HUAWEI-PIM-BSR-MIB
The HUAWEI-PIM-BSR-MIB module manages Protocol Independent Multicast (PIM) Bootstrap Router (BSR) mechanisms on Huawei network devices to monitor BSR candidate status, RP-set distribution, and multicast routing table consistency. It specifically tracks metrics related to BSR election states, candidate router advertisements, and the synchronization of Rendezvous Points (RPs) across the multicast domain.
Imported Objects
Objects
16 total| Object Name |
|---|
hwMcast OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149 |
hwPimBsrMibThe Mib module for management of IP Multicast, including
multicast routing, data forwarding, and data reception.
Huawei Technologies co.,Ltd . Supplementary information may
be available at:
http://www.huawei.com MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.149.2 |
hwPimBsrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.2.1 |
hwPimBsrElectedBsrRpSetTableThe (conceptual) table listing Bsr-specific information
about PIM group mappings learned via C-RP advertisements
or created locally using configurations. This table is
maintained only on the Elected Bsr.
An Elected Bsr uses this table to create Bootstrap
Messages after applying a local policy to include some
or all of the group mappings in this table. SEQUENCE OF HwPimBsrElectedBsrRpSetEntry .1.3.6.1.4.1.2011.5.25.149.2.1.2 |
hwPimBsrElectedBsrRpSetEntryAn entry (conceptual row) in the
hwPimBsrElectedBsrRpSetTable. HwPimBsrElectedBsrRpSetEntry .1.3.6.1.4.1.2011.5.25.149.2.1.2.1 |
hwPimBsrElectedBsrGrpMappingAddrTypeThe Inet address type of the IP multicast group
prefix. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.149.2.1.2.1.2 |
hwPimBsrElectedBsrGrpMappingGrpAddrThe IP multicast group address which, when combined
with hwPimBsrElectedBsrGrpMappingGrpAddr, gives the
group prefix for this mapping. The InetAddressType is
given by the hwPimBsrElectedBsrGrpMappingAddrType object.
This address object is only significant up to
hwPimBsrElectedBsrGrpMappingGrpAddr bits. The
remainder of the address bits are zero. This is
especially important for this field, which is part of
the index of this entry. Any non-zero bits would
signify an entirely different entry. InetAddress .1.3.6.1.4.1.2011.5.25.149.2.1.2.1.3 |
hwPimBsrElectedBsrGrpMappingGrpPrefixLenThe multicast group prefix length that, when combined
with hwPimBsrElectedBsrGrpMappingGrpAddr, gives the group
prefix for this mapping. The InetAddressType is given by
the hwPimBsrElectedBsrGrpMappingAddrType object. If
hwPimBsrElectedBsrGrpMappingAddrType is 'ipv4' or 'ipv4z',
this object must be in the range 4..32. If
hwPimBsrElectedBsrGrpMappingAddrType is 'ipv6' or 'ipv6z',
this object must be in the range 8..128. InetAddressPrefixLength .1.3.6.1.4.1.2011.5.25.149.2.1.2.1.4 |
hwPimBsrElectedBsrGrpMappingRPAddrThe IP address of the RP to be used for groups within
this group prefix. The InetAddressType is given by the
hwPimBsrElectedBsrGrpMappingAddrType object. InetAddress .1.3.6.1.4.1.2011.5.25.149.2.1.2.1.5 |
hwPimBsrElectedBsrRpSetPriorityThe priority for RP. Numerically higher values for
this object indicate lower priorities, with the value
zero denoting the highest priority.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.2.1.2.1.6 |
hwPimBsrElectedBsrRpSetHoldtimeThe holdtime for RPro Unsigned32 .1.3.6.1.4.1.2011.5.25.149.2.1.2.1.7 |
hwPimBsrElectedBsrRpSetExpiryTimeThe minimum time remaining before this entry will be
aged out. The value zero indicates that this entry will
never be aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.5.25.149.2.1.2.1.8 |
hwPimBsrElectedBsrRpSetGrpBidirIf this object is TRUE, this group range with this
RP is a BIDIR-PIM group range. If it is set to FALSE,
it is a PIM-SM group range.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.149.2.1.2.1.9 |
hwPimBsrConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.2.2 |
hwPimBsrCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.2.2.1 |
hwPimBsrGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.149.2.2.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.