HUAWEI-LACP-MIB
AI MIB Summary
The HUAWEI-LACP-MIB enables monitoring and management of IEEE 802.3ad Link Aggregation Control Protocol (LACP) session states, port aggregation parameters, and Layer 2 failure detection mechanisms on Huawei network devices. This module facilitates the tracking of active and standby port statuses, aggregation group configurations, and automatic protection switchover events to ensure link redundancy and traffic load balancing.
This mib module defines the Link Aggregation Control Protocol (LACP) MIB objects. LACP is the control protocol for implementing the link aggregation in the IEEE 802.3ad standard. By using this protocol, the ports between devices are automatically aggregated, port failure detection at layer 2 is performed, line aggregation protocol control is performed, and protection switchover function is triggered.
Main OID:
hwLacpExt.1.3.6.1.4.1.2011.5.102
49
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
hwLacpExtThis mib module defines the Link Aggregation Control Protocol (LACP) MIB objects.
LACP is the control protocol for implementing the link aggregation in the IEEE 802.3ad standard.
By using this protocol, the ports between devices are automatically aggregated, port
failure detection at layer 2 is performed, line aggregation protocol control is performed,
and protection switchover function is triggered. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.102 |
hwLacpMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.1 |
hwAggLinkTableDescribes the configuration of static LAGs.
The index of this table is hwAggLinkNumber. SEQUENCE OF HwAggLinkEntry .1.3.6.1.4.1.2011.5.102.1.1 |
hwAggLinkEntryDescribes the configuration of static LAGs.
The index of this entry is hwAggLinkNumber. HwAggLinkEntry .1.3.6.1.4.1.2011.5.102.1.1.1 |
hwAggLinkNumberIndicates the index of each LAG. The index uniquely identifies an LAG and equals
the ifindex value of the master port.ro Integer32 .1.3.6.1.4.1.2011.5.102.1.1.1.1 |
hwAggLinkNameThe name of an aggregation grouprw OCTET STRING .1.3.6.1.4.1.2011.5.102.1.1.1.2 |
hwAggLinkModeType of aggregation. 1 => Manual
aggregation, no LACP 2 => Membership
specified by user, LACP is used to
validate 3 => Completely dynamic
aggregation detected by LACP
Options:
1. manual(1) -indicates the type of aggregation is manual
2. static(2) -indicates the type of aggregation is static
3. dynamic(3) -indicates the type of aggregation is dynamicrw Enumeration .1.3.6.1.4.1.2011.5.102.1.1.1.3 |
hwAggLinkPortListList of ports in this AL, by bridge port number.
If the type is manual or static, you can update
this list to your hearts content. If, however,
the AL is dynamic, then the system will maintain it.
You are NOT permitted to set the value of this to all
zeroes.rw Integer32 .1.3.6.1.4.1.2011.5.102.1.1.1.4 |
hwAggLinkStateRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.102.1.1.1.5 |
hwAggPortListSelectedPortsA PortList of physical ports that have selected
to this aggregator, but which have not yet attached.ro Integer32 .1.3.6.1.4.1.2011.5.102.1.1.1.6 |
hwAggPortListSamePartnerPortsPortList of physical ports that the same Actor
SystemID and partner systemID as this aggregator,
but have differing actor and partner keys.ro Integer32 .1.3.6.1.4.1.2011.5.102.1.1.1.7 |
hwAggLinkShareTypeIndicates the load sharing type of links.
Options:
1. loadSharing(1) -indicates sharing the link load
2. nonLoadSharing(2) -indicates not sharing the link load
Currently, the system supports only loadsharing(1).ro Enumeration .1.3.6.1.4.1.2011.5.102.1.1.1.8 |
hwAggLinkProtectTypeIndicates the protection type of links.
Options:
1. backupProtect(1) -indicates the backup aggregation protection
2. nonBackupProtect(2) -indicates the non-backup aggregation protectionro Enumeration .1.3.6.1.4.1.2011.5.102.1.1.1.9 |
hwAggLinkSelectPortsIndicates the number of selected ports in the LAG.ro Integer32 .1.3.6.1.4.1.2011.5.102.1.1.1.10 |
hwAggLinkUnselectPortsIndicates the number of unselected ports in the LAG.ro Integer32 .1.3.6.1.4.1.2011.5.102.1.1.1.11 |
hwAggLinkMasterPortIndicates the ifindex of the master port in the LAG.ro Integer32 .1.3.6.1.4.1.2011.5.102.1.1.1.12 |
hwAggPortTableDescribes the configuration of the ports in static LAGs.
