HUAWEI-POS-MIB
AI MIB Summary
The HUAWEI-POS-MIB module enables monitoring and management of Packet over SONET/SDH (POS) interfaces on Huawei networking equipment, specifically tracking physical layer statistics such as interface status, error counters, and throughput metrics for serial WAN links.
The POS MIB module is used to manage POS-Access.
Main OID:
pos.1.3.6.1.4.1.2011.2.33.8
80
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
80 total| Object Name |
|---|
posThe POS MIB module is used to manage POS-Access. MODULE-IDENTITY .1.3.6.1.4.1.2011.2.33.8 |
posAppTableThe table to get and set the application informatin. SEQUENCE OF POSAppEntry .1.3.6.1.4.1.2011.2.33.8.1 |
posAppEntryThe content of posAppTable. POSAppEntry .1.3.6.1.4.1.2011.2.33.8.1.1 |
posAppIdThe ID of application.ro INTEGER .1.3.6.1.4.1.2011.2.33.8.1.1.1 |
posAppConnectModeThe connect mode of application. If the router and unix are connected by TCP protocol, the connect mode of application is tcp. If the router and unix are connected by async interface, the connect mode of application is flow. If the router is used as POSPAD device, the connect mode of application is pad.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.1.1.2 |
posAppStateThe state of application.ro Enumeration .1.3.6.1.4.1.2011.2.33.8.1.1.3 |
posAppIfIndexThe interface index of the application whose connect mode is flow or pad.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.1.1.4 |
posAppHostIPThe destination IP Address of application. Used for the application whose connect mode is tcp.rw IpAddress .1.3.6.1.4.1.2011.2.33.8.1.1.5 |
posAppPortThe destination port of application. Used for the application whose connect mode is tcp.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.1.1.6 |
posAppSourceIpThe source IP Address of application. Used for the application whose connect mode is tcp.rw IpAddress .1.3.6.1.4.1.2011.2.33.8.1.1.7 |
posAppRecvPacCounterThe number of packets received by the application.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.1.1.8 |
posAppErrPacCounterThe number of error packets received by the application.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.1.1.9 |
posAppDistrErrCounterThe number of packets that could not be sent to POS.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.1.1.10 |
posAppBuffedCounterThe number of packets stored in the buffer of application.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.1.1.11 |
posAppDiscardedCounterThe number of packets discarded by the application.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.1.1.12 |
posAppDebugThe debugging switch of application.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.1.1.13 |
posAppRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.33.8.1.1.14 |
posAppX121AddrThe destination X121 Address of application which is an octet string made up of numeric. Used for the application whose connect mode is pad.rw OCTET STRING .1.3.6.1.4.1.2011.2.33.8.1.1.15 |
posInterTableThe table to get and set the POS-Interface informatin. SEQUENCE OF POSInterEntry .1.3.6.1.4.1.2011.2.33.8.2 |
posInterEntryThe content of posInterTable. POSInterEntry .1.3.6.1.4.1.2011.2.33.8.2.1 |
posPosIdThe ID of the POS-Interface.ro INTEGER .1.3.6.1.4.1.2011.2.33.8.2.1.1 |
posPosIfIndexThe interface index of the POS-Interface whose type is fcm, asy or pad-client.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.2.1.2 |
posPosConnectStateThe state of the POS-Interface.ro Enumeration .1.3.6.1.4.1.2011.2.33.8.2.1.3 |
posPosRecvPacCounterThe number of packets received by the POS-Interface.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.2.1.4 |
posPosErrPacCounterThe number of error packets received by the POS-Interface.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.2.1.5 |
posPosMapErrCounterThe number of packets that could not be sent to application.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.2.1.6 |
posPosBuffedCounterThe number of packets stored in the buffer of the POS-Interface.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.2.1.7 |
posPosDiscardedCounterThe number of packets discarded by the POS-Interface.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.2.1.8 |
posPosInterDebugThe debugging switch of the POS-Interface.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.2.1.9 |
posPosInterRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.33.8.2.1.10 |
posPosInterTypeThe type of interface. The POS-Access mode has four types: FCM-Access, ASYNC-Access, simulating POSPAD device, POSPAD-Access. FCM-Access mode means POS and router are connected through PSTN. In this case, posPosInterType should be set to fcm. ASYNC-Access mode means POS and router are connected by asynchronous cable. In this case, posPosInterType should be set to asy. Simulating POSPAD device means router connects POS through asynchronous cable and connects another router whose connect mode is pad-server through X.25 network. In this case, posPosInterType should be set to pad-client. POSPAD-Access mode means router connects POSPAD device through X.25 network. In this case, posPosInterType is pad-server. The posPosInterType can't be set to pad-server. It is autogenerated when POSPAD device initiates a connection to the router.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.2.1.11 |
posMapTableThe table to get and set the informatin of mapping relation of destination and application. SEQUENCE OF POSMapEntry .1.3.6.1.4.1.2011.2.33.8.3 |
posMapEntryThe content of posMapTable. POSMapEntry .1.3.6.1.4.1.2011.2.33.8.3.1 |
posMapDesThe destination code of the mapping item. If the value is -1, it is the default item of mapping relation.rw INTEGER(-1..65535) .1.3.6.1.4.1.2011.2.33.8.3.1.1 |
posMapAppNumberThe application index of the mapping item.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.3.1.2 |
posMapRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.33.8.3.1.3 |
posAsyAppTableThe table to get and set the asynchronous-application interface information. SEQUENCE OF POSAsyAppEntry .1.3.6.1.4.1.2011.2.33.8.4 |
