HUAWEI-LswQos-MIB
AI MIB Summary
The HUAWEI-LswQos-MIB module provides SNMP-based monitoring and management of Quality of Service (QoS) policies and Access Control List (ACL) configurations on Huawei S-series and other compatible Layer 2/Layer 3 switching platforms. It exposes specific counters and status variables for traffic classification, queue statistics, packet dropping rates, and ACL rule hit counts to facilitate real-time bandwidth control and security policy enforcement.
Module node for qos and acl.
Main OID:
hwLswQosAclMib.1.3.6.1.4.1.2011.2.23.1.16
370
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
370 total| Object Name |
|---|
hwLswQosAclMibModule node for qos and acl. MODULE-IDENTITY .1.3.6.1.4.1.2011.2.23.1.16 |
hwLswQosMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.23.1.16.2 |
hwPriorityTrustModePriority type of inbound queue.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.1 |
hwPortMonitorBothIfIndexThe ifIndex of in/out monitor port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.2 |
hwQueueTableQueue table which contains queue entry. SEQUENCE OF HwQueueEntry .1.3.6.1.4.1.2011.2.23.1.16.2.3 |
hwQueueEntryThe configuration information of queue. HwQueueEntry .1.3.6.1.4.1.2011.2.23.1.16.2.3.1 |
hwQueueIfIndexifIndex of port.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.1 |
hwQueueScheduleModeThe mode of the queue schedule.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.2 |
hwQueueWeight1If queue mode is wfq, then hwQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hwQueueWeight1 represent the weight of queue 1.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.3 |
hwQueueWeight2If queue mode is wfq, then hwQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hwQueueWeight2 represent the weight of queue 2.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.4 |
hwQueueWeight3If queue mode is wfq, then hwQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hwQueueWeight3 represent the weight of queue 3.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.5 |
hwQueueWeight4If queue mode is wfq, then hwQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hwQueueWeight4 represent the weight of queue 4.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.6 |
hwQueueMaxDelayrw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.7 |
hwQueueWeight5If queue mode is wfq, then hwQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hwQueueWeight5 represent the weight of queue 5.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.8 |
hwQueueWeight6If queue mode is wfq, then hwQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hwQueueWeight6 represent the weight of queue 6.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.9 |
hwQueueWeight7If queue mode is wfq, then hwQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hwQueueWeight7 represent the weight of queue 7.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.10 |
hwQueueWeight8If queue mode is wfq, then hwQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hwQueueWeight8 represent the weight of queue 8.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.3.1.11 |
hwRateLimitTableRate limit table which contains limit entry. SEQUENCE OF HwRateLimitEntry .1.3.6.1.4.1.2011.2.23.1.16.2.4 |
hwRateLimitEntryThe configuration information of the rate-limited port. HwRateLimitEntry .1.3.6.1.4.1.2011.2.23.1.16.2.4.1 |
hwRateLimitAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.1 |
hwRateLimitIfIndexifIndex of the rate-limited port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.2 |
hwRateLimitVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.3 |
hwRateLimitDirectionDirection of the rate-limited port.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.4 |
hwRateLimitUserAclNumThe number of user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.5 |
hwRateLimitUserAclRuleThe number of user acl-rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.6 |
hwRateLimitIpAclNumThe number of Ip acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.7 |
hwRateLimitIpAclRuleThe number of Ip acl-rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.8 |
hwRateLimitLinkAclNumThe number of link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.9 |
hwRateLimitLinkAclRuleThe number of link acl-rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.10 |
hwRateLimitTargetRateMbpsTarget rate: Mbps.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.11 |
hwRateLimitTargetRateKbpsTarget rate: Kbps.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.12 |
hwRateLimitPeakRatePeak rate of the rate-limited port.rw INTEGER(0|64..8388608) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.13 |
hwRateLimitCIRCIR of the rate-limited port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.14 |
hwRateLimitCBSBurst traffic of the rate-limited port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.15 |
hwRateLimitEBSExcess burst traffic of the rate-limited port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.16 |
hwRateLimitPIRPIR of the rate-limited port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.17 |
hwRateLimitConformLocalPreConform local pre.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.18 |
