMappingEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1
hwL2VlanViewMappingVlanIdThe VLAN ID before mapping, using it as the index.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.1
hwL2VlanViewMappingDirectionDirection inbound and outbound.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.2
hwL2VlanViewMappingMapVlanIdThe VLAN ID after mapping.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.3
hwL2VlanViewMappingPriorityModeThe priority mode: the priority can be remarked or inherit: 1: priority inherit 2: remark 8021prw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.4
hwL2VlanViewMappingVlan8021pThe priority after mapping, its default value is 0.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.5
hwL2VlanViewMappingRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.6
hwL2VlanStackingMaskTableThe table of VLAN-stacking with Mask.
SEQUENCE OF HwL2VlanStackingMaskEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17
hwL2VlanStackingMaskEntryThe entry of the table of VLAN-stacking with Mask.
HwL2VlanStackingMaskEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1
hwL2VlanStackingMaskPortIndexThe index of L2-Switch interface.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.1
hwL2VlanStackingMaskStackVlanIdThe outer VLAN-ID after stacking operation.
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.2
hwL2VlanStackingMaskStack8021pThe 8021p of outer VLAN-ID after stacking, it's an optional field, if it is not selected, its value is 8, means inherit the 8021p from inner tag.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.3
hwL2VlanStackingMaskActionThe packet will be poped or pushed.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.4
hwL2VlanStackingMaskDirectionThe direction which the packet need be poped or pushed, that is ,the packet is receviced or transitted
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.5
hwL2VlanStackingMaskVlanListLowThe possible value of the CE-VLAN low list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.6
hwL2VlanStackingMaskVlanListHighThe possible value of the CE-VLAN high list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.7
hwL2VlanStackingMaskRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.8
hwL2VlanIpSubnetVlanTableThe table of VLAN assignment based on ip subnet.
SEQUENCE OF HwL2VlanIpSubnetVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.18
hwL2VlanIpSubnetVlanEntryThe entry of the table of VLAN assignment based on ip subnet.
HwL2VlanIpSubnetVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1
hwL2VlanIpSubnetVlanVlanIdThe VLAN-ID after VLAN assignment based on ip subnet.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.1
hwL2VlanIpSubnetVlanIpSubnetIndexThe index of ip subnet on this vlan, ranging from integer 1 to 12.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.2
hwL2VlanIpSubnetVlanIpAddressThe IpAddress based on vlan.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.3
hwL2VlanIpSubnetVlanIpSubnetMaskThe IpAddress or Ip subnet mask.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.4
hwL2VlanIpSubnetVlanPriorityThe priority after vlan assignment based on ip subnet, its default value is 0.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.5
hwL2VlanIpSubnetVlanRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.6
hwL2VlanMacVlanTableThe table of VLAN assignment based on MAC.
SEQUENCE OF HwL2VlanMacVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.19
hwL2VlanMacVlanEntryThe entry of the table of VLAN assignment based on MAC.
HwL2VlanMacVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1
hwL2VlanMacVlanVlanIdmac-vlan.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.1
hwL2VlanMacVlanMacThe VLAN-ID after VLAN assignment based on mac.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.2
hwL2VlanMacVlanVlanPriorityThe priority after vlan assignment based on mac, its default value is 0.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.3
hwL2VlanMacVlanMacRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.4
hwL2VlanProtocolVlanTableThe table of VLAN assignment based on protocol.
SEQUENCE OF HwL2VlanProtocolVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.20
hwL2VlanProtocolVlanEntryThe entry of the table of VLAN assignment based on protocol.
HwL2VlanProtocolVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1
hwL2VlanProtocolVlanVlanIdThe VLAN-ID after VLAN assignment based on protocol.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.1
hwL2VlanProtocolVlanProtocolIndexThe index of protocol on vlan, ranging from integer 1 to 16
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.2
hwL2VlanProtocolVlanProtocolTypeProtocol type.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.3
hwL2VlanProtocolVlanEncapTypeEncap type, include ETHERII,SNAP,LLC.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.4
hwL2VlanProtocolVlanRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.5
hwL2VlanPolicyVlanTableThe table of VLAN assignment based on strategy.