The index of this table is hwAggPortIndex. SEQUENCE OF HwAggPortEntry .1.3.6.1.4.1.2011.5.102.1.2 |
hwAggPortEntryDescribes the configuration of the ports in static LAGs.
The index of this entry is hwAggPortIndex. HwAggPortEntry .1.3.6.1.4.1.2011.5.102.1.2.1 |
hwAggPortIndexIndicates the index of the port in an LAG. The index uniquely identifies a port
in an LAG and equals the ifIndex value of the port. Gauge32 .1.3.6.1.4.1.2011.5.102.1.2.1.1 |
hwAggPortNotAttachedReasonIndicates why this port is selected for an aggregator
but not attached,
in-use for this aggregator.
resources are already being used.
configuration is not appropriate.
partner is not appropriaterw Integer32 .1.3.6.1.4.1.2011.5.102.1.2.1.2 |
hwAggPortLacpStateControl lacp enable or disablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.102.1.2.1.3 |
hwAggPortNotAttachedStringIndicates why this
port is selected for an aggregator
but not attachedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.102.1.2.1.4 |
hwAggPortRoleIndicates the port role.
Options:
1. selected(1) -indicates the port is selected
2. unselected(2) -indicates the port is not selectedro Enumeration .1.3.6.1.4.1.2011.5.102.1.2.1.5 |
hwAggPortTypeIndicates the port type.
Options:
1. mastPort(1) -indicates the port is a primary port
2. nonMastPort(2) -indicates the port is a secondary portro Enumeration .1.3.6.1.4.1.2011.5.102.1.2.1.6 |
hwAggPortStatusIndicates the port status.
Options:
1. fowarding(1) -indicates packets on the port can be forwarded
2. block(2) -indicates the port is blockedro Enumeration .1.3.6.1.4.1.2011.5.102.1.2.1.7 |
hwAggResourceAllocationValueThe priority value calculated to decide
which aggregations have first call on the
load-sharing aggregation resources in the hardware.
DEFVAL { 0 }ro Integer32 .1.3.6.1.4.1.2011.5.102.1.3 |
hwAggShortPeriodIndicates the value of the short period for link aggregation.
Range: 0-10
Default: 1
Unit: second
When set to 0, the short period is restored to the default value.rw Integer32 .1.3.6.1.4.1.2011.5.102.1.4 |
hwAggLongPeriodIndicates the value of the long period for link aggregation.
Range: 0, 20-40
Default: 30
Unit: second
When set to 0, the long period is restored to the default value.rw Integer32 (0 | 20..40) .1.3.6.1.4.1.2011.5.102.1.5 |
hwAggPreemptThis object enables/disables LACP priority preemption function.
Options:
1. enable(1) -indicates the LACP priority preemption function is enable
2. disable(2) -indicates the LACP priority preemption function is disable
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.102.1.6 |
hwLacpMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.2 |
hwAggSpeedChangedNotificationThis event will be triggered whenever an aggregation changes its speed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.102.2.1 |
hwAggPortInactiveNotificationThis event will be triggered whenever any port in aggregator is made inactive NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.102.2.4 |
hwLacpMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.4 |
hwLacpMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.4.1 |
hwLacpMibGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.4.2 |
hwLacpTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.5 |
hwOldUpLinkMACAddressIndicates the old up link mac-address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.102.5.1 |
hwNewUpLinkMACAddressIndicates the new up link mac-address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.102.5.2 |
hwAggLinkGroupIDIndicates the aggregation link group ID.ro Integer32 .1.3.6.1.4.1.2011.5.102.5.3 |
hwLacpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.6 |
hwLacpAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.6.1 |
hwLacpAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.6.1.0 |
hwLacpPortLinkFaultTrapThe SNMP trap that is generated when LACP link is faulty. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.102.6.1.0.1 |
hwLacpPortLinkRecoverTrapThe SNMP trap that is generated when the port receives the LACP packet normally. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.102.6.1.0.2 |
hwLacpGroupMacChangeTrapThe SNMP trap that is generated when LACP up link switch over. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.102.6.1.0.3 |
hwLacpCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.6.2 |
hwLacpCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.102.6.2.0 |
hwLacpPortStateForwardingThe SNMP trap that is generated when a port turns into
forwarding state form other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.102.6.2.0.1 |
hwLacpPortStateDiscardingThe SNMP trap that is generated when a port turns into
discarding state form forwarding state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.102.6.2.0.2 |