HUAWEI-LOOPDETECT-MIB
AI MIB Summary
The HUAWEI-LOOPDETECT-MIB provides SNMP access to monitor the operational status and configuration parameters of the Layer 2 loop detection mechanism on Huawei networking devices. It exposes specific metrics regarding loop detection enablement states, triggered alarm thresholds, and the current status of loop prevention actions across managed interfaces.
The LoopDetect MIB module is defined to indicate loop-detect function of Huawei Technologies co.,Ltd.
Main OID:
hwLoopDetectMIB.1.3.6.1.4.1.2011.25.180
18
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
hwDatacomm OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25 |
hwLoopDetectMIBThe LoopDetect MIB module is defined to indicate loop-detect function of Huawei Technologies co.,Ltd. MODULE-IDENTITY .1.3.6.1.4.1.2011.25.180 |
hwLoopDetectCfgTableIndicates the table that shows the loop detect configuration and blocking state. SEQUENCE OF HwLoopDetectCfgEntry .1.3.6.1.4.1.2011.25.180.1 |
hwLoopDetectCfgEntryIndicates the entries about the loop detect configuration and blocking state. HwLoopDetectCfgEntry .1.3.6.1.4.1.2011.25.180.1.1 |
hwLoopDetectCfgPortIndexIndicates the interface index. Integer32 .1.3.6.1.4.1.2011.25.180.1.1.1 |
hwLoopDetectCfgPortNameIndicates the interface name.ro OCTET STRING .1.3.6.1.4.1.2011.25.180.1.1.2 |
hwLoopDetectCfgIndicates whether the loop detect function is enabled.ro Integer32 .1.3.6.1.4.1.2011.25.180.1.1.3 |
hwLoopDetectCfgBlockIndicates whether the interface can enter the blocking state after a loop is detected.ro Integer32 .1.3.6.1.4.1.2011.25.180.1.1.4 |
hwLoopDetectCfgBlockTimeIndicates the interval that is used to judge whether the loop disappears and the blocking state ends.ro Integer32 .1.3.6.1.4.1.2011.25.180.1.1.5 |
hwLoopDetectCfgPriorityIndicates the priority in loop detect.ro Integer32 .1.3.6.1.4.1.2011.25.180.1.1.6 |
hwLoopDetectCfgTriggerIndicates whether the function of immediate interface Down/Up is triggered after a loop is detected.ro Integer32 .1.3.6.1.4.1.2011.25.180.1.1.7 |
hwLoopDetectCfgStaIdentify the interface that is blocked after a loop is detected.ro Integer32 .1.3.6.1.4.1.2011.25.180.1.1.8 |
hwLoopDetectTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.180.2 |
hwLoopDetectEnabledThe loop detect function is enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.180.2.1 |
hwLoopDetectDisabledThe loop detect function is disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.180.2.2 |
hwLoopDetectBlockedThe interface is blocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.180.2.3 |
hwLoopDetectUnBlockedThe interface is unblocked. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.25.180.2.4 |
hwLoopDetectGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.25.180.3 |