SEQUENCE OF HwL2VlanPolicyVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.21
hwL2VlanPolicyVlanEntryThe entry of the table of VLAN assignment based on strategy.
HwL2VlanPolicyVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1
hwL2VlanPolicyVlanMacSupport MAC+IP and MAC+IP+PORT.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.1
hwL2VlanPolicyVlanIpSupport MAC+IP and MAC+IP+PORT.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.2
hwL2VlanPolicyVlanPortSupport MAC+IP+PORT.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.3
hwL2VlanPolicyVlanVlanIdThe VLAN-ID after VLAN assignment based on policy.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.4
hwL2VlanPolicyVlanVlanPriorityThe VLAN-ID after VLAN assignment based on policy.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.5
hwL2VlanPolicyVlanRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.6
hwL2VlanVoiceVlanEnabledVlanIdIndicates the global voice VLAN ID. Global voice VLAN is enabled if the value ranges from 1 to 4094; global voice VLAN is disabled if the value is 0.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.22
hwL2VlanVoiceVlanAgingTimeVoice vlan aging time(in minute). The default value is 1440.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.23
hwL2VlanVoiceVlanSecurityModeVoice vlan security mode status.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.24
hwL2VlanVoiceVlanPortTableA list of voice vlan mode entries.
SEQUENCE OF HwL2VlanVoiceVlanPortEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.25
hwL2VlanVoiceVlanPortEntryAn entry containing voice vlan mode information, which is applicable to a voice vlan enabled interface.
HwL2VlanVoiceVlanPortEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1
hwL2VlanVoiceVlanPortIndexThe port index on which voice vlan is enabled.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.1
hwL2VlanVoiceVlanPortEnableVoice VLAN enable status at port .rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.2
hwL2VlanVoiceVlanPortModeVoice VLAN configuration mode status, 1 for auto, 2 for manual.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.3
hwL2VlanVoiceVlanPortLegacyThis flag is enabled. It indicates that the interworking with other vendors' equipment is enabled.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.4
hwL2VlanVoiceVlanPortSecurityModeVoice VLAN configuration security mode status, 1 for security, 2 for normal.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.5
hwL2VlanVoiceVlanPortModifyPriorityModeThe value of this object identifies the priority of voice packets to be forwarded , 1 for modifyPriByVlan, 2 for modifyPriByOui.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.6
hwL2VlanVoiceVlanOuiTableA table containing the MAC address which can be identified by voice vlan.
SEQUENCE OF HwL2VlanVoiceVlanOuiEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.26
hwL2VlanVoiceVlanOuiEntryAn entry containing the information of MAC address which can be identified by voice vlan.
HwL2VlanVoiceVlanOuiEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1
hwL2VlanVoiceVlanOuiAddressMAC address can be identified by Voice VLAN.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.1
hwL2VlanVoiceVlanOuiMaskThe mask of MAC address.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.2
hwL2VlanVoiceVlanOuiDescriptionThe description of OUI.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.3
hwL2VlanVoiceVlanOuiRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.4
hwL2VlanMappingMultiTableConfiguration table.
SEQUENCE OF HwL2VlanMappingMultiEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27
hwL2VlanMappingMultiEntryThe table contains Vlan-Mapping entry.
HwL2VlanMappingMultiEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1
hwL2VlanMappingMultiPortIndexPort Index.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.1
hwL2VlanMappingMultiDirectionDirection inbound and outbound.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.2
hwL2VlanMappingMultiVlanIdThe outside vlan-id.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.3
hwL2VlanMappingMultiVlan8021pThe priority of outside VLAN after mapping,8 means priority-inherit.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.4
hwL2VlanMappingMultiVlanListLowThe possible value of the inside vlan list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.5
hwL2VlanMappingMultiVlanListHighThe possible value of the inside vlan list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.6
hwL2VlanMappingMultiRowStatusThis table can be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.7
hwL2VlanMacVlanNewTableThe table of VLAN assignment based on MAC.
