HUAWEI-MTA-MIB
AI MIB Summary
The HUAWEI-MTA-MIB module provides SNMP management capabilities for Huawei Media Terminal Adapter (MTA) devices, enabling the monitoring of VoIP session states, call registration status, and voice quality metrics. It facilitates the collection of operational counters and configuration parameters specific to the MTA's telephony functions, such as line status, codec negotiation, and alarm conditions.
V01_01 һƶ mta MIB:HUAWEI-MTA-MIB.mib V1.0 汾ɹMIBίԱỷ MTA MIBС鸺ƶרУ tangrong 17270/huawei, liguanrong 26321/huawei, liaoshunquan 24705/huawei, wangxinran 19281/huawei, liuguoping 17383/huawei, wangxiaoman 20905/huawei, luohui 14047/huawei, chenjiangming 18851/huawei, liuchenglong 25279/huawei, zhuyangbin 30583/huawei, weijiahong 14192/huawei, zhoupeng 22164/huawei, xucongyuan 17403/huawei
Main OID:
hwMTA.1.3.6.1.4.1.2011.6.14
49
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
hwMTAV01_01 һƶ
mta MIB:HUAWEI-MTA-MIB.mib V1.0 汾ɹMIBίԱỷ
MTA MIBС鸺ƶרУ
tangrong 17270/huawei, liguanrong 26321/huawei, liaoshunquan 24705/huawei,
wangxinran 19281/huawei, liuguoping 17383/huawei, wangxiaoman 20905/huawei,
luohui 14047/huawei, chenjiangming 18851/huawei, liuchenglong 25279/huawei,
zhuyangbin 30583/huawei, weijiahong 14192/huawei, zhoupeng 22164/huawei,
xucongyuan 17403/huawei MODULE-IDENTITY .1.3.6.1.4.1.2011.6.14 |
hwMTAMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.14.1 |
mtaTableMTA SEQUENCE OF MtaEntry .1.3.6.1.4.1.2011.6.14.1.1 |
mtaEntryMTAʵ MtaEntry .1.3.6.1.4.1.2011.6.14.1.1.1 |
hwMtaStateʾMTAĵǰ״̬,1,2ȴ,3ô,4Լ,5MTA
the current state of MTA device, including 1.normal, 2.waiting config,
3.new config error, 4.self detect failed, 5.MTA faultro Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.1 |
hwMtaHardWareVersionMTA豸ǰӲ汾
the current hardware version of MTA devicero OCTET STRING .1.3.6.1.4.1.2011.6.14.1.1.1.2 |
hwMtaSoftWareVersionMTA豸ǰ汾
the current software version of MTA devicero OCTET STRING .1.3.6.1.4.1.2011.6.14.1.1.1.3 |
hwMtaProtocolMTA豸Э, 1:HONETԶ帴Э 2: X.50 S ػ 3: X.50 S =1 4: X.50 S =0
5:I.460Э(4,5ڶ֧)
the protocol that MTA support, including:1. Defined privately by HONET, 2. x.50 s bit loop,
3. x.50 s bit=1, 4. x.50 s bit=0 5. I.460 protocol. ( the 4th and 5th is not supported now)rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.4 |
hwChannel1Modeʾͨ1ǹͬʽ첽ʽ1: ͬ 2: 첽 3:
determine working mode of channel 1: a syn. mode, an asyn. mode, or a prohibited moderw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.5 |
hwChannel1Rateʾͨ1ҵ
determine the service speed of channel 1rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.6 |
hwChannel1DteDceMTAͨ1ΪDCEΪDTEһDCE豸
determine the polarity of channel 1: DCE or DTErw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.7 |
hwChannel1Clockͨ1ʱʽInternalʾʹ豸ʱӣExternalʾϼʱӣSlaveʾ豸ʱ
the clock locked mode of channel 1: 1. Internal means the clock in MTA device,
2.External means the superior device's clock, 3. Slave means the clock of device access to this channelrw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.8 |
hwChannel1SignalLinePhase2Ƶ00001111ӵλλÿBITλαʾʱӷǷ,ʱǷ,ݷǷ,Ƿ 1: 0:
the signal line phase of channel 1, determined by four bits of which the less significant defines
the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase.
