HUAWEI-MPLSLSR-EXT-MIB
AI MIB Summary
The HUAWEI-MPLSLSR-EXT-MIB extends standard MPLS-LSR monitoring on Huawei devices to manage basic MPLS Label Switched Router configurations and associated operational parameters. It provides visibility into core MPLS forwarding elements, including label bindings, interface states, and LSR-specific attributes not covered by the standard MIB.
This MIB provides management of MPLS basic configurations. It is an extension of MPLS-LSR-STD-MIB.
Main OID:
hwMplsLsrExtMIB.1.3.6.1.4.1.2011.5.25.182
65
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
hwMplsLsrExtMIBThis MIB provides management of MPLS basic configurations.
It is an extension of MPLS-LSR-STD-MIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.182 |
hwMplsLsrExtObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.182.1 |
hwMplsLsrIdThis object indicates the configuration of the MPLS LSR ID.
Before the MPLS capability is enabled, the MPLS LSR ID must be configured.
After the MPLS capability is enabled, the MPLS LSR ID cannot be modified or deleted.
If the MPLS LSR ID is set as 0.0.0.0, it indicates that the MPLS LSR ID is deleted.
The MPLS LSR ID and the MPLS capability cannot be configured together.rw IpAddress .1.3.6.1.4.1.2011.5.25.182.1.1 |
hwMplsCapabilityConfigThis object indicates the configuration or deletion of the MPLS capability.
Before the MPLS capability is enabled, the MPLS LSR ID must be configured.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.182.1.2 |
hwMplsLabelAdvertiseThis object indicates the way to configure label advertisement policy.
By default, the label advertisement policy is implicitnull.
Before the label advertisement policy is configured, MPLS capability must be enabled.
Options:
1. explicitNull(1) -indicates that the label advertisement policy is explicitNull.
2. implicitNull(2) -indicates that the label advertisement policy is implicitNull.
3. nonNull(3) -indicates that the label advertisement policy is nonNull.
Default: implicitNull(2)rw Enumeration .1.3.6.1.4.1.2011.5.25.182.1.3 |
hwMplsStatisticsIntervalTimerThis object indicates the value of the MPLS statistics timer.
Range: 30-65535
Default: 0
Unit: secondsrw Integer32 .1.3.6.1.4.1.2011.5.25.182.1.4 |
hwMplsBfdCapabilityConfigThis object indicates the configuration or deletion of the MPLS BFD capability.
Before the MPLS BFD function is enabled, you must enable the MPLS capability and BFD capability.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.182.1.5 |
hwMplsBfdMinTxThis object indicates the minimum forwarding period.
If the minimum forwarding period is set as 0 seconds,
it indicates that the minimum forwarding period returns to the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.182.1.6 |
hwMplsBfdMinRxThis object indicates the minimum receiving period.
If the minimum receiving period is set as 0 seconds,
it indicates that the minimum receiving period returns to the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.182.1.7 |
hwMplsBfdDetectMultiplierThis object indicates the value of the detect multiplier.
If the value of the detect multiplier is set as 0,
it indicates that the value returns to the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.182.1.8 |
hwMplsFecListNameThis object indicates the name of the FEC LIST.
The name of the FEC LIST is globally unique, with a valid length from 1 to 31 characters.
If the character length is 0, it indicates that the FEC LIST is deleted.
Furthermore, the FEC LIST cannot be modified, and you can only delete the FEC LIST and then create a new one.
If the FEC LIST is used by others, you need to cancel the usage and then delete the FEC LIST.
Range: 1-31rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.9 |
hwMplsBfdTriggerThis object indicates the MPLS BFD triggering policy.
By using this object, you can also specify the next hop and the outgoing interface.
To configure the MPLS BFD triggering policy, you must enable MPLS and BFD in advance.
In addition, this MPLS BFD triggering policy cannot be modified,
and you can only delete the policy and then create a new one.