SEQUENCE OF HwL2VlanMacVlanNewEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.28
hwL2VlanMacVlanNewEntryThe entry of the table of VLAN assignment based on MAC.
HwL2VlanMacVlanNewEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1
hwL2VlanMacVlanNewMacThe VLAN-ID after VLAN assignment based on MAC.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.1
hwL2VlanMacVlanNewVlanIdMAC-VLAN VLAN ID.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.2
hwL2VlanMacVlanNewVlanPriorityThe priority after VLAN assignment based on MAC, its default value is 0.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.3
hwL2VlanMacVlanNewMacRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.4
hwL2VlanProtocolVlanNewTableThe table of VLAN assignment based on protocol.
SEQUENCE OF HwL2VlanProtocolVlanNewEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.29
hwL2VlanProtocolVlanNewEntryThe entry of the table of VLAN assignment based on protocol.
HwL2VlanProtocolVlanNewEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1
hwL2VlanProtocolVlanNewVlanIdThe VLAN-ID after VLAN assignment based on protocol.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.1
hwL2VlanProtocolVlanNewProtocolIndexThe index of protocol on vlan, ranging from integer 1 to 16
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.2
hwL2VlanProtocolVlanNewProtocolTypeProtocol type.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.3
hwL2VlanProtocolVlanNewProtocolTypeValueThe value of the configured protocol type. The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follows. |============================================================================================| | hwL2VlanProtocol-| | hwL2VlanProtocolVlanNewProtocolTypeValue | | VlanProtocolType | ProtocolSubType | | |============================================================================================| | ipv4 | notused | Zero length string | |============================================================================================| | ipv6 | notused | Zero length string | |============================================================================================| | at | notused | Zero length string | |============================================================================================| | ipx | ethernetii | Zero length string | | | llc | | | | raw | | | | snap | | |============================================================================================| | mode-ethernetii | etype | hex string like '600', which means 0x0600. | | | | The range is [0x600..0xffff] | |============================================================================================| | mode-llc | etype | the sequence of different parts is as follows. | | | | [dsap value;ssap value] | | | | Both range is [0x00..0xff] | | | | | | | | For example. Suppose value of dsap and ssap are 0x09 | | | | and 0x0a, the value is '090a' | |============================================================================================| | mode-snap | etype | hex string like '600', which means 0x0600. | | | | The range is [0x600..0xffff] | |============================================================================================|rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.4
hwL2VlanProtocolVlanNewRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.5
hwL2VlanPolicyVlanNewTableThe table of VLAN assignment based on strategy.
SEQUENCE OF HwL2VlanPolicyVlanNewEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.30
hwL2VlanPolicyVlanNewEntryThe entry of the table of VLAN assignment based on strategy.
HwL2VlanPolicyVlanNewEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1
hwL2VlanPolicyVlanNewMacSupport MAC+IP and MAC+IP+PORT.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.1
hwL2VlanPolicyVlanNewIpSupport MAC+IP and MAC+IP+PORT.
IpAddress
.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.2
hwL2VlanPolicyVlanNewPortSupport MAC+IP+PORT.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.3
hwL2VlanPolicyVlanNewVlanIdThe VLAN-ID after VLAN assignment based on policy.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.4
hwL2VlanPolicyVlanNewVlanPriorityThe Priority after VLAN assignment based on policy.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.5
hwL2VlanPolicyVlanNewRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.6
hwL2VlanProtocolVlanPortNewTableProtocol-based VLAN port information table. hwL2VlanProtocolVlanPortNewVlanId refers to hwL2VlanProtocolVlanNewVlanId in hwL2VlanProtocolVlanNewTable. hwL2VlanProtocolVlanPortNewProtocolId refers to hwL2VlanProtocolVlanNewProtocolIndex in hwL2VlanProtocolVlanNewTable. So if the value of hwL2VlanProtocolVlanPortNewVlanId and hwL2VlanProtocolVlanPortNewProtocolId have no corresponding entry in hwL2VlanProtocolVlanNewTable, set operation for this table will fail.