and value 1 means reverse phase, value 0 means in-phase.rw Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.9 |
hwChannel1AsynLenͨ1첽ʽµֳʼλλֹλܳ
the word length of channel 1 working in the asynchro mode, including the starting bit,the data bits and the end bitrw Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.10 |
hwChannel1BChannelNoʾͨ12B+DĸBͨϳ
determins the B channel N.O. to carry the data in channel 1rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.11 |
hwChannel1EnvolopPhaseʾͨ1ռðķʽ1:˳ 2
determins the envolop phase to carry the data in channel 1rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.12 |
hwChannel1Status(1),(2),˻(3),Զ˻(4),(5),ӦBͨ֡ʧ(6),豸δ(7),ӦBͨԶ֡ʧ(8),ӦBͨ˻(9),ӦBͨԶ˻(10),(11)
describes the current state of channel 1ro Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.13 |
hwChannel2Modeʾͨ2ǹͬʽ첽ʽ1: ͬ 2: 첽 3:
determine working mode of channel 2: a syn. mode, an asyn. mode, or a prohibited moderw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.14 |
hwChannel2Rateʾͨ2ҵ
determine the service speed of channel 2rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.15 |
hwChannel2DteDceMTAͨ2ΪDCEΪDTEһDCE豸
determine the polarity of channel 2: DCE or DTErw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.16 |
hwChannel2Clockͨ2ʱʽInternalʾʹʹ豸ʱӣExternalʾϼʱӣSlaveʾ豸ʱ
the clock locked mode of channel 2: 1. Internal means the clock in MTA device,
2.External means the superior device's clock, 3. Slave means the clock of device access to this channelrw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.17 |
hwChannel2SignalLinePhase2Ƶ00001111ӵλλÿBITλαʾʱӷǷ,ʱǷ,ݷǷ,Ƿ 1: 0:
the signal line phase of channel 2, determined by four bits of which the less significant defines
the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase.
and value 1 means reverse phase, value 0 means in-phase.rw Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.18 |
hwChannel2AsynLenͨ첽ʽµֳʼλλֹλܳ
the word length of channel 2 working in the asynchro mode, including the starting bit,the data bits and the end bitrw Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.19 |
hwChannel2BChannelNoʾͨ22B+DĸBͨϳ
determins the B channel N.O. to carry the data in channel 2rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.20 |
hwChannel2EnvolopPhaseʾͨ2ռðķʽ1:˳ 2
determins the envolop phase to carry the data in channel 2rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.21 |
hwChannel2Status(1),(2),˻(3),Զ˻(4),(5),ӦBͨ֡ʧ(6),豸δ(7),ӦBͨԶ֡ʧ(8),ӦBͨ˻(9),ӦBͨԶ˻(10),(11)
describes the current state of channel 2ro Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.22 |
hwChannel3Modeʾͨ3ǹͬʽ첽ʽ1: ͬ 2: 첽 3:
determine working mode of channel 3: a syn. mode, an asyn. mode, or a prohibited moderw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.23 |
hwChannel3Rateʾͨ3ҵ
determine the service speed of channel 3rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.24 |
hwChannel3DteDceMTAͨ3ΪDCEΪDTEһDCE豸
determine the polarity of channel 3: DCE or DTErw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.25 |
hwChannel3Clockͨ3ʱʽInternalʾʹ豸ʱӣExternalʾϼʱӣSlaveʾ豸ʱ
the clock locked mode of channel 3: 1. Internal means the clock in MTA device,
2.External means the superior device's clock, 3. Slave means the clock of device access to this channelrw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.26 |
hwChannel3SignalLinePhase2Ƶ00001111ӵλλÿBITλαʾʱӷǷ,ʱǷ,ݷǷ,Ƿ 1: 0:
the signal line phase of channel 1, determined by four bits of which the less significant defines
the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase.