posAsyAppEntryThe content of posAsyAppTable. POSAsyAppEntry .1.3.6.1.4.1.2011.2.33.8.4.1 |
posAsyAppIfIndexThe interface index of asynchronous-application.ro INTEGER .1.3.6.1.4.1.2011.2.33.8.4.1.1 |
posAsyAppRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.33.8.4.1.2 |
posFCMTableThe table to get the information of FCM interface. SEQUENCE OF POSFCMEntry .1.3.6.1.4.1.2011.2.33.8.5 |
posFCMEntryThe content of posFCMTable. POSFCMEntry .1.3.6.1.4.1.2011.2.33.8.5.1 |
posFCMIfIndexThe index of FCM interface.ro INTEGER .1.3.6.1.4.1.2011.2.33.8.5.1.1 |
posFCMTimeoutCounterThe number that modem was hung up for timeout.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.5.1.3 |
posFCMConnectFailCounterThe number that modem could not handshake successfully.ro Counter32 .1.3.6.1.4.1.2011.2.33.8.5.1.4 |
posAppSumThe total of configued applications.ro INTEGER .1.3.6.1.4.1.2011.2.33.8.6 |
posInterSumThe total of configued POS-Interfaces.ro INTEGER .1.3.6.1.4.1.2011.2.33.8.7 |
posEnableTo enable or diable pos-server.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.8 |
posAppDebugAllTo open or close the debugging switch of all applications.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.9 |
posPosDebugAllTo open or close the debugging switch of all POS-Interfaces.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.10 |
posClearPacCounterTo reset all packet counters of all applicaions and POS-Interfaces.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.11 |
posClearFCMCounterTo clear all counters of all FCM interfaces.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.12 |
posEnableTrapTo enable or disable trap switch.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.13 |
posFCMAnswerTimeFCM answer time, unit:ms.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.14 |
posFCMTradeTimeFCM trade time, unit:ms.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.15 |
posFCMPacketIntervalFCM packet interval time, unit:ms.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.16 |
posTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.33.8.17 |
posAppNotReadyTrapThe agent will send a trap when the application whose state is linked isn't ready to send or receive data. Only used for the application whose connect mode is tcp. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.1 |
posAppConnectFailTrapThe agent will send a trap if router can not connect to the application. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.2 |
posAppStateChangeTrapThe agent will send a trap when the state of the application is changed to down or kept. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.3 |
posAppNotConfigedTrapThe agent will send a trap if the application isn't configured. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.4 |
posAppBuffOverFlowTrapThe agent will send a trap if the application buffer is overflowed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.5 |
posAppDebugOpenTrapThe agent will send a trap if the debugging switch of application is open. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.6 |
posAppDebugAllOpenTrapThe agent will send a trap if the all debugging switches of application are open. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.7 |
posInterBuffOverFlowTrapThe agent will send a trap if the distributing buffer is overflowed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.8 |
posInterStateChangeTrapThe agent will send a trap if the state of POS-Interface is changed to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.9 |
posInterDebugOpenTrapThe agent will send a trap if the debug of POS-Interface is open. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.10 |
posInterDebugAllOpenTrapThe agent will send a trap if the all debugs of POS-Interface are open. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.11 |
posFCMTimeoutTrapThe agent will send a trap if the modem is hung up for timeout. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.12 |
posFCMConnectFailTrapThe agent will send a trap if the handshaking of modems is not successful. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.13 |
posClearPacketCounterThe agent will send a trap when the packet counter of the POS application and interface is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.14 |
posClearFcmCounterThe agent will send a trap when the FCM counter is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.33.8.17.15 |
posPadWaitTimeThe time that POS-Interface needs to wait to receive another packet, unit:ms. It may be configured when router is used as POSPAD device. In other cases, It is useless.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.18 |
posPadIdleTimeoutIf these is no packet transmitting through the time, the connection of POSPAD device and router whose connect mode is pad-server will be cut off. Unit:s.rw INTEGER .1.3.6.1.4.1.2011.2.33.8.19 |
posPadPacTypeThe type of packet.Between POSPAD device and router whose connect mode is pad-server, there are two types of packet. One is synchronous, the other is asynchronous.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.20 |
posPadCheckSCharTo enable or disable the checking of 10 04 characters in packet. It is used for the router which is used as POSPAD device. When the value is disable, it will check packet that just includes 10 04 charaters. If there are 10 04 packet, the router which is used as POSPAD device will disconnect from POSPAD-access router. When the value is enable, it will check 10 04 characters in packet. If there are 10 04 characters in packet, the router which is used as POSPAD device will disconnect from POSPAD-access router.rw Enumeration .1.3.6.1.4.1.2011.2.33.8.21 |
posPadTableThe table to enable or disable POSPAD-Access function under serial interface. SEQUENCE OF POSPadEntry .1.3.6.1.4.1.2011.2.33.8.22 |
posPadEntryThe content of posPadTable. POSPadEntry .1.3.6.1.4.1.2011.2.33.8.22.1 |
posPadIfIndexThe index of serial interface. INTEGER .1.3.6.1.4.1.2011.2.33.8.22.1.1 |
posPadRowStatusThe status of row. Only support active, CreateAndGo and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.33.8.22.1.2 |