SEQUENCE OF HwL2VlanProtocolVlanPortNewEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.31
hwL2VlanProtocolVlanPortNewEntryProtocol-based VLAN port information entry.
HwL2VlanProtocolVlanPortNewEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1
hwL2VlanProtocolVlanPortNewIndexThe maximum number is the total number of the ports supported by device.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.1
hwL2VlanProtocolVlanPortNewVlanIdThe protocol-based VLAN ID.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.2
hwL2VlanProtocolVlanPortNewProtocolIndexThe protocol index.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.3
hwL2VlanProtocolVlanPortNewPriorityThe protocol-based VLAN priority.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.4
hwL2VlanProtocolVlanPortNewRowStatusThe row status of this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.5
hwL2VlanMultiVoiceVlanPortTableVoice VLAN is enabled on the port.
SEQUENCE OF HwL2VlanMultiVoiceVlanPortEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.32
hwL2VlanMultiVoiceVlanPortEntryAn entry containing voice VLAN mode information, which is applicable to a voice VLAN enabled interface.
HwL2VlanMultiVoiceVlanPortEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1
hwL2VlanMultiVoiceVlanIfIndexThe interface index on which voice VLAN is enabled.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.1
hwL2VlanMultiVoiceVlanPortVLanIdThe VLAN ID of voice VLAN on port .rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.2
hwL2VlanMultiVoiceVlanPortUntagEnableThe value of this object identifies whether untagged voice packets can be forwarded in voice VLAN, 1 for enabled, 2 for disabled.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.3
hwL2VlanMultiVoiceVlanPortRowStatusThe row status of this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.51
hwL2VlanSwitchExtTableThe table to config the vlan switch.
SEQUENCE OF HwL2VlanSwitchExtEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33
hwL2VlanSwitchExtEntryThe entry of the vlan switch table.
HwL2VlanSwitchExtEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1
hwL2VlanSwitchExtNameThe vlan switch name.
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.1
hwL2VlanSwitchExtSrcIfIndexThe index of source interface.rw
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.2
hwL2VlanSwitchExtOuterVlanIdThe outer vlan.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.3
hwL2VlanSwitchExtVlanListLowThe possible value of the inside vlan list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.4
hwL2VlanSwitchExtVlanListHighThe possible value of the inside vlan list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.5
hwL2VlanSwitchExtDstIfIndexThe index of destination interface.rw
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.6
hwL2VlanSwitchExtVlanXlateActionThe action type of vlan: 1 : unchange vlan, 2 : switch vlan, 3 : push vlan.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.7
hwL2VlanSwitchExtDstVlanThe outer vlan of destination.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.8
hwL2VlanSwitchExtDstInnerVlanThe inner vlan of destination.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.9
hwL2VlanSwitchExtRemarkThe remark 8021p value.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.10
hwL2VlanSwitchExtRemarkReverseThe reverse remark 8021p value.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.11
hwL2VlanSwitchExtLinkStatusThe link status of vlan switch.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.12
hwL2VlanSwitchExtRowStatusThe row status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.51
hwL2VlanPrecedenceDetermine whether to select the MAC-based VLAN or subnet-based VLAN, 1:MAC VLAN(default); 2:IPSUBNET VLAN.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.34
hwL2VlanXlateTableVLAN mapping configuration table.
SEQUENCE OF HwL2VlanXlateEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35
hwL2VlanXlateEntryThe entry in the VLAN mapping configuration table.
HwL2VlanXlateEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1
hwL2VlanXlateInterfaceIndexThe index of the interface.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.1
hwL2VlanXlateVlanIdBeginThe ID of the first VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags) at the user side.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.2
hwL2VlanXlateVlanIdEndThe ID of the end VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags) at the user side.rw
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.3
hwL2VlanXlateOuterVlanIdThe value of outer VLAN for packets with double tags in customer side. For one-tag-packet, it's 0.
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.4
hwL2VlanXlateVlan8021pThe priority of the packet in customer side.
Integer32(0..8 | 65535)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.5
hwL2VlanXlateDirectionDirection inbound or outbound or both.