and value 1 means reverse phase, value 0 means in-phase.rw Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.27 |
hwChannel3AsynLenͨ3첽ʽµֳʼλλֹλܳ
the word length of channel 3 working in the asynchro mode, including the starting bit,the data bits and the end bitrw Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.28 |
hwChannel3BChannelNoʾͨ32B+DĸBͨϳ
determins the B channel N.O. to carry the data in channel 3rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.29 |
hwChannel3EnvolopPhaseʾͨ3ռðķʽ1:˳ 2
determins the envolop phase to carry the data in channel 3rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.30 |
hwChannel3Status(1),(2),˻(3),Զ˻(4),(5),ӦBͨ֡ʧ(6),豸δ(7),ӦBͨԶ֡ʧ(8),ӦBͨ˻(9),ӦBͨԶ˻(10),(11)
describes the current state of channel 3ro Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.31 |
hwUserIdentityʾMTAıʶַͬ豸ͬ (SIZE(0..9))
the identity label of this MTA, and two or more MTAs may have the same identity labelrw OCTET STRING .1.3.6.1.4.1.2011.6.14.1.1.1.32 |
hwMaintainOper1ɲ 2ȡ 3:˻ 4Զ˻ 5λ, ʾԶMTAеά
ɲ(1)ֻΪGET, SETû, MTAȡʱȡеĻ,˲Ӧָض,
ڽ˻غԶ˻, Ҫָض,
MTAλָλMTAն, ϵͳλ֮Ҳʧ
defines the maintain operation type, no operation(1) is just for GET, and is of no meaning
for SET, CancelLoop(2) cancels all loops of the MTA, thus should not be set alongside Loop Object,
LocalLoop and RemoteLoop must be bound to the Loop Object,
reset operation will reset the MTA, and MTA will not be at loop state.rw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.33 |
hwLoopObjectʾлزʱIJ, GETڵʱnoOperation(1), SET,
noOperation(1)û
defines the loop object when setting LocalLoop or RemoteLoop operation,
Getting this object will get value noOperation(1), while is of no meaning when Settingrw Enumeration .1.3.6.1.4.1.2011.6.14.1.1.1.34 |
hwChannel1AlarmStatusΪ1ʾͨ1豸δ澯Ϊ0ʾ豸δ澯
describes the current alarm status of channel 1,
1 means the device access to MTA channel 1 is not ready,
while 0 means the device is readyro Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.35 |
hwChannel2AlarmStatusΪ1ʾͨ2豸δ澯Ϊ0ʾ豸δ澯
describes the current alarm status of channel 2,
1 means the device access to MTA channel 1 is not ready,
while 0 means the device is readyro Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.36 |
hwChannel3AlarmStatusΪ1ʾͨ3豸δ澯Ϊ0ʾ豸δ澯
describes the current alarm status of channel 3,
1 means the device access to MTA channel 1 is not ready,
while 0 means the device is readyro Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.37 |
hwBChannel1AlarmStatusBͨ1ĸ澯״̬,Ϊ2Ƶ00..11,
λΪ1ʾB1ͨڱ֡ʧ澯, Ϊ0ʾӦ澯
λΪ1ʾB1ͨڶԶ֡ʧ澯, Ϊ0ʾӦ澯
describes the current alarm status of B channel 1,
determined by two bits of which the less significant defines whether
adaptive loss of multi-frame alignment of B channel 1 happened
to MTA local equipment, 1 means yes, 0 means no,
the most significant bit defines whether adaptive loss
of multi-frame alignment of B channel 1 happened
to MTA remote equipment, 1 means yes, 0 means no,ro Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.38 |
hwBChannel2AlarmStatusB2ͨĸ澯״̬,Ϊ2Ƶ00..11,
λΪ1ʾB2ͨڱ֡ʧ澯, Ϊ0ʾӦ澯
λΪ1ʾB2ͨڶԶ֡ʧ澯, Ϊ0ʾӦ澯
describes the current alarm status of B channel 2,
determined by two bits of which the less significant defines whether
adaptive loss of multi-frame alignment of B channel 2 happened
to MTA local equipment, 1 means yes, 0 means no,
the most significant bit defines whether adaptive loss
of multi-frame alignment of B channel 1 happened
to MTA remote equipment, 1 means yes, 0 means no,ro Integer32 .1.3.6.1.4.1.2011.6.14.1.1.1.39 |
hwRowStatusĿǰֻ֧CreateAndGo(4)Destroy(6)
MTA supports the operation createAndGo(4) and Destroy(6) onlyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.14.1.1.1.40 |
hwMTAMibTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.14.2 |
hwMTATrapOid OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.14.2.1 |
hwMTATrapsDefine OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.14.2.2 |
hwMTATraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.14.2.2.0 |
hwMTAMibCompance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.14.3 |