Options:
1. triggerHost(1) -indicates that the MPLS BFD triggering policy was configured as host.
2. triggerFeclist(2) -indicates that the MPLS BFD triggering policy was configured as FEC list.
3. disabled(3) -indicates that the MPLS BFD triggering policy was not configured.
Default: triggerHost(1)rw Enumeration .1.3.6.1.4.1.2011.5.25.182.1.10 |
hwMplsBfdTriggerNextHopThis object indicates the next hop when the MPLS BFD trigger policy is configured as host.
The next hop and the outgoing interface can be specified at the same time.rw IpAddress .1.3.6.1.4.1.2011.5.25.182.1.11 |
hwMplsBfdTriggerInterfaceThis object indicates the outgoing interface when the MPLS BFD trigger policy is configured as host.
The next hop and the outgoing interface can be specified at the same time.
In addition, you can get the correct interface index based on the ifIndex of ifTable.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.182.1.12 |
hwMplsBfdTriggerFecListNameThis object indicates the FEC list when the MPLS BFD trigger policy is configured.
The valid length of the FEC list ranges from 1 to 31 characters.
If the specified FEC list does not exist, or the specified FEC list contains no FEC node, no LSP can be triggered.
Range: 1-31rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.13 |
hwLdpVirtualTunnelFECThis object indicates the LDP virtual tunnel FEC.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.182.1.14 |
hwMplsBgpBfdCapabilityConfigThis object indicates the configuration or deletion of the MPLS BGP BFD capability.
Before the MPLS BGP BFD function is enabled, you must enable the MPLS capability and BFD capability.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.182.1.15 |
hwMplsBgpBfdMinTxThis object indicates the minimum forwarding period.
If the minimum forwarding period is set as 0 seconds,
it indicates that the minimum forwarding period returns to the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.182.1.16 |
hwMplsBgpBfdMinRxThis object indicates the minimum receiving period.
If the minimum receiving period is set as 0 seconds,
it indicates that the minimum receiving period returns to the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.182.1.17 |
hwMplsBgpBfdDetectMultiplierThis object indicates the value of the detect multiplier.
If the value of the detect multiplier is set as 0,
it indicates that the value returns to the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.182.1.18 |
hwMplsBgpBfdTriggerTunnelThis object indicates the MPLS BGP BFD triggering policy.
To configure the MPLS BGP BFD triggering policy, you must enable MPLS and BFD in advance.
Options:
1. triggerHost(1) -indicates that the MPLS BGP BFD triggering policy was configured as host.
2. triggerIpPrefix(2) -indicates that the MPLS BGP BFD triggering policy was configured as Ip Prefix.
3. disabled(3) -indicates that the MPLS BGP BFD triggering policy was not configured.
Default: disabled(3)rw Enumeration .1.3.6.1.4.1.2011.5.25.182.1.19 |
hwMplsBgpBfdTriggerTunnelIpprefixThis object indicates the IP Prefix name when the MPLS BGP BFD trigger policy is configured.
The valid length of the IP prefix name ranges from 1 to 169 characters.
Range: 1-169rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.20 |
hwMplsFecListTableThis table is used to configure or delete MPLS FEC Node.
The indexes of this table are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFecNodeNextHop. SEQUENCE OF HwMplsFecListEntry .1.3.6.1.4.1.2011.5.25.182.1.50 |
hwMplsFecListEntryAn FEC node entry of FEC list table. It can be created, or deleted.
The indexes of this entry are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFecNodeNextHop. HwMplsFecListEntry .1.3.6.1.4.1.2011.5.25.182.1.50.1 |
hwMplsFecNodeIpAddressThis object indicates the IP address of the specified FEC node. IpAddress .1.3.6.1.4.1.2011.5.25.182.1.50.1.2 |
hwMplsFecNodeInterfaceThis object indicates the outgoing interface of the FEC node.