hwRateLimitConformActionTypeConform action type.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.19 |
hwRateLimitExceedActionTypeExceed action type.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.20 |
hwRateLimitExceedDscpExceed DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)rw INTEGER(0..63|255) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.21 |
hwRateLimitRuntimeRuntime.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.22 |
hwRateLimitRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.23 |
hwRateLimitExceedCosExceeding COS of rate-limited port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.24 |
hwRateLimitConformCosIf the user choose remark-cos value of the hwRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.25 |
hwRateLimitConformDscpIf the user choose remark-dscp value of the hwRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)rw INTEGER(0..63|255) .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.26 |
hwRateLimitMeterStatByteCountThe counter of conform byte.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.27 |
hwRateLimitMeterStatByteXCountThe counter of exceed byte.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.28 |
hwRateLimitMeterStatStateThe status of meter statistic.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.4.1.29 |
hwPriorityTableThe priority table which contains priority entry. SEQUENCE OF HwPriorityEntry .1.3.6.1.4.1.2011.2.23.1.16.2.5 |
hwPriorityEntryThe configuration information of priority. HwPriorityEntry .1.3.6.1.4.1.2011.2.23.1.16.2.5.1 |
hwPriorityAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.1 |
hwPriorityIfIndexifIndex of the port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.2 |
hwPriorityVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.3 |
hwPriorityDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.4 |
hwPriorityUserAclNumThe number of user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.5 |
hwPriorityUserAclRuleThe subitem of the user acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.6 |
hwPriorityIpAclNumThe number of Ip acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.7 |
hwPriorityIpAclRuleThe subitem of the IP acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.8 |
hwPriorityLinkAclNumThe number of Link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.9 |
hwPriorityLinkAclRuleThe subitem of the link acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.10 |
hwPriorityDscpSet DSCP Value. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)rw INTEGER(0..63|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.11 |
hwPriorityIpPreSet Ip precedence.rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.12 |
hwPriorityIpPreFromCosSet Ip precedence according to vlan priority.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.13 |
hwPriorityCosSet vlan priority.rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.14 |
hwPriorityCosFromIpPreSet vlan priority according to IP precedence.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.15 |
hwPriorityLocalPreSet local precedence.rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.16 |
hwPriorityPolicedServiceTypeThe service type of proliced Priority.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.17 |
hwPriorityPolicedServiceDscpThe service Dscp of proliced Priority.rw INTEGER(0..63|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.18 |
hwPriorityPolicedServiceExpThe service Exp of proliced Priority.rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.19 |
hwPriorityPolicedServiceCosThe service COS of proliced Priority.rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.20 |
hwPriorityPolicedServiceLoaclPreThe service local pre of proliced Priority.rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.21 |
hwPriorityPolicedServiceDropPriorityThe service drop priority of proliced Priority.rw INTEGER(0..2|255) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.22 |
hwPriorityRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.23 |
hwPriorityRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.5.1.24 |
hwRedirectTableRedirect table which contains rediect entry. SEQUENCE OF HwRedirectEntry .1.3.6.1.4.1.2011.2.23.1.16.2.6 |
hwRedirectEntryConfiguration information of redirection. HwRedirectEntry .1.3.6.1.4.1.2011.2.23.1.16.2.6.1 |
hwRedirectAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.1 |
hwRedirectIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.2 |
hwRedirectVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.3 |
hwRedirectDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.4 |
hwRedirectUserAclNumThe number of the user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.5 |
hwRedirectUserAclRuleThe subitem of the user acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.6 |
hwRedirectIpAclNumThe num of the IP acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.7 |
hwRedirectIpAclRuleThe subitem of the IP acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.8 |
hwRedirectLinkAclNumThe num of the link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.9 |
hwRedirectLinkAclRuleThe subitem of the link acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.10 |
hwRedirectToCpuRedirect to cpu.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.11 |