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.6
hwL2VlanXlateActionThe packet will be mapped or stacked or poped.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.7
hwL2VlanXlateToVlanIdThe ID of the outer VLAN at the network side. If this VLAN is not in use, the ID is 0.rw
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.8
hwL2VlanXlateToinnerVlanIdThe value of inner VLAN in network side. It's 0 when it is not used.rw
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.9
hwL2VlanXlateremarkThe priority of outer VLAN in network side.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.10
hwL2VlanXlateRowStatusOperation status.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.51
hwL2QinQVlanTableThe table of QinQ-VLAN configuration.
SEQUENCE OF HwL2QinQVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36
hwL2QinQVlanEntryThe entry of QinQ-VLAN table.
HwL2QinQVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1
hwL2QinQVlanIfIndexThe index number of QinQ-VLAN port.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.1
hwL2QinQVlanIdBeginThe begin VLAN ID of outside.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.2
hwL2QinQVlanIdEndThe end VLAN ID of outside.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.3
hwL2QinQVlanInnerVlanIdBeginThe begin VLAN ID of inside.
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.4
hwL2QinQVlanInnerVlanIdEndThe end VLAN ID of inside.
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.5
hwL2QinQVlan8021pBeginThe begin number of 8021p.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.6
hwL2QinQVlan8021pEndThe end number of 8021p.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.7
hwL2QinQVlanEtherTypeThe value of Ethernet Type.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.8
hwL2QinQVlanModeThe mode of QinQ-VLAN configuration.rw
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.9
hwL2QinQVlanChangedVlanIdThe changed VLAN ID of outside.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.10
hwL2QinQVlanChangedInnerVlanIdThe changed VLAN ID of inside.rw
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.11
hwL2QinQVlanRemarkThe remark number of outside 8021p.If the value is 8, the priority in the outer tag is not changed.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.12
hwL2QinQVlanMapStackVlanIdThe map VLAN ID for inside after stacking action.rw
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.13
hwL2QinQVlanRowStatusThis table can read, create and delete.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.14
hwL2UntagAddDTagTableThe table of untagged VLAN add double tagged VLAN configuration.
SEQUENCE OF HwL2UntagAddDTagEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.37
hwL2UntagAddDTagEntryThe entry of untagged VLAN add double tagged VLAN table.
HwL2UntagAddDTagEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1
hwL2UntagAddDTagPortIndexThe port index number of interface.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.1
hwL2UntagAddDTagOuterVlanIdThe outer VLAN ID.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.2
hwL2UntagAddDTagInnerVlanIdThe inner VLAN ID.rw
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.3
hwL2UntagAddDTagRowStatusThis table can read, create and delete.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.4
hwL2VlanVoiceVlan8021pIt indicates the IEEE 802.1Q priority of the voice VLAN and the default value is 6.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.38
hwL2VlanVoiceVlanDscpIt indicates the Differentiated Services CodePoint priority of the voice VLAN and the default value is 0x2e.rw
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.39
hwL2QinQIsolateTableConfiguration table.
SEQUENCE OF HwL2QinQIsolateEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.40
hwL2QinQIsolateEntryQinQ-VLAN isolate port configuration table.
HwL2QinQIsolateEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1
hwL2QinQIsolatePortIndexIndex number of QinQ-port isolate port, use it as the Index.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.1
hwL2QinQIsolateVlanIdThe global vlan identifier that is associated with the QinQ-port, use it as the Index.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.2
hwL2QinQIsolatePeVlanIdOutside vlan-id of QinQ-port ,use it as the Index.
VlanIdOrNone (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.3
hwL2QinQIsolateCeVlanListLowThe possible value of the CE vlan-id list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.4
hwL2QinQIsolateCeVlanListHighThe possible value of the CE vlan-id list.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.5
hwL2QinQTagTypeThe mode of QinQ-VLAN configuration.ro
Enumeration
.1.3.6.1.4.1.2011.5.25.42.3.1.2.40.1.6
hwL2VlanStatistics
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.1.3
hwL2IfStatVlanCfgTableThe table contains statistics enable configuration for the port and vlan.