You can get the correct interface index based on the ifIndex of ifTable. Unsigned32 .1.3.6.1.4.1.2011.5.25.182.1.50.1.3 |
hwMplsFecNodeNextHopThis object indicates the next hop of the FEC node. IpAddress .1.3.6.1.4.1.2011.5.25.182.1.50.1.4 |
hwMplsFecListRowStatusThis object indicates whether one entry of FEC list table is created or destroyed.
The value of the object can be CreatAndGo or Destroy.
If the value is set as CreatAndGo, and the entry is created in hwFecListTable, the status of the object will change into active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.50.1.51 |
hwMplsInterfaceTableThis table is used to configure or delete the MPLS capability on the interface.
The index of this table is hwMplsInterfaceIndex. SEQUENCE OF HwMplsInterfaceEntry .1.3.6.1.4.1.2011.5.25.182.1.51 |
hwMplsInterfaceEntryAn entry of the MPLS interface table, used to display and configure features on the MPLS-supporting interface.
The index of this entry is hwMplsInterfaceIndex. HwMplsInterfaceEntry .1.3.6.1.4.1.2011.5.25.182.1.51.1 |
hwMplsInterfaceIndexThis object indicates the interface index.
You can get the correct interface index based on the ifIndex of ifTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.182.1.51.1.1 |
hwMplsMtuThis object indicates the MPLS MTU of an interface.
If the value of the MPLS MTU is set as 0, it indicates that the MPLS MTU is deleted.rw Integer32 .1.3.6.1.4.1.2011.5.25.182.1.51.1.11 |
hwMplsInterfaceRowStatusThis object indicates whether one entry is created or deleted in hwMplsInterfaceTable.
The value of the object can be CreatAndGo and Destroy.
When the value is set as CreatAndGo, and the entry is created, the status of the object will change into active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.51.1.51 |
hwLdpStaticFrrInterfaceTableThis table is used to configure or delete static LDP FRR entries on the interface.
The indexes of this table are hwMplsInterfaceIndex and hwLdpStaticFrrPriority. SEQUENCE OF HwLdpStaticFrrInterfaceEntry .1.3.6.1.4.1.2011.5.25.182.1.52 |
hwLdpStaticFrrInterfaceEntryThis entry is used to display and configure the FRR-supporting interface.
The indexes of this entry are hwMplsInterfaceIndex and hwLdpStaticFrrPriority. HwLdpStaticFrrInterfaceEntry .1.3.6.1.4.1.2011.5.25.182.1.52.1 |
hwLdpStaticFrrPriorityThis object indicates the priority of a static FRR entry. Integer32 .1.3.6.1.4.1.2011.5.25.182.1.52.1.1 |
hwLdpStaticFrrNextHopThis object indicates the next hop of the static FRR.rw IpAddress .1.3.6.1.4.1.2011.5.25.182.1.52.1.11 |
hwLdpStaticFrrIpPrefixThis object indicates the IP prefix policy.
The valid prefix length ranges from 1 to 169 characters.
When the length is 0, it indicates that the policy is deleted.
Range: 1-169rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.52.1.12 |
hwLdpStaticFrrInterfaceRowStatusThis object indicates whether one entry is created or deleted in hwLdpStaticFrrInterfaceTable.
The value of the object can be CreatAndGo or Destroy.
When the value is set as CreatAndGo, and the entry is created, the status of the object will change into active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.52.1.51 |
hwLdpVirtualTunnelTableThis table specifies LDP virtual tunnel information.
The index of this table is hwLdpVirtualTunnelIndex. SEQUENCE OF HwLdpVirtualTunnelEntry .1.3.6.1.4.1.2011.5.25.182.1.53 |
hwLdpVirtualTunnelEntryAn entry of the virtual tunnel table, used to display the features associated with the virtual tunnel.
The index of this entry is hwLdpVirtualTunnelIndex. HwLdpVirtualTunnelEntry .1.3.6.1.4.1.2011.5.25.182.1.53.1 |
hwLdpVirtualTunnelIndexThis object indicates the LDP virtual tunnel index. Unsigned32 .1.3.6.1.4.1.2011.5.25.182.1.53.1.1 |
hwLdpVirtualStatusThe status of this LDP virtual tunnel.