hwRedirectToIfIndexThe ifIndex of port to be redirect to.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.12 |
hwRedirectToNextHop1rw IpAddress .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.13 |
hwRedirectToNextHop2rw IpAddress .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.14 |
hwRedirectRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.15 |
hwRedirectRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.16 |
hwRedirectToSlotNoThe slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.17 |
hwRedirectRemarkedDSCPDSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.rw INTEGER(0..63|255) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.18 |
hwRedirectRemarkedPriThe priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.19 |
hwRedirectRemarkedTosThe TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.rw INTEGER(0..15|255) .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.20 |
hwRedirectToNextHop3The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function.rw IpAddress .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.21 |
hwRedirectTargetVlanIDThe destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.22 |
hwRedirectModeThe node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.23 |
hwRedirectToNestedVlanIDThe nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.24 |
hwRedirectToModifiedVlanIDThe new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.6.1.25 |
hwStatisticTableStatistic table which contains statistic entry. SEQUENCE OF HwStatisticEntry .1.3.6.1.4.1.2011.2.23.1.16.2.7 |
hwStatisticEntryConfiguration about statistic information. HwStatisticEntry .1.3.6.1.4.1.2011.2.23.1.16.2.7.1 |
hwStatisticAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.1 |
hwStatisticIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.2 |
hwStatisticVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.3 |
hwStatisticDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.4 |
hwStatisticUserAclNumThe number of the user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.5 |
hwStatisticUserAclRuleThe subitem of the user acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.6 |
hwStatisticIpAclNumThe number of the IP acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.7 |
hwStatisticIpAclRuleThe subitem of the IP acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.8 |
hwStatisticLinkAclNumThe number of the link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.9 |
hwStatisticLinkAclRuleThe subitem of the link acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.10 |
hwStatisticRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.11 |
hwStatisticPacketCountThe counter of the packets which is matched.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.12 |
hwStatisticByteCountThe counter of the byte which is matched.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.13 |
hwStatisticCountClearClear the counter of the packets.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.14 |
hwStatisticRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.15 |
hwStatisticPacketXCountThe counter of the outprofile packets.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.16 |
hwStatisticByteXCountThe counter of the outprofile bytes.ro Counter64 .1.3.6.1.4.1.2011.2.23.1.16.2.7.1.17 |
hwMirrorTableMirror table which contains mirror entry. SEQUENCE OF HwMirrorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.8 |
hwMirrorEntryConfiguration information to be mirrored. HwMirrorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.8.1 |
hwMirrorAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.1 |
hwMirrorIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.2 |
hwMirrorVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.3 |
hwMirrorDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.4 |
hwMirrorUserAclNumThe number of the user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.5 |
hwMirrorUserAclRuleThe subitem of the user acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.6 |
hwMirrorIpAclNumThe subitem of the user acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.7 |
hwMirrorIpAclRuleThe subitem of the IP acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.8 |
hwMirrorLinkAclNumThe number of the link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.9 |
hwMirrorLinkAclRuleThe subitem of the link acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.10 |
hwMirrorToIfIndexThe ifIndex of port that to be mirrored to.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.11 |
hwMirrorToCpuMirror to cpu.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.12 |
hwMirrorRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.13 |
hwMirrorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.14 |
hwMirrorToGroupThe destination of stream-based mirroring is the mirroring group.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.8.1.15 |
hwPortMirrorTablePort Mirror. SEQUENCE OF HwPortMirrorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.9 |
hwPortMirrorEntryConfiguration information of port mirroring. HwPortMirrorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.9.1 |
hwPortMirrorIfIndexThe ifIndex of mirror port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.9.1.1 |