SEQUENCE OF HwL2IfStatVlanCfgEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.1
hwL2IfStatVlanCfgEntryEntries of vlan and port statistics enable table.
HwL2IfStatVlanCfgEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1
hwL2IfStatVlanCfgPortIndexThe virtual index of L2 Interface.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.1
hwL2IfStatVlanCfgVlanIdThe vlan-id of packets'tag that's received or sent out from the port.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.2
hwL2IfStatVlanCfgEnableFlagThe flag of enable the statistic function based on vlan in the interface.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.11
hwL2IfStatVlanCfgRowStatusUsed for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwL2IfStatVlanCfgTable pointing to the row, the agent MUST also destroy the corresponding entries in hwL2IfStatVlanCfgTable.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.12
hwL2IfStat8021pCfgTableThe table contains statistics enable for the port and 8021p.
SEQUENCE OF HwL2IfStat8021pCfgEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.2
hwL2IfStat8021pCfgEntryEntries of port and 8021p statistics enable table.
HwL2IfStat8021pCfgEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1
hwL2IfStat8021pCfgPortIndexThe virtual index of L2 Interface.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.1
hwL2IfStat8021pCfg8021pThe 8021p of packet's tag that's received or sent from the port.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.2
hwL2IfStat8021pCfgEnableFlagThe flag of enable the static function based on 8021p in the interface.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.11
hwL2IfStat8021pCfgRowStatusUsed for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwL2IfStat8021pCfgTable pointing to the row, the agent MUST also destroy the corresponding entries in hwL2IfStat8021pCfgTable.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.12
hwL2IfStat8021pAndVlanCfgTableThe table contains statistics enable for the port, vlan and 8021p.
SEQUENCE OF HwL2IfStat8021pAndVlanCfgEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.3
hwL2IfStat8021pAndVlanCfgEntryEntries of port, 8021p and vlan statistics enable table.
HwL2IfStat8021pAndVlanCfgEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1
hwL2IfStat8021pAndVlanCfgPortIndexThe virtual index of L2 Interface.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.1
hwL2IfStat8021pAndVlanCfgVlanIdThe vlan-id of packet's tag that's received or sent out from the port.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.2
hwL2IfStat8021pAndVlanCfg8021pThe 8021p value of packet's tag that's received or sent from the port.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.3
hwL2IfStat8021pAndVlanCfgEnableFlagThe Flag of enable the static function based on vlan-id and 8021p in the interface.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.11
hwL2IfStat8021pAndVlanCfgRowStatusUsed for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwL2IfStat8021pAndVlanCfgTable pointing to the row, the agent MUST also destroy the corresponding entries in hwL2IfStat8021pAndVlanCfgTable.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.12
hwL2VlanStatTableThe table contains statistics information for the vlan.
SEQUENCE OF HwL2VlanStatEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4
hwL2VlanStatEntryEntries of vlan statistics table.
HwL2VlanStatEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1
hwL2VlanStatVlanIdThe vlan-id.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.1
hwL2VlanStatInTotalPktsThe number of received packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.2
hwL2VlanStatInTotalBytesThe byte number of received packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.3
hwL2VlanStatOutTotalPktsThe number of sent packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.4
hwL2VlanStatOutTotalBytesThe byte number of sent packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.5
hwL2VlanStatUnknownUcastDiscardPktsThe number of aborted unknown unicast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.6
hwL2VlanStatUnknownMcastDiscardPktsThe number of aborted unknown multicast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.7
hwL2VlanStatBcastDiscardPktsThe number of aborted broadcast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.8
hwL2VlanStatInUcastPktsThe number of received unicast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.9
hwL2VlanStatInUcastBytesThe number of received unicast packets' bytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.10
hwL2VlanStatOutUcastPktsThe number of sent unicast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.11
hwL2VlanStatOutUcastBytesThe number of sent unicast packets' bytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.12
hwL2VlanStatInMcastPktsThe number of received multicast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.13
hwL2VlanStatInMcastBytesThe number of received multicast packets' bytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.14
hwL2VlanStatOutMcastPktsThe number of sent multicast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.15
hwL2VlanStatOutMcastBytesThe number of sent multicast packets' bytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.16
hwL2VlanStatInBcastPktsThe number of received broadcast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.17
hwL2VlanStatInBcastBytesThe number of received broadcast packets' bytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.18
hwL2VlanStatOutBcastPktsThe number of sent broadcast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.19
hwL2VlanStatOutBcastBytesThe number of sent broadcast packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.20
hwL2VlanStatResetFlagThe flag of reset.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.21
hwL2IfStatVlanTableThe table contains statistics information for the port and vlan.