Options:
1. up(1) -indicates that the status of this LDP virtual tunnel is Up.
2. down(2) -indicates that the status of this LDP virtual tunnel is Down.
3. testing(3) -indicates that the status of this LDP virtual tunnel is testing, this is, in some test mode.
Default: up(1)ro Enumeration .1.3.6.1.4.1.2011.5.25.182.1.53.1.2 |
hwLdpXcIndexArrayThis object indicates the xc index of the members of the LDP virtual tunnel.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.182.1.53.1.3 |
hwLdpOutSegmentIndexArrayThis object indicates the outsegment index of the members of the LDP virtual tunnel.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.182.1.53.1.4 |
hwLdpVirtualTunnelTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.182.1.54 |
hwMplsLdpVirtualTunnelUpA trap is sent when an LDP virtual tunnel goes Up. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.182.1.54.1 |
hwMplsLdpVirtualTunnelDownA trap is sent when an LDP virtual tunnel goes Down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.182.1.54.2 |
hwMplsStaticLspTableThis table is used to create or delete static LSP configurations.
The index of this table is hwMplsStaticLspName. SEQUENCE OF HwMplsStaticLspEntry .1.3.6.1.4.1.2011.5.25.182.1.55 |
hwMplsStaticLspEntryThe entry is used to show or configure static LSP.
The index of this entry is hwMplsStaticLspName. HwMplsStaticLspEntry .1.3.6.1.4.1.2011.5.25.182.1.55.1 |
hwMplsStaticLspNameThis object indicates the name of static LSP. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.55.1.1 |
hwMplsStaticLspTypeThis object is used to identify the type of static LSP.
Options:
1. ingress(1) -indicates that the type of the static LSP is ingress.
2. transit(2) -indicates that the type of the static LSP is transit.
3. egress(3) -indicates that the type of the static LSP is egress.
4. ingressBindTunnel(4) -indicates that the type of the static LSP is ingress-bind-tunnel.rw Enumeration .1.3.6.1.4.1.2011.5.25.182.1.55.1.11 |
hwMplsStaticLspInIntfIndexThis object indicates the incoming-interface index.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.182.1.55.1.12 |
hwMplsStaticLspInLabelThis object indicates the in-label.rw MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2011.5.25.182.1.55.1.13 |
hwMplsStaticLspLsrIdThis object indicates the LSR ID of ingress static LSP.rw IpAddress .1.3.6.1.4.1.2011.5.25.182.1.55.1.14 |
hwMplsStaticLspTunnelIDThis object indicates the Tunnel ID of ingress static LSP.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.182.1.55.1.15 |
hwMplsStaticLspNextHopThis object indicates the nexthop of static LSP.rw IpAddress .1.3.6.1.4.1.2011.5.25.182.1.55.1.16 |
hwMplsStaticLspOutIntfIndexThis object indicates the outgoing-interface index.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.182.1.55.1.17 |
hwMplsStaticLspOutLabelThis object indicates the out-label.rw MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2011.5.25.182.1.55.1.18 |
hwMplsStaticLspDestAddrThis object indicates the destination.rw IpAddress .1.3.6.1.4.1.2011.5.25.182.1.55.1.19 |
hwMplsStaticLspMaskLenThis object indicates the mask length.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.182.1.55.1.20 |
hwMplsStaticLspRowStatusThis object indicates whether one entry is created or deleted in hwMplsStaticLspTable.
The value of the object can be CreateAndGo or Destroy.
When the value is set as CreateAndGo, and the entry is created, the status of the object will change into active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.182.1.55.1.51 |
hwMplsLsrExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.182.2 |
hwMplsLsrExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.182.2.1 |
hwMplsLsrExtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.182.2.2 |