hwPortMirrorDirectionThe direction of mirror port.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.9.1.2 |
hwPortMirrorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.9.1.3 |
hwLineRateTableLine Rate. SEQUENCE OF HwLineRateEntry .1.3.6.1.4.1.2011.2.23.1.16.2.10 |
hwLineRateEntryConfiguration information of line-rate port. HwLineRateEntry .1.3.6.1.4.1.2011.2.23.1.16.2.10.1 |
hwLineRateIfIndexThe ifIndex of port of line rate.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.10.1.1 |
hwLineRateDirectionThe direction of line rate.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.10.1.2 |
hwLineRateValueThe value of the line-rate.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.10.1.3 |
hwLineRateRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.10.1.4 |
hwBandwidthTableBandwidth. SEQUENCE OF HwBandwidthEntry .1.3.6.1.4.1.2011.2.23.1.16.2.11 |
hwBandwidthEntryConfiguration information of bandwidth of port. HwBandwidthEntry .1.3.6.1.4.1.2011.2.23.1.16.2.11.1 |
hwBandwidthAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.1 |
hwBandwidthIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.2 |
hwBandwidthVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.3 |
hwBandwidthDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.4 |
hwBandwidthIpAclNumThe number of Ip acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.5 |
hwBandwidthIpAclRuleThe subitem of ip acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.6 |
hwBandwidthLinkAclNumThe number of link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.7 |
hwBandwidthLinkAclRuleThe subitem of link acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.8 |
hwBandwidthMinGuaranteedWidthThe min width which is guaranteed.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.9 |
hwBandwidthMaxGuaranteedWidthThe max width which is guaranteed.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.10 |
hwBandwidthWeightWeight of bandwidth.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.11 |
hwBandwidthRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.12 |
hwBandwidthRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.11.1.13 |
hwRedTableRed table which contains RED entry. SEQUENCE OF HwRedEntry .1.3.6.1.4.1.2011.2.23.1.16.2.12 |
hwRedEntryConfiguration information of RED. HwRedEntry .1.3.6.1.4.1.2011.2.23.1.16.2.12.1 |
hwRedAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.1 |
hwRedIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.2 |
hwRedVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.3 |
hwRedDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.4 |
hwRedIpAclNumThe num of Ip acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.5 |
hwRedIpAclRuleThe subitem of Ip acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.6 |
hwRedLinkAclNumThe number of link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.7 |
hwRedLinkAclRuleThe subitem of link acl.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.8 |
hwRedStartQueueLenThe length of Starting queue.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.9 |
hwRedStopQueueLenThe length of stopping queue.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.10 |
hwRedProbabilityProbability.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.11 |
hwRedRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.12 |
hwRedRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.12.1.13 |
hwMirrorGroupTableMirror Group. SEQUENCE OF HwMirrorGroupEntry .1.3.6.1.4.1.2011.2.23.1.16.2.13 |
hwMirrorGroupEntryConfiguration information of mirroring group. HwMirrorGroupEntry .1.3.6.1.4.1.2011.2.23.1.16.2.13.1 |
hwMirrorGroupIDGroup ID of mirroring group.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.13.1.1 |
hwMirrorGroupDirectionDirection of data stream which would be mirrored.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.13.1.2 |
hwMirrorGroupMirrorIfIndexListifIndex list of source port.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.16.2.13.1.3 |
hwMirrorGroupMonitorIfIndexifIndex of destination port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.13.1.4 |
hwMirrorGroupRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.13.1.5 |
hwFlowtempTableFlow-template table which contains flow-template entry. SEQUENCE OF HwFlowtempEntry .1.3.6.1.4.1.2011.2.23.1.16.2.14 |
hwFlowtempEntryConfiguration information of flow-template. HwFlowtempEntry .1.3.6.1.4.1.2011.2.23.1.16.2.14.1 |
hwFlowtempIndexIndex of flow template.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.1 |
hwFlowtempIpProtocolprotocol-type of IP packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.2 |
hwFlowtempTcpFlagThe flag of Tcp paceket.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.3 |
hwFlowtempSPortThe port of source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.4 |
hwFlowtempDPortThe port of destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.5 |
hwFlowtempIcmpTypeThe type of Icmp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.6 |
hwFlowtempIcmpCodeThe code of Icmp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.7 |
hwFlowtempFragmentThe flag of Fragment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.8 |
hwFlowtempDscpDscp of IP packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.9 |
