HUAWEI-BASE-TRAP-MIB
AI MIB Summary
The HUAWEI-BASE-TRAP-MIB defines the standard set of SNMP trap identifiers and variable bindings for Huawei DataCom network devices, serving as the foundational schema for reporting critical system events such as link state changes, hardware failures, and authentication anomalies. This module ensures consistent parsing of asynchronous notifications across the vendor's switching and routing infrastructure by establishing the mandatory base structure for all subsequent, device-specific trap definitions.
This is the base trap definition for DataCom.
Main OID:
hwBaseTrapMIB.1.3.6.1.4.1.2011.5.25.129
13
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
13 total| Object Name |
|---|
hwBaseTrapMIBThis is the base trap definition for DataCom. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.129 |
hwBaseTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.129.1 |
hwBaseTrapSeverityTo describe the level of trap.ro ItuPerceivedSeverity (ITU-ALARM-TC-MIB) .1.3.6.1.4.1.2011.5.25.129.1.1 |
hwBaseTrapProbableCauseTo describe the probable cause of trap.ro IANAItuProbableCause (IANA-ITU-ALARM-TC-MIB) .1.3.6.1.4.1.2011.5.25.129.1.2 |
hwBaseTrapEventTypeTo describe the type of trap.ro IANAItuEventType (IANA-ITU-ALARM-TC-MIB) .1.3.6.1.4.1.2011.5.25.129.1.3 |
hwBaseTrapRelativeResourceThis object may contain a key word to indicate the relative
resource of an entity.
Such as:
hwEntityCommunicateError alarm may relate to a resource
named 'IPC01'(A specified channel). So the trap may contain such a varbind in
DisplayString style.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.129.1.4 |
hwBaseTrapReasonDescrTo describe the reason of trap in DisplayString style.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.129.1.5 |
hwBaseThresholdTableA table to config the threshold of each sensor. SEQUENCE OF HwBaseThresholdEntry .1.3.6.1.4.1.2011.5.25.129.1.6 |
hwBaseThresholdEntryThe entry of threshold table. HwBaseThresholdEntry .1.3.6.1.4.1.2011.5.25.129.1.6.1 |
hwBaseThresholdTypeThe index to indicate the type of threshold for an entry.Such as
temperature, humidity ,power supply...... Enumeration .1.3.6.1.4.1.2011.5.25.129.1.6.1.1 |
hwBaseThresholdIndexA subindex to identify each sensor on physical entity. Integer32 .1.3.6.1.4.1.2011.5.25.129.1.6.1.2 |
hwBaseThresholdValueThe current value that been measured.ro Integer32 .1.3.6.1.4.1.2011.5.25.129.1.6.1.3 |
hwBaseThresholdUnitThe unit for this threshold value.
percentage(1)
centigrade1(2)
centigrade2(3)
voltage1(4)
voltage2(5)
electric current:
current1(6)
current2(7)
power1(8)
power2(9)
::= { hwBaseThresholdEntry 4 }
hwBaseThresholdLowCritical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTIONro Enumeration .hwBaseTrapGroups.2 |