SEQUENCE OF HwL2IfStatVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5
hwL2IfStatVlanEntryEntries of vlan and port statistics table.
HwL2IfStatVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1
hwL2IfStatVlanPortIndexThe virtual Index of L2 Interface.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.1
hwL2IfStatVlanIdThe vlan-id of packets'tag that's received or sent out from the port.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.2
hwL2IfStatVlanInTotalPktsThe number of received packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.3
hwL2IfStatVlanInTotalBytesThe bytes of received packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.4
hwL2IfStatVlanOutTotalPktsThe number of sent packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.5
hwL2IfStatVlanOutTotalBytesThe bytes of sent packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.6
hwL2IfStatVlanInPktsRateThe rate of received packets.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.7
hwL2IfStatVlanInBytesRateThe rate of received bytes.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.8
hwL2IfStatVlanOutPktsRateThe rate of sent packet.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.9
hwL2IfStatVlanOutBytesRateThe rate of sent bytes.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.10
hwL2IfStatVlanInUcastPktsThe number of unicast packets received.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.11
hwL2IfStatVlanInUcastBytesThe number of unicast bytes received.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.12
hwL2IfStatVlanOutUcastPktsThe packet number of unicast packets sent.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.13
hwL2IfStatVlanOutUcastBytesThe number of unicast bytes sent.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.14
hwL2IfStatVlanInMcastPktsThe number of multicast packets received.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.15
hwL2IfStatVlanInMcastBytesThe number of multicast bytes received.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.16
hwL2IfStatVlanOutMcastPktsThe number of multicast packets sent.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.17
hwL2IfStatVlanOutMcastBytesThe number of multicast bytes sent.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.18
hwL2IfStatVlanInBcastPktsThe number of broadcast packets received.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.19
hwL2IfStatVlanInBcastBytesThe number of broadcast bytes received.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.20
hwL2IfStatVlanOutBcastPktsThe number of broadcast packets sent.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.21
hwL2IfStatVlanOutBcastBytesThe number of broadcast bytes sent.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.22
hwL2IfStatVlanResetFlagThe flag of reset the statistic counter.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.23
hwL2IfStat8021pTableThe table contains statistics information for the port and 8021p.
SEQUENCE OF HwL2IfStat8021pEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6
hwL2IfStat8021pEntryEntries of port and 8021p statistics table.
HwL2IfStat8021pEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1
hwL2IfStat8021pPortIndexThe virtual index of L2 Interface.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.1
hwL2IfStat8021pThe priority of the packet's tag.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.2
hwL2IfStat8021pInTotalPktsThe number of received packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.3
hwL2IfStat8021pInTotalBytesThe bytes of received packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.4
hwL2IfStat8021pOutTotalPktsThe number of sent packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.5
hwL2IfStat8021pOutTotalBytesThe bytes of sent packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.6
hwL2IfStat8021pInPktsRateThe rate of received packets.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.7
hwL2IfStat8021pInBytsRateThe rate of received bytes.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.8
hwL2IfStat8021pOutPktsRateThe rate of the sent packets.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.9
hwL2IfStat8021pOutBytesRateThe rate of sent bytes.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.10
hwL2IfStat8021pResetFlagThe flag of reset the statistic counter.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.11
hwL2IfStat8021pAndVlanTableThe table contains statistics information for the port ,8021p and vlan-id.
SEQUENCE OF HwL2IfStat8021pAndVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7
hwL2IfStat8021pAndVlanEntryEntries of port statistics table based on 8021p and vlan-id fields.