hwFlowtempIpPreThe Precedence of Ip packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.10 |
hwFlowtempTosTos of IP packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.11 |
hwFlowtempSIpThe Ip of source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.12 |
hwFlowtempSIpMaskThe mask of source-Ip.rw IpAddress .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.13 |
hwFlowtempDIpThe Ip of destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.14 |
hwFlowtempDIpMaskThe mask of destination-Ip.rw IpAddress .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.15 |
hwFlowtempEthProtocolProtocol type of Ethernet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.16 |
hwFlowtempSMacThe Mac of source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.17 |
hwFlowtempSMacMaskThe mask of source-Mac.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.18 |
hwFlowtempDMacThe mac of destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.19 |
hwFlowtempDMacMaskThe mask of destination-Mac.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.20 |
hwFlowtempVpnVpnrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.21 |
hwFlowtempRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.22 |
hwFlowtempVlanIdSource VLAN ID.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.23 |
hwFlowtempCos802.1P priority.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.14.1.24 |
hwFlowtempEnableTableThe table of flow-template. SEQUENCE OF HwFlowtempEnableEntry .1.3.6.1.4.1.2011.2.23.1.16.2.15 |
hwFlowtempEnableEntryEnable entry of flow-template. HwFlowtempEnableEntry .1.3.6.1.4.1.2011.2.23.1.16.2.15.1 |
hwFlowtempEnableIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.15.1.1 |
hwFlowtempEnableVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.15.1.2 |
hwFlowtempEnableFlowtempIndexThe index of Flowtemp table.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.15.1.3 |
hwTrafficShapeTableThe traffic-shape table which contains traffic-shape entry. SEQUENCE OF HwTrafficShapeEntry .1.3.6.1.4.1.2011.2.23.1.16.2.16 |
hwTrafficShapeEntryConfiguration information of traffic-shape. HwTrafficShapeEntry .1.3.6.1.4.1.2011.2.23.1.16.2.16.1 |
hwTrafficShapeIfIndexIfIdex of port.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.16.1.1 |
hwTrafficShapeQueueIdID of queue which would be shaped.rw INTEGER(0..7|255) .1.3.6.1.4.1.2011.2.23.1.16.2.16.1.2 |
hwTrafficShapeMaxRateThe max rate.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.16.1.3 |
hwTrafficShapeBurstSizeThe size of burst.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.16.1.4 |
hwTrafficShapeBufferLimitThe limit of buffer.rw INTEGER(0|16..8000) .1.3.6.1.4.1.2011.2.23.1.16.2.16.1.5 |
hwTrafficShapeRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.16.1.6 |
hwPortQueueTableThe port-queue table which contains port-queue entry. SEQUENCE OF HwPortQueueEntry .1.3.6.1.4.1.2011.2.23.1.16.2.17 |
hwPortQueueEntryConfiguration information of port-queue. HwPortQueueEntry .1.3.6.1.4.1.2011.2.23.1.16.2.17.1 |
hwPortQueueIfIndexifIndex of port.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.17.1.1 |
hwPortQueueQueueIDID of port-queue.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.17.1.2 |
hwPortQueueWrrPriorityThe priority of Wrr.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.17.1.3 |
hwPortQueueWeightThe weight of this queue.rw INTEGER(0|1..255) .1.3.6.1.4.1.2011.2.23.1.16.2.17.1.4 |
hwDropModeTableThe drop-mode table which contains drop-mode entry. SEQUENCE OF HwDropModeEntry .1.3.6.1.4.1.2011.2.23.1.16.2.18 |
hwDropModeEntryConfiguration information of the drop-mode. HwDropModeEntry .1.3.6.1.4.1.2011.2.23.1.16.2.18.1 |
hwDropModeIfIndexifIndex of port.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.18.1.1 |
hwDropModeModeMode.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.18.1.2 |
hwDropModeWredIndexThe index of Wred table.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.18.1.3 |
hwWredTableThe Wred table which contains wred Entry. SEQUENCE OF HwWredEntry .1.3.6.1.4.1.2011.2.23.1.16.2.19 |
hwWredEntryConfiguration information of Wred. HwWredEntry .1.3.6.1.4.1.2011.2.23.1.16.2.19.1 |
hwWredIndexIndex of wred.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.1 |
hwWredQueueIdQueue ID.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.2 |
hwWredGreenMinThresholdThe min threshold of Green.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.3 |
hwWredGreenMaxThresholdThe max threshold of Greem.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.4 |
hwWredGreenMaxProbThe max prob of Green.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.5 |
hwWredYellowMinThresholdThe min threshold of Yellow.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.6 |
hwWredYellowMaxThresholdThe max threshold of Yellow.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.7 |
hwWredYellowMaxProbThe Prob threshold of Yellow.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.8 |
hwWredRedMinThresholdThe min threshold of Red.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.9 |
hwWredRedMaxThresholdThe max threshold of Red.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.10 |
hwWredRedMaxProbThe max prob of Red.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.11 |
hwWredExponentExponent.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.19.1.12 |
hwCosToLocalPrecedenceMapTableTable of map of the COS to local-precedence. SEQUENCE OF HwCosToLocalPrecedenceMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.20 |
hwCosToLocalPrecedenceMapEntryConfiguration information of map of the COS to local precedence. HwCosToLocalPrecedenceMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.20.1 |
hwCosToLocalPrecedenceMapCosIndexIndex of the map.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.20.1.1 |
hwCosToLocalPrecedenceMapLocalPrecedenceValueValue of local precedence.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.20.1.2 |
hwCosToDropPrecedenceMapTableThe table of map of COS to drop-precedence. SEQUENCE OF HwCosToDropPrecedenceMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.21 |
hwCosToDropPrecedenceMapEntryConfiguration information of the map of the COS to drop-precedence. HwCosToDropPrecedenceMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.21.1 |
hwCosToDropPrecedenceMapCosIndexIndex of the map.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.21.1.1 |
hwCosToDropPrecedenceMapDropPrecedenceValueValue of drop-precedence.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.21.1.2 |
hwDscpMapTableTable of dscp map. SEQUENCE OF HwDscpMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.22 |
hwDscpMapEntryConfiguration information of Dscp map. HwDscpMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.22.1 |
hwDscpMapConformLevelConformable level of Dscp-map.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.22.1.1 |
hwDscpMapDscpIndexIndex of dscp.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.22.1.2 |
hwDscpMapDscpValueValue of Dscp.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.22.1.3 |
hwDscpMapExpValueExp value.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.22.1.4 |
hwDscpMapCosValueCOS value.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.22.1.5 |
hwDscpMapLocalPrecedenceThe precedence of local.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.22.1.6 |
hwDscpMapDropPrecedenceThe precedence of Drop.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.22.1.7 |
hwExpMapTableThe table of Exp-map SEQUENCE OF HwExpMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.23 |
hwExpMapEntryConfiguration information of Exp-map. HwExpMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.23.1 |
hwExpMapConformLevelConformable level of Exp-map.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.23.1.1 |
hwExpMapExpIndexIndex of Exp.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.23.1.2 |
hwExpMapDscpValueDscp value.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.23.1.3 |
hwExpMapExpValueExp value.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.23.1.4 |
hwExpMapCosValueCOS Value.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.23.1.5 |
hwExpMapLocalPrecedenceThe precedence of local.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.23.1.6 |
hwExpMapDropPrecedenceThe precedence of Drop.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.23.1.7 |
hwLocalPrecedenceMapTableThe table of local-precedence map. SEQUENCE OF HwLocalPrecedenceMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.24 |
hwLocalPrecedenceMapEntryConfiguraion information of local-precedence map. HwLocalPrecedenceMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.24.1 |
hwLocalPrecedenceMapConformLevelConformable level of local-precedence map.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.24.1.1 |
hwLocalPrecedenceMapLocalPrecedenceIndexIndex of local-precedence.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.24.1.2 |
hwLocalPrecedenceMapCosValueCOS value.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.24.1.3 |
hwPortWredTableThe table of PortWred. SEQUENCE OF HwPortWredEntry .1.3.6.1.4.1.2011.2.23.1.16.2.25 |
hwPortWredEntryConfiguration information of port Wred. HwPortWredEntry .1.3.6.1.4.1.2011.2.23.1.16.2.25.1 |
hwPortWredIfIndexifIndex of port.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.25.1.1 |
hwPortWredQueueIDID of port-Wred queue.ro INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.25.1.2 |
hwPortWredQueueStartLengthQueue length.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.25.1.3 |
hwPortWredQueueProbabilityProbability.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.25.1.4 |
hwMirroringGroupTableThe table of MirrorGroup. SEQUENCE OF HwMirroringGroupEntry .1.3.6.1.4.1.2011.2.23.1.16.2.26 |
hwMirroringGroupEntryConfiguration information of MirrorGroup. HwMirroringGroupEntry .1.3.6.1.4.1.2011.2.23.1.16.2.26.1 |
hwMirroringGroupIDGroupID. INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.26.1.1 |
hwMirroringGroupTypeGroupType.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.26.1.2 |
hwMirroringGroupStatusMirroringGroup status.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.26.1.3 |
hwMirroringGroupRowStatusRowStatus, Now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.26.1.4 |
hwMirroringGroupMirrorTableMirroringGroup mirroring-port information. SEQUENCE OF HwMirroringGroupMirrorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.27 |