HwL2IfStat8021pAndVlanEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1
hwL2IfStat8021pAndVlanPortIndexThe virtual Index of L2 Interface.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.1
hwL2IfStat8021pAndVlanVlanIdVlan-id.
VlanId (Q-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.2
hwL2IfStat8021pAndVlan8021pThe priority in the 8021p packets'tag.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.3
hwL2IfStat8021pAndVlanInTotalPktsThe number of received packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.4
hwL2IfStat8021pAndVlanInTotalBytesThe bytes of received packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.5
hwL2IfStat8021pAndVlanInPktsRateThe rate of received packets.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.6
hwL2IfStat8021pAndVlanInBytsRateThe rate of received bytes.ro
Gauge32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.7
hwL2IfStat8021pAndVlanResetFlagThe flag of reset statistic counters.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.8
hwL2VlanSwitchPSTableThe table to config the vlan switch by Port+SVlan index.
SEQUENCE OF HwL2VlanSwitchPSEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8
hwL2VlanSwitchPSEntryThe entry of the vlan switch IfIndex+SVlan table.
HwL2VlanSwitchPSEntry
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1
hwL2VlanSwitchPSIfIndexThe interface index.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.1
hwL2VlanSwitchPSSVlanIdVlan-id.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.2
hwL2VlanSwitchPSCVlanIdCVlan-id.
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.3
hwL2VlanSwitchPSInputPktsThe number of inbound discard packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.4
hwL2VlanSwitchPSInputBytesThe number of inbound discard bytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.5
hwL2VlanSwitchPSOutputPktsThe number of outbound discard packets.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.6
hwL2VlanSwitchPSOutputBytesThe number of outbound discard bytes.ro
Counter64
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.7
hwL2VlanSwitchPSResetFlagThe flag of reset statistics.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.8
hwL2VlanSwitchPSEnableFlagThe flag of enable statistics.rw
EnabledStatus (P-BRIDGE-MIB)
.1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.9
hwL2VlanTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.1.4
hwL2VlanUnkownPacketAlarmWarning of unkown Packets in vlan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.42.3.1.4.1
hwVcmpServerMacConflictMore than one server exists in the VCMP domain.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.42.3.1.4.2
hwVcmpRevisionConflictA server received a VCMP packet with a higher revision number.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.42.3.1.4.3
hwMuxVlanGroupCountExceedThresholdThe number of the group VLANs in the principal VLAN exceeded the upper threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.42.3.1.4.4
hwMuxVlanGroupCountExceedThresholdResumeThe number of the group VLANs in the principal VLAN fell below the lower threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.42.3.1.4.5
hwVlantransCountExceedThresholdThe number of VLAN mapping or VLAN stacking configurations on the interface exceeded the upper threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.42.3.1.4.6
hwVlantransCountExceedThresholdResumeThe number of the VLAN mapping and VLAN stacking configurations on the interface fell below the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.42.3.1.4.7
hwL2VlanTrapObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.1.5
hwVcmpDeviceMacMAC address of a device running VCMPro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.42.3.1.5.1
hwPrincipalVlanIDPrincipal VLAN ID of a MUX VLAN.ro
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.5.2
hwMuxVlanUpperThresholdUpper threshold for the number of group VLANs in a principal VLAN.ro
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.5.3
hwMuxVlanLowerThresholdLower threshold for the number of group VLANs in a principal VLAN.ro
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.5.4
hwVlantransIfIndexIndex of the interface that has vlan mapping or vlan stacking configured.ro
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.5.5
hwVlantransUpperThresholdUpper threshold for the number of vlan mapping and vlan stacking configurations on the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.5.6
hwVlantransLowerThresholdLower threshold for the number of vlan mapping and vlan stacking configurations on the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.42.3.1.5.7
hwL2vlanConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.2
hwL2vlanGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.2.1
hwL2vlanCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.2.2
hwL2VlanTrapsGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.42.3.2.3
HUAWEI-L2VLAN-MIB - SNMP MIB Reference | MIBs Explorer