hwMirroringGroupMirrorEntryMirroringGroup mirroring-port information. HwMirroringGroupMirrorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.27.1 |
hwMirroringGroupMirrorInboundIfIndexListInbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList. Example A: hwMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hwMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hwMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hwMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hwMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the mirror source is board, the meaning reference the object HwMirrorOrMonitorType), then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007' indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hwMirroringGroupID separately, the result of get operation for that entry will be like the example A above. If hwMirroringGroupMirrorInTypeList is not supported, the first four octets of hwMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hwMirroringGroupMirrorOutboundIfIndexList and hwMirroringGroupMirrorOutTypeList are a pair and have the same relations like hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList pair.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.16.2.27.1.1 |
hwMirroringGroupMirrorOutboundIfIndexListOutbound-Mirror ifIndex and slot number list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.16.2.27.1.2 |
hwMirroringGroupMirrorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.27.1.3 |
hwMirroringGroupMirrorInTypeListInbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.16.2.27.1.4 |
hwMirroringGroupMirrorOutTypeListOutbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.rw OCTET STRING .1.3.6.1.4.1.2011.2.23.1.16.2.27.1.5 |
hwMirroringGroupMonitorTableMirroringGroup monitor-port information. SEQUENCE OF HwMirroringGroupMonitorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.28 |
hwMirroringGroupMonitorEntryMirroringGroup monitor-port information. HwMirroringGroupMonitorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.28.1 |
hwMirroringGroupMonitorIfIndexIf the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hwMirroringGroupMonitorType.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.28.1.1 |
hwMirroringGroupMonitorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.28.1.2 |
hwMirroringGroupMonitorTypeSpecify whether the monitor destination is port or board. If this object is not supported, then the value of hwMirroringGroupMonitorIfIndex means ifIndex.rw HwMirrorOrMonitorType .1.3.6.1.4.1.2011.2.23.1.16.2.28.1.3 |
hwMirroringGroupReflectorTableMirroringGroup reflector-port information. SEQUENCE OF HwMirroringGroupReflectorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.29 |
hwMirroringGroupReflectorEntryMirroringGroup reflector-port information. HwMirroringGroupReflectorEntry .1.3.6.1.4.1.2011.2.23.1.16.2.29.1 |
hwMirroringGroupReflectorIfIndexOnly valid for remote-source MirroringGroup.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.29.1.1 |
hwMirroringGroupReflectorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.29.1.2 |
hwMirroringGroupRprobeVlanTableMirroringGroup rprobe-vlan information. SEQUENCE OF HwMirroringGroupRprobeVlanEntry .1.3.6.1.4.1.2011.2.23.1.16.2.30 |
hwMirroringGroupRprobeVlanEntryMirroringGroup rprobe-vlan information. HwMirroringGroupRprobeVlanEntry .1.3.6.1.4.1.2011.2.23.1.16.2.30.1 |
hwMirroringGroupRprobeVlanIDRemote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.16.2.30.1.1 |
hwMirroringGroupRprobeVlanRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.30.1.2 |
hwMirroringGroupMirrorMacTableMirroringGroup MAC information. SEQUENCE OF HwMirroringGroupMirrorMacEntry .1.3.6.1.4.1.2011.2.23.1.16.2.31 |
hwMirroringGroupMirrorMacEntryMirroringGroup MAC information. HwMirroringGroupMirrorMacEntry .1.3.6.1.4.1.2011.2.23.1.16.2.31.1 |
hwMirroringGroupMirrorMacSeqThe sequence MAC number of the same group. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.31.1.1 |
hwMirroringGroupMirrorMacThe MAC address of the MirroringGroup.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.31.1.2 |
hwMirrorMacVlanIDThe vlan ID of MAC address .rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.31.1.3 |
hwMirroringGroupMirroMacStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.31.1.4 |
hwMirroringGroupMirrorVlanTableMirroringGroup Vlan Information. SEQUENCE OF HwMirroringGroupMirrorVlanEntry .1.3.6.1.4.1.2011.2.23.1.16.2.32 |
hwMirroringGroupMirrorVlanEntryMirroringGroup Vlan Information. HwMirroringGroupMirrorVlanEntry .1.3.6.1.4.1.2011.2.23.1.16.2.32.1 |
hwMirroringGroupMirrorVlanSeqThe sequence vlan number of the same group. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.32.1.1 |
hwMirroringGroupMirrorVlanIDThe vlan ID of MirroringGroup.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.32.1.2 |
hwMirroringGroupMirrorVlanDirectionThe vlan direction of MirroringGroup.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.32.1.3 |
hwMirroringGroupMirroVlanStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.32.1.4 |
hwPortTrustTablePort trust information. SEQUENCE OF HwPortTrustEntry .1.3.6.1.4.1.2011.2.23.1.16.2.33 |
hwPortTrustEntryPort trust information. HwPortTrustEntry .1.3.6.1.4.1.2011.2.23.1.16.2.33.1 |
hwPortTrustIfIndexifIndex of the port which port trust is configured. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.33.1.1 |
hwPortTrustTrustTypeTrust type of port trust.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.33.1.2 |
hwPortTrustOvercastTypeOvercast type of port trust.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.33.1.3 |
hwPortTrustResetThis object is used to reset port trust to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.33.1.4 |
hwRemarkVlanIDTableRemark vlan ID information. SEQUENCE OF HwRemarkVlanIDEntry .1.3.6.1.4.1.2011.2.23.1.16.2.34 |
hwRemarkVlanIDEntryRemark vlan ID information. HwRemarkVlanIDEntry .1.3.6.1.4.1.2011.2.23.1.16.2.34.1 |
hwRemarkVlanIDAclIndexAction identifier, acl index. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.1 |
hwRemarkVlanIDIfIndexAction identifier, ifIndex. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.2 |
hwRemarkVlanIDVlanIDAction identifier, vlan ID. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.3 |
hwRemarkVlanIDDirectionAction identifier, direction of data stream. Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.4 |
hwRemarkVlanIDUserAclNumThe number of the user acl.rw Integer32(0|5000..5999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.5 |
hwRemarkVlanIDUserAclRuleThe subitem of the user acl.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.6 |
hwRemarkVlanIDIpAclNumThe num of the IP acl.rw Integer32(0|2000..3999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.7 |
hwRemarkVlanIDIpAclRuleThe subitem of the IP acl.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.8 |
hwRemarkVlanIDLinkAclNumThe num of the link acl.rw Integer32(0|4000..4999|10000..12999) .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.9 |
hwRemarkVlanIDLinkAclRuleThe subitem of the link acl.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.10 |
hwRemarkVlanIDRemarkVlanIDRemark vlan ID.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.11 |
hwRemarkVlanIDPacketTypePacket type of the remarked vlan ID.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.12 |
hwRemarkVlanIDRowStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.16.2.34.1.13 |
hwCosToDscpMapTableCOS to DSCP map information. SEQUENCE OF HwCosToDscpMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.35 |
hwCosToDscpMapEntryCOS to DSCP map information. HwCosToDscpMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.35.1 |
hwCosToDscpMapCosIndexCOS index of COS to DSCP map. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.35.1.1 |
hwCosToDscpMapDscpValueDSCP value of COS to DSCP map.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.35.1.2 |
hwCosToDscpMapReSetThis object is used to reset COS to DSCP map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.35.1.3 |
hwDscpToLocalPreMapTableDSCP to Local-precedence map information. SEQUENCE OF HwDscpToLocalPreMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.36 |
hwDscpToLocalPreMapEntryDSCP to Local-precedence map information. HwDscpToLocalPreMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.36.1 |
hwDscpToLocalPreMapDscpIndexDSCP Index of DSCP to Local-precedence map. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.36.1.1 |
hwDscpToLocalPreMapLocalPreValLocal-precedence value of DSCP to Local-precedence map.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.36.1.2 |
hwDscpToLocalPreMapResetThis object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.36.1.3 |
hwDscpToDropPreMapTableDSCP to Drop-precedence map information. SEQUENCE OF HwDscpToDropPreMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.37 |
hwDscpToDropPreMapEntryDSCP to Drop-precedence map information. HwDscpToDropPreMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.37.1 |
hwDscpToDropPreMapDscpIndexDSCP Index of DSCP to Drop-precedence map. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.37.1.1 |
hwDscpToDropPreMapDropPreValDrop-precedence value of DSCP to Drop-precedence map.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.37.1.2 |
hwDscpToDropPreMapResetThis object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.37.1.3 |
hwDscpToCosMapTableDSCP to COS map information. SEQUENCE OF HwDscpToCosMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.38 |
hwDscpToCosMapEntryDSCP to COS map information. HwDscpToCosMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.38.1 |
hwDscpToCosMapDscpIndexDSCP index of DSCP to COS map. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.38.1.1 |
hwDscpToCosMapCosValueCOS value of DSCP to COS map.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.38.1.2 |
hwDscpToCosMapResetThis object is used to reset DSCP to COS map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.38.1.3 |
hwDscpToDscpMapTableDSCP to DSCP map information. SEQUENCE OF HwDscpToDscpMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.39 |
hwDscpToDscpMapEntryDSCP to DSCP map information. HwDscpToDscpMapEntry .1.3.6.1.4.1.2011.2.23.1.16.2.39.1 |
hwDscpToDscpMapDscpIndexDSCP index of DSCP to DSCP map. Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.39.1.1 |
hwDscpToDscpMapDscpValueDSCP value of DSCP to DSCP map.rw Integer32 .1.3.6.1.4.1.2011.2.23.1.16.2.39.1.2 |
hwDscpToDscpMapResetThis object is used to reset DSCP to DSCP map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.16.2.39.1.3 |